Nouveau - Oct 2008 - [Bug 18286] New: GeForce 8300 not supported (10de:0848/C77/MCP77)

http://bugs.freedesktop.org/show_bug.cgi?id=18286

           Summary: GeForce 8300 not supported (10de:0848/C77/MCP77)
           Product: xorg
           Version: 7.4
          Platform: Other
        OS/Version: All
            Status: NEW
          Severity: normal
          Priority: medium
         Component: Driver/nouveau
        AssignedTo: nouveau at lists.freedesktop.org
        ReportedBy: sbrandt at gmx.de
         QAContact: xorg-team at lists.x.org


Created an attachment (id=19924)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=19924)
excerpt of Xorg.log with detection/startup messages

The GeForce 8300 graphics chip is not supported by the nouveau
driver of the current (7.4) xorg release. 
(Neither by the open source NVidia driver, see bug #18092 and bug #17526)

The 8300 is only available as OEM/on board, e.g., on the ASUS M3N/H-HDMI
mainboard. Called mGPU (Motherboard GPU) now, by NVidia.
lscpi: 02:00.0 VGA compatible controller: nVidia Corporation Device 0848 (rev
a2)
lspci -n: 02:00.0 0300: 10de:0848 (rev a2)
http://pci-ids.ucw.cz/read/PC/10de/0848 

According to
http://en.wikipedia.org/wiki/GeForce_8_Series#Geforce_8300_and_8400, it has a
G86 core. Or maybe not - I think they refer to the 8300 GS.

NVidia proprietary driver supports it, of course (since at least 173.14.05)
(II) NVIDIA(0): NVIDIA GPU GeForce 8300 (C77) at PCI:2:0:0 (GPU-0).

I changed the nv_driver.c to get some information about the architecture, and
to try to support it. 

static int NVGetArchitecture(volatile uint32_t *regs) ...
Architecture is detected as 0xAA.

static Bool NVPciProbe
Allowed architecture up to 0xAA (was 0x9F before).

Excerpt from Xorg.log is attached, where libglx.so was still set to closed
source nvidia. [SBr] log messages have been added by myself.

After correcting the glx, the X server crashed quite hard. I will do this again
and attach the log.
Pls tell me whether you need ReNouveau or MMIO Trace dumps.


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #1 from Sebastian Brandt <sbrandt at gmx.de>  2008-10-29
00:51:26 PST ---
Created an attachment (id=19925)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=19925)
Xorg.log 

Xorg.log ... started X, screen switched and went blank.
Nothing else happened, switching back to console did not work.
Only SysRQ worked (see next attachment)


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #2 from Sebastian Brandt <sbrandt at gmx.de>  2008-10-29
00:57:34 PST ---
Created an attachment (id=19926)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=19926)
messages from load drm/nouveau.ko till reboot

Excerpt of /var/log/messages:
- loading the current git drm.ko and nouveau.ko
- starting X
- SysRQ: show Tasks, shoW blocking tasks
  (no usable information, there, I belive)
- SysRQ: unRaw (did not help)
- SysRQ: S-U-S-B

Initialized drm 1.1.0 20060810
Initialized nouveau 0.0.11 libdrm-2.4.0-12-ge47ab7a5081e178ba on minor 0

By the way ...
System is opensuse 11.0/x86_64/2.6.25.18-0.2-default
Phenom X4 9750 2.4GHz 4GB
ASUS M3N-H/HDMI w/ GeForce 8300 chipset (of course ;-), 256 MB shared mem


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #3 from Ben Skeggs <skeggsb at gmail.com>  2009-02-15 00:51:03
PST ---
Any change with latest git?


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #4 from Sebastian Brandt <sbrandt at gmx.de>  2009-03-03
13:28:34 PST ---
Sorry, but current git crashes ...
short version below, more info in the attachments.
Took some time to get that far, I still had too many versions of glx, drm,
nouveau, etc. lying around ...

[...]
(II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled
message.
(II) NOUVEAU(0): nv50_crtc_gamma_set is called for CRTC0.
(II) NOUVEAU(0): NV50CrtcGammaSet is called for CRTC0.

