Okay I went to the sun download site and retrieved the lustre RPM''s for my platform: lustrefour:~/Desktop # uname -a Linux lustrefour 2.6.22.5-31-default #1 SMP 2007/09/21 22:29:00 UTC x86_64 x86_64 x86_64 GNU/Linux lustrefour:~/Desktop # cat /etc/grub.conf setup --stage2=/boot/grub/stage2 (hd0,0) (hd0,0) quit lustrefour:~/Desktop # cat /proc/version Linux version 2.6.22.5-31-default (geeko at buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC lustrefour:~/Desktop # rpm -qf /boot/vmlinuz kernel-default-2.6.22.5-31 lustrefour:~/Desktop # I installed all the rpm''s but I can''t boot the kernel. What didn''t I do? I''m new to openSuse.
After doing a mkinitrd and rebooting I still fail to load the lustre openSuse 10.3 kernel.? It fails when asking: Want me to fall back to /dev/disk/by-id/scsi-SATA y/n I have tried editing my fstab and menu.lst file.? Is there anything else I must edit? lustrefour:~ # cat /etc/fstab /dev/sda1 ?????????? /??????????????????? ext3?????? acl,user_xattr??????? 1 1 proc???????????????? /proc??????????????? proc?????? defaults????????????? 0 0 sysfs??????????????? /sys???????????????? sysfs????? noauto??????????????? 0 0 debugfs????????????? /sys/kernel/debug??? debugfs??? noauto??????????????? 0 0 usbfs??????????????? /proc/bus/usb??????? usbfs????? noauto??????????????? 0 0 devpts?????????????? /dev/pts???????????? devpts???? mode=0620,gid=5?????? 0 0 /dev/fd0???????????? /media/floppy??????? auto?????? noauto,user,sync????? 0 0 lustrefour:~ # # Modified by YaST2. Last modification on Sun Jan 11 20:54:40 UTC 2009 default 0 timeout 8 ##YaST - generic_mbr gfxmenu (hd0,0)/boot/message ##YaST - activate ###Don''t change this comment - YaST2 identifier: Original name: lustre### title lustre ??? root (hd0,0) ??? kernel /boot/vmlinuz-2.6.16.60-0.27_lustre.1.6.6-smp root=/dev/sda1 vga=0x317??? splash=silent showopts ??? initrd /boot/initrd-2.6.16.60-0.27_lustre.1.6.6-smp ###Don''t change this comment - YaST2 identifier: Original name: linux### title openSUSE 10.3 ??? root (hd0,0) ??? kernel /boot/vmlinuz-2.6.22.5-31-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD103UJS13PJ90QB38092-part1 vga=0x317??? splash=silent showopts ??? initrd /boot/initrd-2.6.22.5-31-default ###Don''t change this comment - YaST2 identifier: Original name: floppy### title Floppy ??? rootnoverify (hd0,0) ??? chainloader (fd0)+1 ###Don''t change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- openSUSE 10.3 ??? root (hd0,0) ??? kernel /boot/vmlinuz-2.6.22.5-31-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD103UJS13PJ90QB38092-part1 vga=normal showopts ide=nodma apm=off acpi=off noresume edd=off 3 ??? initrd /boot/initrd-2.6.22.5-31-default lustrefour:~ #? --- On Sun, 1/11/09, Guido Juckeland <guido.juckeland at tu-dresden.de> wrote: From: Guido Juckeland <guido.juckeland at tu-dresden.de> Subject: Re: [Lustre-discuss] How to use the openSuse 10.3 kernel. To: "Arden Wiebe" <albert682 at yahoo.com> Date: Sunday, January 11, 2009, 2:35 PM I would try an "mkinitrd". Guido Arden Wiebe wrote:> Okay I went to the sun download site and retrieved the lustre RPM''s for my platform: > > lustrefour:~/Desktop # uname -a > Linux lustrefour 2.6.22.5-31-default #1 SMP 2007/09/21 22:29:00 UTC x86_64 x86_64 x86_64 GNU/Linux > lustrefour:~/Desktop # cat /etc/grub.conf > setup --stage2=/boot/grub/stage2 (hd0,0) (hd0,0) > quit > lustrefour:~/Desktop # cat /proc/version > Linux version 2.6.22.5-31-default (geeko at buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC > lustrefour:~/Desktop # rpm -qf /boot/vmlinuz > kernel-default-2.6.22.5-31 > lustrefour:~/Desktop # > > > I installed all the rpm''s but I can''t boot the kernel.? What didn''t I do?? I''m new to