thr3ads.net - Linux Virtualization - [Sound-open-firmware] [PATCH 5/6] vhost: add an rpmsg API [May 2020]

If this information is useful, please help other people find it:
Share via:

Guennadi Liakhovetski

2020-May-16 10:11 UTC

[PATCH 0/6] Add a vhost RPMsg API

Linux supports RPMsg over VirtIO for "remote processor" /AMP use
cases. It can however also be used for virtualisation scenarios,
e.g. when using KVM to run Linux on both the host and the guests.
This patch set adds a wrapper API to facilitate writing vhost
drivers for such RPMsg-based solutions. The first use case is an
audio DSP virtualisation project, currently under development, ready
for review and submission, available at
https://github.com/thesofproject/linux/pull/1501/commits
A further patch for the ADSP vhost RPMsg driver will be sent
separately for review only since it cannot be merged without audio
patches being upstreamed first.

Thanks
Guennadi

Guennadi Liakhovetski (6):
  vhost: convert VHOST_VSOCK_SET_RUNNING to a generic ioctl
  vhost: (cosmetic) remove a superfluous variable initialisation
  rpmsg: move common structures and defines to headers
  rpmsg: update documentation
  vhost: add an rpmsg API
  rpmsg: add a device ID to also bind to the ADSP device

 Documentation/rpmsg.txt          |   2 +-
 drivers/rpmsg/virtio_rpmsg_bus.c |  79 +--------
 drivers/vhost/Kconfig            |   8 +
 drivers/vhost/Makefile           |   3 +
 drivers/vhost/rpmsg.c            | 372 +++++++++++++++++++++++++++++++++++++++
 drivers/vhost/vhost.c            |   2 +-
 drivers/vhost/vhost_rpmsg.h      |  74 ++++++++
 include/linux/virtio_rpmsg.h     |  81 +++++++++
 include/uapi/linux/rpmsg.h       |   3 +
 include/uapi/linux/vhost.h       |   4 +-
 10 files changed, 549 insertions(+), 79 deletions(-)
 create mode 100644 drivers/vhost/rpmsg.c
 create mode 100644 drivers/vhost/vhost_rpmsg.h
 create mode 100644 include/linux/virtio_rpmsg.h

-- 
1.9.3

Guennadi Liakhovetski

2020-May-16 10:11 UTC

head link

[PATCH 1/6] vhost: convert VHOST_VSOCK_SET_RUNNING to a generic ioctl

VHOST_VSOCK_SET_RUNNING is used by the vhost vsock driver to perform
crucial VirtQueue initialisation, like assigning .private fields and
calling vhost_vq_init_access(), and clean up. However, this ioctl is
actually extremely useful for any vhost driver, that doesn't have a
side channel to inform it of a status change, e.g. upon a guest
reboot. This patch makes that ioctl generic, while preserving its
numeric value and also keeping the original alias.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski at
linux.intel.com>
---
 include/uapi/linux/vhost.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
index 9fe72e4..b54af9d 100644
--- a/include/uapi/linux/vhost.h
+++ b/include/uapi/linux/vhost.h
@@ -93,6 +93,8 @@
 #define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64)
 #define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64)
 
+#define VHOST_SET_RUNNING _IOW(VHOST_VIRTIO, 0x61, int)
+
 /* VHOST_NET specific defines */
 
 /* Attach virtio net ring to a raw socket, or tap device.
@@ -114,7 +116,7 @@
 /* VHOST_VSOCK specific defines */
 
 #define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
-#define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)
+#define VHOST_VSOCK_SET_RUNNING		VHOST_SET_RUNNING
 
 /* VHOST_VDPA specific defines */
 
-- 
1.9.3

Guennadi Liakhovetski

2020-May-16 10:11 UTC

head link

[PATCH 2/6] vhost: (cosmetic) remove a superfluous variable initialisation

Even the compiler is able to figure out that in this case the
initialisation is superfluous.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski at
linux.intel.com>
---
 drivers/vhost/vhost.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 47060d8..e22d4a9 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -895,7 +895,7 @@ static inline void __user *__vhost_get_user(struct
vhost_virtqueue *vq,
 
 #define vhost_put_user(vq, x, ptr)		\
 ({ \
-	int ret = -EFAULT; \
+	int ret; \
 	if (!vq->iotlb) { \
 		ret = __put_user(x, ptr); \
 	} else { \
-- 
1.9.3

