thr3ads.net - Nouveau - [Nouveau] [PATCH] Add Option "DRI3" to allow to disable DRI3 under EXA. [Jun 2015]

If this information is useful, please help other people find it:
Share via:

Mario Kleiner

2015-Jun-30 03:30 UTC

[Nouveau] [PATCH] Add Option "DRI3" to allow to disable DRI3 under EXA.

X-Server versions older than 1.16.3 have bugs in their
DRI3/Present implementation which impair nouveau, so
it is better to stick to good old DRI2 by default on
such servers. E.g., page flipping doesn't work at all
under DRI3/Present with older servers, and use of
extensions like OML_sync_control, SGI_video_sync or
INTEL_swap_events also causes failure of Present.

nouveau's glamor accel backend currently doesn't work under
DRI2, so continue to use DRI3 whenever it is supported.

Under the exa accel backend, DRI2 works just fine, so
disable DRI3 and choose DRI2 by default when nouveau
is built for X-Server < 1.16.3, and enable DRI3 if
building on later X-Servers which work reasonably well
under DRI3/Present.

A new boolean xorg.conf Option "DRI3" allows to enforce or
prevent use of DRI3/Present under EXA acceleration for
testing.

Also add a bit more output about status of Present and
DRI3 to aid debugging.

Signed-off-by: Mario Kleiner <mario.kleiner.de at gmail.com>
---
 man/nouveau.man    |  6 ++++++
 src/nouveau_dri2.c | 11 ++++++++++-
 src/nv_const.h     |  2 ++
 src/nv_driver.c    | 17 +++++++++++++++--
 4 files changed, 33 insertions(+), 3 deletions(-)

diff --git a/man/nouveau.man b/man/nouveau.man
index 129bb7f..12cfbc0 100644
--- a/man/nouveau.man
+++ b/man/nouveau.man
@@ -125,6 +125,12 @@ that relies on correct presentation timing behaviour as
defined in that
 specification.
 .br
 Default: 1.
+.TP
+.BI "Option \*qDRI3\*q \*q" boolean \*q
+Enable the DRI3 extension under exa acceleration if supported by server.
+A setting of "off" will only use DRI2 instead. Under glamor
acceleration,
+DRI3 is always enabled if supported. Default: on for XOrg >= 1.16.3, off for
+earlier versions.
 .SH "SEE ALSO"
 __xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__),
Xserver(__appmansuffix__), X(__miscmansuffix__)
 .SH AUTHORS
diff --git a/src/nouveau_dri2.c b/src/nouveau_dri2.c
index f22e319..d818976 100644
--- a/src/nouveau_dri2.c
+++ b/src/nouveau_dri2.c
@@ -1130,7 +1130,16 @@ nouveau_dri3_screen_init(ScreenPtr screen)
 	if (buf && stat(buf, &render) == 0 &&
 	    master.st_mode == render.st_mode) {
 		pNv->render_node = buf;
-		return dri3_screen_init(screen, &nouveau_dri3_screen_info);
+		if (dri3_screen_init(screen, &nouveau_dri3_screen_info)) {
+			xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+				   "DRI3 on EXA enabled\n");
+			return TRUE;
+		}
+		else {
+			xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
+				   "DRI3 on EXA initialization failed\n");
+			return FALSE;
+		}
 	} else
 		free(buf);
 #endif
diff --git a/src/nv_const.h b/src/nv_const.h
index f1b4e9b..df1e398 100644
--- a/src/nv_const.h
+++ b/src/nv_const.h
@@ -18,6 +18,7 @@ typedef enum {
     OPTION_SWAP_LIMIT,
     OPTION_ASYNC_COPY,
     OPTION_ACCELMETHOD,
+    OPTION_DRI3,
 } NVOpts;
 
