Hm, well you can see the messages about failure to set plls, which is why you don't see anything. The only odd thing I see is that you're using vesa, which can definitely mess things up. Try not using that. Also try booting with nouveau.debug=debug drm.debug=0xe which might provide more relevant info. On Jun 12, 2015 8:34 AM, "Andre Campos Rodovalho" <andre.rodovalho at gmail.com> wrote:> dmesg output: > > > --------------------------------------------------------------------------------------------------------- > > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 3.16.0-38-generic (buildd at allspice) (gcc > version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #52~14.04.1-Ubuntu SMP Fri May 8 > 09:43:57 UTC 2015 (Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10) > [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic > root=/dev/sda2 ro > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] Centaur CentaurHauls > [ 0.000000] e820: BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] > usable > [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] > usable > [ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffaffff] ACPI > data > [ 0.000000] BIOS-e820: [mem 0x00000000cffb0000-0x00000000cffdffff] ACPI > NVS > [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] > usable > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] SMBIOS 2.6 present. > [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By > O.E.M./980DE3/U3S3, BIOS P1.60 05/06/2014 > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.000000] AGP: No AGP bridge found > [ 0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-EFFFF uncachable > [ 0.000000] F0000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back > [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back > [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back > [ 0.000000] 3 disabled > [ 0.000000] 4 disabled > [ 0.000000] 5 disabled > [ 0.000000] 6 disabled > [ 0.000000] 7 disabled > [ 0.000000] TOM2: 000000022f000000 aka 8944M > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new > 0x7010600070106 > [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved > [ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000 > [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at > [ffff8800000ff780] > [ 0.000000] Scanning 1 areas for low memory corruption > [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size > 24576 > [ 0.000000] Using GB pages for direct mapping > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k > [ 0.000000] BRK [0x01fbd000, 0x01fbdfff] PGTABLE > [ 0.000000] BRK [0x01fbe000, 0x01fbefff] PGTABLE > [ 0.000000] BRK [0x01fbf000, 0x01fbffff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x22ee00000-0x22effffff] > [ 0.000000] [mem 0x22ee00000-0x22effffff] page 2M > [ 0.000000] BRK [0x01fc0000, 0x01fc0fff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22edfffff] > [ 0.000000] [mem 0x22c000000-0x22edfffff] page 2M > [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff] > [ 0.000000] [mem 0x200000000-0x22bffffff] page 2M > [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff9ffff] > [ 0.000000] [mem 0x00100000-0x001fffff] page 4k > [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M > [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G > [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M > [ 0.000000] [mem 0xcfe00000-0xcff9ffff] page 4k > [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] > [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G > [ 0.000000] RAMDISK: [mem 0x35a96000-0x36d42fff] > [ 0.000000] ACPI: Early table checksum verification disabled > [ 0.000000] ACPI: RSDP 0x00000000000FB6C0 000014 (v00 ACPIAM) > [ 0.000000] ACPI: RSDT 0x00000000CFFA0000 000040 (v01 050614 RSDT1213 > 20140506 MSFT 00000097) > [ 0.000000] ACPI: FACP 0x00000000CFFA0200 000084 (v01 A_M_I OEMFACP > 12000601 MSFT 00000097) > [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field > Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 > (20140424/tbfadt-649) > [ 0.000000] ACPI: DSDT 0x00000000CFFA0460 0088B0 (v01 AS636 AS636152 > 00000152 INTL 20051117) > [ 0.000000] ACPI: FACS 0x00000000CFFB0000 000040 > [ 0.000000] ACPI: APIC 0x00000000CFFA0390 00008C (v01 050614 APIC1213 > 20140506 MSFT 00000097) > [ 0.000000] ACPI: MCFG 0x00000000CFFA0420 00003C (v01 050614 OEMMCFG > 20140506 MSFT 00000097) > [ 0.000000] ACPI: OEMB 0x00000000CFFB0040 000072 (v01 050614 OEMB1213 > 20140506 MSFT 00000097) > [ 0.000000] ACPI: AAFT 0x00000000CFFAA460 000027 (v01 050614 OEMAAFT > 20140506 MSFT 00000097) > [ 0.000000] ACPI: HPET 0x00000000CFFAA490 000038 (v01 050614 OEMHPET > 20140506 MSFT 00000097) > [ 0.000000] ACPI: SSDT 0x00000000CFFAA4D0 001714 (v01 A M I POWERNOW > 00000001 AMD 00000001) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff] > [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22effffff] > [ 0.000000] NODE_DATA [mem 0x22eff9000-0x22effdfff] > [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> > [ffff880226600000-ffff88022e5fffff] on node 0 > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x00001000-0x00ffffff] > [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] > [ 0.000000] Normal [mem 0x100000000-0x22effffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] > [ 0.000000] node 0: [mem 0x00100000-0xcff9ffff] > [ 0.000000] node 0: [mem 0x100000000-0x22effffff] > [ 0.000000] On node 0 totalpages: 2092860 > [ 0.000000] DMA zone: 64 pages used for memmap > [ 0.000000] DMA zone: 21 pages reserved > [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 13247 pages used for memmap > [ 0.000000] DMA32 zone: 847776 pages, LIFO batch:31 > [ 0.000000] Normal zone: 19392 pages used for memmap > [ 0.000000] Normal zone: 1241088 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled) > [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 24, version 33, address 0xfec00000, GSI > 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 > [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 40 > [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] > [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000e6000-0x000fffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffaffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xcffb0000-0xcffdffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffdfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] > [ 0.000000] e820: [mem 0xd0000000-0xffdfffff] available for PCI devices > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 > nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022ec00000 s81408 > r8192 d20992 u262144 > [ 0.000000] pcpu-alloc: s81408 r8192 d20992 u262144 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 2060136 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: > BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=/dev/sda2 ro > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 > [ 0.000000] AGP: Checking aperture... > [ 0.000000] AGP: No AGP bridge found > [ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] > (32MB) > [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole > [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup > [ 0.000000] AGP: This costs you 64MB of RAM > [ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] > (65536KB) > [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] > [ 0.000000] Memory: 8072292K/8371440K available (7626K kernel code, > 1131K rwdata, 3596K rodata, 1352K init, 1300K bss, 299148K reserved) > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. > [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. > [ 0.000000] Offload RCU callbacks from all CPUs > [ 0.000000] Offload RCU callbacks from CPUs: 0-7. > [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 > [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 > [ 0.000000] spurious 8259A interrupt: IRQ7. > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] allocated 33554432 bytes of page_cgroup > [ 0.000000] please try 'cgroup_disable=memory' option if you don't want > memory cgroups > [ 0.000000] hpet clockevent registered > [ 0.000000] tsc: Fast TSC calibration using PIT > [ 0.000000] tsc: Detected 4680.606 MHz processor > [ 0.000020] Calibrating delay loop (skipped), value calculated using > timer frequency.. 