Christian König
2014-Jul-22 14:39 UTC
[Nouveau] [PATCH 09/17] drm/radeon: use common fence implementation for fences
Am 22.07.2014 16:27, schrieb Maarten Lankhorst:> op 22-07-14 16:24, Christian K?nig schreef: >>> No, you really shouldn't be doing much in the check anyway, it's meant to be a lightweight check. If you're not ready yet because of a lockup simply return not signaled yet. >> It's not only the lockup case from radeon I have in mind here. For userspace queues it might be necessary to call copy_from_user to figure out if a fence is signaled or not. >> >> Returning false all the time is probably not a good idea either. > Having userspace implement a fence sounds like an awful idea, why would you want to do that?Marketing moves in mysterious ways. Don't ask me, but that the direction it currently moves with userspace queues and IOMMU etc...> A fence could be exported to userspace, but that would only mean it can wait for it to be signaled with an interface like poll..Yeah agree totally, but the point for the fence interface is that I can't predict what's necessary to check if a fence is signaled or not on future hardware. For the currently available radeon hardware I can say that reading a value from a kernel page is pretty much all you need. But for older hardware that was reading from a register which might become very tricky if the hardware is power off or currently inside a reset cycle. Because off this I would avoid any such interface if it's not absolutely required by some use case, and currently I don't see this requirement because the functionality you want to archive could be implemented without this. Christian.> > ~Maarten >
Maarten Lankhorst
2014-Jul-22 14:47 UTC
[Nouveau] [PATCH 09/17] drm/radeon: use common fence implementation for fences
op 22-07-14 16:39, Christian K?nig schreef:> Am 22.07.2014 16:27, schrieb Maarten Lankhorst: >> op 22-07-14 16:24, Christian K?nig schreef: >>>> No, you really shouldn't be doing much in the check anyway, it's meant to be a lightweight check. If you're not ready yet because of a lockup simply return not signaled yet. >>> It's not only the lockup case from radeon I have in mind here. For userspace queues it might be necessary to call copy_from_user to figure out if a fence is signaled or not. >>> >>> Returning false all the time is probably not a good idea either. >> Having userspace implement a fence sounds like an awful idea, why would you want to do that? > > Marketing moves in mysterious ways. Don't ask me, but that the direction it currently moves with userspace queues and IOMMU etc... > >> A fence could be exported to userspace, but that would only mean it can wait for it to be signaled with an interface like poll.. > > Yeah agree totally, but the point for the fence interface is that I can't predict what's necessary to check if a fence is signaled or not on future hardware. > > For the currently available radeon hardware I can say that reading a value from a kernel page is pretty much all you need. But for older hardware that was reading from a register which might become very tricky if the hardware is power off or currently inside a reset cycle. > > Because off this I would avoid any such interface if it's not absolutely required by some use case, and currently I don't see this requirement because the functionality you want to archive could be implemented without this.Oh? I've already done that in radeon_fence, there is no way enable_signaling will fiddle with hardware registers during a reset cycle. I've also made sure that __radeon_fence_is_signaled grabs exclusive_lock in read mode before touching any hw state. Older hardware also doesn't implement optimus, so I think power off is not much of a worry for them, if you could point me at the checking done for that I could make sure that this is the case. ~Maarten
Christian König
2014-Jul-22 15:16 UTC
[Nouveau] [PATCH 09/17] drm/radeon: use common fence implementation for fences
Am 22.07.2014 16:47, schrieb Maarten Lankhorst:> op 22-07-14 16:39, Christian K?nig schreef: >> Am 22.07.2014 16:27, schrieb Maarten Lankhorst: >>> op 22-07-14 16:24, Christian K?nig schreef: >>>>> No, you really shouldn't be doing much in the check anyway, it's meant to be a lightweight check. If you're not ready yet because of a lockup simply return not signaled yet. >>>> It's not only the lockup case from radeon I have in mind here. For userspace queues it might be necessary to call copy_from_user to figure out if a fence is signaled or not. >>>> >>>> Returning false all the time is probably not a good idea either. >>> Having userspace implement a fence sounds like an awful idea, why would you want to do that? >> Marketing moves in mysterious ways. Don't ask me, but that the direction it currently moves with userspace queues and IOMMU etc... >> >>> A fence could be exported to userspace, but that would only mean it can wait for it to be signaled with an interface like poll.. >> Yeah agree totally, but the point for the fence interface is that I can't predict what's necessary to check if a fence is signaled or not on future hardware. >> >> For the currently available radeon hardware I can say that reading a value from a