Backtrace:
0: X(xf86SigHandler+0x65) [0x47e715]
1: /lib64/libc.so.6 [0x7fe7331666e0]
2: /usr/lib64/xorg/modules//drivers/nouveau_drv.so [0x7fe7302f02a7]
3: X [0x4acdf2]
4: /usr/lib64/xorg/modules//drivers/nouveau_drv.so [0x7fe7302d0613]
5: X [0x485ef2]
6: X [0x486028]
7: X(xf86HandleColormaps+0x281) [0x487021]
8: /usr/lib64/xorg/modules//drivers/nouveau_drv.so [0x7fe7302d00cb]
9: X(AddScreen+0x1c9) [0x4319a9]
10: X(InitOutput+0x241) [0x466f71]
11: X(main+0x286) [0x432146]
12: /lib64/libc.so.6(__libc_start_main+0xe6) [0x7fe733152586]
13: X [0x4316f9]

Fatal server error:
Caught signal 11.  Server aborting

(II) NOUVEAU(0): NVLeaveVT is called.
(II) NOUVEAU(0): NV50DispShutdown is called.
[...]


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #5 from Sebastian Brandt <sbrandt at gmx.de>  2009-03-03
13:34:04 PST ---
Created an attachment (id=23484)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=23484)
Xorg log with nouveau git

ends with segfault.
Interestingly, the drm and nouveau kernel modules are *not* loaded.
They are not loaded automatically, and loading them manually does not change
anything.
It seems the driver crashes before needing the kernel modules ...


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #6 from Sebastian Brandt <sbrandt at gmx.de>  2009-03-03
13:35:31 PST ---
Created an attachment (id=23485)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=23485)
dmesg of system. 

drm and nouveau.ko were loaded after X crashed


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #7 from Maarten Maathuis <madman2003 at gmail.com>  2009-03-03
13:51:19 PST ---
Please turn "NoAccel" off, retry, and file a seperate bug about
"NoAccel" not
working. Also some driver symbols would be handy usually, although in this case
it's fairly obvious where it's coming from (one of the gamma/lut
functions).


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #8 from Sebastian Brandt <sbrandt at gmx.de>  2009-03-03
13:53:58 PST ---
You are too fast ... still working on gdb ;-)

Program received signal SIGSEGV, Segmentation fault.
0x00007f5277cdd2a7 in NV50CrtcGammaSet (crtc=0x8020f0, red=0x80efd0,
    green=0x80f1d0, blue=0x80f3d0, size=<value optimized out>)
    at nv50_crtc.c:504
504             memcpy(crtc->lut->map, crtc->lut_values,
4*256*sizeof(uint16_t))
;
(gdb) p crtc
$1 = (nouveauCrtcPtr) 0x8020f0
(gdb) p *crtc
$2 = {scrn = 0x7ffa20, name = 0x0, index = 0 '\0', active = 1,
  front_buffer = 0x809600, fb_pitch = 5632, x = 0, y = 0, lut = 0x809810,
  lut_values = {{red = 0, green = 0, blue = 0, unused = 0}, {red = 64,
      green = 64, blue = 64, unused = 0}, {red = 128, green = 128,
      blue = 128, unused = 0}, {red = 192, green = 192, blue = 192,
      unused = 0}, {red = 256, green = 256, blue = 256, unused = 0}, {
[...]
  SetCursorPosition = 0x7f5277cdd420 <NV50CrtcSetCursorPosition>,
  LoadCursor = 0x7f5277cdd3a0 <NV50CrtcLoadCursor>,
  GammaSet = 0x7f5277cdd1e0 <NV50CrtcGammaSet>, Save = 0, Load = 0}
(gdb)
(gdb)
(gdb) where
#0  0x00007f5277cdd2a7 in NV50CrtcGammaSet (crtc=0x8020f0, red=0x80efd0,
    green=0x80f1d0, blue=0x80f3d0, size=<value optimized out>)
    at nv50_crtc.c:504
#1  0x00000000004acdf2 in ?? ()
#2  0x00007f5277cbd613 in NVLoadPalette (pScrn=0x7ffa20, numColors=256,
    indices=0x81a920, colors=0x81ad30, pVisual=0x0) at nv_driver.c:1924
#3  0x0000000000485ef2 in ?? ()
#4  0x0000000000486028 in ?? ()
#5  0x0000000000487021 in xf86HandleColormaps ()
#6  0x00007f5277cbd0cb in NVScreenInit (scrnIndex=0, pScreen=0x809200,
    argc=<value optimized out>, argv=<value optimized out>)
    at nv_driver.c:2253
#7  0x00000000004319a9 in AddScreen ()
#8  0x0000000000466f71 in InitOutput ()
#9  0x0000000000432146 in main ()
(gdb) l
499             /* This is pre-init, we don't have access to the lut bo now.
*/
500             if (!crtc->lut)
501                     return;
502
503             nouveau_bo_map(crtc->lut, NOUVEAU_BO_WR);
504             memcpy(crtc->lut->map, crtc->lut_values,
4*256*sizeof(uint16_t))
;
505             nouveau_bo_unmap(crtc->lut);
506     }
507
508     void
(gdb) p crtc->lut
$3 = (struct nouveau_bo *) 0x809810
(gdb) p *crtc->lut
$4 = {device = 0x7f5277ef7db0, handle = 0, size = 4096, map = 0x7f527dc12000,
  tiled = 0, flags = 33, offset = 267517952}
(gdb) p *(crtc->lut)
$5 = {device = 0x7f5277ef7db0, handle = 0, size = 4096, map = 0x7f527dc12000,
  tiled = 0, flags = 33, offset = 267517952}
(gdb) p *(crtc->lut->map)
Attempt to dereference a generic pointer.
(gdb) p crtc->lut->map
$6 = (void *) 0x7f527dc12000
(gdb) p crtc->lut_values
$7 = {{red = 0, green = 0, blue = 0, unused = 0}, {red = 64, green = 64,
    blue = 64, unused = 0}, {red = 128, green = 128, blue = 128, unused = 0},
  {red = 192, green = 192, blue = 192, unused = 0}, {red = 256, green = 256,
    blue = 256, unused = 0}, {red = 320, green = 320, blue = 320,
[...]
(gdb) p crtc->lut->map
$8 = (void *) 0x7f527dc12000
(gdb) p crtc->lut
$9 = (struct nouveau_bo *) 0x809810
(gdb) quit
The program is running.  Quit anyway (and kill it)? (y or n) y