9361.21 BogoMIPS (lpj=18722424) > [ 0.000024] pid_max: default: 32768 minimum: 301 > [ 0.000031] ACPI: Core revision 20140424 > [ 0.002757] ACPI: All ACPI Tables successfully acquired > [ 0.011663] Security Framework initialized > [ 0.011684] AppArmor: AppArmor initialized > [ 0.011686] Yama: becoming mindful. > [ 0.012143] Dentry cache hash table entries: 1048576 (order: 11, > 8388608 bytes) > [ 0.014204] Inode-cache hash table entries: 524288 (order: 10, 4194304 > bytes) > [ 0.015161] Mount-cache hash table entries: 16384 (order: 5, 131072 > bytes) > [ 0.015170] Mountpoint-cache hash table entries: 16384 (order: 5, > 131072 bytes) > [ 0.015394] Initializing cgroup subsys memory > [ 0.015413] Initializing cgroup subsys devices > [ 0.015419] Initializing cgroup subsys freezer > [ 0.015422] Initializing cgroup subsys net_cls > [ 0.015426] Initializing cgroup subsys blkio > [ 0.015430] Initializing cgroup subsys perf_event > [ 0.015432] Initializing cgroup subsys net_prio > [ 0.015439] Initializing cgroup subsys hugetlb > [ 0.015456] tseg: 0000000000 > [ 0.015460] CPU: Physical Processor ID: 0 > [ 0.015462] CPU: Processor Core ID: 0 > [ 0.015464] mce: CPU supports 7 MCE banks > [ 0.015470] LVT offset 1 assigned for vector 0xf9 > [ 0.015475] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 > [ 0.015475] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 > [ 0.015475] tlb_flushall_shift: 6 > [ 0.015553] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - > ffffffff81e76000) > [ 0.016170] ftrace: allocating 29244 entries in 115 pages > [ 0.023710] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.063438] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: > 15, model: 02, stepping: 00) > [ 0.167980] Performance Events: Fam15h core perfctr, AMD PMU driver. > [ 0.167985] ... version: 0 > [ 0.167987] ... bit width: 48 > [ 0.167988] ... generic registers: 6 > [ 0.167990] ... value mask: 0000ffffffffffff > [ 0.167992] ... max period: 00007fffffffffff > [ 0.167993] ... fixed-purpose events: 0 > [ 0.167995] ... event mask: 000000000000003f > [ 0.169378] NMI watchdog: enabled on all CPUs, permanently consumes one > hw-PMU counter. > [ 0.169445] x86: Booting SMP configuration: > [ 0.169447] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 > [ 0.261441] x86: Booted up 1 node, 8 CPUs > [ 0.261446] smpboot: Total of 8 processors activated (74889.69 BogoMIPS) > [ 0.269594] devtmpfs: initialized > [ 0.272590] evm: security.selinux > [ 0.272592] evm: security.SMACK64 > [ 0.272594] evm: security.SMACK64EXEC > [ 0.272596] evm: security.SMACK64TRANSMUTE > [ 0.272597] evm: security.SMACK64MMAP > [ 0.272599] evm: security.ima > [ 0.272600] evm: security.capability > [ 0.272651] PM: Registering ACPI NVS region [mem 0xcffb0000-0xcffdffff] > (196608 bytes) > [ 0.273377] pinctrl core: initialized pinctrl subsystem > [ 0.273439] regulator-dummy: no parameters > [ 0.273472] RTC time: 23:16:50, date: 06/11/15 > [ 0.273514] NET: Registered protocol family 16 > [ 0.273639] cpuidle: using governor ladder > [ 0.273642] cpuidle: using governor menu > [ 0.273705] ACPI: bus type PCI registered > [ 0.273708] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > [ 0.273767] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem > 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.273771] PCI: not using MMCONFIG > [ 0.273773] PCI: Using configuration type 1 for base access > [ 0.273775] PCI: Using configuration type 1 for extended access > [ 0.274069] mtrr: your CPUs had inconsistent variable MTRR settings > [ 0.274071] mtrr: probably your BIOS does not setup all CPUs. > [ 0.274073] mtrr: corrected configuration. > [ 0.276493] ACPI: Added _OSI(Module Device) > [ 0.276496] ACPI: Added _OSI(Processor Device) > [ 0.276498] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.276500] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.278445] ACPI: Executed 3 blocks of module-level executable AML code > [ 0.281893] ACPI: Interpreter enabled > [ 0.281902] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State > [\_S2_] (20140424/hwxface-580) > [ 0.281918] ACPI: (supports S0 S1 S3 S4 S5) > [ 0.281920] ACPI: Using IOAPIC for interrupt routing > [ 0.281975] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem > 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.282810] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in > ACPI motherboard resources > [ 0.283069] PCI: Using host bridge windows from ACPI; if necessary, use > "pci=nocrs" and report a bug > [ 0.288165] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 0.288171] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM > ClockPM Segments MSI] > [ 0.288365] acpi PNP0A03:00: _OSC: platform does not support > [PCIeHotplug PME] > [ 0.288550] acpi PNP0A03:00: _OSC: OS now controls [AER PCIeCapability] > [ 0.288835] PCI host bridge to bus 0000:00 > [ 0.288838] pci_bus 0000:00: root bus resource [bus 00-ff] > [ 0.288840] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] > [ 0.288843] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] > [ 0.288846] pci_bus 0000:00: root bus resource [mem > 0x000a0000-0x000bffff] > [ 0.288848] pci_bus 0000:00: root bus resource [mem > 0x000d0000-0x000dffff] > [ 0.288851] pci_bus 0000:00: root bus resource [mem > 0xd0000000-0xdfffffff] > [ 0.288853] pci_bus 0000:00: root bus resource [mem > 0xf0000000-0xfebfffff] > [ 0.288863] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 > [ 0.288955] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 > [ 0.288988] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold > [ 0.289023] pci 0000:00:02.0: System wakeup disabled by ACPI > [ 0.289059] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 > [ 0.289090] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold > [ 0.289127] pci 0000:00:06.0: System wakeup disabled by ACPI > [ 0.289159] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400 > [ 0.289190] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold > [ 0.289224] pci 0000:00:07.0: System wakeup disabled by ACPI > [ 0.289257] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400 > [ 0.289288] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold > [ 0.289322] pci 0000:00:09.0: System wakeup disabled by ACPI > [ 0.289353] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400 > [ 0.289383] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold > [ 0.289417] pci 0000:00:0a.0: System wakeup disabled by ACPI > [ 0.289463] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 > [ 0.289482] pci 0000:00:11.0: reg 0x10: [io 0x9000-0x9007] > [ 0.289491] pci 0000:00:11.0: reg 0x14: [io 0x8000-0x8003] > [ 0.289499] pci 0000:00:11.0: reg 0x18: [io 0x7000-0x7007] > [ 0.289508] pci 0000:00:11.0: reg 0x1c: [io 0x6000-0x6003] > [ 0.289516] pci 0000:00:11.0: reg 0x20: [io 0x5000-0x500f] > [ 0.289525] pci 0000:00:11.0: reg 0x24: [mem 0xf9fffc00-0xf9ffffff] > [ 0.289622] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 > [ 0.289635] pci 0000:00:12.0: reg 0x10: [mem 0xf9ffe000-0xf9ffefff] > [ 0.289715] pci 0000:00:12.0: System wakeup disabled by ACPI > [ 0.289748] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 > [ 0.289760] pci 0000:00:12.1: reg 0x10: [mem 0xf9ffd000-0xf9ffdfff] > [ 0.289841] pci 0000:00:12.1: System wakeup disabled by ACPI > [ 0.289879] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 > [ 0.289896] pci 0000:00:12.2: reg 0x10: [mem 0xf9fff800-0xf9fff8ff] > [ 0.289973] pci 0000:00:12.2: supports D1 D2 > [ 0.289974] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot > [ 0.290012] pci 0000:00:12.2: System wakeup disabled by ACPI > [ 0.290050] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 > [ 0.290062] pci 0000:00:13.0: reg 0x10: [mem 0xf9ffc000-0xf9ffcfff] > [ 0.290143] pci 0000:00:13.0: System wakeup disabled by ACPI > [ 0.290175] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 > [ 0.290187] pci 0000:00:13.1: reg 0x10: [mem 0xf9ffb000-0xf9ffbfff] > [ 0.290269] pci 0000:00:13.1: System wakeup disabled by ACPI > [ 0.290306] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 > [ 0.290324] pci 0000:00:13.2: reg 0x10: [mem 0xf9fff400-0xf9fff4ff] > [ 0.290400] pci 0000:00:13.2: supports D1 D2 > [ 0.290401] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot > [ 0.290440] pci 0000:00:13.2: System wakeup disabled by ACPI > [ 0.290481] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 > [ 0.290619] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a > [ 0.290634] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] > [ 0.290642] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] > [ 0.290650] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] > [ 0.290658] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] > [ 0.290667] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f] > [ 0.290685] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io > 0x01f0-0x01f7] > [ 0.290688] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] > [ 0.290690] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io > 0x0170-0x0177] > [ 0.290692] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] > [ 0.290775] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 > [ 0.290795] pci 0000:00:14.2: reg 0x10: [mem 0xf9ff4000-0xf9ff7fff > 64bit] > [ 0.290856] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold > [ 0.290891] pci 0000:00:14.2: System wakeup disabled by ACPI > [ 0.290924] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 > [ 0.291040] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 > [ 0.291100] pci 0000:00:14.4: System wakeup disabled by ACPI > [ 0.291132] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 > [ 0.291144] pci 0000:00:14.5: reg 0x10: [mem 0xf9ffa000-0xf9ffafff] > [ 0.291226] pci 0000:00:14.5: System wakeup disabled by ACPI > [ 0.291261] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 > [ 0.291323] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 > [ 0.291378] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 > [ 0.291435] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 > [ 0.291495] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 > [ 0.291550] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 > [ 0.291651] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000 > [ 0.291661] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] > [ 0.291671] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff > 64bit pref] > [ 0.291680] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff > 64bit] > [ 0.291686] pci 0000:01:00.0: reg 0x24: [io 0xa800-0xa87f] > [ 0.291692] pci 0000:01:00.0: reg 0x30: [mem 0xfe8e0000-0xfe8fffff pref] > [ 0.296100] pci 0000:00:02.0: PCI bridge to [bus 01] > [ 0.296105] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] > [ 0.296107] pci 0000:00:02.0: bridge window [mem > 0xfa000000-0xfe8fffff] > [ 0.296109] pci 0000:00:02.0: bridge window [mem > 0xd0000000-0xdfffffff 64bit pref] > [ 0.296156] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 > [ 0.296170] pci 0000:02:00.0: reg 0x10: [io 0xb800-0xb8ff] > [ 0.296189] pci 0000:02:00.0: reg 0x18: [mem 0xfe9ff000-0xfe9fffff > 64bit] > [ 0.296201] pci 0000:02:00.0: reg 0x20: [mem 0xf8efc000-0xf8efffff > 64bit pref] > [ 0.296263] pci 0000:02:00.0: supports D1 D2 > [ 0.296264] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.304108] pci 0000:00:06.0: PCI bridge to [bus 02] > [ 0.304112] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] > [ 0.304114] pci 0000:00:06.0: bridge window [mem > 0xfe900000-0xfe9fffff] > [ 0.304117] pci 0000:00:06.0: bridge window [mem > 0xf8e00000-0xf8efffff 64bit pref] > [ 0.304162] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601 > [ 0.304174] pci 0000:03:00.0: reg 0x10: [io 0xd800-0xd807] > [ 0.304181] pci 0000:03:00.0: reg 0x14: [io 0xd400-0xd403] > [ 0.304188] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd007] > [ 0.304195] pci 0000:03:00.0: reg 0x1c: [io 0xc800-0xc803] > [ 0.304202] pci 0000:03:00.0: reg 0x20: [io 0xc400-0xc41f] > [ 0.304209] pci 0000:03:00.0: reg 0x24: [mem 0xfeaffc00-0xfeaffdff] > [ 0.312113] pci 0000:00:07.0: PCI bridge to [bus 03] > [ 0.312118] pci 0000:00:07.0: bridge window [io 0xc000-0xdfff] > [ 0.312119] pci 0000:00:07.0: bridge window [mem > 0xfea00000-0xfeafffff] > [ 0.312166] pci 0000:04:00.0: [1b6f:7052] type 00 class 0x0c0330 > [ 0.312184] pci 0000:04:00.0: reg 0x10: [mem 0xfebf8000-0xfebfffff > 64bit] > [ 0.312263] pci 0000:04:00.0: supports D1 D2 > [ 0.312265] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.320122] pci 0000:00:09.0: PCI bridge to [bus 04] > [ 0.320128] pci 0000:00:09.0: bridge window [mem > 0xfeb00000-0xfebfffff] > [ 0.320173] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 > [ 0.320187] pci 0000:05:00.0: reg 0x10: [io 0xe800-0xe8ff] > [ 0.320206] pci 0000:05:00.0: reg 0x18: [mem 0xf8fff000-0xf8ffffff > 64bit pref] > [ 0.320218] pci 0000:05:00.0: reg 0x20: [mem 0xf8ff8000-0xf8ffbfff > 64bit pref] > [ 0.320279] pci 0000:05:00.0: supports D1 D2 > [ 0.320280] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.328130] pci 0000:00:0a.0: PCI bridge to [bus 05] > [ 0.328134] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] > [ 0.328138] pci 0000:00:0a.0: bridge window [mem > 0xf8f00000-0xf8ffffff 64bit pref] > [ 0.328209] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive > decode) > [ 0.328219] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] > (subtractive decode) > [ 0.328220] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] > (subtractive decode) > [ 0.328221] pci 0000:00:14.4: bridge window [mem > 0x000a0000-0x000bffff] (subtractive decode) > [ 0.328223] pci 0000:00:14.4: bridge window [mem > 0x000d0000-0x000dffff] (subtractive decode) > [ 0.328224] pci 0000:00:14.4: bridge window [mem > 0xd0000000-0xdfffffff] (subtractive decode) > [ 0.328225] pci 0000:00:14.4: bridge window [mem > 0xf0000000-0xfebfffff] (subtractive decode) > [ 0.328246] pci_bus 0000:00: on NUMA node 0 > [ 0.328858] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) > *0, disabled. > [ 0.328900] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) > *0, disabled. > [ 0.328942] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 12 14 15) *0, > disabled. > [ 0.328981] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) > *0, disabled. > [ 0.329021] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 12 14 15) *0, > disabled. > [ 0.329061] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 12 14 15) *0, > disabled. > [ 0.329101] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 12 14 15) *0, > disabled. > [ 0.329143] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) > *0, disabled. > [ 0.329200] ACPI: Enabled 1 GPEs in block 00 to 1F > [ 0.329282] vgaarb: setting as boot device: PCI:0000:01:00.0 > [ 0.329285] vgaarb: device added: > PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.329288] vgaarb: loaded > [ 0.329290] vgaarb: bridge control possible 0000:01:00.0 > [ 0.329498] SCSI subsystem initialized > [ 0.329545] libata version 3.00 loaded. > [ 0.329567] ACPI: bus type USB registered > [ 0.329583] usbcore: registered new interface driver usbfs > [ 0.329592] usbcore: registered new interface driver hub > [ 0.329612] usbcore: registered new device driver usb > [ 0.329737] PCI: Using ACPI for IRQ routing > [ 0.337703] PCI: pci_cache_line_size set to 64 bytes > [ 0.337758] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] > [ 0.337759] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff] > [ 0.337760] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff] > [ 0.337848] NetLabel: Initializing > [ 0.337849] NetLabel: domain hash size = 128 > [ 0.337851] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.337861] NetLabel: unlabeled traffic allowed by default > [ 0.337907] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 > [ 0.337912] hpet0: 4 comparators, 32-bit 14.318180 MHz counter > [ 0.339983] Switched to clocksource hpet > [ 0.345803] AppArmor: AppArmor Filesystem Enabled > [ 0.345823] pnp: PnP ACPI init > [ 0.345835] ACPI: bus type PNP registered > [ 0.345949] system 00:00: Plug and Play ACPI device, IDs PNP0c02 > (active) > [ 0.345997] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.346391] system 00:02: [mem 0xfec00000-0xfec00fff] could not be > reserved > [ 0.346394] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved > [ 0.346397] system 00:02: Plug and Play ACPI device, IDs PNP0c02 > (active) > [ 0.346596] system 00:03: [io 0x04d0-0x04d1] has been reserved > [ 0.346599] system 00:03: [io 0x040b] has been reserved > [ 0.346602] system 00:03: [io 0x04d6] has been reserved > [ 0.346605] system 00:03: [io 0x0c00-0x0c01] has been reserved > [ 0.346607] system 00:03: [io 0x0c14] has been reserved > [ 0.346610] system 00:03: [io 0x0c50-0x0c51] has been reserved > [ 0.346613] system 00:03: [io 0x0c52] has been reserved > [ 0.346615] system 00:03: [io 0x0c6c] has been reserved > [ 0.346618] system 00:03: [io 0x0c6f] has been reserved > [ 0.346620] system 00:03: [io 0x0cd0-0x0cd1] has been reserved > [ 0.346623] system 00:03: [io 0x0cd2-0x0cd3] has been reserved > [ 0.346626] system 00:03: [io 0x0cd4-0x0cd5] has been reserved > [ 0.346628] system 00:03: [io 0x0cd6-0x0cd7] has been reserved > [ 0.346631] system 00:03: [io 0x0cd8-0x0cdf] has been reserved > [ 0.346634] system 00:03: [io 0x0800-0x089f] could not be reserved > [ 0.346636] system 00:03: [io 0x0b00-0x0b0f] has been reserved > [ 0.346639] system 00:03: [io 0x0b20-0x0b3f] has been reserved > [ 0.346642] system 00:03: [io 0x0900-0x090f] has been reserved > [ 0.346644] system 00:03: [io 0x0910-0x091f] has been reserved > [ 0.346647] system 00:03: [io 0xfe00-0xfefe] has been reserved > [ 0.346650] system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved > [ 0.346653] system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved > [ 0.346656] system 00:03: Plug and Play ACPI device, IDs PNP0c02 > (active) > [ 0.346855] pnp 00:04: [dma 0 disabled] > [ 0.346903] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) > [ 0.346983] system 00:05: [io 0x0290-0x029f] has been reserved > [ 0.346986] system 00:05: Plug and Play ACPI device, IDs PNP0c02 > (active) > [ 0.347038] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved > [ 0.347041] system 00:06: Plug and Play ACPI device, IDs PNP0c02 > (active) > [ 0.347225] system 00:07: [mem 0x00000000-0x0009ffff] could not be > reserved > [ 0.347228] system 00:07: [mem 0x000e0000-0x000fffff] could not be > reserved > [ 0.347231] system 00:07: [mem 0x00100000-0xcfffffff] could not be > reserved > [ 0.347234] system 00:07: [mem 0xfec00000-0xffffffff] could not be > reserved > [ 0.347237] system 00:07: Plug and Play ACPI device, IDs PNP0c01 > (active) > [ 0.347320] pnp: PnP ACPI: found 8 devices > [ 0.347322] ACPI: bus type PNP unregistered > [ 0.353807] pci 0000:00:02.0: PCI bridge to [bus 01] > [ 0.353810] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] > [ 0.353814] pci 0000:00:02.0: bridge window [mem > 0xfa000000-0xfe8fffff] > [ 0.353817] pci 0000:00:02.0: bridge window [mem > 0xd0000000-0xdfffffff 64bit pref] > [ 0.353822] pci 0000:00:06.0: PCI bridge to [bus 02] > [ 0.353824] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] > [ 0.353828] pci 0000:00:06.0: bridge window [mem > 0xfe900000-0xfe9fffff] > [ 0.353831] pci 0000:00:06.0: bridge window [mem > 0xf8e00000-0xf8efffff 64bit pref] > [ 0.353835] pci 