Sjoerd Meijer via llvm-dev
2022-Jan-27 15:59 UTC
[llvm-dev] [RFC] Spill2Reg: Selectively replace spills to stack with spills to vector registers
Same here, enjoyed reading this. Just a drive by comment about this:> Spill2Reg also works on real-life applications: In SPEC CPU 2017 525.x264 Spill2Reg improves performance by about 0.3%.Our codegen for SPEC is relatively inefficient and there is a lot to gain here (compared to GCC), especially for x264 where we are more than 20% behind. That's for AArch64 by the way, but since we are mostly fixing target independent things, I guess that's also the case for X86. While this 0.3% is nice (every little helps), I think things would look quite different when the inefficiencies are addressed (we are working on it/some), and spill2reg that is fixing up things now may not be able to do so when that is the case. Long story short, we only have a 10% uplift for 1 case, but we need some more performance numbers? Ideally for AArch64 too? ?? But thanks again for the write up and the work, really nice. Cheers. ________________________________ From: llvm-dev <llvm-dev-bounces at lists.llvm.org> on behalf of Vasileios Porpodas via llvm-dev <llvm-dev at lists.llvm.org> Sent: 27 January 2022 07:34 To: Philip Reames <listmail at philipreames.com> Cc: llvm-dev at lists.llvm.org <llvm-dev at lists.llvm.org> Subject: Re: [llvm-dev] [RFC] Spill2Reg: Selectively replace spills to stack with spills to vector registers Thanks Philip for the feedback, I am glad you enjoyed reading it. Vasileios On Wed, Jan 26, 2022 at 8:29 PM Philip Reames <listmail at philipreames.com<mailto:listmail at philipreames.com>> wrote: This is a wonderful writeup of an interesting design problem, and the chosen solution. I learned several things from reading it. Thank you taking the time to write this up. My takeaway after reading was that you've clearly thought through all the issues in some depth. I might not lean the same direction on each choice, but you've more than convinced me that you've thought about them and made a reasoned choice. Solid +1 on the design here. Philip On 1/26/22 6:57 PM, Vasileios Porpodas via llvm-dev wrote: Hi everyone, This is an RFC for a new machine IR pass called Spill2Reg, which selectively replaces spills to the stack with spills to vector registers. The chain of patches can be found here: https://reviews.llvm.org/D118298 (it includes all patches from D118298 to D118305). ### Overview The register allocator emits spill/reload instructions to temporarily save register values to memory. These are typically stores to the stack (aka spills) and loads from the stack (aka reloads or fills). These instructions hurt performance not only because they increase the number of instructions executed, but also because they add pressure to the memory resources, which may already be heavily used by the actual memory instructions of the workload. Spill2Reg aims at reducing this overhead by selectively replacing spills/reloads to/from the stack with spills/reloads to/from registers only when it is profitable. The target registers that will hold the spilled value must be of a different class than those that caused the spill, and in architectures like x86 or ARM we can use vector registers to save values from general purpose registers. Spill2reg can be profitable in a couple of cases: (i) on targets where spills to stack are always slower than spills to registers, (ii) in pathological cases with lots of spill/reload instructions back-to-back, (iii) in memory intensive workloads. It is worth pointing out that Spill2Reg can be profitable even on targets where spills to registers and spills to stack have a similar latency. This is because replacing some of the stack instructions with register instructions can help remove some stalls caused by bottle-necks in the memory resources. Early evaluation on a Skylake(Server) x86_64 system shows that Spill2Reg can improve performance of both synthetic tests and of real-life workloads. Why Spill to Registers? ======================There are a couple of reasons why it makes sense to spill to registers instead of memory. To summarize: (i) there is usually a lot of free register space even when spilling and (ii) spilling to vector registers can remove back-end stalls. The following sections discuss these points in more detail. 