 
@@ -34,6 +35,7 @@ static const OptionInfoRec NVOptions[] = {
     { OPTION_SWAP_LIMIT,	"SwapLimit",	OPTV_INTEGER,	{0}, FALSE },
     { OPTION_ASYNC_COPY,	"AsyncUTSDFS",	OPTV_BOOLEAN,	{0}, FALSE },
     { OPTION_ACCELMETHOD,	"AccelMethod",	OPTV_STRING,	{0}, FALSE },
+    { OPTION_DRI3,		"DRI3",		OPTV_BOOLEAN,	{0}, FALSE },
     { -1,                       NULL,           OPTV_NONE,      {0}, FALSE }
 };
 
diff --git a/src/nv_driver.c b/src/nv_driver.c
index 8e2ae03..32f04d8 100644
--- a/src/nv_driver.c
+++ b/src/nv_driver.c
@@ -1470,7 +1470,13 @@ NVScreenInit(SCREEN_INIT_ARGS_DECL)
 
 	xf86SetBlackWhitePixels(pScreen);
 
-	nouveau_present_init(pScreen);
+	if (nouveau_present_init(pScreen) <= 0)
+		xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+			   "Hardware support for Present disabled\n");
+	else
+		xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+			   "Hardware support for Present enabled\n");
+
 	nouveau_sync_init(pScreen);
 	nouveau_dri2_init(pScreen);
 	if (pNv->AccelMethod == GLAMOR) {
@@ -1478,7 +1484,14 @@ NVScreenInit(SCREEN_INIT_ARGS_DECL)
 			return FALSE;
 	} else
 	if (pNv->AccelMethod == EXA) {
-		if (!nouveau_dri3_screen_init(pScreen))
+		/* Default to DRI3/Present on XOrg >= 1.16.3, DRI2 on older
+		 * servers, as older servers have DRI3/Present bugs affecting
+		 * nouveau.
+		 */
+		ret = xf86ReturnOptValBool(pNv->Options, OPTION_DRI3,
+					   XORG_VERSION_CURRENT >+					   XORG_VERSION_NUMERIC(1,16,3,0,0));
+		if (ret && !nouveau_dri3_screen_init(pScreen))
 			return FALSE;
 
 		if (!nouveau_exa_init(pScreen))
-- 
1.9.1

Martin Peres

2015-Jun-30 07:00 UTC

head link

[Nouveau] [PATCH] Add Option "DRI3" to allow to disable DRI3 under EXA.

