Krzysztof Parzyszek via llvm-dev
2020-Jan-10 14:01 UTC
[llvm-dev] Register Dataflow Analysis on X86
Hi Scott,
Sorry for the late reply, I was out of office during the holidays.
1. A def node can reach either a use node, or another def node. In the
highlighted phi node (p3224), the def (d3225) reaches another def (1598) in
statement (s1597), that’s why it’s needed.
2. The reason why the def of R11 in s1578 is not connected directly to the
use in s1725 is that there may be an intervening def between them (that phi node
of the register mask may be one such def).
--
Krzysztof Parzyszek kparzysz at quicinc.com<mailto:kparzysz at
quicinc.com> AI tools development
From: Scott Douglas Constable <sdconsta at syr.edu>
Sent: Friday, December 27, 2019 5:58 PM
To: Krzysztof Parzyszek <kparzysz at quicinc.com>
Cc: llvm-dev at lists.llvm.org
Subject: [EXT] Re: [llvm-dev] Register Dataflow Analysis on X86
Hi Krzysztof,
Thanks for the reply, I'm starting to understand the graph structure and
terminology much better now, especially with the document in RDFGraph.h. I'm
still a bit confused about some of the behavior I'm seeing with the phi
nodes that involve aggregate registers. Here is one example:
b1531: --- %bb.36 --- preds(2): %bb.35, %bb.128 succs(1): %bb.37
p3193: phi [+d3194<RBP>(,,u3211):,
u3195<RBP>(+d3170,b1526):u1437, u3196<RBP>(d2141,b2486):u2324]
p3197: phi [+d3198<RBX>(,,u3216):,
u3199<RBX>(+d3138,b1526):u1465, u3200<RBX>(+d3364,b2486):]
p3201: phi [+d3202<R12D>(,d1541,):, u3203<R12D>(+d3146,b1526):,
u3204<R12D>(d1878,b2486):u3148]
p3205: phi [+d3206<#1073741833>(,d1551,u1552):,
u3207"<#1073741833>(d1521,b1526):u1524,
u3779"<#1073741833>(d1517,b1526):,
u3780"<#1073741833>(d1513,b1526):u1522,
u3208"<#1073741833>(d2481,b2486):u2484,
u3695"<#1073741833>(d2477,b2486):,
u3696"<#1073741833>(d2473,b2486):u2482]
s1532: ADJCALLSTACKDOWN64 [d1533<RSP>!(+d3206,\~d3647",u1557):,
d1534<EFLAGS>!(+d3206,d1540,):d1533,
d1535<SSP>!(+d3206,\~d3646",u1558):d1534, u1536<RSP>!(+d3206):,
u1537<SSP>!(+d3206):u1536]
s1538: MOV32r0 [d1539<R12D>(+d3202,,):,
d1540<EFLAGS>!(d1534,d1549,):, d1541<R12>(+d3202,,u3221):d1539]
s1542: MOV32ri64 [d1543<RDX>(+d3206,\~d3645",u1561):d1535]
s1544: COPY [d1545<RDI>(+d3206,\~d3644",u1559):d1543,
u1546<R13>(d785):]
s1547: MOV32r0 [d1548<ESI>(+d3206,\~d3643",u1560):d1545,
d1549<EFLAGS>!(d1540,\~d3642",):]
s1550: MOV64rm [d1551<R11>(+d3206,\~d1554",u1562):d1548,
u1552<RIP>(+d3206):u1537]
s1553: CALL64pcrel32 __foo
[\~d1554"<#1073741833>!(d1551,d1579,):,
\~d3642"<#1073741833>!(d1549,,):,
\~d3643"<#1073741833>!(d1548,,):,
\~d3644"<#1073741833>!(d1545,,):,
\~d3645"<#1073741833>!(d1543,,):,
\~d3646"<#1073741833>!(d1535,,):,
\~d3647"<#1073741833>!(d1533,,):,
d1555<RSP>!(\~d1554",d1564,u1567):,
d1556<SSP>!(\~d1554",d1566,u1568):d1555, u1557<RSP>!(d1533):,
u1558<SSP>!(d1535):, u1559<RDI>!(d1545):, u1560<ESI>!(d1548):,
u1561<RDX>!(d1543):, u1562<R11>!(d1551):]
s1563: ADJCALLSTACKUP64 [d1564<RSP>!(d1555,,u3778"):,
d1565<EFLAGS>!(\~d1554",d1571,):d1556,
d1566<SSP>!(d1556,,u3777"):,
u1567<RSP>!(d1555):, u1568<SSP>!(d1556):]
s1569: MOV32r0 [d1570<R10D>(\~d1554",,u3776"):d1565,
d1571<EFLAGS>!(d1565,d1574,):]
s1572: MOV32r0 [d1573<R8D>(\~d1554",,u3775"):d1570,
d1574<EFLAGS>!(d1571,d1577,):]
s1575: MOV32r0 [d1576<R9D>(\~d1554",,u3774"):d1573,
d1577<EFLAGS>!(d1574,,u3773"):]
---> s1578: MOV64rm [d1579<R11>(\~d1554",,u3226"):d1576]
b1580: --- %bb.37 --- preds(3): %bb.36, %bb.49, %bb.64 succs(1): %bb.38
p3209: phi [+d3210<RBP>(,d1731,u3212):,
u3211<RBP>(+d3194,b1531):, u3212<RBP>(+d3210,b1710):,
u3213<RBP>(d1857,b1874):u3466]
p3214: phi [+d3215<RBX>(,,u3217):, u3216<RBX>(+d3198,b1531):,
u3217<RBX>(+d3215,b1710):u3257, u3218<RBX>(+d3290,b1874):u3470]
p3219: phi [+d3220<R12D>(,d1712,u1714):,
u3221<R12D>(d1541,b1531):, u3222<R12D>(d1712,b1710):u1717,
u3223<R12D>(d1878,b1874):u3204]
---> p3224: phi [+d3225<#1073741833>(,d1598,):,
u3226"<#1073741833>(d1579,b1531):,
u3773"<#1073741833>(d1577,b1531):,
u3774"<#1073741833>(d1576,b1531):,
u3775"<#1073741833>(d1573,b1531):,
u3776"<#1073741833>(d1570,b1531):,
u3777"<#1073741833>(d1566,b1531):,
u3778"<#1073741833>(d1564,b1531):,
u3227<#1073741833>(d1716,b1710):u1719,
u3228"<#1073741833>(d1885,b1874):u3751",
u3754"<#1073741833>(d1880,b1874):u1887,
u3755"<#1073741833>(d1865,b1874):u3752",
u3756"<#1073741833>(d1861,b1874):u3753"]
s1581: IMUL64rri8 [d1582<RAX>(+d3225,d1596,u1592):,
d1583<EFLAGS>!(+d3225,d1595,):d1582, u1584<R12>(+d3220):]
s1585: LEA64r [d1586<RSI>(+d3225,,u3772"):d1583,
u1587<R15>(d776):, u1588<RAX>(d1582):]
s1589: LEA64r [d1590<RDI>(+d3225,,u3771"):d1586,
u1591<R14>(+d3142):u1455, u1592<RAX>(d1582):u1588]
s1593: MOV32r0 [d1594<EAX>(d1582,,):,
d1595<EFLAGS>!(d1583,d1599,):, d1596<RAX>(d1582,,u3770"):d1594]
s1597: MOV32r0 [d1598<ECX>(+d3225,,u3769"):d1590,
d1599<EFLAGS>!(d1595,,u3231"):]
I have used arrows to highlight two nodes. The first node, s1578, def's
d1579<R11>, which has a single reached use in phi node p3224. I am
surprised that this phi node exists and has no reached uses, for two reasons.
