bugzilla-daemon at freedesktop.org
2010-Feb-11 20:10 UTC
[Nouveau] [Bug 26534] New: nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534
Summary: nouveau does not fetch edid from connected monitor on
nforce1 (nv1a)
Product: xorg
Version: unspecified
Platform: x86 (IA32)
OS/Version: Linux (All)
Status: NEW
Severity: normal
Priority: medium
Component: Driver/nouveau
AssignedTo: nouveau at lists.freedesktop.org
ReportedBy: bonbons67 at internet.lu
QAContact: xorg-team at lists.x.org
Nouveau does not seem to fetch EDID from my monitor (Iiyama E431S, 1280x1024)
connected via VGA to MSI K7N420 Pro, using the onboard nforce graphics.
02:00.0 VGA compatible controller [0300]: nVidia Corporation NVCrush11
[GeForce2 MX Integrated Graphics] [10de:01a0] (rev b1)
(see bug #25619 for full lspci)
kernel version used: 2.6.33-rc7 from Linus at commit
e28cab42f384745c8a947a9ccd51e4aae52f5d51 with nouveau/for-airlied branch at
commit 13876c6e5fec94e9ea51b73ac025583dd7655345 + commit
d5f669822059651c4db1be94cbab605e1ba5a389 from nouveau/master.
Under /sys/class/drm/card0-VGA-1/ "edid" is empty and
"modes" lists only a few
modes: 1024x768 800x600 800x600 848x480 640x480
nouveau entries in kernel log:
[ 8.579720] nouveau 0000:02:00.0: PCI INT A -> Link[LNK5] -> GSI 16
(level,
high) -> IRQ 16
[ 8.584417] [drm] nouveau 0000:02:00.0: failed to evaluate _DSM: 5
[ 8.584793] [drm] nouveau 0000:02:00.0: Detected an NV10 generation card
(0x01a000b1)
[ 8.584974] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from
PROM
[ 8.584982] [drm] nouveau 0000:02:00.0: ... BIOS signature not found
[ 8.584985] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from
PRAMIN
[ 8.629799] [drm] nouveau 0000:02:00.0: ... BIOS checksum invalid
[ 8.629803] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from
PCIROM
[ 8.630444] [drm] nouveau 0000:02:00.0: ... appears to be valid
[ 8.630786] [drm] nouveau 0000:02:00.0: BMP BIOS found
[ 8.630789] [drm] nouveau 0000:02:00.0: BMP version 5.20
[ 8.630794] [drm] nouveau 0000:02:00.0: Bios version 03.1a.01.03
[ 8.630799] [drm] nouveau 0000:02:00.0: Found Display Configuration Block
version 1.4
[ 8.630804] [drm] nouveau 0000:02:00.0: No useful information in BIOS output
table; adding all possible outputs
[ 8.630809] [drm] nouveau 0000:02:00.0: Probing TV encoders on I2C bus: 1
[ 8.635669] [drm] nouveau 0000:02:00.0: No TV encoders found.
[ 8.635945] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset
0xA850
[ 8.635951] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset
0xADC5
[ 8.635958] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset
0xA851
[ 8.635964] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset
0xADC4
[ 8.635967] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset
0xA875
[ 8.635971] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 5 at offset
0xA931
[ 8.635989] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 6 at offset
0xA876
[ 8.636008] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 7 at offset
0xA8CC
[ 8.648284] [TTM] Zone kernel: Available graphics memory: 240446 kiB.
[ 8.648313] [drm] nouveau 0000:02:00.0: 32 MiB VRAM
[ 8.648390] agpgart-nvidia 0000:00:00.0: AGP 2.0 bridge
[ 8.648409] agpgart-nvidia 0000:00:00.0: putting AGP V2 device into 4x mode
[ 8.648526] nouveau 0000:02:00.0: putting AGP V2 device into 4x mode
[ 8.648531] [drm] nouveau 0000:02:00.0: 32 MiB GART (aperture)
[ 8.649055] [drm] nouveau 0000:02:00.0: Allocating FIFO number 0
[ 8.650297] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised
FIFO 0
[ 8.650324] [drm] nouveau 0000:02:00.0: Saving VGA fonts
[ 8.695505] [drm] nouveau 0000:02:00.0: Detected a VGA connector
[ 8.695781] [drm] nouveau 0000:02:00.0: Detected a DVI-D connector
[ 8.696494] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder
(output 0)
[ 8.696500] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder
(output 1)
[ 8.888732] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 8.892813] [drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x45000, bo
dc1cc200
[ 8.893104] fbcon: nouveaufb (fb0) is primary device
[ 8.904873] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on vga encoder
(output 0)
[ 8.904881] [drm] nouveau 0000:02:00.0: Output VGA-1 is running on CRTC 0
using output @
[ 8.906386] Console: switching to colour frame buffer device 128x48
[ 8.908107] fb0: nouveaufb frame buffer device
[ 8.908110] registered panic notifier
[ 8.908119] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on
minor 0
[ 635.030022] [drm] nouveau 0000:02:00.0: Setting dpms mode 1 on vga encoder
(output 0)
[ 992.927898] [drm] nouveau 0000:02:00.0: Load detected on head A
Is there anything additional I could provide to help getting the EDID reading
working?