On 30/06/2015 06:30, Mario Kleiner wrote:> X-Server versions older than 1.16.3 have bugs in their
> DRI3/Present implementation which impair nouveau, so
> it is better to stick to good old DRI2 by default on
> such servers. E.g., page flipping doesn't work at all
> under DRI3/Present with older servers, and use of
> extensions like OML_sync_control, SGI_video_sync or
> INTEL_swap_events also causes failure of Present.
>
> nouveau's glamor accel backend currently doesn't work under
> DRI2, so continue to use DRI3 whenever it is supported.
>
> Under the exa accel backend, DRI2 works just fine, so
> disable DRI3 and choose DRI2 by default when nouveau
> is built for X-Server < 1.16.3, and enable DRI3 if
> building on later X-Servers which work reasonably well
> under DRI3/Present.
>
> A new boolean xorg.conf Option "DRI3" allows to enforce or
> prevent use of DRI3/Present under EXA acceleration for
> testing.
>
> Also add a bit more output about status of Present and
> DRI3 to aid debugging.
>
> Signed-off-by: Mario Kleiner <mario.kleiner.de at gmail.com>
> ---
>   man/nouveau.man    |  6 ++++++
>   src/nouveau_dri2.c | 11 ++++++++++-
>   src/nv_const.h     |  2 ++
>   src/nv_driver.c    | 17 +++++++++++++++--
>   4 files changed, 33 insertions(+), 3 deletions(-)
>
> diff --git a/man/nouveau.man b/man/nouveau.man
> index 129bb7f..12cfbc0 100644
> --- a/man/nouveau.man
> +++ b/man/nouveau.man
> @@ -125,6 +125,12 @@ that relies on correct presentation timing behaviour
as defined in that
>   specification.
>   .br
>   Default: 1.
> +.TP
> +.BI "Option \*qDRI3\*q \*q" boolean \*q
> +Enable the DRI3 extension under exa acceleration if supported by server.
> +A setting of "off" will only use DRI2 instead. Under glamor
acceleration,
> +DRI3 is always enabled if supported. Default: on for XOrg >= 1.16.3,
off for
> +earlier versions.
>   .SH "SEE ALSO"
>   __xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__),
Xserver(__appmansuffix__), X(__miscmansuffix__)
>   .SH AUTHORS
> diff --git a/src/nouveau_dri2.c b/src/nouveau_dri2.c
> index f22e319..d818976 100644
> --- a/src/nouveau_dri2.c
> +++ b/src/nouveau_dri2.c
> @@ -1130,7 +1130,16 @@ nouveau_dri3_screen_init(ScreenPtr screen)
>   	if (buf && stat(buf, &render) == 0 &&
>   	    master.st_mode == render.st_mode) {
>   		pNv->render_node = buf;
> -		return dri3_screen_init(screen, &nouveau_dri3_screen_info);
> +		if (dri3_screen_init(screen, &nouveau_dri3_screen_info)) {
> +			xf86DrvMsg(pScrn->scrnIndex, X_INFO,
> +				   "DRI3 on EXA enabled\n");
> +			return TRUE;
> +		}
> +		else {
> +			xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
> +				   "DRI3 on EXA initialization failed\n");
> +			return FALSE;
> +		}
>   	} else
>   		free(buf);
>   #endif
> diff --git a/src/nv_const.h b/src/nv_const.h
> index f1b4e9b..df1e398 100644
> --- a/src/nv_const.h
> +++ b/src/nv_const.h
> @@ -18,6 +18,7 @@ typedef enum {
>       OPTION_SWAP_LIMIT,
>       OPTION_ASYNC_COPY,
>       OPTION_ACCELMETHOD,
> +    OPTION_DRI3,
>   } NVOpts;
>   
>   
> @@ -34,6 +35,7 @@ static const OptionInfoRec NVOptions[] = {
>       { OPTION_SWAP_LIMIT,	"SwapLimit",	OPTV_INTEGER,	{0}, FALSE
},
>       { OPTION_ASYNC_COPY,	"AsyncUTSDFS",	OPTV_BOOLEAN,	{0},
FALSE },
>       { OPTION_ACCELMETHOD,	"AccelMethod",	OPTV_STRING,	{0},
FALSE },
> +    { OPTION_DRI3,		"DRI3",		OPTV_BOOLEAN,	{0}, FALSE },
>       { -1,                       NULL,           OPTV_NONE,      {0},
FALSE }
>   };
>   
> diff --git a/src/nv_driver.c b/src/nv_driver.c
> index 8e2ae03..32f04d8 100644
> --- a/src/nv_driver.c
> +++ b/src/nv_driver.c
> @@ -1470,7 +1470,13 @@ NVScreenInit(SCREEN_INIT_ARGS_DECL)
>   
>   	xf86SetBlackWhitePixels(pScreen);
>   
> -	nouveau_present_init(pScreen);
> +	if (nouveau_present_init(pScreen) <= 0)
> +		xf86DrvMsg(pScrn->scrnIndex, X_INFO,
> +			   "Hardware support for Present disabled\n");
> +	else
> +		xf86DrvMsg(pScrn->scrnIndex, X_INFO,
> +			   "Hardware support for Present enabled\n");
> +
>   	nouveau_sync_init(pScreen);
>   	nouveau_dri2_init(pScreen);
>   	if (pNv->AccelMethod == GLAMOR) {
> @@ -1478,7 +1484,14 @@ NVScreenInit(SCREEN_INIT_ARGS_DECL)
>   			return FALSE;
>   	} else
>   	if (pNv->AccelMethod == EXA) {
> -		if (!nouveau_dri3_screen_init(pScreen))
> +		/* Default to DRI3/Present on XOrg >= 1.16.3, DRI2 on older
> +		 * servers, as older servers have DRI3/Present bugs affecting
> +		 * nouveau.
> +		 */
> +		ret = xf86ReturnOptValBool(pNv->Options, OPTION_DRI3,
> +					   XORG_VERSION_CURRENT >> +					  
XORG_VERSION_NUMERIC(1,16,3,0,0));
> +		if (ret && !nouveau_dri3_screen_init(pScreen))
>   			return FALSE;
>   
>   		if (!nouveau_exa_init(pScreen))
I like the added verbosity and indeed, dri3 is not ready yet (I started 
working on it). I trust you for which version of the xserver is started 
working better and that you actually tested your code:

Reviewed-by: Martin Peres <martin.peres at free.fr>

Ilia Mirkin

2015-Jul-04 17:17 UTC

head link

[Nouveau] [PATCH] Add Option "DRI3" to allow to disable DRI3 under EXA.

IMO it'd be nice to keep this compatible with the intel driver, which
has a "DRI" option, which can take the values 1, 2, 3. Obviously for
nouveau, 1 makes no sense as that was dropped quite some time ago.

See
http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/tree/man/intel.man#n68

On Mon, Jun 29, 2015 at 11:30 PM, Mario Kleiner
<mario.kleiner.de at gmail.com> wrote:> X-Server versions older than 1.16.3 have bugs in their
> DRI3/Present implementation which impair nouveau, so
> it is better to stick to good old DRI2 by default on
> such servers. E.g., page flipping doesn't work at all
> under DRI3/Present with older servers, and use of
> extensions like OML_sync_control, SGI_video_sync or
> INTEL_swap_events also causes failure of Present.
>
> nouveau's glamor accel backend currently doesn't work under
> DRI2, so continue to use DRI3 whenever it is supported.
>
> Under the exa accel backend, DRI2 works just fine, so
> disable DRI3 and choose DRI2 by default when nouveau
> is built for X-Server < 1.16.3, and enable DRI3 if
> building on later X-Servers which work reasonably well
> under DRI3/Present.
>
> A new boolean xorg.conf Option "DRI3" allows to enforce or
> prevent use of DRI3/Present under EXA acceleration for
> testing.
>
> Also add a bit more output about status of Present and
> DRI3 to aid debugging.
>
> Signed-off-by: Mario Kleiner <mario.kleiner.de at gmail.com>
> ---
>  man/nouveau.man    |  6 ++++++
>  src/nouveau_dri2.c | 11 ++++++++++-
>  src/nv_const.h     |  2 ++
>  src/nv_driver.c    | 17 +++++++++++++++--
>  4 files changed, 33 insertions(+), 3 deletions(-)
>
> diff --git a/man/nouveau.man b/man/nouveau.man
> index 129bb7f..12cfbc0 100644
> --- a/man/nouveau.man
> +++ b/man/nouveau.man
> @@ -125,6 +125,12 @@ that relies on correct presentation timing behaviour
as defined in that
>  specification.
>  .br
>  Default: 1.
> +.TP
> +.BI "Option \*qDRI3\*q \*q" boolean \*q
> +Enable the DRI3 extension under exa acceleration if supported by server.
> +A setting of "off" will only use DRI2 instead. Under glamor
acceleration,
> +DRI3 is always enabled if supported. Default: on for XOrg >= 1.16.3,
off for
> +earlier versions.
>  .SH "SEE ALSO"
>  __xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__),
Xserver(__appmansuffix__), X(__miscmansuffix__)
>  .SH AUTHORS
> diff --git a/src/nouveau_dri2.c b/src/nouveau_dri2.c
> index f22e319..d818976 100644
> --- a/src/nouveau_dri2.c
> +++ b/src/nouveau_dri2.c
> @@ -1130,7 +1130,16 @@ nouveau_dri3_screen_init(ScreenPtr screen)
>         if (buf && stat(buf, &render) == 0 &&
>             master.st_mode == render.st_mode) {
>                 pNv->render_node = buf;
> -               return dri3_screen_init(screen,
&nouveau_dri3_screen_info);
> +               if (dri3_screen_init(screen,
&nouveau_dri3_screen_info)) {
> +                       xf86DrvMsg(pScrn->scrnIndex, X_INFO,
> +                                  "DRI3 on EXA enabled\n");
