Lustre discuss - May 2012 - whamcloud rpms and snmp

All,
Not sure if it is in there, but are the prebuilt client rpms able to work with
snmp such that lustre mounts will show up in hrStorage (.1.3.6.1.2.1.25.2.3)?

Right now, it seems to only show Fixed and Network disks. I would think anything
with type lustre would show up as a Network disk, but nothing at all.

They do show up under the OID for dsk if I add them to the snmpd.conf file on
the client but it would be nice if they were part of the standard hrStorage OID.

 
Brian Andrus
ITACS/Research Computing
Naval Postgraduate School
Monterey, California
voice: 831-656-6238

There is Lustre SNMP support in the source, but it isn''t built by
default. I heard at LUG that there were some users of this code, so in theory it
is still working reasonably.

Cheers, Andreas

On 2012-05-21, at 12:05, "Andrus, Brian Contractor" <bdandrus at
nps.edu> wrote:
> All,
> Not sure if it is in there, but are the prebuilt client rpms able to work
with snmp such that lustre mounts will show up in hrStorage
(.1.3.6.1.2.1.25.2.3)?
> 
> Right now, it seems to only show Fixed and Network disks. I would think
anything with type lustre would show up as a Network disk, but nothing at all.
> 
> They do show up under the OID for dsk if I add them to the snmpd.conf file
on the client but it would be nice if they were part of the standard hrStorage
OID.
> 
> 
> Brian Andrus
> ITACS/Research Computing
> Naval Postgraduate School
> Monterey, California
> voice: 831-656-6238
> 
> 
> 
> _______________________________________________
> Lustre-discuss mailing list
> Lustre-discuss at lists.lustre.org
> http://lists.lustre.org/mailman/listinfo/lustre-discuss