openSuse. > > >? ? ??? > _______________________________________________ > Lustre-discuss mailing list > Lustre-discuss at lists.lustre.org > http://lists.lustre.org/mailman/listinfo/lustre-discuss >-- ______________________________________________ Guido Juckeland, M.Sc. Senior System Engineer (HPC) Technische Universit?t Dresden Center for Information Services and High Performance Computing (ZIH) D-01062 Dresden Germany Contact: Trefftz-Bau, HRSK/151 Phone:? (+49) 351 463-39871 Fax:? ? (+49) 351 463-37773 e-mail: guido.juckeland at tu-dresden.de WWW:? ? http://www.tu-dresden.de/zih -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lustre.org/pipermail/lustre-discuss/attachments/20090111/9d6cafb3/attachment.html
Here is what I have done to try and get it working on this box: lustrethree:~/Desktop # rpm -ivh kernel-lustre-smp-2.6.16-60_0.27_lustre.1.6.6.x86_64.rpm Preparing...??????????????? ########################################### [100%] ??????? package kernel-lustre-smp-2.6.16-60_0.27_lustre.1.6.6 is already installed lustrethree:~/Desktop # rpm -ivh lustre-ldiskfs-3.0.6-2.6.16.60_0.27_lustre.1.6.6_smp.x86_64.rpm Preparing...??????????????? ########################################### [100%] ??????? package lustre-ldiskfs-3.0.6-2.6.16.60_0.27_lustre.1.6.6_smp is already installed lustrethree:~/Desktop # rpm -ivh lustre-modules-1.6.6-2.6.16.60_0.27_lustre.1.6.6_smp.x86_64.rpm Preparing...??????????????? ########################################### [100%] ??????? package lustre-modules-1.6.6-2.6.16.60_0.27_lustre.1.6.6_smp is already installed lustrethree:~/Desktop # rpm -ivh lustre-1.6.6-2.6.16.60_0.27_lustre.1.6.6_smp.x86_64.rpm Preparing...??????????????? ########################################### [100%] ??????? package lustre-1.6.6-2.6.16.60_0.27_lustre.1.6.6_smp is already installed lustrethree:~/Desktop # First have to solve for the dependency.? Downloaded from http://rpmfind.net//linux/RPM/opensuse/10.3/x86_64/db43-4.3.29-59.x86_64.html for future reference. lustrethree:~/Desktop # rpm -ivh db43-4.3.29-59.x86_64.rpm Preparing...??????????????? ########################################### [100%] ?? 1:db43?????????????????? ########################################### [100%] lustrethree:~/Desktop # rpm --force -Uvh e2fsprogs-1.40.11.sun1-0suse.sles10.x86_64.rpm Preparing...??????????????? ########################################### [100%] ?? 1:e2fsprogs????????????? ########################################### [100%] lustrethree:~/Desktop # Reboot and cross fingers. --- On Sun, 1/11/09, Arden Wiebe <albert682 at yahoo.com> wrote: From: Arden Wiebe <albert682 at yahoo.com> Subject: Re: [Lustre-discuss] How to use the openSuse 10.3 kernel. To: "Guido Juckeland" <guido.juckeland at tu-dresden.de>, lustre-discuss at lists.Lustre.org Date: Sunday, January 11, 2009, 5:11 PM After doing a mkinitrd and rebooting I still fail to load the lustre openSuse 10.3 kernel.? It fails when asking: Want me to fall back to /dev/disk/by-id/scsi-SATA y/n I have tried editing my fstab and menu.lst file.? Is there anything else I must edit? lustrefour:~ # cat /etc/fstab /dev/sda1 ?????????? /??????????????????? ext3?????? acl,user_xattr??????? 1 1 proc???????????????? /proc??????????????? proc?????? defaults????????????? 0 0 sysfs??????????????? /sys???????????????? sysfs????? noauto??????????????? 0 0 debugfs????????????? /sys/kernel/debug??? debugfs??? noauto??????????????? 0 0 usbfs??????????????? /proc/bus/usb??????? usbfs????? noauto??????????????? 0 0 devpts?????????????? /dev/pts???????????? devpts???? mode=0620,gid=5?????? 