0000:00:07.0: PCI bridge to [bus 03] > [ 0.353838] pci 0000:00:07.0: bridge window [io 0xc000-0xdfff] > [ 0.353841] pci 0000:00:07.0: bridge window [mem > 0xfea00000-0xfeafffff] > [ 0.353846] pci 0000:00:09.0: PCI bridge to [bus 04] > [ 0.353849] pci 0000:00:09.0: bridge window [mem > 0xfeb00000-0xfebfffff] > [ 0.353853] pci 0000:00:0a.0: PCI bridge to [bus 05] > [ 0.353856] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] > [ 0.353860] pci 0000:00:0a.0: bridge window [mem > 0xf8f00000-0xf8ffffff 64bit pref] > [ 0.353864] pci 0000:00:14.4: PCI bridge to [bus 06] > [ 0.353876] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > [ 0.353877] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > [ 0.353878] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.353880] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] > [ 0.353881] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff] > [ 0.353882] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] > [ 0.353883] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] > [ 0.353885] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff] > [ 0.353886] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff > 64bit pref] > [ 0.353887] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] > [ 0.353888] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] > [ 0.353889] pci_bus 0000:02: resource 2 [mem 0xf8e00000-0xf8efffff > 64bit pref] > [ 0.353891] pci_bus 0000:03: resource 0 [io 0xc000-0xdfff] > [ 0.353892] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] > [ 0.353893] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff] > [ 0.353894] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] > [ 0.353896] pci_bus 0000:05: resource 2 [mem 0xf8f00000-0xf8ffffff > 64bit pref] > [ 0.353897] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7] > [ 0.353898] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff] > [ 0.353899] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.353900] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff] > [ 0.353902] pci_bus 0000:06: resource 8 [mem 0xd0000000-0xdfffffff] > [ 0.353903] pci_bus 0000:06: resource 9 [mem 0xf0000000-0xfebfffff] > [ 0.353923] NET: Registered protocol family 2 > [ 0.354110] TCP established hash table entries: 65536 (order: 7, 524288 > bytes) > [ 0.354288] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 0.354512] TCP: Hash tables configured (established 65536 bind 65536) > [ 0.354544] TCP: reno registered > [ 0.354554] UDP hash table entries: 4096 (order: 5, 131072 bytes) > [ 0.354595] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) > [ 0.354661] NET: Registered protocol family 1 > [ 0.800566] pci 0000:01:00.0: Video device with shadowed ROM > [ 0.800712] PCI: CLS 64 bytes, default 64 > [ 0.800769] Trying to unpack rootfs image as initramfs... > [ 1.010395] Freeing initrd memory: 19124K (ffff880035a96000 - > ffff880036d43000) > [ 1.010691] PCI-DMA: Disabling AGP. > [ 1.010769] PCI-DMA: aperture base @ c4000000 size 65536 KB > [ 1.010771] PCI-DMA: using GART IOMMU. > [ 1.010774] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture > [ 1.014431] perf: AMD NB counters detected > [ 1.014496] microcode: CPU0: patch_level=0x06000817 > [ 1.014503] microcode: CPU1: patch_level=0x06000817 > [ 1.014513] microcode: CPU2: patch_level=0x06000817 > [ 1.014523] microcode: CPU3: patch_level=0x06000817 > [ 1.014533] microcode: CPU4: patch_level=0x06000817 > [ 1.014544] microcode: CPU5: patch_level=0x06000817 > [ 1.014553] microcode: CPU6: patch_level=0x06000817 > [ 1.014564] microcode: CPU7: patch_level=0x06000817 > [ 1.014613] microcode: Microcode Update Driver: v2.00 < > tigran at aivazian.fsnet.co.uk>, Peter Oruba > [ 1.014619] LVT offset 0 assigned for vector 0x400 > [ 1.014639] perf: AMD IBS detected (0x000000ff) > [ 1.014657] Scanning for low memory corruption every 60 seconds > [ 1.014968] futex hash table entries: 2048 (order: 5, 131072 bytes) > [ 1.014992] Initialise system trusted keyring > [ 1.015010] audit: initializing netlink subsys (disabled) > [ 1.015024] audit: type=2000 audit(1434064609.896:1): initialized > [ 1.015292] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 1.016720] zpool: loaded > [ 1.016723] zbud: loaded > [ 1.016845] VFS: Disk quotas dquot_6.5.2 > [ 1.016876] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 1.017318] fuse init (API version 7.23) > [ 1.017394] msgmni has been set to 15932 > [ 1.017442] Key type big_key registered > [ 1.017828] Key type asymmetric registered > [ 1.017831] Asymmetric key parser 'x509' registered > [ 1.017862] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 252) > [ 1.017915] io scheduler noop registered > [ 1.017918] io scheduler deadline registered (default) > [ 1.017960] io scheduler cfq registered > [ 1.018161] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X > [ 1.018295] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X > [ 1.018422] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X > [ 1.018463] pcieport 0000:00:09.0: irq 43 for MSI/MSI-X > [ 1.018590] pcieport 0000:00:0a.0: irq 44 for MSI/MSI-X > [ 1.018646] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 1.018661] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 1.018704] vesafb: mode is 640x480x32, linelength=2560, pages=0 > [ 1.018706] vesafb: scrolling: redraw > [ 1.018708] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 > [ 1.026887] vesafb: framebuffer at 0xfb000000, mapped to > 0xffffc90010e80000, using 1216k, total 1216k > [ 1.027623] Console: switching to colour frame buffer device 80x30 > [ 1.028274] fb0: VESA VGA frame buffer device > [ 1.028370] input: Power Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 > [ 1.028398] ACPI: Power Button [PWRB] > [ 1.028444] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [ 1.029305] ACPI: Power Button [PWRF] > [ 1.029779] ACPI: acpi_idle registered with cpuidle > [ 1.030211] GHES: HEST is not enabled! > [ 1.030719] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled > [ 1.051604] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is > a 16550A > [ 1.054011] Linux agpgart interface v0.103 > [ 1.055645] brd: module loaded > [ 1.056690] loop: module loaded > [ 1.057325] libphy: Fixed MDIO Bus: probed > [ 1.057761] tun: Universal TUN/TAP device driver, 1.6 > [ 1.058190] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com> > [ 1.058676] PPP generic driver version 2.4.2 > [ 1.059153] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 1.059606] ehci-pci: EHCI PCI platform driver > [ 1.060181] ehci-pci 0000:00:12.2: EHCI Host Controller > [ 1.060640] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus > number 1 > [ 1.061560] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 > EHCI dummy qh workaround > [ 1.062496] ehci-pci 0000:00:12.2: debug port 1 > [ 1.062998] ehci-pci 0000:00:12.2: irq 17, io mem 0xf9fff800 > [ 1.072731] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 > [ 1.073227] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 1.073681] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.074551] usb usb1: Product: EHCI Host Controller > [ 1.074973] usb usb1: Manufacturer: Linux 3.16.0-38-generic ehci_hcd > [ 1.075404] usb usb1: SerialNumber: 0000:00:12.2 > [ 1.075971] hub 1-0:1.0: USB hub found > [ 1.076402] hub 1-0:1.0: 6 ports detected > [ 1.077091] ehci-pci 0000:00:13.2: EHCI Host Controller > [ 1.077521] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus > number 2 > [ 1.078364] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 > EHCI dummy qh workaround > [ 1.079229] ehci-pci 0000:00:13.2: debug port 1 > [ 1.079699] ehci-pci 0000:00:13.2: irq 19, io mem 0xf9fff400 > [ 1.088779] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 > [ 1.089269] usb usb2: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 1.089718] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.090598] usb usb2: Product: EHCI Host Controller > [ 1.091031] usb usb2: Manufacturer: Linux 3.16.0-38-generic ehci_hcd > [ 1.091458] usb usb2: SerialNumber: 0000:00:13.2 > [ 1.092027] hub 2-0:1.0: USB hub found > [ 1.092455] hub 2-0:1.0: 6 ports detected > [ 1.093003] ehci-platform: EHCI generic platform driver > [ 1.093427] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 1.093842] ohci-pci: OHCI PCI platform driver > [ 1.094365] ohci-pci 0000:00:12.0: OHCI PCI host controller > [ 1.094785] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus > number 3 > [ 1.095643] ohci-pci 0000:00:12.0: irq 16, io mem 0xf9ffe000 > [ 1.152862] usb usb3: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 1.153294] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.154140] usb usb3: Product: OHCI PCI host controller > [ 1.154576] usb usb3: Manufacturer: Linux 3.16.0-38-generic ohci_hcd > [ 1.155016] usb usb3: SerialNumber: 0000:00:12.0 > [ 1.155600] hub 3-0:1.0: USB hub found > [ 1.156043] hub 3-0:1.0: 3 ports detected > [ 1.156655] ohci-pci 0000:00:12.1: OHCI PCI host controller > [ 1.157090] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus > number 4 > [ 1.157929] ohci-pci 0000:00:12.1: irq 16, io mem 0xf9ffd000 > [ 1.216925] usb usb4: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 1.217364] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.218228] usb