First, I built the graph without the KeepDeadPhis option. Shouldn't this
remove phi nodes without reached uses? Second, there clearly is a reached use of
R11 (corresponding to the instruction represented by s1578) in another basic
block:
b1721: --- %bb.50 --- preds(1): %bb.49 succs(1): %bb.51
s1722: COPY [d1723<RSI>(+d3248,,u3765"):d1713,
u1724<R13>(d785):u1546]
---> s1725: COPY [d1726<RDI>(+d3248,,u3764"):d1723,
u1727<R11>(+d3248):]
s1728: MOV32r0 [d1729<EBP>(+d3210,,):,
d1730<EFLAGS>!(d1716,,u3261"):,
d1731<RBP>(+d3210,,u3253):d1729]
I have confirmed via manual inspection and the use of a dynamic analysis tool
that the next use of the R11 def in s1578 is s1725.
Could you please clarify these two points?
Thanks,
Scott
On Mon, Dec 23, 2019 at 12:46 PM Krzysztof Parzyszek <kparzysz at
quicinc.com<mailto:kparzysz at quicinc.com>> wrote:
Hi Scott,
That #1073741833 is a register mask. They are treated as aggregate registers
(essentially sets of registers), so if it includes R9D and R11D, it will be
treated as being aliased with both.
These separate defs are there because they reach disjoint registers.
--
Krzysztof Parzyszek kparzysz at quicinc.com<mailto:kparzysz at
quicinc.com> AI tools development
From: Scott Douglas Constable <sdconsta at syr.edu<mailto:sdconsta at
syr.edu>>
Sent: Monday, December 23, 2019 2:10 PM
To: Scott Douglas Constable <sdconsta at syr.edu<mailto:sdconsta at
syr.edu>>
Cc: Krzysztof Parzyszek <kparzysz at quicinc.com<mailto:kparzysz at
quicinc.com>>; llvm-dev at lists.llvm.org<mailto:llvm-dev at
lists.llvm.org>
Subject: [EXT] Re: [llvm-dev] Register Dataflow Analysis on X86
Revisiting this thread. I have been experimenting with the RDF module on the X86
target. For the most part, building the data-flow graph and following def-use
chains seems to work fine. But I am also observing some strange behavior in the
phi nodes. For example, I have one basic block which begins with the following 4
phi nodes:
b585: --- %bb.25 --- preds(5): %bb.24, %bb.20, %bb.22, %bb.49, %bb.52 succs(2):
%bb.18, %bb.37
p1095: phi [+d1096<EBP>(,d668,):, u1097<EBP>(d540,b477):u555,
u1098<EBP>(d427,b448):u450, u1099<EBP>(d427,b462):u464,
u1100<EBP>(d427,b1009):u1011, u1101<EBP>(d427,b1027):u1029]
p1102: phi [+d1103<R13D>(,,u1075):, u1104<R13D>(d557,b477):u563,
u1105<R13D>(d411,b448):, u1106<R13D>(d411,b462):u459,
u1107<R13D>(d411,b1009):u1106, u1108<R13D>(d411,b1027):u1107]
p1109: phi [+d1110<R14D>(,d625,u612):, u1111<R14D>(d584,b477):,
u1112<R14D>(d452,b448):, u1113<R14D>(d466,b462):,
u1114<R14D>(d1013,b1009):, u1115<R14D>(d1031,b1027):]
p1116: phi [+d1117<#1073741833>(,d645,u648):,
u1118"<#1073741833>(d579,b477):,
u1466"<#1073741833>(d578,b477):,
u1467"<#1073741833>(d569,b477):u581,
u1468"<#1073741833>(d546,b477):,
u1469"<#1073741833>(d543,b477):,
u1470"<#1073741833>(d524,b477):u530,
u1119"<#1073741833>(d453,b448):,
u1436"<#1073741833>(d420,b448):,
u1437"<#1073741833>(d404,b448):u445,
u1120"<#1073741833>(d467,b462):,
u1438"<#1073741833>(d420,b462):u1436",
u1439"<#1073741833>(d404,b462):u473,
u1121"<#1073741833>(d1014,b1009):,
u1440"<#1073741833>(d420,b1009):u1006,
u1441"<#1073741833>(d404,b1009):u1439",
u1122"<#1073741833>(d1032,b1027):,
u1442"<#1073741833>(d420,b1027):u1440",
u1443"<#1073741833>(d404,b1027):u1441"]
The first three make perfect sense to me, and seem to reflect the
post-allocation MIR correctly. The fourth phi node seems entirely composed of
defs and uses for some unnamed register #1073741833 (what exactly is the
significance of unnamed registers?). Moreover, this phi seems to be introducing
false def-use relationships into the DFG. For example, the phi introduces the
following dependency chain, which as far as I can tell is not valid:
// R11D is def'ed, def ID is d524
s523: SUB32rr [d524<R11D>(d519,,u1470"):,
d525<EFLAGS>!(d520,d533,):, u526<R11D>(d519):,
u527<ESI>(d508):]
...
