Alfonso Pardo
2011-Jan-31 14:26 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
I need to compile my Centos 5.5 kernel with lustre, but when I do make in the patched kenel direcotroy I got the next error: fs/jbd/checkpoint.c: In function ???log_do_checkpoint???: fs/jbd/checkpoint.c:367: error: too few arguments to function ???__process_buffer??? make[2]: *** [fs/jbd/checkpoint.o] Error 1 make[1]: *** [fs/jbd] Error 2 make: *** [fs] Error 2 This is my system: * Centos 5.5 * Lustre source 1.8.4 * Kernel 2.6.18-194.32.1.el5 Brief: 1) rpm -i kernel-2.6.18-194.32.1.el5.src.rpm 2) rpm -i lustre-source-1.8.4-2.6.18_194.3.1.el5_lustre.1.8.4.x86_64.rpm 3) cd /usr/src/redhat/SPECS 4) rpmbuild -bp kernel-2.6.18-194.32.1.el5.spec 5) cd /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.x86_64/ 6) ln -s /usr/src/lustre-1.8.4/lustre/kernel_patches/series/2.6-rhel5.series ./series 7) ln -s /usr/src/lustre-1.8.4/lustre/kernel_patches/patches/ . 8) quitl push -av (no errors) 9) cp /boot/config-2.6.18-194.32.1.el5 .config 10) make oldconfig 11) make <<ERRORS>> Any suggest??? THANKS -- Alfonso Pardo D??az Unidad de Sistemas y Explotacion (USE) CETA-CIEMAT Calle Sola n?? 1, Trujillo (CACERES) Tel. 927 65 93 17 www.ceta-ciemat.es ---------------------------- Confidencialidad: Este mensaje y sus ficheros adjuntos se dirige exclusivamente a su destinatario y puede contener informaci?n privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la utilizaci?n, divulgaci?n y/o copia sin autorizaci?n est? prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente respondiendo al mensaje y proceda a su destrucci?n. Disclaimer: This message and its attached files is intended exclusively for its recipients and may contain confidential information. If you received this e-mail in error you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited and may be unlawful. In this case, please notify us by a reply and delete this email and its contents immediately. ----------------------------
Alfonso Pardo
2011-Feb-01 09:03 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
If I compile the kernel without kernel patchs It work fine, but when I apply the patchs (quilt push -av) I got the error. El lun, 31-01-2011 a las 15:26 +0100, Alfonso Pardo escribi?:> I need to compile my Centos 5.5 kernel with lustre, but when I do make > in the patched kenel direcotroy I got the next error: > > fs/jbd/checkpoint.c: In function ?log_do_checkpoint?: > fs/jbd/checkpoint.c:367: error: too few arguments to function > ?__process_buffer? > make[2]: *** [fs/jbd/checkpoint.o] Error 1 > make[1]: *** [fs/jbd] Error 2 > make: *** [fs] Error 2 > > This is my system: > > * Centos 5.5 > * Lustre source 1.8.4 > * Kernel 2.6.18-194.32.1.el5 > > Brief: > > 1) rpm -i kernel-2.6.18-194.32.1.el5.src.rpm > 2) rpm -i > lustre-source-1.8.4-2.6.18_194.3.1.el5_lustre.1.8.4.x86_64.rpm > 3) cd /usr/src/redhat/SPECS > 4) rpmbuild -bp kernel-2.6.18-194.32.1.el5.spec > 5) cd /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.x86_64/ > 6) ln > -s /usr/src/lustre-1.8.4/lustre/kernel_patches/series/2.6-rhel5.series ./series > 7) ln -s /usr/src/lustre-1.8.4/lustre/kernel_patches/patches/ . > 8) quitl push -av (no errors) > 9) cp /boot/config-2.6.18-194.32.1.el5 .config > 10) make oldconfig > 11) make <<ERRORS>> > > > Any suggest??? > > THANKS > > _______________________________________________ > Lustre-discuss mailing list > Lustre-discuss at lists.lustre.org > http://lists.lustre.org/mailman/listinfo/lustre-discuss-- Alfonso Pardo D?az Unidad de Sistemas y Explotacion (USE) CETA-CIEMAT Calle Sola n? 1, Trujillo (CACERES) Tel. 927 65 93 17 www.ceta-ciemat.es
Alfonso Pardo
2011-Feb-01 10:40 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
Hello again, I have patched my kernel with lustre 1.8.5 and work fine. Anybody known why work it with 1.8.5 and not work with 1.8.4? El mar, 01-02-2011 a las 10:03 +0100, Alfonso Pardo escribi?:> If I compile the kernel without kernel patchs It work fine, but when I > apply the patchs (quilt push -av) I got the error. > > > El lun, 31-01-2011 a las 15:26 +0100, Alfonso Pardo escribi?: > > I need to compile my Centos 5.5 kernel with lustre, but when I do make > > in the patched kenel direcotroy I got the next error: > > > > fs/jbd/checkpoint.c: In function ?log_do_checkpoint?: > > fs/jbd/checkpoint.c:367: error: too few arguments to function > > ?__process_buffer? > > make[2]: *** [fs/jbd/checkpoint.o] Error 1 > > make[1]: *** [fs/jbd] Error 2 > > make: *** [fs] Error 2 > > > > This is my system: > > > > * Centos 5.5 > > * Lustre source 1.8.4 > > * Kernel 2.6.18-194.32.1.el5 > > > > Brief: > > > > 1) rpm -i kernel-2.6.18-194.32.1.el5.src.rpm > > 2) rpm -i > > lustre-source-1.8.4-2.6.18_194.3.1.el5_lustre.1.8.4.x86_64.rpm > > 3) cd /usr/src/redhat/SPECS > > 4) rpmbuild -bp kernel-2.6.18-194.32.1.el5.spec > > 5) cd /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.x86_64/ > > 6) ln > > -s /usr/src/lustre-1.8.4/lustre/kernel_patches/series/2.6-rhel5.series ./series > > 7) ln -s /usr/src/lustre-1.8.4/lustre/kernel_patches/patches/ . > > 8) quitl push -av (no errors) > > 9) cp /boot/config-2.6.18-194.32.1.el5 .config > > 10) make oldconfig > > 11) make <<ERRORS>> > > > > > > Any suggest??? > > > > THANKS > > > > _______________________________________________ > > Lustre-discuss mailing list > > Lustre-discuss at lists.lustre.org > > http://lists.lustre.org/mailman/listinfo/lustre-discuss >-- Alfonso Pardo D?az Unidad de Sistemas y Explotacion (USE) CETA-CIEMAT Calle Sola n? 1, Trujillo (CACERES) Tel. 927 65 93 17 www.ceta-ciemat.es
Brian J. Murrell
2011-Feb-01 11:30 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
