thr3ads.net - Linux Virtualization - [PATCH v9 06/17] vhost: take worker or vq for flushing [Jun 2023]

If this information is useful, please help other people find it:
Share via:

Mike Christie

2023-Jun-26 23:22 UTC

[PATCH v9 00/17] vhost: multiple worker support

The following patches were built over Linux's tree. The also apply over
the mst vhost branch if you revert the previous vhost worker patchset.

The patches allow us to support multiple vhost workers tasks per device.
The design is a modified version of Stefan's original idea where userspace
has the kernel create a worker and we pass back the pid. In this version
instead of passing the pid between user/kernel space we use a worker_id
which is just an integer managed by the vhost driver and we allow
userspace to create and free workers and then attach them to virtqueues
at setup time.

All review comments from the past reviews should be handled. If I didn't
reply to a review comment, I agreed with the comment and should have
handled it in this posting. Let me know if I missed one.

Results:
--------

fio jobs        1       2       4       8       12      16
----------------------------------------------------------
1 worker        160k   488k     -       -       -       -
worker per vq   160k   310k    620k    1182K    1564K   2002k

Notes:
0. This used a simple fio command:

fio --filename=/dev/sdb  --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128  --numjobs=$JOBS_ABOVE

and I used a VM with 16 vCPUs and 16 virtqueues.

1. The patches were tested with LIO's emulate_pr=0 which drops the
LIO PR lock use. This was a bottleneck at around 12 vqs/jobs.

2. Because we have a hard limit of 1024 cmds, if the num jobs * iodepth
was greater than 1024, I would decrease iodepth. So 12 jobs used 85 cmds,
and 16 used 64.

3. The perf issue above at 2 jobs is because when we only have 1 worker
we execute more cmds per vhost_work due to all vqs funneling to one worker.
I have 2 patches that fix this. One is just submit from the worker thread
instead of kikcing off to a workqueue like how the vhost block patches do.
I'll post this after the worker support is merged. I'm also working on
patches to add back batching during lio completion and do polling on the
submission side.

We will still want the threading patches, because if we batch at the fio
level plus use the vhost theading patches, we can see a big boost like
below. So hopefully doing it at the kernel will allow apps to just work
without having to be smart like fio.

fio using io_uring and batching with the iodepth_batch* settings:

fio jobs        1       2       4       8       12      16
-------------------------------------------------------------
1 worker        494k    520k    -       -       -       -
worker per vq   496k    878k    1542k   2436k   2304k   2590k

V9:
- Fix vhost_dev_reset_owner handling. Make sure a virtqueue's
worker is cleared so when the vhost_dev is reused the old worker is
not used.
- Remove old/unused attach ioctl copy to user code.

V8:
- Rebase.
- Move comments about assumptions so it's in the body of the code
instead of top of function so it's more clear.
- Added patch for RCU support and swapping workers while works are
running.

V7:
- Add more comments about assumptions.
- Drop refcounting and just use an attachment_cnt variable, so there
is no confusion about when a worker is freed.
- Do a opt-in model, because vsiock has an issue where it can queue works
before it's running and it doesn't even need multiple workers, so there
is no point in chaning the driver or core code.
- Add back get worker ioctl.
- Broke up last patches to make it easier to read.

V6:
- Rebase against vhost_task patchset.
- Used xa instead of idr.

V5:
- Rebase against user_worker patchset.
- Rebase against flush patchset.
- Redo vhost-scsi tmf flush handling so it doesn't access vq->worker.

V4:
- fix vhost-sock VSOCK_VQ_RX use.
- name functions called directly by ioctl cmd's to match the ioctl cmd.
- break up VHOST_SET_VRING_WORKER into a new, free and attach cmd.
- document worker lifetime, and cgroup, namespace, mm, rlimit
inheritance, make it clear we currently only support sharing within the
device.
- add support to attach workers while IO is running.
- instead of passing a pid_t of the kernel thread, pass a int allocated
by the vhost layer with an idr.

V3:
- fully convert vhost code to use vq based APIs instead of leaving it
half per dev and half per vq.
- rebase against kernel worker API.
- Drop delayed worker creation. We always create the default worker at
VHOST_SET_OWNER time. Userspace can create and bind workers after that.

V2:
- change loop that we take a refcount to the worker in
- replaced pid == -1 with define.
- fixed tabbing/spacing coding style issue
- use hash instead of list to lookup workers.
- I dropped the patch that added an ioctl cmd to get a vq's worker's
pid. I saw we might do a generic netlink interface instead.

Mike Christie

2023-Jun-26 23:22 UTC

head link

[PATCH v9 01/17] vhost: create worker at end of vhost_dev_set_owner

vsock can start queueing work after VHOST_VSOCK_SET_GUEST_CID, so
after we have called vhost_worker_create it can be calling
vhost_work_queue and trying to access the vhost worker/task. If
vhost_dev_alloc_iovecs fails, then vhost_worker_free could free
the worker/task from under vsock.

This moves vhost_worker_create to the end of vhost_dev_set_owner
where we know we can no longer fail in that path. If it fails
after the VHOST_SET_OWNER and userspace closes the device, then
the normal vsock release handling will do the right thing.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/vhost.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 60c9ebd629dd..82966ffb4a5c 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -572,20 +572,27 @@ long vhost_dev_set_owner(struct vhost_dev *dev)
 
 	vhost_attach_mm(dev);
 
+	err = vhost_dev_alloc_iovecs(dev);
+	if (err)
+		goto err_iovecs;
+
 	if (dev->use_worker) {
+		/*
+		 * This should be done last, because vsock can queue work
+		 * before VHOST_SET_OWNER so it simplifies the failure path
+		 * below since we don't have to worry about vsock queueing
+		 * while we free the worker.
+		 */
 		err = vhost_worker_create(dev);
 		if (err)
 			goto err_worker;
 	}
 
-	err = vhost_dev_alloc_iovecs(dev);
-	if (err)
-		goto err_iovecs;
-
 	return 0;
-err_iovecs:
-	vhost_worker_free(dev);
+
 err_worker:
+	vhost_dev_free_iovecs(dev);
+err_iovecs:
 	vhost_detach_mm(dev);
 err_mm:
 	return err;
-- 
2.25.1

Mike Christie

2023-Jun-26 23:22 UTC

head link

[PATCH v9 02/17] vhost: dynamically allocate vhost_worker

This patchset allows us to allocate multiple workers, so this has us
move from the vhost_worker that's embedded in the vhost_dev to
dynamically allocating it.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/vhost.c | 66 ++++++++++++++++++++++++++++---------------
 drivers/vhost/vhost.h |  4 +--
 2 files changed, 45 insertions(+), 25 deletions(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 82966ffb4a5c..dfd96cf6a152 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -235,36 +235,40 @@ void vhost_dev_flush(struct vhost_dev *dev)
 {
 	struct vhost_flush_struct flush;
 
-	if (dev->worker.vtsk) {
-		init_completion(&flush.wait_event);
-		vhost_work_init(&flush.work, vhost_flush_work);
+	init_completion(&flush.wait_event);
+	vhost_work_init(&flush.work, vhost_flush_work);
 
-		vhost_work_queue(dev, &flush.work);
+	if (vhost_work_queue(dev, &flush.work))
 		wait_for_completion(&flush.wait_event);
-	}
 }
 EXPORT_SYMBOL_GPL(vhost_dev_flush);
 
-void vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work)
+bool vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work)
 {
-	if (!dev->worker.vtsk)
-		return;
-
+	if (!dev->worker)
+		return false;
+	/*
+	 * vsock can queue while we do a VHOST_SET_OWNER, so we have a smp_wmb
+	 * when setting up the worker. We don't have a smp_rmb here because
+	 * test_and_set_bit gives us a mb already.
+	 */
 	if (!test_and_set_bit(VHOST_WORK_QUEUED, &work->flags)) {
 		/* We can only add the work to the list after we're
 		 * sure it was not in the list.
 		 * test_and_set_bit() implies a memory barrier.
 		 */
-		llist_add(&work->node, &dev->worker.work_list);
-		vhost_task_wake(dev->worker.vtsk);
+		llist_add(&work->node, &dev->worker->work_list);
+		vhost_task_wake(dev->worker->vtsk);
 	}
+
+	return true;
 }
 EXPORT_SYMBOL_GPL(vhost_work_queue);
 
 /* A lockless hint for busy polling code to exit the loop */
 bool vhost_has_work(struct vhost_dev *dev)
 {
-	return !llist_empty(&dev->worker.work_list);
+	return !llist_empty(&dev->worker->work_list);
 }
 EXPORT_SYMBOL_GPL(vhost_has_work);
 
@@ -458,8 +462,7 @@ void vhost_dev_init(struct vhost_dev *dev,
 	dev->umem = NULL;
 	dev->iotlb = NULL;
 	dev->mm = NULL;
-	memset(&dev->worker, 0, sizeof(dev->worker));
-	init_llist_head(&dev->worker.work_list);
+	dev->worker = NULL;
 	dev->iov_limit = iov_limit;
 	dev->weight = weight;
 	dev->byte_weight = byte_weight;
@@ -533,30 +536,47 @@ static void vhost_detach_mm(struct vhost_dev *dev)
 
 static void vhost_worker_free(struct vhost_dev *dev)
 {
-	if (!dev->worker.vtsk)
+	if (!dev->worker)
 		return;
 
-	WARN_ON(!llist_empty(&dev->worker.work_list));
-	vhost_task_stop(dev->worker.vtsk);
-	dev->worker.kcov_handle = 0;
-	dev->worker.vtsk = NULL;
+	WARN_ON(!llist_empty(&dev->worker->work_list));
+	vhost_task_stop(dev->worker->vtsk);
+	kfree(dev->worker);
+	dev->worker = NULL;
 }
 
 static int vhost_worker_create(struct vhost_dev *dev)
 {
+	struct vhost_worker *worker;
 	struct vhost_task *vtsk;
 	char name[TASK_COMM_LEN];
 
+	worker = kzalloc(sizeof(*worker), GFP_KERNEL_ACCOUNT);
+	if (!worker)
+		return -ENOMEM;
+
 	snprintf(name, sizeof(name), "vhost-%d", current->pid);
 