1. Free register space even when spilling ----------------------------------------- Consider the following code: ``` int D0, D1, D2, ..., D18; foo() { int t0 = D0 int t1 = D1 ... int t18 = D18 // Some code ... = t0 ... = t1 ... ... = t18 } ``` Variables t0 to t18 are all live across the middle point (marked with `// Some code`). When compiled for x86_64, this code will assign t0 to t14 to registers, but will spill t15 to t18. Here is what the assembly looks like: ``` movl D0(%rip), %eax movl %eax, -8(%rsp) # 4-byte Spill movl D1(%rip), %ecx movl D2(%rip), %edx movl D3(%rip), %esi movl D4(%rip), %edi movl D5(%rip), %r8d movl D6(%rip), %r9d movl D7(%rip), %r10d movl D8(%rip), %r11d movl D9(%rip), %ebx movl D10(%rip), %ebp movl D11(%rip), %r14d movl D12(%rip), %r15d movl D13(%rip), %r12d movl D14(%rip), %r13d movl D15(%rip), %eax movl %eax, -4(%rsp) # 4-byte Spill movl D16(%rip), %eax movl %eax, -12(%rsp) # 4-byte Spill movl D17(%rip), %eax movl %eax, -16(%rsp) # 4-byte Spill movl D18(%rip), %eax movl %eax, -20(%rsp) # 4-byte Spill # ... Some code ... movl -8(%rsp), %eax # 4-byte Reload movl %eax, U0(%rip) movl %ecx, U1(%rip) movl %edx, U2(%rip) movl %esi, U3(%rip) movl %edi, U4(%rip) movl %r8d, U5(%rip) movl %r9d, U6(%rip) movl %r10d, U7(%rip) movl %r11d, U8(%rip) movl %ebx, U9(%rip) movl %ebp, U10(%rip) movl %r14d, U11(%rip) movl %r15d, U12(%rip) movl %r12d, U13(%rip) movl %r13d, U14(%rip) movl -4(%rsp), %eax # 4-byte Reload movl %eax, U15(%rip) movl -12(%rsp), %eax # 4-byte Reload movl %eax, U16(%rip) movl -16(%rsp), %eax # 4-byte Reload movl %eax, U17(%rip) movl -20(%rsp), %eax # 4-byte Reload movl %eax, U18(%rip) ``` Meanwhile there is a lot of free space in the vector register file, yet we are spilling to memory. 2. Memory and register spills use different ports in x86 -------------------------------------------------------- According to [1] spill/reloads to/from the stack use ports 2, 3, 4, 7 on a Skylake Server x86 micro-architecture, while spills/reloads to/from the vector register file use Ports 0, 1, 5. This means that the stack-based and vector-register-based spills/reloads use different back-end resources, and by replacing one with the other can shift the overhead from some type of resources to another. This is particularly important for Spill2Reg, because it shows that it can improve performance even if spills-to-stack and spills-to-registers have a similar latency. If the CPU is stalling due to over-subscribed memory resources, Spill2Reg can replace some of them with spills-to-registers, which can help remove some of the stalls. I think this looks familiar ==========================If spilling to vector registers looks familiar, it is probably because GCC has included support for spilling to registers for quite some time. In x86 this was done with `vmovd` instructions spilling to `xmm` registers. However, to the best of my knowledge, spilling to vector registers in x86 has been disabled [2] due to stability [3,4,5], correctness [6], and performance [7] issues. The performance issues highlighted in [7] seem to be related to: (i) double spilling: the vector register used for spilling get spilled to memory, and (ii) folded reloads: if a reload can be folded into an instruction, then spilling to a vector register results in an additional instruction: the one extracting the value from the vector register and inserting it into the general purpose register. I believe that the proposed Spill2Reg design can address all these issues. These points are discussed in the following sections. Spill2Reg in x86 ===============There are several interesting points about spilling to vector registers in x86: - Writing/Reading to vector registers can be done with a single assembly instruction. So spilling to vector register does not introduce more instructions. - The vector register space is quite large at 2KB (32 ZMM registers X 64 bytes) in Skylake server, so the chances are that there will be a lot of free vector register space in general purpose workloads. - If needed we could insert values to any vector lane using `(V)PINSR{B,W,D,Q}` and `(V)PEXTR{B,W,D,Q}` (supported since SSE4.1), or to lane 0 using `MOVD` (supported since MMX). - We can choose between two types of instructions for moving data to vector registers: `MOVD/Q` and `PINSRD/Q`: - `PINSRD/Q` `PEXTRD/Q` allow us to insert/extract a value to/from any lane of the vector register. It is implemented in SSE4_1+. - `MOVD/Q` moves a 32/64bit value to the first lane of a vector register. It is implemented in MMX+ instruction sets, so it is widely supported. GCC’s implementation uses `MOVD`. - According to Agner Fog's latency/throughput data for Skylake [9], `MOVD` has a lower latency than `PINSRD/Q`, same latency than `MOV` to/from memory, but lower throughput: ``` uops uops uops fused unfused each latency throughput domain domain port Spill-to-reg ------------ MOVD mm/x r32/64 1 1 p5 2 1 MOVD r32/64 mm/x 1 1 p0 2 1 PINSRD/Q x,r,i 2 2 2p5 3 2 PEXTRB/W/D/Q r,x,i 2 2 p0 p5 3 1 Spill-to-stack -------------- MOV m,r 1 2 p237 p4 2 1 MOV r32/64, m 1 1 p23 2 0.5 ------------------------------------------------------------ mm : 64-bit mmx register x : 128-bit xmm register m : memory operand m32 : 32-bit memory operand Source: Agner Fog's Instruction tables: https://www.agner.org/optimize/instruction_tables.pdf ``` Spill2Reg on ARM ---------------- According to ARM's software optimization guide [8] section 4.3 (page 57), it is encouraged to spill to vector registers because these instructions have a lower latency than spills to memory. Also, given the RISC nature of ARM instructions, there are no folded memory