// d524 is used in the phi node to def d1117, corresponding to unnamed register
#1073741833
p1116: phi [+d1117<#1073741833>(,d645,u648):,
u1118"<#1073741833>(d579,b477):,
u1466"<#1073741833>(d578,b477):,
u1467"<#1073741833>(d569,b477):u581,
u1468"<#1073741833>(d546,b477):,
u1469"<#1073741833>(d543,b477):,
u1470"<#1073741833>(d524,b477):u530,
u1119"<#1073741833>(d453,b448):,
u1436"<#1073741833>(d420,b448):,
u1437"<#1073741833>(d404,b448):u445,
u1120"<#1073741833>(d467,b462):,
u1438"<#1073741833>(d420,b462):u1436",
u1439"<#1073741833>(d404,b462):u473,
u1121"<#1073741833>(d1014,b1009):,
u1440"<#1073741833>(d420,b1009):u1006,
u1441"<#1073741833>(d404,b1009):u1439",
u1122"<#1073741833>(d1032,b1027):,
u1442"<#1073741833>(d420,b1027):u1440",
u1443"<#1073741833>(d404,b1027):u1441"]
...
// d1117 is used in def d645 of register R9D
s644: ADD32rr [d645<R9D>(+d1117,d694,u659):d634,
d646<EFLAGS>!(d633,d651,):, u647<R9D>(+d1117):u637,
u648<R9D>(+d1117):u647]
But after examining the corresponding MIR, I do not think that R11D flows into
R9D. So it looks to me as though this phi node is erroneous.
Any help wold be much appreciated!
I'm using the LLVM 8.0.1 release.
On Fri, Nov 8, 2019 at 10:35 AM Scott Douglas Constable via llvm-dev
<llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>>
wrote:
Do you know whether it has been fixed on the 8.0.1 release?
Scott
On Fri, Nov 8, 2019 at 9:45 AM Krzysztof Parzyszek <kparzysz at
quicinc.com<mailto:kparzysz at quicinc.com>> wrote:
The one blocking issue that existed in the past has been fixed. I haven’t had
time to do any work on it lately, but I’m not aware of any fundamental problems
that would make it not work on x86.
--
Krzysztof Parzyszek kparzysz at quicinc.com<mailto:kparzysz at
quicinc.com> AI tools development
From: llvm-dev <llvm-dev-bounces at lists.llvm.org<mailto:llvm-dev-bounces
at lists.llvm.org>> On Behalf Of Scott Douglas Constable via llvm-dev
Sent: Friday, November 8, 2019 10:59 AM
To: llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>
Subject: [EXT] [llvm-dev] Register Dataflow Analysis on X86
I came across this thread from a couple years ago:
http://lists.llvm.org/pipermail/llvm-dev/2017-November/119346.html
Has there been any progress on RDF for X86? Or is there some other preferred
alternative for performing reachability analysis after register allocation?
Thanks,
Scott Constable
_______________________________________________
LLVM Developers mailing list
llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>
https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20200110/222db49d/attachment-0001.html>
scott constable via llvm-dev
2020-Feb-24 23:55 UTC
[llvm-dev] Register Dataflow Analysis on X86
Hi Krzysztof,
I have been using RDF on x86 with a lot of success, though I have
encountered one weird corner case on several occasions in
getLandingPadLiveIns(). I have annotated the code below to highlight the
issue:
RegisterSet DataFlowGraph::getLandingPadLiveIns() const {
RegisterSet LR;
const Function &F = MF.getFunction();
const Constant *PF = F.hasPersonalityFn() ? F.getPersonalityFn() // PF
may be nullptr
: nullptr;
const TargetLowering &TLI = *MF.getSubtarget().getTargetLowering();
if (RegisterId R = TLI.getExceptionPointerRegister(PF))
LR.insert(RegisterRef(R));
if (RegisterId R = TLI.getExceptionSelectorRegister(PF)) // when PF is
nullptr, an assertion fails in the X86 subtarget impl
LR.insert(RegisterRef(R));
return LR;
}
The assertion fail then looks like this:
llvm/lib/Target/X86/X86ISelLowering.cpp:22945: virtual unsigned int
llvm::X86TargetLowering::getExceptionSelectorRegister(const llvm::Constant
*) const: Assertion
`!isFuncletEHPersonality(classifyEHPersonality(PersonalityFn))' failed.
Could you clarify what the issue may be, and how it might be fixed? (BTW I
am using LLVM 8.0.1)
Thanks,
Scott Constable
On Fri, Jan 10, 2020 at 6:02 AM Krzysztof Parzyszek <kparzysz at
quicinc.com>
wrote:
> Hi Scott,
>
> Sorry for the late reply, I was out of office during the holidays.
>
>
>
> 1. A def node can reach either a use node, or another def node. In
> the highlighted phi node (p3224), the def (d3225) reaches another def
> (1598) in statement (s1597), that’s why it’s needed.
> 2. The reason why the def of R11 in s1578 is not connected directly to
> the use in s1725 is that there may be an intervening def between them
(that
> phi node of the register mask may be one such def).
>
>
>
> --
>
> Krzysztof Parzyszek kparzysz at quicinc.com AI tools development
>
>
>
> *From:* Scott Douglas Constable <sdconsta at syr.edu>
> *Sent:* Friday, December 27, 2019 5:58 PM
> *To:* Krzysztof Parzyszek <kparzysz at quicinc.com>
> *Cc:* llvm-dev at lists.llvm.org
> *Subject:* [EXT] Re: [llvm-dev] Register Dataflow Analysis on X86
>
>
>
> Hi Krzysztof,
>
>
>
> Thanks for the reply, I'm starting to understand the graph structure
and
> terminology much better now, especially with the document in RDFGraph.h.