0 0 /dev/fd0???????????? /media/floppy??????? auto?????? noauto,user,sync????? 0 0 lustrefour:~ # # Modified by YaST2. Last modification on Sun Jan 11 20:54:40 UTC 2009 default 0 timeout 8 ##YaST - generic_mbr gfxmenu (hd0,0)/boot/message ##YaST - activate ###Don''t change this comment - YaST2 identifier: Original name: lustre### title lustre ??? root (hd0,0) ??? kernel /boot/vmlinuz-2.6.16.60-0.27_lustre.1.6.6-smp root=/dev/sda1 vga=0x317??? splash=silent showopts ??? initrd /boot/initrd-2.6.16.60-0.27_lustre.1.6.6-smp ###Don''t change this comment - YaST2 identifier: Original name: linux### title openSUSE 10.3 ??? root (hd0,0) ??? kernel /boot/vmlinuz-2.6.22.5-31-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD103UJS13PJ90QB38092-part1 vga=0x317??? splash=silent showopts ??? initrd /boot/initrd-2.6.22.5-31-default ###Don''t change this comment - YaST2 identifier: Original name: floppy### title Floppy ??? rootnoverify (hd0,0) ??? chainloader (fd0)+1 ###Don''t change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- openSUSE 10.3 ??? root (hd0,0) ??? kernel /boot/vmlinuz-2.6.22.5-31-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD103UJS13PJ90QB38092-part1 vga=normal showopts ide=nodma apm=off acpi=off noresume edd=off 3 ??? initrd /boot/initrd-2.6.22.5-31-default lustrefour:~ #? --- On Sun, 1/11/09, Guido Juckeland <guido.juckeland at tu-dresden.de> wrote: From: Guido Juckeland <guido.juckeland at tu-dresden.de> Subject: Re: [Lustre-discuss] How to use the openSuse 10.3 kernel. To: "Arden Wiebe" <albert682 at yahoo.com> Date: Sunday, January 11, 2009, 2:35 PM I would try an "mkinitrd". Guido Arden Wiebe wrote:> Okay I went to the sun download site and retrieved the lustre RPM''s for my platform: > > lustrefour:~/Desktop # uname -a > Linux lustrefour 2.6.22.5-31-default #1 SMP 2007/09/21 22:29:00 UTC x86_64 x86_64 x86_64 GNU/Linux > lustrefour:~/Desktop # cat /etc/grub.conf > setup--stage2=/boot/grub/stage2 (hd0,0) (hd0,0)> quit > lustrefour:~/Desktop # cat /proc/version > Linux version 2.6.22.5-31-default (geeko at buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC > lustrefour:~/Desktop # rpm -qf /boot/vmlinuz > kernel-default-2.6.22.5-31 > lustrefour:~/Desktop # > > > I installed all the rpm''s but I can''t boot the kernel.? What didn''t I do?? I''m new to openSuse. > > >? ? ??? > _______________________________________________ > Lustre-discuss mailing list > Lustre-discuss at lists.lustre.org > http://lists.lustre.org/mailman/listinfo/lustre-discuss >-- ______________________________________________ Guido Juckeland, M.Sc. Senior System Engineer (HPC) Technische Universit?t Dresden Center for Information Services and High Performance Computing (ZIH) D-01062 Dresden Germany Contact: Trefftz-Bau, HRSK/151 Phone:? (+49) 351 463-39871 Fax:? ? (+49) 351 463-37773 e-mail: guido.juckeland at tu-dresden.de WWW:? ? http://www.tu-dresden.de/zih -----Inline Attachment Follows----- _______________________________________________ Lustre-discuss mailing list Lustre-discuss at lists.lustre.org http://lists.lustre.org/mailman/listinfo/lustre-discuss -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lustre.org/pipermail/lustre-discuss/attachments/20090111/36b87c37/attachment-0001.html
There was the mkinitrd command issued.? Notice there is a difference in loaded modules but none that I would suspect making the system still hang looking for a Want me to fall back to /dev/disk/by-id/scsi-SATA y/n error.? Trying a clean install again with slightly different bios settings.? Oh those are set for ahci in the bios as it doesn''t find any drives without. lustrethree:/boot # mkinitrd Kernel image:?? /boot/vmlinuz-2.6.16.60-0.27_lustre.1.6.6-smp Initrd image:?? /boot/initrd-2.6.16.60-0.27_lustre.1.6.6-smp Root device:??? /dev/disk/by-id/scsi-SATA_SAMSUNG_HD103UJS13PJDWQA29776-part1 (/?????????????????????????????????????????????????????????????????????????????????????????????????????? dev/sda1) (mounted