thr3ads.net - Nouveau - [Nouveau] [PATCH v2 20/29] platform/x86: acer-wmi: Move backlight DMI quirks to acpi/video

If this information is useful, please help other people find it:
Share via:

Hans de Goede

2022-Jul-12 19:38 UTC

[Nouveau] [PATCH v2 00/29] drm/kms: Stop registering multiple /sys/class/backlight devs for a single display

Hi All,

As mentioned in my RFC titled "drm/kms: control display brightness through
drm_connector properties":
https://lore.kernel.org/dri-devel/0d188965-d809-81b5-74ce-7d30c49fee2d at
redhat.com/

The first step towards this is to deal with some existing technical debt
in backlight handling on x86/ACPI boards, specifically we need to stop
registering multiple /sys/class/backlight devs for a single display.

This series implements my RFC describing my plan for these cleanups:
https://lore.kernel.org/dri-devel/98519ba0-7f18-201a-ea34-652f50343158 at
redhat.com/

This new version addresses the few small remarks made on version 1 (mainly
changing patch 1/29) and more importantly this finishes the refactoring by
else addressing all the bits from the "Other issues" section of
the refactor RFC (resulting in patches 15-29 which are new in v2).

Please review and test! I hope to be able to make an immutable branch
based on 5.20-rc1 + this series available for merging into the various
touched subsystems once 5.20-rc2 is out.

Regards,

Hans


Hans de Goede (29):
  ACPI: video: Add acpi_video_backlight_use_native() helper
  drm/i915: Don't register backlight when another backlight should be
    used
  drm/amdgpu: Don't register backlight when another backlight should be
    used
  drm/radeon: Don't register backlight when another backlight should be
    used
  drm/nouveau: Don't register backlight when another backlight should be
    used
  ACPI: video: Drop backlight_device_get_by_type() call from
    acpi_video_get_backlight_type()
  ACPI: video: Remove acpi_video_bus from list before tearing it down
  ACPI: video: Simplify acpi_video_unregister_backlight()
  ACPI: video: Make backlight class device registration a separate step
  ACPI: video: Remove code to unregister acpi_video backlight when a
    native backlight registers
  drm/i915: Call acpi_video_register_backlight() (v2)
  drm/nouveau: Register ACPI video backlight when nv_backlight
    registration fails
  drm/amdgpu: Register ACPI video backlight when skipping amdgpu
    backlight registration
  drm/radeon: Register ACPI video backlight when skipping radeon
    backlight registration
  ACPI: video: Refactor acpi_video_get_backlight_type() a bit
  ACPI: video: Add Nvidia WMI EC brightness control detection
  ACPI: video: Add Apple GMUX brightness control detection
  platform/x86: apple-gmux: Stop calling acpi/video.h functions
  platform/x86: toshiba_acpi: Stop using
    acpi_video_set_dmi_backlight_type()
  platform/x86: acer-wmi: Move backlight DMI quirks to
    acpi/video_detect.c
  platform/x86: asus-wmi: Drop DMI chassis-type check from backlight
    handling
  platform/x86: asus-wmi: Move acpi_backlight=vendor quirks to ACPI
    video_detect.c
  platform/x86: asus-wmi: Move acpi_backlight=native quirks to ACPI
    video_detect.c
  platform/x86: samsung-laptop: Move acpi_backlight=[vendor|native]
    quirks to ACPI video_detect.c
  ACPI: video: Remove acpi_video_set_dmi_backlight_type()
  ACPI: video: Drop "Samsung X360" acpi_backlight=native quirk
  ACPI: video: Drop Clevo/TUXEDO NL5xRU and NL5xNU acpi_backlight=native
    quirks
  ACPI: video: Fix indentation of video_detect_dmi_table[] entries
  drm/todo: Add entry about dealing with brightness control on devices
    with > 1 panel

 Documentation/gpu/todo.rst                    |  68 +++
 drivers/acpi/Kconfig                          |   1 +
 drivers/acpi/acpi_video.c                     |  59 ++-
 drivers/acpi/video_detect.c                   | 415 +++++++++++-------
 drivers/gpu/drm/Kconfig                       |  12 +
 .../gpu/drm/amd/amdgpu/atombios_encoders.c    |  14 +-
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   9 +
 drivers/gpu/drm/gma500/Kconfig                |   2 +
 drivers/gpu/drm/i915/Kconfig                  |   2 +
 .../gpu/drm/i915/display/intel_backlight.c    |   7 +
 drivers/gpu/drm/i915/display/intel_display.c  |   8 +
 drivers/gpu/drm/i915/display/intel_panel.c    |   3 +
 drivers/gpu/drm/i915/i915_drv.h               |   2 +
 drivers/gpu/drm/nouveau/nouveau_backlight.c   |  14 +
 drivers/gpu/drm/radeon/atombios_encoders.c    |   7 +
 drivers/gpu/drm/radeon/radeon_encoders.c      |  11 +-
 .../gpu/drm/radeon/radeon_legacy_encoders.c   |   7 +
 drivers/platform/x86/acer-wmi.c               |  66 ---
 drivers/platform/x86/apple-gmux.c             |   3 -
 drivers/platform/x86/asus-nb-wmi.c            |  21 -
 drivers/platform/x86/asus-wmi.c               |  13 -
 drivers/platform/x86/asus-wmi.h               |   2 -
 drivers/platform/x86/eeepc-wmi.c              |  25 +-
 drivers/platform/x86/samsung-laptop.c         |  87 ----
 drivers/platform/x86/toshiba_acpi.c           |  16 -
 include/acpi/video.h                          |   9 +-
 26 files changed, 468 insertions(+), 415 deletions(-)

-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 01/29] ACPI: video: Add acpi_video_backlight_use_native() helper

ATM on x86 laptops where we want userspace to use the acpi_video backlight
device we often register both the GPU's native backlight device and
acpi_video's firmware acpi_video# backlight device. This relies on
userspace preferring firmware type backlight devices over native ones, but
registering 2 backlight devices for a single display really is undesirable.

On x86 laptops where the native GPU backlight device should be used,
the registering of other backlight devices is avoided by their drivers
using acpi_video_get_backlight_type() and only registering their backlight
if the return value matches their type.

acpi_video_get_backlight_type() uses
backlight_device_get_by_type(BACKLIGHT_RAW) to determine if a native
driver is available and will never return native if this returns
false. This means that the GPU's native backlight registering code
cannot just call acpi_video_get_backlight_type() to determine if it
should register its backlight, since acpi_video_get_backlight_type() will
never return native until the native backlight has already registered.

To fix this add a new internal native function parameter to
acpi_video_get_backlight_type(), which when set to true will make
acpi_video_get_backlight_type() behave as if a native backlight has
already been registered.

And add a new acpi_video_backlight_use_native() helper, which sets this
to true, for use in native GPU backlight code.

Changes in v2:
- Replace adding a native parameter to acpi_video_get_backlight_type() with
  adding a new acpi_video_backlight_use_native() helper.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/video_detect.c | 24 ++++++++++++++++++++----
 include/acpi/video.h        |  5 +++++
 2 files changed, 25 insertions(+), 4 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index becc198e4c22..4346c990022d 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -17,8 +17,9 @@
  * Otherwise vendor specific drivers like thinkpad_acpi, asus-laptop,
  * sony_acpi,... can take care about backlight brightness.
  *
- * Backlight drivers can use acpi_video_get_backlight_type() to determine
- * which driver should handle the backlight.
+ * Backlight drivers can use acpi_video_get_backlight_type() to determine which
+ * driver should handle the backlight. RAW/GPU-driver backlight drivers must
+ * use the acpi_video_backlight_use_native() helper for this.
  *
  * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a
module (m)
  * this file will not be compiled and acpi_video_get_backlight_type() will
@@ -548,9 +549,10 @@ static int acpi_video_backlight_notify(struct
notifier_block *nb,
  * Arguably the native on win8 check should be done first, but that would
  * be a behavior change, which may causes issues.
  */
-enum acpi_backlight_type acpi_video_get_backlight_type(void)
+static enum acpi_backlight_type __acpi_video_get_backlight_type(bool native)
 {
 	static DEFINE_MUTEX(init_mutex);
+	static bool native_available;
 	static bool init_done;
 	static long video_caps;
 
@@ -570,6 +572,8 @@ enum acpi_backlight_type acpi_video_get_backlight_type(void)
 			backlight_notifier_registered = true;
 		init_done = true;
 	}
+	if (native)
+		native_available = true;
 	mutex_unlock(&init_mutex);
 
 	if (acpi_backlight_cmdline != acpi_backlight_undef)
@@ -581,13 +585,25 @@ enum acpi_backlight_type
acpi_video_get_backlight_type(void)
 	if (!(video_caps & ACPI_VIDEO_BACKLIGHT))
 		return acpi_backlight_vendor;
 
-	if (acpi_osi_is_win8() && backlight_device_get_by_type(BACKLIGHT_RAW))
+	if (acpi_osi_is_win8() &&
+	    (native_available || backlight_device_get_by_type(BACKLIGHT_RAW)))
 		return acpi_backlight_native;
 
 	return acpi_backlight_video;
 }
+
+enum acpi_backlight_type acpi_video_get_backlight_type(void)
+{
+	return __acpi_video_get_backlight_type(false);
+}
 EXPORT_SYMBOL(acpi_video_get_backlight_type);
 
+bool acpi_video_backlight_use_native(void)
+{
+	return __acpi_video_get_backlight_type(true) == acpi_backlight_native;
+}
+EXPORT_SYMBOL(acpi_video_backlight_use_native);
+
 /*
  * Set the preferred backlight interface type based on DMI info.
  * This function allows DMI blacklists to be implemented by external
diff --git a/include/acpi/video.h b/include/acpi/video.h
index db8548ff03ce..4705e339c252 100644
--- a/include/acpi/video.h
+++ b/include/acpi/video.h
@@ -56,6 +56,7 @@ extern void acpi_video_unregister(void);
 extern int acpi_video_get_edid(struct acpi_device *device, int type,
 			       int device_id, void **edid);
 extern enum acpi_backlight_type acpi_video_get_backlight_type(void);
+extern bool acpi_video_backlight_use_native(void);
 extern void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type type);
 /*
  * Note: The value returned by acpi_video_handles_brightness_key_presses()
@@ -77,6 +78,10 @@ static inline enum acpi_backlight_type
acpi_video_get_backlight_type(void)
 {
 	return acpi_backlight_vendor;
 }
+static inline bool acpi_video_backlight_use_native(void)
+{
+	return true;
+}
 static inline void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type
type)
 {
 }
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 02/29] drm/i915: Don't register backlight when another backlight should be used

Before this commit when we want userspace to use the acpi_video backlight
device we register both the GPU's native backlight device and
acpi_video's
firmware acpi_video# backlight device. This relies on userspace preferring
firmware type backlight devices over native ones.

Registering 2 backlight devices for a single display really is
undesirable, don't register the GPU's native backlight device when
another backlight device should be used.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/gpu/drm/i915/display/intel_backlight.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_backlight.c
b/drivers/gpu/drm/i915/display/intel_backlight.c
index 110fc98ec280..567943c9ffbc 100644
--- a/drivers/gpu/drm/i915/display/intel_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_backlight.c
@@ -8,6 +8,8 @@
 #include <linux/pwm.h>
 #include <linux/string_helpers.h>
 
+#include <acpi/video.h>
+
 #include "intel_backlight.h"
 #include "intel_connector.h"
 #include "intel_de.h"
@@ -950,6 +952,11 @@ int intel_backlight_device_register(struct intel_connector
*connector)
 
 	WARN_ON(panel->backlight.max == 0);
 
+	if (!acpi_video_backlight_use_native()) {
+		DRM_INFO("Skipping intel_backlight registration\n");
+		return 0;
+	}
+
 	memset(&props, 0, sizeof(props));
 	props.type = BACKLIGHT_RAW;
 
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 03/29] drm/amdgpu: Don't register backlight when another backlight should be used

Before this commit when we want userspace to use the acpi_video backlight
device we register both the GPU's native backlight device and
acpi_video's
firmware acpi_video# backlight device. This relies on userspace preferring
firmware type backlight devices over native ones.

Registering 2 backlight devices for a single display really is
undesirable, don't register the GPU's native backlight device when
another backlight device should be used.