> I'm still a bit confused about some of the behavior I'm seeing with
the phi
> nodes that involve aggregate registers. Here is one example:
>
>
>
> b1531: --- %bb.36 --- preds(2): %bb.35, %bb.128 succs(1): %bb.37
> p3193: phi [+d3194<RBP>(,,u3211):,
u3195<RBP>(+d3170,b1526):u1437,
> u3196<RBP>(d2141,b2486):u2324]
> p3197: phi [+d3198<RBX>(,,u3216):,
u3199<RBX>(+d3138,b1526):u1465,
> u3200<RBX>(+d3364,b2486):]
> p3201: phi [+d3202<R12D>(,d1541,):,
u3203<R12D>(+d3146,b1526):,
> u3204<R12D>(d1878,b2486):u3148]
> p3205: phi [+d3206<#1073741833>(,d1551,u1552):,
> u3207"<#1073741833>(d1521,b1526):u1524,
u3779"<#1073741833>(d1517,b1526):,
> u3780"<#1073741833>(d1513,b1526):u1522,
> u3208"<#1073741833>(d2481,b2486):u2484,
u3695"<#1073741833>(d2477,b2486):,
> u3696"<#1073741833>(d2473,b2486):u2482]
> s1532: ADJCALLSTACKDOWN64
[d1533<RSP>!(+d3206,\~d3647",u1557):,
> d1534<EFLAGS>!(+d3206,d1540,):d1533,
> d1535<SSP>!(+d3206,\~d3646",u1558):d1534,
u1536<RSP>!(+d3206):,
> u1537<SSP>!(+d3206):u1536]
> s1538: MOV32r0 [d1539<R12D>(+d3202,,):,
> d1540<EFLAGS>!(d1534,d1549,):, d1541<R12>(+d3202,,u3221):d1539]
> s1542: MOV32ri64 [d1543<RDX>(+d3206,\~d3645",u1561):d1535]
> s1544: COPY [d1545<RDI>(+d3206,\~d3644",u1559):d1543,
> u1546<R13>(d785):]
> s1547: MOV32r0 [d1548<ESI>(+d3206,\~d3643",u1560):d1545,
> d1549<EFLAGS>!(d1540,\~d3642",):]
> s1550: MOV64rm [d1551<R11>(+d3206,\~d1554",u1562):d1548,
> u1552<RIP>(+d3206):u1537]
> s1553: CALL64pcrel32 __foo
[\~d1554"<#1073741833>!(d1551,d1579,):,
> \~d3642"<#1073741833>!(d1549,,):,
\~d3643"<#1073741833>!(d1548,,):,
> \~d3644"<#1073741833>!(d1545,,):,
\~d3645"<#1073741833>!(d1543,,):,
> \~d3646"<#1073741833>!(d1535,,):,
\~d3647"<#1073741833>!(d1533,,):,
> d1555<RSP>!(\~d1554",d1564,u1567):,
> d1556<SSP>!(\~d1554",d1566,u1568):d1555,
u1557<RSP>!(d1533):,
> u1558<SSP>!(d1535):, u1559<RDI>!(d1545):,
u1560<ESI>!(d1548):,
> u1561<RDX>!(d1543):, u1562<R11>!(d1551):]
> s1563: ADJCALLSTACKUP64 [d1564<RSP>!(d1555,,u3778"):,
> d1565<EFLAGS>!(\~d1554",d1571,):d1556,
d1566<SSP>!(d1556,,u3777"):,
>
> u1567<RSP>!(d1555):, u1568<SSP>!(d1556):]
> s1569: MOV32r0 [d1570<R10D>(\~d1554",,u3776"):d1565,
> d1571<EFLAGS>!(d1565,d1574,):]
> s1572: MOV32r0 [d1573<R8D>(\~d1554",,u3775"):d1570,
> d1574<EFLAGS>!(d1571,d1577,):]
> s1575: MOV32r0 [d1576<R9D>(\~d1554",,u3774"):d1573,
> d1577<EFLAGS>!(d1574,,u3773"):]
> ---> s1578: MOV64rm [d1579<R11>(\~d1554",,u3226"):d1576]
>
>
>
> b1580: --- %bb.37 --- preds(3): %bb.36, %bb.49, %bb.64 succs(1):
> %bb.38
> p3209: phi [+d3210<RBP>(,d1731,u3212):,
u3211<RBP>(+d3194,b1531):,
> u3212<RBP>(+d3210,b1710):, u3213<RBP>(d1857,b1874):u3466]
> p3214: phi [+d3215<RBX>(,,u3217):,
u3216<RBX>(+d3198,b1531):,
> u3217<RBX>(+d3215,b1710):u3257, u3218<RBX>(+d3290,b1874):u3470]
> p3219: phi [+d3220<R12D>(,d1712,u1714):,
u3221<R12D>(d1541,b1531):,
> u3222<R12D>(d1712,b1710):u1717, u3223<R12D>(d1878,b1874):u3204]
> ---> p3224: phi [+d3225<#1073741833>(,d1598,):,
> u3226"<#1073741833>(d1579,b1531):,
u3773"<#1073741833>(d1577,b1531):,
> u3774"<#1073741833>(d1576,b1531):,
u3775"<#1073741833>(d1573,b1531):,
> u3776"<#1073741833>(d1570,b1531):,
u3777"<#1073741833>(d1566,b1531):,
> u3778"<#1073741833>(d1564,b1531):,
u3227<#1073741833>(d1716,b1710):u1719,
> u3228"<#1073741833>(d1885,b1874):u3751",
> u3754"<#1073741833>(d1880,b1874):u1887,
> u3755"<#1073741833>(d1865,b1874):u3752",
> u3756"<#1073741833>(d1861,b1874):u3753"]
> s1581: IMUL64rri8 [d1582<RAX>(+d3225,d1596,u1592):,
> d1583<EFLAGS>!(+d3225,d1595,):d1582, u1584<R12>(+d3220):]
> s1585: LEA64r [d1586<RSI>(+d3225,,u3772"):d1583,
u1587<R15>(d776):,
> u1588<RAX>(d1582):]
> s1589: LEA64r [d1590<RDI>(+d3225,,u3771"):d1586,
> u1591<R14>(+d3142):u1455, u1592<RAX>(d1582):u1588]
> s1593: MOV32r0 [d1594<EAX>(d1582,,):,
d1595<EFLAGS>!(d1583,d1599,):,
> d1596<RAX>(d1582,,u3770"):d1594]
> s1597: MOV32r0 [d1598<ECX>(+d3225,,u3769"):d1590,
> d1599<EFLAGS>!(d1595,,u3231"):]
>
> I have used arrows to highlight two nodes. The first node, s1578, def's
> d1579<R11>, which has a single reached use in phi node p3224. I am
> surprised that this phi node exists and has no reached uses, for two
> reasons. First, I built the graph without the KeepDeadPhis option.
> Shouldn't this remove phi nodes without reached uses? Second, there
clearly
> *is* a reached use of R11 (corresponding to the instruction represented
> by s1578) in another basic block:
>
>
>
> b1721: --- %bb.50 --- preds(1): %bb.49 succs(1): %bb.51
> s1722: COPY [d1723<RSI>(+d3248,,u3765"):d1713,
u1724<R13>(d785):u1546]
> ---> s1725: COPY [d1726<RDI>(+d3248,,u3764"):d1723,
u1727<R11>(+d3248):]
> s1728: MOV32r0 [d1729<EBP>(+d3210,,):,
> d1730<EFLAGS>!(d1716,,u3261"):,
d1731<RBP>(+d3210,,u3253):d1729]
>
>
>
> I have confirmed via manual inspection and the use of a dynamic analysis
> tool that the next use of the R11 def in s1578 is s1725.