-	vtsk = vhost_task_create(vhost_worker, &dev->worker, name);
+	vtsk = vhost_task_create(vhost_worker, worker, name);
 	if (!vtsk)
-		return -ENOMEM;
+		goto free_worker;
+
+	init_llist_head(&worker->work_list);
+	worker->kcov_handle = kcov_common_handle();
+	worker->vtsk = vtsk;
+	/*
+	 * vsock can already try to queue so make sure llist and vtsk are both
+	 * set before vhost_work_queue sees dev->worker is set.
+	 */
+	smp_wmb();
+	dev->worker = worker;
 
-	dev->worker.kcov_handle = kcov_common_handle();
-	dev->worker.vtsk = vtsk;
 	vhost_task_start(vtsk);
 	return 0;
+
+free_worker:
+	kfree(worker);
+	return -ENOMEM;
 }
 
 /* Caller should have device mutex */
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 37ce869f8a5c..6cd72d0b5245 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -44,7 +44,7 @@ struct vhost_poll {
 };
 
 void vhost_work_init(struct vhost_work *work, vhost_work_fn_t fn);
-void vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work);
+bool vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work);
 bool vhost_has_work(struct vhost_dev *dev);
 
 void vhost_poll_init(struct vhost_poll *poll, vhost_work_fn_t fn,
@@ -158,7 +158,7 @@ struct vhost_dev {
 	struct vhost_virtqueue **vqs;
 	int nvqs;
 	struct eventfd_ctx *log_ctx;
-	struct vhost_worker worker;
+	struct vhost_worker *worker;
 	struct vhost_iotlb *umem;
 	struct vhost_iotlb *iotlb;
 	spinlock_t iotlb_lock;
-- 
2.25.1

Mike Christie

2023-Jun-26 23:22 UTC

head link

[PATCH v9 03/17] vhost: add vhost_worker pointer to vhost_virtqueue

This patchset allows userspace to map vqs to different workers. This
patch adds a worker pointer to the vq so in later patches in this set
we can queue/flush specific vqs and their workers.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/vhost.c | 21 ++++++++++++++-------
 drivers/vhost/vhost.h |  1 +
 2 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index dfd96cf6a152..db88464c1691 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -333,6 +333,7 @@ static void vhost_vq_reset(struct vhost_dev *dev,
 	vq->busyloop_timeout = 0;
 	vq->umem = NULL;
 	vq->iotlb = NULL;
+	vq->worker = NULL;
 	vhost_vring_call_reset(&vq->call_ctx);
 	__vhost_vq_meta_reset(vq);
 }
@@ -545,7 +546,7 @@ static void vhost_worker_free(struct vhost_dev *dev)
 	dev->worker = NULL;
 }
 
-static int vhost_worker_create(struct vhost_dev *dev)
+static struct vhost_worker *vhost_worker_create(struct vhost_dev *dev)
 {
 	struct vhost_worker *worker;
 	struct vhost_task *vtsk;
@@ -553,7 +554,7 @@ static int vhost_worker_create(struct vhost_dev *dev)
 
 	worker = kzalloc(sizeof(*worker), GFP_KERNEL_ACCOUNT);
 	if (!worker)
-		return -ENOMEM;
+		return NULL;
 
 	snprintf(name, sizeof(name), "vhost-%d", current->pid);
 
@@ -572,17 +573,18 @@ static int vhost_worker_create(struct vhost_dev *dev)
 	dev->worker = worker;
 
 	vhost_task_start(vtsk);
-	return 0;
+	return worker;
 
 free_worker:
 	kfree(worker);
-	return -ENOMEM;
+	return NULL;
 }
 
 /* Caller should have device mutex */
 long vhost_dev_set_owner(struct vhost_dev *dev)
 {
-	int err;
+	struct vhost_worker *worker;
+	int err, i;
 
 	/* Is there an owner already? */
 	if (vhost_dev_has_owner(dev)) {
@@ -603,9 +605,14 @@ long vhost_dev_set_owner(struct vhost_dev *dev)
 		 * below since we don't have to worry about vsock queueing
 		 * while we free the worker.
 		 */
-		err = vhost_worker_create(dev);
-		if (err)
+		worker = vhost_worker_create(dev);
+		if (!worker) {
+			err = -ENOMEM;
 			goto err_worker;
+		}
+
+		for (i = 0; i < dev->nvqs; i++)
+			dev->vqs[i]->worker = worker;
 	}
 
 	return 0;
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 6cd72d0b5245..0baacc245934 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -74,6 +74,7 @@ struct vhost_vring_call {
 /* The virtqueue structure describes a queue attached to a device. */
 struct vhost_virtqueue {
 	struct vhost_dev *dev;
+	struct vhost_worker *worker;
 
 	/* The actual ring of buffers. */
 	struct mutex mutex;
-- 
2.25.1

Mike Christie

2023-Jun-26 23:22 UTC

head link

[PATCH v9 04/17] vhost, vhost_net: add helper to check if vq has work

In the next patches each vq might have different workers so one could
have work but others do not. For net, we only want to check specific vqs,
so this adds a helper to check if a vq has work pending and converts
vhost-net to use it.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
Acked-by: Jason Wang <jasowang at redhat.com>
---
 drivers/vhost/net.c   | 2 +-
 drivers/vhost/vhost.c | 6 +++---
 drivers/vhost/vhost.h | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index ae2273196b0c..98bb957eb3b9 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -546,7 +546,7 @@ static void vhost_net_busy_poll(struct vhost_net *net,
 	endtime = busy_clock() + busyloop_timeout;
 
 	while (vhost_can_busy_poll(endtime)) {
-		if (vhost_has_work(&net->dev)) {
+		if (vhost_vq_has_work(vq)) {
 			*busyloop_intr = true;
 			break;
 		}
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index db88464c1691..aafb23e12477 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -266,11 +266,11 @@ bool vhost_work_queue(struct vhost_dev *dev, struct
vhost_work *work)
 EXPORT_SYMBOL_GPL(vhost_work_queue);
 
 /* A lockless hint for busy polling code to exit the loop */
-bool vhost_has_work(struct vhost_dev *dev)
+bool vhost_vq_has_work(struct vhost_virtqueue *vq)
 {
-	return !llist_empty(&dev->worker->work_list);
+	return !llist_empty(&vq->worker->work_list);
 }
-EXPORT_SYMBOL_GPL(vhost_has_work);
+EXPORT_SYMBOL_GPL(vhost_vq_has_work);
 
 void vhost_poll_queue(struct vhost_poll *poll)
 {
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 0baacc245934..d5728f986744 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -45,7 +45,6 @@ struct vhost_poll {
 
 void vhost_work_init(struct vhost_work *work, vhost_work_fn_t fn);
 bool vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work);
-bool vhost_has_work(struct vhost_dev *dev);
 
 void vhost_poll_init(struct vhost_poll *poll, vhost_work_fn_t fn,
 		     __poll_t mask, struct vhost_dev *dev);
@@ -199,6 +198,7 @@ int vhost_get_vq_desc(struct vhost_virtqueue *,
 		      struct vhost_log *log, unsigned int *log_num);
 void vhost_discard_vq_desc(struct vhost_virtqueue *, int n);
 
+bool vhost_vq_has_work(struct vhost_virtqueue *vq);
 bool vhost_vq_is_setup(struct vhost_virtqueue *vq);
 int vhost_vq_init_access(struct vhost_virtqueue *);
 int vhost_add_used(struct vhost_virtqueue *, unsigned int head, int len);
-- 
2.25.1

Mike Christie

2023-Jun-26 23:22 UTC

head link

[PATCH v9 05/17] vhost: take worker or vq instead of dev for queueing

This patch has the core work queueing function take a worker for when we
support multiple workers. It also adds a helper that takes a vq during
queueing so modules can control which vq/worker to queue work on.

This temp leaves vhost_work_queue. It will be removed when the drivers
are converted in the next patches.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/vhost.c | 44 +++++++++++++++++++++++++++----------------
 drivers/vhost/vhost.h |  1 +
 2 files changed, 29 insertions(+), 16 deletions(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index aafb23e12477..611e495eeb3c 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -231,21 +231,10 @@ void vhost_poll_stop(struct vhost_poll *poll)
 }
 EXPORT_SYMBOL_GPL(vhost_poll_stop);
 
-void vhost_dev_flush(struct vhost_dev *dev)
+static bool vhost_worker_queue(struct vhost_worker *worker,
+			       struct vhost_work *work)
 {
-	struct vhost_flush_struct flush;
-
-	init_completion(&flush.wait_event);
-	vhost_work_init(&flush.work, vhost_flush_work);
-
-	if (vhost_work_queue(dev, &flush.work))
-		wait_for_completion(&flush.wait_event);
-}
-EXPORT_SYMBOL_GPL(vhost_dev_flush);
-
-bool vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work)
-{
-	if (!dev->worker)
+	if (!worker)
 		return false;
 	/*
 	 * vsock can queue while we do a VHOST_SET_OWNER, so we have a smp_wmb
@@ -257,14 +246,37 @@ bool vhost_work_queue(struct vhost_dev *dev, struct
vhost_work *work)
 		 * sure it was not in the list.
 		 * test_and_set_bit() implies a memory barrier.
 		 */
-		llist_add(&work->node, &dev->worker->work_list);
-		vhost_task_wake(dev->worker->vtsk);
+		llist_add(&work->node, &worker->work_list);
+		vhost_task_wake(worker->vtsk);
 	}
 
 	return true;
 }
+
+bool vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work)
+{
+	return vhost_worker_queue(dev->worker, work);
+}
 EXPORT_SYMBOL_GPL(vhost_work_queue);
 