Changes in v2:
- To avoid linker errors when amdgpu is builtin and video_detect.c is in
  a module, select ACPI_VIDEO and its deps if ACPI && X86 are enabled.
  When these are not set, ACPI_VIDEO is disabled, ensuring the stubs
  from acpi/video.h will be used.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/gpu/drm/Kconfig                           | 6 ++++++
 drivers/gpu/drm/amd/amdgpu/atombios_encoders.c    | 7 +++++++
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++++
 3 files changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index aaa7ad1f0614..d65119860760 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -258,6 +258,12 @@ config DRM_AMDGPU
 	select HWMON
 	select BACKLIGHT_CLASS_DEVICE
 	select INTERVAL_TREE
+	# amdgpu depends on ACPI_VIDEO when X86 and ACPI are both enabled
+	# for select to work, ACPI_VIDEO's dependencies must also be selected
+	select INPUT if ACPI && X86
+	select X86_PLATFORM_DEVICES if ACPI && X86
+	select ACPI_WMI if ACPI && X86
+	select ACPI_VIDEO if ACPI && X86
 	help
 	  Choose this option if you have a recent AMD Radeon graphics card.
 
diff --git a/drivers/gpu/drm/amd/amdgpu/atombios_encoders.c
b/drivers/gpu/drm/amd/amdgpu/atombios_encoders.c
index fa7421afb9a6..abf209e36fca 100644
--- a/drivers/gpu/drm/amd/amdgpu/atombios_encoders.c
+++ b/drivers/gpu/drm/amd/amdgpu/atombios_encoders.c
@@ -26,6 +26,8 @@
 
 #include <linux/pci.h>
 
+#include <acpi/video.h>
+
 #include <drm/drm_crtc_helper.h>
 #include <drm/amdgpu_drm.h>
 #include "amdgpu.h"
@@ -184,6 +186,11 @@ void amdgpu_atombios_encoder_init_backlight(struct
amdgpu_encoder *amdgpu_encode
 	if (!(adev->mode_info.firmware_flags &
ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU))
 		return;
 
+	if (!acpi_video_backlight_use_native()) {
+		DRM_INFO("Skipping amdgpu atom DIG backlight registration\n");
+		return;
+	}
+
 	pdata = kmalloc(sizeof(struct amdgpu_backlight_privdata), GFP_KERNEL);
 	if (!pdata) {
 		DRM_ERROR("Memory allocation failed\n");
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 5eb111d35793..3b03a95e59a8 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -86,6 +86,8 @@
 #include <drm/drm_audio_component.h>
 #include <drm/drm_gem_atomic_helper.h>
 
+#include <acpi/video.h>
+
 #include "ivsrcid/dcn/irqsrcs_dcn_1_0.h"
 
 #include "dcn/dcn_1_0_offset.h"
@@ -4050,6 +4052,11 @@ amdgpu_dm_register_backlight_device(struct
amdgpu_display_manager *dm)
 	amdgpu_dm_update_backlight_caps(dm, dm->num_of_edps);
 	dm->brightness[dm->num_of_edps] = AMDGPU_MAX_BL_LEVEL;
 
+	if (!acpi_video_backlight_use_native()) {
+		DRM_INFO("Skipping amdgpu DM backlight registration\n");
+		return;
+	}
+
 	props.max_brightness = AMDGPU_MAX_BL_LEVEL;
 	props.brightness = AMDGPU_MAX_BL_LEVEL;
 	props.type = BACKLIGHT_RAW;
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 04/29] drm/radeon: Don't register backlight when another backlight should be used

Before this commit when we want userspace to use the acpi_video backlight
device we register both the GPU's native backlight device and
acpi_video's
firmware acpi_video# backlight device. This relies on userspace preferring
firmware type backlight devices over native ones.

Registering 2 backlight devices for a single display really is
undesirable, don't register the GPU's native backlight device when
another backlight device should be used.

Changes in v2:
- To avoid linker errors when radeon is builtin and video_detect.c is in
  a module, select ACPI_VIDEO and its deps if ACPI && X86 are enabled.
  When these are not set, ACPI_VIDEO is disabled, ensuring the stubs
  from acpi/video.h will be used.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/gpu/drm/Kconfig                         | 6 ++++++
 drivers/gpu/drm/radeon/atombios_encoders.c      | 7 +++++++
 drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 7 +++++++
 3 files changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index d65119860760..a07b76e06f84 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -234,6 +234,12 @@ config DRM_RADEON
 	select HWMON
 	select BACKLIGHT_CLASS_DEVICE
 	select INTERVAL_TREE
+	# radeon depends on ACPI_VIDEO when X86 and ACPI are both enabled
+	# for select to work, ACPI_VIDEO's dependencies must also be selected
+	select INPUT if ACPI && X86
+	select X86_PLATFORM_DEVICES if ACPI && X86
+	select ACPI_WMI if ACPI && X86
+	select ACPI_VIDEO if ACPI && X86
 	help
 	  Choose this option if you have an ATI Radeon graphics card.  There
 	  are both PCI and AGP versions.  You don't need to choose this to
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c
b/drivers/gpu/drm/radeon/atombios_encoders.c
index c93040e60d04..958920230d6f 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -32,6 +32,8 @@
 #include <drm/drm_file.h>
 #include <drm/radeon_drm.h>
 
+#include <acpi/video.h>
+
 #include "atom.h"
 #include "radeon_atombios.h"
 #include "radeon.h"
@@ -209,6 +211,11 @@ void radeon_atom_backlight_init(struct radeon_encoder
*radeon_encoder,
 	if (!(rdev->mode_info.firmware_flags &
ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU))
 		return;
 
+	if (!acpi_video_backlight_use_native()) {
+		DRM_INFO("Skipping radeon atom DIG backlight registration\n");
+		return;
+	}
+
 	pdata = kmalloc(sizeof(struct radeon_backlight_privdata), GFP_KERNEL);
 	if (!pdata) {
 		DRM_ERROR("Memory allocation failed\n");
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 1a66fb969ee7..d24cedf20c47 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -33,6 +33,8 @@
 #include <drm/drm_util.h>
 #include <drm/radeon_drm.h>
 
+#include <acpi/video.h>
+
 #include "radeon.h"
 #include "radeon_asic.h"
 #include "radeon_legacy_encoders.h"
@@ -387,6 +389,11 @@ void radeon_legacy_backlight_init(struct radeon_encoder
*radeon_encoder,
 		return;
 #endif
 
+	if (!acpi_video_backlight_use_native()) {
+		DRM_INFO("Skipping radeon legacy LVDS backlight registration\n");
+		return;
+	}
+
 	pdata = kmalloc(sizeof(struct radeon_backlight_privdata), GFP_KERNEL);
 	if (!pdata) {
 		DRM_ERROR("Memory allocation failed\n");
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 05/29] drm/nouveau: Don't register backlight when another backlight should be used

Before this commit when we want userspace to use the acpi_video backlight
device we register both the GPU's native backlight device and
acpi_video's
firmware acpi_video# backlight device. This relies on userspace preferring
firmware type backlight devices over native ones.

Registering 2 backlight devices for a single display really is
undesirable, don't register the GPU's native backlight device when
another backlight device should be used.

Reviewed-by: Lyude Paul <lyude at redhat.com>
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_backlight.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c
b/drivers/gpu/drm/nouveau/nouveau_backlight.c
index a2141d3d9b1d..91c504c7b82c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -34,6 +34,8 @@
 #include <linux/backlight.h>
 #include <linux/idr.h>
 
+#include <acpi/video.h>
+
 #include "nouveau_drv.h"
 #include "nouveau_reg.h"
 #include "nouveau_encoder.h"
@@ -405,6 +407,11 @@ nouveau_backlight_init(struct drm_connector *connector)
 		goto fail_alloc;
 	}
 
+	if (!acpi_video_backlight_use_native()) {
+		NV_INFO(drm, "Skipping nv_backlight registration\n");
+		goto fail_alloc;
+	}
+
 	if (!nouveau_get_backlight_name(backlight_name, bl)) {
 		NV_ERROR(drm, "Failed to retrieve a unique name for the backlight
interface\n");
 		goto fail_alloc;
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 06/29] ACPI: video: Drop backlight_device_get_by_type() call from acpi_video_get_backlight_type()

All x86/ACPI kms drivers which register native/BACKLIGHT_RAW type
backlight devices call acpi_video_backlight_use_native() now. This sets
__acpi_video_get_backlight_type()'s internal static native_available flag.

This makes the backlight_device_get_by_type(BACKLIGHT_RAW) check
unnecessary.

Relying on the cached native_available value not only is simpler, it will
also work correctly in cases where then native backlight registration was
skipped because of acpi_video_backlight_use_native() returning false.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/video_detect.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 4346c990022d..c18047da9f37 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -585,8 +585,7 @@ static enum acpi_backlight_type
__acpi_video_get_backlight_type(bool native)
 	if (!(video_caps & ACPI_VIDEO_BACKLIGHT))
 		return acpi_backlight_vendor;
 
-	if (acpi_osi_is_win8() &&
-	    (native_available || backlight_device_get_by_type(BACKLIGHT_RAW)))
+	if (acpi_osi_is_win8() && native_available)
 		return acpi_backlight_native;
 
 	return acpi_backlight_video;
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 07/29] ACPI: video: Remove acpi_video_bus from list before tearing it down

Move the list_del removing an acpi_video_bus from video_bus_head
on teardown to before the teardown is done, to avoid code iterating
over the video_bus_head list seeing acpi_video_bus objects on there
which are (partly) torn down already.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/acpi_video.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index 43177c20ce4f..09899b7f7fab 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -2117,14 +2117,14 @@ static int acpi_video_bus_remove(struct acpi_device
*device)
 
 	video = acpi_driver_data(device);
 
-	acpi_video_bus_remove_notify_handler(video);
-	acpi_video_bus_unregister_backlight(video);
-	acpi_video_bus_put_devices(video);
-
 	mutex_lock(&video_list_lock);
 	list_del(&video->entry);
 	mutex_unlock(&video_list_lock);
 
+	acpi_video_bus_remove_notify_handler(video);
+	acpi_video_bus_unregister_backlight(video);
+	acpi_video_bus_put_devices(video);
+
 	kfree(video->attached_array);
 	kfree(video);
 
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 08/29] ACPI: video: Simplify acpi_video_unregister_backlight()

When acpi_video_register() has not run yet the video_bus_head will be
empty, so there is no need to check the register_count flag first.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/acpi_video.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index 09899b7f7fab..6944794797a5 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -2263,14 +2263,10 @@ void acpi_video_unregister_backlight(void)
 {
 	struct acpi_video_bus *video;
 
-	mutex_lock(&register_count_mutex);
-	if (register_count) {
-		mutex_lock(&video_list_lock);
-		list_for_each_entry(video, &video_bus_head, entry)
-			acpi_video_bus_unregister_backlight(video);
-		mutex_unlock(&video_list_lock);
-	}
-	mutex_unlock(&register_count_mutex);
+	mutex_lock(&video_list_lock);
+	list_for_each_entry(video, &video_bus_head, entry)
+		acpi_video_bus_unregister_backlight(video);
+	mutex_unlock(&video_list_lock);
 }
 
 bool acpi_video_handles_brightness_key_presses(void)
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 09/29] ACPI: video: Make backlight class device registration a separate step

On x86/ACPI boards the acpi_video driver will usually initializing before
the kms driver (except i915). This causes /sys/class/backlight/acpi_video0
to show up and then the kms driver registers its own native backlight
device after which the drivers/acpi/video_detect.c code unregisters
the acpi_video0 device (when acpi_video_get_backlight_type()==native).

This means that userspace briefly sees 2 devices and the disappearing of
acpi_video0 after a brief time confuses the systemd backlight level
save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920

To fix this make backlight class device registration a separate step
done by a new acpi_video_register_backlight() function. The intend is for
this to be called by the drm/kms driver *after* it is done setting up its
own native backlight device. So that acpi_video_get_backlight_type() knows
if a native backlight will be available or not at acpi_video backlight
registration time, avoiding the add + remove dance.

Note the new acpi_video_register_backlight() function is also called from
a delayed work to ensure that the acpi_video backlight devices does get
registered if necessary even if there is no drm/kms driver or when it is
disabled.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/acpi_video.c | 45 ++++++++++++++++++++++++++++++++++++---
 include/acpi/video.h      |  2 ++
 2 files changed, 44 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index 6944794797a5..c4c3a9e7ce69 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -31,6 +31,12 @@
 #define ACPI_VIDEO_BUS_NAME		"Video Bus"
 #define ACPI_VIDEO_DEVICE_NAME		"Video Device"
 
+/*
+ * Display probing is known to take up to 5 seconds, so delay the fallback
+ * backlight registration by 5 seconds + 3 seconds for some extra margin.
+ */
+#define ACPI_VIDEO_REGISTER_BACKLIGHT_DELAY	(8 * HZ)
+
 #define MAX_NAME_LEN	20
 
 MODULE_AUTHOR("Bruno Ducrot");
@@ -81,6 +87,9 @@ static LIST_HEAD(video_bus_head);
 static int acpi_video_bus_add(struct acpi_device *device);
 static int acpi_video_bus_remove(struct acpi_device *device);
 static void acpi_video_bus_notify(struct acpi_device *device, u32 event);
+static void acpi_video_bus_register_backlight_work(struct work_struct
*ignored);
+static DECLARE_DELAYED_WORK(video_bus_register_backlight_work,
+			    acpi_video_bus_register_backlight_work);
 void acpi_video_detect_exit(void);
 
 /*
@@ -1865,8 +1874,6 @@ static int acpi_video_bus_register_backlight(struct
acpi_video_bus *video)
 	if (video->backlight_registered)
 		return 0;
 
-	acpi_video_run_bcl_for_osi(video);
-
 	if (acpi_video_get_backlight_type() != acpi_backlight_video)
 		return 0;
 
@@ -2092,7 +2099,11 @@ static int acpi_video_bus_add(struct acpi_device *device)
 	list_add_tail(&video->entry, &video_bus_head);
 	mutex_unlock(&video_list_lock);
 
-	acpi_video_bus_register_backlight(video);
+	/*
+	 * The userspace visible backlight_device gets registered separately
+	 * from acpi_video_register_backlight().
+	 */
+	acpi_video_run_bcl_for_osi(video);
 	acpi_video_bus_add_notify_handler(video);
 
 	return 0;
@@ -2131,6 +2142,11 @@ static int acpi_video_bus_remove(struct acpi_device
*device)
 	return 0;
 }
 