>
>
>
> Could you please clarify these two points?
>
>
>
> Thanks,
>
>
>
> Scott
>
>
>
> On Mon, Dec 23, 2019 at 12:46 PM Krzysztof Parzyszek <kparzysz at
quicinc.com>
> wrote:
>
> Hi Scott,
>
> That #1073741833 is a register mask. They are treated as aggregate
> registers (essentially sets of registers), so if it includes R9D and R11D,
> it will be treated as being aliased with both.
>
>
>
> These separate defs are there because they reach disjoint registers.
>
>
>
>
>
> --
>
> Krzysztof Parzyszek kparzysz at quicinc.com AI tools development
>
>
>
> *From:* Scott Douglas Constable <sdconsta at syr.edu>
> *Sent:* Monday, December 23, 2019 2:10 PM
> *To:* Scott Douglas Constable <sdconsta at syr.edu>
> *Cc:* Krzysztof Parzyszek <kparzysz at quicinc.com>; llvm-dev at
lists.llvm.org
> *Subject:* [EXT] Re: [llvm-dev] Register Dataflow Analysis on X86
>
>
>
> Revisiting this thread. I have been experimenting with the RDF module on
> the X86 target. For the most part, building the data-flow graph and
> following def-use chains seems to work fine. But I am also observing some
> strange behavior in the phi nodes. For example, I have one basic block
> which begins with the following 4 phi nodes:
>
>
>
> b585: --- %bb.25 --- preds(5): %bb.24, %bb.20, %bb.22, %bb.49, %bb.52
> succs(2): %bb.18, %bb.37
> p1095: phi [+d1096<EBP>(,d668,):, u1097<EBP>(d540,b477):u555,
> u1098<EBP>(d427,b448):u450, u1099<EBP>(d427,b462):u464,
> u1100<EBP>(d427,b1009):u1011, u1101<EBP>(d427,b1027):u1029]
> p1102: phi [+d1103<R13D>(,,u1075):,
u1104<R13D>(d557,b477):u563,
> u1105<R13D>(d411,b448):, u1106<R13D>(d411,b462):u459,
> u1107<R13D>(d411,b1009):u1106, u1108<R13D>(d411,b1027):u1107]
> p1109: phi [+d1110<R14D>(,d625,u612):, u1111<R14D>(d584,b477):,
> u1112<R14D>(d452,b448):, u1113<R14D>(d466,b462):,
> u1114<R14D>(d1013,b1009):, u1115<R14D>(d1031,b1027):]
> p1116: phi [+d1117<#1073741833>(,d645,u648):,
> u1118"<#1073741833>(d579,b477):,
u1466"<#1073741833>(d578,b477):,
> u1467"<#1073741833>(d569,b477):u581,
u1468"<#1073741833>(d546,b477):,
> u1469"<#1073741833>(d543,b477):,
u1470"<#1073741833>(d524,b477):u530,
> u1119"<#1073741833>(d453,b448):,
u1436"<#1073741833>(d420,b448):,
> u1437"<#1073741833>(d404,b448):u445,
u1120"<#1073741833>(d467,b462):,
> u1438"<#1073741833>(d420,b462):u1436",
u1439"<#1073741833>(d404,b462):u473,
> u1121"<#1073741833>(d1014,b1009):,
u1440"<#1073741833>(d420,b1009):u1006,
> u1441"<#1073741833>(d404,b1009):u1439",
u1122"<#1073741833>(d1032,b1027):,
> u1442"<#1073741833>(d420,b1027):u1440",
> u1443"<#1073741833>(d404,b1027):u1441"]
>
>
>
> The first three make perfect sense to me, and seem to reflect the
> post-allocation MIR correctly. The fourth phi node seems entirely composed
> of defs and uses for some unnamed register #1073741833 (what exactly is the
> significance of unnamed registers?). Moreover, this phi seems to be
> introducing false def-use relationships into the DFG. For example, the phi
> introduces the following dependency chain, which as far as I can tell is
> not valid:
>
>
>
> // R11D is def'ed, def ID is d524
>
> s523: SUB32rr [d524<R11D>(d519,,u1470"):,
d525<EFLAGS>!(d520,d533,):,
> u526<R11D>(d519):, u527<ESI>(d508):]
> ...
>
> // d524 is used in the phi node to def d1117, corresponding to unnamed
> register #1073741833
> p1116: phi [+d1117<#1073741833>(,d645,u648):,
> u1118"<#1073741833>(d579,b477):,
u1466"<#1073741833>(d578,b477):,
> u1467"<#1073741833>(d569,b477):u581,
u1468"<#1073741833>(d546,b477):,
> u1469"<#1073741833>(d543,b477):,
u1470"<#1073741833>(d524,b477):u530,
> u1119"<#1073741833>(d453,b448):,
u1436"<#1073741833>(d420,b448):,
> u1437"<#1073741833>(d404,b448):u445,
u1120"<#1073741833>(d467,b462):,
> u1438"<#1073741833>(d420,b462):u1436",
u1439"<#1073741833>(d404,b462):u473,
> u1121"<#1073741833>(d1014,b1009):,
u1440"<#1073741833>(d420,b1009):u1006,
> u1441"<#1073741833>(d404,b1009):u1439",
u1122"<#1073741833>(d1032,b1027):,
> u1442"<#1073741833>(d420,b1027):u1440",
> u1443"<#1073741833>(d404,b1027):u1441"]
> ...
>
> // d1117 is used in def d645 of register R9D
> s644: ADD32rr [d645<R9D>(+d1117,d694,u659):d634,
> d646<EFLAGS>!(d633,d651,):, u647<R9D>(+d1117):u637,
u648<R9D>(+d1117):u647]
>
>
>
> But after examining the corresponding MIR, I do not think that R11D flows
> into R9D. So it looks to me as though this phi node is erroneous.
>
>
>
> Any help wold be much appreciated!
>
>
>
> I'm using the LLVM 8.0.1 release.
>
>
>
> On Fri, Nov 8, 2019 at 10:35 AM Scott Douglas Constable via llvm-dev <
> llvm-dev at lists.llvm.org> wrote:
>
> Do you know whether it has been fixed on the 8.0.1 release?
>
>
>
> Scott
>
>
>
> On Fri, Nov 8, 2019 at 9:45 AM Krzysztof Parzyszek <kparzysz at
quicinc.com>
> wrote:
>
> The one blocking issue that existed in the past has been fixed. I haven’t
> had time to do any work on it lately, but I’m not aware of any fundamental
> problems that would make it not work on x86.