Guennadi Liakhovetski

2020-May-16 10:11 UTC

head link

[PATCH 3/6] rpmsg: move common structures and defines to headers

virtio_rpmsg_bus.c keeps RPMsg protocol structure declarations and
common defines like the ones, needed for name-space announcements,
internal. Move them to common headers instead.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski at
linux.intel.com>
---
 drivers/rpmsg/virtio_rpmsg_bus.c | 78 +-------------------------------------
 include/linux/virtio_rpmsg.h     | 81 ++++++++++++++++++++++++++++++++++++++++
 include/uapi/linux/rpmsg.h       |  3 ++
 3 files changed, 86 insertions(+), 76 deletions(-)
 create mode 100644 include/linux/virtio_rpmsg.h

diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index 07d4f33..f3bd050 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -25,7 +25,9 @@
 #include <linux/virtio.h>
 #include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
+#include <linux/virtio_rpmsg.h>
 #include <linux/wait.h>
+#include <uapi/linux/rpmsg.h>
 
 #include "rpmsg_internal.h"
 
@@ -69,58 +71,6 @@ struct virtproc_info {
 	struct rpmsg_endpoint *ns_ept;
 };
 
-/* The feature bitmap for virtio rpmsg */
-#define VIRTIO_RPMSG_F_NS	0 /* RP supports name service notifications */
-
-/**
- * struct rpmsg_hdr - common header for all rpmsg messages
- * @src: source address
- * @dst: destination address
- * @reserved: reserved for future use
- * @len: length of payload (in bytes)
- * @flags: message flags
- * @data: @len bytes of message payload data
- *
- * Every message sent(/received) on the rpmsg bus begins with this header.
- */
-struct rpmsg_hdr {
-	u32 src;
-	u32 dst;
-	u32 reserved;
-	u16 len;
-	u16 flags;
-	u8 data[];
-} __packed;
-
-/**
- * struct rpmsg_ns_msg - dynamic name service announcement message
- * @name: name of remote service that is published
- * @addr: address of remote service that is published
- * @flags: indicates whether service is created or destroyed
- *
- * This message is sent across to publish a new service, or announce
- * about its removal. When we receive these messages, an appropriate
- * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
- * or ->remove() handler of the appropriate rpmsg driver will be invoked
- * (if/as-soon-as one is registered).
- */
-struct rpmsg_ns_msg {
-	char name[RPMSG_NAME_SIZE];
-	u32 addr;
-	u32 flags;
-} __packed;
-
-/**
- * enum rpmsg_ns_flags - dynamic name service announcement flags
- *
- * @RPMSG_NS_CREATE: a new remote service was just created
- * @RPMSG_NS_DESTROY: a known remote service was just destroyed
- */
-enum rpmsg_ns_flags {
-	RPMSG_NS_CREATE		= 0,
-	RPMSG_NS_DESTROY	= 1,
-};
-
 /**
  * @vrp: the remote processor this channel belongs to
  */
@@ -134,36 +84,12 @@ struct virtio_rpmsg_channel {
 	container_of(_rpdev, struct virtio_rpmsg_channel, rpdev)
 
 /*
- * We're allocating buffers of 512 bytes each for communications. The
- * number of buffers will be computed from the number of buffers supported
- * by the vring, upto a maximum of 512 buffers (256 in each direction).
- *
- * Each buffer will have 16 bytes for the msg header and 496 bytes for
- * the payload.
- *
- * This will utilize a maximum total space of 256KB for the buffers.
- *
- * We might also want to add support for user-provided buffers in time.
- * This will allow bigger buffer size flexibility, and can also be used
- * to achieve zero-copy messaging.
- *
- * Note that these numbers are purely a decision of this driver - we
- * can change this without changing anything in the firmware of the remote
- * processor.
- */
-#define MAX_RPMSG_NUM_BUFS	(512)
-#define MAX_RPMSG_BUF_SIZE	(512)
-
-/*
  * Local addresses are dynamically allocated on-demand.
  * We do not dynamically assign addresses from the low 1024 range,
  * in order to reserve that address range for predefined services.
  */
 #define RPMSG_RESERVED_ADDRESSES	(1024)
 