On Tue, 2011-02-01 at 11:40 +0100, Alfonso Pardo wrote:> Hello again, > > I have patched my kernel with lustre 1.8.5 and work fine. Anybody known > why work it with 1.8.5 and not work with 1.8.4?Because subsequent releases of Lustre have support for newer kernels. We can''t possibly have patches in a given release of Lustre for which a kernel was not yet available. As you have discovered, if you want to use the kernel you are trying to build for, you will need to upgrade to Lustre 1.8.5. Cheers, b. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: This is a digitally signed message part Url : http://lists.lustre.org/pipermail/lustre-discuss/attachments/20110201/5b333e07/attachment.bin
Alfonso Pardo
2011-Feb-03 08:35 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
But, I have used a kernel with subsequenced recomended by Oracle, I have downloaded the source kernel from Oracle lustre 1.8.4 web page. El mar, 01-02-2011 a las 06:30 -0500, Brian J. Murrell escribi?:> On Tue, 2011-02-01 at 11:40 +0100, Alfonso Pardo wrote: > > Hello again, > > > > I have patched my kernel with lustre 1.8.5 and work fine. Anybody known > > why work it with 1.8.5 and not work with 1.8.4? > > Because subsequent releases of Lustre have support for newer kernels. > We can''t possibly have patches in a given release of Lustre for which a > kernel was not yet available. > > As you have discovered, if you want to use the kernel you are trying to > build for, you will need to upgrade to Lustre 1.8.5. > > Cheers, > b. > > _______________________________________________ > Lustre-discuss mailing list > Lustre-discuss at lists.lustre.org > http://lists.lustre.org/mailman/listinfo/lustre-discuss-- Alfonso Pardo D?az Unidad de Sistemas y Explotacion (USE) CETA-CIEMAT Calle Sola n? 1, Trujillo (CACERES) Tel. 927 65 93 17 www.ceta-ciemat.es
Brian J. Murrell
2011-Feb-07 19:41 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
On Thu, 2011-02-03 at 09:35 +0100, Alfonso Pardo wrote:> But, I have used a kernel with subsequenced recomended by Oracle, I have > downloaded the source kernel from Oracle lustre 1.8.4 web page.But you are trying to patch it with Lustre 1.8.5. You cannot (usually) do that. If you use 1.8.4 you need to use the kernel that it was built to work with. If you use 1.8.5 you need to use the kernel that *it* was built to work with. You cannot (again, usually) mix and match the supported kernel from one Lustre release with the patches from another. b. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: This is a digitally signed message part Url : http://lists.lustre.org/pipermail/lustre-discuss/attachments/20110207/68858876/attachment.bin
Alfonso Pardo
2011-Feb-08 07:24 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
Sorry, may be I don''t explain so good. I am trying to compile lustre 1.8.4 with patches of lustre 1.8.4 with the kernel source code recomended by oracle (2.6.18-194.3.1.0.1.el5) in centos 5.5. El lun, 07-02-2011 a las 14:41 -0500, Brian J. Murrell escribi?:> On Thu, 2011-02-03 at 09:35 +0100, Alfonso Pardo wrote: > > But, I have used a kernel with subsequenced recomended by Oracle, I have > > downloaded the source kernel from Oracle lustre 1.8.4 web page. > > But you are trying to patch it with Lustre 1.8.5. You cannot (usually) > do that. If you use 1.8.4 you need to use the kernel that it was built > to work with. If you use 1.8.5 you need to use the kernel that *it* was > built to work with. You cannot (again, usually) mix and match the > supported kernel from one Lustre release with the patches from another. > > b. > > _______________________________________________ > Lustre-discuss mailing list > Lustre-discuss at lists.lustre.org > http://lists.lustre.org/mailman/listinfo/lustre-discuss-- Alfonso Pardo D?az Unidad de Sistemas y Explotacion (USE) CETA-CIEMAT Calle Sola n? 1, Trujillo (CACERES) Tel. 927 65 93 17 www.ceta-ciemat.es
Alfonso Pardo
2011-Feb-08 07:39 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
upps,I don''t finished...... Sorry, may be I don''t explain so good. I am trying to compile lustre 1.8.4 with patches of lustre 1.8.4 with the kernel source code recomended by oracle (2.6.18-194.3.1.0.1.el5) in centos 5.5. When I try to compile I get a error. But If I try to compile same kernel with lustre 1.8.5 with patches of 1.8.5 in centos 5.5 it work, but I need to use 1.8.4 becouse all my system has 1.8.4 installed El mar, 08-02-2011 a las 08:24 +0100, Alfonso Pardo escribi?:> Sorry, may be I don''t explain so good. I am trying to compile lustre > 1.8.4 with patches of lustre 1.8.4 with the kernel source code > recomended by oracle (2.6.18-194.3.1.0.1.el5) in centos 5.5. > > > > > > El lun, 07-02-2011 a las 14:41 -0500, Brian J. Murrell escribi?: > > On Thu, 2011-02-03 at 09:35 +0100, Alfonso Pardo wrote: > > > But, I have used a kernel with subsequenced recomended by Oracle, I have > > > downloaded the source kernel from Oracle lustre 1.8.4 web page. > > > > But you are trying to patch it with Lustre 1.8.5. You cannot (usually) > > do that. If you use 1.8.4 you need to use the kernel that it was built > > to work with. If you use 1.8.5 you need to use the kernel that *it* was > > built to work with. You cannot (again, usually) mix and match the > > supported kernel from one Lustre release with the patches from another. > > > > b. > > > > _______________________________________________ > > Lustre-discuss mailing list > > Lustre-discuss at lists.lustre.org > > http://lists.lustre.org/mailman/listinfo/lustre-discuss >-- Alfonso Pardo D?az Unidad de Sistemas y Explotacion (USE) CETA-CIEMAT Calle Sola n? 1, Trujillo (CACERES) Tel. 927 65 93 17 www.ceta-ciemat.es