>
>
>
> --
>
> Krzysztof Parzyszek kparzysz at quicinc.com AI tools development
>
>
>
> *From:* llvm-dev <llvm-dev-bounces at lists.llvm.org> *On Behalf Of
*Scott
> Douglas Constable via llvm-dev
> *Sent:* Friday, November 8, 2019 10:59 AM
> *To:* llvm-dev at lists.llvm.org
> *Subject:* [EXT] [llvm-dev] Register Dataflow Analysis on X86
>
>
>
> I came across this thread from a couple years ago:
>
>
>
> http://lists.llvm.org/pipermail/llvm-dev/2017-November/119346.html
>
>
>
> Has there been any progress on RDF for X86? Or is there some other
> preferred alternative for performing reachability analysis after register
> allocation?
>
>
>
> Thanks,
>
>
>
> Scott Constable
>
> _______________________________________________
> LLVM Developers mailing list
> llvm-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20200224/00ed073d/attachment.html>
Krzysztof Parzyszek via llvm-dev
2020-Feb-25 13:35 UTC
[llvm-dev] Register Dataflow Analysis on X86
Hi Scott,
This code is trying to collect the registers that are live-in on entry to the
landing pad. As you probably know, the landing pads are where the exception
handling runtime jumps back into the function, so they are something like
additional entry points. As such, they have some set of live-in registers as
defined by some calling convention (or more likely exception handling
convention). All this code does is trying to find out what these registers are.
What this assertion reflects is really my lack of familiarity with these
conventions for x86. This function is kind of “one size fits all”, i.e. “do the
same thing for all cases”, which is evidently not sufficient. The proper fix
would be to identify the applicable calling convention for a particular case and
set the live-in registers appropriately.
Here’s a document about exception handling in LLVM with some information about
landing pads and funclets: the actual registers depend on the target OS
(Linux/Windows), and also on the architecture (I’m guessing this is 32- vs
64-bit).
https://llvm.org/docs/ExceptionHandling.html
I’m happy to hear that you’re funding RDF useful.
--
Krzysztof Parzyszek kparzysz at quicinc.com<mailto:kparzysz at
quicinc.com> AI tools development
From: scott constable <sdconsta at syr.edu>
Sent: Monday, February 24, 2020 5:55 PM
To: Krzysztof Parzyszek <kparzysz at quicinc.com>; llvm-dev at
lists.llvm.org
Subject: [EXT] Re: [llvm-dev] Register Dataflow Analysis on X86
Hi Krzysztof,
I have been using RDF on x86 with a lot of success, though I have encountered
one weird corner case on several occasions in getLandingPadLiveIns(). I have
annotated the code below to highlight the issue:
RegisterSet DataFlowGraph::getLandingPadLiveIns() const {
RegisterSet LR;
const Function &F = MF.getFunction();
const Constant *PF = F.hasPersonalityFn() ? F.getPersonalityFn() // PF may be
nullptr
: nullptr;
const TargetLowering &TLI = *MF.getSubtarget().getTargetLowering();
if (RegisterId R = TLI.getExceptionPointerRegister(PF))
LR.insert(RegisterRef(R));
if (RegisterId R = TLI.getExceptionSelectorRegister(PF)) // when PF is
nullptr, an assertion fails in the X86 subtarget impl
LR.insert(RegisterRef(R));
return LR;
}
The assertion fail then looks like this:
llvm/lib/Target/X86/X86ISelLowering.cpp:22945: virtual unsigned int
llvm::X86TargetLowering::getExceptionSelectorRegister(const llvm::Constant *)
const: Assertion
`!isFuncletEHPersonality(classifyEHPersonality(PersonalityFn))' failed.
Could you clarify what the issue may be, and how it might be fixed? (BTW I am
using LLVM 8.0.1)
Thanks,
Scott Constable
On Fri, Jan 10, 2020 at 6:02 AM Krzysztof Parzyszek <kparzysz at
quicinc.com<mailto:kparzysz at quicinc.com>> wrote:
Hi Scott,
Sorry for the late reply, I was out of office during the holidays.
1. A def node can reach either a use node, or another def node. In the
highlighted phi node (p3224), the def (d3225) reaches another def (1598) in
statement (s1597), that’s why it’s needed.
2. The reason why the def of R11 in s1578 is not connected directly to the
use in s1725 is that there may be an intervening def between them (that phi node
of the register mask may be one such def).
--
Krzysztof Parzyszek kparzysz at quicinc.com<mailto:kparzysz at
quicinc.com> AI tools development
From: Scott Douglas Constable <sdconsta at syr.edu<mailto:sdconsta at
syr.edu>>
Sent: Friday, December 27, 2019 5:58 PM
To: Krzysztof Parzyszek <kparzysz at quicinc.com<mailto:kparzysz at
quicinc.com>>
Cc: llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>
Subject: [EXT] Re: [llvm-dev] Register Dataflow Analysis on X86
Hi Krzysztof,
Thanks for the reply, I'm starting to understand the graph structure and
terminology much better now, especially with the document in RDFGraph.h. I'm
still a bit confused about some of the behavior I'm seeing with the phi
nodes that involve aggregate registers. Here is one example:
b1531: --- %bb.36 --- preds(2): %bb.35, %bb.128 succs(1): %bb.37