operands that we have to worry about when applying Spill2Reg. Caveats ======- Instruction throughput/latency: Vector insert/extract instructions may have lower throughput or higher latency than memory load/stores on certain targets. If this is the case they should be used only when memory resources are over subscribed. - Double spilling: We must take extra care not to spill the vector registers that hold the spilled value, because this will only add overhead. This was also observed in GCC's implementation [7]. This is a concern when Spill2Reg is implemented as part of the register allocator's spiller. - Additional instructions: Stack based spills/reloads can potentially be folded. This is quite common in x86. For example, given a reload `MOV Reg1, [Spill]` and an instruction using `Reg1`, like `ADD Reg2, Reg1`, this can be folded into `Add Reg2, [Spill]`, saving one instruction. Spill2Reg can potentially block this folding, which will add an additional instruction that reloads the data from the vector before the `ADD`. This is a concern when Spill2Reg is implemented as part of the register allocator's spiller, because folding of spills/reloads may be taking place later on, after all spills/reloads have been emitted. - Frequency throttling: Some targets will lower their turbo frequency when running vector instructions [10]. Throttling is the highest for AVX-512 but decreases as the vector width decreases, and it seems that there is no frequency drop for 128-bit instructions. - Profitability models: There may be different trade-offs for different targets or different generations of the same target. Each target should implement its own profitability model. Proposed Design ==============Spill2Reg can be implemented either as part of the spiller, within the register allocator, or as a standalone pass after register allocation. Each design point has its own benefits and shortcomings. The following sections list some of the most important points for and against each design. The discussion provides some insights into why we believe Spill2Reg is best implemented as a separate pass after the register allocator and after physical registers are introduced. In the spiller versus as a standalone pass ------------------------------------------ ### In the spiller - Pros: - The spiller is a natural location for the Spill2Reg code. - All analysis data needed are already computed and readily available. - The actual logic is quite simple. - Cons: - The register allocator expects that a Spill/Reload is a store/load. So supporting Spill2Reg requires some refactoring. - Spill/Reload removal optimizations within the register allocator need to be updated to handle spills to registers. - The register allocation pass is already quite complex, and adding Spill2Reg can increase complexity even further. - Folded spills/reloads (see GCC issue [7]): We need to be able to skip Spill2Reg if spills/reloads to the stack can be folded. Folding happens after the spill code is emitted, so implementing this is not trivial. - Double-spills must be avoided (see GCC issue [7]): The vector pseudo register that holds the spilled value needs to be colored by the register allocator itself, and we need to guarantee that it won't get spilled. ### As a standalone pass - Pros: - Small pass, easy to design and maintain. - Easier pass testing. - Straight-forward tracking of performance improvements/regressions, without having to worry if changes in Spill2Reg may affect the decisions of the register allocator. - Cons: - May replicate analysis that is already available within the register allocator. - Yet one more compiler pass. Given the points listed above, and the performance/stability bugs reported in GCC [2,3,4,5,6,7], I believe that it makes sense to implement Spill2Reg as a standalone pass. This results in a simpler design, with simpler testing and easier performance tracking to avoid performance regressions. As a standalone-pass: Before or after VirtRegRewriter ----------------------------------------------------- Another design decision is whether we place the pass before or after the `Virtual Register Rewriter` pass. ### Before VirtRegRewriter - Pros: - We are still working with pseudo-registers. - Straight forward checking of pseudo register interference using LiveIntervals and LiveRegMatrix. - Cons: - The main issue is with testing. Testing Spill2Reg would require running the register allocator pass first, and relying on it to generate spill/reload code, which would make tests very verbose and tricky to write. - The pass would need to maintain the state of several data-structures, like LiveIntervals and LiveRegMatrix. ### After VirtRegRewriter - Pros: - The main point is ease of testing: We can test the pass in isolation, using small tests containing hand-written spill/reload code. No need to run other passes before it. - Fewer data structures to maintain. - Cons: - Spill2Reg needs its own live register tracking implementation since it can no longer rely on LiveIntervals and LiveRegMatrix for finding free physical registers. Given that the pass design is quite similar in both cases, and that testing is significantly nicer in one of them, the preferred option is after VirtRegRewriter. Target independent component ---------------------------- The Spill2Reg pass works as follows: 1. It collects all candidate spill/reloads. This filters out folded spills/reloads and unsupported data-types by the target (target dependent legality check). 