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #9 from Sebastian Brandt <sbrandt at gmx.de>  2009-03-03
14:13:17 PST ---
Created an attachment (id=23486)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=23486)
Xorg.log with accel and drm/nouveau

Another try - this time, with accelaration and correct libglx.
No crash. X starts, but screen stays blank. No reaction to keyboard except
SysRQ.
[...]
(II) Mouse[1]: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/TTF/, removing from list!
Could not init font path element /usr/share/fonts/OTF, removing from list!

SysRQ StackTrace, show blocked
kill -9 on X via ssh
SysRQ unraw
Keyboard reacts, screen still blank.


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #10 from Sebastian Brandt <sbrandt at gmx.de>  2009-03-03
14:16:46 PST ---
Created an attachment (id=23487)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=23487)
dmesg - removed most of the Stack Trace

[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 20
nouveau 0000:02:00.0: PCI INT A -> Link[AIGP] -> GSI 20 (level, low) ->
IRQ 20
nouveau 0000:02:00.0: setting latency timer to 64
[drm] Detected an NV50 generation card (0x0aa400a2)
[drm] Initialized nouveau 0.0.12 libdrm-2.4.5-22-ga6dd0afa87558a670 on minor 0
mtrr: base(0xd8000000) is not aligned on a size(0x10000000) boundary
[drm] Allocating FIFO number 1
[drm] nouveau_fifo_alloc: initialised FIFO 1
[drm] Unhandled PFIFO_INTR - 0x00000010
[drm] Allocating FIFO number 2
[drm] nouveau_fifo_alloc: initialised FIFO 2
## now, X seems to be hanging ...
SysRq : Show State
[...]
X             R  running task        0  4023   3994
 ffff8800c5d9ff70 ffffffff8049b0a9 0000000000000296 ffff8800c5d9ff00
 ffffffff80a27000 ffffffff80a31600 ffffffff80a2e3f0 ffffffff80a31600
 ffffffff80a27000 ffffffff80a31600 ffffffff80a31600 ffffffff80a31600
Call Trace:
 [<ffffffff8020c5a7>] retint_careful+0xd/0x21
 [<00007f0ab955b478>] 0x7f0ab955b478
[...]
## killall -9 X
[drm] nouveau_fifo_free: freeing fifo 2
[drm:nouveau_fifo_free] *ERROR* Failed to idle channel 2 before destroy.Prepare
for strangeness..
[drm] nouveau_fifo_free: freeing fifo 1


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #11 from Sebastian Brandt <sbrandt at gmx.de>  2009-03-03
14:17:07 PST ---
Created an attachment (id=23488)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=23488)
complete dmesg as gz


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286


Vedran Mileti? <rivanvx at fastmail.fm> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |rivanvx at fastmail.fm




--- Comment #12 from Vedran Mileti? <rivanvx at fastmail.fm>  2009-06-05
09:50:14 PST ---
Is there any chance to get this working if NVIDIA *doesn't* add support for
these chips into nv?


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #13 from Maarten Maathuis <madman2003 at gmail.com> 
2009-06-05 10:07:37 PST ---
There is always a chance, in practice it will involve someone with sufficient
motivation, some experience and access to 8200/8300/9400(onboard version)/G200
hardware. The whole NVA0 series is still problematic.