> +                       return TRUE;
> +               }
> +               else {
> +                       xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
> +                                  "DRI3 on EXA initialization
failed\n");
> +                       return FALSE;
> +               }
>         } else
>                 free(buf);
>  #endif
> diff --git a/src/nv_const.h b/src/nv_const.h
> index f1b4e9b..df1e398 100644
> --- a/src/nv_const.h
> +++ b/src/nv_const.h
> @@ -18,6 +18,7 @@ typedef enum {
>      OPTION_SWAP_LIMIT,
>      OPTION_ASYNC_COPY,
>      OPTION_ACCELMETHOD,
> +    OPTION_DRI3,
>  } NVOpts;
>
>
> @@ -34,6 +35,7 @@ static const OptionInfoRec NVOptions[] = {
>      { OPTION_SWAP_LIMIT,       "SwapLimit",    OPTV_INTEGER,  
{0}, FALSE },
>      { OPTION_ASYNC_COPY,       "AsyncUTSDFS",  OPTV_BOOLEAN,  
{0}, FALSE },
>      { OPTION_ACCELMETHOD,      "AccelMethod",  OPTV_STRING,   
{0}, FALSE },
> +    { OPTION_DRI3,             "DRI3",         OPTV_BOOLEAN,  
{0}, FALSE },
>      { -1,                       NULL,           OPTV_NONE,      {0}, FALSE
}
>  };
>
> diff --git a/src/nv_driver.c b/src/nv_driver.c
> index 8e2ae03..32f04d8 100644
> --- a/src/nv_driver.c
> +++ b/src/nv_driver.c
> @@ -1470,7 +1470,13 @@ NVScreenInit(SCREEN_INIT_ARGS_DECL)
>
>         xf86SetBlackWhitePixels(pScreen);
>
> -       nouveau_present_init(pScreen);
> +       if (nouveau_present_init(pScreen) <= 0)
> +               xf86DrvMsg(pScrn->scrnIndex, X_INFO,
> +                          "Hardware support for Present
disabled\n");
> +       else
> +               xf86DrvMsg(pScrn->scrnIndex, X_INFO,
> +                          "Hardware support for Present
enabled\n");
> +
>         nouveau_sync_init(pScreen);
>         nouveau_dri2_init(pScreen);
>         if (pNv->AccelMethod == GLAMOR) {
> @@ -1478,7 +1484,14 @@ NVScreenInit(SCREEN_INIT_ARGS_DECL)
>                         return FALSE;
>         } else
>         if (pNv->AccelMethod == EXA) {
> -               if (!nouveau_dri3_screen_init(pScreen))
> +               /* Default to DRI3/Present on XOrg >= 1.16.3, DRI2 on
older
> +                * servers, as older servers have DRI3/Present bugs
affecting
> +                * nouveau.
> +                */
> +               ret = xf86ReturnOptValBool(pNv->Options, OPTION_DRI3,
> +                                          XORG_VERSION_CURRENT >> + 
XORG_VERSION_NUMERIC(1,16,3,0,0));
> +               if (ret && !nouveau_dri3_screen_init(pScreen))
>                         return FALSE;
>
>                 if (!nouveau_exa_init(pScreen))
> --
> 1.9.1
>
> _______________________________________________
> Nouveau mailing list
> Nouveau at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/nouveau

Emil Velikov

2015-Jul-04 18:23 UTC

head link

[Nouveau] [PATCH] Add Option "DRI3" to allow to disable DRI3 under EXA.

That would be great, as long as it does only that and does not go into
the "drivername" territory. As the said driver ;-)

"A driver name to use can be provided instead
of simple boolean value, which will be passed to the GL implementation for
it to load the appropriate backend."