--
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-11 22:03 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #1 from Francisco Jerez <currojerez at riseup.net> 2010-02-11 14:03:46 PST --- (In reply to comment #0)> Is there anything additional I could provide to help getting the EDID reading > working? >It would be interesting if you grabbed some logs having loaded nouveau with the "reg_debug=0x70" module parameter. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-12 22:47 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #2 from Bruno <bonbons67 at internet.lu> 2010-02-12 14:47:22 PST --- Created an attachment (id=33261) --> (http://bugs.freedesktop.org/attachment.cgi?id=33261) kernel log with reg_debug=0x70 (In reply to comment #1)> It would be interesting if you grabbed some logs having loaded nouveau with > the "reg_debug=0x70" module parameter.Here it is, though some parts seem to be missing because of kernel buffer overflow with syslog getting no opportunity to capture it all (even though it's already pretty large, shift 18) -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-13 17:44 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #3 from Francisco Jerez <currojerez at riseup.net> 2010-02-13 09:44:28 PST --- It seems nv1a has the DDC lines somewhere else. Is "nv" able to fetch an EDID? Probably not but it's worth a try. If it doesn't then an mmiotrace from the blob would be useful (see [1] and the docs in the kernel tree). [1] http://nouveau.freedesktop.org/wiki/MmioTrace -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-14 12:49 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #4 from Bruno <bonbons67 at internet.lu> 2010-02-14 04:48:59 PST --- (In reply to comment #3)> Is "nv" able to fetch an EDID? > Probably not but it's worth a try. If it doesn't then an mmiotrace from the > blob would be useful (see [1] and the docs in the kernel tree).nvidiafb seems unable to read EDID, none of the 3 i2c channels it registers return an EDID. Xorg with nv driver 2.1.6 isn't able to get an EDID either. Will now have look at the blob to get the mmio trace (with 2.6.30.4 kernel). -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-14 13:33 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #5 from Bruno <bonbons67 at internet.lu> 2010-02-14 05:33:14 PST --- (In reply to comment #3)> If it doesn't then an mmiotrace from the blob would be usefulMMIO trace, captured with not so recent 2.6.30.4 kernel and 96.43.14 blob can be found at below URL (attachments being limited to 1MB): http://homepage.internet.lu/BrunoP/nvidia.tbz2 The kernel log shows first loading blob 96.43.11, then later on 96.43.14. This is due to Xorg that got updated recently and older userspace blob complaining about dependencies, so I had to update the blob as well. The Xorg server crashes shortly after loading but has already read EDID by that time so I guess no need to care about that :) -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-17 19:23 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #6 from Francisco Jerez <currojerez at riseup.net> 2010-02-17 11:23:13 PST --- Created an attachment (id=33363) --> (http://bugs.freedesktop.org/attachment.cgi?id=33363) nv1a_ddc.patch Could you try the attached patch? Any effect at all? -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-18 17:47 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #7 from Bruno <bonbons67 at internet.lu> 2010-02-18 09:47:47 PST --- (In reply to comment #6)> Created an attachment (id=33363)--> (http://bugs.freedesktop.org/attachment.cgi?id=33363) [details]> nv1a_ddc.patch > > Could you try the attached patch? Any effect at all?Yes there is a difference, it now says that my VGA monitor is connected via DVI (no such connector!) and does not list card-VGA-* anymore under /sys/class/dri/. I would say the visible part is more bad than good... If