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286


Ben Skeggs <skeggsb at gmail.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |ASSIGNED




--- Comment #14 from Ben Skeggs <skeggsb at gmail.com>  2009-06-29
00:07:17 PST ---
Can you follow the instructions at
http://nouveau.freedesktop.org/wiki/InstallDRM to install the latest DRM
(though, make sure you build the "master" branch and not
"newttm-devel" as
instructed there).

When you load the nouveau module, ensure you enable KMS by "modprobe
nouveau
modeset=1".  There's some changes recently which may help with this
chipset.

If you have any troubles, please stop by #nouveau on freenode!


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #15 from Sebastian Brandt <sbrandt at gmx.de>  2009-07-01
01:08:04 PST ---
Created an attachment (id=27287)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=27287)
ROM dump of GeForce 8300 mGPU

sudo ./vbtracetool -w 2> GF8300.rom
Using card 10de:0848 on 0200
Nvidia card -- using PROM/PRAMIN BIOS
Using card memory region at 0xfb000000
Attempting to locate BIOS image in PROM... BIOS signature not found
Attempting to locate BIOS image in PRAMIN... appears to be valid


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #16 from Sebastian Brandt <sbrandt at gmx.de>  2009-07-01
03:06:50 PST ---
I was unable to attach the mmiotrace (3.8>1MB) - you can find it on 
http://dbis.rwth-aachen.de/~brandt/nouveau/10de-0848-GeForce8300-mmiotrace.tar.gz

mmiotrace for GeForce 8300.
Created on kernel 2.6.27.23-0.1 x64 SMP (opensuse 11.1 default, but recompiled
with active MMIOTRACE), single cpu only.
contains mmiotrace itself, dmesg, lspci, commands to create it, and output of
X11.
trace_entries had to be raised to 520000.
Strangely, only one trace run could be done per system boot ... any subsequent
trace runs resulted in the "cat" process exiting ($?=0) after
nvidia.ko load.


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #17 from Sebastian Brandt <sbrandt at gmx.de>  2009-07-04
07:16:15 PST ---
Created an attachment (id=27380)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=27380)
dmesg from failed nouveau/modeset attempt

Got the current version of the nouveau kernel, compiled and installed it.
opensuse 11.1 has a .27 kernel, so, no way of adding the KMS drm stuff there.
used 2.6.31-rc1-0.1 nouveau x64
compiled and installed git drm and nouveau driver.

When booting with vesa fb, loading the nouveau modules with modeset=1 resulted
in a hung console.
When booting w/o framebuffer, loading the nouveau modules with modeset=1
resulted in a modeswitch, and the TFT going into powersave mode
(HDMI->DVI->TFT)
Starting X11 did not work, neither with modeset=1 nor =0.
[I need to repeat the Xorg test with non-nvidia glx driver.]

excerpt from dmesg:
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 20
nouveau 0000:02:00.0: PCI INT A -> Link[AIGP] -> GSI 20 (level, low) ->
IRQ 20
nouveau 0000:02:00.0: setting latency timer to 64
nouveau 0000:02:00.0: Detected an NV50 generation card (0x0aa400a2)
[TTM] TTM available graphics memory: 1539 MiB
[TTM] TTM available object memory: 1539 MiB
nouveau 0000:02:00.0: Allocating FIFO number 1
nouveau 0000:02:00.0: nouveau_fifo_alloc: initialised FIFO 1
nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
nouveau 0000:02:00.0: ... appears to be valid
nouveau 0000:02:00.0: BIT BIOS found
nouveau 0000:02:00.0: Bios version 62.77.1e.00
nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported
nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
nouveau 0000:02:00.0: Raw DCB entry 0: 01000300 0000001e
nouveau 0000:02:00.0: Raw DCB entry 1: 01011332 00020010
nouveau 0000:02:00.0: Raw DCB entry 2: 0000000e 00000000
nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xC672
nouveau 0000:02:00.0: ========== unknown reg 0x002FF0A8 =========nouveau
0000:02:00.0: ========== unknown reg 0x002FF0A8 =========nouveau 0000:02:00.0:
========== unknown reg 0x00021220 =========nouveau 0000:02:00.0: Could not find
a compatible set of PLL values
nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xC956
nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xC958
nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xCA3D
nouveau 0000:02:00.0: ========== unknown reg 0x00020010 =========nouveau
0000:02:00.0: ========== unknown reg 0x0002000C =========nouveau 0000:02:00.0:
========== unknown reg 0x0002000C =========nouveau 0000:02:00.0: Parsing VBIOS
init table 4 at offset 0xCB02
nouveau 0000:02:00.0: Detected a DAC output
nouveau 0000:02:00.0: Detected a TMDS output
nouveau 0000:02:00.0: Detected a VGA connector
nouveau-0000:02:00.0-VGA-1: Test OK
nouveau 0000:02:00.0: Detected a DVI-D connector
nouveau-0000:02:00.0-DVI-D-1: Test OK
allocated 1400x1050 fb: 0x40220000, bo ffff8800c10cbe00
Console: switching to colour frame buffer device 175x65
[drm] TMDS-8: set mode 1400x1050 1f
nouveau 0000:02:00.0: 0xB5A0: parsing output script 1
nouveau 0000:02:00.0: 0xB5A1: parsing output script 2
nouveau 0000:02:00.0: 0xB375: parsing clock script 0
nouveau 0000:02:00.0: 0xB38F: Init table command not found: 0x96
nouveau 0000:02:00.0: 0xACAA: parsing clock script 1
nouveau 0000:02:00.0: GPU lockup - switching to software fbcon
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.14 20090420 for 0000:02:00.0 on minor 0