usb4: Product: OHCI PCI host controller > [ 1.218669] usb usb4: Manufacturer: Linux 3.16.0-38-generic ohci_hcd > [ 1.219105] usb usb4: SerialNumber: 0000:00:12.1 > [ 1.219692] hub 4-0:1.0: USB hub found > [ 1.220126] hub 4-0:1.0: 3 ports detected > [ 1.220728] ohci-pci 0000:00:13.0: OHCI PCI host controller > [ 1.221161] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus > number 5 > [ 1.222054] ohci-pci 0000:00:13.0: irq 18, io mem 0xf9ffc000 > [ 1.280989] usb usb5: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 1.281442] usb usb5: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.282335] usb usb5: Product: OHCI PCI host controller > [ 1.282785] usb usb5: Manufacturer: Linux 3.16.0-38-generic ohci_hcd > [ 1.283234] usb usb5: SerialNumber: 0000:00:13.0 > [ 1.283833] hub 5-0:1.0: USB hub found > [ 1.284272] hub 5-0:1.0: 3 ports detected > [ 1.284875] ohci-pci 0000:00:13.1: OHCI PCI host controller > [ 1.285305] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus > number 6 > [ 1.286172] ohci-pci 0000:00:13.1: irq 18, io mem 0xf9ffb000 > [ 1.345068] usb usb6: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 1.345522] usb usb6: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.346411] usb usb6: Product: OHCI PCI host controller > [ 1.346858] usb usb6: Manufacturer: Linux 3.16.0-38-generic ohci_hcd > [ 1.347307] usb usb6: SerialNumber: 0000:00:13.1 > [ 1.347896] hub 6-0:1.0: USB hub found > [ 1.348335] hub 6-0:1.0: 3 ports detected > [ 1.348937] ohci-pci 0000:00:14.5: OHCI PCI host controller > [ 1.349366] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus > number 7 > [ 1.350231] ohci-pci 0000:00:14.5: irq 18, io mem 0xf9ffa000 > [ 1.409109] usb usb7: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 1.409546] usb usb7: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.410403] usb usb7: Product: OHCI PCI host controller > [ 1.410846] usb usb7: Manufacturer: Linux 3.16.0-38-generic ohci_hcd > [ 1.411294] usb usb7: SerialNumber: 0000:00:14.5 > [ 1.411881] hub 7-0:1.0: USB hub found > [ 1.412320] hub 7-0:1.0: 2 ports detected > [ 1.412809] ohci-platform: OHCI generic platform driver > [ 1.413242] uhci_hcd: USB Universal Host Controller Interface driver > [ 1.413734] xhci_hcd 0000:04:00.0: xHCI Host Controller > [ 1.414166] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus > number 8 > [ 1.415118] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X > [ 1.415165] usb usb8: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 1.415619] usb usb8: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.416507] usb usb8: Product: xHCI Host Controller > [ 1.416952] usb usb8: Manufacturer: Linux 3.16.0-38-generic xhci_hcd > [ 1.417409] usb usb8: SerialNumber: 0000:04:00.0 > [ 1.417980] hub 8-0:1.0: USB hub found > [ 1.418413] hub 8-0:1.0: 4 ports detected > [ 1.418922] xhci_hcd 0000:04:00.0: xHCI Host Controller > [ 1.419346] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus > number 9 > [ 1.420224] usb usb9: New USB device found, idVendor=1d6b, > idProduct=0003 > [ 1.420676] usb usb9: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.421566] usb usb9: Product: xHCI Host Controller > [ 1.422009] usb usb9: Manufacturer: Linux 3.16.0-38-generic xhci_hcd > [ 1.422453] usb usb9: SerialNumber: 0000:04:00.0 > [ 1.423014] hub 9-0:1.0: USB hub found > [ 1.423450] hub 9-0:1.0: 4 ports detected > [ 1.423994] i8042: PNP: No PS/2 controller found. Probing ports > directly. > [ 1.426976] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 1.427395] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 1.427950] mousedev: PS/2 mouse device common for all mice > [ 1.428542] rtc_cmos 00:01: RTC can wake from S4 > [ 1.429140] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 > [ 1.429594] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes > nvram, hpet irqs > [ 1.430501] device-mapper: uevent: version 1.0.3 > [ 1.431015] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) > initialised: dm-devel at redhat.com > [ 1.431876] ledtrig-cpu: registered to indicate activity on CPUs > [ 1.432385] TCP: cubic registered > [ 1.432912] NET: Registered protocol family 10 > [ 1.433562] NET: Registered protocol family 17 > [ 1.433981] Key type dns_resolver registered > [ 1.435067] Loading compiled-in X.509 certificates > [ 1.436122] Loaded X.509 cert 'Magrathea: Glacier signing key: > c284edaccf0b473652c34d23bec356944236e63b' > [ 1.436985] registered taskstats version 1 > [ 1.439184] Key type trusted registered > [ 1.442721] Key type encrypted registered > [ 1.443116] AppArmor: AppArmor sha1 policy hashing enabled > [ 1.443514] ima: No TPM chip found, activating TPM-bypass! > [ 1.443921] evm: HMAC attrs: 0x1 > [ 1.444727] Magic number: 3:985:301 > [ 1.445140] tty tty30: hash matches > [ 1.445619] rtc_cmos 00:01: setting system clock to 2015-06-11 23:16:51 > UTC (1434064611) > [ 1.446702] acpi-cpufreq: overriding BIOS provided _PSD data > [ 1.447525] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > [ 1.447941] EDD information not available. > [ 1.448403] PM: Hibernation image not present or could not be loaded. > [ 1.449473] Freeing unused kernel memory: 1352K (ffffffff81d1c000 - > ffffffff81e6e000) > [ 1.450347] Write protecting the kernel read-only data: 12288k > [ 1.452474] Freeing unused kernel memory: 556K (ffff880001775000 - > ffff880001800000) > [ 1.454811] Freeing unused kernel memory: 500K (ffff880001b83000 - > ffff880001c00000) > [ 1.467097] systemd-udevd[144]: starting version 204 > [ 1.482331] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 1.482910] ahci 0000:00:11.0: version 3.0 > [ 1.483020] r8169 0000:02:00.0: irq 46 for MSI/MSI-X > [ 1.483144] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps > 0xf impl SATA mode > [ 1.483256] r8169 0000:02:00.0 eth0: RTL8168e/8111e at > 0xffffc90010e66000, e8:de:27:01:f6:19, XID 0c200000 IRQ 46 > [ 1.483257] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 > bytes, tx checksumming: ko] > [ 1.483275] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 1.483500] r8169 0000:05:00.0: irq 47 for MSI/MSI-X > [ 1.483671] r8169 0000:05:00.0 eth1: RTL8168evl/8111evl at > 0xffffc90010fb4000, d0:50:99:30:c6:76, XID 0c900800 IRQ 47 > [ 1.483672] r8169 0000:05:00.0 eth1: jumbo features [frames: 9200 > bytes, tx checksumming: ko] > [ 1.488749] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo > pmp pio slum part ccc > [ 1.490977] scsi0 : ahci > [ 1.492030] scsi1 : ahci > [ 1.494136] scsi2 : ahci > [ 1.494821] scsi3 : ahci > [ 1.495406] ata1: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port > 0xf9fffd00 irq 22 > [ 1.496404] ata2: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port > 0xf9fffd80 irq 22 > [ 1.497415] ata3: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port > 0xf9fffe00 irq 22 > [ 1.498417] ata4: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port > 0xf9fffe80 irq 22 > [ 1.499589] ahci 0000:03:00.0: irq 48 for MSI/MSI-X > [ 1.499613] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled > [ 1.500164] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps > 0x3 impl SATA mode > [ 1.501225] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp > pio slum part ccc sxs > [ 1.501229] scsi4 : pata_atiixp > [ 1.501445] scsi5 : pata_atiixp > [ 1.501573] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 > irq 14 > [ 1.501573] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 > irq 15 > [ 1.504907] scsi6 : ahci > [ 1.505613] scsi7 : ahci > [ 1.506270] ata7: SATA max UDMA/133 abar m512 at 0xfeaffc00 port > 0xfeaffd00 irq 48 > [ 1.507196] ata8: SATA max UDMA/133 abar m512 at 0xfeaffc00 port > 0xfeaffd80 irq 48 > [ 1.529416] systemd-udevd[147]: renamed network interface eth1 to p10p1 > [ 1.545433] systemd-udevd[152]: renamed network interface eth0 to p7p1 > [ 1.573331] usb 2-2: new high-speed USB device number 2 using ehci-pci > [ 1.685915] ata6.01: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.00, max UDMA/66 > [ 1.701871] ata6.01: configured for UDMA/66 > [ 1.706182] usb 2-2: New USB device found, idVendor=0ace, idProduct=1215 > [ 1.706692] usb 2-2: New USB device strings: Mfr=16, Product=32, > SerialNumber=0 > [ 1.707680] usb 2-2: Product: USB2.0 WLAN > [ 1.708165] usb 2-2: Manufacturer: ZyDAS > [ 1.817520] ata1: SATA link down (SStatus 0 SControl 300) > [ 1.818101] ata3: SATA link down (SStatus 0 SControl 300) > [ 1.818587] ata4: SATA link down (SStatus 0 SControl 300) > [ 1.819049] ata2: SATA link down (SStatus 0 SControl 300) > [ 1.821142] scsi 5:0:1:0: CD-ROM HL-DT-ST DVD-RAM GSA-H58N > 1.00 PQ: 0 ANSI: 5 > [ 1.831872] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 > cdda tray > [ 1.832776] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 1.833371] sr 5:0:1:0: Attached scsi CD-ROM sr0 > [ 1.833487] sr 5:0:1:0: Attached scsi generic sg0 type 5 > [ 1.841543] usb 4-1: new low-speed USB device number 2 using ohci-pci > [ 1.997384] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 1.998773] ata7.00: ATA-9: SSD2SC120G1SA754D117-820, N0530A, max > UDMA/133 > [ 1.999239] ata7.00: 234441648 sectors, multi 1: LBA48 NCQ (depth > 31/32), AA > [ 1.999981] ata7.00: configured for UDMA/133 > [ 2.000550] scsi 6:0:0:0: Direct-Access ATA SSD2SC120G1SA754 > 0A PQ: 0 ANSI: 5 > [ 2.001687] sd 6:0:0:0: [sda] 234441648 512-byte logical blocks: (120 > GB/111 GiB) > [ 2.001692] sd 6:0:0:0: Attached scsi generic sg1 type 0 > [ 2.003149] sd 6:0:0:0: [sda] Write Protect is off > [ 2.003554] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 2.003683] sd 6:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 2.005117] sda: sda1 sda2 sda3 > [ 2.005816] sd 6:0:0:0: [sda] Attached SCSI disk > [ 2.008240] tsc: Refined TSC clocksource calibration: 4653.112 MHz > [ 2.013385] usb 4-1: New USB device found, idVendor=04d9, idProduct=0022 > [ 2.013882] usb 4-1: New USB device strings: Mfr=0, Product=2, > SerialNumber=0 > [ 2.014284] usb 4-1: Product: USB Keyboard > [ 2.018348] hidraw: raw HID events driver (C) Jiri Kosina > [ 2.042342] usbcore: registered new interface driver usbhid > [ 2.042763] usbhid: USB HID core driver > [ 2.044476] input: USB Keyboard as > /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:04D9:0022.0001/input/input5 > [ 2.045444] hid-generic 0003:04D9:0022.0001: input,hidraw0: USB HID > v1.10 Keyboard [USB Keyboard] on usb-0000:00:12.1-1/input0 > [ 2.046435] input: USB Keyboard as > /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:0022.0002/input/input6 > [ 2.047461] hid-generic 0003:04D9:0022.0002: input,hidraw1: USB HID > v1.10 Device [USB Keyboard] on usb-0000:00:12.1-1/input1 > [ 2.303673] ata8: SATA link down (SStatus 0 SControl 300) > [ 2.920111] Switched to clocksource tsc > [ 4.382933] floppy0: no floppy controllers found > [ 7.272503] EXT4-fs (sda2): mounted filesystem with ordered data mode. > Opts: (null) > [ 7.364061] random: init urandom read with 70 bits of entropy available > [ 7.388873] init: plymouth-upstart-bridge main process (237) terminated > with status 1 > [ 7.389819] init: plymouth-upstart-bridge main process ended, respawning > [ 7.394387] init: plymouth-upstart-bridge main process (246) terminated > with status 1 > [ 7.395354] init: plymouth-upstart-bridge main process ended, respawning > [ 7.399374] init: plymouth-upstart-bridge main process (250) terminated > with status 1 > [ 7.400340] init: plymouth-upstart-bridge main process ended, respawning > [ 7.402987] init: plymouth-upstart-bridge main process (254) terminated > with status 1 > [ 7.403967] init: plymouth-upstart-bridge main process ended, respawning > [ 7.495806] Adding 2097148k swap on /dev/sda1. Priority:-1 extents:1 > across:2097148k SSFS > [ 7.499478] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro > [ 7.607450] systemd-udevd[399]: starting version 204 > [ 7.619836] EXT4-fs (sda3): mounted filesystem with ordered data mode. > Opts: (null) > [ 7.629983] lp: driver loaded but no devices found > [ 7.637946] ppdev: user-space parallel port driver > [ 7.647449] wmi: Mapper loaded > [ 7.647894] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 7.655187] [drm] Initialized drm 1.1.0 20060810 > [ 7.664060] ACPI Warning: SystemIO range > 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion > 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140424/utaddress-258) > [ 7.664067] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 7.672812] MCE: In-kernel MCE decoding enabled. > [ 7.674623] EDAC MC: Ver: 3.0.0 > [ 7.675757] checking generic (fb000000 130000) vs hw (d0000000 10000000) > [ 7.675759] checking generic (fb000000 130000) vs hw (fa000000 2000000) > [ 7.675761] fb: switching to nouveaufb from VESA VGA > [ 7.675782] Console: switching to colour dummy device 80x25 > [ 7.675981] AMD64 EDAC driver v3.4.0 > [ 7.676002] EDAC amd64: DRAM ECC disabled. > [ 7.676008] EDAC amd64: ECC disabled in the BIOS or no ECC capability, > module will not load. > [ 7.676008] Either enable ECC checking or force module loading by > setting 'ecc_enable_override'. > [ 7.676008] (Note that use of the override may cause unknown side > effects.) > [ 7.676119] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x298280a2 > [ 7.676122] nouveau [ DEVICE][0000:01:00.0] Chipset: G98 (NV98) > [ 7.676123] nouveau [ DEVICE][0000:01:00.0] Family : NV50 > [ 7.676213] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for > image... > [ 7.693108] AVX version of gcm_enc/dec engaged. > [ 7.712757] kvm: Nested Virtualization enabled > [ 7.712762] kvm: Nested Paging enabled > [ 7.733822] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid > [ 7.733823] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN > [ 7.733905] nouveau [ VBIOS][0000:01:00.0] BIT signature found > [ 7.733908] nouveau [ VBIOS][0000:01:00.0] version 70.18.36.00.00 > [ 7.754325] nouveau 0000:01:00.0: irq 49 for MSI/MSI-X > [ 7.754335] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled > [ 7.754358] nouveau [ PFB][0000:01:00.0] RAM type: DDR2 > [ 7.754360] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB > [ 7.754361] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags > [ 7.764707] sound hdaudioC0D0: autoconfig: line_outs=1 > (0x14/0x0/0x0/0x0/0x0) type:line > [ 7.764710] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > [ 7.764712] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) > [ 7.764713] sound hdaudioC0D0: mono: mono_out=0x0 > [ 7.764714] sound hdaudioC0D0: dig-out=0x1e/0x0 > [ 7.764715] sound hdaudioC0D0: inputs: > [ 7.764717] sound hdaudioC0D0: Front Mic=0x19 > [ 7.764718] sound hdaudioC0D0: Rear Mic=0x18 > [ 7.764719] sound hdaudioC0D0: Line=0x1a > [ 7.777512] input: HDA ATI SB Rear Mic as > /devices/pci0000:00/0000:00:14.2/sound/card0/input7 > [ 7.779263] input: HDA ATI SB Line as > /devices/pci0000:00/0000:00:14.2/sound/card0/input8 > [ 7.779485] input: HDA ATI SB Line Out as > /devices/pci0000:00/0000:00:14.2/sound/card0/input9 > [ 7.784065] nouveau [ PTHERM][0000:01:00.0] FAN control: none / > external > [ 7.784077] nouveau [ PTHERM][0000:01:00.0] fan management: automatic > [ 7.784079] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes > [ 7.784087] nouveau [ CLK][0000:01:00.0] 0f: core 550 MHz shader > 1375 MHz memory 266 MHz > [ 7.784121] nouveau [ CLK][0000:01:00.0] --: core 566 MHz shader > 1400 MHz memory 265 MHz > [ 7.784167] nouveau E[ PDISP][0000:01:00.0] 02:0261: func 08 lookup > failed, -2 > [ 7.784558] [TTM] Zone kernel: Available graphics memory: 4079904 kiB > [ 7.784560] [TTM] Zone dma32: Available graphics memory: 2097152 kiB > [ 7.784561] [TTM] Initializing pool allocator > [ 7.784567] [TTM] Initializing DMA pool allocator > [ 7.784584] nouveau [ DRM] VRAM: 1024 MiB > [ 7.784586] nouveau [ DRM] GART: 1048576 MiB > [ 7.784590] nouveau [ DRM] TMDS table version 2.0 > [ 7.784593] nouveau [ DRM] DCB version 4.0 > [ 7.784596] nouveau [ DRM] DCB outp 00: 02000300 00000028 > [ 7.784599] nouveau [ DRM] DCB outp 01: 01000302 00020030 > [ 7.784601] nouveau [ DRM] DCB outp 02: 04011310 00000028 > [ 7.784603] nouveau [ DRM] DCB outp 03: 02022322 00c20090 > [ 7.784605] nouveau [ DRM] DCB conn 00: 00001030 > [ 7.784608] nouveau [ DRM] DCB conn 01: 00000100 > [ 7.784610] nouveau [ DRM] DCB conn 02: 00002261 > [ 7.790697] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 7.790699] [drm] Driver supports precise vblank timestamp query. > [ 7.799009] nouveau [ DRM] MM: using M2MF for buffer copies > [ 7.811344] cfg80211: Calling CRDA to update world regulatory domain > [ 7.833323] cfg80211: World regulatory domain updated: > [ 7.833326] cfg80211: DFS Master region: unset > [ 7.833327] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp), (dfs_cac_time) > [ 7.833330] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm), (N/A) > [ 7.833331] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm), (N/A) > [ 7.833333] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 > mBi, 2000 mBm), (N/A) > [ 7.833335] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm), (N/A) > [ 7.833336] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm), (N/A) > [ 7.860841] init: failsafe main process (660) killed by TERM signal > [ 7.869101] nouveau [ DRM] allocated 1360x768 fb: 0x60000, bo > ffff8800cadfe000 > [ 7.869168] fbcon: nouveaufb (fb0) is primary device > [ 7.870010] nouveau E[ DEVINIT][0000:01:00.0] unable to compute > acceptable pll values > [ 7.870012] nouveau E[ DEVINIT][0000:01:00.0] failed pll calculation > [ 7.925743] Bluetooth: Core ver 2.19 > [ 7.925758] NET: Registered protocol family 31 > [ 7.925759] Bluetooth: HCI device and connection manager initialized > [ 7.925765] Bluetooth: HCI socket layer initialized > [ 7.925767] Bluetooth: L2CAP socket layer initialized > [ 7.925780] Bluetooth: SCO socket layer initialized > [ 7.928636] Bluetooth: RFCOMM TTY layer initialized > [ 7.928640] Bluetooth: RFCOMM socket layer initialized > [ 7.928644] Bluetooth: RFCOMM ver 1.11 > [ 7.934949] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 7.934949] Bluetooth: BNEP filters: protocol multicast > [ 7.934954] Bluetooth: BNEP socket layer initialized > [ 7.936155] usb 2-2: reset high-speed USB device number 2 using ehci-pci > [ 7.938438] init: cups main process (727) killed by HUP signal > [ 7.938443] init: cups main process ended, respawning > [ 8.070645] ieee80211 phy0: Selected rate control algorithm > 'minstrel_ht' > [ 8.070835] zd1211rw 2-2:1.0: phy0 > [ 8.070858] usbcore: registered new interface