Tina Friedrich
2011-Feb-08 09:59 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
You do not need to run the same version across all your systems. It should be fine running a mixture of 1.8.4 and 1.8.5. Not sure if your Centos machine is supposed to be a server or client, but assume client? (As I would assume the file servers would be on the same OS release.) In which case it would certainly not be a problem. We ran 1.8.2 (or so) clients against 1.6.7 servers for quite a while due to some hardware coming with a kernel that 1.6 could not be compiled for; and we now have the first 1.8.5 client (runing 1.8.3 servers), for the same reason. Tina On 08/02/11 07:39, Alfonso Pardo wrote:> upps,I don''t finished...... > > Sorry, may be I don''t explain so good. I am trying to compile lustre > 1.8.4 with patches of lustre 1.8.4 with the kernel source code > recomended by oracle (2.6.18-194.3.1.0.1.el5) in centos 5.5. When I try > to compile I get a error. > > But If I try to compile same kernel with lustre 1.8.5 with patches of > 1.8.5 in centos 5.5 it work, but I need to use 1.8.4 becouse all my > system has 1.8.4 installed > > > > > > El mar, 08-02-2011 a las 08:24 +0100, Alfonso Pardo escribi?: >> Sorry, may be I don''t explain so good. I am trying to compile lustre >> 1.8.4 with patches of lustre 1.8.4 with the kernel source code >> recomended by oracle (2.6.18-194.3.1.0.1.el5) in centos 5.5. >> >> >> >> >> >> El lun, 07-02-2011 a las 14:41 -0500, Brian J. Murrell escribi?: >>> On Thu, 2011-02-03 at 09:35 +0100, Alfonso Pardo wrote: >>>> But, I have used a kernel with subsequenced recomended by Oracle, I have >>>> downloaded the source kernel from Oracle lustre 1.8.4 web page. >>> >>> But you are trying to patch it with Lustre 1.8.5. You cannot (usually) >>> do that. If you use 1.8.4 you need to use the kernel that it was built >>> to work with. If you use 1.8.5 you need to use the kernel that *it* was >>> built to work with. You cannot (again, usually) mix and match the >>> supported kernel from one Lustre release with the patches from another. >>> >>> b. >>> >>> _______________________________________________ >>> Lustre-discuss mailing list >>> Lustre-discuss at lists.lustre.org >>> http://lists.lustre.org/mailman/listinfo/lustre-discuss >> >-- Tina Friedrich, Computer Systems Administrator, Diamond Light Source Ltd Diamond House, Harwell Science and Innovation Campus - 01235 77 8442 -- This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail. Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message. Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
Wojciech Turek
2011-Feb-08 10:23 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
Hi Alfonso, looking at 1.8.4 download page I can see that originally it was build against 2.6.18-194.3.1.el5 kernel whereas you are trying to build against * * 2.6.18-194.32.1.el5, so the difference maybe enough to break build process. Anyway as Tina said you can run mix of 1.8.4 and 1.8.5 clients. Also if you building a Lustre client you don''t have to patch the kernel. In case you are building lustre server I would recommend to use Lustre 1.8.5 and kernel which comes with it. You can run different Lustre version on the clients and servers (for example 1.8.5 servers and 1.8.4 clients or mix of 1.8.4 and 1.8.5 clients) as long as all the Lustre servers are running the same version. Best regards, Wojciech On 8 February 2011 07:39, Alfonso Pardo <alfonso.pardo at ciemat.es> wrote:> upps,I don''t finished...... > > Sorry, may be I don''t explain so good. I am trying to compile lustre > 1.8.4 with patches of lustre 1.8.4 with the kernel source code > recomended by oracle (2.6.18-194.3.1.0.1.el5) in centos 5.5. When I try > to compile I get a error. > > But If I try to compile same kernel with lustre 1.8.5 with patches of > 1.8.5 in centos 5.5 it work, but I need to use 1.8.4 becouse all my > system has 1.8.4 installed > > > > > > El mar, 08-02-2011 a las 08:24 +0100, Alfonso Pardo escribi?: > > Sorry, may be I don''t explain so good. I am trying to compile lustre > > 1.8.4 with patches of lustre 1.8.4 with the kernel source code > > recomended by oracle (2.6.18-194.3.1.0.1.el5) in centos 5.5. > > > > > > > > > > > > El lun, 07-02-2011 a las 14:41 -0500, Brian J. Murrell escribi?: > > > On Thu, 2011-02-03 at 09:35 +0100, Alfonso Pardo wrote: > > > > But, I have used a kernel with subsequenced recomended by Oracle, I > have > > > > downloaded the source kernel from Oracle lustre 1.8.4 web page. > > > > > > But you are trying to patch it with Lustre 1.8.5. You cannot (usually) > > > do that. If you use 1.8.4 you need to use the kernel that it was built > > > to work with. If you use 1.8.5 you need to use the kernel that *it* > was > > > built to work with. You cannot (again, usually) mix and match the > > > supported kernel from one Lustre release with the patches from another. > > > > > > b. > > > > > > _______________________________________________ > > > Lustre-discuss mailing list > > > Lustre-discuss at lists.lustre.org > > > http://lists.lustre.org/mailman/listinfo/lustre-discuss > > > > -- > Alfonso Pardo D?az > > Unidad de Sistemas y Explotacion (USE) > CETA-CIEMAT > Calle Sola n? 1, Trujillo (CACERES) > Tel. 927 65 93 17 > www.ceta-ciemat.es > > _______________________________________________ > Lustre-discuss mailing list > Lustre-discuss at lists.lustre.org > http://lists.lustre.org/mailman/listinfo/lustre-discuss >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lustre.org/pipermail/lustre-discuss/attachments/20110208/e8acd483/attachment-0001.html