+static void acpi_video_bus_register_backlight_work(struct work_struct *ignored)
+{
+	acpi_video_register_backlight();
+}
+
 static int __init is_i740(struct pci_dev *dev)
 {
 	if (dev->device == 0x00D1)
@@ -2241,6 +2257,17 @@ int acpi_video_register(void)
 	 */
 	register_count = 1;
 
+	/*
+	 * acpi_video_bus_add() skips registering the userspace visible
+	 * backlight_device. The intend is for this to be registered by the
+	 * drm/kms driver calling acpi_video_register_backlight() *after* it is
+	 * done setting up its own native backlight device. The delayed work
+	 * ensures that acpi_video_register_backlight() always gets called
+	 * eventually, in case there is no drm/kms driver or it is disabled.
+	 */
+	schedule_delayed_work(&video_bus_register_backlight_work,
+			      ACPI_VIDEO_REGISTER_BACKLIGHT_DELAY);
+
 leave:
 	mutex_unlock(&register_count_mutex);
 	return ret;
@@ -2251,6 +2278,7 @@ void acpi_video_unregister(void)
 {
 	mutex_lock(&register_count_mutex);
 	if (register_count) {
+		cancel_delayed_work_sync(&video_bus_register_backlight_work);
 		acpi_bus_unregister_driver(&acpi_video_bus);
 		register_count = 0;
 		has_backlight = false;
@@ -2259,6 +2287,17 @@ void acpi_video_unregister(void)
 }
 EXPORT_SYMBOL(acpi_video_unregister);
 
+void acpi_video_register_backlight(void)
+{
+	struct acpi_video_bus *video;
+
+	mutex_lock(&video_list_lock);
+	list_for_each_entry(video, &video_bus_head, entry)
+		acpi_video_bus_register_backlight(video);
+	mutex_unlock(&video_list_lock);
+}
+EXPORT_SYMBOL(acpi_video_register_backlight);
+
 void acpi_video_unregister_backlight(void)
 {
 	struct acpi_video_bus *video;
diff --git a/include/acpi/video.h b/include/acpi/video.h
index 4705e339c252..0625806d3bbd 100644
--- a/include/acpi/video.h
+++ b/include/acpi/video.h
@@ -53,6 +53,7 @@ enum acpi_backlight_type {
 #if IS_ENABLED(CONFIG_ACPI_VIDEO)
 extern int acpi_video_register(void);
 extern void acpi_video_unregister(void);
+extern void acpi_video_register_backlight(void);
 extern int acpi_video_get_edid(struct acpi_device *device, int type,
 			       int device_id, void **edid);
 extern enum acpi_backlight_type acpi_video_get_backlight_type(void);
@@ -69,6 +70,7 @@ extern int acpi_video_get_levels(struct acpi_device *device,
 #else
 static inline int acpi_video_register(void) { return -ENODEV; }
 static inline void acpi_video_unregister(void) { return; }
+static inline void acpi_video_register_backlight(void) { return; }
 static inline int acpi_video_get_edid(struct acpi_device *device, int type,
 				      int device_id, void **edid)
 {
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 10/29] ACPI: video: Remove code to unregister acpi_video backlight when a native backlight registers

Remove the code to unregister acpi_video backlight devices when
a native backlight device gets registered later.

Now that the acpi_video backlight device registration is a separate step
which runs later, after the drm/kms driver is done setting up its own
native backlight device, it is no longer necessary to monitor for a
native (BACKLIGHT_RAW) device showing up later and to then unregister
the acpi_video backlight device(s).

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/acpi_video.c   |  2 --
 drivers/acpi/video_detect.c | 36 ------------------------------------
 2 files changed, 38 deletions(-)

diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index c4c3a9e7ce69..4fc2a8100865 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -90,7 +90,6 @@ static void acpi_video_bus_notify(struct acpi_device *device,
u32 event);
 static void acpi_video_bus_register_backlight_work(struct work_struct
*ignored);
 static DECLARE_DELAYED_WORK(video_bus_register_backlight_work,
 			    acpi_video_bus_register_backlight_work);
-void acpi_video_detect_exit(void);
 
 /*
  * Indices in the _BCL method response: the first two items are special,
@@ -2343,7 +2342,6 @@ static int __init acpi_video_init(void)
 
 static void __exit acpi_video_exit(void)
 {
-	acpi_video_detect_exit();
 	acpi_video_unregister();
 }
 
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index c18047da9f37..f6bdc0c77e9a 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -38,10 +38,6 @@
 
 void acpi_video_unregister_backlight(void);
 
-static bool backlight_notifier_registered;
-static struct notifier_block backlight_nb;
-static struct work_struct backlight_notify_work;
-
 static enum acpi_backlight_type acpi_backlight_cmdline = acpi_backlight_undef;
 static enum acpi_backlight_type acpi_backlight_dmi = acpi_backlight_undef;
 
@@ -515,26 +511,6 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 	{ },
 };
 
-/* This uses a workqueue to avoid various locking ordering issues */
-static void acpi_video_backlight_notify_work(struct work_struct *work)
-{
-	if (acpi_video_get_backlight_type() != acpi_backlight_video)
-		acpi_video_unregister_backlight();
-}
-
-static int acpi_video_backlight_notify(struct notifier_block *nb,
-				       unsigned long val, void *bd)
-{
-	struct backlight_device *backlight = bd;
-
-	/* A raw bl registering may change video -> native */
-	if (backlight->props.type == BACKLIGHT_RAW &&
-	    val == BACKLIGHT_REGISTERED)
-		schedule_work(&backlight_notify_work);
-
-	return NOTIFY_OK;
-}
-
 /*
  * Determine which type of backlight interface to use on this system,
  * First check cmdline, then dmi quirks, then do autodetect.
@@ -564,12 +540,6 @@ static enum acpi_backlight_type
__acpi_video_get_backlight_type(bool native)
 		acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
 				    ACPI_UINT32_MAX, find_video, NULL,
 				    &video_caps, NULL);
-		INIT_WORK(&backlight_notify_work,
-			  acpi_video_backlight_notify_work);
-		backlight_nb.notifier_call = acpi_video_backlight_notify;
-		backlight_nb.priority = 0;
-		if (backlight_register_notifier(&backlight_nb) == 0)
-			backlight_notifier_registered = true;
 		init_done = true;
 	}
 	if (native)
@@ -616,9 +586,3 @@ void acpi_video_set_dmi_backlight_type(enum
acpi_backlight_type type)
 		acpi_video_unregister_backlight();
 }
 EXPORT_SYMBOL(acpi_video_set_dmi_backlight_type);
-
-void __exit acpi_video_detect_exit(void)
-{
-	if (backlight_notifier_registered)
-		backlight_unregister_notifier(&backlight_nb);
-}
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 11/29] drm/i915: Call acpi_video_register_backlight() (v2)

On machins without an i915 opregion the acpi_video driver immediately
probes the ACPI video bus and used to also immediately register
acpi_video# backlight devices when supported.

Once the drm/kms driver then loaded later and possibly registered
a native backlight device then the drivers/acpi/video_detect.c code
unregistered the acpi_video0 device to avoid there being 2 backlight
devices (when acpi_video_get_backlight_type()==native).

This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920

To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.

Add a call to the new acpi_video_register_backlight() after the i915 calls
acpi_video_register() (after setting up the i915 opregion) so that the
acpi_video backlight devices get registered on systems where the i915
native backlight device is not registered.

Changes in v2:
-Only call acpi_video_register_backlight() when a panel is detected

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 8 ++++++++
 drivers/gpu/drm/i915/display/intel_panel.c   | 3 +++
 drivers/gpu/drm/i915/i915_drv.h              | 2 ++
 3 files changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c
b/drivers/gpu/drm/i915/display/intel_display.c
index a0f84cbe974f..6e120de83c0f 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -9086,6 +9086,14 @@ void intel_display_driver_register(struct
drm_i915_private *i915)
 	/* Must be done after probing outputs */
 	intel_opregion_register(i915);
 	acpi_video_register();
+	/*
+	 * Only call this if i915 is driving the internal panel. If the internal
+	 * panel is not driven by i915 then another GPU driver may still register
+	 * a native backlight driver later and this should only be called after
+	 * any native backlights have been registered.
+	 */
+	if (i915->have_panel)
+		acpi_video_register_backlight();
 
 	intel_audio_init(i915);
 
diff --git a/drivers/gpu/drm/i915/display/intel_panel.c
b/drivers/gpu/drm/i915/display/intel_panel.c
index 237a40623dd7..4536c527f50c 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.c
+++ b/drivers/gpu/drm/i915/display/intel_panel.c
@@ -646,8 +646,11 @@ intel_panel_mode_valid(struct intel_connector *connector,
 
 int intel_panel_init(struct intel_connector *connector)
 {
+	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
 	struct intel_panel *panel = &connector->panel;
 
+	dev_priv->have_panel = true;
+
 	intel_backlight_init_funcs(panel);
 
 	drm_dbg_kms(connector->base.dev,
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index d25647be25d1..be6e8c6d8f73 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -756,6 +756,8 @@ struct drm_i915_private {
 
 	bool ipc_enabled;
 
+	bool have_panel;
+
 	struct intel_audio_private audio;
 
 	struct i915_pmu pmu;
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 12/29] drm/nouveau: Register ACPI video backlight when nv_backlight registration fails

Typically the acpi_video driver will initialize before nouveau, which
used to cause /sys/class/backlight/acpi_video0 to get registered and then
nouveau would register its own nv_backlight device later. After which
the drivers/acpi/video_detect.c code unregistered the acpi_video0 device
to avoid there being 2 backlight devices.

This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920

To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.

Add a call to the new acpi_video_register_backlight() when native backlight
device registration has failed / was skipped to ensure that there is a
backlight device available before the drm_device gets registered with
userspace.

Reviewed-by: Lyude Paul <lyude at redhat.com>
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_backlight.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c
b/drivers/gpu/drm/nouveau/nouveau_backlight.c
index 91c504c7b82c..befff2a8b763 100644
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -437,6 +437,13 @@ nouveau_backlight_init(struct drm_connector *connector)
 
 fail_alloc:
 	kfree(bl);
+	/*
+	 * If we get here we have an internal panel, but no nv_backlight,
+	 * try registering an ACPI video backlight device instead.
+	 */
+	if (ret == 0)
+		acpi_video_register_backlight();
+
 	return ret;
 }
 
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 13/29] drm/amdgpu: Register ACPI video backlight when skipping amdgpu backlight registration

Typically the acpi_video driver will initialize before amdgpu, which
used to cause /sys/class/backlight/acpi_video0 to get registered and then
amdgpu would register its own amdgpu_bl# device later. After which
the drivers/acpi/video_detect.c code unregistered the acpi_video0 device
to avoid there being 2 backlight devices.

This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920

To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.

Add a call to the new acpi_video_register_backlight() when amdgpu skips
registering its own backlight device because of either the firmware_flags
or the acpi_video_get_backlight_type() return value. This ensures that
if the acpi_video backlight device should be used, it will be available
before the amdgpu drm_device gets registered with userspace.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/gpu/drm/amd/amdgpu/atombios_encoders.c    | 9 +++++++--
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 ++
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/atombios_encoders.c
b/drivers/gpu/drm/amd/amdgpu/atombios_encoders.c
index abf209e36fca..45cd9268b426 100644
--- a/drivers/gpu/drm/amd/amdgpu/atombios_encoders.c
+++ b/drivers/gpu/drm/amd/amdgpu/atombios_encoders.c
@@ -184,11 +184,11 @@ void amdgpu_atombios_encoder_init_backlight(struct
amdgpu_encoder *amdgpu_encode
 		return;
 
 	if (!(adev->mode_info.firmware_flags &
ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU))
-		return;
+		goto register_acpi_backlight;
 
 	if (!acpi_video_backlight_use_native()) {
 		DRM_INFO("Skipping amdgpu atom DIG backlight registration\n");
-		return;
+		goto register_acpi_backlight;
 	}
 
 	pdata = kmalloc(sizeof(struct amdgpu_backlight_privdata), GFP_KERNEL);
@@ -225,6 +225,11 @@ void amdgpu_atombios_encoder_init_backlight(struct
amdgpu_encoder *amdgpu_encode
 error:
 	kfree(pdata);
 	return;
+
+register_acpi_backlight:
+	/* Try registering an ACPI video backlight device instead. */
+	acpi_video_register_backlight();
+	return;
 }
 
 void
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 3b03a95e59a8..a667e66a9842 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -4054,6 +4054,8 @@ amdgpu_dm_register_backlight_device(struct
amdgpu_display_manager *dm)
 
 	if (!acpi_video_backlight_use_native()) {
 		DRM_INFO("Skipping amdgpu DM backlight registration\n");
+		/* Try registering an ACPI video backlight device instead. */
+		acpi_video_register_backlight();
 		return;
 	}
 
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 14/29] drm/radeon: Register ACPI video backlight when skipping radeon backlight registration

Typically the acpi_video driver will initialize before radeon, which
used to cause /sys/class/backlight/acpi_video0 to get registered and then
radeon would register its own radeon_bl# device later. After which
the drivers/acpi/video_detect.c code unregistered the acpi_video0 device
to avoid there being 2 backlight devices.