-/* Address 53 is reserved for advertising remote services */
-#define RPMSG_NS_ADDR			(53)
-
 static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept);
 static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len);
 static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len,
diff --git a/include/linux/virtio_rpmsg.h b/include/linux/virtio_rpmsg.h
new file mode 100644
index 00000000..bf2fd69
--- /dev/null
+++ b/include/linux/virtio_rpmsg.h
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#ifndef _LINUX_VIRTIO_RPMSG_H
+#define _LINUX_VIRTIO_RPMSG_H
+
+#include <linux/mod_devicetable.h>
+
+/* Address 53 is reserved for advertising remote services */
+#define RPMSG_NS_ADDR			(53)
+
+/*
+ * We're allocating buffers of 512 bytes each for communications. The
+ * number of buffers will be computed from the number of buffers supported
+ * by the vring, upto a maximum of 512 buffers (256 in each direction).
+ *
+ * Each buffer will have 16 bytes for the msg header and 496 bytes for
+ * the payload.
+ *
+ * This will utilize a maximum total space of 256KB for the buffers.
+ *
+ * We might also want to add support for user-provided buffers in time.
+ * This will allow bigger buffer size flexibility, and can also be used
+ * to achieve zero-copy messaging.
+ *
+ * Note that these numbers are purely a decision of this driver - we
+ * can change this without changing anything in the firmware of the remote
+ * processor.
+ */
+#define MAX_RPMSG_NUM_BUFS	512
+#define MAX_RPMSG_BUF_SIZE	512
+
+/**
+ * struct rpmsg_hdr - common header for all rpmsg messages
+ * @src: source address
+ * @dst: destination address
+ * @reserved: reserved for future use
+ * @len: length of payload (in bytes)
+ * @flags: message flags
+ * @data: @len bytes of message payload data
+ *
+ * Every message sent(/received) on the rpmsg bus begins with this header.
+ */
+struct rpmsg_hdr {
+	u32 src;
+	u32 dst;
+	u32 reserved;
+	u16 len;
+	u16 flags;
+	u8 data[];
+} __packed;
+
+/**
+ * struct rpmsg_ns_msg - dynamic name service announcement message
+ * @name: name of remote service that is published
+ * @addr: address of remote service that is published
+ * @flags: indicates whether service is created or destroyed
+ *
+ * This message is sent across to publish a new service, or announce
+ * about its removal. When we receive these messages, an appropriate
+ * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
+ * or ->remove() handler of the appropriate rpmsg driver will be invoked
+ * (if/as-soon-as one is registered).
+ */
+struct rpmsg_ns_msg {
+	char name[RPMSG_NAME_SIZE];
+	u32 addr;
+	u32 flags;
+} __packed;
+
+/**
+ * enum rpmsg_ns_flags - dynamic name service announcement flags
+ *
+ * @RPMSG_NS_CREATE: a new remote service was just created
+ * @RPMSG_NS_DESTROY: a known remote service was just destroyed
+ */
+enum rpmsg_ns_flags {
+	RPMSG_NS_CREATE		= 0,
+	RPMSG_NS_DESTROY	= 1,
+};
+
+#endif
diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h
index e14c6da..d669c04 100644
--- a/include/uapi/linux/rpmsg.h
+++ b/include/uapi/linux/rpmsg.h
@@ -24,4 +24,7 @@ struct rpmsg_endpoint_info {
 #define RPMSG_CREATE_EPT_IOCTL	_IOW(0xb5, 0x1, struct rpmsg_endpoint_info)
 #define RPMSG_DESTROY_EPT_IOCTL	_IO(0xb5, 0x2)
 
+/* The feature bitmap for virtio rpmsg */
+#define VIRTIO_RPMSG_F_NS	0 /* RP supports name service notifications */
+
 #endif
-- 
1.9.3

Guennadi Liakhovetski

2020-May-16 10:11 UTC

head link

[PATCH 4/6] rpmsg: update documentation

rpmsg_create_ept() takes struct rpmsg_channel_info chinfo as its last
argument, not a u32 value.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski at
linux.intel.com>
---
 Documentation/rpmsg.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/rpmsg.txt b/Documentation/rpmsg.txt
index 24b7a9e..4f9bc4f 100644
--- a/Documentation/rpmsg.txt
+++ b/Documentation/rpmsg.txt
@@ -194,7 +194,7 @@ Returns 0 on success and an appropriate error value on
failure.
 
   struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_channel *rpdev,
 		void (*cb)(struct rpmsg_channel *, void *, int, void *, u32),
-		void *priv, u32 addr);
+		void *priv, struct rpmsg_channel_info chinfo);
 
 every rpmsg address in the system is bound to an rx callback (so when
 inbound messages arrive, they are dispatched by the rpmsg bus using the
-- 
1.9.3