2. Then it iterates through the collected candidates and checks if it is profitable to spill to the vector register (target dependent cost model). 3. If profitable, it generates the new spills/reloads to/from the vector register file and it removes the original instructions (target dependent spill/reload instruction generation). Target dependent components --------------------------- This includes: - Legality checks that test whether the opcodes and types of spills/reloads can be handled by the target. - The profitability heuristic, which checks whether we applying Spill2Reg for a specific set of spills/reloads will lead to better performing code on the target. - The generation of spill/reload instructions to/from a vector register. Profitability Heuristic in x86 ------------------------------ Given a candidate set of spills/reloads, we need to decide whether applying Spill2Reg is more profitable. We are currently implementing an all or nothing approach for the whole set: we will either replace all spills/reloads or none. According to [9] spills to vector registers have the same latency as spills to memory, but have lower throughput on Skylake. So replacing all spills to memory with spills to the stack can degrade performance. Instead, a better strategy is to spill to registers only when the memory units are over-subscribed, in an attempt to reduce any potential back-end stalls. Since our goal is to avoid back-end stalls caused by bottle-necks on memory resources, we need some way to measure when these stalls could happen. Ideally we would query a pipeline model (like the one used in instruction schedulers) to determine if spills-to-stack can cause pipeline stalls. For now the implementation is based on a simple instruction count: if the count of memory instructions in the proximity of the spill/reload is above a threshold, then apply Spill2Reg. Please note that the profitability heuristic is implemented as a target-dependent components, so other targets can implement their own specialized heuristics. Performance Results ==================The performance evaluation was done using `ba51d26ec4519f5b31de3acf643264504ea7bc7c` as a base commit on a Skylake Xeon Gold 6154. The code was compiled with `-O3 -march=native`. Applying Spill2Reg to the code of the motivating example shown in a previous section, replaces some of the spills/reloads with `movd` instructions, leading to about 10% better performance. Spill2Reg also works on real-life applications: In SPEC CPU 2017 525.x264 Spill2Reg improves performance by about 0.3%. References ---------- [1] WikiChip Skylake microarchitecture: https://en.wikichip.org/wiki/intel/microarchitectures/skylake_(server) [2] GCC spill to register: https://github.com/gcc-mirror/gcc/blob/5a431b60d1f221992e5e9f7a5c032df3b5fa35a5/gcc/config/i386/i386.c#L22874 [3] GCC stability bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70902 [4] GCC stability bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71596 [5] GCC stability bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71555 [6] GCC correctness bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71657 [7] GCC performance bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71453 [8] ARM Software Optimization Guide: https://developer.arm.com/documentation/swog309707/a [9] Agner Fog's Instruction tables: https://www.agner.org/optimize/instruction_tables.pdf [10] Daniel Lemire's AVX throttling blog: https://lemire.me/blog/2018/09/07/avx-512-when-and-how-to-use-these-new-instructions/ Thanks, Vasileios _______________________________________________ LLVM Developers mailing list llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20220127/b9183caa/attachment-0001.html>
Vasileios Porpodas via llvm-dev
2022-Jan-27 18:10 UTC
[llvm-dev] [RFC] Spill2Reg: Selectively replace spills to stack with spills to vector registers