you need more info, please ask. [ 652.499815] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 16 [ 652.499899] nouveau 0000:02:00.0: PCI INT A -> Link[LNK5] -> GSI 16 (level, high) -> IRQ 16 [ 652.506128] [drm] nouveau 0000:02:00.0: failed to evaluate _DSM: 5 [ 652.506577] [drm] nouveau 0000:02:00.0: Detected an NV10 generation card (0x01a000b1) [ 652.506803] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PROM [ 652.506865] [drm] nouveau 0000:02:00.0: ... BIOS signature not found [ 652.506920] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN [ 652.552228] [drm] nouveau 0000:02:00.0: ... BIOS checksum invalid [ 652.553204] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PCIROM [ 652.553930] [drm] nouveau 0000:02:00.0: ... appears to be valid [ 652.554311] [drm] nouveau 0000:02:00.0: BMP BIOS found [ 652.554361] [drm] nouveau 0000:02:00.0: BMP version 5.20 [ 652.554416] [drm] nouveau 0000:02:00.0: Bios version 03.1a.01.03 [ 652.554471] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 1.4 [ 652.554532] [drm] nouveau 0000:02:00.0: No useful information in BIOS output table; adding all possible outputs [ 652.554598] [drm] nouveau 0000:02:00.0: Probing TV encoders on I2C bus: 1 [ 652.559842] [drm] nouveau 0000:02:00.0: No TV encoders found. [ 652.560217] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xA850 [ 652.560280] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xADC5 [ 652.560345] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xA851 [ 652.560409] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xADC4 [ 652.560470] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xA875 [ 652.560530] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 5 at offset 0xA931 [ 652.560606] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 6 at offset 0xA876 [ 652.560682] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 7 at offset 0xA8CC [ 652.573465] [TTM] Zone kernel: Available graphics memory: 240446 kiB. [ 652.573540] [drm] nouveau 0000:02:00.0: 32 MiB VRAM [ 652.573674] agpgart-nvidia 0000:00:00.0: AGP 2.0 bridge [ 652.573741] agpgart-nvidia 0000:00:00.0: putting AGP V2 device into 4x mode [ 652.573844] nouveau 0000:02:00.0: putting AGP V2 device into 4x mode [ 652.573898] [drm] nouveau 0000:02:00.0: 32 MiB GART (aperture) [ 652.574242] [drm] nouveau 0000:02:00.0: Allocating FIFO number 0 [ 652.575687] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 652.575799] [drm] nouveau 0000:02:00.0: Saving VGA fonts [ 652.621722] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector [ 652.622843] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 652.622909] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 652.667225] [drm] nouveau 0000:02:00.0: Load detected on head A [ 652.667528] [drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x45000, bo db6f2000 [ 652.668186] fbcon: nouveaufb (fb0) is primary device [ 652.680032] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 652.680040] [drm] nouveau 0000:02:00.0: Output DVI-I-1 is running on CRTC 0 using output @ [ 652.681377] Console: switching to colour frame buffer device 128x48 [ 652.682941] fb0: nouveaufb frame buffer device [ 652.682944] registered panic notifier [ 652.683465] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0 [ 652.684647] modprobe used greatest stack depth: 848 bytes left -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-20 15:12 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534
Francisco Jerez <currojerez at riseup.net> changed:
What |Removed |Added
----------------------------------------------------------------------------
Attachment #33363|0 |1
is obsolete| |
--- Comment #8 from Francisco Jerez <currojerez at riseup.net> 2010-02-20
07:12:05 PST ---
Created an attachment (id=33448)
--> (http://bugs.freedesktop.org/attachment.cgi?id=33448)
nv1a_ddc_2.patch
Any luck with this patch instead?