Guennadi Liakhovetski

2020-May-16 10:11 UTC

head link

[PATCH 5/6] vhost: add an rpmsg API

Linux supports running the RPMsg protocol over the VirtIO transport
protocol, but currently there is only support for VirtIO clients and
no support for a VirtIO server. This patch adds a vhost-based RPMsg
server implementation.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski at
linux.intel.com>
---
 drivers/vhost/Kconfig       |   8 +
 drivers/vhost/Makefile      |   3 +
 drivers/vhost/rpmsg.c       | 372 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/vhost/vhost_rpmsg.h |  74 +++++++++
 4 files changed, 457 insertions(+)
 create mode 100644 drivers/vhost/rpmsg.c
 create mode 100644 drivers/vhost/vhost_rpmsg.h

diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig
index 2c75d16..4ebc871 100644
--- a/drivers/vhost/Kconfig
+++ b/drivers/vhost/Kconfig
@@ -38,6 +38,14 @@ config VHOST_NET
 	  To compile this driver as a module, choose M here: the module will
 	  be called vhost_net.
 
+config VHOST_RPMSG
+	tristate
+	depends on VHOST
+	default n
+	---help---
+	  Vhost RPMSG API allows vhost drivers to communicate with VirtIO
+	  drivers, using the RPMsg over VirtIO protocol.
+
 config VHOST_SCSI
 	tristate "VHOST_SCSI TCM fabric driver"
 	depends on TARGET_CORE && EVENTFD
diff --git a/drivers/vhost/Makefile b/drivers/vhost/Makefile
index f3e1897..9cf459d 100644
--- a/drivers/vhost/Makefile
+++ b/drivers/vhost/Makefile
@@ -2,6 +2,9 @@
 obj-$(CONFIG_VHOST_NET) += vhost_net.o
 vhost_net-y := net.o
 
+obj-$(CONFIG_VHOST_RPMSG) += vhost_rpmsg.o
+vhost_rpmsg-y := rpmsg.o
+
 obj-$(CONFIG_VHOST_SCSI) += vhost_scsi.o
 vhost_scsi-y := scsi.o
 