Thanks for your comments Sjoerd, So far I have only tried a small synthetic test on AArch64, like the one with the back-to-back spills and reloads, and it seems to improve performance there too. I definitely need to do some more extensive performance evaluation, including AArch64. I have seen a few SPEC benchmarks improve, not just x264, but this depends on the compiler options used and the exact compiler commit checked out. But yeah the performance improvements are usually around .5%. Vasileios On Thu, Jan 27, 2022 at 7:59 AM Sjoerd Meijer <Sjoerd.Meijer at arm.com> wrote:> Same here, enjoyed reading this. Just a drive by comment about this: > > > Spill2Reg also works on real-life applications: In SPEC CPU 2017 > 525.x264 Spill2Reg improves performance by about 0.3%. > > Our codegen for SPEC is relatively inefficient and there is a lot to gain > here (compared to GCC), especially for x264 where we are more than 20% > behind. That's for AArch64 by the way, but since we are mostly fixing > target independent things, I guess that's also the case for X86. While > this 0.3% is nice (every little helps), I think things would look quite > different when the inefficiencies are addressed (we are working on > it/some), and spill2reg that is fixing up things now may not be able to do > so when that is the case. Long story short, we only have a 10% uplift for 1 > case, but we need some more performance numbers? Ideally for AArch64 too? > 🙂 > > But thanks again for the write up and the work, really nice. > > Cheers. > ------------------------------ > *From:* llvm-dev <llvm-dev-bounces at lists.llvm.org> on behalf of Vasileios > Porpodas via llvm-dev <llvm-dev at lists.llvm.org> > *Sent:* 27 January 2022 07:34 > *To:* Philip Reames <listmail at philipreames.com> > *Cc:* llvm-dev at lists.llvm.org <llvm-dev at lists.llvm.org> > *Subject:* Re: [llvm-dev] [RFC] Spill2Reg: Selectively replace spills to > stack with spills to vector registers > > Thanks Philip for the feedback, I am glad you enjoyed reading it. > > Vasileios > > On Wed, Jan 26, 2022 at 8:29 PM Philip Reames <listmail at philipreames.com> > wrote: > > This is a wonderful writeup of an interesting design problem, and the > chosen solution. I learned several things from reading it. Thank you > taking the time to write this up. > > My takeaway after reading was that you've clearly thought through all the > issues in some depth. I might not lean the same direction on each choice, > but you've more than convinced me that you've thought about them and made a > reasoned choice. Solid +1 on the design here. > > Philip > On 1/26/22 6:57 PM, Vasileios Porpodas via llvm-dev wrote: > > Hi everyone, > > This is an RFC for a new machine IR pass called Spill2Reg, which > selectively replaces spills to the stack with spills to vector registers. > The chain of patches can be found here: https://reviews.llvm.org/D118298 > (it includes all patches from D118298 to D118305). > > ### Overview > The register allocator emits spill/reload instructions to temporarily save > register values to memory. These are typically stores to the stack (aka > spills) and loads from the stack (aka reloads or fills). These instructions > hurt performance not only because they increase the number of instructions > executed, but also because they add pressure to the memory resources, which > may already be heavily used by the actual memory instructions of the > workload. > > Spill2Reg aims at reducing this overhead by selectively replacing > spills/reloads to/from the stack with spills/reloads to/from registers only > when it is profitable. The target registers that will hold the spilled > value must be of a different class than those that caused the spill, and in > architectures like x86 or ARM we can use vector registers to save values > from general purpose registers. Spill2reg can be profitable in a couple of > cases: (i) on targets where spills to stack are always slower than spills > to registers, (ii) in pathological cases with lots of spill/reload > instructions back-to-back, (iii) in memory intensive workloads. It is worth > pointing out that Spill2Reg can be profitable even on targets where spills > to registers and spills to stack have a similar latency. This is because > replacing some of the stack instructions with register instructions can > help remove some stalls caused by bottle-necks in the memory resources. > > Early evaluation on a Skylake(Server) x86_64 system shows that Spill2Reg > can improve performance of both synthetic tests and of real-life workloads. > > > Why Spill to Registers? > ======================> There are a couple of reasons why it makes sense to spill to registers > instead of memory. To summarize: (i) there is usually a lot of free > register space even when spilling and (ii) spilling to vector registers can > remove back-end stalls. The following sections discuss these points in more > detail. > > > 1. Free register space even when spilling > ----------------------------------------- > Consider the following code: > ``` > int D0, D1, D2, ..., D18; > foo() { > int t0 = D0 > int t1 = D1 > ... > int t18 = D18 > // Some code > ... = t0 > ... = t1 > ... > ... = t18 > } > ``` > > Variables t0 to t18 are all live across the middle point (marked with `// > Some code`). When compiled for x86_64, this code will assign t0 to t14 to > registers, but will spill t15 to t18. > Here is what the assembly looks like: > ``` > movl D0(%rip), %eax > movl %eax, -8(%rsp) # 4-byte Spill > movl D1(%rip), %ecx > movl D2(%rip), %edx > movl D3(%rip), %esi > movl D4(%rip), %edi > movl D5(%rip), %r8d > movl