This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920

To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.

Add a call to the new acpi_video_register_backlight() when radeon skips
registering its own backlight device because of e.g. the firmware_flags
or the acpi_video_get_backlight_type() return value. This ensures that
if the acpi_video backlight device should be used, it will be available
before the radeon drm_device gets registered with userspace.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/gpu/drm/radeon/radeon_encoders.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c
b/drivers/gpu/drm/radeon/radeon_encoders.c
index 46549d5179ee..c1cbebb51be1 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -30,6 +30,8 @@
 #include <drm/drm_device.h>
 #include <drm/radeon_drm.h>
 
+#include <acpi/video.h>
+
 #include "radeon.h"
 #include "radeon_atombios.h"
 #include "radeon_legacy_encoders.h"
@@ -167,7 +169,7 @@ static void radeon_encoder_add_backlight(struct
radeon_encoder *radeon_encoder,
 		return;
 
 	if (radeon_backlight == 0) {
-		return;
+		use_bl = false;
 	} else if (radeon_backlight == 1) {
 		use_bl = true;
 	} else if (radeon_backlight == -1) {
@@ -193,6 +195,13 @@ static void radeon_encoder_add_backlight(struct
radeon_encoder *radeon_encoder,
 		else
 			radeon_legacy_backlight_init(radeon_encoder, connector);
 	}
+
+	/*
+	 * If there is no native backlight device (which may happen even when
+	 * use_bl==true) try registering an ACPI video backlight device instead.
+	 */
+	if (!rdev->mode_info.bl_encoder)
+		acpi_video_register_backlight();
 }
 
 void
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 15/29] ACPI: video: Refactor acpi_video_get_backlight_type() a bit

Refactor acpi_video_get_backlight_type() so that the heuristics /
detection steps are stricly in order of descending precedence.

Also move the comments describing the steps to when the various steps are
actually done, to avoid the comments getting out of sync with the code.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/video_detect.c | 39 ++++++++++++++++++++++---------------
 1 file changed, 23 insertions(+), 16 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index f6bdc0c77e9a..8c2863403040 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -514,16 +514,6 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 /*
  * Determine which type of backlight interface to use on this system,
  * First check cmdline, then dmi quirks, then do autodetect.
- *
- * The autodetect order is:
- * 1) Is the acpi-video backlight interface supported ->
- *  no, use a vendor interface
- * 2) Is this a win8 "ready" BIOS and do we have a native interface
->
- *  yes, use a native interface
- * 3) Else use the acpi-video interface
- *
- * Arguably the native on win8 check should be done first, but that would
- * be a behavior change, which may causes issues.
  */
 static enum acpi_backlight_type __acpi_video_get_backlight_type(bool native)
 {
@@ -546,19 +536,36 @@ static enum acpi_backlight_type
__acpi_video_get_backlight_type(bool native)
 		native_available = true;
 	mutex_unlock(&init_mutex);
 
+	/*
+	 * The below heuristics / detection steps are in order of descending
+	 * presedence. The commandline takes presedence over anything else.
+	 */
 	if (acpi_backlight_cmdline != acpi_backlight_undef)
 		return acpi_backlight_cmdline;
 
+	/* DMI quirks override any autodetection. */
 	if (acpi_backlight_dmi != acpi_backlight_undef)
 		return acpi_backlight_dmi;
 
-	if (!(video_caps & ACPI_VIDEO_BACKLIGHT))
-		return acpi_backlight_vendor;
-
-	if (acpi_osi_is_win8() && native_available)
-		return acpi_backlight_native;
+	/* On systems with ACPI video use either native or ACPI video. */
+	if (video_caps & ACPI_VIDEO_BACKLIGHT) {
+		/*
+		 * Windows 8 and newer no longer use the ACPI video interface,
+		 * so it often does not work. If the ACPI tables are written
+		 * for win8 and native brightness ctl is available, use that.
+		 *
+		 * The native check deliberately is inside the if acpi-video
+		 * block on older devices without acpi-video support native
+		 * is usually not the best choice.
+		 */
+		if (acpi_osi_is_win8() && native_available)
+			return acpi_backlight_native;
+		else
+			return acpi_backlight_video;
+	}
 
-	return acpi_backlight_video;
+	/* No ACPI video (old hw), use vendor specific fw methods. */
+	return acpi_backlight_vendor;
 }
 
 enum acpi_backlight_type acpi_video_get_backlight_type(void)
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 16/29] ACPI: video: Add Nvidia WMI EC brightness control detection

On some new laptop designs a new Nvidia specific WMI interface is present
which gives info about panel brightness control and may allow controlling
the brightness through this interface when the embedded controller is used
for brightness control.

When this WMI interface is present and indicates that the EC is used,
then this interface should be used for brightness control.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/Kconfig           |  1 +
 drivers/acpi/video_detect.c    | 35 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/gma500/Kconfig |  2 ++
 drivers/gpu/drm/i915/Kconfig   |  2 ++
 include/acpi/video.h           |  1 +
 5 files changed, 41 insertions(+)

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 1e34f846508f..c372385cfc3f 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -212,6 +212,7 @@ config ACPI_VIDEO
 	tristate "Video"
 	depends on X86 && BACKLIGHT_CLASS_DEVICE
 	depends on INPUT
+	depends on ACPI_WMI
 	select THERMAL
 	help
 	  This driver implements the ACPI Extensions For Display Adapters
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 8c2863403040..7b89dc9a04a2 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -75,6 +75,35 @@ find_video(acpi_handle handle, u32 lvl, void *context, void
**rv)
 	return AE_OK;
 }
 
+#define WMI_BRIGHTNESS_METHOD_SOURCE			2
+#define WMI_BRIGHTNESS_MODE_GET				0
+#define WMI_BRIGHTNESS_SOURCE_EC			2
+
+struct wmi_brightness_args {
+	u32 mode;
+	u32 val;
+	u32 ret;
+	u32 ignored[3];
+};
+
+static bool nvidia_wmi_ec_supported(void)
+{
+	struct wmi_brightness_args args = {
+		.mode = WMI_BRIGHTNESS_MODE_GET,
+		.val = 0,
+		.ret = 0,
+	};
+	struct acpi_buffer buf = { (acpi_size)sizeof(args), &args };
+	acpi_status status;
+
+	status = wmi_evaluate_method("603E9613-EF25-4338-A3D0-C46177516DB7",
0,
+				     WMI_BRIGHTNESS_METHOD_SOURCE, &buf, &buf);
+	if (ACPI_FAILURE(status))
+		return false;
+
+	return args.ret == WMI_BRIGHTNESS_SOURCE_EC;
+}
+
 /* Force to use vendor driver when the ACPI device is known to be
  * buggy */
 static int video_detect_force_vendor(const struct dmi_system_id *d)
@@ -518,6 +547,7 @@ static const struct dmi_system_id video_detect_dmi_table[] =
{
 static enum acpi_backlight_type __acpi_video_get_backlight_type(bool native)
 {
 	static DEFINE_MUTEX(init_mutex);
+	static bool nvidia_wmi_ec_present;
 	static bool native_available;
 	static bool init_done;
 	static long video_caps;
@@ -530,6 +560,7 @@ static enum acpi_backlight_type
__acpi_video_get_backlight_type(bool native)
 		acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
 				    ACPI_UINT32_MAX, find_video, NULL,
 				    &video_caps, NULL);
+		nvidia_wmi_ec_present = nvidia_wmi_ec_supported();
 		init_done = true;
 	}
 	if (native)
@@ -547,6 +578,10 @@ static enum acpi_backlight_type
__acpi_video_get_backlight_type(bool native)
 	if (acpi_backlight_dmi != acpi_backlight_undef)
 		return acpi_backlight_dmi;
 
+	/* Special cases such as nvidia_wmi_ec and apple gmux. */
+	if (nvidia_wmi_ec_present)
+		return acpi_backlight_nvidia_wmi_ec;
+
 	/* On systems with ACPI video use either native or ACPI video. */
 	if (video_caps & ACPI_VIDEO_BACKLIGHT) {
 		/*
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig
index 0cff20265f97..807b989e3c77 100644
--- a/drivers/gpu/drm/gma500/Kconfig
+++ b/drivers/gpu/drm/gma500/Kconfig
@@ -7,6 +7,8 @@ config DRM_GMA500
 	select ACPI_VIDEO if ACPI
 	select BACKLIGHT_CLASS_DEVICE if ACPI
 	select INPUT if ACPI
+	select X86_PLATFORM_DEVICES if ACPI
+	select ACPI_WMI if ACPI
 	help
 	  Say yes for an experimental 2D KMS framebuffer driver for the
 	  Intel GMA500 (Poulsbo), Intel GMA600 (Moorestown/Oak Trail) and
diff --git a/drivers/gpu/drm/i915/Kconfig b/drivers/gpu/drm/i915/Kconfig
index 7ae3b7d67fcf..3efce05d7b57 100644
--- a/drivers/gpu/drm/i915/Kconfig
+++ b/drivers/gpu/drm/i915/Kconfig
@@ -23,6 +23,8 @@ config DRM_I915
 	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
 	select BACKLIGHT_CLASS_DEVICE if ACPI
 	select INPUT if ACPI
+	select X86_PLATFORM_DEVICES if ACPI
+	select ACPI_WMI if ACPI
 	select ACPI_VIDEO if ACPI
 	select ACPI_BUTTON if ACPI
 	select SYNC_FILE
diff --git a/include/acpi/video.h b/include/acpi/video.h
index 0625806d3bbd..91578e77ac4e 100644
--- a/include/acpi/video.h
+++ b/include/acpi/video.h
@@ -48,6 +48,7 @@ enum acpi_backlight_type {
 	acpi_backlight_video,
 	acpi_backlight_vendor,
 	acpi_backlight_native,
+	acpi_backlight_nvidia_wmi_ec,
 };
 
 #if IS_ENABLED(CONFIG_ACPI_VIDEO)
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 17/29] ACPI: video: Add Apple GMUX brightness control detection

On Apple laptops with an Apple GMUX using this for brightness control,
should take precedence of any other brightness control methods.

Add apple-gmux detection to acpi_video_get_backlight_type() using
the already existing apple_gmux_present() helper function.

This will allow removig the (ab)use of:

	acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);

Inside the apple-gmux driver.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/video_detect.c | 4 ++++
 include/acpi/video.h        | 1 +
 2 files changed, 5 insertions(+)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 7b89dc9a04a2..ce96cd7abe0b 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -28,6 +28,7 @@
 
 #include <linux/export.h>
 #include <linux/acpi.h>
+#include <linux/apple-gmux.h>
 #include <linux/backlight.h>
 #include <linux/dmi.h>
 #include <linux/module.h>
@@ -582,6 +583,9 @@ static enum acpi_backlight_type
__acpi_video_get_backlight_type(bool native)
 	if (nvidia_wmi_ec_present)
 		return acpi_backlight_nvidia_wmi_ec;
 
+	if (apple_gmux_present())
+		return acpi_backlight_apple_gmux;
+
 	/* On systems with ACPI video use either native or ACPI video. */
 	if (video_caps & ACPI_VIDEO_BACKLIGHT) {
 		/*
diff --git a/include/acpi/video.h b/include/acpi/video.h
index 91578e77ac4e..dbd48cb8bd23 100644
--- a/include/acpi/video.h
+++ b/include/acpi/video.h
@@ -49,6 +49,7 @@ enum acpi_backlight_type {
 	acpi_backlight_vendor,
 	acpi_backlight_native,
 	acpi_backlight_nvidia_wmi_ec,
+	acpi_backlight_apple_gmux,
 };
 
 #if IS_ENABLED(CONFIG_ACPI_VIDEO)
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:38 UTC

head link

[Nouveau] [PATCH v2 18/29] platform/x86: apple-gmux: Stop calling acpi/video.h functions

Now that acpi_video_get_backlight_type() has apple-gmux detection (using
apple_gmux_present()), it is no longer necessary for the apple-gmux code
to manually remove possibly conflicting drivers.

So remove the handling for this from the apple-gmux driver.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/platform/x86/apple-gmux.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/platform/x86/apple-gmux.c
b/drivers/platform/x86/apple-gmux.c
index 57553f9b4d1d..071a5ffcb2b7 100644
--- a/drivers/platform/x86/apple-gmux.c
+++ b/drivers/platform/x86/apple-gmux.c
@@ -21,7 +21,6 @@
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/vga_switcheroo.h>
-#include <acpi/video.h>
 #include <asm/io.h>
 
 /**
@@ -697,7 +696,6 @@ static int gmux_probe(struct pnp_dev *pnp, const struct
pnp_device_id *id)
 	 * backlight control and supports more levels than other options.
 	 * Disable the other backlight choices.
 	 */
-	acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
 	apple_bl_unregister();
 
 	gmux_data->power_state = VGA_SWITCHEROO_ON;
@@ -807,7 +805,6 @@ static void gmux_remove(struct pnp_dev *pnp)
 	apple_gmux_data = NULL;
 	kfree(gmux_data);
 
-	acpi_video_register();
 	apple_bl_register();
 }
 
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:39 UTC

head link

[Nouveau] [PATCH v2 19/29] platform/x86: toshiba_acpi: Stop using acpi_video_set_dmi_backlight_type()

acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.

