llvm dev - Dec 2011 - [LLVMdev] R: Re: LLVM-3.0 fails to build on linux ppc32

>Da: hfinkel at anl.gov
>Data: 02/12/2011 16.27
>A: "acrux_it at libero.it"<acrux_it at libero.it>
>Cc: <llvmdev at cs.uiuc.edu>
>Ogg: Re: [LLVMdev] LLVM-3.0 fails to build on linux ppc32
>
>On Fri, 2011-12-02 at 09:15 -0600, Hal Finkel wrote:
>> On Fri, 2011-12-02 at 06:58 -0600, Hal Finkel wrote:
>> > Nico,
>> > 
>> > There is a third place that '#undef PPC' is needed (at the
top of
>> > PPCFixupKinds.h). Alternatively, you can run configure with -UPPC
in
>> > your CPPFLAGS. I'll try to get this fixed in trunk shortly.
>> 
>> I just tested this, and I was wrong: passing -UPPC to configure in
>> CPPFLAGS does not work for some reason. Providing CPPFLAGS=-UPPC as an
>> argument to make, however, does seem to work.
>> 
>> $ make CPPFLAGS=-UPPC
>
>Unfortunately, this also causes problems. This seems better:
>
>$ make CXX='g++ -UPPC'
>
>(where g++ should be whatever your original CXX was).
>

ciao Hal,
thanks a lot for your support.
i'll try your last suggestion.

Btw, adding -UPPC to my system cxx flags i.e.:
export CXXFLAGS="$CXXFLAGS -UPPC"

i got, instead,  some tests error:

  Expected Passes    : 5565
  Expected Failures  : 48
  Unsupported Tests  : 15
  Unexpected Failures: 28
make[1]: *** [check-local-lit] Error 1
make[1]: Leaving directory `/mnt/EXT/00/llvm/work/src/llvm-3.0.src/test'
make: *** [check] Error 2



cheers,
--nico

On Fri, 2011-12-02 at 20:18 +0100, acrux_it at libero.it
wrote:
> >Da: hfinkel at anl.gov
> >Data: 02/12/2011 16.27
> >A: "acrux_it at libero.it"<acrux_it at libero.it>
> >Cc: <llvmdev at cs.uiuc.edu>
> >Ogg: Re: [LLVMdev] LLVM-3.0 fails to build on linux ppc32
> >
> >On Fri, 2011-12-02 at 09:15 -0600, Hal Finkel wrote:
> >> On Fri, 2011-12-02 at 06:58 -0600, Hal Finkel wrote:
> >> > Nico,
> >> > 
> >> > There is a third place that '#undef PPC' is needed
(at the top of
> >> > PPCFixupKinds.h). Alternatively, you can run configure with
-UPPC in
> >> > your CPPFLAGS. I'll try to get this fixed in trunk
shortly.
> >> 
> >> I just tested this, and I was wrong: passing -UPPC to configure in
> >> CPPFLAGS does not work for some reason. Providing CPPFLAGS=-UPPC
as an
> >> argument to make, however, does seem to work.
> >> 
> >> $ make CPPFLAGS=-UPPC
> >
> >Unfortunately, this also causes problems. This seems better:
> >
> >$ make CXX='g++ -UPPC'
> >
> >(where g++ should be whatever your original CXX was).
> >
> 
> 
> ciao Hal,
> thanks a lot for your support.
> i'll try your last suggestion.
> 
> Btw, adding -UPPC to my system cxx flags i.e.:
> export CXXFLAGS="$CXXFLAGS -UPPC"
> 
> i got, instead,  some tests error:
Indeed; it appears that JIT is broken on PPC/Linux, and so the tests
that actually try to run code fail. I'll look at this in greater detail
when I have some time.

 -Hal
> 
>   Expected Passes    : 5565
>   Expected Failures  : 48
>   Unsupported Tests  : 15
>   Unexpected Failures: 28
> make[1]: *** [check-local-lit] Error 1
> make[1]: Leaving directory
`/mnt/EXT/00/llvm/work/src/llvm-3.0.src/test'
> make: *** [check] Error 2
> 
> 
> 
> cheers,
> --nico
> 
-- 
Hal Finkel
Postdoctoral Appointee
Leadership Computing Facility
Argonne National Laboratory

On Fri, 02 Dec 2011 13:23:07 -0600
Hal Finkel <hfinkel at anl.gov> wrote:

_omissis__
> > 
> > ciao Hal,
> > thanks a lot for your support.
> > i'll try your last suggestion.
> > 
> > Btw, adding -UPPC to my system cxx flags i.e.:
> > export CXXFLAGS="$CXXFLAGS -UPPC"
> > 
> > i got, instead,  some tests error:
> 
> Indeed; it appears that JIT is broken on PPC/Linux, and so the tests
> that actually try to run code fail. I'll look at this in greater
> detail when I have some time.
> 
>  -Hal
> 
> > 
> >   Expected Passes    : 5565
> >   Expected Failures  : 48
> >   Unsupported Tests  : 15
> >   Unexpected Failures: 28
> > make[1]: *** [check-local-lit] Error 1
> > make[1]: Leaving directory
> > `/mnt/EXT/00/llvm/work/src/llvm-3.0.src/test' make: *** [check]
> > Error 2
> > 
hi Hal,
did you already opened a bug ticket ?


cheers,
--nico
-- 
GNU/Linux on Power Architecture
CRUX PPC - http://cruxppc.org/