-Emil

On 4 July 2015 at 18:17, Ilia Mirkin <imirkin at alum.mit.edu>
wrote:> IMO it'd be nice to keep this compatible with the intel driver, which
> has a "DRI" option, which can take the values 1, 2, 3. Obviously
for
> nouveau, 1 makes no sense as that was dropped quite some time ago.
>
> See
http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/tree/man/intel.man#n68
>
> On Mon, Jun 29, 2015 at 11:30 PM, Mario Kleiner
> <mario.kleiner.de at gmail.com> wrote:
>> X-Server versions older than 1.16.3 have bugs in their
>> DRI3/Present implementation which impair nouveau, so
>> it is better to stick to good old DRI2 by default on
>> such servers. E.g., page flipping doesn't work at all
>> under DRI3/Present with older servers, and use of
>> extensions like OML_sync_control, SGI_video_sync or
>> INTEL_swap_events also causes failure of Present.
>>
>> nouveau's glamor accel backend currently doesn't work under
>> DRI2, so continue to use DRI3 whenever it is supported.
>>
>> Under the exa accel backend, DRI2 works just fine, so
>> disable DRI3 and choose DRI2 by default when nouveau
>> is built for X-Server < 1.16.3, and enable DRI3 if
>> building on later X-Servers which work reasonably well
>> under DRI3/Present.
>>
>> A new boolean xorg.conf Option "DRI3" allows to enforce or
>> prevent use of DRI3/Present under EXA acceleration for
>> testing.
>>
>> Also add a bit more output about status of Present and
>> DRI3 to aid debugging.
>>
>> Signed-off-by: Mario Kleiner <mario.kleiner.de at gmail.com>
>> ---
>>  man/nouveau.man    |  6 ++++++
>>  src/nouveau_dri2.c | 11 ++++++++++-
>>  src/nv_const.h     |  2 ++
>>  src/nv_driver.c    | 17 +++++++++++++++--
>>  4 files changed, 33 insertions(+), 3 deletions(-)
>>
>> diff --git a/man/nouveau.man b/man/nouveau.man
>> index 129bb7f..12cfbc0 100644
>> --- a/man/nouveau.man
>> +++ b/man/nouveau.man
>> @@ -125,6 +125,12 @@ that relies on correct presentation timing
behaviour as defined in that
>>  specification.
>>  .br
>>  Default: 1.
>> +.TP
>> +.BI "Option \*qDRI3\*q \*q" boolean \*q
>> +Enable the DRI3 extension under exa acceleration if supported by
server.
>> +A setting of "off" will only use DRI2 instead. Under glamor
acceleration,
>> +DRI3 is always enabled if supported. Default: on for XOrg >=
1.16.3, off for
>> +earlier versions.
>>  .SH "SEE ALSO"
>>  __xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__),
Xserver(__appmansuffix__), X(__miscmansuffix__)
>>  .SH AUTHORS
>> diff --git a/src/nouveau_dri2.c b/src/nouveau_dri2.c
>> index f22e319..d818976 100644
>> --- a/src/nouveau_dri2.c
>> +++ b/src/nouveau_dri2.c
>> @@ -1130,7 +1130,16 @@ nouveau_dri3_screen_init(ScreenPtr screen)
>>         if (buf && stat(buf, &render) == 0 &&
>>             master.st_mode == render.st_mode) {
>>                 pNv->render_node = buf;
>> -               return dri3_screen_init(screen,
&nouveau_dri3_screen_info);
>> +               if (dri3_screen_init(screen,
&nouveau_dri3_screen_info)) {
>> +                       xf86DrvMsg(pScrn->scrnIndex, X_INFO,
>> +                                  "DRI3 on EXA enabled\n");
>> +                       return TRUE;
>> +               }
>> +               else {
>> +                       xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