** Information lost here, as next line repeated >30k times **
nouveau 0000:02:00.0: Unhandled PFIFO_INTR - 0x00000010


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #18 from Sebastian Brandt <sbrandt at gmx.de>  2009-07-04
07:32:56 PST ---
Created an attachment (id=27381)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=27381)
dmesg and xorg.log with nouveau/modeset

- modprobe nouveau modeset=1
- X -logverbose 9 -config xorg-nouveau.conf
with xorg glx.

end of xorg-log:
(EE) NOUVEAU(0): Failed to allocate framebuffer memory

Fatal server error:
AddScreen/ScreenInit failed for driver 0

dmesg repeats forever:
nouveau 0000:02:00.0: Unhandled PFIFO_INTR - 0x00000010


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #19 from Ben Skeggs <skeggsb at gmail.com>  2009-07-07
04:37:09 PST ---
I implemented the missing handler for opcode 0x96 in a script we run to setup
your outputs, hopefully you'll have more luck getting a display up and
running
if you update your drm.  If not, can you please repost your kernel log with
nouveau.modeset=1 and drm.debug=1.

Once we have a display up and running for the console we'll worry about
getting
X up :)


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #20 from Sebastian Brandt <sbrandt at gmx.de>  2009-07-07
12:29:32 PST ---
Created an attachment (id=27476)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=27476)
dmesg of sucessful modeset

GREAT - modeset works! 
Log messages:

[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 20
nouveau 0000:02:00.0: PCI INT A -> Link[AIGP] -> GSI 20 (level, low) ->
IRQ 20
nouveau 0000:02:00.0: setting latency timer to 64
nouveau 0000:02:00.0: Detected an NV50 generation card (0x0aa400a2)
[TTM] TTM available graphics memory: 1539 MiB
[TTM] TTM available object memory: 1539 MiB
nouveau 0000:02:00.0: Allocating FIFO number 1
nouveau 0000:02:00.0: nouveau_fifo_alloc: initialised FIFO 1
nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
nouveau 0000:02:00.0: ... appears to be valid
nouveau 0000:02:00.0: BIT BIOS found
nouveau 0000:02:00.0: Bios version 62.77.1e.00
nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported
nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
nouveau 0000:02:00.0: Raw DCB entry 0: 01000300 0000001e
nouveau 0000:02:00.0: Raw DCB entry 1: 01011332 00020010
nouveau 0000:02:00.0: Raw DCB entry 2: 0000000e 00000000
nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xC672
nouveau 0000:02:00.0: ========== unknown reg 0x002FF0A8 =========nouveau
0000:02:00.0: ========== unknown reg 0x002FF0A8 =========nouveau 0000:02:00.0:
========== unknown reg 0x00021220 =========nouveau 0000:02:00.0: Could not find
a compatible set of PLL values
nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xC956
nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xC958
nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xCA3D
nouveau 0000:02:00.0: ========== unknown reg 0x00020010 =========nouveau
0000:02:00.0: ========== unknown reg 0x0002000C =========nouveau 0000:02:00.0:
========== unknown reg 0x0002000C =========nouveau 0000:02:00.0: Parsing VBIOS
init table 4 at offset 0xCB02
nouveau 0000:02:00.0: Detected a DAC output
nouveau 0000:02:00.0: Detected a TMDS output
nouveau 0000:02:00.0: Detected a VGA connector
nouveau-0000:02:00.0-VGA-1: Test OK
nouveau 0000:02:00.0: Detected a DVI-D connector
nouveau-0000:02:00.0-DVI-D-1: Test OK
allocated 1400x1050 fb: 0x40220000, bo ffff880037c77000
Console: switching to colour frame buffer device 175x65
[drm] TMDS-8: set mode 1400x1050 1f
nouveau 0000:02:00.0: 0xB5A0: parsing output script 1
nouveau 0000:02:00.0: 0xB5A1: parsing output script 2
nouveau 0000:02:00.0: 0xB375: parsing clock script 0
nouveau 0000:02:00.0: ========== unknown reg 0x00021028 =========nouveau
0000:02:00.0: ========== unknown reg 0x00021028 =========nouveau 0000:02:00.0:
========== unknown reg 0x00021028 =========nouveau 0000:02:00.0: ==========
unknown reg 0x00021028 =========nouveau 0000:02:00.0: ========== unknown reg
0x00021028 =========nouveau 0000:02:00.0: ========== unknown reg 0x00021028
=========nouveau 0000:02:00.0: ========== unknown reg 0x00021028
=========nouveau 0000:02:00.0: ========== unknown reg 0x00021028
=========nouveau 0000:02:00.0: ========== unknown reg 0x00021028
=========nouveau 0000:02:00.0: ========== unknown reg 0x00021028
=========nouveau 0000:02:00.0: ========== unknown reg 0x00021028
=========nouveau 0000:02:00.0: ========== unknown reg 0x00021028
=========nouveau 0000:02:00.0: ========== unknown reg 0x00021028
=========nouveau 0000:02:00.0: ========== unknown reg 0x00021028
=========nouveau 0000:02:00.0: ========== unknown reg 0x00021028
=========nouveau 0000:02:00.0: ========== unknown reg 0x00021028
=========nouveau 0000:02:00.0: 0xACAA: parsing clock script 1
nouveau 0000:02:00.0: GPU lockup - switching to software fbcon
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.14 20090420 for 0000:02:00.0 on minor 0