diff --git a/drivers/vhost/rpmsg.c b/drivers/vhost/rpmsg.c
new file mode 100644
index 00000000..2fa82bd
--- /dev/null
+++ b/drivers/vhost/rpmsg.c
@@ -0,0 +1,372 @@
+/* SPDX-License-Identifier: (GPL-2.0-only) */
+/*
+ * Copyright(c) 2020 Intel Corporation. All rights reserved.
+ *
+ * Author: Guennadi Liakhovetski <guennadi.liakhovetski at
linux.intel.com>
+ *
+ * vhost-RPMsg VirtIO interface
+ */
+
+#include <linux/compat.h>
+#include <linux/file.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/vhost.h>
+#include <linux/virtio_rpmsg.h>
+#include <uapi/linux/rpmsg.h>
+
+#include "vhost.h"
+#include "vhost_rpmsg.h"
+
+/*
+ * All virtio-rpmsg virtual queue kicks always come with just one buffer -
+ * either input or output
+ */
+static int vhost_rpmsg_get_single(struct vhost_virtqueue *vq)
+{
+	struct vhost_rpmsg *vr = container_of(vq->dev, struct vhost_rpmsg, dev);
+	unsigned int out, in;
+	int head = vhost_get_vq_desc(vq, vq->iov, ARRAY_SIZE(vq->iov),
+				     &out, &in, NULL, NULL);
+	if (head < 0) {
+		vq_err(vq, "%s(): error %d getting buffer\n",
+		       __func__, head);
+		return head;
+	}
+
+	/* Nothing new? */
+	if (head == vq->num)
+		return head;
+
+	if (vq == &vr->vq[VIRTIO_RPMSG_RESPONSE] && (out || in != 1)) {
+		vq_err(vq,
+		       "%s(): invalid %d input and %d output in response queue\n",
+		       __func__, in, out);
+		goto return_buf;
+	}
+
+	if (vq == &vr->vq[VIRTIO_RPMSG_REQUEST] && (in || out != 1)) {
+		vq_err(vq,
+		       "%s(): invalid %d input and %d output in request queue\n",
+		       __func__, in, out);
+		goto return_buf;
+	}
+
+	return head;
+
+return_buf:
+	/*
+	 * FIXME: might need to return the buffer using vhost_add_used()
+	 * or vhost_discard_vq_desc(). vhost_discard_vq_desc() is
+	 * described as "being useful for error handling," but it makes
+	 * the thus discarded buffers "unseen," so next time we look we
+	 * retrieve them again?
+	 */
+	return -EINVAL;
+}
+
+static const struct vhost_rpmsg_ept *vhost_rpmsg_ept_find(struct vhost_rpmsg
*vr,
+							  int addr)
+{
+	unsigned int i;
+
+	for (i = 0; i < vr->n_epts; i++)
+		if (vr->ept[i].addr == addr)
+			return vr->ept + i;
+
+	return NULL;
+}
+
+/*
+ * if len < 0, then for reading a request, the complete virtual queue buffer
+ * size is prepared, for sending a response, the length in the iterator is used
+ */
+int vhost_rpmsg_start_lock(struct vhost_rpmsg *vr,
+			   struct vhost_rpmsg_iter *iter,
+			   unsigned int qid, ssize_t len)
+	__acquires(vq->mutex)
+{
+	struct vhost_virtqueue *vq = vr->vq + qid;
+	size_t tmp;
+
+	if (qid >= VIRTIO_RPMSG_NUM_OF_VQS)
+		return -EINVAL;
+
+	iter->vq = vq;
+
+	mutex_lock(&vq->mutex);
+	vhost_disable_notify(&vr->dev, vq);
+
+	iter->head = vhost_rpmsg_get_single(vq);
+	if (iter->head == vq->num)
+		iter->head = -EAGAIN;
+
+	if (iter->head < 0)
+		goto unlock;
+
+	tmp = vq->iov[0].iov_len;
+	if (tmp < sizeof(iter->rhdr)) {
+		vq_err(vq, "%s(): size %zu too small\n", __func__, tmp);
+		iter->head = -ENOBUFS;
+		goto return_buf;
+	}
+
+	switch (qid) {
+	case VIRTIO_RPMSG_REQUEST:
+		if (len < 0) {
+			len = tmp - sizeof(iter->rhdr);
+		} else if (tmp < sizeof(iter->rhdr) + len) {
+			iter->head = -ENOBUFS;
+			goto return_buf;
+		}
+
+		/* len is now the size of the payload */
+		iov_iter_init(&iter->iov_iter, WRITE,
+			      vq->iov, 1, sizeof(iter->rhdr) + len);
+
+		/* Read the RPMSG header with endpoint addresses */
+		tmp = copy_from_iter(&iter->rhdr, sizeof(iter->rhdr),
+				     &iter->iov_iter);
+		if (tmp != sizeof(iter->rhdr)) {
+			vq_err(vq, "%s(): got %zu instead of %zu\n", __func__,
+			       tmp, sizeof(iter->rhdr));