>> +                                  "DRI3 on EXA initialization
failed\n");
>> +                       return FALSE;
>> +               }
>>         } else
>>                 free(buf);
>>  #endif
>> diff --git a/src/nv_const.h b/src/nv_const.h
>> index f1b4e9b..df1e398 100644
>> --- a/src/nv_const.h
>> +++ b/src/nv_const.h
>> @@ -18,6 +18,7 @@ typedef enum {
>>      OPTION_SWAP_LIMIT,
>>      OPTION_ASYNC_COPY,
>>      OPTION_ACCELMETHOD,
>> +    OPTION_DRI3,
>>  } NVOpts;
>>
>>
>> @@ -34,6 +35,7 @@ static const OptionInfoRec NVOptions[] = {
>>      { OPTION_SWAP_LIMIT,       "SwapLimit",    OPTV_INTEGER,
{0}, FALSE },
>>      { OPTION_ASYNC_COPY,       "AsyncUTSDFS",  OPTV_BOOLEAN,
{0}, FALSE },
>>      { OPTION_ACCELMETHOD,      "AccelMethod",  OPTV_STRING, 
{0}, FALSE },
>> +    { OPTION_DRI3,             "DRI3",         OPTV_BOOLEAN,
{0}, FALSE },
>>      { -1,                       NULL,           OPTV_NONE,      {0},
FALSE }
>>  };
>>
>> diff --git a/src/nv_driver.c b/src/nv_driver.c
>> index 8e2ae03..32f04d8 100644
>> --- a/src/nv_driver.c
>> +++ b/src/nv_driver.c
>> @@ -1470,7 +1470,13 @@ NVScreenInit(SCREEN_INIT_ARGS_DECL)
>>
>>         xf86SetBlackWhitePixels(pScreen);
>>
>> -       nouveau_present_init(pScreen);
>> +       if (nouveau_present_init(pScreen) <= 0)
>> +               xf86DrvMsg(pScrn->scrnIndex, X_INFO,
>> +                          "Hardware support for Present
disabled\n");
>> +       else
>> +               xf86DrvMsg(pScrn->scrnIndex, X_INFO,
>> +                          "Hardware support for Present
enabled\n");
>> +
>>         nouveau_sync_init(pScreen);
>>         nouveau_dri2_init(pScreen);
>>         if (pNv->AccelMethod == GLAMOR) {
>> @@ -1478,7 +1484,14 @@ NVScreenInit(SCREEN_INIT_ARGS_DECL)
>>                         return FALSE;
>>         } else
>>         if (pNv->AccelMethod == EXA) {
>> -               if (!nouveau_dri3_screen_init(pScreen))
>> +               /* Default to DRI3/Present on XOrg >= 1.16.3, DRI2
on older
>> +                * servers, as older servers have DRI3/Present bugs
affecting
>> +                * nouveau.
>> +                */
>> +               ret = xf86ReturnOptValBool(pNv->Options,
OPTION_DRI3,
>> +                                          XORG_VERSION_CURRENT
>>> +                                         
XORG_VERSION_NUMERIC(1,16,3,0,0));
>> +               if (ret && !nouveau_dri3_screen_init(pScreen))
>>                         return FALSE;
>>
>>                 if (!nouveau_exa_init(pScreen))
>> --
>> 1.9.1
>>
>> _______________________________________________
>> Nouveau mailing list
>> Nouveau at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/nouveau
> _______________________________________________
> Nouveau mailing list
> Nouveau at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/nouveau

Maybe Matching Threads

Search for more reasonably related threads

Nouveau - Jun 2015 - [PATCH] Add Option "DRI3" to allow to disable DRI3 under EXA.

[Nouveau] [PATCH] Add Option "DRI3" to allow to disable DRI3 under EXA.

[Nouveau] [PATCH] Add Option "DRI3" to allow to disable DRI3 under EXA.

[Nouveau] [PATCH] Add Option "DRI3" to allow to disable DRI3 under EXA.

[Nouveau] [PATCH] Add Option "DRI3" to allow to disable DRI3 under EXA.

Maybe Matching Threads