+bool vhost_vq_work_queue(struct vhost_virtqueue *vq, struct vhost_work *work)
+{
+	return vhost_worker_queue(vq->worker, work);
+}
+EXPORT_SYMBOL_GPL(vhost_vq_work_queue);
+
+void vhost_dev_flush(struct vhost_dev *dev)
+{
+	struct vhost_flush_struct flush;
+
+	init_completion(&flush.wait_event);
+	vhost_work_init(&flush.work, vhost_flush_work);
+
+	if (vhost_work_queue(dev, &flush.work))
+		wait_for_completion(&flush.wait_event);
+}
+EXPORT_SYMBOL_GPL(vhost_dev_flush);
+
 /* A lockless hint for busy polling code to exit the loop */
 bool vhost_vq_has_work(struct vhost_virtqueue *vq)
 {
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index d5728f986744..e2dd4558a1f9 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -198,6 +198,7 @@ int vhost_get_vq_desc(struct vhost_virtqueue *,
 		      struct vhost_log *log, unsigned int *log_num);
 void vhost_discard_vq_desc(struct vhost_virtqueue *, int n);
 
+bool vhost_vq_work_queue(struct vhost_virtqueue *vq, struct vhost_work *work);
 bool vhost_vq_has_work(struct vhost_virtqueue *vq);
 bool vhost_vq_is_setup(struct vhost_virtqueue *vq);
 int vhost_vq_init_access(struct vhost_virtqueue *);
-- 
2.25.1

Mike Christie

2023-Jun-26 23:22 UTC

head link

[PATCH v9 06/17] vhost: take worker or vq for flushing

This patch has the core work flush function take a worker. When we
support multiple workers we can then flush each worker during device
removal, stoppage, etc. It also adds a helper to flush specific
virtqueues, so vhost-scsi can flush IO vqs from it's ctl vq.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/vhost.c | 15 +++++++++++++--
 drivers/vhost/vhost.h |  1 +
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 611e495eeb3c..2ea107e867a1 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -265,16 +265,27 @@ bool vhost_vq_work_queue(struct vhost_virtqueue *vq,
struct vhost_work *work)
 }
 EXPORT_SYMBOL_GPL(vhost_vq_work_queue);
 
-void vhost_dev_flush(struct vhost_dev *dev)
+static void vhost_worker_flush(struct vhost_worker *worker)
 {
 	struct vhost_flush_struct flush;
 
 	init_completion(&flush.wait_event);
 	vhost_work_init(&flush.work, vhost_flush_work);
 
-	if (vhost_work_queue(dev, &flush.work))
+	if (vhost_worker_queue(worker, &flush.work))
 		wait_for_completion(&flush.wait_event);
 }
+
+void vhost_vq_flush(struct vhost_virtqueue *vq)
+{
+	vhost_worker_flush(vq->worker);
+}
+EXPORT_SYMBOL_GPL(vhost_vq_flush);
+
+void vhost_dev_flush(struct vhost_dev *dev)
+{
+	vhost_worker_flush(dev->worker);
+}
 EXPORT_SYMBOL_GPL(vhost_dev_flush);
 
 /* A lockless hint for busy polling code to exit the loop */
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index e2dd4558a1f9..f208f9923c88 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -198,6 +198,7 @@ int vhost_get_vq_desc(struct vhost_virtqueue *,
 		      struct vhost_log *log, unsigned int *log_num);
 void vhost_discard_vq_desc(struct vhost_virtqueue *, int n);
 
+void vhost_vq_flush(struct vhost_virtqueue *vq);
 bool vhost_vq_work_queue(struct vhost_virtqueue *vq, struct vhost_work *work);
 bool vhost_vq_has_work(struct vhost_virtqueue *vq);
 bool vhost_vq_is_setup(struct vhost_virtqueue *vq);
-- 
2.25.1

Mike Christie

2023-Jun-26 23:22 UTC

head link

[PATCH v9 07/17] vhost: convert poll work to be vq based

This has the drivers pass in their poll to vq mapping and then converts
the core poll code to use the vq based helpers. In the next patches we
will allow vqs to be handled by different workers, so to allow drivers
to execute operations like queue, stop, flush, etc on specific polls/vqs
we need to know the mappings.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/net.c   | 6 ++++--
 drivers/vhost/vhost.c | 8 +++++---
 drivers/vhost/vhost.h | 4 +++-
 3 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 98bb957eb3b9..f2ed7167c848 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -1347,8 +1347,10 @@ static int vhost_net_open(struct inode *inode, struct
file *f)
 		       VHOST_NET_PKT_WEIGHT, VHOST_NET_WEIGHT, true,
 		       NULL);
 
-	vhost_poll_init(n->poll + VHOST_NET_VQ_TX, handle_tx_net, EPOLLOUT, dev);
-	vhost_poll_init(n->poll + VHOST_NET_VQ_RX, handle_rx_net, EPOLLIN, dev);
+	vhost_poll_init(n->poll + VHOST_NET_VQ_TX, handle_tx_net, EPOLLOUT, dev,
+			vqs[VHOST_NET_VQ_TX]);
+	vhost_poll_init(n->poll + VHOST_NET_VQ_RX, handle_rx_net, EPOLLIN, dev,
+			vqs[VHOST_NET_VQ_RX]);
 
 	f->private_data = n;
 	n->page_frag.page = NULL;
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 2ea107e867a1..b6149ed8acb4 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -187,13 +187,15 @@ EXPORT_SYMBOL_GPL(vhost_work_init);
 
 /* Init poll structure */
 void vhost_poll_init(struct vhost_poll *poll, vhost_work_fn_t fn,
-		     __poll_t mask, struct vhost_dev *dev)
+		     __poll_t mask, struct vhost_dev *dev,
+		     struct vhost_virtqueue *vq)
 {
 	init_waitqueue_func_entry(&poll->wait, vhost_poll_wakeup);
 	init_poll_funcptr(&poll->table, vhost_poll_func);
 	poll->mask = mask;
 	poll->dev = dev;
 	poll->wqh = NULL;
+	poll->vq = vq;
 
 	vhost_work_init(&poll->work, fn);
 }
@@ -297,7 +299,7 @@ EXPORT_SYMBOL_GPL(vhost_vq_has_work);
 
 void vhost_poll_queue(struct vhost_poll *poll)
 {
-	vhost_work_queue(poll->dev, &poll->work);
+	vhost_vq_work_queue(poll->vq, &poll->work);
 }
 EXPORT_SYMBOL_GPL(vhost_poll_queue);
 
@@ -508,7 +510,7 @@ void vhost_dev_init(struct vhost_dev *dev,
 		vhost_vq_reset(dev, vq);
 		if (vq->handle_kick)
 			vhost_poll_init(&vq->poll, vq->handle_kick,
-					EPOLLIN, dev);
+					EPOLLIN, dev, vq);
 	}
 }
 EXPORT_SYMBOL_GPL(vhost_dev_init);
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index f208f9923c88..3882266fbbf3 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -41,13 +41,15 @@ struct vhost_poll {
 	struct vhost_work	work;
 	__poll_t		mask;
 	struct vhost_dev	*dev;
+	struct vhost_virtqueue	*vq;
 };
 
 void vhost_work_init(struct vhost_work *work, vhost_work_fn_t fn);
 bool vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work);
 
 void vhost_poll_init(struct vhost_poll *poll, vhost_work_fn_t fn,
-		     __poll_t mask, struct vhost_dev *dev);
+		     __poll_t mask, struct vhost_dev *dev,
+		     struct vhost_virtqueue *vq);
 int vhost_poll_start(struct vhost_poll *poll, struct file *file);
 void vhost_poll_stop(struct vhost_poll *poll);
 void vhost_poll_queue(struct vhost_poll *poll);
-- 
2.25.1

Mike Christie

2023-Jun-26 23:22 UTC

head link

[PATCH v9 08/17] vhost_sock: convert to vhost_vq_work_queue

Convert from vhost_work_queue to vhost_vq_work_queue, so we can drop
vhost_work_queue.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/vsock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
index 6578db78f0ae..817d377a3f36 100644
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -285,7 +285,7 @@ vhost_transport_send_pkt(struct sk_buff *skb)
 		atomic_inc(&vsock->queued_replies);
 
 	virtio_vsock_skb_queue_tail(&vsock->send_pkt_queue, skb);
-	vhost_work_queue(&vsock->dev, &vsock->send_pkt_work);
+	vhost_vq_work_queue(&vsock->vqs[VSOCK_VQ_RX],
&vsock->send_pkt_work);
 
 	rcu_read_unlock();
 	return len;
@@ -583,7 +583,7 @@ static int vhost_vsock_start(struct vhost_vsock *vsock)
 	/* Some packets may have been queued before the device was started,
 	 * let's kick the send worker to send them.
 	 */
-	vhost_work_queue(&vsock->dev, &vsock->send_pkt_work);
+	vhost_vq_work_queue(&vsock->vqs[VSOCK_VQ_RX],
&vsock->send_pkt_work);
 
 	mutex_unlock(&vsock->dev.mutex);
 	return 0;
-- 
2.25.1

Mike Christie

2023-Jun-26 23:22 UTC

head link

[PATCH v9 09/17] vhost_scsi: make SCSI cmd completion per vq

This patch separates the scsi cmd completion code paths so we can complete
cmds based on their vq instead of having all cmds complete on the same
worker/CPU. This will be useful with the next patches that allow us to
create mulitple worker threads and bind them to different vqs, and we can
have completions running on different threads/CPUs.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha at redhat.com>
---
 drivers/vhost/scsi.c | 56 ++++++++++++++++++++------------------------
 1 file changed, 26 insertions(+), 30 deletions(-)

diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c
index bb10fa4bb4f6..a77c53bb035a 100644
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -167,6 +167,7 @@ MODULE_PARM_DESC(max_io_vqs, "Set the max number of IO
virtqueues a vhost scsi d
 
 struct vhost_scsi_virtqueue {
 	struct vhost_virtqueue vq;
+	struct vhost_scsi *vs;
 	/*
 	 * Reference counting for inflight reqs, used for flush operation. At
 	 * each time, one reference tracks new commands submitted, while we
@@ -181,6 +182,9 @@ struct vhost_scsi_virtqueue {
 	struct vhost_scsi_cmd *scsi_cmds;
 	struct sbitmap scsi_tags;
 	int max_cmds;
+
+	struct vhost_work completion_work;
+	struct llist_head completion_list;
 };
 
 struct vhost_scsi {
@@ -190,12 +194,8 @@ struct vhost_scsi {
 
 	struct vhost_dev dev;
 	struct vhost_scsi_virtqueue *vqs;
-	unsigned long *compl_bitmap;
 	struct vhost_scsi_inflight **old_inflight;
 
