Lyude Paul
2018-Jan-25 23:29 UTC
[Nouveau] [PATCH v3] drm/nouveau: Move irq setup/teardown to pci ctor/dtor
For a while we've been having issues with seemingly random interrupts coming from nvidia cards when resuming them. Originally the fix for this was thought to be just re-arming the MSI interrupt registers right after re-allocating our IRQs, however it seems a lot of what we do is both wrong and not even nessecary. This was made apparent by what appeared to be a regression in the mainline kernel that started introducing suspend/resume issues for nouveau: a0c9259dc4e1 (irq/matrix: Spread interrupts on allocation) After this commit was introduced, we started getting interrupts from the GPU before we actually re-allocated our own IRQ (see references below) and assigned the IRQ handler. Investigating this turned out that the problem was not with the commit, but the fact that nouveau even free/allocates it's irqs before and after suspend/resume. For starters: drivers in the linux kernel haven't had to handle freeing/re-allocating their IRQs during suspend/resume cycles for quite a while now. Nouveau seems to be one of the few drivers left that still does this, despite the fact there's no reason we actually need to since disabling interrupts from the device side should be enough, as the kernel is already smart enough to know to disable host-side interrupts for us before going into suspend. Since we were tearing down our IRQs by hand however, that means there was a short period during resume where interrupts could be received before we re-allocated our IRQ which would lead to us getting an unhandled IRQ. Since we never handle said IRQ and re-arm the interrupt registers, this would cause us to miss all of the interrupts from the GPU and cause our init process to start timing out on anything requiring interrupts. So, since this whole setup/teardown every suspend/resume cycle is useless anyway, move irq setup/teardown into the pci subdev's ctor/dtor functions instead so they're only called at driver load and driver unload. This should fix most of the issues with pending interrupts on resume, along with getting suspend/resume for nouveau to work again. As well, this probably means we can also just remove the msi rearm call inside nvkm_pci_init(). But since our main focus here is to fix suspend/resume before 4.15, we'll save that for a later patch. Signed-off-by: Lyude Paul <lyude at redhat.com> Cc: Karol Herbst <kherbst at redhat.com> Cc: Thomas Gleixner <tglx at linutronix.de> Cc: Mike Galbraith <efault at gmx.de> Cc: stable at vger.kernel.org --- Changes since v2: - Remove teardown, just reuse pci->irq to indicate when we're tearing down the driver drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c | 44 +++++++++++++++++--------- 1 file changed, 29 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c index deb96de54b00..3b2cad639388 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c @@ -71,6 +71,10 @@ nvkm_pci_intr(int irq, void *arg) struct nvkm_pci *pci = arg; struct nvkm_device *device = pci->subdev.device; bool handled = false; + + if (pci->irq < 0) + return IRQ_HANDLED; + nvkm_mc_intr_unarm(device); if (pci->msi) pci->func->msi_rearm(pci); @@ -84,11 +88,6 @@ nvkm_pci_fini(struct nvkm_subdev *subdev, bool suspend) { struct nvkm_pci *pci = nvkm_pci(subdev); - if (pci->irq >= 0) { - free_irq(pci->irq, pci); - pci->irq = -1; - } - if (pci->agp.bridge) nvkm_agp_fini(pci); @@ -108,8 +107,20 @@ static int nvkm_pci_oneinit(struct nvkm_subdev *subdev) { struct nvkm_pci *pci = nvkm_pci(subdev); - if (pci_is_pcie(pci->pdev)) - return nvkm_pcie_oneinit(pci); + struct pci_dev *pdev = pci->pdev; + int ret; + + if (pci_is_pcie(pci->pdev)) { + ret = nvkm_pcie_oneinit(pci); + if (ret) + return ret; + } + + ret = request_irq(pdev->irq, nvkm_pci_intr, IRQF_SHARED, "nvkm", pci); + if (ret) + return ret; + pci->irq = pdev->irq; + return 0; } @@ -117,7 +128,6 @@ static int nvkm_pci_init(struct nvkm_subdev *subdev) { struct nvkm_pci *pci = nvkm_pci(subdev); - struct pci_dev *pdev = pci->pdev; int ret; if (pci->agp.bridge) { @@ -131,28 +141,32 @@ nvkm_pci_init(struct nvkm_subdev *subdev) if (pci->func->init) pci->func->init(pci); - ret = request_irq(pdev->irq, nvkm_pci_intr, IRQF_SHARED, "nvkm", pci); - if (ret) - return ret; - - pci->irq = pdev->irq; - /* Ensure MSI interrupts are armed, for the case where there are * already interrupts pending (for whatever reason) at load time. */ if (pci->msi) pci->func->msi_rearm(pci); - return ret; + return 0; } static void * nvkm_pci_dtor(struct nvkm_subdev *subdev) { struct nvkm_pci *pci = nvkm_pci(subdev); + int irq; + nvkm_agp_dtor(pci); + + if (pci->irq >= 0) { + irq = pci->irq; + pci->irq = -1; + free_irq(irq, pci); + } + if (pci->msi) pci_disable_msi(pci->pdev); + return nvkm_pci(subdev); } -- 2.14.3
Adam Borowski
2018-Jan-26 01:20 UTC
[Nouveau] [PATCH v3] drm/nouveau: Move irq setup/teardown to pci ctor/dtor
On Thu, Jan 25, 2018 at 06:29:53PM -0500, Lyude Paul wrote:> This was made apparent by what appeared to be a regression in the > mainline kernel that started introducing suspend/resume issues for > nouveau: > > a0c9259dc4e1 (irq/matrix: Spread interrupts on allocation)I'm just a dumb user here, but I confirm: CPU: AMD Phenom II X6 1055T, GPU: GTX 560 Ti 100% fail to resume GPU on 4.15-rc*, 100% ok with your patch. And that spinning rust hates being repeatedly powered off and on... :/> --- > Changes since v2: > - Remove teardown, just reuse pci->irq to indicate when we're tearing > down the driver > > drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c | 44 +++++++++++++++++--------- > 1 file changed, 29 insertions(+), 15 deletions(-)Meow! -- ⢀⣴⠾⠻⢶⣦⠀ ⣾⠁⢰⠒⠀⣿⡁ Imagine there are bandits in your house, your kid is bleeding out, ⢿⡄⠘⠷⠚⠋⠀ the house is on fire, and seven big-ass trumpets are playing in the ⠈⠳⣄⠀⠀⠀⠀ sky. Your cat demands food. The priority should be obvious...
Mike Galbraith
2018-Jan-26 02:36 UTC
[Nouveau] [PATCH v3] drm/nouveau: Move irq setup/teardown to pci ctor/dtor
On Fri, 2018-01-26 at 02:20 +0100, Adam Borowski wrote:> On Thu, Jan 25, 2018 at 06:29:53PM -0500, Lyude Paul wrote: > > This was made apparent by what appeared to be a regression in the > > mainline kernel that started introducing suspend/resume issues for > > nouveau: > > > > a0c9259dc4e1 (irq/matrix: Spread interrupts on allocation) > > I'm just a dumb user here, but I confirm: > CPU: AMD Phenom II X6 1055T, GPU: GTX 560 Ti > 100% fail to resume GPU on 4.15-rc*, 100% ok with your patch.Ditto.. and my GTX 980 works again. -Mike
Seemingly Similar Threads
- [PATCH] drm/nouveau: Move irq setup/teardown to pci ctor/dtor
- [PATCH v2] drm/nouveau: Move irq setup/teardown to pci ctor/dtor
- [PATCH v3] drm/nouveau: Move irq setup/teardown to pci ctor/dtor
- [PATCH 2/5] pci: enable pcie link changes for pascal
- [PATCH v2 2/4] pci: enable pcie link changes for pascal