In case of the acpi_video backlight, acpi_video_set_dmi_backlight_type()
actually calls acpi_video_unregister_backlight() since that is often
probed earlier, leading to userspace seeing the acpi_video0 class
device being briefly available, leading to races in userspace where
udev probe-rules try to access the device and it is already gone.

In case of toshiba_acpi there are no DMI quirks to move to
acpi/video_detect.c, but it also (ab)uses it for transflective
displays. Adding transflective display support to video_detect.c would
be quite involved. But luckily there are only 2 known models with
a transflective display, so we can just add DMI quirks for those.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/video_detect.c         | 19 +++++++++++++++++++
 drivers/platform/x86/toshiba_acpi.c | 16 ----------------
 2 files changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index ce96cd7abe0b..a514adaec14d 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -188,6 +188,25 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 		},
 	},
 
+	/*
+	 * Toshiba models with Transflective display, these need to use
+	 * the toshiba_acpi vendor driver for proper Transflective handling.
+	 */
+	{
+	 .callback = video_detect_force_vendor,
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R500"),
+		},
+	},
+	{
+	 .callback = video_detect_force_vendor,
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R600"),
+		},
+	},
+
 	/*
 	 * These models have a working acpi_video backlight control, and using
 	 * native backlight causes a regression where backlight does not work
diff --git a/drivers/platform/x86/toshiba_acpi.c
b/drivers/platform/x86/toshiba_acpi.c
index 0fc9e8b8827b..030dc37d50b8 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -271,14 +271,6 @@ static const struct key_entry toshiba_acpi_alt_keymap[] = {
 	{ KE_END, 0 },
 };
 
-/*
- * List of models which have a broken acpi-video backlight interface and thus
- * need to use the toshiba (vendor) interface instead.
- */
-static const struct dmi_system_id toshiba_vendor_backlight_dmi[] = {
-	{}
-};
-
 /*
  * Utility
  */
@@ -2881,14 +2873,6 @@ static int toshiba_acpi_setup_backlight(struct
toshiba_acpi_dev *dev)
 		return 0;
 	}
 
-	/*
-	 * Tell acpi-video-detect code to prefer vendor backlight on all
-	 * systems with transflective backlight and on dmi matched systems.
-	 */
-	if (dev->tr_backlight_supported ||
-	    dmi_check_system(toshiba_vendor_backlight_dmi))
-		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
-
 	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
 		return 0;
 
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:39 UTC

head link

[Nouveau] [PATCH v2 20/29] platform/x86: acer-wmi: Move backlight DMI quirks to acpi/video_detect.c

Move the backlight DMI quirks to acpi/video_detect.c, so that
the driver no longer needs to call acpi_video_set_dmi_backlight_type().

acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.

Note that even though the DMI quirk table name was video_vendor_dmi_table,
5/6 quirks were actually quirks to use the GPU native backlight.

These 5 quirks also had a callback in their dmi_system_id entry which
disabled the acer-wmi vendor driver; and any DMI match resulted in:

	acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);

which disabled the acpi_video driver, so only the native driver was left.
The new entries for these 5/6 devices correctly marks these as needing
the native backlight driver.

Also note that other changes in this series change the native backlight
drivers to no longer unconditionally register their backlight. Instead
these drivers now do this check:

	if (acpi_video_get_backlight_type(false) != acpi_backlight_native)
		return 0; /* bail */

which without this patch would have broken these 5/6 "special" quirks.

Since I had to look at all the commits adding the quirks anyways, to make
sure that I understood the code correctly, I've also added links to
the various original bugzillas for these quirks to the new entries.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/video_detect.c     | 53 ++++++++++++++++++++++++++
 drivers/platform/x86/acer-wmi.c | 66 ---------------------------------
 2 files changed, 53 insertions(+), 66 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index a514adaec14d..cd51cb0d7821 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -147,6 +147,15 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 		DMI_MATCH(DMI_BOARD_NAME, "X360"),
 		},
 	},
+	{
+	 /* https://bugzilla.redhat.com/show_bug.cgi?id=1128309 */
+	 .callback = video_detect_force_vendor,
+	 /* Acer KAV80 */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "KAV80"),
+		},
+	},
 	{
 	.callback = video_detect_force_vendor,
 	/* Asus UL30VT */
@@ -427,6 +436,41 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 		DMI_MATCH(DMI_BOARD_NAME, "JV50"),
 		},
 	},
+	{
+	 /* https://bugzilla.redhat.com/show_bug.cgi?id=1012674 */
+	 .callback = video_detect_force_native,
+	 /* Acer Aspire 5741 */
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5741"),
+		},
+	},
+	{
+	 /* https://bugzilla.kernel.org/show_bug.cgi?id=42993 */
+	 .callback = video_detect_force_native,
+	 /* Acer Aspire 5750 */
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5750"),
+		},
+	},
+	{
+	 /* https://bugzilla.kernel.org/show_bug.cgi?id=42833 */
+	 .callback = video_detect_force_native,
+	 /* Acer Extensa 5235 */
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5235"),
+		},
+	},
+	{
+	 .callback = video_detect_force_native,
+	 /* Acer TravelMate 4750 */
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4750"),
+		},
+	},
 	{
 	 /* https://bugzilla.kernel.org/show_bug.cgi?id=207835 */
 	 .callback = video_detect_force_native,
@@ -437,6 +481,15 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 		DMI_MATCH(DMI_BOARD_NAME, "BA51_MV"),
 		},
 	},
+	{
+	 /* https://bugzilla.kernel.org/show_bug.cgi?id=36322 */
+	 .callback = video_detect_force_native,
+	 /* Acer TravelMate 5760 */
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5760"),
+		},
+	},
 	{
 	.callback = video_detect_force_native,
 	/* ASUSTeK COMPUTER INC. GA401 */
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 9c6943e401a6..c08eeb1e0e05 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -643,69 +643,6 @@ static const struct dmi_system_id non_acer_quirks[]
__initconst = {
 	{}
 };
 
-static int __init
-video_set_backlight_video_vendor(const struct dmi_system_id *d)
-{
-	interface->capability &= ~ACER_CAP_BRIGHTNESS;
-	pr_info("Brightness must be controlled by generic video driver\n");
-	return 0;
-}
-
-static const struct dmi_system_id video_vendor_dmi_table[] __initconst = {
-	{
-		.callback = video_set_backlight_video_vendor,
-		.ident = "Acer TravelMate 4750",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4750"),
-		},
-	},
-	{
-		.callback = video_set_backlight_video_vendor,
-		.ident = "Acer Extensa 5235",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5235"),
-		},
-	},
-	{
-		.callback = video_set_backlight_video_vendor,
-		.ident = "Acer TravelMate 5760",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5760"),
-		},
-	},
-	{
-		.callback = video_set_backlight_video_vendor,
-		.ident = "Acer Aspire 5750",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5750"),
-		},
-	},
-	{
-		.callback = video_set_backlight_video_vendor,
-		.ident = "Acer Aspire 5741",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5741"),
-		},
-	},
-	{
-		/*
-		 * Note no video_set_backlight_video_vendor, we must use the
-		 * acer interface, as there is no native backlight interface.
-		 */
-		.ident = "Acer KAV80",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "KAV80"),
-		},
-	},
-	{}
-};
-
 /* Find which quirks are needed for a particular vendor/ model pair */
 static void __init find_quirks(void)
 {
@@ -2482,9 +2419,6 @@ static int __init acer_wmi_init(void)
 
 	set_quirks();
 
-	if (dmi_check_system(video_vendor_dmi_table))
-		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
-
 	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
 		interface->capability &= ~ACER_CAP_BRIGHTNESS;
 
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:39 UTC

head link

[Nouveau] [PATCH v2 21/29] platform/x86: asus-wmi: Drop DMI chassis-type check from backlight handling

Remove this check from the asus-wmi backlight handling:

	/* Some Asus desktop boards export an acpi-video backlight interface,
	   stop this from showing up */
	chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
	if (chassis_type && !strcmp(chassis_type, "3"))
		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);

This acpi_video_set_dmi_backlight_type(acpi_backlight_vendor) call must be
removed because other changes in this series change the native backlight
drivers to no longer unconditionally register their backlight. Instead
these drivers now do this check:

        if (acpi_video_get_backlight_type(false) != acpi_backlight_native)
                return 0; /* bail */

So leaving this in place can break things on laptops with a broken
DMI chassis-type, which would have GPU native brightness control before
the addition of the acpi_video_get_backlight_type() != native check.

Removing this should be ok now, since the ACPI video code has improved
heuristics for this itself now (which includes a chassis-type check).

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/platform/x86/asus-wmi.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 62ce198a3463..9dab0998cd20 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -3528,7 +3528,6 @@ static int asus_wmi_add(struct platform_device *pdev)
 	struct platform_driver *pdrv = to_platform_driver(pdev->dev.driver);
 	struct asus_wmi_driver *wdrv = to_asus_wmi_driver(pdrv);
 	struct asus_wmi *asus;
-	const char *chassis_type;
 	acpi_status status;
 	int err;
 	u32 result;
@@ -3610,12 +3609,6 @@ static int asus_wmi_add(struct platform_device *pdev)
 	if (asus->driver->quirks->wmi_force_als_set)
 		asus_wmi_set_als();
 
-	/* Some Asus desktop boards export an acpi-video backlight interface,
-	   stop this from showing up */
-	chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
-	if (chassis_type && !strcmp(chassis_type, "3"))
-		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
-
 	if (asus->driver->quirks->wmi_backlight_power)
 		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
 
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:39 UTC

head link

[Nouveau] [PATCH v2 22/29] platform/x86: asus-wmi: Move acpi_backlight=vendor quirks to ACPI video_detect.c

Remove the asus-wmi quirk_entry.wmi_backlight_power quirk-flag, which
called acpi_video_set_dmi_backlight_type(acpi_backlight_vendor) and replace
it with acpi/video_detect.c video_detect_dmi_table[] entries using the
video_detect_force_vendor callback.

acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.

Note no entries are dropped from the dmi_system_id table in asus-nb-wmi.c.
This is because the entries using the removed wmi_backlight_power flag
also use other model specific quirks from the asus-wmi quirk_entry struct.
So the quirk_asus_x55u struct and the entries pointing to it cannot be
dropped.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/video_detect.c        | 40 ++++++++++++++++++++++++++++++
 drivers/platform/x86/asus-nb-wmi.c |  7 ------
 drivers/platform/x86/asus-wmi.c    |  3 ---
 drivers/platform/x86/asus-wmi.h    |  1 -
 drivers/platform/x86/eeepc-wmi.c   | 25 +------------------
 5 files changed, 41 insertions(+), 35 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index cd51cb0d7821..5d5215969f1d 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -172,6 +172,46 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 		DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"),
 		},
 	},
+	{
+	 .callback = video_detect_force_vendor,
+	 /* Asus X55U */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "X55U"),
+		},
+	},
+	{
+	 .callback = video_detect_force_vendor,
+	 /* Asus X101CH */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "X101CH"),
+		},
+	},
+	{
+	 .callback = video_detect_force_vendor,
+	 /* Asus X401U */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "X401U"),
+		},
+	},
+	{
+	 .callback = video_detect_force_vendor,
+	 /* Asus X501U */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "X501U"),
+		},
+	},
+	{
+	 .callback = video_detect_force_vendor,
+	 /* Asus 1015CX */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "1015CX"),
+		},
+	},
 	{
 	.callback = video_detect_force_vendor,
 	/* GIGABYTE GB-BXBT-2807 */
diff --git a/drivers/platform/x86/asus-nb-wmi.c
b/drivers/platform/x86/asus-nb-wmi.c
index 57a07db659cb..074b4764ee8a 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -79,12 +79,10 @@ static struct quirk_entry quirk_asus_q500a = {
 
 /*
  * For those machines that need software to control bt/wifi status
- * and can't adjust brightness through ACPI interface
  * and have duplicate events(ACPI and WMI) for display toggle
  */
 static struct quirk_entry quirk_asus_x55u = {
 	.wapf = 4,
-	.wmi_backlight_power = true,
 	.wmi_backlight_set_devstate = true,
 	.no_display_toggle = true,
 };
@@ -147,11 +145,6 @@ static const struct dmi_system_id asus_quirks[] = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "U32U"),
 		},
-		/*
-		 * Note this machine has a Brazos APU, and most Brazos Asus
-		 * machines need quirk_asus_x55u / wmi_backlight_power but
-		 * here acpi-video seems to work fine for backlight control.
-		 */
 		.driver_data = &quirk_asus_wapf4,
 	},
 	{
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 9dab0998cd20..ac3f5606e267 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -3609,9 +3609,6 @@ static int asus_wmi_add(struct platform_device *pdev)
 	if (asus->driver->quirks->wmi_force_als_set)
 		asus_wmi_set_als();
 
-	if (asus->driver->quirks->wmi_backlight_power)
-		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
-
 	if (asus->driver->quirks->wmi_backlight_native)
 		acpi_video_set_dmi_backlight_type(acpi_backlight_native);
 
diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h
index b302415bf1d9..30770e411301 100644
--- a/drivers/platform/x86/asus-wmi.h
+++ b/drivers/platform/x86/asus-wmi.h
@@ -29,7 +29,6 @@ struct quirk_entry {
 	bool hotplug_wireless;
 	bool scalar_panel_brightness;
 	bool store_backlight_power;
-	bool wmi_backlight_power;
 	bool wmi_backlight_native;
 	bool wmi_backlight_set_devstate;
 	bool wmi_force_als_set;
diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c
index ce86d84ee796..32d9f0ba6be3 100644
--- a/drivers/platform/x86/eeepc-wmi.c
+++ b/drivers/platform/x86/eeepc-wmi.c
@@ -96,11 +96,6 @@ static struct quirk_entry quirk_asus_et2012_type3 = {
 	.store_backlight_power = true,
 };
 