-	struct vhost_work vs_completion_work; /* cmd completion work item */
-	struct llist_head vs_completion_list; /* cmd completion queue */
-
 	struct vhost_work vs_event_work; /* evt injection work item */
 	struct llist_head vs_event_list; /* evt injection queue */
 
@@ -358,10 +358,11 @@ static void vhost_scsi_release_cmd(struct se_cmd *se_cmd)
 	} else {
 		struct vhost_scsi_cmd *cmd = container_of(se_cmd,
 					struct vhost_scsi_cmd, tvc_se_cmd);
-		struct vhost_scsi *vs = cmd->tvc_vhost;
+		struct vhost_scsi_virtqueue *svq =  container_of(cmd->tvc_vq,
+					struct vhost_scsi_virtqueue, vq);
 
-		llist_add(&cmd->tvc_completion_list, &vs->vs_completion_list);
-		vhost_work_queue(&vs->dev, &vs->vs_completion_work);
+		llist_add(&cmd->tvc_completion_list, &svq->completion_list);
+		vhost_vq_work_queue(&svq->vq, &svq->completion_work);
 	}
 }
 
@@ -509,17 +510,17 @@ static void vhost_scsi_evt_work(struct vhost_work *work)
  */
 static void vhost_scsi_complete_cmd_work(struct vhost_work *work)
 {
-	struct vhost_scsi *vs = container_of(work, struct vhost_scsi,
-					vs_completion_work);
+	struct vhost_scsi_virtqueue *svq = container_of(work,
+				struct vhost_scsi_virtqueue, completion_work);
 	struct virtio_scsi_cmd_resp v_rsp;
 	struct vhost_scsi_cmd *cmd, *t;
 	struct llist_node *llnode;
 	struct se_cmd *se_cmd;
 	struct iov_iter iov_iter;
-	int ret, vq;
+	bool signal = false;
+	int ret;
 
-	bitmap_zero(vs->compl_bitmap, vs->dev.nvqs);
-	llnode = llist_del_all(&vs->vs_completion_list);
+	llnode = llist_del_all(&svq->completion_list);
 	llist_for_each_entry_safe(cmd, t, llnode, tvc_completion_list) {
 		se_cmd = &cmd->tvc_se_cmd;
 
@@ -539,21 +540,17 @@ static void vhost_scsi_complete_cmd_work(struct vhost_work
*work)
 			      cmd->tvc_in_iovs, sizeof(v_rsp));
 		ret = copy_to_iter(&v_rsp, sizeof(v_rsp), &iov_iter);
 		if (likely(ret == sizeof(v_rsp))) {
-			struct vhost_scsi_virtqueue *q;
+			signal = true;
+
 			vhost_add_used(cmd->tvc_vq, cmd->tvc_vq_desc, 0);
-			q = container_of(cmd->tvc_vq, struct vhost_scsi_virtqueue, vq);
-			vq = q - vs->vqs;
-			__set_bit(vq, vs->compl_bitmap);
 		} else
 			pr_err("Faulted on virtio_scsi_cmd_resp\n");
 
 		vhost_scsi_release_cmd_res(se_cmd);
 	}
 
-	vq = -1;
-	while ((vq = find_next_bit(vs->compl_bitmap, vs->dev.nvqs, vq + 1))
-		< vs->dev.nvqs)
-		vhost_signal(&vs->dev, &vs->vqs[vq].vq);
+	if (signal)
+		vhost_signal(&svq->vs->dev, &svq->vq);
 }
 
 static struct vhost_scsi_cmd *
@@ -1770,6 +1767,7 @@ static int vhost_scsi_set_features(struct vhost_scsi *vs,
u64 features)
 
 static int vhost_scsi_open(struct inode *inode, struct file *f)
 {
+	struct vhost_scsi_virtqueue *svq;
 	struct vhost_scsi *vs;
 	struct vhost_virtqueue **vqs;
 	int r = -ENOMEM, i, nvqs = vhost_scsi_max_io_vqs;
@@ -1788,10 +1786,6 @@ static int vhost_scsi_open(struct inode *inode, struct
file *f)
 	}
 	nvqs += VHOST_SCSI_VQ_IO;
 
-	vs->compl_bitmap = bitmap_alloc(nvqs, GFP_KERNEL);
-	if (!vs->compl_bitmap)
-		goto err_compl_bitmap;
-
 	vs->old_inflight = kmalloc_array(nvqs, sizeof(*vs->old_inflight),
 					 GFP_KERNEL | __GFP_ZERO);
 	if (!vs->old_inflight)
@@ -1806,7 +1800,6 @@ static int vhost_scsi_open(struct inode *inode, struct
file *f)
 	if (!vqs)
 		goto err_local_vqs;
 
-	vhost_work_init(&vs->vs_completion_work, vhost_scsi_complete_cmd_work);
 	vhost_work_init(&vs->vs_event_work, vhost_scsi_evt_work);
 
 	vs->vs_events_nr = 0;
@@ -1817,8 +1810,14 @@ static int vhost_scsi_open(struct inode *inode, struct
file *f)
 	vs->vqs[VHOST_SCSI_VQ_CTL].vq.handle_kick = vhost_scsi_ctl_handle_kick;
 	vs->vqs[VHOST_SCSI_VQ_EVT].vq.handle_kick = vhost_scsi_evt_handle_kick;
 	for (i = VHOST_SCSI_VQ_IO; i < nvqs; i++) {
-		vqs[i] = &vs->vqs[i].vq;
-		vs->vqs[i].vq.handle_kick = vhost_scsi_handle_kick;
+		svq = &vs->vqs[i];
+
+		vqs[i] = &svq->vq;
+		svq->vs = vs;
+		init_llist_head(&svq->completion_list);
+		vhost_work_init(&svq->completion_work,
+				vhost_scsi_complete_cmd_work);
+		svq->vq.handle_kick = vhost_scsi_handle_kick;
 	}
 	vhost_dev_init(&vs->dev, vqs, nvqs, UIO_MAXIOV,
 		       VHOST_SCSI_WEIGHT, 0, true, NULL);
@@ -1833,8 +1832,6 @@ static int vhost_scsi_open(struct inode *inode, struct
file *f)
 err_vqs:
 	kfree(vs->old_inflight);
 err_inflight:
-	bitmap_free(vs->compl_bitmap);
-err_compl_bitmap:
 	kvfree(vs);
 err_vs:
 	return r;
@@ -1854,7 +1851,6 @@ static int vhost_scsi_release(struct inode *inode, struct
file *f)
 	kfree(vs->dev.vqs);
 	kfree(vs->vqs);
 	kfree(vs->old_inflight);
-	bitmap_free(vs->compl_bitmap);
 	kvfree(vs);
 	return 0;
 }
-- 
2.25.1

Mike Christie

2023-Jun-26 23:23 UTC

head link

[PATCH v9 10/17] vhost_scsi: convert to vhost_vq_work_queue

Convert from vhost_work_queue to vhost_vq_work_queue so we can
remove vhost_work_queue.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/scsi.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c
index a77c53bb035a..1668009bd489 100644
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -353,8 +353,9 @@ static void vhost_scsi_release_cmd(struct se_cmd *se_cmd)
 	if (se_cmd->se_cmd_flags & SCF_SCSI_TMR_CDB) {
 		struct vhost_scsi_tmf *tmf = container_of(se_cmd,
 					struct vhost_scsi_tmf, se_cmd);
+		struct vhost_virtqueue *vq = &tmf->svq->vq;
 
-		vhost_work_queue(&tmf->vhost->dev, &tmf->vwork);
+		vhost_vq_work_queue(vq, &tmf->vwork);
 	} else {
 		struct vhost_scsi_cmd *cmd = container_of(se_cmd,
 					struct vhost_scsi_cmd, tvc_se_cmd);
@@ -1332,11 +1333,9 @@ static void vhost_scsi_ctl_handle_kick(struct vhost_work
*work)
 }
 
 static void
-vhost_scsi_send_evt(struct vhost_scsi *vs,
-		   struct vhost_scsi_tpg *tpg,
-		   struct se_lun *lun,
-		   u32 event,
-		   u32 reason)
+vhost_scsi_send_evt(struct vhost_scsi *vs, struct vhost_virtqueue *vq,
+		    struct vhost_scsi_tpg *tpg, struct se_lun *lun,
+		    u32 event, u32 reason)
 {
 	struct vhost_scsi_evt *evt;
 
@@ -1358,7 +1357,7 @@ vhost_scsi_send_evt(struct vhost_scsi *vs,
 	}
 
 	llist_add(&evt->list, &vs->vs_event_list);
-	vhost_work_queue(&vs->dev, &vs->vs_event_work);
+	vhost_vq_work_queue(vq, &vs->vs_event_work);
 }
 
 static void vhost_scsi_evt_handle_kick(struct vhost_work *work)
@@ -1372,7 +1371,8 @@ static void vhost_scsi_evt_handle_kick(struct vhost_work
*work)
 		goto out;
 
 	if (vs->vs_events_missed)
-		vhost_scsi_send_evt(vs, NULL, NULL, VIRTIO_SCSI_T_NO_EVENT, 0);
+		vhost_scsi_send_evt(vs, vq, NULL, NULL, VIRTIO_SCSI_T_NO_EVENT,
+				    0);
 out:
 	mutex_unlock(&vq->mutex);
 }
@@ -1991,7 +1991,7 @@ vhost_scsi_do_plug(struct vhost_scsi_tpg *tpg,
 		goto unlock;
 
 	if (vhost_has_feature(vq, VIRTIO_SCSI_F_HOTPLUG))
-		vhost_scsi_send_evt(vs, tpg, lun,
+		vhost_scsi_send_evt(vs, vq, tpg, lun,
 				   VIRTIO_SCSI_T_TRANSPORT_RESET, reason);
 unlock:
 	mutex_unlock(&vq->mutex);
-- 
2.25.1

Mike Christie

2023-Jun-26 23:23 UTC

head link

[PATCH v9 11/17] vhost_scsi: flush IO vqs then send TMF rsp

With one worker we will always send the scsi cmd responses then send the
TMF rsp, because LIO will always complete the scsi cmds first then call
into us to send the TMF response.