kernel page is pretty much all you need. But for older hardware that was reading from a register which might become very tricky if the hardware is power off or currently inside a reset cycle. >> >> Because off this I would avoid any such interface if it's not absolutely required by some use case, and currently I don't see this requirement because the functionality you want to archive could be implemented without this. > Oh? I've already done that in radeon_fence, there is no way enable_signaling will fiddle with hardware registers during a reset cycle. > I've also made sure that __radeon_fence_is_signaled grabs exclusive_lock in read mode before touching any hw state. > > Older hardware also doesn't implement optimus, so I think power off is not much of a worry for them, if you could point me at the checking done for that I could make sure that this is the case.I'm not talking about any specific radeon hardware or use case here. As far as I can see you indeed solved all driver problems with the current interface design. The question I'm raising is if the current interface design needs as complex as it is. And my answer to this is a clear *no*, so why do you want to stick with this design? I still haven't understood that. If it's just to support a further feature of direct synchronization in interrupt context between different drivers then I must clearly say that this is a NAK, cause you add complexity to the kernel that isn't necessary. Christian.> > ~Maarten >
Daniel Vetter
2014-Jul-22 15:19 UTC
[Nouveau] [PATCH 09/17] drm/radeon: use common fence implementation for fences
On Tue, Jul 22, 2014 at 4:39 PM, Christian K?nig <christian.koenig at amd.com> wrote:> Am 22.07.2014 16:27, schrieb Maarten Lankhorst: > >> op 22-07-14 16:24, Christian K?nig schreef: >>>> >>>> No, you really shouldn't be doing much in the check anyway, it's meant >>>> to be a lightweight check. If you're not ready yet because of a lockup >>>> simply return not signaled yet. >>> >>> It's not only the lockup case from radeon I have in mind here. For >>> userspace queues it might be necessary to call copy_from_user to figure out >>> if a fence is signaled or not. >>> >>> Returning false all the time is probably not a good idea either. >> >> Having userspace implement a fence sounds like an awful idea, why would >> you want to do that? > > > Marketing moves in mysterious ways. Don't ask me, but that the direction it > currently moves with userspace queues and IOMMU etc...Fence-based syncing between userspace queues submitted stuff through doorbells and anything submitted by the general simply wont work. Which is why I think the doorbell is a stupid interface since I just don't see cameras and v4l devices implementing all that complexity to get a pure userspace side sync solution. But that's a different problem really, and I guess marketing will eventually figure this one out, too. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Alex Deucher
2014-Jul-22 15:42 UTC
[Nouveau] [PATCH 09/17] drm/radeon: use common fence implementation for fences
On Tue, Jul 22, 2014 at 11:19 AM, Daniel Vetter <daniel at ffwll.ch> wrote:> On Tue, Jul 22, 2014 at 4:39 PM, Christian K?nig > <christian.koenig at amd.com> wrote: >> Am 22.07.2014 16:27, schrieb Maarten Lankhorst: >> >>> op 22-07-14 16:24, Christian K?nig schreef: >>>>> >>>>> No, you really shouldn't be doing much in the check anyway, it's meant >>>>> to be a lightweight check. If you're not ready yet because of a lockup >>>>> simply return not signaled yet. >>>> >>>> It's not only the lockup case from radeon I have in mind here. For >>>> userspace queues it might be necessary to call copy_from_user to figure out >>>> if a fence is signaled or not. >>>> >>>> Returning false all the time is probably not a good idea either. >>> >>> Having userspace implement a fence sounds like an awful idea, why would >>> you want to do that? >> >> >> Marketing moves in mysterious ways. Don't ask me, but that the direction it >> currently moves with userspace queues and IOMMU etc... > > Fence-based syncing between userspace queues submitted stuff through > doorbells and anything submitted by the general simply wont work. > Which is why I think the doorbell is a stupid interface since I just > don't see cameras and v4l devices implementing all that complexity to > get a pure userspace side sync solution. >Like it or not this is what a lot of application writers want (look at mantle and metal and similar new APIs or android synpts). Having queues and fences in userspace allows the application to structure things to best fit their own task graphs. The app can decide how to deal with dependencies and synchronization explicitly instead of blocking the queues in the kernel for everyone. Anyway, this is getting off topic. Alex
Apparently Analagous Threads
- [RFC PATCH v1 08/16] drm/radeon: use common fence implementation for fences
- [RFC PATCH v1 08/16] drm/radeon: use common fence implementation for fences
- [RFC PATCH v1 08/16] drm/radeon: use common fence implementation for fences
- [RFC PATCH v1 08/16] drm/radeon: use common fence implementation for fences
- [PATCH 09/17] drm/radeon: use common fence implementation for fences