-static struct quirk_entry quirk_asus_x101ch = {
-	/* We need this when ACPI function doesn't do this well */
-	.wmi_backlight_power = true,
-};
-
 static struct quirk_entry *quirks;
 
 static void et2012_quirks(void)
@@ -151,25 +146,7 @@ static const struct dmi_system_id asus_quirks[] = {
 		},
 		.driver_data = &quirk_asus_unknown,
 	},
-	{
-		.callback = dmi_matched,
-		.ident = "ASUSTeK Computer INC. X101CH",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "X101CH"),
-		},
-		.driver_data = &quirk_asus_x101ch,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "ASUSTeK Computer INC. 1015CX",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "1015CX"),
-		},
-		.driver_data = &quirk_asus_x101ch,
-	},
-	{},
+	{}
 };
 
 static void eeepc_wmi_key_filter(struct asus_wmi_driver *asus_wmi, int *code,
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:39 UTC

head link

[Nouveau] [PATCH v2 23/29] platform/x86: asus-wmi: Move acpi_backlight=native quirks to ACPI video_detect.c

Remove the asus-wmi quirk_entry.wmi_backlight_native quirk-flag, which
called acpi_video_set_dmi_backlight_type(acpi_backlight_native) and replace
it with acpi/video_detect.c video_detect_dmi_table[] entries using the
video_detect_force_native callback.

acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/video_detect.c        |  8 ++++++++
 drivers/platform/x86/asus-nb-wmi.c | 14 --------------
 drivers/platform/x86/asus-wmi.c    |  3 ---
 drivers/platform/x86/asus-wmi.h    |  1 -
 4 files changed, 8 insertions(+), 18 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 5d5215969f1d..a92322f4caff 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -554,6 +554,14 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 		DMI_MATCH(DMI_PRODUCT_NAME, "GA503"),
 		},
 	},
+	{
+	 .callback = video_detect_force_native,
+	 /* Asus UX303UB */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "UX303UB"),
+		},
+	},
 	/*
 	 * Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a
 	 * working native and video interface. However the default detection
diff --git a/drivers/platform/x86/asus-nb-wmi.c
b/drivers/platform/x86/asus-nb-wmi.c
index 074b4764ee8a..325ccd030a32 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -97,11 +97,6 @@ static struct quirk_entry quirk_asus_x200ca = {
 	.wmi_backlight_set_devstate = true,
 };
 
-static struct quirk_entry quirk_asus_ux303ub = {
-	.wmi_backlight_native = true,
-	.wmi_backlight_set_devstate = true,
-};
-
 static struct quirk_entry quirk_asus_x550lb = {
 	.wmi_backlight_set_devstate = true,
 	.xusb2pr = 0x01D9,
@@ -372,15 +367,6 @@ static const struct dmi_system_id asus_quirks[] = {
 		},
 		.driver_data = &quirk_asus_x200ca,
 	},
-	{
-		.callback = dmi_matched,
-		.ident = "ASUSTeK COMPUTER INC. UX303UB",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "UX303UB"),
-		},
-		.driver_data = &quirk_asus_ux303ub,
-	},
 	{
 		.callback = dmi_matched,
 		.ident = "ASUSTeK COMPUTER INC. UX330UAK",
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index ac3f5606e267..a0df14d35574 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -3609,9 +3609,6 @@ static int asus_wmi_add(struct platform_device *pdev)
 	if (asus->driver->quirks->wmi_force_als_set)
 		asus_wmi_set_als();
 
-	if (asus->driver->quirks->wmi_backlight_native)
-		acpi_video_set_dmi_backlight_type(acpi_backlight_native);
-
 	if (asus->driver->quirks->xusb2pr)
 		asus_wmi_set_xusb2pr(asus);
 
diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h
index 30770e411301..f30252efe1db 100644
--- a/drivers/platform/x86/asus-wmi.h
+++ b/drivers/platform/x86/asus-wmi.h
@@ -29,7 +29,6 @@ struct quirk_entry {
 	bool hotplug_wireless;
 	bool scalar_panel_brightness;
 	bool store_backlight_power;
-	bool wmi_backlight_native;
 	bool wmi_backlight_set_devstate;
 	bool wmi_force_als_set;
 	bool use_kbd_dock_devid;
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:39 UTC

head link

[Nouveau] [PATCH v2 24/29] platform/x86: samsung-laptop: Move acpi_backlight=[vendor|native] quirks to ACPI video_detect.c

acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.

Move all the acpi_backlight=[vendor|native] quirks from samsung-laptop to
drivers/acpi/video_detect.c .

Note the X360 -> acpi_backlight=native quirk is not moved because that
already was present in drivers/acpi/video_detect.c .

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/video_detect.c           | 54 +++++++++++++++++
 drivers/platform/x86/samsung-laptop.c | 87 ---------------------------
 2 files changed, 54 insertions(+), 87 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index a92322f4caff..84dce2c113ef 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -220,6 +220,33 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 		DMI_MATCH(DMI_PRODUCT_NAME, "GB-BXBT-2807"),
 		},
 	},
+	{
+	 .callback = video_detect_force_vendor,
+	 /* Samsung N150/N210/N220 */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"),
+		DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"),
+		},
+	},
+	{
+	 .callback = video_detect_force_vendor,
+	 /* Samsung NF110/NF210/NF310 */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"),
+		DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"),
+		},
+	},
+	{
+	 .callback = video_detect_force_vendor,
+	 /* Samsung NC210 */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"),
+		DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"),
+		},
+	},
 	{
 	.callback = video_detect_force_vendor,
 	/* Sony VPCEH3U1E */
@@ -562,6 +589,33 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 		DMI_MATCH(DMI_PRODUCT_NAME, "UX303UB"),
 		},
 	},
+	{
+	 .callback = video_detect_force_native,
+	 /* Samsung N150P */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "N150P"),
+		DMI_MATCH(DMI_BOARD_NAME, "N150P"),
+		},
+	},
+	{
+	 .callback = video_detect_force_native,
+	 /* Samsung N145P/N250P/N260P */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"),
+		DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"),
+		},
+	},
+	{
+	 .callback = video_detect_force_native,
+	 /* Samsung N250P */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "N250P"),
+		DMI_MATCH(DMI_BOARD_NAME, "N250P"),
+		},
+	},
 	/*
 	 * Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a
 	 * working native and video interface. However the default detection
diff --git a/drivers/platform/x86/samsung-laptop.c
b/drivers/platform/x86/samsung-laptop.c
index c187dcdf82f0..cc30cf08f32d 100644
--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -356,23 +356,13 @@ struct samsung_laptop {
 };
 
 struct samsung_quirks {
-	bool broken_acpi_video;
 	bool four_kbd_backlight_levels;
 	bool enable_kbd_backlight;
-	bool use_native_backlight;
 	bool lid_handling;
 };
 
 static struct samsung_quirks samsung_unknown = {};
 
-static struct samsung_quirks samsung_broken_acpi_video = {
-	.broken_acpi_video = true,
-};
-
-static struct samsung_quirks samsung_use_native_backlight = {
-	.use_native_backlight = true,
-};
-
 static struct samsung_quirks samsung_np740u3e = {
 	.four_kbd_backlight_levels = true,
 	.enable_kbd_backlight = true,
@@ -1540,76 +1530,6 @@ static const struct dmi_system_id samsung_dmi_table[]
__initconst = {
 		},
 	},
 	/* Specific DMI ids for laptop with quirks */
-	{
-	 .callback = samsung_dmi_matched,
-	 .ident = "N150P",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "N150P"),
-		DMI_MATCH(DMI_BOARD_NAME, "N150P"),
-		},
-	 .driver_data = &samsung_use_native_backlight,
-	},
-	{
-	 .callback = samsung_dmi_matched,
-	 .ident = "N145P/N250P/N260P",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"),
-		DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"),
-		},
-	 .driver_data = &samsung_use_native_backlight,
-	},
-	{
-	 .callback = samsung_dmi_matched,
-	 .ident = "N150/N210/N220",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"),
-		DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"),
-		},
-	 .driver_data = &samsung_broken_acpi_video,
-	},
-	{
-	 .callback = samsung_dmi_matched,
-	 .ident = "NF110/NF210/NF310",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"),
-		DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"),
-		},
-	 .driver_data = &samsung_broken_acpi_video,
-	},
-	{
-	 .callback = samsung_dmi_matched,
-	 .ident = "X360",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "X360"),
-		DMI_MATCH(DMI_BOARD_NAME, "X360"),
-		},
-	 .driver_data = &samsung_broken_acpi_video,
-	},
-	{
-	 .callback = samsung_dmi_matched,
-	 .ident = "N250P",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "N250P"),
-		DMI_MATCH(DMI_BOARD_NAME, "N250P"),
-		},
-	 .driver_data = &samsung_use_native_backlight,
-	},
-	{
-	 .callback = samsung_dmi_matched,
-	 .ident = "NC210",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"),
-		DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"),
-		},
-	 .driver_data = &samsung_broken_acpi_video,
-	},
 	{
 	 .callback = samsung_dmi_matched,
 	 .ident = "730U3E/740U3E",
@@ -1654,15 +1574,8 @@ static int __init samsung_init(void)
 	samsung->handle_backlight = true;
 	samsung->quirks = quirks;
 
-#ifdef CONFIG_ACPI
-	if (samsung->quirks->broken_acpi_video)
-		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
-	if (samsung->quirks->use_native_backlight)
-		acpi_video_set_dmi_backlight_type(acpi_backlight_native);
-
 	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
 		samsung->handle_backlight = false;
-#endif
 
 	ret = samsung_platform_init(samsung);
 	if (ret)
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:39 UTC

head link

[Nouveau] [PATCH v2 25/29] ACPI: video: Remove acpi_video_set_dmi_backlight_type()

acpi_video_set_dmi_backlight_type() is troublesome because it may end
up getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.

In case of the acpi_video backlight, acpi_video_set_dmi_backlight_type()
actually calls acpi_video_unregister_backlight() since that is often
probed earlier, leading to userspace seeing the acpi_video0 class
device being briefly available, leading to races in userspace where
udev probe-rules try to access the device and it is already gone.

All callers have been fixed to no longer call it, so remove
acpi_video_set_dmi_backlight_type() now.

This means we now also no longer need acpi_video_unregister_backlight()
for the remove acpi_video backlight after it was wrongly registered hack,
so remove that too.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/acpi_video.c   | 10 ----------
 drivers/acpi/video_detect.c | 16 ----------------
 include/acpi/video.h        |  4 ----
 3 files changed, 30 deletions(-)

diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index 4fc2a8100865..dc3c037d6313 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -2297,16 +2297,6 @@ void acpi_video_register_backlight(void)
 }
 EXPORT_SYMBOL(acpi_video_register_backlight);
 
-void acpi_video_unregister_backlight(void)
-{
-	struct acpi_video_bus *video;
-
-	mutex_lock(&video_list_lock);
-	list_for_each_entry(video, &video_bus_head, entry)
-		acpi_video_bus_unregister_backlight(video);
-	mutex_unlock(&video_list_lock);
-}
-
 bool acpi_video_handles_brightness_key_presses(void)
 {
 	return has_backlight &&
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 84dce2c113ef..351bd6335d7a 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -37,8 +37,6 @@
 #include <linux/workqueue.h>
 #include <acpi/video.h>
 
-void acpi_video_unregister_backlight(void);
-
 static enum acpi_backlight_type acpi_backlight_cmdline = acpi_backlight_undef;
 static enum acpi_backlight_type acpi_backlight_dmi = acpi_backlight_undef;
 
@@ -792,17 +790,3 @@ bool acpi_video_backlight_use_native(void)
 	return __acpi_video_get_backlight_type(true) == acpi_backlight_native;
 }
 EXPORT_SYMBOL(acpi_video_backlight_use_native);
-
-/*
- * Set the preferred backlight interface type based on DMI info.
- * This function allows DMI blacklists to be implemented by external
- * platform drivers instead of putting a big blacklist in video_detect.c
- */
-void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type type)
-{
-	acpi_backlight_dmi = type;
-	/* Remove acpi-video backlight interface if it is no longer desired */
-	if (acpi_video_get_backlight_type() != acpi_backlight_video)
-		acpi_video_unregister_backlight();
-}
-EXPORT_SYMBOL(acpi_video_set_dmi_backlight_type);
diff --git a/include/acpi/video.h b/include/acpi/video.h
index dbd48cb8bd23..a275c35e5249 100644
--- a/include/acpi/video.h
+++ b/include/acpi/video.h
@@ -60,7 +60,6 @@ extern int acpi_video_get_edid(struct acpi_device *device, int
type,
 			       int device_id, void **edid);
 extern enum acpi_backlight_type acpi_video_get_backlight_type(void);
 extern bool acpi_video_backlight_use_native(void);
-extern void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type type);
 /*
  * Note: The value returned by acpi_video_handles_brightness_key_presses()
  * may change over time and should not be cached.
@@ -86,9 +85,6 @@ static inline bool acpi_video_backlight_use_native(void)
 {
 	return true;
 }
-static inline void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type
type)
-{
-}
 static inline bool acpi_video_handles_brightness_key_presses(void)
 {
 	return false;
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:39 UTC

head link

[Nouveau] [PATCH v2 26/29] ACPI: video: Drop "Samsung X360" acpi_backlight=native quirk

acpi_backlight=native is the default for the "Samsung X360", but as
the comment explains the quirk was still necessary because even
briefly registering the acpi_video0 backlight; and then unregistering
it once the native driver showed up, was leading to issues.

