Dam Thanh Tung
2009-Jun-22 01:58 UTC
[Lustre-discuss] Lustre-discuss Digest, Vol 41, Issue 39
> > > > ------------------------------ > > Message: 4 > Date: Sat, 20 Jun 2009 10:09:23 -0600 > From: Robert LeBlanc <robert at leblancnet.us> > Subject: Re: [Lustre-discuss] VMware error on lustre client > To: lustre-discuss at lists.lustre.org > Message-ID: > <c5b98f840906200909qb14aacbrdfcec189f30d203d at mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > On Fri, Jun 19, 2009 at 8:44 PM, Dam Thanh Tung <tungdt at isds.vn> wrote: > > > Poor me! The weekend started with new error in my lustre system. > > > > I have just installed lustren on my Centos 5.3 PC,all the package i used > is > > > > > > e2fsprogs-1.40.11.sun1-0redhat.rhel5.x86_64.rpm > > kernel-lustre-smp-2.6.18-92.1.17.el5_lustre.1.8.0.x86_64.rpm > > lustre-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm > > lustre-client-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm > > lustre-client-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm > > lustre-ldiskfs-3.0.8-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm > > lustre-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm > > > > Everything worked well.( I used my PC as a lustre client and copy some > > file, it''s OK ). Now when i install VMware workstation 6.5 by rpm > package > > VMware-Workstation-6.5.1-126130.x86_64.rpm > > The install process finished without any error. But when i try to start > > VMware, there is an error on my screen, it said that: > > > > C header files matching your running kernel were not found. > > Refer to your distribution''s documentation for installation instructions > > > > So i can''t use VMware. Anyone can help me to resolv it,please ? > > > > You will need to get the source RPMs for the kernel and build VMware''s > modules against it. Since you are not using the stock CentOS kernel, there > is not a provided kernel from VMware. I''ve had to always build my VMware > modules on Debian. I''m not very familiar with CentOS so I can''t give you > details about how to do it. > > Thanks for reply, I''ll try to figure it out > > > > ----------------------------------------------------------------------------- > > > The VMWare scriptis probably looking for /usr/src/kernels/`uname -r` > or/usr/src/kernels/`uname > -r`-`uname-i` > > Check if you have /usr/src/kernels/2.6.18-92.1.17-x86_64 and create a link > at > /usr/src/kernels/2.6.18-92.1.17.el5_lustre > > ln > -s /usr/src/kernels/2.6.18-92.1.17.el5_lustre > /usr/src/kernels/2.6.18-92.1.17-x86_64 > > if that doesn''t do it try > > ln -s /usr/src/kernels/2.6.18-92.1.17.el5_lustre-x86_64 > /usr/src/kernels/2.6.18-92.1.17-x86_64 > > Erik > > On Sat, Jun 20, 2009 at 12:09 PM, Robert LeBlanc <robert at leblancnet.us > >wrote: > > > > > > > On Fri, Jun 19, 2009 at 8:44 PM, Dam Thanh Tung <tungdt at isds.vn> wrote: > > > >> Poor me! The weekend started with new error in my lustre system. > >> > >> I have just installed lustren on my Centos 5.3 PC,all the package i used > >> is > >> > >> e2fsprogs-1.40.11.sun1-0redhat.rhel5.x86_64.rpm > >> kernel-lustre-smp-2.6.18-92.1.17.el5_lustre.1.8.0.x86_64.rpm > >> lustre-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm > >> lustre-client-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm > >> > lustre-client-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm > >> lustre-ldiskfs-3.0.8-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm > >> lustre-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm > >> > >> Everything worked well.( I used my PC as a lustre client and copy some > >> file, it''s OK ). Now when i install VMware workstation 6.5 by rpm > package > >> VMware-Workstation-6.5.1-126130.x86_64.rpm > >> The install process finished without any error. But when i try to start > >> VMware, there is an error on my screen, it said that: > >> > >> C header files matching your running kernel were not found. > >> Refer to your distribution''s documentation for installation instructions > >> > >> So i can''t use VMware. Anyone can help me to resolv it,please ? > >> > >> You will need to get the source RPMs for the kernel and build VMware''s > > modules against it. Since you are not using the stock CentOS kernel, > there > > is not a provided kernel from VMware. I''ve had to always build my VMware > > modules on Debian. I''m not very familiar with CentOS so I can''t give you > > details about how to do it. > > > > Robert LeBlanc > > > > > > _______________________________________________ > > Lustre-discuss mailing list > > Lustre-discuss at lists.lustre.org > > http://lists.lustre.org/mailman/listinfo/lustre-discuss > > > > >I followed your guidance, but it didn''t work :(> > > > > > _______________________________________________ > Lustre-discuss mailing list > Lustre-discuss at lists.lustre.org > http://lists.lustre.org/mailman/listinfo/lustre-discuss > > > End of Lustre-discuss Digest, Vol 41, Issue 39 > ********************************************** >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lustre.org/pipermail/lustre-discuss/attachments/20090622/dd16d6d4/attachment.html
Dam Thanh Tung
2009-Jun-22 02:24 UTC
[Lustre-discuss] Lustre-discuss Digest, Vol 41, Issue 39