Xorg still fails ;-)
dmesg:
nouveau 0000:02:00.0: Unhandled PFIFO_INTR - 0x00000010
* repeatet an awful lot of times *
nouveau 0000:02:00.0: Unhandled PFIFO_INTR - 0x00000010
[TTM]Failed moving buffer. Proposed placement 0x00070004
[TTM]Out of aperture space or DRM memory quota.

Xorg-log:
(EE) NOUVEAU(0): Failed to allocate framebuffer memory


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #21 from Vedran Mileti? <rivanvx at fastmail.fm>  2009-09-05
15:51:58 PST ---
*** Bug 18092 has been marked as a duplicate of this bug. ***


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286


Vedran Mileti? <rivanvx at fastmail.fm> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |d13f00l at gmail.com




--- Comment #22 from Vedran Mileti? <rivanvx at fastmail.fm>  2009-09-05
15:52:20 PST ---
*** Bug 17526 has been marked as a duplicate of this bug. ***


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286


Vedran Mileti? <rivanvx at fastmail.fm> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |haiku235 at gmail.com




--- Comment #23 from Vedran Mileti? <rivanvx at fastmail.fm>  2009-09-05
15:53:16 PST ---
*** Bug 20962 has been marked as a duplicate of this bug. ***


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286


Vedran Mileti? <rivanvx at fastmail.fm> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
            Summary|GeForce 8300 not supported  |GeForce 8200 and 8300 not
                   |(10de:0848/C77/MCP77)       |supported
                   |                            |(10de:0848/0849/C77/MCP77/MC
                   |                            |P78S)




--- Comment #24 from Vedran Mileti? <rivanvx at fastmail.fm>  2009-09-05
15:56:21 PST ---
Can we do any more testing to help developers resolve this?


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #25 from Chi-Thanh Christopher Nguyen <chithanh at
cs.tu-berlin.de>  2009-09-05 15:58:50 PST ---
I think bug 17526 and bug 18092 are not duplicates of this bug. They are filed
against the xf86-video-nv driver and not nouveau.


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #26 from Vedran Mileti? <rivanvx at fastmail.fm>  2009-09-05
16:11:15 PST ---
Oops, my bad. Fixing that.


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286


Vedran Mileti? <rivanvx at fastmail.fm> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
            Summary|GeForce 8200 and 8300 not   |[nouveau] GeForce 8200 and
                   |supported                   |8300 not supported
                   |(10de:0848/0849/C77/MCP77/MC|(10de:0848/0849/C77/MCP77/MC
                   |P78S)                       |P78S)




-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #27 from Josh Saddler <nightmorph at gentoo.org>  2009-12-01
10:53:30 PST ---
I have a motherboard with a built-in 8200 chip, MCP78S. What output do you need
for this bug, so's it can be properly supported in Nouveau? Right now even
the
binary nVidia driver doesn't work with it. Terrible performance; can't
even
move the mouse around. I'd love to help this bug out and get my chip
supported.