After the "ACPI: video: Make backlight class device registration
a separate step" patch from earlier in this patch-series, we no
longer briefly register the acpi_video0 backlight on systems where
the native driver should be used.

So this is no longer an issue an the quirk is no longer needed.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/video_detect.c | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 351bd6335d7a..2a4d376a703e 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -130,21 +130,6 @@ static int video_detect_force_none(const struct
dmi_system_id *d)
 }
 
 static const struct dmi_system_id video_detect_dmi_table[] = {
-	/* On Samsung X360, the BIOS will set a flag (VDRV) if generic
-	 * ACPI backlight device is used. This flag will definitively break
-	 * the backlight interface (even the vendor interface) until next
-	 * reboot. It's why we should prevent video.ko from being used here
-	 * and we can't rely on a later call to acpi_video_unregister().
-	 */
-	{
-	 .callback = video_detect_force_vendor,
-	 /* X360 */
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "X360"),
-		DMI_MATCH(DMI_BOARD_NAME, "X360"),
-		},
-	},
 	{
 	 /* https://bugzilla.redhat.com/show_bug.cgi?id=1128309 */
 	 .callback = video_detect_force_vendor,
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:39 UTC

head link

[Nouveau] [PATCH v2 27/29] ACPI: video: Drop Clevo/TUXEDO NL5xRU and NL5xNU acpi_backlight=native quirks

acpi_backlight=native is the default for these, but as the comment
explains the quirk was still necessary because even briefly registering
the acpi_video0 backlight; and then unregistering it once the native
driver showed up, was leading to issues.

After the "ACPI: video: Make backlight class device registration
a separate step" patch from earlier in this patch-series, we no
longer briefly register the acpi_video0 backlight on systems where
the native driver should be used.

So this is no longer an issue an the quirks are no longer needed.

Cc: Werner Sembach <wse at tuxedocomputers.com>
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/video_detect.c | 75 -------------------------------------
 1 file changed, 75 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 2a4d376a703e..4b9395d1bda7 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -599,81 +599,6 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 		DMI_MATCH(DMI_BOARD_NAME, "N250P"),
 		},
 	},
-	/*
-	 * Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a
-	 * working native and video interface. However the default detection
-	 * mechanism first registers the video interface before unregistering
-	 * it again and switching to the native interface during boot. This
-	 * results in a dangling SBIOS request for backlight change for some
-	 * reason, causing the backlight to switch to ~2% once per boot on the
-	 * first power cord connect or disconnect event. Setting the native
-	 * interface explicitly circumvents this buggy behaviour, by avoiding
-	 * the unregistering process.
-	 */
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
-		DMI_MATCH(DMI_BOARD_NAME, "AURA1501"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
-		DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xNU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xNU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xNU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
-		},
-	},
 
 	/*
 	 * Desktops which falsely report a backlight and which our heuristics
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:39 UTC

head link

[Nouveau] [PATCH v2 28/29] ACPI: video: Fix indentation of video_detect_dmi_table[] entries

The video_detect_dmi_table[] uses an unusual indentation for
before the ".name = ..." named struct initializers.

Instead of being indented with an extra tab compared to
the previous line's '{' these are indented to with only
a single space to allow for long DMI_MATCH() lines without
wrapping.

But over time some entries did not event have the single space
indent in front of the ".name = ..." lines.

Make things consistent by using a single space indent for these
lines everywhere.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/acpi/video_detect.c | 48 ++++++++++++++++++-------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 4b9395d1bda7..60d6fb056cac 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -140,17 +140,17 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 		},
 	},
 	{
-	.callback = video_detect_force_vendor,
-	/* Asus UL30VT */
-	.matches = {
+	 .callback = video_detect_force_vendor,
+	 /* Asus UL30VT */
+	 .matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 		DMI_MATCH(DMI_PRODUCT_NAME, "UL30VT"),
 		},
 	},
 	{
-	.callback = video_detect_force_vendor,
-	/* Asus UL30A */
-	.matches = {
+	 .callback = video_detect_force_vendor,
+	 /* Asus UL30A */
+	 .matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 		DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"),
 		},
@@ -196,9 +196,9 @@ static const struct dmi_system_id video_detect_dmi_table[] =
{
 		},
 	},
 	{
-	.callback = video_detect_force_vendor,
-	/* GIGABYTE GB-BXBT-2807 */
-	.matches = {
+	 .callback = video_detect_force_vendor,
+	 /* GIGABYTE GB-BXBT-2807 */
+	 .matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "GB-BXBT-2807"),
 		},
@@ -231,17 +231,17 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 		},
 	},
 	{
-	.callback = video_detect_force_vendor,
-	/* Sony VPCEH3U1E */
-	.matches = {
+	 .callback = video_detect_force_vendor,
+	 /* Sony VPCEH3U1E */
+	 .matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEH3U1E"),
 		},
 	},
 	{
-	.callback = video_detect_force_vendor,
-	/* Xiaomi Mi Pad 2 */
-	.matches = {
+	 .callback = video_detect_force_vendor,
+	 /* Xiaomi Mi Pad 2 */
+	 .matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"),
 		},
@@ -541,25 +541,25 @@ static const struct dmi_system_id video_detect_dmi_table[]
= {
 		},
 	},
 	{
-	.callback = video_detect_force_native,
-	/* ASUSTeK COMPUTER INC. GA401 */
-	.matches = {
+	 .callback = video_detect_force_native,
+	 /* ASUSTeK COMPUTER INC. GA401 */
+	 .matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 		DMI_MATCH(DMI_PRODUCT_NAME, "GA401"),
 		},
 	},
 	{
-	.callback = video_detect_force_native,
-	/* ASUSTeK COMPUTER INC. GA502 */
-	.matches = {
+	 .callback = video_detect_force_native,
+	 /* ASUSTeK COMPUTER INC. GA502 */
+	 .matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 		DMI_MATCH(DMI_PRODUCT_NAME, "GA502"),
 		},
 	},
 	{
-	.callback = video_detect_force_native,
-	/* ASUSTeK COMPUTER INC. GA503 */
-	.matches = {
+	 .callback = video_detect_force_native,
+	 /* ASUSTeK COMPUTER INC. GA503 */
+	 .matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 		DMI_MATCH(DMI_PRODUCT_NAME, "GA503"),
 		},
-- 
2.36.0

Hans de Goede

2022-Jul-12 19:39 UTC

head link

[Nouveau] [PATCH v2 29/29] drm/todo: Add entry about dealing with brightness control on devices with > 1 panel

Add an entry summarizing the discussion about dealing with brightness
control on devices with more then 1 internal panel.

The original discussion can be found here:
https://lore.kernel.org/dri-devel/20220517152331.16217-1-hdegoede at redhat.com/

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 Documentation/gpu/todo.rst | 68 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 10bfb50908d1..8548bab88062 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -704,6 +704,74 @@ Contact: Sam Ravnborg
 
 Level: Advanced
 
+Brightness handling on devices with multiple internal panels
+===========================================================+
+On x86/ACPI devices there can be multiple backlight firmware interfaces:
+(ACPI) video, vendor specific and others. As well as direct/native (PWM)
+register programming by the KMS driver.
+
+To deal with this backlight drivers used on x86/ACPI call
+acpi_video_get_backlight_type() which has heuristics (+quirks) to select
+which backlight interface to use; and backlight drivers which do not match
+the returned type will not register themselves, so that only one backlight
+device gets registered (in a single GPU setup, see below).
+
+At the moment this more or less assumes that there will only
+be 1 (internal) panel on a system.
+
+On systems with 2 panels this may be a problem, depending on
+what interface acpi_video_get_backlight_type() selects:
+
+1. native: in this case the KMS driver is expected to know which backlight
+   device belongs to which output so everything should just work.
+2. video: this does support controlling multiple backlights, but some work
+   will need to be done to get the output <-> backlight device mapping
+
+The above assumes both panels will require the same backlight interface type.
+Things will break on systems with multiple panels where the 2 panels need
+a different type of control. E.g. one panel needs ACPI video backlight control,
+where as the other is using native backlight control. Currently in this case
+only one of the 2 required backlight devices will get registered, based on
+the acpi_video_get_backlight_type() return value.
+
+If this (theoretical) case ever shows up, then supporting this will need some
+work. A possible solution here would be to pass a device and connector-name
+to acpi_video_get_backlight_type() so that it can deal with this.
+
+Note in a way we already have a case where userspace sees 2 panels,
+in dual GPU laptop setups with a mux. On those systems we may see
+either 2 native backlight devices; or 2 native backlight devices.
+
+Userspace already has code to deal with this by detecting if the related
+panel is active (iow which way the mux between the GPU and the panels
+points) and then uses that backlight device. Userspace here very much
+assumes a single panel though. It picks only 1 of the 2 backlight devices
+and then only uses that one.
+
+Note that all userspace code (that I know off) is currently hardcoded
+to assume a single panel.
+
+Before the recent changes to not register multiple (e.g. video + native)
+/sys/class/backlight devices for a single panel (on a single GPU laptop),
+userspace would see multiple backlight devices all controlling the same
+backlight.
+
+To deal with this userspace had to always picks one preferred device under
+/sys/class/backlight and will ignore the others. So to support brightness
+control on multiple panels userspace will need to be updated too.
+
+There are plans to allow brightness control through the KMS API by adding
+a "display brightness" property to drm_connector objects for panels.
This
+solves a number of issues with the /sys/class/backlight API, including not
+being able to map a sysfs backlight device to a specific connector. Any
+userspace changes to add support for brightness control on devices with
+multiple panels really should build on top of this new KMS property.
+
+Contact: Hans de Goede
+
+Level: Advanced
+
 Outside DRM
 ========== 
-- 
2.36.0

Rafael J. Wysocki

2022-Jul-14 18:42 UTC

head link

[Nouveau] [PATCH v2 00/29] drm/kms: Stop registering multiple /sys/class/backlight devs for a single display

On Tue, Jul 12, 2022 at 9:39 PM Hans de Goede <hdegoede at redhat.com>
wrote:>
> Hi All,
>
> As mentioned in my RFC titled "drm/kms: control display brightness
through
> drm_connector properties":
> https://lore.kernel.org/dri-devel/0d188965-d809-81b5-74ce-7d30c49fee2d at
redhat.com/
>
> The first step towards this is to deal with some existing technical debt
> in backlight handling on x86/ACPI boards, specifically we need to stop
> registering multiple /sys/class/backlight devs for a single display.
>
> This series implements my RFC describing my plan for these cleanups:
> https://lore.kernel.org/dri-devel/98519ba0-7f18-201a-ea34-652f50343158 at
redhat.com/
>
> This new version addresses the few small remarks made on version 1 (mainly
> changing patch 1/29) and more importantly this finishes the refactoring by
> else addressing all the bits from the "Other issues" section of
> the refactor RFC (resulting in patches 15-29 which are new in v2).
>
> Please review and test! I hope to be able to make an immutable branch
> based on 5.20-rc1 + this series available for merging into the various
> touched subsystems once 5.20-rc2 is out.
Please feel free to add

Acked-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>

to all of the ACPI video patches in this series.