--
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-20 15:47 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #9 from Bruno <bonbons67 at internet.lu> 2010-02-20 07:47:14 PST --- (In reply to comment #8)> Created an attachment (id=33448)--> (http://bugs.freedesktop.org/attachment.cgi?id=33448) [details]> nv1a_ddc_2.patch > > Any luck with this patch instead? >No EDID discovered yet, but it now detects same connectors as initially: card0-DVI-D-1 card0-VGA-1 [ 552.251506] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 16 [ 552.251587] nouveau 0000:02:00.0: PCI INT A -> Link[LNK5] -> GSI 16 (level, high) -> IRQ 16 [ 552.257353] [drm] nouveau 0000:02:00.0: failed to evaluate _DSM: 5 [ 552.257805] [drm] nouveau 0000:02:00.0: Detected an NV10 generation card (0x01a000b1) [ 552.258032] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PROM [ 552.258095] [drm] nouveau 0000:02:00.0: ... BIOS signature not found [ 552.258151] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN [ 552.303570] [drm] nouveau 0000:02:00.0: ... BIOS checksum invalid [ 552.303622] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PCIROM [ 552.304347] [drm] nouveau 0000:02:00.0: ... appears to be valid [ 552.304724] [drm] nouveau 0000:02:00.0: BMP BIOS found [ 552.304774] [drm] nouveau 0000:02:00.0: BMP version 5.20 [ 552.304828] [drm] nouveau 0000:02:00.0: Bios version 03.1a.01.03 [ 552.304883] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 1.4 [ 552.304944] [drm] nouveau 0000:02:00.0: No useful information in BIOS output table; adding all possible outputs [ 552.305011] [drm] nouveau 0000:02:00.0: Probing TV encoders on I2C bus: 1 [ 552.309221] [drm] nouveau 0000:02:00.0: No TV encoders found. [ 552.309551] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xA850 [ 552.309612] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xADC5 [ 552.309678] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xA851 [ 552.309742] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xADC4 [ 552.309803] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xA875 [ 552.309864] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 5 at offset 0xA931 [ 552.309940] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 6 at offset 0xA876 [ 552.310040] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 7 at offset 0xA8CC [ 552.322192] [TTM] Zone kernel: Available graphics memory: 240446 kiB. [ 552.322268] [drm] nouveau 0000:02:00.0: 32 MiB VRAM [ 552.322401] agpgart-nvidia 0000:00:00.0: AGP 2.0 bridge [ 552.322468] agpgart-nvidia 0000:00:00.0: putting AGP V2 device into 4x mode [ 552.322570] nouveau 0000:02:00.0: putting AGP V2 device into 4x mode [ 552.322625] [drm] nouveau 0000:02:00.0: 32 MiB GART (aperture) [ 552.322985] [drm] nouveau 0000:02:00.0: Allocating FIFO number 0 [ 552.324413] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 552.324524] [drm] nouveau 0000:02:00.0: Saving VGA fonts [ 552.371309] [drm] nouveau 0000:02:00.0: Detected a VGA connector [ 552.372091] [drm] nouveau 0000:02:00.0: Detected a DVI-D connector [ 552.372971] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 552.373035] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 552.383415] nv1a i2c base: 0 [ 552.568795] [drm] nouveau 0000:02:00.0: Load detected on head A [ 552.572884] [drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x45000, bo db93f400 [ 552.573509] fbcon: nouveaufb (fb0) is primary device [ 552.585146] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 552.585153] [drm] nouveau 0000:02:00.0: Output VGA-1 is running on CRTC 0 using output @ [ 552.586229] Console: switching to colour frame buffer device 128x48 [ 552.587746] fb0: nouveaufb frame buffer device [ 552.587762] registered panic notifier [ 552.587787] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0 [ 637.700024] [drm] nouveau 0000:02:00.0: Setting dpms mode 1 on vga encoder (output 0) -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-20 16:35 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #10 from Francisco Jerez <currojerez at riseup.net> 2010-02-20 08:35:43 PST --- An i/o trace of your BIOS posting the card might be useful, to do it you would have to download [1], compile it and run (as root and in text mode, i.e. neither X nor fb drivers running): # ./vbtracetool -p -l 2>nv1a_post.log [1] git://people.freedesktop.org/~stuart/vbtracetool -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-20 16:57 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #11 from Bruno <bonbons67 at internet.lu> 2010-02-20 08:57:29 PST --- (In reply to comment #10)> An i/o trace of your BIOS posting the card might be useful, to do it you would > have to download [1], compile it and run (as root and in text mode, i.e. > neither X nor fb drivers running): > # ./vbtracetool -p -l 2>nv1a_post.log > > [1] git://people.freedesktop.org/~stuart/vbtracetool >What am I missing, it just returns the following on me, running it as root: ./vbtracetool -p -l mmap /dev/zero: Operation not permitted Failed to initialise LRMI (Linux Real-Mode Interface). -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-20 17:14 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #12 from Bruno <bonbons67 at internet.lu> 2010-02-20 09:14:04 PST --- Created an attachment (id=33451) --> (http://bugs.freedesktop.org/attachment.cgi?id=33451) Compressed log from vbtracetool (In reply to comment #11)> (In reply to comment #10) > > An i/o trace of your BIOS posting the card might be useful, to do it you would > > have to download [1], compile it and run (as root and in text mode, i.e. > > neither X nor fb drivers running): > > # ./vbtracetool -p -l 2>nv1a_post.log > > > > [1] git://people.freedesktop.org/~stuart/vbtracetool> ./vbtracetool -p -l > mmap /dev/zero: Operation not permitted > Failed to initialise LRMI (Linux Real-Mode Interface).This was caused by /dev being mounted noexec Note, the posting done by VBTraceTool is not perfect, display show just kind of garbage (mostly black but a few fancy colored character placeholders) -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-20 17:43 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #13 from Francisco Jerez <currojerez at riseup.net> 2010-02-20 09:43:22 PST --- Created an attachment (id=33455) --> (http://bugs.freedesktop.org/attachment.cgi?id=33455) nv1a_ddc_3.patch Could you try again with this one? -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-20 18:02 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #14 from Bruno <bonbons67 at internet.lu> 2010-02-20 10:02:50 PST --- (In reply to comment #13)> Created an attachment (id=33455)--> (http://bugs.freedesktop.org/attachment.cgi?id=33455) [details]> nv1a_ddc_3.patch > > Could you try again with this one? >Still no EDID: [ 484.935609] nouveau 0000:02:00.0: PCI INT A -> Link[LNK5] -> GSI 16 (level, high) -> IRQ 16 [ 484.941696] [drm] nouveau 0000:02:00.0: failed to evaluate _DSM: 5 [ 484.942152] [drm] nouveau 0000:02:00.0: Detected an NV10 generation card (0x01a000b1) [ 484.942378] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PROM [ 484.942443] [drm] nouveau 0000:02:00.0: ... BIOS signature not found [ 484.942500] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN [ 484.987738] [drm] nouveau 0000:02:00.0: ... BIOS checksum invalid [ 484.987791] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PCIROM [ 484.988482] [drm] nouveau 0000:02:00.0: ... appears to be valid [ 484.988859] [drm] nouveau 0000:02:00.0: BMP BIOS found [ 484.988910] [drm] nouveau 0000:02:00.0: BMP version 5.20 [ 484.988964] [drm] nouveau 0000:02:00.0: Bios version 03.1a.01.03 [ 484.989019] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 1.4 [ 484.989080] [drm] nouveau 0000:02:00.0: No useful information in BIOS output table; adding all possible outputs [ 484.989146] [drm] nouveau 0000:02:00.0: Probing TV encoders on I2C bus: 1 [ 484.994316] [drm] nouveau 0000:02:00.0: No TV encoders found. [ 484.994661] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xA850 [ 484.994723] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xADC5 [ 484.994789] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xA851 [ 484.994852] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xADC4 [ 484.994913] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xA875 [ 484.994974] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 5 at offset 0xA931 [ 484.995050] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 6 at offset 0xA876 [ 484.995126] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 7 at offset 0xA8CC [ 485.008021] [TTM] Zone kernel: Available graphics memory: 240446 kiB. [ 485.008109] [drm] nouveau 0000:02:00.0: 32 MiB VRAM [ 485.008252] agpgart-nvidia 0000:00:00.0: AGP 2.0 bridge [ 485.008323] agpgart-nvidia 0000:00:00.0: putting AGP V2 device into 4x mode [ 485.008424] nouveau 0000:02:00.0: putting AGP V2 device into 4x mode [ 485.008477] [drm] nouveau 0000:02:00.0: 32 MiB GART (aperture) [ 485.008823] [drm] nouveau 0000:02:00.0: Allocating FIFO number 0 [ 485.010856] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 485.010961] [drm] nouveau 0000:02:00.0: Saving VGA fonts [ 485.056430] [drm] nouveau 0000:02:00.0: Detected a VGA connector [ 485.057261] [drm] nouveau 0000:02:00.0: Detected a DVI-D connector [ 485.058137] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 485.058202] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 485.071773] nv1a i2c base: 5010 [ 485.097535] [drm] nouveau 0000:02:00.0: Load detected on head A [ 485.101753] [drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x45000, bo dbcf8400 [ 485.102474] fbcon: nouveaufb (fb0) is primary device [ 485.114118] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 485.114126] [drm] nouveau 0000:02:00.0: Output VGA-1 is running on CRTC 0 using output @ [ 485.115494] Console: switching to colour frame buffer device 128x48 [ 485.117021] fb0: nouveaufb frame buffer device [ 485.117024] registered panic notifier [ 485.117494] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0 [ 485.118838] modprobe used greatest stack depth: 832 bytes left -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-20 18:15 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #15 from Bruno <bonbons67 at internet.lu> 2010-02-20 10:15:20 PST --- Created an attachment (id=33459) --> (http://bugs.freedesktop.org/attachment.cgi?id=33459) lspci -vvv, /proc/ioports, /proc/iomem -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2010-Feb-20 19:07 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
http://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #16 from Bruno <bonbons67 at internet.lu> 2010-02-20 11:07:47 PST --- Created an attachment (id=33463) --> (http://bugs.freedesktop.org/attachment.cgi?id=33463) vbtracetool POST trace without amd756_smbus and without S3 since last boot -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
bugzilla-daemon at freedesktop.org
2013-Aug-18 18:09 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
https://bugs.freedesktop.org/show_bug.cgi?id=26534
Ilia Mirkin <imirkin at alum.mit.edu> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution|--- |INVALID
--- Comment #17 from Ilia Mirkin <imirkin at alum.mit.edu> ---
It appears that this bug report has laid dormant for quite a while. Sorry we
haven't gotten to it. Since we fix bugs all the time, chances are pretty
good
that your issue has been fixed with the latest software. Please give it a shot.