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #28 from Maarten Maathuis <madman2003 at gmail.com> 
2009-12-01 11:20:37 PST ---
Can someone actually confirm it doesn't work with the current version (with
KMS
enabled)?


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #29 from Stanislav K. <stas_main at mail.ru>  2010-01-16
21:03:39 PST ---
Created an attachment (id=32668)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=32668)
Xorg.0.log, nvidia 8200m g


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #30 from Stanislav K. <stas_main at mail.ru>  2010-01-16
21:04:42 PST ---
Created an attachment (id=32669)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=32669)
nvidia 8200m g bios dump


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #31 from Stanislav K. <stas_main at mail.ru>  2010-01-16
21:06:18 PST ---
I confirm that it doesn't work well on GeForce 8200M, even if kms is not
enabled.
If kms enabled it sets native screen resolution, xorg runs, but very slowly and
2d acceleration doesn't work.

02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200M G]
(rev a2)

Here is the dmesg with modeset=1:
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 21
nouveau 0000:02:00.0: PCI INT A -> Link[LGPU] -> GSI 21 (level, low) ->
IRQ 21
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: failed to evaluate _DSM: 5
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x0aa280a2)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 62.77.2f.00
[drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported
[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:02:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
[drm] nouveau 0000:02:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:02:00.0:   2: 0x00001261: type 0x61 idx 2 tag 0x07
[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01000323 00010034
[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 02011300 0000001e
[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 02022332 00020010
[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 0000000e 00000000
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD5C5
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD824
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xD826
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xD90B
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xDA5A
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xDABF
[drm] nouveau 0000:02:00.0: 0xDABF: Condition still not met after 20ms,
skipping following opcodes
[drm] nouveau 0000:02:00.0: 0xC1D2: parsing output script 0
[drm] nouveau 0000:02:00.0: 0xC38E: parsing output script 0
[TTM] Zone  kernel: Available graphics memory: 898512 kiB.
[drm] nouveau 0000:02:00.0: 256 MiB VRAM
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
nouveau 0000:02:00.0: firmware: requesting nouveau/nvaa.ctxprog
nouveau 0000:02:00.0: firmware: requesting nouveau/nvaa.ctxvals
[drm] nouveau 0000:02:00.0: Allocating FIFO number 1
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:02:00.0: Detected a LVDS output
[drm] nouveau 0000:02:00.0: Detected a DAC output
[drm] nouveau 0000:02:00.0: Detected a TMDS output
[drm] nouveau 0000:02:00.0: Detected a LVDS connector
[drm] nouveau 0000:02:00.0: Detected a VGA connector
[drm] nouveau 0000:02:00.0: Detected a DVI-D connector
[drm] nouveau 0000:02:00.0: allocated 1366x768 fb: 0x40210000, bo
ffff880068c85e00
Console: switching to colour frame buffer device 170x48
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0
[drm] nouveau 0000:02:00.0: Allocating FIFO number 2
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2
[drm] nouveau 0000:02:00.0: nouveau_channel_free: freeing fifo 2
[drm] LVDS-7: set mode 1366x768 1a
[drm] nouveau 0000:02:00.0: 0xC1D6: parsing output script 1
[drm] nouveau 0000:02:00.0: 0xC045: parsing clock script 0
[drm] nouveau 0000:02:00.0: 0xC1CD: parsing clock script 1

When kms is not enabled, xorg just hangs computer and sysrq keys doesn't
work,
so i can't attach log.
nouveau-drm version in my distro is 0.0.15_20091220.


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #32 from Josh Saddler <nightmorph at gentoo.org>  2010-02-15
02:00:20 PST ---
(In reply to comment #28)
> Can someone actually confirm it doesn't work with the current version
(with KMS
> enabled)?
It kinda works on my GeForce 8200. And it's kinda broken.

While KMS works perfectly, from the console to logging into my Xfce desktop,
performance is pretty bad. Nowhere *near* as bad as the proprietary driver is,
but it's still definitely stuttering and slow in places while just doing 2D
desktop work. I haven't tried 3D games yet.

I checked my Xorg logs, and this is what I see:

(EE) NOUVEAU(0): Error creating GPU channel: -16
(EE) NOUVEAU(0): Error initialising acceleration.  Falling back to NoAccel
(==) NOUVEAU(0): Backing store disabled
(==) NOUVEAU(0): Silken mouse enabled
(II) NOUVEAU(0): NVEnterVT is called.
(**) NOUVEAU(0): DPMS enabled
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0

By far it looks like the biggest errors are in the EE lines, where it says
it's
falling back to NoAccel. How can I fix that?