Thanks!
> Hans de Goede (29):
>   ACPI: video: Add acpi_video_backlight_use_native() helper
>   drm/i915: Don't register backlight when another backlight should be
>     used
>   drm/amdgpu: Don't register backlight when another backlight should be
>     used
>   drm/radeon: Don't register backlight when another backlight should be
>     used
>   drm/nouveau: Don't register backlight when another backlight should
be
>     used
>   ACPI: video: Drop backlight_device_get_by_type() call from
>     acpi_video_get_backlight_type()
>   ACPI: video: Remove acpi_video_bus from list before tearing it down
>   ACPI: video: Simplify acpi_video_unregister_backlight()
>   ACPI: video: Make backlight class device registration a separate step
>   ACPI: video: Remove code to unregister acpi_video backlight when a
>     native backlight registers
>   drm/i915: Call acpi_video_register_backlight() (v2)
>   drm/nouveau: Register ACPI video backlight when nv_backlight
>     registration fails
>   drm/amdgpu: Register ACPI video backlight when skipping amdgpu
>     backlight registration
>   drm/radeon: Register ACPI video backlight when skipping radeon
>     backlight registration
>   ACPI: video: Refactor acpi_video_get_backlight_type() a bit
>   ACPI: video: Add Nvidia WMI EC brightness control detection
>   ACPI: video: Add Apple GMUX brightness control detection
>   platform/x86: apple-gmux: Stop calling acpi/video.h functions
>   platform/x86: toshiba_acpi: Stop using
>     acpi_video_set_dmi_backlight_type()
>   platform/x86: acer-wmi: Move backlight DMI quirks to
>     acpi/video_detect.c
>   platform/x86: asus-wmi: Drop DMI chassis-type check from backlight
>     handling
>   platform/x86: asus-wmi: Move acpi_backlight=vendor quirks to ACPI
>     video_detect.c
>   platform/x86: asus-wmi: Move acpi_backlight=native quirks to ACPI
>     video_detect.c
>   platform/x86: samsung-laptop: Move acpi_backlight=[vendor|native]
>     quirks to ACPI video_detect.c
>   ACPI: video: Remove acpi_video_set_dmi_backlight_type()
>   ACPI: video: Drop "Samsung X360" acpi_backlight=native quirk
>   ACPI: video: Drop Clevo/TUXEDO NL5xRU and NL5xNU acpi_backlight=native
>     quirks
>   ACPI: video: Fix indentation of video_detect_dmi_table[] entries
>   drm/todo: Add entry about dealing with brightness control on devices
>     with > 1 panel
>
>  Documentation/gpu/todo.rst                    |  68 +++
>  drivers/acpi/Kconfig                          |   1 +
>  drivers/acpi/acpi_video.c                     |  59 ++-
>  drivers/acpi/video_detect.c                   | 415 +++++++++++-------
>  drivers/gpu/drm/Kconfig                       |  12 +
>  .../gpu/drm/amd/amdgpu/atombios_encoders.c    |  14 +-
>  .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   9 +
>  drivers/gpu/drm/gma500/Kconfig                |   2 +
>  drivers/gpu/drm/i915/Kconfig                  |   2 +
>  .../gpu/drm/i915/display/intel_backlight.c    |   7 +
>  drivers/gpu/drm/i915/display/intel_display.c  |   8 +
>  drivers/gpu/drm/i915/display/intel_panel.c    |   3 +
>  drivers/gpu/drm/i915/i915_drv.h               |   2 +
>  drivers/gpu/drm/nouveau/nouveau_backlight.c   |  14 +
>  drivers/gpu/drm/radeon/atombios_encoders.c    |   7 +
>  drivers/gpu/drm/radeon/radeon_encoders.c      |  11 +-
>  .../gpu/drm/radeon/radeon_legacy_encoders.c   |   7 +
>  drivers/platform/x86/acer-wmi.c               |  66 ---
>  drivers/platform/x86/apple-gmux.c             |   3 -
>  drivers/platform/x86/asus-nb-wmi.c            |  21 -
>  drivers/platform/x86/asus-wmi.c               |  13 -
>  drivers/platform/x86/asus-wmi.h               |   2 -
>  drivers/platform/x86/eeepc-wmi.c              |  25 +-
>  drivers/platform/x86/samsung-laptop.c         |  87 ----
>  drivers/platform/x86/toshiba_acpi.c           |  16 -
>  include/acpi/video.h                          |   9 +-
>  26 files changed, 468 insertions(+), 415 deletions(-)
>
> --
> 2.36.0
>

Lyude Paul

2022-Jul-14 21:49 UTC

head link

[Nouveau] [PATCH v2 00/29] drm/kms: Stop registering multiple /sys/class/backlight devs for a single display

I assume you're probably good on review for the non-nouveau stuff, but if
you
end up needing any help with that feel free to poke me!

On Tue, 2022-07-12 at 21:38 +0200, Hans de Goede wrote:> Hi All,
> 
> As mentioned in my RFC titled "drm/kms: control display brightness
through
> drm_connector properties":
> https://lore.kernel.org/dri-devel/0d188965-d809-81b5-74ce-7d30c49fee2d at
redhat.com/
> 
> The first step towards this is to deal with some existing technical debt
> in backlight handling on x86/ACPI boards, specifically we need to stop
> registering multiple /sys/class/backlight devs for a single display.
> 
> This series implements my RFC describing my plan for these cleanups:
> https://lore.kernel.org/dri-devel/98519ba0-7f18-201a-ea34-652f50343158 at
redhat.com/
> 
> This new version addresses the few small remarks made on version 1 (mainly
> changing patch 1/29) and more importantly this finishes the refactoring by
> else addressing all the bits from the "Other issues" section of
> the refactor RFC (resulting in patches 15-29 which are new in v2).
> 
> Please review and test! I hope to be able to make an immutable branch
> based on 5.20-rc1 + this series available for merging into the various
> touched subsystems once 5.20-rc2 is out.
> 
> Regards,
> 
> Hans
> 
> 
> Hans de Goede (29):
> ? ACPI: video: Add acpi_video_backlight_use_native() helper
> ? drm/i915: Don't register backlight when another backlight should be
> ??? used
> ? drm/amdgpu: Don't register backlight when another backlight should be
> ??? used
> ? drm/radeon: Don't register backlight when another backlight should be
> ??? used
> ? drm/nouveau: Don't register backlight when another backlight should
be
> ??? used
> ? ACPI: video: Drop backlight_device_get_by_type() call from
> ??? acpi_video_get_backlight_type()
> ? ACPI: video: Remove acpi_video_bus from list before tearing it down
> ? ACPI: video: Simplify acpi_video_unregister_backlight()
> ? ACPI: video: Make backlight class device registration a separate step
> ? ACPI: video: Remove code to unregister acpi_video backlight when a
> ??? native backlight registers
> ? drm/i915: Call acpi_video_register_backlight() (v2)
> ? drm/nouveau: Register ACPI video backlight when nv_backlight
> ??? registration fails
> ? drm/amdgpu: Register ACPI video backlight when skipping amdgpu
> ??? backlight registration
> ? drm/radeon: Register ACPI video backlight when skipping radeon
> ??? backlight registration
> ? ACPI: video: Refactor acpi_video_get_backlight_type() a bit
> ? ACPI: video: Add Nvidia WMI EC brightness control detection
> ? ACPI: video: Add Apple GMUX brightness control detection
> ? platform/x86: apple-gmux: Stop calling acpi/video.h functions
> ? platform/x86: toshiba_acpi: Stop using
> ??? acpi_video_set_dmi_backlight_type()
> ? platform/x86: acer-wmi: Move backlight DMI quirks to
> ??? acpi/video_detect.c
> ? platform/x86: asus-wmi: Drop DMI chassis-type check from backlight
> ??? handling
> ? platform/x86: asus-wmi: Move acpi_backlight=vendor quirks to ACPI
> ??? video_detect.c
> ? platform/x86: asus-wmi: Move acpi_backlight=native quirks to ACPI
> ??? video_detect.c
> ? platform/x86: samsung-laptop: Move acpi_backlight=[vendor|native]
> ??? quirks to ACPI video_detect.c
> ? ACPI: video: Remove acpi_video_set_dmi_backlight_type()
> ? ACPI: video: Drop "Samsung X360" acpi_backlight=native quirk
> ? ACPI: video: Drop Clevo/TUXEDO NL5xRU and NL5xNU acpi_backlight=native
> ??? quirks
> ? ACPI: video: Fix indentation of video_detect_dmi_table[] entries
> ? drm/todo: Add entry about dealing with brightness control on devices
> ??? with > 1 panel
> 
> ?Documentation/gpu/todo.rst??????????????????? |? 68 +++
> ?drivers/acpi/Kconfig????????????????????????? |?? 1 +
> ?drivers/acpi/acpi_video.c???????????????????? |? 59 ++-
> ?drivers/acpi/video_detect.c?????????????????? | 415 +++++++++++-------
> ?drivers/gpu/drm/Kconfig?????????????????????? |? 12 +
> ?.../gpu/drm/amd/amdgpu/atombios_encoders.c??? |? 14 +-
> ?.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |?? 9 +
> ?drivers/gpu/drm/gma500/Kconfig??????????????? |?? 2 +
> ?drivers/gpu/drm/i915/Kconfig????????????????? |?? 2 +
> ?.../gpu/drm/i915/display/intel_backlight.c??? |?? 7 +
> ?drivers/gpu/drm/i915/display/intel_display.c? |?? 8 +
> ?drivers/gpu/drm/i915/display/intel_panel.c??? |?? 3 +
> ?drivers/gpu/drm/i915/i915_drv.h?????????????? |?? 2 +
> ?drivers/gpu/drm/nouveau/nouveau_backlight.c?? |? 14 +
> ?drivers/gpu/drm/radeon/atombios_encoders.c??? |?? 7 +
> ?drivers/gpu/drm/radeon/radeon_encoders.c????? |? 11 +-
> ?.../gpu/drm/radeon/radeon_legacy_encoders.c?? |?? 7 +
> ?drivers/platform/x86/acer-wmi.c?????????????? |? 66 ---
> ?drivers/platform/x86/apple-gmux.c???????????? |?? 3 -
> ?drivers/platform/x86/asus-nb-wmi.c??????????? |? 21 -
> ?drivers/platform/x86/asus-wmi.c?????????????? |? 13 -
> ?drivers/platform/x86/asus-wmi.h?????????????? |?? 2 -
> ?drivers/platform/x86/eeepc-wmi.c????????????? |? 25 +-
> ?drivers/platform/x86/samsung-laptop.c???????? |? 87 ----
> ?drivers/platform/x86/toshiba_acpi.c?????????? |? 16 -
> ?include/acpi/video.h????????????????????????? |?? 9 +-
> ?26 files changed, 468 insertions(+), 415 deletions(-)
> 
-- 
Cheers,
 Lyude Paul (she/her)
 Software Engineer at Red Hat

Nouveau - Jul 2022 - [PATCH v2 20/29] platform/x86: acer-wmi: Move backlight DMI quirks to acpi/video_detect.c

[Nouveau] [PATCH v2 00/29] drm/kms: Stop registering multiple /sys/class/backlight devs for a single display

[Nouveau] [PATCH v2 01/29] ACPI: video: Add acpi_video_backlight_use_native() helper

[Nouveau] [PATCH v2 02/29] drm/i915: Don't register backlight when another backlight should be used

[Nouveau] [PATCH v2 03/29] drm/amdgpu: Don't register backlight when another backlight should be used

[Nouveau] [PATCH v2 04/29] drm/radeon: Don't register backlight when another backlight should be used

[Nouveau] [PATCH v2 05/29] drm/nouveau: Don't register backlight when another backlight should be used

[Nouveau] [PATCH v2 06/29] ACPI: video: Drop backlight_device_get_by_type() call from acpi_video_get_backlight_type()

[Nouveau] [PATCH v2 07/29] ACPI: video: Remove acpi_video_bus from list before tearing it down

[Nouveau] [PATCH v2 08/29] ACPI: video: Simplify acpi_video_unregister_backlight()

[Nouveau] [PATCH v2 09/29] ACPI: video: Make backlight class device registration a separate step

[Nouveau] [PATCH v2 10/29] ACPI: video: Remove code to unregister acpi_video backlight when a native backlight registers

[Nouveau] [PATCH v2 11/29] drm/i915: Call acpi_video_register_backlight() (v2)

[Nouveau] [PATCH v2 12/29] drm/nouveau: Register ACPI video backlight when nv_backlight registration fails

[Nouveau] [PATCH v2 13/29] drm/amdgpu: Register ACPI video backlight when skipping amdgpu backlight registration

[Nouveau] [PATCH v2 14/29] drm/radeon: Register ACPI video backlight when skipping radeon backlight registration

[Nouveau] [PATCH v2 15/29] ACPI: video: Refactor acpi_video_get_backlight_type() a bit

[Nouveau] [PATCH v2 16/29] ACPI: video: Add Nvidia WMI EC brightness control detection

[Nouveau] [PATCH v2 17/29] ACPI: video: Add Apple GMUX brightness control detection

[Nouveau] [PATCH v2 18/29] platform/x86: apple-gmux: Stop calling acpi/video.h functions

[Nouveau] [PATCH v2 19/29] platform/x86: toshiba_acpi: Stop using acpi_video_set_dmi_backlight_type()

[Nouveau] [PATCH v2 20/29] platform/x86: acer-wmi: Move backlight DMI quirks to acpi/video_detect.c

[Nouveau] [PATCH v2 21/29] platform/x86: asus-wmi: Drop DMI chassis-type check from backlight handling

[Nouveau] [PATCH v2 22/29] platform/x86: asus-wmi: Move acpi_backlight=vendor quirks to ACPI video_detect.c

[Nouveau] [PATCH v2 23/29] platform/x86: asus-wmi: Move acpi_backlight=native quirks to ACPI video_detect.c

[Nouveau] [PATCH v2 24/29] platform/x86: samsung-laptop: Move acpi_backlight=[vendor|native] quirks to ACPI video_detect.c

[Nouveau] [PATCH v2 25/29] ACPI: video: Remove acpi_video_set_dmi_backlight_type()

[Nouveau] [PATCH v2 26/29] ACPI: video: Drop "Samsung X360" acpi_backlight=native quirk

[Nouveau] [PATCH v2 27/29] ACPI: video: Drop Clevo/TUXEDO NL5xRU and NL5xNU acpi_backlight=native quirks

[Nouveau] [PATCH v2 28/29] ACPI: video: Fix indentation of video_detect_dmi_table[] entries

[Nouveau] [PATCH v2 29/29] drm/todo: Add entry about dealing with brightness control on devices with > 1 panel

[Nouveau] [PATCH v2 00/29] drm/kms: Stop registering multiple /sys/class/backlight devs for a single display

[Nouveau] [PATCH v2 00/29] drm/kms: Stop registering multiple /sys/class/backlight devs for a single display