D6(%rip), %r9d > movl D7(%rip), %r10d > movl D8(%rip), %r11d > movl D9(%rip), %ebx > movl D10(%rip), %ebp > movl D11(%rip), %r14d > movl D12(%rip), %r15d > movl D13(%rip), %r12d > movl D14(%rip), %r13d > movl D15(%rip), %eax > movl %eax, -4(%rsp) # 4-byte Spill > movl D16(%rip), %eax > movl %eax, -12(%rsp) # 4-byte Spill > movl D17(%rip), %eax > movl %eax, -16(%rsp) # 4-byte Spill > movl D18(%rip), %eax > movl %eax, -20(%rsp) # 4-byte Spill > # ... Some code ... > movl -8(%rsp), %eax # 4-byte Reload > movl %eax, U0(%rip) > movl %ecx, U1(%rip) > movl %edx, U2(%rip) > movl %esi, U3(%rip) > movl %edi, U4(%rip) > movl %r8d, U5(%rip) > movl %r9d, U6(%rip) > movl %r10d, U7(%rip) > movl %r11d, U8(%rip) > movl %ebx, U9(%rip) > movl %ebp, U10(%rip) > movl %r14d, U11(%rip) > movl %r15d, U12(%rip) > movl %r12d, U13(%rip) > movl %r13d, U14(%rip) > movl -4(%rsp), %eax # 4-byte Reload > movl %eax, U15(%rip) > movl -12(%rsp), %eax # 4-byte Reload > movl %eax, U16(%rip) > movl -16(%rsp), %eax # 4-byte Reload > movl %eax, U17(%rip) > movl -20(%rsp), %eax # 4-byte Reload > movl %eax, U18(%rip) > ``` > > Meanwhile there is a lot of free space in the vector register file, yet we > are spilling to memory. > > > 2. Memory and register spills use different ports in x86 > -------------------------------------------------------- > According to [1] spill/reloads to/from the stack use ports 2, 3, 4, 7 on a > Skylake Server x86 micro-architecture, while spills/reloads to/from the > vector register file use Ports 0, 1, 5. This means that the stack-based and > vector-register-based spills/reloads use different back-end resources, and > by replacing one with the other can shift the overhead from some type of > resources to another. > > This is particularly important for Spill2Reg, because it shows that it can > improve performance even if spills-to-stack and spills-to-registers have a > similar latency. If the CPU is stalling due to over-subscribed memory > resources, Spill2Reg can replace some of them with spills-to-registers, > which can help remove some of the stalls. > > > I think this looks familiar > ==========================> If spilling to vector registers looks familiar, it is probably because GCC > has included support for spilling to registers for quite some time. In x86 > this was done with `vmovd` instructions spilling to `xmm` registers. > > However, to the best of my knowledge, spilling to vector registers in x86 > has been disabled [2] due to stability [3,4,5], correctness [6], and > performance [7] issues. > The performance issues highlighted in [7] seem to be related to: > (i) double spilling: the vector register used for spilling get spilled to > memory, and > (ii) folded reloads: if a reload can be folded into an instruction, then > spilling to a vector register results in an additional instruction: the one > extracting the value from the vector register and inserting it into the > general purpose register. > > I believe that the proposed Spill2Reg design can address all these issues. > These points are discussed in the following sections. > > > Spill2Reg in x86 > ===============> There are several interesting points about spilling to vector registers in > x86: > > - Writing/Reading to vector registers can be done with a single assembly > instruction. So spilling to vector register does not introduce more > instructions. > - The vector register space is quite large at 2KB (32 ZMM registers X 64 > bytes) in Skylake server, so the chances are that there will be a lot of > free vector register space in general purpose workloads. > - If needed we could insert values to any vector lane using > `(V)PINSR{B,W,D,Q}` and `(V)PEXTR{B,W,D,Q}` (supported since SSE4.1), or to > lane 0 using `MOVD` (supported since MMX). > - We can choose between two types of instructions for moving data to > vector registers: `MOVD/Q` and `PINSRD/Q`: > - `PINSRD/Q` `PEXTRD/Q` allow us to insert/extract a value to/from any > lane of the vector register. It is implemented in SSE4_1+. > - `MOVD/Q` moves a 32/64bit value to the first lane of a vector > register. It is implemented in MMX+ instruction sets, so it is widely > supported. GCC’s implementation uses `MOVD`. > - According to Agner Fog's latency/throughput data for Skylake [9], > `MOVD` has a lower latency than `PINSRD/Q`, same latency than `MOV` to/from > memory, but lower throughput: > > ``` > uops uops uops > fused unfused each latency throughput > domain domain port > Spill-to-reg > ------------ > MOVD mm/x r32/64 1 1 p5 2 1 > MOVD r32/64 mm/x 1 1 p0 2 1 > > PINSRD/Q x,r,i 2 2 2p5 3 2 > PEXTRB/W/D/Q r,x,i 2 2 p0 p5 3 1 > > Spill-to-stack > -------------- > MOV m,r 1 2 p237 p4 2 1 > MOV r32/64, m 1 1 p23 2 0.5 > ------------------------------------------------------------ > mm : 64-bit mmx register > x : 128-bit xmm register > m : memory operand > m32 : 32-bit memory operand > > Source: Agner Fog's Instruction tables: > https://www.agner.org/optimize/instruction_tables.pdf > ``` > > > Spill2Reg