The other big problem is where it disables the backing store. Probably not good
for performance. And lastly, it tells me it's not capable of DRI/DRI2, even
though those are both installed and working correctly for my other (ATI) card.

I'm using:

kernel 2.6.33-rc7 (vanilla, straight from upstream)
mesa git (today's checkout)
libdrm git (today's checkout)
xorg-server 1.7.99.2
dri2proto 2.2
xf86-video-nouveau 0.0.15_pre20100213
nouveau-firmware 20091212


I will say that there is no documentation at all for which specific nVidia GPU
family my chipset belongs to -- only that it's "at least" nv50.
The 8200 is
just a downclocked 8300, and the interwebs indicate that the 8300 (GS) is an
nv86 chip. So that's what I put in my kernel for the extra firmware:
nv86.ctxprog/ctxvals. Maybe this is screwing things up?

If I should actually be using the nv50 firmware, then lemme know -- I can
recompile. I just thought that it was for the old 8800 cards.


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286


Maarten Maathuis <madman2003 at gmail.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |skeggsb at gmail.com




--- Comment #33 from Maarten Maathuis <madman2003 at gmail.com> 
2010-02-15 02:05:43 PST ---
Both the 8200 and 8300 are NVAA chips, they are not NV86. As far as i know
darktama is aware of what is causing the problem, but he hasn't gotten
around
to implementing it for nouveau. DRI2 doesn't work, because acceleration
isn't
working.


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #34 from Xavier <shiningxc at gmail.com>  2010-02-15 02:14:29
PST ---
(In reply to comment #32)
> 
> I will say that there is no documentation at all for which specific nVidia
GPU
> family my chipset belongs to -- only that it's "at least"
nv50. The 8200 is
> just a downclocked 8300, and the interwebs indicate that the 8300 (GS) is
an
> nv86 chip. So that's what I put in my kernel for the extra firmware:
> nv86.ctxprog/ctxvals. Maybe this is screwing things up?
> 
Just look at Stanislav last dmesg :
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x0aa280a2)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
...
[drm] nouveau 0000:02:00.0: 256 MiB VRAM
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
nouveau 0000:02:00.0: firmware: requesting nouveau/nvaa.ctxprog
nouveau 0000:02:00.0: firmware: requesting nouveau/nvaa.ctxvals

You can see its a nvaa card (0x0aa...) and that the two nvaa firmwares are
correctly loaded. So that's not the problem.
The problem is indeed the EE in xorg log :
(EE) NOUVEAU(0): Error creating GPU channel: -16
(EE) NOUVEAU(0): Error initialising acceleration.  Falling back to NoAccel


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #35 from Ben Skeggs <skeggsb at gmail.com>  2010-02-21
21:19:12 PST ---
There's a possibility NVAA is now fixed in current nouveau git.


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #36 from Josh Saddler <nightmorph at gentoo.org>  2010-03-21
16:15:04 PST ---
(In reply to comment #35)
> There's a possibility NVAA is now fixed in current nouveau git.
I think it is. I'm doing things on my Geforce 8200 I could never do before.

While I *very occasionally* see graphical corruption when rolling over Xfce
startmenus, or the "File Edit View Help" bars in application windows,
accel
seems to be working okay.

$ glxinfo

direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
OpenGL vendor string: nouveau
OpenGL renderer string: Gallium 0.4 on NVAA
OpenGL version string: 2.1 Mesa 7.9-devel
OpenGL shading language version string: 1.20

This is with kernel 2.6.34_rc2, 1-hour-old checkouts of
Mesa/libdrm/xf86-video-nouveau, and nouveau-firmware-20091212. Mesa is built
with gallium3d, since apparently that's required for nouveau these days. I
dunno if there are any other software versions or xorg.conf settings that would
be better, but the above stack is what works for me. Nice'n'stable; no
lockups.

No, I can't run ioQuake3-based games like Urban Terror at native 1440x900
with
all settings maxed (the way I can with my RadeonHD 4550 and xf86-video-ati),
but it is kinda playable. That's big progress.

So whatever ya'll have done in the last month, keep it up -- it's
yielding
amazing results. Thanks a bunch!


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286


Marcin Ko?cielnicki <koriakin at 0x04.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|ASSIGNED                    |RESOLVED
         Resolution|                            |FIXED




-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

http://bugs.freedesktop.org/show_bug.cgi?id=18286





--- Comment #37 from Xavier <shiningxc at gmail.com>  2010-03-21 16:34:36
PST ---
Just FYI, you no longer need firmware on 34, it was only needed for 33.
Thanks to... Marcin ! :)
http://cgit.freedesktop.org/nouveau/linux-2.6/commit/?id=266229a5779459314e2fda4281199fb1f308d668


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.