driver zd1211rw > [ 8.096090] Console: switching to colour frame buffer device 170x48 > [ 8.096656] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device > [ 8.096657] nouveau 0000:01:00.0: registered panic notifier > [ 8.108042] random: nonblocking pool is initialized > [ 8.115300] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 > on minor 0 > [ 8.286280] r8169 0000:02:00.0 p7p1: link down > [ 8.286309] IPv6: ADDRCONF(NETDEV_UP): p7p1: link is not ready > [ 8.403879] r8169 0000:05:00.0 p10p1: link down > [ 8.403918] IPv6: ADDRCONF(NETDEV_UP): p10p1: link is not ready > [ 8.443017] zd1211rw 2-2:1.0: firmware version 4725 > [ 8.462399] vboxdrv: module verification failed: signature and/or > required key missing - tainting kernel > [ 8.465366] vboxdrv: Found 8 processor cores. > [ 8.465801] vboxdrv: fAsync=0 offMin=0x529 offMax=0x3ee0 > [ 8.465893] vboxdrv: TSC mode is 'synchronous', kernel timer mode is > 'normal'. > [ 8.465894] vboxdrv: Successfully loaded version 4.3.20 (interface > 0x001a0008). > [ 8.483055] zd1211rw 2-2:1.0: zd1211b chip 0ace:1215 v4810 high > 00-02-72 AL2230_RF pa0 g--NS > [ 8.519323] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 8.519353] cfg80211: Calling CRDA for country: DE > [ 8.521334] cfg80211: Regulatory domain changed to country: DE > [ 8.521336] cfg80211: DFS Master region: unset > [ 8.521337] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp), (dfs_cac_time) > [ 8.521339] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, > 2000 mBm), (N/A) > [ 8.521340] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, > 2000 mBm), (N/A) > [ 8.521342] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, > 2000 mBm), (0 s) > [ 8.521343] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, > 2698 mBm), (0 s) > [ 8.521344] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), > (N/A, 4000 mBm), (N/A) > [ 8.671967] vboxpci: IOMMU not found (not registered) > [ 9.153486] init: plymouth-upstart-bridge main process ended, respawning > [ 9.407531] wlan0: authenticate with 5a:98:26:49:92:24 > [ 9.433096] wlan0: send auth to 5a:98:26:49:92:24 (try 1/3) > [ 9.434594] wlan0: authenticated > [ 9.436876] wlan0: associate with 5a:98:26:49:92:24 (try 1/3) > [ 9.443353] wlan0: RX AssocResp from 5a:98:26:49:92:24 (capab=0x411 > status=0 aid=2) > [ 9.443853] wlan0: associated > [ 9.443881] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 10.655128] floppy0: no floppy controllers found > > > 2015-06-11 20:52 GMT-03:00 Andre Campos Rodovalho < > andre.rodovalho at gmail.com>: > >> Hi, the boot does not fail, I belive... I can turn on and off the >> computer, I can access it throught SSH and even VNC. The computer is >> functinal, but screen is blank/black. My monitor says something like >> "invalid format" or "invalid input"... >> >> Tnx >> >> ----------------------------------------------------------------------------------------- >> >> Jun 11 20:16:58 v-caps rsyslogd: [origin software="rsyslogd" >> swVersion="7.4.4" x-pid="662" x-info="http://www.rsyslog.com"] start >> Jun 11 20:16:58 v-caps rsyslogd: rsyslogd's groupid changed to 104 >> Jun 11 20:16:58 v-caps rsyslogd: rsyslogd's userid changed to 101 >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Initializing cgroup subsys >> cpuset >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Initializing cgroup subsys >> cpu >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Initializing cgroup subsys >> cpuacct >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Linux version >> 3.16.0-38-generic (buildd at allspice) (gcc version 4.8.2 (Ubuntu >> 4.8.2-19ubuntu1) ) #52~14.04.1-Ubuntu SMP Fri May 8 09:43:57 UTC 2015 >> (Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10) >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Command line: >> BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=/dev/sda2 ro >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] KERNEL supported cpus: >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Intel GenuineIntel >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] AMD AuthenticAMD >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Centaur CentaurHauls >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] e820: BIOS-provided >> physical RAM map: >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem >> 0x0000000000000000-0x000000000009dbff] usable >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem >> 0x000000000009dc00-0x000000000009ffff] reserved >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem >> 0x00000000000e6000-0x00000000000fffff] reserved >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem >> 0x0000000000100000-0x00000000cff9ffff] usable >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem >> 0x00000000cffa0000-0x00000000cffaffff] ACPI data >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem >> 0x00000000cffb0000-0x00000000cffdffff] ACPI NVS >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem >> 0x00000000cffe0000-0x00000000cfffffff] reserved >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem >> 0x00000000ffe00000-0x00000000ffffffff] reserved >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem >> 0x0000000100000000-0x000000022effffff] usable >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] NX (Execute Disable) >> protection: active >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] SMBIOS 2.6 present. >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] DMI: To Be Filled By O.E.M. >> To Be Filled By O.E.M./980DE3/U3S3, BIOS P1.60 05/06/2014 >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] e820: update [mem >> 0x00000000-0x00000fff] usable ==> reserved >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] e820: remove [mem >> 0x000a0000-0x000fffff] usable >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] AGP: No AGP bridge found >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] e820: last_pfn = 0x22f000 >> max_arch_pfn = 0x400000000 >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] MTRR default type: >> uncachable >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] MTRR fixed ranges enabled: >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 00000-9FFFF write-back >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] A0000-EFFFF uncachable >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] F0000-FFFFF write-protect >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] MTRR variable ranges >> enabled: >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 0 base 000000000000 mask >> FFFF80000000 write-back >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 1 base 000080000000 mask >> FFFFC0000000 write-back >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 2 base 0000C0000000 mask >> FFFFF0000000 write-back >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 3 disabled >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 4 disabled >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 5 disabled >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 6 disabled >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 7 disabled >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] TOM2: 000000022f000000 aka >> 8944M >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] x86 PAT enabled: cpu 0, old >> 0x7040600070406, new 0x7010600070106 >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] e820: update [mem >> 0xd0000000-0xffffffff] usable ==> reserved >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] e820: last_pfn = 0xcffa0 >> max_arch_pfn = 0x400000000 >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] found SMP MP-table at [mem >> 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Scanning 1 areas for low >> memory corruption >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Base memory trampoline at >> [ffff880000097000] 97000 size 24576 >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Using GB pages for direct >> mapping >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] init_memory_mapping: [mem >> 0x00000000-0x000fffff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem >> 0x00000000-0x000fffff] page 4k >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BRK [0x01fbd000, >> 0x01fbdfff] PGTABLE >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BRK [0x01fbe000, >> 0x01fbefff] PGTABLE >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BRK [0x01fbf000, >> 0x01fbffff] PGTABLE >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] init_memory_mapping: [mem >> 0x22ee00000-0x22effffff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem >> 0x22ee00000-0x22effffff] page 2M >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BRK [0x01fc0000, >> 0x01fc0fff] PGTABLE >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] init_memory_mapping: [mem >> 0x22c000000-0x22edfffff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem >> 0x22c000000-0x22edfffff] page 2M >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] init_memory_mapping: [mem >> 0x200000000-0x22bffffff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem >> 0x200000000-0x22bffffff] page 2M >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] init_memory_mapping: [mem >> 