Alfonso Pardo
2011-Feb-08 11:02 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
yes, at fist moments I had compiling with 2.6.18-194.32.1.el5 but now i am triyin with 2.6.18-194.3.1.el5 but same error. I understand its possible to use clients with 1.8.4 and servers with 1.8.5, but my client demand me 1.8.4, becouse he doubts of recents versions. To summarize LUSTRE 1.8.4 KERNEL 2.6.18-194.3.1.el5 SSOO CENTOS 5.5 LUSTRE PATH 1.8.4 Error after path (quilt ok), make oldconfig and make: CC mm/filemap.o mm/filemap.c: In function ?set_page_constant?: mm/filemap.c:594: error: ?SWAP_FAIL? undeclared (first use in this function) mm/filemap.c:594: error: (Each undeclared identifier is reported only once mm/filemap.c:594: error: for each function it appears in.) mm/filemap.c:604: error: implicit declaration of function ?try_to_unmap? mm/filemap.c:604: error: ?SWAP_SUCCESS? undeclared (first use in this function) make[1]: *** [mm/filemap.o] Error 1 make: *** [mm] Error 2 El mar, 08-02-2011 a las 10:23 +0000, Wojciech Turek escribi?:> Hi Alfonso, > > looking at 1.8.4 download page I can see that originally it was build > against 2.6.18-194.3.1.el5 kernel whereas you are trying to build > against 2.6.18-194.32.1.el5, so the difference maybe enough to break > build process. Anyway as Tina said you can run mix of 1.8.4 and 1.8.5 > clients. Also if you building a Lustre client you don''t have to patch > the kernel. > In case you are building lustre server I would recommend to use Lustre > 1.8.5 and kernel which comes with it. You can run different Lustre > version on the clients and servers (for example 1.8.5 servers and > 1.8.4 clients or mix of 1.8.4 and 1.8.5 clients) as long as all the > Lustre servers are running the same version. > > Best regards, > > Wojciech > > On 8 February 2011 07:39, Alfonso Pardo <alfonso.pardo at ciemat.es> > wrote: > upps,I don''t finished...... > > Sorry, may be I don''t explain so good. I am trying to compile > lustre > 1.8.4 with patches of lustre 1.8.4 with the kernel source code > > recomended by oracle (2.6.18-194.3.1.0.1.el5) in centos 5.5. > When I try > to compile I get a error. > > But If I try to compile same kernel with lustre 1.8.5 with > patches of > 1.8.5 in centos 5.5 it work, but I need to use 1.8.4 becouse > all my > system has 1.8.4 installed > > > > > > El mar, 08-02-2011 a las 08:24 +0100, Alfonso Pardo escribi?: > > > Sorry, may be I don''t explain so good. I am trying to > compile lustre > > 1.8.4 with patches of lustre 1.8.4 with the kernel source > code > > recomended by oracle (2.6.18-194.3.1.0.1.el5) in centos 5.5. > > > > > > > > > > > > El lun, 07-02-2011 a las 14:41 -0500, Brian J. Murrell > escribi?: > > > On Thu, 2011-02-03 at 09:35 +0100, Alfonso Pardo wrote: > > > > But, I have used a kernel with subsequenced recomended > by Oracle, I have > > > > downloaded the source kernel from Oracle lustre 1.8.4 > web page. > > > > > > But you are trying to patch it with Lustre 1.8.5. You > cannot (usually) > > > do that. If you use 1.8.4 you need to use the kernel that > it was built > > > to work with. If you use 1.8.5 you need to use the kernel > that *it* was > > > built to work with. You cannot (again, usually) mix and > match the > > > supported kernel from one Lustre release with the patches > from another. > > > > > > b. > > > > > > _______________________________________________ > > > Lustre-discuss mailing list > > > Lustre-discuss at lists.lustre.org > > > http://lists.lustre.org/mailman/listinfo/lustre-discuss > > > > -- > Alfonso Pardo D?az > > Unidad de Sistemas y Explotacion (USE) > CETA-CIEMAT > Calle Sola n? 1, Trujillo (CACERES) > Tel. 927 65 93 17 > www.ceta-ciemat.es > > _______________________________________________ > Lustre-discuss mailing list > Lustre-discuss at lists.lustre.org > http://lists.lustre.org/mailman/listinfo/lustre-discuss > > >-- Alfonso Pardo D?az Unidad de Sistemas y Explotacion (USE) CETA-CIEMAT Calle Sola n? 1, Trujillo (CACERES) Tel. 927 65 93 17 www.ceta-ciemat.es
Wojciech Turek
2011-Feb-08 11:13 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
So you are building a Lustre server? If the answer is yes, why not to use already patched kernel for 1.8.4 which is available for download? On 8 February 2011 11:02, Alfonso Pardo <alfonso.pardo at ciemat.es> wrote:> yes, at fist moments I had compiling with 2.6.18-194.32.1.el5 but now i > am triyin with 2.6.18-194.3.1.el5 but same error. > > I understand its possible to use clients with 1.8.4 and servers with > 1.8.5, but my client demand me 1.8.4, becouse he doubts of recents > versions. > > To summarize > > LUSTRE 1.8.4 > KERNEL 2.6.18-194.3.1.el5 > SSOO CENTOS 5.5 > LUSTRE PATH 1.8.4 > > Error after path (quilt ok), make oldconfig and make: > > CC mm/filemap.o > mm/filemap.c: In function ?set_page_constant?: > mm/filemap.c:594: error: ?SWAP_FAIL? undeclared (first use in this > function) > mm/filemap.c:594: error: (Each undeclared identifier is reported only > once > mm/filemap.c:594: error: for each function it appears in.) > mm/filemap.c:604: error: implicit declaration of function ?try_to_unmap? > mm/filemap.c:604: error: ?SWAP_SUCCESS? undeclared (first use in this > function) > make[1]: *** [mm/filemap.o] Error 1 > make: *** [mm] Error 2 > > El mar, 08-02-2011 a las 10:23 +0000, Wojciech Turek escribi?: > > Hi Alfonso, > > > > looking at 1.8.4 download page I can see that originally it was build > > against 2.6.18-194.3.1.el5 kernel whereas you are trying to build > > against 2.6.18-194.32.1.el5, so the difference maybe enough to break > > build process. Anyway as Tina said you can run mix of 1.8.4 and 1.8.5 > > clients. Also if you building a Lustre client you don''t have to patch > > the kernel. > > In case you are building lustre server I would recommend to use Lustre > > 1.8.5 and kernel which comes with it. You can run different Lustre > > version on the clients and servers (for example 1.8.5 servers and > > 1.8.4 clients or mix of 1.8.4 and 1.8.5 clients) as long as all the > > Lustre servers are running the same version. > > > > Best regards, > > > > Wojciech > > > > On 8 February 2011 07:39, Alfonso Pardo <alfonso.pardo at ciemat.es> > > wrote: > > upps,I don''t finished...... > > > > Sorry, may be I don''t explain so good. I am trying to compile > > lustre > > 1.8.4 with patches of lustre 1.8.4 with the kernel source code > > > > recomended by oracle (2.6.18-194.3.1.0.1.el5) in centos 5.5. > > When I try > > to compile I get a error. > > > > But If I try to compile same kernel with lustre 1.8.5 with > > patches of > > 1.8.5 in centos 5.5 it work, but I need to use 1.8.4 becouse > > all my > > system has 1.8.4 installed > > > > > > > > > > > > El mar, 08-02-2011 a las 08:24 +0100, Alfonso Pardo escribi?: > > > > > Sorry, may be I don''t explain so good. I am trying to > > compile lustre > > > 1.8.4 with patches of lustre 1.8.4 with the kernel source > > code > > > recomended by oracle (2.6.18-194.3.1.0.1.el5) in centos 5.5. > > > > > > > > > > > > > > > > > > El lun, 07-02-2011 a las 14:41 -0500, Brian J. Murrell > > escribi?: > > > > On Thu, 2011-02-03 at 09:35 +0100, Alfonso Pardo wrote: > > > > > But, I have used a kernel with subsequenced recomended > > by Oracle, I have > > > > > downloaded the source kernel from Oracle lustre 1.8.4 > > web page. > > > > > > > > But you are trying to patch it with Lustre 1.8.5. You > > cannot (usually) > > > > do that. If you use 1.8.4 you need to use the kernel that > > it was built > > > > to work with. If you use 1.8.5 you need to use the kernel > > that *it* was > > > > built to work with. You cannot (again, usually) mix and > > match the > > > > supported kernel from one Lustre release with the patches > > from another. > > > > > > > > b. > > > > > > > > _______________________________________________ > > > > Lustre-discuss mailing list > > > > Lustre-discuss at lists.lustre.org > > > > http://lists.lustre.org/mailman/listinfo/lustre-discuss > > > > > > > -- > > Alfonso Pardo D?az > > > > Unidad de Sistemas y Explotacion (USE) > > CETA-CIEMAT > > Calle Sola n? 1, Trujillo (CACERES) > > Tel. 927 65 93 17 > > www.ceta-ciemat.es > > > > _______________________________________________ > > Lustre-discuss mailing list > > Lustre-discuss at lists.lustre.org > > http://lists.lustre.org/mailman/listinfo/lustre-discuss > > > > > > > > -- > Alfonso Pardo D?az > > Unidad de Sistemas y Explotacion (USE) > CETA-CIEMAT > Calle Sola n? 1, Trujillo (CACERES) > Tel. 927 65 93 17 > www.ceta-ciemat.es > >-- Wojciech Turek Senior System Architect High Performance Computing Service University of Cambridge Email: wjt27 at cam.ac.uk Tel: (+)44 1223 763517 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lustre.org/pipermail/lustre-discuss/attachments/20110208/64e709a7/attachment.html
Alfonso Pardo
2011-Feb-08 12:25 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
yes, i am building a lustre server. I am compiling because the patched kernel 1.8.4 have a bug with the bonding mode 3 and the network interfaces e1000e El mar, 08-02-2011 a las 11:13 +0000, Wojciech Turek escribi?:> So you are building a Lustre server? If the answer is yes, why not to > use already patched kernel for 1.8.4 which is available for download? > > > On 8 February 2011 11:02, Alfonso Pardo <alfonso.pardo at ciemat.es> > wrote: > yes, at fist moments I had compiling with 2.6.18-194.32.1.el5 > but now i > am triyin with 2.6.18-194.3.1.el5 but same error. > > I understand its possible to use clients with 1.8.4 and > servers with > 1.8.5, but my client demand me 1.8.4, becouse he doubts of > recents > versions. > > To summarize > > LUSTRE 1.8.4 > KERNEL 2.6.18-194.3.1.el5 > SSOO CENTOS 5.5 > LUSTRE PATH 1.8.4 > > Error after path (quilt ok), make oldconfig and make: > > CC mm/filemap.o > mm/filemap.c: In function ?set_page_constant?: > mm/filemap.c:594: error: ?SWAP_FAIL? undeclared (first use in > this > function) > mm/filemap.c:594: error: (Each undeclared identifier is > reported only > once > mm/filemap.c:594: error: for each function it appears in.) > mm/filemap.c:604: error: implicit declaration of function > ?try_to_unmap? > mm/filemap.c:604: error: ?SWAP_SUCCESS? undeclared (first use > in this > function) > make[1]: *** [mm/filemap.o] Error 1 > make: *** [mm] Error 2 > > El mar, 08-02-2011 a las 10:23 +0000, Wojciech Turek escribi?: > > > Hi Alfonso, > > > > looking at 1.8.4 download page I can see that originally it > was build > > against 2.6.18-194.3.1.el5 kernel whereas you are trying to > build > > against 2.6.18-194.32.1.el5, so the difference maybe enough > to break > > build process. Anyway as Tina said you can run mix of 1.8.4 > and 1.8.5 > > clients. Also if you building a Lustre client you don''t have > to patch > > the kernel. > > In case you are building lustre server I would recommend to > use Lustre > > 1.8.5 and kernel which comes with it. You can run different > Lustre > > version on the clients and servers (for example 1.8.5 > servers and > > 1.8.4 clients or mix of 1.8.4 and 1.8.5 clients) as long as > all the > > Lustre servers are running the same version. > > > > Best regards, > > > > Wojciech > > > > On 8 February 2011 07:39, Alfonso Pardo > <alfonso.pardo at ciemat.es> > > wrote: > > upps,I don''t finished...... > > > > Sorry, may