(Linux kernel 3.10.7, xf86-video-nouveau 1.0.9, mesa 9.1.6, or their git
versions.) If upgrading to the latest isn't an option for you, your
distro's
bugzilla is probably the right destination for your bug report.
In an effort to clean up our bug list, we're pre-emptively closing all bugs
that haven't seen updates since 2011. If the original issue remains, please
make sure to provide fresh info, see http://nouveau.freedesktop.org/wiki/Bugs/
for what we need to see, and re-open this one.
Thanks,
The Nouveau Team
--
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.freedesktop.org/archives/nouveau/attachments/20130818/de237999/attachment-0001.html>
bugzilla-daemon at freedesktop.org
2013-Aug-19 18:03 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
https://bugs.freedesktop.org/show_bug.cgi?id=26534
Bruno <bonbons67 at internet.lu> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|RESOLVED |REOPENED
Resolution|INVALID |---
--- Comment #18 from Bruno <bonbons67 at internet.lu> ---
This still applies to 3.10.7 and monitor thinks "no signal".
ls /sys/class/drm/
card0/ card0-DVI-I-1/ controlD64/ ttm/ version
grep . /sys/class/drm/card0-DVI-I-1/*
/sys/class/drm/card0-DVI-I-1/dpms:On
/sys/class/drm/card0-DVI-I-1/enabled:enabled
/sys/class/drm/card0-DVI-I-1/modes:1024x768
/sys/class/drm/card0-DVI-I-1/modes:800x600
/sys/class/drm/card0-DVI-I-1/modes:800x600
/sys/class/drm/card0-DVI-I-1/modes:848x480
/sys/class/drm/card0-DVI-I-1/modes:640x480
/sys/class/drm/card0-DVI-I-1/status:connected
/sys/class/drm/card0-DVI-I-1/subconnector:DVI-A
[ 225.735801] wmi: Mapper loaded
[ 226.511634] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 16
[ 226.520816] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x01a000b1
[ 226.526999] nouveau [ DEVICE][0000:02:00.0] Chipset: nForce (NV1A)
[ 226.533419] nouveau [ DEVICE][0000:02:00.0] Family : NV10
[ 226.540887] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
[ 226.582453] nouveau [ VBIOS][0000:02:00.0] ... checksum invalid
[ 226.588679] nouveau [ VBIOS][0000:02:00.0] checking PROM for image...
[ 226.595440] nouveau [ VBIOS][0000:02:00.0] ... signature not found
[ 226.601929] nouveau [ VBIOS][0000:02:00.0] checking ACPI for image...
[ 226.608708] nouveau [ VBIOS][0000:02:00.0] ... signature not found
[ 226.615196] nouveau [ VBIOS][0000:02:00.0] checking PCIROM for image...