With multiple workers, the IO vq workers could be running while the
TMF/ctl vq worker is running so this has us do a flush before completing
the TMF to make sure cmds are completed when it's work is later queued
and run.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/scsi.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c
index 1668009bd489..2c3cf487cc71 100644
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -1133,12 +1133,27 @@ static void vhost_scsi_tmf_resp_work(struct vhost_work
*work)
 {
 	struct vhost_scsi_tmf *tmf = container_of(work, struct vhost_scsi_tmf,
 						  vwork);
-	int resp_code;
+	struct vhost_virtqueue *ctl_vq, *vq;
+	int resp_code, i;
+
+	if (tmf->scsi_resp == TMR_FUNCTION_COMPLETE) {
+		/*
+		 * Flush IO vqs that don't share a worker with the ctl to make
+		 * sure they have sent their responses before us.
+		 */
+		ctl_vq = &tmf->vhost->vqs[VHOST_SCSI_VQ_CTL].vq;
+		for (i = VHOST_SCSI_VQ_IO; i < tmf->vhost->dev.nvqs; i++) {
+			vq = &tmf->vhost->vqs[i].vq;
+
+			if (vhost_vq_is_setup(vq) &&
+			    vq->worker != ctl_vq->worker)
+				vhost_vq_flush(vq);
+		}
 
-	if (tmf->scsi_resp == TMR_FUNCTION_COMPLETE)
 		resp_code = VIRTIO_SCSI_S_FUNCTION_SUCCEEDED;
-	else
+	} else {
 		resp_code = VIRTIO_SCSI_S_FUNCTION_REJECTED;
+	}
 
 	vhost_scsi_send_tmf_resp(tmf->vhost, &tmf->svq->vq,
tmf->in_iovs,
 				 tmf->vq_desc, &tmf->resp_iov, resp_code);
-- 
2.25.1

Mike Christie

2023-Jun-26 23:23 UTC

head link

[PATCH v9 12/17] vhost: remove vhost_work_queue

vhost_work_queue is no longer used. Each driver is using the poll or vq
based queueing, so remove vhost_work_queue.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/vhost.c | 6 ------
 drivers/vhost/vhost.h | 5 ++---
 2 files changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index b6149ed8acb4..6cadbc6e6d11 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -255,12 +255,6 @@ static bool vhost_worker_queue(struct vhost_worker *worker,
 	return true;
 }
 
-bool vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work)
-{
-	return vhost_worker_queue(dev->worker, work);
-}
-EXPORT_SYMBOL_GPL(vhost_work_queue);
-
 bool vhost_vq_work_queue(struct vhost_virtqueue *vq, struct vhost_work *work)
 {
 	return vhost_worker_queue(vq->worker, work);
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 3882266fbbf3..83f78b6f563b 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -44,15 +44,14 @@ struct vhost_poll {
 	struct vhost_virtqueue	*vq;
 };
 
-void vhost_work_init(struct vhost_work *work, vhost_work_fn_t fn);
-bool vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work);
-
 void vhost_poll_init(struct vhost_poll *poll, vhost_work_fn_t fn,
 		     __poll_t mask, struct vhost_dev *dev,
 		     struct vhost_virtqueue *vq);
 int vhost_poll_start(struct vhost_poll *poll, struct file *file);
 void vhost_poll_stop(struct vhost_poll *poll);
 void vhost_poll_queue(struct vhost_poll *poll);
+
+void vhost_work_init(struct vhost_work *work, vhost_work_fn_t fn);
 void vhost_dev_flush(struct vhost_dev *dev);
 
 struct vhost_log {
-- 
2.25.1

Mike Christie

2023-Jun-26 23:23 UTC

head link

[PATCH v9 13/17] vhost: add helper to parse userspace vring state/file

The next patches add new vhost worker ioctls which will need to get a
vhost_virtqueue from a userspace struct which specifies the vq's index.
This moves the vhost_vring_ioctl code to do this to a helper so it can
be shared.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/vhost.c | 29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 6cadbc6e6d11..12203d3893c5 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -599,6 +599,27 @@ static struct vhost_worker *vhost_worker_create(struct
vhost_dev *dev)
 	return NULL;
 }
 
+static int vhost_get_vq_from_user(struct vhost_dev *dev, void __user *argp,
+				  struct vhost_virtqueue **vq, u32 *id)
+{
+	u32 __user *idxp = argp;
+	u32 idx;
+	long r;
+
+	r = get_user(idx, idxp);
+	if (r < 0)
+		return r;
+
+	if (idx >= dev->nvqs)
+		return -ENOBUFS;
+
+	idx = array_index_nospec(idx, dev->nvqs);
+
+	*vq = dev->vqs[idx];
+	*id = idx;
+	return 0;
+}
+
 /* Caller should have device mutex */
 long vhost_dev_set_owner(struct vhost_dev *dev)
 {
@@ -1618,21 +1639,15 @@ long vhost_vring_ioctl(struct vhost_dev *d, unsigned int
ioctl, void __user *arg
 	struct file *eventfp, *filep = NULL;
 	bool pollstart = false, pollstop = false;
 	struct eventfd_ctx *ctx = NULL;
-	u32 __user *idxp = argp;
 	struct vhost_virtqueue *vq;
 	struct vhost_vring_state s;
 	struct vhost_vring_file f;
 	u32 idx;
 	long r;
 
-	r = get_user(idx, idxp);
+	r = vhost_get_vq_from_user(d, argp, &vq, &idx);
 	if (r < 0)
 		return r;
-	if (idx >= d->nvqs)
-		return -ENOBUFS;
-
-	idx = array_index_nospec(idx, d->nvqs);
-	vq = d->vqs[idx];
 
 	if (ioctl == VHOST_SET_VRING_NUM ||
 	    ioctl == VHOST_SET_VRING_ADDR) {
-- 
2.25.1

Mike Christie

2023-Jun-26 23:23 UTC

head link

[PATCH v9 14/17] vhost: replace single worker pointer with xarray

The next patch allows userspace to create multiple workers per device,
so this patch replaces the vhost_worker pointer with an xarray so we
can store mupltiple workers and look them up.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/vhost.c | 64 ++++++++++++++++++++++++++++++++-----------
 drivers/vhost/vhost.h |  3 +-
 2 files changed, 50 insertions(+), 17 deletions(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 12203d3893c5..ffbaf7d32e2c 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -280,7 +280,11 @@ EXPORT_SYMBOL_GPL(vhost_vq_flush);
 
 void vhost_dev_flush(struct vhost_dev *dev)
 {
-	vhost_worker_flush(dev->worker);
+	struct vhost_worker *worker;
+	unsigned long i;
+
+	xa_for_each(&dev->worker_xa, i, worker)
+		vhost_worker_flush(worker);
 }
 EXPORT_SYMBOL_GPL(vhost_dev_flush);
 
@@ -482,7 +486,6 @@ void vhost_dev_init(struct vhost_dev *dev,
 	dev->umem = NULL;
 	dev->iotlb = NULL;
 	dev->mm = NULL;
-	dev->worker = NULL;
 	dev->iov_limit = iov_limit;
 	dev->weight = weight;
 	dev->byte_weight = byte_weight;
@@ -492,7 +495,7 @@ void vhost_dev_init(struct vhost_dev *dev,
 	INIT_LIST_HEAD(&dev->read_list);
 	INIT_LIST_HEAD(&dev->pending_list);
 	spin_lock_init(&dev->iotlb_lock);
-
+	xa_init_flags(&dev->worker_xa, XA_FLAGS_ALLOC);
 
 	for (i = 0; i < dev->nvqs; ++i) {
 		vq = dev->vqs[i];
@@ -554,15 +557,35 @@ static void vhost_detach_mm(struct vhost_dev *dev)
 	dev->mm = NULL;
 }
 
-static void vhost_worker_free(struct vhost_dev *dev)
+static void vhost_worker_destroy(struct vhost_dev *dev,
+				 struct vhost_worker *worker)
+{
+	if (!worker)
+		return;
+
+	WARN_ON(!llist_empty(&worker->work_list));
+	xa_erase(&dev->worker_xa, worker->id);
+	vhost_task_stop(worker->vtsk);
+	kfree(worker);
+}
+
+static void vhost_workers_free(struct vhost_dev *dev)
 {
-	if (!dev->worker)
+	struct vhost_worker *worker;
+	unsigned long i;
+
+	if (!dev->use_worker)
 		return;
 
-	WARN_ON(!llist_empty(&dev->worker->work_list));
-	vhost_task_stop(dev->worker->vtsk);
-	kfree(dev->worker);
-	dev->worker = NULL;
+	for (i = 0; i < dev->nvqs; i++)
+		dev->vqs[i]->worker = NULL;
+	/*
+	 * Free the default worker we created and cleanup workers userspace
+	 * created but couldn't clean up (it forgot or crashed).
+	 */
+	xa_for_each(&dev->worker_xa, i, worker)
+		vhost_worker_destroy(dev, worker);
+	xa_destroy(&dev->worker_xa);
 }
 
 static struct vhost_worker *vhost_worker_create(struct vhost_dev *dev)
@@ -570,6 +593,8 @@ static struct vhost_worker *vhost_worker_create(struct
vhost_dev *dev)
 	struct vhost_worker *worker;
 	struct vhost_task *vtsk;
 	char name[TASK_COMM_LEN];
+	int ret;
+	u32 id;
 
 	worker = kzalloc(sizeof(*worker), GFP_KERNEL_ACCOUNT);
 	if (!worker)
@@ -584,16 +609,18 @@ static struct vhost_worker *vhost_worker_create(struct
vhost_dev *dev)
 	init_llist_head(&worker->work_list);
 	worker->kcov_handle = kcov_common_handle();
 	worker->vtsk = vtsk;
-	/*
-	 * vsock can already try to queue so make sure llist and vtsk are both
-	 * set before vhost_work_queue sees dev->worker is set.
-	 */
-	smp_wmb();
-	dev->worker = worker;
 
 	vhost_task_start(vtsk);
+
+	ret = xa_alloc(&dev->worker_xa, &id, worker, xa_limit_32b,
GFP_KERNEL);
+	if (ret < 0)
+		goto stop_worker;
+	worker->id = id;
+
 	return worker;
 