be I don''t explain so good. I am trying > to compile > > lustre > > 1.8.4 with patches of lustre 1.8.4 with the kernel > source code > > > > recomended by oracle (2.6.18-194.3.1.0.1.el5) in > centos 5.5. > > When I try > > to compile I get a error. > > > > But If I try to compile same kernel with lustre > 1.8.5 with > > patches of > > 1.8.5 in centos 5.5 it work, but I need to use 1.8.4 > becouse > > all my > > system has 1.8.4 installed > > > > > > > > > > > > El mar, 08-02-2011 a las 08:24 +0100, Alfonso Pardo > escribi?: > > > > > Sorry, may be I don''t explain so good. I am trying > to > > compile lustre > > > 1.8.4 with patches of lustre 1.8.4 with the kernel > source > > code > > > recomended by oracle (2.6.18-194.3.1.0.1.el5) in > centos 5.5. > > > > > > > > > > > > > > > > > > El lun, 07-02-2011 a las 14:41 -0500, Brian J. > Murrell > > escribi?: > > > > On Thu, 2011-02-03 at 09:35 +0100, Alfonso Pardo > wrote: > > > > > But, I have used a kernel with subsequenced > recomended > > by Oracle, I have > > > > > downloaded the source kernel from Oracle > lustre 1.8.4 > > web page. > > > > > > > > But you are trying to patch it with Lustre > 1.8.5. You > > cannot (usually) > > > > do that. If you use 1.8.4 you need to use the > kernel that > > it was built > > > > to work with. If you use 1.8.5 you need to use > the kernel > > that *it* was > > > > built to work with. You cannot (again, usually) > mix and > > match the > > > > supported kernel from one Lustre release with > the patches > > from another. > > > > > > > > b. > > > > > > > > _______________________________________________ > > > > Lustre-discuss mailing list > > > > Lustre-discuss at lists.lustre.org > > > > > http://lists.lustre.org/mailman/listinfo/lustre-discuss > > > > > > > -- > > Alfonso Pardo D?az > > > > Unidad de Sistemas y Explotacion (USE) > > CETA-CIEMAT > > Calle Sola n? 1, Trujillo (CACERES) > > Tel. 927 65 93 17 > > www.ceta-ciemat.es > > > > _______________________________________________ > > Lustre-discuss mailing list > > Lustre-discuss at lists.lustre.org > > > http://lists.lustre.org/mailman/listinfo/lustre-discuss > > > > > > > > > -- > > Alfonso Pardo D?az > > Unidad de Sistemas y Explotacion (USE) > CETA-CIEMAT > Calle Sola n? 1, Trujillo (CACERES) > Tel. 927 65 93 17 > www.ceta-ciemat.es > > > > > > -- > Wojciech Turek > > Senior System Architect > > High Performance Computing Service > University of Cambridge > Email: wjt27 at cam.ac.uk > Tel: (+)44 1223 763517-- Alfonso Pardo D?az Unidad de Sistemas y Explotacion (USE) CETA-CIEMAT Calle Sola n? 1, Trujillo (CACERES) Tel. 927 65 93 17 www.ceta-ciemat.es
Marceliano Marrón
2011-Feb-11 13:09 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
Hi Alfonso,
I''ve tried to compile the kernel like your environment (in our center
we
have a system like this..) and I think it was all fine, I generate kernel +
lustre{modules,ldiskfs, source, tests} I used the kernel unpatched from
Lustre Downloads (2.6.18-194.3.1).
I did the steps that lustre manual recommends:
a) untar lustre source and linux kernel source
in linux source directory:
b) link from lustre source series and patches
c) quit push -av
d) configure kernel ( make oldconfig, make menuconfig and several
configurations )
and after that, create the rpms from lustre source and linux tree source
directory.
The error shows a variable that isn''t recognized (is defined in
include/linux/rmap.h). A file permission problem, perhaps? What compiler and
libraries do you use?
If you want, i can give you all the steps that I followed..
Regards,
2011/2/8 Alfonso Pardo <alfonso.pardo at ciemat.es>
> yes, i am building a lustre server. I am compiling because the patched
> kernel 1.8.4 have a bug with the bonding mode 3 and the network
> interfaces e1000e
>
>
>
>
> El mar, 08-02-2011 a las 11:13 +0000, Wojciech Turek escribi?:
> > So you are building a Lustre server? If the answer is yes, why not to
> > use already patched kernel for 1.8.4 which is available for download?
> >
> >
> > On 8 February 2011 11:02, Alfonso Pardo <alfonso.pardo at
ciemat.es>
> > wrote:
> > yes, at fist moments I had compiling with 2.6.18-194.32.1.el5
> > but now i
> > am triyin with 2.6.18-194.3.1.el5 but same error.
> >
> > I understand its possible to use clients with 1.8.4 and
> > servers with
> > 1.8.5, but my client demand me 1.8.4, becouse he doubts of
> > recents
> > versions.
> >
> > To summarize
> >
> > LUSTRE 1.8.4
> > KERNEL 2.6.18-194.3.1.el5
> > SSOO CENTOS 5.5
> > LUSTRE PATH 1.8.4
> >
> > Error after path (quilt ok), make oldconfig and make:
> >
> > CC mm/filemap.o
> > mm/filemap.c: In function ?set_page_constant?:
> > mm/filemap.c:594: error: ?SWAP_FAIL? undeclared (first use in
> > this
> > function)
> > mm/filemap.c:594: error: (Each undeclared identifier is
> > reported only
> > once
> > mm/filemap.c:594: error: for each function it appears in.)
> > mm/filemap.c:604: error: implicit declaration of function
> > ?try_to_unmap?
> > mm/filemap.c:604: error: ?SWAP_SUCCESS? undeclared (first use
> > in this
> > function)
> > make[1]: *** [mm/filemap.o] Error 1
> > make: *** [mm] Error 2
> >
> > El mar, 08-02-2011 a las 10:23 +0000, Wojciech Turek escribi?:
> >
> > > Hi Alfonso,
> > >
> > > looking at 1.8.4 download page I can see that originally
it
> > was build
> > > against 2.6.18-194.3.1.el5 kernel whereas you are trying
to
> > build
> > > against 2.6.18-194.32.1.el5, so the difference maybe
enough
> > to break
> > > build process. Anyway as Tina said you can run mix of
1.8.4
> > and 1.8.5
> > > clients. Also if you building a Lustre client you
don''t have
> > to patch
> > > the kernel.