+			iter->head = -EIO;
+			goto return_buf;
+		}
+
+		iter->ept = vhost_rpmsg_ept_find(vr, iter->rhdr.dst);
+		if (!iter->ept) {
+			vq_err(vq, "%s(): no endpoint with address %d\n",
+			       __func__, iter->rhdr.dst);
+			iter->head = -ENOENT;
+			goto return_buf;
+		}
+
+		/* Let the endpoint read the payload */
+		if (iter->ept->read) {
+			ssize_t ret = iter->ept->read(vr, iter);
+			if (ret < 0) {
+				iter->head = ret;
+				goto return_buf;
+			}
+
+			iter->rhdr.len = ret;
+		} else {
+			iter->rhdr.len = 0;
+		}
+
+		/* Prepare for the response phase */
+		iter->rhdr.dst = iter->rhdr.src;
+		iter->rhdr.src = iter->ept->addr;
+
+		break;
+	case VIRTIO_RPMSG_RESPONSE:
+		if (!iter->ept && iter->rhdr.dst != RPMSG_NS_ADDR) {
+			/*
+			 * Usually the iterator is configured when processing a
+			 * message on the request queue, but it's also possible
+			 * to send a message on the response queue without a
+			 * preceding request, in that case the iterator must
+			 * contain source and destination addresses.
+			 */
+			iter->ept = vhost_rpmsg_ept_find(vr, iter->rhdr.src);
+			if (!iter->ept) {
+				iter->head = -ENOENT;
+				goto return_buf;
+			}
+		}
+
+		if (len < 0) {
+			len = tmp - sizeof(iter->rhdr);
+		} else if (tmp < sizeof(iter->rhdr) + len) {
+			iter->head = -ENOBUFS;
+			goto return_buf;
+		} else {
+			iter->rhdr.len = len;
+		}
+
+		/* len is now the size of the payload */
+		iov_iter_init(&iter->iov_iter, READ,
+			      vq->iov, 1, sizeof(iter->rhdr) + len);
+
+		/* Write the RPMSG header with endpoint addresses */
+		tmp = copy_to_iter(&iter->rhdr, sizeof(iter->rhdr),
+				   &iter->iov_iter);
+		if (tmp != sizeof(iter->rhdr)) {
+			iter->head = -EIO;
+			goto return_buf;
+		}
+
+		/* Let the endpoint write the payload */
+		if (iter->ept && iter->ept->write) {
+			ssize_t ret = iter->ept->write(vr, iter);
+			if (ret < 0) {
+				iter->head = ret;
+				goto return_buf;
+			}
+		}
+
+		break;
+	}
+
+	return 0;
+
+return_buf:
+	/*
+	 * FIXME: vhost_discard_vq_desc() or vhost_add_used(), see comment in
+	 * vhost_rpmsg_get_single()
+	 */
+unlock:
+	vhost_enable_notify(&vr->dev, vq);
+	mutex_unlock(&vq->mutex);
+
+	return iter->head;
+}
+EXPORT_SYMBOL_GPL(vhost_rpmsg_start_lock);
+
+size_t vhost_rpmsg_copy(struct vhost_rpmsg *vr, struct vhost_rpmsg_iter *iter,
+			void *data, size_t size)
+{
+	/*
+	 * We could check for excess data, but copy_{to,from}_iter() don't do
+	 * that either
+	 */
+	if (iter->vq == vr->vq + VIRTIO_RPMSG_RESPONSE)
+		return copy_to_iter(data, size, &iter->iov_iter);
+
+	return copy_from_iter(data, size, &iter->iov_iter);
+}
+EXPORT_SYMBOL_GPL(vhost_rpmsg_copy);
+
+int vhost_rpmsg_finish_unlock(struct vhost_rpmsg *vr,
+			      struct vhost_rpmsg_iter *iter)
+	__releases(vq->mutex)
+{
+	if (iter->head >= 0)
+		vhost_add_used_and_signal(iter->vq->dev, iter->vq, iter->head,
+					  iter->rhdr.len + sizeof(iter->rhdr));
+
+	vhost_enable_notify(&vr->dev, iter->vq);
+	mutex_unlock(&iter->vq->mutex);
+
+	return iter->head;
+}
+EXPORT_SYMBOL_GPL(vhost_rpmsg_finish_unlock);
+
+/*
+ * Return false to terminate the external loop only if we fail to obtain either
+ * a request or a response buffer
+ */
+static bool handle_rpmsg_req_single(struct vhost_rpmsg *vr,
+				    struct vhost_virtqueue *vq)
+{
+	struct vhost_rpmsg_iter iter;
+	int ret = vhost_rpmsg_start_lock(vr, &iter, VIRTIO_RPMSG_REQUEST,
+					 -EINVAL);
+	if (!ret)
+		ret = vhost_rpmsg_finish_unlock(vr, &iter);
+	if (ret < 0) {
+		if (ret != -EAGAIN)
+			vq_err(vq, "%s(): RPMSG processing failed %d\n",
+			       __func__, ret);
+		return false;