+stop_worker:
+	vhost_task_stop(vtsk);
 free_worker:
 	kfree(worker);
 	return NULL;
@@ -650,6 +677,11 @@ long vhost_dev_set_owner(struct vhost_dev *dev)
 			err = -ENOMEM;
 			goto err_worker;
 		}
+		/*
+		 * vsock can already try to queue so make sure the worker
+		 * is setup before vhost_vq_work_queue sees vq->worker is set.
+		 */
+		smp_wmb();
 
 		for (i = 0; i < dev->nvqs; i++)
 			dev->vqs[i]->worker = worker;
@@ -751,7 +783,7 @@ void vhost_dev_cleanup(struct vhost_dev *dev)
 	dev->iotlb = NULL;
 	vhost_clear_msg(dev);
 	wake_up_interruptible_poll(&dev->wait, EPOLLIN | EPOLLRDNORM);
-	vhost_worker_free(dev);
+	vhost_workers_free(dev);
 	vhost_detach_mm(dev);
 }
 EXPORT_SYMBOL_GPL(vhost_dev_cleanup);
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 83f78b6f563b..44c3017766b2 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -30,6 +30,7 @@ struct vhost_worker {
 	struct vhost_task	*vtsk;
 	struct llist_head	work_list;
 	u64			kcov_handle;
+	u32			id;
 };
 
 /* Poll a file (eventfd or socket) */
@@ -159,7 +160,6 @@ struct vhost_dev {
 	struct vhost_virtqueue **vqs;
 	int nvqs;
 	struct eventfd_ctx *log_ctx;
-	struct vhost_worker *worker;
 	struct vhost_iotlb *umem;
 	struct vhost_iotlb *iotlb;
 	spinlock_t iotlb_lock;
@@ -169,6 +169,7 @@ struct vhost_dev {
 	int iov_limit;
 	int weight;
 	int byte_weight;
+	struct xarray worker_xa;
 	bool use_worker;
 	int (*msg_handler)(struct vhost_dev *dev, u32 asid,
 			   struct vhost_iotlb_msg *msg);
-- 
2.25.1

Mike Christie

2023-Jun-26 23:23 UTC

head link

[PATCH v9 15/17] vhost: allow userspace to create workers

For vhost-scsi with 3 vqs or more and a workload that tries to use
them in parallel like:

fio --filename=/dev/sdb  --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128  --numjobs=3

the single vhost worker thread will become a bottlneck and we are stuck
at around 500K IOPs no matter how many jobs, virtqueues, and CPUs are
used.

To better utilize virtqueues and available CPUs, this patch allows
userspace to create workers and bind them to vqs. You can have N workers
per dev and also share N workers with M vqs on that dev.

This patch adds the interface related code and the next patch will hook
vhost-scsi into it. The patches do not try to hook net and vsock into
the interface because:

1. multiple workers don't seem to help vsock. The problem is that with
only 2 virtqueues we never fully use the existing worker when doing
bidirectional tests. This seems to match vhost-scsi where we don't see
the worker as a bottleneck until 3 virtqueues are used.

2. net already has a way to use multiple workers.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/vhost.c            | 142 ++++++++++++++++++++++++++++++-
 drivers/vhost/vhost.h            |   3 +
 include/uapi/linux/vhost.h       |  33 +++++++
 include/uapi/linux/vhost_types.h |  16 ++++
 4 files changed, 193 insertions(+), 1 deletion(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index ffbaf7d32e2c..bfba91ecbd0a 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -626,6 +626,76 @@ static struct vhost_worker *vhost_worker_create(struct
vhost_dev *dev)
 	return NULL;
 }
 
+/* Caller must have device mutex */
+static void __vhost_vq_attach_worker(struct vhost_virtqueue *vq,
+				     struct vhost_worker *worker)
+{
+	if (vq->worker)
+		vq->worker->attachment_cnt--;
+	worker->attachment_cnt++;
+	vq->worker = worker;
+}
+
+ /* Caller must have device and virtqueue mutex */
+static int vhost_vq_attach_worker(struct vhost_virtqueue *vq,
+				  struct vhost_vring_worker *info)
+{
+	unsigned long index = info->worker_id;
+	struct vhost_dev *dev = vq->dev;
+	struct vhost_worker *worker;
+
+	if (!dev->use_worker)
+		return -EINVAL;
+
+	/*
+	 * We only allow userspace to set a virtqueue's worker if it's not
+	 * active and polling is not enabled. We also assume drivers
+	 * supporting this will not be internally queueing works directly or
+	 * via calls like vhost_dev_flush at this time.
+	 */
+	if (vhost_vq_get_backend(vq) || vq->kick)
+		return -EBUSY;
+
+	worker = xa_find(&dev->worker_xa, &index, UINT_MAX, XA_PRESENT);
+	if (!worker || worker->id != info->worker_id)
+		return -ENODEV;
+
+	__vhost_vq_attach_worker(vq, worker);
+	return 0;
+}
+
+/* Caller must have device mutex */
+static int vhost_new_worker(struct vhost_dev *dev,
+			    struct vhost_worker_state *info)
+{
+	struct vhost_worker *worker;
+
+	worker = vhost_worker_create(dev);
+	if (!worker)
+		return -ENOMEM;
+
+	info->worker_id = worker->id;
+	return 0;
+}
+
+/* Caller must have device mutex */
+static int vhost_free_worker(struct vhost_dev *dev,
+			     struct vhost_worker_state *info)
+{
+	unsigned long index = info->worker_id;
+	struct vhost_worker *worker;
+
+	worker = xa_find(&dev->worker_xa, &index, UINT_MAX, XA_PRESENT);
+	if (!worker || worker->id != info->worker_id)
+		return -ENODEV;
+
+	if (worker->attachment_cnt)
+		return -EBUSY;
+
+	vhost_worker_destroy(dev, worker);
+	return 0;
+}
+
 static int vhost_get_vq_from_user(struct vhost_dev *dev, void __user *argp,
 				  struct vhost_virtqueue **vq, u32 *id)
 {
@@ -647,6 +717,76 @@ static int vhost_get_vq_from_user(struct vhost_dev *dev,
void __user *argp,
 	return 0;
 }
 
+/* Caller must have device mutex */
+long vhost_worker_ioctl(struct vhost_dev *dev, unsigned int ioctl,
+			void __user *argp)
+{
+	struct vhost_vring_worker ring_worker;
+	struct vhost_worker_state state;
+	struct vhost_virtqueue *vq;
+	long ret;
+	u32 idx;
+
+	if (!dev->use_worker)
+		return -EINVAL;
+
+	if (!vhost_dev_has_owner(dev))
+		return -EINVAL;
+
+	ret = vhost_dev_check_owner(dev);
+	if (ret)
+		return ret;
+
+	switch (ioctl) {
+	/* dev worker ioctls */
+	case VHOST_NEW_WORKER:
+		ret = vhost_new_worker(dev, &state);
+		if (!ret && copy_to_user(argp, &state, sizeof(state)))
+			ret = -EFAULT;
+		return ret;
+	case VHOST_FREE_WORKER:
+		if (copy_from_user(&state, argp, sizeof(state)))
+			return -EFAULT;
+		return vhost_free_worker(dev, &state);
+	/* vring worker ioctls */
+	case VHOST_ATTACH_VRING_WORKER:
+	case VHOST_GET_VRING_WORKER:
+		break;
+	default:
+		return -ENOIOCTLCMD;
+	}
+
+	ret = vhost_get_vq_from_user(dev, argp, &vq, &idx);
+	if (ret)
+		return ret;
+
+	mutex_lock(&vq->mutex);
+	switch (ioctl) {
+	case VHOST_ATTACH_VRING_WORKER:
+		if (copy_from_user(&ring_worker, argp, sizeof(ring_worker))) {
+			ret = -EFAULT;
+			break;
+		}
+
+		ret = vhost_vq_attach_worker(vq, &ring_worker);
+		break;
+	case VHOST_GET_VRING_WORKER:
+		ring_worker.index = idx;
+		ring_worker.worker_id = vq->worker->id;
+
+		if (copy_to_user(argp, &ring_worker, sizeof(ring_worker)))
+			ret = -EFAULT;
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+
+	mutex_unlock(&vq->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(vhost_worker_ioctl);
+
 /* Caller should have device mutex */
 long vhost_dev_set_owner(struct vhost_dev *dev)
 {
@@ -684,7 +824,7 @@ long vhost_dev_set_owner(struct vhost_dev *dev)
 		smp_wmb();
 
 		for (i = 0; i < dev->nvqs; i++)
-			dev->vqs[i]->worker = worker;
+			__vhost_vq_attach_worker(dev->vqs[i], worker);
 	}
 
 	return 0;
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 44c3017766b2..039be5d56867 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -31,6 +31,7 @@ struct vhost_worker {
 	struct llist_head	work_list;
 	u64			kcov_handle;
 	u32			id;
+	int			attachment_cnt;
 };
 