p3193: phi [+d3194<RBP>(,,u3211):,
u3195<RBP>(+d3170,b1526):u1437, u3196<RBP>(d2141,b2486):u2324]
p3197: phi [+d3198<RBX>(,,u3216):,
u3199<RBX>(+d3138,b1526):u1465, u3200<RBX>(+d3364,b2486):]
p3201: phi [+d3202<R12D>(,d1541,):, u3203<R12D>(+d3146,b1526):,
u3204<R12D>(d1878,b2486):u3148]
p3205: phi [+d3206<#1073741833>(,d1551,u1552):,
u3207"<#1073741833>(d1521,b1526):u1524,
u3779"<#1073741833>(d1517,b1526):,
u3780"<#1073741833>(d1513,b1526):u1522,
u3208"<#1073741833>(d2481,b2486):u2484,
u3695"<#1073741833>(d2477,b2486):,
u3696"<#1073741833>(d2473,b2486):u2482]
s1532: ADJCALLSTACKDOWN64 [d1533<RSP>!(+d3206,\~d3647",u1557):,
d1534<EFLAGS>!(+d3206,d1540,):d1533,
d1535<SSP>!(+d3206,\~d3646",u1558):d1534, u1536<RSP>!(+d3206):,
u1537<SSP>!(+d3206):u1536]
s1538: MOV32r0 [d1539<R12D>(+d3202,,):,
d1540<EFLAGS>!(d1534,d1549,):, d1541<R12>(+d3202,,u3221):d1539]
s1542: MOV32ri64 [d1543<RDX>(+d3206,\~d3645",u1561):d1535]
s1544: COPY [d1545<RDI>(+d3206,\~d3644",u1559):d1543,
u1546<R13>(d785):]
s1547: MOV32r0 [d1548<ESI>(+d3206,\~d3643",u1560):d1545,
d1549<EFLAGS>!(d1540,\~d3642",):]
s1550: MOV64rm [d1551<R11>(+d3206,\~d1554",u1562):d1548,
u1552<RIP>(+d3206):u1537]
s1553: CALL64pcrel32 __foo
[\~d1554"<#1073741833>!(d1551,d1579,):,
\~d3642"<#1073741833>!(d1549,,):,
\~d3643"<#1073741833>!(d1548,,):,
\~d3644"<#1073741833>!(d1545,,):,
\~d3645"<#1073741833>!(d1543,,):,
\~d3646"<#1073741833>!(d1535,,):,
\~d3647"<#1073741833>!(d1533,,):,
d1555<RSP>!(\~d1554",d1564,u1567):,
d1556<SSP>!(\~d1554",d1566,u1568):d1555, u1557<RSP>!(d1533):,
u1558<SSP>!(d1535):, u1559<RDI>!(d1545):, u1560<ESI>!(d1548):,
u1561<RDX>!(d1543):, u1562<R11>!(d1551):]
s1563: ADJCALLSTACKUP64 [d1564<RSP>!(d1555,,u3778"):,
d1565<EFLAGS>!(\~d1554",d1571,):d1556,
d1566<SSP>!(d1556,,u3777"):,
u1567<RSP>!(d1555):, u1568<SSP>!(d1556):]
s1569: MOV32r0 [d1570<R10D>(\~d1554",,u3776"):d1565,
d1571<EFLAGS>!(d1565,d1574,):]
s1572: MOV32r0 [d1573<R8D>(\~d1554",,u3775"):d1570,
d1574<EFLAGS>!(d1571,d1577,):]
s1575: MOV32r0 [d1576<R9D>(\~d1554",,u3774"):d1573,
d1577<EFLAGS>!(d1574,,u3773"):]
---> s1578: MOV64rm [d1579<R11>(\~d1554",,u3226"):d1576]
b1580: --- %bb.37 --- preds(3): %bb.36, %bb.49, %bb.64 succs(1): %bb.38
p3209: phi [+d3210<RBP>(,d1731,u3212):,
u3211<RBP>(+d3194,b1531):, u3212<RBP>(+d3210,b1710):,
u3213<RBP>(d1857,b1874):u3466]
p3214: phi [+d3215<RBX>(,,u3217):, u3216<RBX>(+d3198,b1531):,
u3217<RBX>(+d3215,b1710):u3257, u3218<RBX>(+d3290,b1874):u3470]
p3219: phi [+d3220<R12D>(,d1712,u1714):,
u3221<R12D>(d1541,b1531):, u3222<R12D>(d1712,b1710):u1717,
u3223<R12D>(d1878,b1874):u3204]
---> p3224: phi [+d3225<#1073741833>(,d1598,):,
u3226"<#1073741833>(d1579,b1531):,
u3773"<#1073741833>(d1577,b1531):,
u3774"<#1073741833>(d1576,b1531):,
u3775"<#1073741833>(d1573,b1531):,
u3776"<#1073741833>(d1570,b1531):,
u3777"<#1073741833>(d1566,b1531):,
u3778"<#1073741833>(d1564,b1531):,
u3227<#1073741833>(d1716,b1710):u1719,
u3228"<#1073741833>(d1885,b1874):u3751",
u3754"<#1073741833>(d1880,b1874):u1887,
u3755"<#1073741833>(d1865,b1874):u3752",
u3756"<#1073741833>(d1861,b1874):u3753"]
s1581: IMUL64rri8 [d1582<RAX>(+d3225,d1596,u1592):,
d1583<EFLAGS>!(+d3225,d1595,):d1582, u1584<R12>(+d3220):]
s1585: LEA64r [d1586<RSI>(+d3225,,u3772"):d1583,
u1587<R15>(d776):, u1588<RAX>(d1582):]
s1589: LEA64r [d1590<RDI>(+d3225,,u3771"):d1586,
u1591<R14>(+d3142):u1455, u1592<RAX>(d1582):u1588]
s1593: MOV32r0 [d1594<EAX>(d1582,,):,
d1595<EFLAGS>!(d1583,d1599,):, d1596<RAX>(d1582,,u3770"):d1594]
s1597: MOV32r0 [d1598<ECX>(+d3225,,u3769"):d1590,
d1599<EFLAGS>!(d1595,,u3231"):]
I have used arrows to highlight two nodes. The first node, s1578, def's
d1579<R11>, which has a single reached use in phi node p3224. I am
surprised that this phi node exists and has no reached uses, for two reasons.
First, I built the graph without the KeepDeadPhis option. Shouldn't this
remove phi nodes without reached uses? Second, there clearly is a reached use of
R11 (corresponding to the instruction represented by s1578) in another basic
block:
b1721: --- %bb.50 --- preds(1): %bb.49 succs(1): %bb.51
s1722: COPY [d1723<RSI>(+d3248,,u3765"):d1713,
u1724<R13>(d785):u1546]
---> s1725: COPY [d1726<RDI>(+d3248,,u3764"):d1723,
u1727<R11>(+d3248):]
s1728: MOV32r0 [d1729<EBP>(+d3210,,):,
d1730<EFLAGS>!(d1716,,u3261"):,
d1731<RBP>(+d3210,,u3253):d1729]
I have confirmed via manual inspection and the use of a dynamic analysis tool
that the next use of the R11 def in s1578 is s1725.
Could you please clarify these two points?
Thanks,
Scott
On Mon, Dec 23, 2019 at 12:46 PM Krzysztof Parzyszek <kparzysz at
quicinc.com<mailto:kparzysz at quicinc.com>> wrote:
Hi Scott,
That #1073741833 is a register mask. They are treated as aggregate registers
(essentially sets of registers), so if it includes R9D and R11D, it will be
treated as being aliased with both.
These separate defs are there because they reach disjoint registers.