on ARM > ---------------- > According to ARM's software optimization guide [8] section 4.3 (page 57), > it is encouraged to spill to vector registers because these instructions > have a lower latency than spills to memory. > Also, given the RISC nature of ARM instructions, there are no folded > memory operands that we have to worry about when applying Spill2Reg. > > > Caveats > ======> - Instruction throughput/latency: Vector insert/extract instructions may > have lower throughput or higher latency than memory load/stores on certain > targets. If this is the case they should be used only when memory resources > are over subscribed. > - Double spilling: We must take extra care not to spill the vector > registers that hold the spilled value, because this will only add overhead. > This was also observed in GCC's implementation [7]. This is a concern when > Spill2Reg is implemented as part of the register allocator's spiller. > - Additional instructions: Stack based spills/reloads can potentially be > folded. This is quite common in x86. For example, given a reload `MOV Reg1, > [Spill]` and an instruction using `Reg1`, like `ADD Reg2, Reg1`, this can > be folded into `Add Reg2, [Spill]`, saving one instruction. Spill2Reg can > potentially block this folding, which will add an additional instruction > that reloads the data from the vector before the `ADD`. This is a concern > when Spill2Reg is implemented as part of the register allocator's spiller, > because folding of spills/reloads may be taking place later on, after all > spills/reloads have been emitted. > - Frequency throttling: Some targets will lower their turbo frequency when > running vector instructions [10]. Throttling is the highest for AVX-512 but > decreases as the vector width decreases, and it seems that there is no > frequency drop for 128-bit instructions. > - Profitability models: There may be different trade-offs for different > targets or different generations of the same target. Each target should > implement its own profitability model. > > > Proposed Design > ==============> Spill2Reg can be implemented either as part of the spiller, within the > register allocator, or as a standalone pass after register allocation. Each > design point has its own benefits and shortcomings. The following sections > list some of the most important points for and against each design. The > discussion provides some insights into why we believe Spill2Reg is best > implemented as a separate pass after the register allocator and after > physical registers are introduced. > > In the spiller versus as a standalone pass > ------------------------------------------ > > ### In the spiller > - Pros: > - The spiller is a natural location for the Spill2Reg code. > - All analysis data needed are already computed and readily available. > - The actual logic is quite simple. > > - Cons: > - The register allocator expects that a Spill/Reload is a store/load. So > supporting Spill2Reg requires some refactoring. > - Spill/Reload removal optimizations within the register allocator need > to be updated to handle spills to registers. > - The register allocation pass is already quite complex, and adding > Spill2Reg can increase complexity even further. > - Folded spills/reloads (see GCC issue [7]): We need to be able to skip > Spill2Reg if spills/reloads to the stack can be folded. Folding happens > after the spill code is emitted, so implementing this is not trivial. > - Double-spills must be avoided (see GCC issue [7]): The vector pseudo > register that holds the spilled value needs to be colored by the register > allocator itself, and we need to guarantee that it won't get spilled. > > ### As a standalone pass > - Pros: > - Small pass, easy to design and maintain. > - Easier pass testing. > - Straight-forward tracking of performance improvements/regressions, > without having to worry if changes in Spill2Reg may affect the decisions of > the register allocator. > > - Cons: > - May replicate analysis that is already available within the register > allocator. > - Yet one more compiler pass. > > > Given the points listed above, and the performance/stability bugs reported > in GCC [2,3,4,5,6,7], I believe that it makes sense to implement Spill2Reg > as a standalone pass. This results in a simpler design, with simpler > testing and easier performance tracking to avoid performance regressions. > > > As a standalone-pass: Before or after VirtRegRewriter > ----------------------------------------------------- > Another design decision is whether we place the pass before or after the > `Virtual Register Rewriter` pass. > > ### Before VirtRegRewriter > - Pros: > - We are still working with pseudo-registers. > - Straight forward checking of pseudo register interference using > LiveIntervals and LiveRegMatrix. > > - Cons: > - The main issue is with testing. Testing Spill2Reg would require > running the register allocator pass first, and relying on it to generate > spill/reload code, which