0x00100000-0xcff9ffff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem >> 0x00100000-0x001fffff] page 4k >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem >> 0x00200000-0x3fffffff] page 2M >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem >> 0x40000000-0xbfffffff] page 1G >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem >> 0xc0000000-0xcfdfffff] page 2M >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem >> 0xcfe00000-0xcff9ffff] page 4k >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] init_memory_mapping: [mem >> 0x100000000-0x1ffffffff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem >> 0x100000000-0x1ffffffff] page 1G >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] RAMDISK: [mem >> 0x35a96000-0x36d42fff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: Early table checksum >> verification disabled >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: RSDP >> 0x00000000000FB6C0 000014 (v00 ACPIAM) >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: RSDT >> 0x00000000CFFA0000 000040 (v01 050614 RSDT1213 20140506 MSFT 00000097) >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: FACP >> 0x00000000CFFA0200 000084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097) >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI BIOS Warning (bug): >> Optional FADT field Pm2ControlBlock has zero address or length: >> 0x0000000000000000/0x1 (20140424/tbfadt-649) >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: DSDT >> 0x00000000CFFA0460 0088B0 (v01 AS636 AS636152 00000152 INTL 20051117) >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: FACS >> 0x00000000CFFB0000 000040 >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: APIC >> 0x00000000CFFA0390 00008C (v01 050614 APIC1213 20140506 MSFT 00000097) >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: MCFG >> 0x00000000CFFA0420 00003C (v01 050614 OEMMCFG 20140506 MSFT 00000097) >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: OEMB >> 0x00000000CFFB0040 000072 (v01 050614 OEMB1213 20140506 MSFT 00000097) >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: AAFT >> 0x00000000CFFAA460 000027 (v01 050614 OEMAAFT 20140506 MSFT 00000097) >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: HPET >> 0x00000000CFFAA490 000038 (v01 050614 OEMHPET 20140506 MSFT 00000097) >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: SSDT >> 0x00000000CFFAA4D0 001714 (v01 A M I POWERNOW 00000001 AMD 00000001) >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: Local APIC address >> 0xfee00000 >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] No NUMA configuration found >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Faking a node at [mem >> 0x0000000000000000-0x000000022effffff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Initmem setup node 0 [mem >> 0x00000000-0x22effffff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] NODE_DATA [mem >> 0x22eff9000-0x22effdfff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] >> [ffffea0000000000-ffffea0008bfffff] PMD -> >> [ffff880226600000-ffff88022e5fffff] on node 0 >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Zone ranges: >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] DMA [mem >> 0x00001000-0x00ffffff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] DMA32 [mem >> 0x01000000-0xffffffff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Normal [mem >> 0x100000000-0x22effffff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Movable zone start for each >> node >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Early memory node ranges >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] node 0: [mem >> 0x00001000-0x0009cfff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] node 0: [mem >> 0x00100000-0xcff9ffff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] node 0: [mem >> 0x100000000-0x22effffff] >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] On node 0 totalpages: >> 2092860 >> Jun 11 20:16:58 v-caps kernel: [ 0.000000] DMA zone: 64 pages used >> for memmap >> Jun 11 20:16:58 v-caps kernel >> > > _______________________________________________ > Nouveau mailing list > Nouveau at lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/nouveau > > ...-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20150612/2789c6f6/attachment-0001.html>
Andre Campos Rodovalho
2015-Jun-12 14:18 UTC
[Nouveau] Fwd: Problem with GT218 (GeForce GT210)
Hi again, I got a new dmesg log with the debug parameters, but I guess I could not isolate VESA. I blacklisted it at /etc/modprobe.d/blacklist.conf but comparing those logs I see no difference... Is it possible to isolate VESA somehow without removing it? The new logs are here, I'm posting full content because I'm not sure what information is more relevant... *http://webativo.com/uploads/files/debug_nouveau.zip <http://webativo.com/uploads/files/debug_nouveau.zip>* Cheers 2015-06-12 6:53 GMT-03:00 Ilia Mirkin <imirkin at alum.mit.edu>:> [clipped a bit so that it doesn't get held up by moderator, i've left > the relevant dmesg bits in] > > On Fri, Jun 12, 2015 at 3:47 AM, Ilia Mirkin <imirkin at alum.mit.edu> wrote: > > Hm, well you can see the messages about failure to set plls, which is why > > you don't see anything. The only odd thing I see is that you're using > vesa, > > which can definitely mess things up. Try not using that. Also try booting > > with nouveau.debug=debug drm.debug=0xe which might provide more relevant > > info. > > > > On Jun 12, 2015 8:34 AM, "Andre Campos Rodovalho" > > <andre.rodovalho at gmail.com> wrote: > >> > >> dmesg output: > >> > >> > >> > --------------------------------------------------------------------------------------------------------- > >> > >> > >> [ 1.018704] vesafb: mode is 640x480x32, linelength=2560, pages=0 > >> [ 1.018706] vesafb: scrolling: redraw > >> [ 1.018708] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 > >> [ 1.026887] vesafb: framebuffer at 0xfb000000, mapped to > >> 0xffffc90010e80000, using 1216k, total 1216k > >> [ 1.027623] Console: switching to colour frame buffer device 80x30 > >> [ 1.028274] fb0: VESA VGA frame buffer device > > [...] > > >> [ 7.675761] fb: switching to nouveaufb from VESA VGA > >> [ 7.675782] Console: switching to colour dummy device 80x25 > >> [ 7.676119] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x298280a2 > >> [ 7.676122] nouveau [ DEVICE][0000:01:00.0] Chipset: G98 (NV98) > >> [ 7.676123] nouveau [ DEVICE][0000:01:00.0] Family : NV50 > >> [ 7.676213] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for > >> image... > >> [ 7.733822] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid > >> [ 7.733823] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN > >> [ 7.733905] nouveau [ VBIOS][0000:01:00.0] BIT signature found > >> [ 7.733908] nouveau [ VBIOS][0000:01:00.0] version 70.18.36.00.00 > >> [ 7.754325] nouveau 0000:01:00.0: irq 49 for MSI/MSI-X > >> [ 7.754335] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled > >> [ 7.754358] nouveau [ PFB][0000:01:00.0] RAM type: DDR2 > >> [ 7.754360] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB > >> [ 7.754361] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags > >> [ 7.784065] nouveau [ PTHERM][0000:01:00.0] FAN control: none / > >> external > >> [ 7.784077] nouveau [ PTHERM][0000:01:00.0] fan management: > automatic > >> [ 7.784079] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes > >> [ 7.784087] nouveau [ CLK][0000:01:00.0] 0f: core 550 MHz shader > >> 1375 MHz memory 266 MHz > >> [ 7.784121] nouveau [ CLK][0000:01:00.0] --: core 566 MHz shader > >> 1400 MHz memory 265 MHz > >> [ 7.784167] nouveau E[ PDISP][0000:01:00.0] 02:0261: func 08 lookup > >> failed, -2 > >> [ 7.784558] [TTM] Zone kernel: Available graphics memory: 4079904 > kiB > >> [ 7.784560] [TTM] Zone dma32: Available graphics memory: 2097152 > kiB > >> [ 7.784561] [TTM] Initializing pool allocator > >> [ 7.784567] [TTM] Initializing DMA pool allocator > >> [ 7.784584] nouveau [ DRM] VRAM: 1024 MiB > >> [ 7.784586] nouveau [ DRM] GART: 1048576 MiB > >> [ 7.784590] nouveau [ DRM] TMDS table version 2.0 > >> [ 7.784593] nouveau [ DRM] DCB version 4.0 > >> [ 7.784596] nouveau [ DRM] DCB outp 00: 02000300 00000028 > >> [ 7.784599] nouveau [ DRM] DCB outp 01: 01000302 00020030 > >> [ 7.784601] nouveau [ DRM] DCB outp 02: 04011310 00000028 > >> [ 7.784603] nouveau [ DRM] DCB outp 03: 02022322 00c20090 > >> [ 7.784605] nouveau [ DRM] DCB conn 00: 00001030 > >> [ 7.784608] nouveau [ DRM] DCB conn 01: 00000100 > >> [ 7.784610] nouveau [ DRM] DCB conn 02: 00002261 > >> [ 7.790697] [drm] Supports vblank timestamp caching Rev 2 > (21.10.2013). > >> [ 7.790699] [drm] Driver supports precise vblank timestamp query. > >> [ 7.799009] nouveau [ DRM] MM: using M2MF for buffer copies > >> [ 7.869101] nouveau [ DRM] allocated 1360x768 fb: 0x60000, bo > >> ffff8800cadfe000 > >> [ 7.869168] fbcon: nouveaufb (fb0) is primary device > >> [ 7.870010] nouveau E[ DEVINIT][0000:01:00.0] unable to compute > >> acceptable pll values > >> [ 7.870012] nouveau E[ DEVINIT][0000:01:00.0] failed pll calculation >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20150612/3ba9472d/attachment-0001.html>