> > > In case you are building lustre server I would recommend
to
> > use Lustre
> > > 1.8.5 and kernel which comes with it. You can run
different
> > Lustre
> > > version on the clients and servers (for example 1.8.5
> > servers and
> > > 1.8.4 clients or mix of 1.8.4 and 1.8.5 clients) as long
as
> > all the
> > > Lustre servers are running the same version.
> > >
> > > Best regards,
> > >
> > > Wojciech
> > >
> > > On 8 February 2011 07:39, Alfonso Pardo
> > <alfonso.pardo at ciemat.es>
> > > wrote:
> > > upps,I don''t finished......
> > >
> > > Sorry, may be I don''t explain so good. I
am trying
> > to compile
> > > lustre
> > > 1.8.4 with patches of lustre 1.8.4 with the
kernel
> > source code
> > >
> > > recomended by oracle (2.6.18-194.3.1.0.1.el5) in
> > centos 5.5.
> > > When I try
> > > to compile I get a error.
> > >
> > > But If I try to compile same kernel with lustre
> > 1.8.5 with
> > > patches of
> > > 1.8.5 in centos 5.5 it work, but I need to use
1.8.4
> > becouse
> > > all my
> > > system has 1.8.4 installed
> > >
> > >
> > >
> > >
> > >
> > > El mar, 08-02-2011 a las 08:24 +0100, Alfonso
Pardo
> > escribi?:
> > >
> > > > Sorry, may be I don''t explain so
good. I am trying
> > to
> > > compile lustre
> > > > 1.8.4 with patches of lustre 1.8.4 with the
kernel
> > source
> > > code
> > > > recomended by oracle
(2.6.18-194.3.1.0.1.el5) in
> > centos 5.5.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > El lun, 07-02-2011 a las 14:41 -0500, Brian
J.
> > Murrell
> > > escribi?:
> > > > > On Thu, 2011-02-03 at 09:35 +0100,
Alfonso Pardo
> > wrote:
> > > > > > But, I have used a kernel with
subsequenced
> > recomended
> > > by Oracle, I have
> > > > > > downloaded the source kernel from
Oracle
> > lustre 1.8.4
> > > web page.
> > > > >
> > > > > But you are trying to patch it with
Lustre
> > 1.8.5. You
> > > cannot (usually)
> > > > > do that. If you use 1.8.4 you need to
use the
> > kernel that
> > > it was built
> > > > > to work with. If you use 1.8.5 you
need to use
> > the kernel
> > > that *it* was
> > > > > built to work with. You cannot (again,
usually)
> > mix and
> > > match the
> > > > > supported kernel from one Lustre
release with
> > the patches
> > > from another.
> > > > >
> > > > > b.
> > > > >
> > > > >
_______________________________________________
> > > > > Lustre-discuss mailing list
> > > > > Lustre-discuss at lists.lustre.org
> > > > >
> > http://lists.lustre.org/mailman/listinfo/lustre-discuss
> > > >
> > >
> > > --
> > > Alfonso Pardo D?az
> > >
> > > Unidad de Sistemas y Explotacion (USE)
> > > CETA-CIEMAT
> > > Calle Sola n? 1, Trujillo (CACERES)
> > > Tel. 927 65 93 17
> > > www.ceta-ciemat.es
> > >
> > > _______________________________________________
> > > Lustre-discuss mailing list
> > > Lustre-discuss at lists.lustre.org
> > >
> > http://lists.lustre.org/mailman/listinfo/lustre-discuss
> > >
> > >
> > >
> >
> >
> > --
> >
> > Alfonso Pardo D?az
> >
> > Unidad de Sistemas y Explotacion (USE)
> > CETA-CIEMAT
> > Calle Sola n? 1, Trujillo (CACERES)
> > Tel. 927 65 93 17
> > www.ceta-ciemat.es
> >
> >
> >
> >
> >
> > --
> > Wojciech Turek
> >
> > Senior System Architect
> >
> > High Performance Computing Service
> > University of Cambridge
> > Email: wjt27 at cam.ac.uk
> > Tel: (+)44 1223 763517
>
> --
> Alfonso Pardo D?az
>
> Unidad de Sistemas y Explotacion (USE)
> CETA-CIEMAT
> Calle Sola n? 1, Trujillo (CACERES)
> Tel. 927 65 93 17
> www.ceta-ciemat.es
>
> _______________________________________________
> Lustre-discuss mailing list
> Lustre-discuss at lists.lustre.org
> http://lists.lustre.org/mailman/listinfo/lustre-discuss
>
--
Marceliano Marr?n B?ez
Departamento de Sistemas y Supercomputaci?n
Centro Inform?tico Cient?fico de Andaluc?a (CICA)
Avda. Reina Mercedes s/n - 41012 - Sevilla (Spain)
Tfno.: +34 955 056 600 / FAX: +34 955 056 607
Consejer?a de Econom?a, Innovaci?n y Ciencia
Junta de Andaluc?a
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.lustre.org/pipermail/lustre-discuss/attachments/20110211/1fdbff0d/attachment-0001.html
Wojciech Turek
2011-Feb-11 16:42 UTC
[Lustre-discuss] Compile lustre 1.8.4 errors+centos 5.5
If you just need to build new modules you could do that without rebuilding a whole kernel. I think that if you apply patches to the modules that have a bug and rebuild that modules it should work. On 8 February 2011 12:25, Alfonso Pardo <alfonso.pardo at ciemat.es> wrote:> yes, i am building a lustre server. I am compiling because the patched > kernel 1.8.4 have a bug with the bonding mode 3 and the network > interfaces e1000e > > > > > El mar, 08-02-2011 a las 11:13 +0000, Wojciech Turek escribi?: > > So you are building a Lustre server? If the answer is yes, why not to > > use already patched kernel for 1.8.4 which is available for download? > > > > > > On 8 February 2011 11:02, Alfonso Pardo <alfonso.pardo at ciemat.es> > > wrote: > > yes, at fist moments I had compiling with 2.6.18-194.32.1.el5 > > but now i > > am triyin with 2.6.18-194.3.1.el5 but same error. > > > > I understand its possible to use clients with 1.8.4 