[ 226.622955] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
[ 226.629467] nouveau [ VBIOS][0000:02:00.0] using image from PCIROM
[ 226.635980] nouveau [ VBIOS][0000:02:00.0] BMP version 5.14
[ 226.642147] nouveau [ VBIOS][0000:02:00.0] version 03.1a.01.03.00
[ 226.648572] nouveau W[ VBIOS][0000:02:00.0] DCB contains no useful data
[ 226.656527] nouveau W[ VBIOS][0000:02:00.0] DCB contains no useful data
[ 226.664297] nouveau W[ VBIOS][0000:02:00.0] DCB contains no useful data
[ 226.671167] nouveau W[ VBIOS][0000:02:00.0] DCB contains no useful data
[ 226.678127] nouveau W[ PTIMER][0000:02:00.0] unknown input clock freq
[ 226.684735] nouveau [ PFB][0000:02:00.0] RAM type: stolen system memory
[ 226.691834] nouveau [ PFB][0000:02:00.0] RAM size: 32 MiB
[ 226.697701] nouveau [ PFB][0000:02:00.0] ZCOMP: 0 tags
[ 226.708701] agpgart-nvidia 0000:00:00.0: AGP 2.0 bridge
[ 226.713990] agpgart-nvidia 0000:00:00.0: putting AGP V2 device into 4x mode
[ 226.721050] nouveau 0000:02:00.0: putting AGP V2 device into 4x mode
[ 226.727609] [TTM] Zone kernel: Available graphics memory: 239574 kiB
[ 226.734095] [TTM] Initializing pool allocator
[ 226.738689] nouveau [ DRM] VRAM: 31 MiB
[ 226.743102] nouveau [ DRM] GART: 64 MiB
[ 226.747442] nouveau [ DRM] BMP version 5.20
[ 226.752115] nouveau W[ DRM] No useful DCB data in VBIOS
[ 226.760337] nouveau [ DRM] Saving VGA fonts
[ 226.810644] nouveau W[ DRM] No useful DCB data in VBIOS
[ 226.819047] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 226.825768] [drm] No driver support for vblank timestamp query.
[ 226.831876] nouveau [ DRM] 0xAFD8: Parsing digital output script table
[ 226.839109] nouveau [ DRM] 0 available performance level(s)
[ 226.845181] nouveau [ DRM] c: core 305MHz memory 0MHz
[ 226.852613] nouveau [ DRM] MM: using M2MF for buffer copies
[ 227.049415] nouveau [ DRM] allocated 1024x768 fb: 0x5000, bo dba934a0
[ 227.058378] fbcon: nouveaufb (fb0) is primary device
[ 227.072731] Console: switching to colour frame buffer device 128x48
[ 227.084818] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[ 227.084821] nouveau 0000:02:00.0: registered panic notifier
[ 227.097334] [drm] Initialized nouveau 1.1.1 20120801 for 0000:02:00.0 on
minor 0
--
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.freedesktop.org/archives/nouveau/attachments/20130819/90a642b0/attachment-0001.html>
bugzilla-daemon at freedesktop.org
2013-Aug-19 18:15 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
https://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #19 from Ilia Mirkin <imirkin at alum.mit.edu> --- Thanks for re-testing and sorry the issue is still there =/ One thing that does appear to be missing from this bug report is your vbios (/sys/kernel/debug/dri/0/vbios.rom). -- You are receiving this mail because: You are the assignee for the bug. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20130819/4168af44/attachment.html>
bugzilla-daemon at freedesktop.org
2013-Aug-19 19:07 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
https://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #20 from Bruno <bonbons67 at internet.lu> --- Created attachment 84284 --> https://bugs.freedesktop.org/attachment.cgi?id=84284&action=edit VBIOS, extracted with 3.11-rc6 Same behavior with 3.11-rc6 as with 3.10.7 (or even 3.8.2) -- You are receiving this mail because: You are the assignee for the bug. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20130819/ec58cd4a/attachment.html>
bugzilla-daemon at freedesktop.org
2013-Aug-27 20:47 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
https://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #21 from Bruno <bonbons67 at internet.lu> --- *** Bug 50374 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You are the assignee for the bug. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20130827/0fc6eed7/attachment.html>
bugzilla-daemon at freedesktop.org
2015-Jan-17 00:04 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
https://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #22 from Tobias Klausmann <tobias.klausmann at mni.thm.de> --- Can you still reproduce this with recent kernels (3.17, 3.18)? -- You are receiving this mail because: You are the assignee for the bug. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20150117/8d54d4f1/attachment.html>
bugzilla-daemon at freedesktop.org