would make tests very verbose and tricky to write. > - The pass would need to maintain the state of several data-structures, > like LiveIntervals and LiveRegMatrix. > > ### After VirtRegRewriter > - Pros: > - The main point is ease of testing: We can test the pass in isolation, > using small tests containing hand-written spill/reload code. No need to run > other passes before it. > - Fewer data structures to maintain. > > - Cons: > - Spill2Reg needs its own live register tracking implementation since it > can no longer rely on LiveIntervals and LiveRegMatrix for finding free > physical registers. > > > Given that the pass design is quite similar in both cases, and that > testing is significantly nicer in one of them, the preferred option is > after VirtRegRewriter. > > > Target independent component > ---------------------------- > The Spill2Reg pass works as follows: > 1. It collects all candidate spill/reloads. This filters out folded > spills/reloads and unsupported data-types by the target (target dependent > legality check). > 2. Then it iterates through the collected candidates and checks if it is > profitable to spill to the vector register (target dependent cost model). > 3. If profitable, it generates the new spills/reloads to/from the vector > register file and it removes the original instructions (target dependent > spill/reload instruction generation). > > Target dependent components > --------------------------- > This includes: > - Legality checks that test whether the opcodes and types of > spills/reloads can be handled by the target. > - The profitability heuristic, which checks whether we applying Spill2Reg > for a specific set of spills/reloads will lead to better performing code on > the target. > - The generation of spill/reload instructions to/from a vector register. > > > Profitability Heuristic in x86 > ------------------------------ > Given a candidate set of spills/reloads, we need to decide whether > applying Spill2Reg is more profitable. We are currently implementing an all > or nothing approach for the whole set: we will either replace all > spills/reloads or none. > > According to [9] spills to vector registers have the same latency as > spills to memory, but have lower throughput on Skylake. So replacing all > spills to memory with spills to the stack can degrade performance. Instead, > a better strategy is to spill to registers only when the memory units are > over-subscribed, in an attempt to reduce any potential back-end stalls. > > Since our goal is to avoid back-end stalls caused by bottle-necks on > memory resources, we need some way to measure when these stalls could > happen. Ideally we would query a pipeline model (like the one used in > instruction schedulers) to determine if spills-to-stack can cause pipeline > stalls. For now the implementation is based on a simple instruction count: > if the count of memory instructions in the proximity of the spill/reload is > above a threshold, then apply Spill2Reg. > > Please note that the profitability heuristic is implemented as a > target-dependent components, so other targets can implement their own > specialized heuristics. > > > Performance Results > ==================> The performance evaluation was done using > `ba51d26ec4519f5b31de3acf643264504ea7bc7c` as a base commit on a Skylake > Xeon Gold 6154. The code was compiled with `-O3 -march=native`. > Applying Spill2Reg to the code of the motivating example shown in a > previous section, replaces some of the spills/reloads with `movd` > instructions, leading to about 10% better performance. > Spill2Reg also works on real-life applications: In SPEC CPU 2017 525.x264 > Spill2Reg improves performance by about 0.3%. > > > > References > ---------- > [1] WikiChip Skylake microarchitecture: > https://en.wikichip.org/wiki/intel/microarchitectures/skylake_(server) > > [2] GCC spill to register: > https://github.com/gcc-mirror/gcc/blob/5a431b60d1f221992e5e9f7a5c032df3b5fa35a5/gcc/config/i386/i386.c#L22874 > > [3] GCC stability bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70902 > > [4] GCC stability bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71596 > > [5] GCC stability bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71555 > > [6] GCC correctness bug: > https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71657 > > [7] GCC performance bug: > https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71453 > > [8] ARM Software Optimization Guide: > https://developer.arm.com/documentation/swog309707/a > > [9] Agner Fog's Instruction tables: > https://www.agner.org/optimize/instruction_tables.pdf > > [10] Daniel Lemire's AVX throttling blog: > https://lemire.me/blog/2018/09/07/avx-512-when-and-how-to-use-these-new-instructions/ > > > Thanks, > Vasileios > > _______________________________________________ > LLVM Developers mailing listllvm-dev at lists.llvm.orghttps://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20220127/fe312722/attachment.html>