on / as ext3) Kernel Modules: processor thermal scsi_mod libata ahci pata_marvell fan jbd ext3??????????????????????????????????????????????????????????????????????????????????????????????????????? edd sd_mod usbcore ohci-hcd uhci-hcd ehci-hcd usbhid Features:?????? block usb resume.userspace resume.kernel Bootsplash:???? SuSE (1280x1024) 49142 blocks Kernel image:?? /boot/vmlinuz-2.6.22.5-31-default Initrd image:?? /boot/initrd-2.6.22.5-31-default Root device:??? /dev/disk/by-id/scsi-SATA_SAMSUNG_HD103UJS13PJDWQA29776-part1 (/dev/sda1) (mounted on / as ext3) Kernel Modules: processor thermal scsi_mod libata ahci pata_marvell fan jbd mbcache ext3 edd sd_mod usbcore ohci-hcd uhci-hcd ehci-hcd ff-memless hid usbhid Features:?????? block usb resume.userspace resume.kernel Bootsplash:???? SuSE (1280x1024) 25990 blocks lustrethree:/boot # --- On Sun, 1/11/09, Arden Wiebe <albert682 at yahoo.com> wrote: From: Arden Wiebe <albert682 at yahoo.com> Subject: Re: [Lustre-discuss] How to use the openSuse 10.3 kernel. To: "Guido Juckeland" <guido.juckeland at tu-dresden.de>, lustre-discuss at lists.Lustre.org Date: Sunday, January 11, 2009, 6:28 PM Here is what I have done to try and get it working on this box: lustrethree:~/Desktop # rpm -ivh kernel-lustre-smp-2.6.16-60_0.27_lustre.1.6.6.x86_64.rpm Preparing...??????????????? ########################################### [100%] ??????? package kernel-lustre-smp-2.6.16-60_0.27_lustre.1.6.6 is already installed lustrethree:~/Desktop # rpm -ivh lustre-ldiskfs-3.0.6-2.6.16.60_0.27_lustre.1.6.6_smp.x86_64.rpm Preparing...??????????????? ########################################### [100%] ??????? package lustre-ldiskfs-3.0.6-2.6.16.60_0.27_lustre.1.6.6_smp is already installed lustrethree:~/Desktop # rpm -ivh lustre-modules-1.6.6-2.6.16.60_0.27_lustre.1.6.6_smp.x86_64.rpm Preparing...??????????????? ########################################### [100%] ??????? package lustre-modules-1.6.6-2.6.16.60_0.27_lustre.1.6.6_smp is already installed lustrethree:~/Desktop # rpm -ivh lustre-1.6.6-2.6.16.60_0.27_lustre.1.6.6_smp.x86_64.rpm Preparing...??????????????? ########################################### [100%] ??????? package lustre-1.6.6-2.6.16.60_0.27_lustre.1.6.6_smp is already installed lustrethree:~/Desktop # First have to solve for the dependency.? Downloaded from http://rpmfind.net//linux/RPM/opensuse/10.3/x86_64/db43-4.3.29-59.x86_64.html for future reference. lustrethree:~/Desktop # rpm -ivh db43-4.3.29-59.x86_64.rpm Preparing...??????????????? ########################################### [100%] ?? 1:db43?????????????????? ########################################### [100%] lustrethree:~/Desktop # rpm --force -Uvh e2fsprogs-1.40.11.sun1-0suse.sles10.x86_64.rpm Preparing...??????????????? ########################################### [100%] ?? 1:e2fsprogs????????????? ########################################### [100%] lustrethree:~/Desktop # Reboot and cross fingers. --- On Sun, 1/11/09, Arden Wiebe <albert682 at yahoo.com> wrote: From: Arden Wiebe <albert682 at yahoo.com> Subject: Re: [Lustre-discuss] How to use the openSuse 10.3 kernel. To: "Guido Juckeland" <guido.juckeland at tu-dresden.de>, lustre-discuss at lists.Lustre.org Date: Sunday, January 11, 2009, 5:11 PM After doing a mkinitrd and rebooting I still fail to load the lustre openSuse 10.3 kernel.? It fails when asking: Want me to fall back to /dev/disk/by-id/scsi-SATA y/n I have tried editing my fstab and menu.lst file.? Is there anything else I must edit? lustrefour:~ # cat /etc/fstab /dev/sda1 ?????????? /??????????????????? ext3?????? acl,user_xattr??????? 1 1 proc???????????????? /proc??????????????? proc?????? defaults????????????? 