 /* Poll a file (eventfd or socket) */
@@ -190,6 +191,8 @@ void vhost_dev_cleanup(struct vhost_dev *);
 void vhost_dev_stop(struct vhost_dev *);
 long vhost_dev_ioctl(struct vhost_dev *, unsigned int ioctl, void __user
*argp);
 long vhost_vring_ioctl(struct vhost_dev *d, unsigned int ioctl, void __user
*argp);
+long vhost_worker_ioctl(struct vhost_dev *dev, unsigned int ioctl,
+			void __user *argp);
 bool vhost_vq_access_ok(struct vhost_virtqueue *vq);
 bool vhost_log_access_ok(struct vhost_dev *);
 void vhost_clear_msg(struct vhost_dev *dev);
diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
index 92e1b700b51c..96dc146c2d15 100644
--- a/include/uapi/linux/vhost.h
+++ b/include/uapi/linux/vhost.h
@@ -45,6 +45,25 @@
 #define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
 /* Specify an eventfd file descriptor to signal on log write. */
 #define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
+/* By default, a device gets one vhost_worker that its virtqueues share. This
+ * command allows the owner of the device to create an additional vhost_worker
+ * for the device. It can later be bound to 1 or more of its virtqueues using
+ * the VHOST_ATTACH_VRING_WORKER command.
+ *
+ * This must be called after VHOST_SET_OWNER and the caller must be the owner
+ * of the device. The new thread will inherit caller's cgroups and
namespaces,
+ * and will share the caller's memory space. The new thread will also be
+ * counted against the caller's RLIMIT_NPROC value.
+ *
+ * The worker's ID used in other commands will be returned in
+ * vhost_worker_state.
+ */
+#define VHOST_NEW_WORKER _IOR(VHOST_VIRTIO, 0x8, struct vhost_worker_state)
+/* Free a worker created with VHOST_NEW_WORKER if it's not attached to any
+ * virtqueue. If userspace is not able to call this for workers its created,
+ * the kernel will free all the device's workers when the device is closed.
+ */
+#define VHOST_FREE_WORKER _IOW(VHOST_VIRTIO, 0x9, struct vhost_worker_state)
 
 /* Ring setup. */
 /* Set number of descriptors in ring. This parameter can not
@@ -70,6 +89,20 @@
 #define VHOST_VRING_BIG_ENDIAN 1
 #define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct
vhost_vring_state)
 #define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct
vhost_vring_state)
+/* Attach a vhost_worker created with VHOST_NEW_WORKER to one of the
device's
+ * virtqueues. This must be done before VHOST_SET_VRING_KICK and the driver
+ * specific ioctl to activate the virtqueue (VHOST_SCSI_SET_ENDPOINT,
+ * VHOST_NET_SET_BACKEND, VHOST_VSOCK_SET_RUNNING) has been run.
+ *
+ * This will replace the virtqueue's existing worker. If the replaced
worker
+ * is no longer attached to any virtqueues, it can be freed with
+ * VHOST_FREE_WORKER.
+ */
+#define VHOST_ATTACH_VRING_WORKER _IOW(VHOST_VIRTIO, 0x15,		\
+				       struct vhost_vring_worker)
+/* Return the vring worker's ID */
+#define VHOST_GET_VRING_WORKER _IOWR(VHOST_VIRTIO, 0x16,		\
+				     struct vhost_vring_worker)
 
 /* The following ioctls use eventfd file descriptors to signal and poll
  * for events. */
diff --git a/include/uapi/linux/vhost_types.h b/include/uapi/linux/vhost_types.h
index 4889e6d70b15..2d827d22cd99 100644
--- a/include/uapi/linux/vhost_types.h
+++ b/include/uapi/linux/vhost_types.h
@@ -47,6 +47,22 @@ struct vhost_vring_addr {
 	__u64 log_guest_addr;
 };
 
+struct vhost_worker_state {
+	/*
+	 * For VHOST_NEW_WORKER the kernel will return the new vhost_worker id.
+	 * For VHOST_FREE_WORKER this must be set to the id of the vhost_worker
+	 * to free.
+	 */
+	unsigned int worker_id;
+};
+
+struct vhost_vring_worker {
+	/* vring index */
+	unsigned int index;
+	/* The id of the vhost_worker returned from VHOST_NEW_WORKER */
+	unsigned int worker_id;
+};
+
 /* no alignment requirement */
 struct vhost_iotlb_msg {
 	__u64 iova;
-- 
2.25.1

Mike Christie

2023-Jun-26 23:23 UTC

head link

[PATCH v9 16/17] vhost_scsi: add support for worker ioctls

This has vhost-scsi support the worker ioctls by calling the
vhost_worker_ioctl helper.

With a single worker, the single thread becomes a bottlneck when trying
to use 3 or more virtqueues like:

fio --filename=/dev/sdb  --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128  --numjobs=3

With the patches and doing a worker per vq, we can scale to at least
16 vCPUs/vqs (that's my system limit) with the same command fio command
above with numjobs=16:

fio --filename=/dev/sdb  --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=64  --numjobs=16

which gives around 2002K IOPs.

Note that for testing I dropped depth to 64 above because the vhost/virt
layer supports only 1024 total commands per device. And the only tuning I
did was set LIO's emulate_pr to 0 to avoid LIO's PR lock in the main IO
path which becomes an issue at around 12 jobs/virtqueues.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/scsi.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c
index 2c3cf487cc71..c83f7f043470 100644
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -1927,6 +1927,14 @@ vhost_scsi_ioctl(struct file *f,
 		if (copy_from_user(&features, featurep, sizeof features))
 			return -EFAULT;
 		return vhost_scsi_set_features(vs, features);
+	case VHOST_NEW_WORKER:
+	case VHOST_FREE_WORKER:
+	case VHOST_ATTACH_VRING_WORKER:
+	case VHOST_GET_VRING_WORKER:
+		mutex_lock(&vs->dev.mutex);
+		r = vhost_worker_ioctl(&vs->dev, ioctl, argp);
+		mutex_unlock(&vs->dev.mutex);
+		return r;
 	default:
 		mutex_lock(&vs->dev.mutex);
 		r = vhost_dev_ioctl(&vs->dev, ioctl, argp);
-- 
2.25.1

Mike Christie

2023-Jun-26 23:23 UTC

head link

[PATCH v9 17/17] vhost: Allow worker switching while work is queueing

This patch drops the requirement that we can only switch workers if work
has not been queued by using RCU for the vq based queueing paths and a
mutex for the device wide flush.

We can also use this to support SIGKILL properly in the future where we
should exit almost immediately after getting that signal. With this
patch, when get_signal returns true, we can set the vq->worker to NULL
and do a synchronize_rcu to prevent new work from being queued to the
vhost_task that has been killed.

Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
 drivers/vhost/vhost.c      | 153 +++++++++++++++++++++++++++----------
 drivers/vhost/vhost.h      |   4 +-
 include/uapi/linux/vhost.h |   4 +-
 3 files changed, 115 insertions(+), 46 deletions(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index bfba91ecbd0a..c71d573f1c94 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -233,16 +233,9 @@ void vhost_poll_stop(struct vhost_poll *poll)
 }
 EXPORT_SYMBOL_GPL(vhost_poll_stop);
 
-static bool vhost_worker_queue(struct vhost_worker *worker,
+static void vhost_worker_queue(struct vhost_worker *worker,
 			       struct vhost_work *work)
 {
-	if (!worker)
-		return false;
-	/*
-	 * vsock can queue while we do a VHOST_SET_OWNER, so we have a smp_wmb
-	 * when setting up the worker. We don't have a smp_rmb here because
-	 * test_and_set_bit gives us a mb already.
-	 */
 	if (!test_and_set_bit(VHOST_WORK_QUEUED, &work->flags)) {
 		/* We can only add the work to the list after we're
 		 * sure it was not in the list.
@@ -251,47 +244,85 @@ static bool vhost_worker_queue(struct vhost_worker
*worker,
 		llist_add(&work->node, &worker->work_list);
 		vhost_task_wake(worker->vtsk);
 	}
-
-	return true;
 }
 
 bool vhost_vq_work_queue(struct vhost_virtqueue *vq, struct vhost_work *work)
 {
-	return vhost_worker_queue(vq->worker, work);
+	struct vhost_worker *worker;
+	bool queued = false;
+
+	rcu_read_lock();
+	worker = rcu_dereference(vq->worker);
+	if (worker) {
+		queued = true;
+		vhost_worker_queue(worker, work);
+	}
+	rcu_read_unlock();
+
+	return queued;
 }
 EXPORT_SYMBOL_GPL(vhost_vq_work_queue);
 
-static void vhost_worker_flush(struct vhost_worker *worker)
+void vhost_vq_flush(struct vhost_virtqueue *vq)
 {
 	struct vhost_flush_struct flush;
 
 	init_completion(&flush.wait_event);
 	vhost_work_init(&flush.work, vhost_flush_work);
 
-	if (vhost_worker_queue(worker, &flush.work))
+	if (vhost_vq_work_queue(vq, &flush.work))
 		wait_for_completion(&flush.wait_event);
 }
+EXPORT_SYMBOL_GPL(vhost_vq_flush);
 
-void vhost_vq_flush(struct vhost_virtqueue *vq)
+/**
+ * vhost_worker_flush - flush a worker
+ * @worker: worker to flush
+ *
+ * This does not use RCU to protect the worker, so the device or worker
+ * mutex must be held.
+ */
+static void vhost_worker_flush(struct vhost_worker *worker)
 {
-	vhost_worker_flush(vq->worker);
+	struct vhost_flush_struct flush;
+
+	init_completion(&flush.wait_event);
+	vhost_work_init(&flush.work, vhost_flush_work);
+
+	vhost_worker_queue(worker, &flush.work);
+	wait_for_completion(&flush.wait_event);
 }
-EXPORT_SYMBOL_GPL(vhost_vq_flush);
 
 void vhost_dev_flush(struct vhost_dev *dev)
 {
 	struct vhost_worker *worker;
 	unsigned long i;
 
-	xa_for_each(&dev->worker_xa, i, worker)
+	xa_for_each(&dev->worker_xa, i, worker) {
+		mutex_lock(&worker->mutex);
+		if (!worker->attachment_cnt) {
+			mutex_unlock(&worker->mutex);
+			continue;
+		}
 		vhost_worker_flush(worker);
+		mutex_unlock(&worker->mutex);
+	}
 }
 EXPORT_SYMBOL_GPL(vhost_dev_flush);
 
 /* A lockless hint for busy polling code to exit the loop */
 bool vhost_vq_has_work(struct vhost_virtqueue *vq)
 {
-	return !llist_empty(&vq->worker->work_list);
+	struct vhost_worker *worker;
+	bool has_work = false;
+
+	rcu_read_lock();
+	worker = rcu_dereference(vq->worker);
+	if (worker && !llist_empty(&worker->work_list))
+		has_work = true;
+	rcu_read_unlock();
+
+	return has_work;
 }
 EXPORT_SYMBOL_GPL(vhost_vq_has_work);
 