and > > servers with > > 1.8.5, but my client demand me 1.8.4, becouse he doubts of > > recents > > versions. > > > > To summarize > > > > LUSTRE 1.8.4 > > KERNEL 2.6.18-194.3.1.el5 > > SSOO CENTOS 5.5 > > LUSTRE PATH 1.8.4 > > > > Error after path (quilt ok), make oldconfig and make: > > > > CC mm/filemap.o > > mm/filemap.c: In function ?set_page_constant?: > > mm/filemap.c:594: error: ?SWAP_FAIL? undeclared (first use in > > this > > function) > > mm/filemap.c:594: error: (Each undeclared identifier is > > reported only > > once > > mm/filemap.c:594: error: for each function it appears in.) > > mm/filemap.c:604: error: implicit declaration of function > > ?try_to_unmap? > > mm/filemap.c:604: error: ?SWAP_SUCCESS? undeclared (first use > > in this > > function) > > make[1]: *** [mm/filemap.o] Error 1 > > make: *** [mm] Error 2 > > > > El mar, 08-02-2011 a las 10:23 +0000, Wojciech Turek escribi?: > > > > > Hi Alfonso, > > > > > > looking at 1.8.4 download page I can see that originally it > > was build > > > against 2.6.18-194.3.1.el5 kernel whereas you are trying to > > build > > > against 2.6.18-194.32.1.el5, so the difference maybe enough > > to break > > > build process. Anyway as Tina said you can run mix of 1.8.4 > > and 1.8.5 > > > clients. Also if you building a Lustre client you don''t have > > to patch > > > the kernel. > > > In case you are building lustre server I would recommend to > > use Lustre > > > 1.8.5 and kernel which comes with it. You can run different > > Lustre > > > version on the clients and servers (for example 1.8.5 > > servers and > > > 1.8.4 clients or mix of 1.8.4 and 1.8.5 clients) as long as > > all the > > > Lustre servers are running the same version. > > > > > > Best regards, > > > > > > Wojciech > > > > > > On 8 February 2011 07:39, Alfonso Pardo > > <alfonso.pardo at ciemat.es> > > > wrote: > > > upps,I don''t finished...... > > > > > > Sorry, may be I don''t explain so good. I am trying > > to compile > > > lustre > > > 1.8.4 with patches of lustre 1.8.4 with the kernel > > source code > > > > > > recomended by oracle (2.6.18-194.3.1.0.1.el5) in > > centos 5.5. > > > When I try > > > to compile I get a error. > > > > > > But If I try to compile same kernel with lustre > > 1.8.5 with > > > patches of > > > 1.8.5 in centos 5.5 it work, but I need to use 1.8.4 > > becouse > > > all my > > > system has 1.8.4 installed > > > > > > > > > > > > > > > > > > El mar, 08-02-2011 a las 08:24 +0100, Alfonso Pardo > > escribi?: > > > > > > > Sorry, may be I don''t explain so good. I am trying > > to > > > compile lustre > > > > 1.8.4 with patches of lustre 1.8.4 with the kernel > > source > > > code > > > > recomended by oracle (2.6.18-194.3.1.0.1.el5) in > > centos 5.5. > > > > > > > > > > > > > > > > > > > > > > > > El lun, 07-02-2011 a las 14:41 -0500, Brian J. > > Murrell > > > escribi?: > > > > > On Thu, 2011-02-03 at 09:35 +0100, Alfonso Pardo > > wrote: > > > > > > But, I have used a kernel with subsequenced > > recomended > > > by Oracle, I have > > > > > > downloaded the source kernel from Oracle > > lustre 1.8.4 > > > web page. > > > > > > > > > > But you are trying to patch it with Lustre > > 1.8.5. You > > > cannot (usually) > > > > > do that. If you use 1.8.4 you need to use the > > kernel that > > > it was built > > > > > to work with. If you use 1.8.5 you need to use > > the kernel > > > that *it* was > > > > > built to work with. You cannot (again, usually) > > mix and > > > match the > > > > > supported kernel from one Lustre release with > > the patches > > > from another. > > > > > > > > > > b. > > > > > > > > > > _______________________________________________ > > > > > Lustre-discuss mailing list > > > > > Lustre-discuss at lists.lustre.org > > > > > > > http://lists.lustre.org/mailman/listinfo/lustre-discuss > > > > > > > > > > -- > > > Alfonso Pardo D?az > > > > > > Unidad de Sistemas y Explotacion (USE) > > > CETA-CIEMAT > > > Calle Sola n? 1, Trujillo (CACERES) > > > Tel. 927 65 93 17 > > > www.ceta-ciemat.es > > > > > > _______________________________________________ > > > Lustre-discuss mailing list > > > Lustre-discuss at lists.lustre.org > > > > > http://lists.lustre.org/mailman/listinfo/lustre-discuss > > > > > > > > > > > > > > > -- > > > > Alfonso Pardo D?az > > > > Unidad de Sistemas y Explotacion (USE) > > CETA-CIEMAT > > Calle Sola n? 1, Trujillo (CACERES) > > Tel. 927 65 93 17 > > www.ceta-ciemat.es > > > > > > > > > > > > -- > > Wojciech Turek > > > > Senior System Architect > > > > High Performance Computing Service > > University of Cambridge > > Email: wjt27 at cam.ac.uk > > Tel: (+)44 1223 763517 > > -- > Alfonso Pardo D?az > > Unidad de Sistemas y Explotacion (USE) > CETA-CIEMAT > Calle Sola n? 1, Trujillo (CACERES) > Tel. 927 65 93 17 > www.ceta-ciemat.es > >-- Wojciech Turek Senior System Architect High Performance Computing Service University of Cambridge Email: wjt27 at cam.ac.uk Tel: (+)44 1223 763517 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lustre.org/pipermail/lustre-discuss/attachments/20110211/46b705bf/attachment.html