Nouveau - Jun 2019 - [PATCH] drm/nouveau: Enable i2c pads & busses during preinit

It turns out that while disabling i2c bus access from software when the
GPU is suspended was a step in the right direction with:

commit 342406e4fbba ("drm/nouveau/i2c: Disable i2c bus access after
->fini()")

We also ended up accidentally breaking the vbios init scripts on some
older Tesla GPUs, as apparently said scripts can actually use the i2c
bus. Since these scripts are executed before initializing any
subdevices, we end up failing to acquire access to the i2c bus which has
left a number of cards with their fan controllers uninitialized. Luckily
this doesn't break hardware - it just means the fan gets stuck at 100%.

This also means that we've always been using our i2c busses before
initializing them during the init scripts for older GPUs, we just didn't
notice it until we started preventing them from being used until init.
It's pretty impressive this never caused us any issues before!

So, fix this by initializing our i2c pad and busses during subdev
pre-init. We skip initializing aux busses during pre-init, as those are
guaranteed to only ever be used by nouveau for DP aux transactions.

Signed-off-by: Lyude Paul <lyude at redhat.com>
Tested-by: Marc Meledandri <m.meledandri at gmail.com>
Fixes: 342406e4fbba ("drm/nouveau/i2c: Disable i2c bus access after
->fini()")
Cc: stable at vger.kernel.org
---
 .../gpu/drm/nouveau/nvkm/subdev/i2c/base.c    | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c
index ecacb22834d7..719345074711 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c
@@ -184,6 +184,25 @@ nvkm_i2c_fini(struct nvkm_subdev *subdev, bool suspend)
 	return 0;
 }
 
+static int
+nvkm_i2c_preinit(struct nvkm_subdev *subdev)
+{
+	struct nvkm_i2c *i2c = nvkm_i2c(subdev);
+	struct nvkm_i2c_bus *bus;
+	struct nvkm_i2c_pad *pad;
+
+	/*
+	 * We init our i2c busses as early as possible, since they may be
+	 * needed by the vbios init scripts on some cards
+	 */
+	list_for_each_entry(pad, &i2c->pad, head)
+		nvkm_i2c_pad_init(pad);
+	list_for_each_entry(bus, &i2c->bus, head)
+		nvkm_i2c_bus_init(bus);
+
+	return 0;
+}
+
 static int
 nvkm_i2c_init(struct nvkm_subdev *subdev)
 {
@@ -238,6 +257,7 @@ nvkm_i2c_dtor(struct nvkm_subdev *subdev)
 static const struct nvkm_subdev_func
 nvkm_i2c = {
 	.dtor = nvkm_i2c_dtor,
+	.preinit = nvkm_i2c_preinit,
 	.init = nvkm_i2c_init,
 	.fini = nvkm_i2c_fini,
 	.intr = nvkm_i2c_intr,
-- 
2.21.0