I tried to switch back to the default Centos kernel and install lustre-client and lustre-client-module rpms ( as the manual said, it''s enough for patchless client ) but when i try to mount, an other error happens: mount -t lustre 192.168.1.200 at tcp0:/lustre /mnt/lustre/ mount.lustre: mount 192.168.1.200 at tcp0:/lustre at /mnt/lustre failed: No such device Are the lustre modules loaded? Check /etc/modprobe.conf and /proc/filesystems Note ''alias lustre llite'' should be removed from modprobe.conf Could you help me once again ? :( I think i did exactly all the thing the Lustre 1.8 Operation Manual said :( On Mon, Jun 22, 2009 at 8:58 AM, Dam Thanh Tung <tungdt at isds.vn> wrote:> > >> >> >> ------------------------------ >> >> Message: 4 >> Date: Sat, 20 Jun 2009 10:09:23 -0600 >> From: Robert LeBlanc <robert at leblancnet.us> >> Subject: Re: [Lustre-discuss] VMware error on lustre client >> To: lustre-discuss at lists.lustre.org >> Message-ID: >> <c5b98f840906200909qb14aacbrdfcec189f30d203d at mail.gmail.com> >> Content-Type: text/plain; charset="iso-8859-1" >> >> On Fri, Jun 19, 2009 at 8:44 PM, Dam Thanh Tung <tungdt at isds.vn> wrote: >> >> > Poor me! The weekend started with new error in my lustre system. >> > >> > I have just installed lustren on my Centos 5.3 PC,all the package i used >> is >> > >> > >> > e2fsprogs-1.40.11.sun1-0redhat.rhel5.x86_64.rpm >> > kernel-lustre-smp-2.6.18-92.1.17.el5_lustre.1.8.0.x86_64.rpm >> > lustre-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm >> > lustre-client-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm >> > >> lustre-client-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm >> > lustre-ldiskfs-3.0.8-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm >> > lustre-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm >> > >> > Everything worked well.( I used my PC as a lustre client and copy some >> > file, it''s OK ). Now when i install VMware workstation 6.5 by rpm >> package >> > VMware-Workstation-6.5.1-126130.x86_64.rpm >> > The install process finished without any error. But when i try to start >> > VMware, there is an error on my screen, it said that: >> > >> > C header files matching your running kernel were not found. >> > Refer to your distribution''s documentation for installation instructions >> > >> > So i can''t use VMware. Anyone can help me to resolv it,please ? >> > >> > You will need to get the source RPMs for the kernel and build VMware''s >> modules against it. Since you are not using the stock CentOS kernel, there >> is not a provided kernel from VMware. I''ve had to always build my VMware >> modules on Debian. I''m not very familiar with CentOS so I can''t give you >> details about how to do it. >> >> Thanks for reply, I''ll try to figure it out >> >> >> >> ----------------------------------------------------------------------------- >> >> >> >> The VMWare scriptis probably looking for /usr/src/kernels/`uname -r` >> or/usr/src/kernels/`uname >> -r`-`uname-i` >> >> Check if you have /usr/src/kernels/2.6.18-92.1.17-x86_64 and create a link >> at >> /usr/src/kernels/2.6.18-92.1.17.el5_lustre >> >> ln >> -s /usr/src/kernels/2.6.18-92.1.17.el5_lustre >> /usr/src/kernels/2.6.18-92.1.17-x86_64 >> >> if that doesn''t do it try >> >> ln -s /usr/src/kernels/2.6.18-92.1.17.el5_lustre-x86_64 >> /usr/src/kernels/2.6.18-92.1.17-x86_64 >> >> Erik >> >> On Sat, Jun 20, 2009 at 12:09 PM, Robert LeBlanc <robert at leblancnet.us >> >wrote: >> >> > >> > >> > On Fri, Jun 19, 2009 at 8:44 PM, Dam Thanh Tung <tungdt at isds.vn> wrote: >> > >> >> Poor me! The weekend started with new error in my lustre system. >> >> >> >> I have just installed lustren on my Centos 5.3 PC,all the package i >> used >> >> is >> >> >> >> e2fsprogs-1.40.11.sun1-0redhat.rhel5.x86_64.rpm >> >> kernel-lustre-smp-2.6.18-92.1.17.el5_lustre.1.8.0.x86_64.rpm >> >> lustre-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm >> >> lustre-client-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm >> >> >> lustre-client-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm >> >> lustre-ldiskfs-3.0.8-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm >> >> lustre-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm >> >> >> >> Everything worked well.( I used my PC as a lustre client and copy some >> >> file, it''s OK ). Now when i install VMware workstation 6.5 by rpm >> package >> >> VMware-Workstation-6.5.1-126130.x86_64.rpm >> >> The install process finished without any error. But when i try to start >> >> VMware, there is an error on my screen, it said that: >> >> >> >> C header files matching your running kernel were not found. >> >> Refer to your distribution''s documentation for installation >> instructions >> >> >> >> So i can''t use VMware. Anyone can help me to resolv it,please ? >> >> >> >> You will need to get the source RPMs for the kernel and build VMware''s >> > modules against it. Since you are not using the stock CentOS kernel, >> there >> > is not a provided kernel from VMware. I''ve had to always build my VMware >> > modules on Debian. I''m not very familiar with CentOS so I can''t give you >> > details about how to do it. >> > >> > Robert LeBlanc >> > >> > >> > _______________________________________________ >> > Lustre-discuss mailing list >> > Lustre-discuss at lists.lustre.org >> > http://lists.lustre.org/mailman/listinfo/lustre-discuss >> > >> > >> > > I followed your guidance, but it didn''t work :( > >> >> >> >> >> >> _______________________________________________ >> Lustre-discuss mailing list >> Lustre-discuss at lists.lustre.org >> http://lists.lustre.org/mailman/listinfo/lustre-discuss >> >> >> End of Lustre-discuss Digest, Vol 41, Issue 39 >> ********************************************** >> > >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lustre.org/pipermail/lustre-discuss/attachments/20090622/a77282a2/attachment.html