--
Krzysztof Parzyszek kparzysz at quicinc.com<mailto:kparzysz at
quicinc.com> AI tools development
From: Scott Douglas Constable <sdconsta at syr.edu<mailto:sdconsta at
syr.edu>>
Sent: Monday, December 23, 2019 2:10 PM
To: Scott Douglas Constable <sdconsta at syr.edu<mailto:sdconsta at
syr.edu>>
Cc: Krzysztof Parzyszek <kparzysz at quicinc.com<mailto:kparzysz at
quicinc.com>>; llvm-dev at lists.llvm.org<mailto:llvm-dev at
lists.llvm.org>
Subject: [EXT] Re: [llvm-dev] Register Dataflow Analysis on X86
Revisiting this thread. I have been experimenting with the RDF module on the X86
target. For the most part, building the data-flow graph and following def-use
chains seems to work fine. But I am also observing some strange behavior in the
phi nodes. For example, I have one basic block which begins with the following 4
phi nodes:
b585: --- %bb.25 --- preds(5): %bb.24, %bb.20, %bb.22, %bb.49, %bb.52 succs(2):
%bb.18, %bb.37
p1095: phi [+d1096<EBP>(,d668,):, u1097<EBP>(d540,b477):u555,
u1098<EBP>(d427,b448):u450, u1099<EBP>(d427,b462):u464,
u1100<EBP>(d427,b1009):u1011, u1101<EBP>(d427,b1027):u1029]
p1102: phi [+d1103<R13D>(,,u1075):, u1104<R13D>(d557,b477):u563,
u1105<R13D>(d411,b448):, u1106<R13D>(d411,b462):u459,
u1107<R13D>(d411,b1009):u1106, u1108<R13D>(d411,b1027):u1107]
p1109: phi [+d1110<R14D>(,d625,u612):, u1111<R14D>(d584,b477):,
u1112<R14D>(d452,b448):, u1113<R14D>(d466,b462):,
u1114<R14D>(d1013,b1009):, u1115<R14D>(d1031,b1027):]
p1116: phi [+d1117<#1073741833>(,d645,u648):,
u1118"<#1073741833>(d579,b477):,
u1466"<#1073741833>(d578,b477):,
u1467"<#1073741833>(d569,b477):u581,
u1468"<#1073741833>(d546,b477):,
u1469"<#1073741833>(d543,b477):,
u1470"<#1073741833>(d524,b477):u530,
u1119"<#1073741833>(d453,b448):,
u1436"<#1073741833>(d420,b448):,
u1437"<#1073741833>(d404,b448):u445,
u1120"<#1073741833>(d467,b462):,
u1438"<#1073741833>(d420,b462):u1436",
u1439"<#1073741833>(d404,b462):u473,
u1121"<#1073741833>(d1014,b1009):,
u1440"<#1073741833>(d420,b1009):u1006,
u1441"<#1073741833>(d404,b1009):u1439",
u1122"<#1073741833>(d1032,b1027):,
u1442"<#1073741833>(d420,b1027):u1440",
u1443"<#1073741833>(d404,b1027):u1441"]
The first three make perfect sense to me, and seem to reflect the
post-allocation MIR correctly. The fourth phi node seems entirely composed of
defs and uses for some unnamed register #1073741833 (what exactly is the
significance of unnamed registers?). Moreover, this phi seems to be introducing
false def-use relationships into the DFG. For example, the phi introduces the
following dependency chain, which as far as I can tell is not valid:
// R11D is def'ed, def ID is d524
s523: SUB32rr [d524<R11D>(d519,,u1470"):,
d525<EFLAGS>!(d520,d533,):, u526<R11D>(d519):,
u527<ESI>(d508):]
...
// d524 is used in the phi node to def d1117, corresponding to unnamed register
#1073741833
p1116: phi [+d1117<#1073741833>(,d645,u648):,
u1118"<#1073741833>(d579,b477):,
u1466"<#1073741833>(d578,b477):,
u1467"<#1073741833>(d569,b477):u581,
u1468"<#1073741833>(d546,b477):,
u1469"<#1073741833>(d543,b477):,
u1470"<#1073741833>(d524,b477):u530,
u1119"<#1073741833>(d453,b448):,
u1436"<#1073741833>(d420,b448):,
u1437"<#1073741833>(d404,b448):u445,
u1120"<#1073741833>(d467,b462):,
u1438"<#1073741833>(d420,b462):u1436",
u1439"<#1073741833>(d404,b462):u473,
u1121"<#1073741833>(d1014,b1009):,
u1440"<#1073741833>(d420,b1009):u1006,
u1441"<#1073741833>(d404,b1009):u1439",
u1122"<#1073741833>(d1032,b1027):,
u1442"<#1073741833>(d420,b1027):u1440",
u1443"<#1073741833>(d404,b1027):u1441"]
...
// d1117 is used in def d645 of register R9D
s644: ADD32rr [d645<R9D>(+d1117,d694,u659):d634,
d646<EFLAGS>!(d633,d651,):, u647<R9D>(+d1117):u637,
u648<R9D>(+d1117):u647]
But after examining the corresponding MIR, I do not think that R11D flows into
R9D. So it looks to me as though this phi node is erroneous.
Any help wold be much appreciated!
I'm using the LLVM 8.0.1 release.
On Fri, Nov 8, 2019 at 10:35 AM Scott Douglas Constable via llvm-dev
<llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>>
wrote:
Do you know whether it has been fixed on the 8.0.1 release?
Scott
On Fri, Nov 8, 2019 at 9:45 AM Krzysztof Parzyszek <kparzysz at
quicinc.com<mailto:kparzysz at quicinc.com>> wrote:
The one blocking issue that existed in the past has been fixed. I haven’t had
time to do any work on it lately, but I’m not aware of any fundamental problems
that would make it not work on x86.
--
Krzysztof Parzyszek kparzysz at quicinc.com<mailto:kparzysz at
quicinc.com> AI tools development
From: llvm-dev <llvm-dev-bounces at lists.llvm.org<mailto:llvm-dev-bounces
at lists.llvm.org>> On Behalf Of Scott Douglas Constable via llvm-dev
Sent: Friday, November 8, 2019 10:59 AM
To: llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>
Subject: [EXT] [llvm-dev] Register Dataflow Analysis on X86
I came across this thread from a couple years ago:
http://lists.llvm.org/pipermail/llvm-dev/2017-November/119346.html
Has there been any progress on RDF for X86? Or is there some other preferred
alternative for performing reachability analysis after register allocation?
Thanks,
Scott Constable
_______________________________________________
LLVM Developers mailing list
llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>
https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20200225/9f7ef315/attachment-0001.html>