2015-Jan-17 19:31 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
https://bugs.freedesktop.org/show_bug.cgi?id=26534 --- Comment #23 from Bruno <bonbons at sysophe.eu> --- (In reply to Tobias Klausmann from comment #22)> Can you still reproduce this with recent kernels (3.17, 3.18)?Still no EDID with 3.19-rc4. Display is 1280x1024. [ 167.174936] wmi: Mapper loaded [ 167.741143] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 12 [ 167.746985] PCI: setting IRQ 12 as level-triggered [ 167.752469] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x01a000b1 [ 167.758658] nouveau [ DEVICE][0000:02:00.0] Chipset: nForce (NV1A) [ 167.765100] nouveau [ DEVICE][0000:02:00.0] Family : NV10 [ 167.771697] nouveau [ VBIOS][0000:02:00.0] using image from PCIROM [ 167.778201] nouveau [ VBIOS][0000:02:00.0] BMP version 5.14 [ 167.784381] nouveau [ VBIOS][0000:02:00.0] version 03.1a.01.03.00 [ 167.791273] nouveau W[ VBIOS][0000:02:00.0] DCB contains no useful data [ 167.799240] nouveau W[ VBIOS][0000:02:00.0] DCB contains no useful data [ 167.807600] nouveau W[ VBIOS][0000:02:00.0] DCB contains no useful data [ 167.814512] nouveau W[ VBIOS][0000:02:00.0] DCB contains no useful data [ 167.821518] nouveau W[ PTIMER][0000:02:00.0] unknown input clock freq [ 167.828120] nouveau [ PFB][0000:02:00.0] RAM type: stolen system memory [ 167.835234] nouveau [ PFB][0000:02:00.0] RAM size: 32 MiB [ 167.841139] nouveau [ PFB][0000:02:00.0] ZCOMP: 0 tags [ 167.852591] nouveau [ CLK][0000:02:00.0] --: [ 167.857683] nouveau W[ VBIOS][0000:02:00.0] DCB contains no useful data [ 167.864850] agpgart-nvidia 0000:00:00.0: AGP 2.0 bridge [ 167.870179] agpgart-nvidia 0000:00:00.0: putting AGP V2 device into 4x mode [ 167.877243] nouveau 0000:02:00.0: putting AGP V2 device into 4x mode [ 167.883932] [TTM] Zone kernel: Available graphics memory: 239288 kiB [ 167.890440] [TTM] Initializing pool allocator [ 167.894958] nouveau [ DRM] VRAM: 31 MiB [ 167.899288] nouveau [ DRM] GART: 64 MiB [ 167.903630] nouveau [ DRM] BMP version 5.20 [ 167.908309] nouveau W[ DRM] No useful DCB data in VBIOS [ 167.916315] nouveau [ DRM] Saving VGA fonts [ 167.966599] nouveau W[ DRM] No useful DCB data in VBIOS [ 167.976050] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 167.982817] [drm] Driver supports precise vblank timestamp query. [ 167.988978] nouveau [ DRM] 0xAFD8: Parsing digital output script table [ 167.998183] nouveau [ DRM] MM: using M2MF for buffer copies [ 168.187976] nouveau [ DRM] allocated 1024x768 fb: 0x4000, bo dce79860 [ 168.196704] fbcon: nouveaufb (fb0) is primary device [ 168.291627] Console: switching to colour frame buffer device 128x48 [ 168.303855] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device [ 168.310249] nouveau 0000:02:00.0: registered panic notifier [ 168.316347] [drm] Initialized nouveau 1.2.1 20120801 for 0000:02:00.0 on minor 0 [ 168.325385] modprobe (1568) used greatest stack depth: 5160 bytes left -- You are receiving this mail because: You are the assignee for the bug. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20150117/025a44bf/attachment-0001.html>
bugzilla-daemon at freedesktop.org
2019-Dec-04 08:23 UTC
[Nouveau] [Bug 26534] nouveau does not fetch edid from connected monitor on nforce1 (nv1a)
https://bugs.freedesktop.org/show_bug.cgi?id=26534
Martin Peres <martin.peres at free.fr> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|REOPENED |RESOLVED
Resolution|--- |MOVED
--- Comment #24 from Martin Peres <martin.peres at free.fr> ---
-- GitLab Migration Automatic Message --
This bug has been migrated to freedesktop.org's GitLab instance and has been
closed from further activity.
You can subscribe and participate further through the new bug through this link
to our GitLab instance:
https://gitlab.freedesktop.org/xorg/driver/xf86-video-nouveau/issues/4.
--
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/nouveau/attachments/20191204/0e02468d/attachment.html>
Maybe Matching Threads
- [Bug 26555] New: nouveau fails to fully resume nforce1 (nv1a) after S3
- [Bug 25619] New: nouveau fails to detect connected monitor on nforce1 (nv1a)
- Kernel crash in 3.17-rc1 when loading nouveau on (non-POSTed) NV1A
- [Bug 87552] New: [NV1A] 3.18.1 BUG on modprobe nouveau in drivers/gpu/drm/nouveau/core/core/event.c:42
- [Bug 27905] New: DVI monitor is blank - DVI detected as Display Port ?