0 0 sysfs??????????????? /sys???????????????? sysfs????? noauto??????????????? 0 0 debugfs????????????? /sys/kernel/debug??? debugfs??? noauto??????????????? 0 0 usbfs??????????????? /proc/bus/usb??????? usbfs????? noauto??????????????? 0 0 devpts?????????????? /dev/pts???????????? devpts???? mode=0620,gid=5?????? 0 0 /dev/fd0???????????? /media/floppy??????? auto?????? noauto,user,sync????? 0 0 lustrefour:~ # # Modified by YaST2. Last modification on Sun Jan 11 20:54:40 UTC 2009 default 0 timeout 8 ##YaST - generic_mbr gfxmenu (hd0,0)/boot/message ##YaST - activate ###Don''t change this comment - YaST2 identifier: Original name: lustre### title lustre ??? root (hd0,0) ??? kernel /boot/vmlinuz-2.6.16.60-0.27_lustre.1.6.6-smp root=/dev/sda1 vga=0x317??? splash=silent showopts ??? initrd /boot/initrd-2.6.16.60-0.27_lustre.1.6.6-smp ###Don''t change this comment - YaST2 identifier: Original name: linux### title openSUSE 10.3 ??? root (hd0,0) ??? kernel /boot/vmlinuz-2.6.22.5-31-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD103UJS13PJ90QB38092-part1 vga=0x317??? splash=silent showopts ??? initrd /boot/initrd-2.6.22.5-31-default ###Don''t change this comment - YaST2 identifier: Original name: floppy### title Floppy ??? rootnoverify (hd0,0) ??? chainloader (fd0)+1 ###Don''t change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- openSUSE 10.3 ??? root (hd0,0) ??? kernel /boot/vmlinuz-2.6.22.5-31-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD103UJS13PJ90QB38092-part1 vga=normal showopts ide=nodma apm=off acpi=off noresume edd=off 3 ??? initrd /boot/initrd-2.6.22.5-31-default lustrefour:~ #? --- On Sun, 1/11/09, Guido Juckeland <guido.juckeland at tu-dresden.de> wrote: From: Guido Juckeland <guido.juckeland at tu-dresden.de> Subject: Re: [Lustre-discuss] How to use the openSuse 10.3 kernel. To: "Arden Wiebe" <albert682 at yahoo.com> Date: Sunday, January 11, 2009, 2:35 PM I would try an "mkinitrd". Guido Arden Wiebe wrote:> Okay I went to the sun download site and retrieved the lustre RPM''s for my platform: > > lustrefour:~/Desktop # uname -a > Linux lustrefour 2.6.22.5-31-default #1 SMP 2007/09/21 22:29:00 UTC x86_64 x86_64 x86_64 GNU/Linux > lustrefour:~/Desktop # cat /etc/grub.conf > setup--stage2=/boot/grub/stage2 (hd0,0) (hd0,0)> quit > lustrefour:~/Desktop # cat /proc/version > Linux version 2.6.22.5-31-default (geeko at buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC > lustrefour:~/Desktop # rpm -qf /boot/vmlinuz > kernel-default-2.6.22.5-31 > lustrefour:~/Desktop # > > > I installed all the rpm''s but I can''t boot the kernel.? What didn''t I do?? I''m new to openSuse. > > >? ? ??? > _______________________________________________ > Lustre-discuss mailing list > Lustre-discuss at lists.lustre.org > http://lists.lustre.org/mailman/listinfo/lustre-discuss >-- ______________________________________________ Guido Juckeland, M.Sc. Senior System Engineer (HPC) Technische Universit?t Dresden Center for Information Services and High Performance Computing (ZIH) D-01062 Dresden Germany Contact: Trefftz-Bau, HRSK/151 Phone:? (+49) 351 463-39871 Fax:? ? (+49) 351 463-37773 e-mail: guido.juckeland at tu-dresden.de WWW:? ? http://www.tu-dresden.de/zih -----Inline Attachment Follows----- _______________________________________________ Lustre-discuss mailing list Lustre-discuss at lists.lustre.org http://lists.lustre.org/mailman/listinfo/lustre-discuss -----Inline Attachment Follows----- _______________________________________________ Lustre-discuss mailing list Lustre-discuss at lists.lustre.org http://lists.lustre.org/mailman/listinfo/lustre-discuss -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lustre.org/pipermail/lustre-discuss/attachments/20090111/d0bddc2f/attachment.html