@@ -356,7 +387,7 @@ static void vhost_vq_reset(struct vhost_dev *dev,
 	vq->busyloop_timeout = 0;
 	vq->umem = NULL;
 	vq->iotlb = NULL;
-	vq->worker = NULL;
+	rcu_assign_pointer(vq->worker, NULL);
 	vhost_vring_call_reset(&vq->call_ctx);
 	__vhost_vq_meta_reset(vq);
 }
@@ -578,7 +609,7 @@ static void vhost_workers_free(struct vhost_dev *dev)
 		return;
 
 	for (i = 0; i < dev->nvqs; i++)
-		dev->vqs[i]->worker = NULL;
+		rcu_assign_pointer(dev->vqs[i]->worker, NULL);
 	/*
 	 * Free the default worker we created and cleanup workers userspace
 	 * created but couldn't clean up (it forgot or crashed).
@@ -606,6 +637,7 @@ static struct vhost_worker *vhost_worker_create(struct
vhost_dev *dev)
 	if (!vtsk)
 		goto free_worker;
 
+	mutex_init(&worker->mutex);
 	init_llist_head(&worker->work_list);
 	worker->kcov_handle = kcov_common_handle();
 	worker->vtsk = vtsk;
@@ -630,13 +662,54 @@ static struct vhost_worker *vhost_worker_create(struct
vhost_dev *dev)
 static void __vhost_vq_attach_worker(struct vhost_virtqueue *vq,
 				     struct vhost_worker *worker)
 {
-	if (vq->worker)
-		vq->worker->attachment_cnt--;
+	struct vhost_worker *old_worker;
+
+	old_worker = rcu_dereference_check(vq->worker,
+					   lockdep_is_held(&vq->dev->mutex));
+
+	mutex_lock(&worker->mutex);
 	worker->attachment_cnt++;
-	vq->worker = worker;
+	mutex_unlock(&worker->mutex);
+	rcu_assign_pointer(vq->worker, worker);
+
+	if (!old_worker)
+		return;
+	/*
+	 * Take the worker mutex to make sure we see the work queued from
+	 * device wide flushes which doesn't use RCU for execution.
+	 */
+	mutex_lock(&old_worker->mutex);
+	old_worker->attachment_cnt--;
+	/*
+	 * We don't want to call synchronize_rcu for every vq during setup
+	 * because it will slow down VM startup. If we haven't done
+	 * VHOST_SET_VRING_KICK and not done the driver specific
+	 * SET_ENDPOINT/RUNNUNG then we can skip the sync since there will
+	 * not be any works queued for scsi and net.
+	 */
+	mutex_lock(&vq->mutex);
+	if (!vhost_vq_get_backend(vq) && !vq->kick) {
+		mutex_unlock(&vq->mutex);
+		mutex_unlock(&old_worker->mutex);
+		/*
+		 * vsock can queue anytime after VHOST_VSOCK_SET_GUEST_CID.
+		 * Warn if it adds support for multiple workers but forgets to
+		 * handle the early queueing case.
+		 */
+		WARN_ON(!old_worker->attachment_cnt &&
+			!llist_empty(&old_worker->work_list));
+		return;
+	}
+	mutex_unlock(&vq->mutex);
+
+	/* Make sure new vq queue/flush/poll calls see the new worker */
+	synchronize_rcu();
+	/* Make sure whatever was queued gets run */
+	vhost_worker_flush(old_worker);
+	mutex_unlock(&old_worker->mutex);
 }
 
- /* Caller must have device and virtqueue mutex */
+ /* Caller must have device mutex */
 static int vhost_vq_attach_worker(struct vhost_virtqueue *vq,
 				  struct vhost_vring_worker *info)
 {
@@ -647,15 +720,6 @@ static int vhost_vq_attach_worker(struct vhost_virtqueue
*vq,
 	if (!dev->use_worker)
 		return -EINVAL;
 
-	/*
-	 * We only allow userspace to set a virtqueue's worker if it's not
-	 * active and polling is not enabled. We also assume drivers
-	 * supporting this will not be internally queueing works directly or
-	 * via calls like vhost_dev_flush at this time.
-	 */
-	if (vhost_vq_get_backend(vq) || vq->kick)
-		return -EBUSY;
-
 	worker = xa_find(&dev->worker_xa, &index, UINT_MAX, XA_PRESENT);
 	if (!worker || worker->id != info->worker_id)
 		return -ENODEV;
@@ -689,8 +753,12 @@ static int vhost_free_worker(struct vhost_dev *dev,
 	if (!worker || worker->id != info->worker_id)
 		return -ENODEV;
 
-	if (worker->attachment_cnt)
+	mutex_lock(&worker->mutex);
+	if (worker->attachment_cnt) {
+		mutex_unlock(&worker->mutex);
 		return -EBUSY;
+	}
+	mutex_unlock(&worker->mutex);
 
 	vhost_worker_destroy(dev, worker);
 	return 0;
@@ -723,6 +791,7 @@ long vhost_worker_ioctl(struct vhost_dev *dev, unsigned int
ioctl,
 {
 	struct vhost_vring_worker ring_worker;
 	struct vhost_worker_state state;
+	struct vhost_worker *worker;
 	struct vhost_virtqueue *vq;
 	long ret;
 	u32 idx;
@@ -760,7 +829,6 @@ long vhost_worker_ioctl(struct vhost_dev *dev, unsigned int
ioctl,
 	if (ret)
 		return ret;
 
-	mutex_lock(&vq->mutex);
 	switch (ioctl) {
 	case VHOST_ATTACH_VRING_WORKER:
 		if (copy_from_user(&ring_worker, argp, sizeof(ring_worker))) {
@@ -771,8 +839,15 @@ long vhost_worker_ioctl(struct vhost_dev *dev, unsigned int
ioctl,
 		ret = vhost_vq_attach_worker(vq, &ring_worker);
 		break;
 	case VHOST_GET_VRING_WORKER:
+		worker = rcu_dereference_check(vq->worker,
+					       lockdep_is_held(&dev->mutex));
+		if (!worker) {
+			ret = -EINVAL;
+			break;
+		}
+
 		ring_worker.index = idx;
-		ring_worker.worker_id = vq->worker->id;
+		ring_worker.worker_id = worker->id;
 
 		if (copy_to_user(argp, &ring_worker, sizeof(ring_worker)))
 			ret = -EFAULT;
@@ -782,7 +857,6 @@ long vhost_worker_ioctl(struct vhost_dev *dev, unsigned int
ioctl,
 		break;
 	}
 
-	mutex_unlock(&vq->mutex);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(vhost_worker_ioctl);
@@ -817,11 +891,6 @@ long vhost_dev_set_owner(struct vhost_dev *dev)
 			err = -ENOMEM;
 			goto err_worker;
 		}
-		/*
-		 * vsock can already try to queue so make sure the worker
-		 * is setup before vhost_vq_work_queue sees vq->worker is set.
-		 */
-		smp_wmb();
 
 		for (i = 0; i < dev->nvqs; i++)
 			__vhost_vq_attach_worker(dev->vqs[i], worker);
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 039be5d56867..f60d5f7bef94 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -28,6 +28,8 @@ struct vhost_work {
 
 struct vhost_worker {
 	struct vhost_task	*vtsk;
+	/* Used to serialize device wide flushing with worker swapping. */
+	struct mutex		mutex;
 	struct llist_head	work_list;
 	u64			kcov_handle;
 	u32			id;
@@ -76,7 +78,7 @@ struct vhost_vring_call {
 /* The virtqueue structure describes a queue attached to a device. */
 struct vhost_virtqueue {
 	struct vhost_dev *dev;
-	struct vhost_worker *worker;
+	struct vhost_worker __rcu *worker;
 
 	/* The actual ring of buffers. */
 	struct mutex mutex;
diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
index 96dc146c2d15..f5c48b61ab62 100644
--- a/include/uapi/linux/vhost.h
+++ b/include/uapi/linux/vhost.h
@@ -90,9 +90,7 @@
 #define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct
vhost_vring_state)
 #define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct
vhost_vring_state)
 /* Attach a vhost_worker created with VHOST_NEW_WORKER to one of the
device's
- * virtqueues. This must be done before VHOST_SET_VRING_KICK and the driver
- * specific ioctl to activate the virtqueue (VHOST_SCSI_SET_ENDPOINT,
- * VHOST_NET_SET_BACKEND, VHOST_VSOCK_SET_RUNNING) has been run.
+ * virtqueues.
  *
  * This will replace the virtqueue's existing worker. If the replaced
worker
  * is no longer attached to any virtqueues, it can be freed with
-- 
2.25.1

Linux Virtualization - Jun 2023 - [PATCH v9 06/17] vhost: take worker or vq for flushing

[PATCH v9 00/17] vhost: multiple worker support

[PATCH v9 01/17] vhost: create worker at end of vhost_dev_set_owner

[PATCH v9 02/17] vhost: dynamically allocate vhost_worker

[PATCH v9 03/17] vhost: add vhost_worker pointer to vhost_virtqueue

[PATCH v9 04/17] vhost, vhost_net: add helper to check if vq has work

[PATCH v9 05/17] vhost: take worker or vq instead of dev for queueing

[PATCH v9 06/17] vhost: take worker or vq for flushing

[PATCH v9 07/17] vhost: convert poll work to be vq based

[PATCH v9 08/17] vhost_sock: convert to vhost_vq_work_queue

[PATCH v9 09/17] vhost_scsi: make SCSI cmd completion per vq

[PATCH v9 10/17] vhost_scsi: convert to vhost_vq_work_queue

[PATCH v9 11/17] vhost_scsi: flush IO vqs then send TMF rsp

[PATCH v9 12/17] vhost: remove vhost_work_queue

[PATCH v9 13/17] vhost: add helper to parse userspace vring state/file

[PATCH v9 14/17] vhost: replace single worker pointer with xarray

[PATCH v9 15/17] vhost: allow userspace to create workers

[PATCH v9 16/17] vhost_scsi: add support for worker ioctls

[PATCH v9 17/17] vhost: Allow worker switching while work is queueing