+	}
+
+	if (!iter.ept->write)
+		return true;
+
+	ret = vhost_rpmsg_start_lock(vr, &iter, VIRTIO_RPMSG_RESPONSE,
+				     -EINVAL);
+	if (!ret)
+		ret = vhost_rpmsg_finish_unlock(vr, &iter);
+	if (ret < 0) {
+		vq_err(vq, "%s(): RPMSG finalising failed %d\n", __func__, ret);
+		return false;
+	}
+
+	return true;
+}
+
+static void handle_rpmsg_req_kick(struct vhost_work *work)
+{
+	struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue,
+						  poll.work);
+	struct vhost_rpmsg *vr = container_of(vq->dev, struct vhost_rpmsg, dev);
+
+	while (handle_rpmsg_req_single(vr, vq))
+		;
+}
+
+/*
+ * initialise two virtqueues with an array of endpoints,
+ * request and response callbacks
+ */
+void vhost_rpmsg_init(struct vhost_rpmsg *vr, const struct vhost_rpmsg_ept
*ept,
+		      unsigned int n_epts)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(vr->vq); i++)
+		vr->vq_p[i] = &vr->vq[i];
+
+	/* vq[0]: host -> guest, vq[1]: host <- guest */
+	vr->vq[VIRTIO_RPMSG_REQUEST].handle_kick = handle_rpmsg_req_kick;
+
+	vr->ept = ept;
+	vr->n_epts = n_epts;
+
+	vhost_dev_init(&vr->dev, vr->vq_p, VIRTIO_RPMSG_NUM_OF_VQS,
+		       UIO_MAXIOV, 0, 0);
+}
+EXPORT_SYMBOL_GPL(vhost_rpmsg_init);
+
+void vhost_rpmsg_destroy(struct vhost_rpmsg *vr)
+{
+	if (vhost_dev_has_owner(&vr->dev))
+		vhost_poll_flush(&vr->vq[VIRTIO_RPMSG_REQUEST].poll);
+
+	vhost_dev_cleanup(&vr->dev);
+}
+EXPORT_SYMBOL_GPL(vhost_rpmsg_destroy);
+
+/* send namespace */
+int vhost_rpmsg_ns_announce(struct vhost_rpmsg *vr, const char *name,
+			    unsigned int src)
+{
+	struct vhost_rpmsg_iter iter = {
+		.rhdr = {
+			.src = 0,
+			.dst = RPMSG_NS_ADDR,
+			.flags = RPMSG_NS_CREATE, /* rpmsg_recv_single() */
+		},
+	};
+	struct rpmsg_ns_msg ns = {
+		.addr = src,
+		.flags = RPMSG_NS_CREATE, /* for rpmsg_ns_cb() */
+	};
+	int ret = vhost_rpmsg_start_lock(vr, &iter, VIRTIO_RPMSG_RESPONSE,
+					 sizeof(ns));
+
+	if (ret < 0)
+		return ret;
+
+	strlcpy(ns.name, name, sizeof(ns.name));
+
+	ret = vhost_rpmsg_copy(vr, &iter, &ns, sizeof(ns));
+	if (ret != sizeof(ns))
+		vq_err(iter.vq, "%s(): added %d instead of %zu bytes\n",
+		       __func__, ret, sizeof(ns));
+
+	ret = vhost_rpmsg_finish_unlock(vr, &iter);
+	if (ret < 0)
+		vq_err(iter.vq, "%s(): namespace announcement failed: %d\n",
+		       __func__, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(vhost_rpmsg_ns_announce);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Intel, Inc.");
+MODULE_DESCRIPTION("Vhost RPMsg API");
diff --git a/drivers/vhost/vhost_rpmsg.h b/drivers/vhost/vhost_rpmsg.h
new file mode 100644
index 00000000..5248ac9
--- /dev/null
+++ b/drivers/vhost/vhost_rpmsg.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: (GPL-2.0) */
+/*
+ * Copyright(c) 2020 Intel Corporation. All rights reserved.
+ *
+ * Author: Guennadi Liakhovetski <guennadi.liakhovetski at
linux.intel.com>
+ */
+
+#ifndef VHOST_RPMSG_H
+#define VHOST_RPMSG_H
+
+#include <linux/uio.h>
+#include <linux/virtio_rpmsg.h>
+
+#include "vhost.h"
+
+/* RPMsg uses two VirtQueues: one for each direction */
+enum {
+	VIRTIO_RPMSG_RESPONSE,	/* RPMsg response (host->guest) buffers */
+	VIRTIO_RPMSG_REQUEST,	/* RPMsg request (guest->host) buffers */
+	/* Keep last */
+	VIRTIO_RPMSG_NUM_OF_VQS,
+};
+
+struct vhost_rpmsg_ept;
+
+struct vhost_rpmsg_iter {
+	struct iov_iter iov_iter;
+	struct rpmsg_hdr rhdr;
+	struct vhost_virtqueue *vq;
+	const struct vhost_rpmsg_ept *ept;
+	int head;
+	void *priv;
+};
+
+struct vhost_rpmsg {
+	struct vhost_dev dev;
+	struct vhost_virtqueue vq[VIRTIO_RPMSG_NUM_OF_VQS];
+	struct vhost_virtqueue *vq_p[VIRTIO_RPMSG_NUM_OF_VQS];
+	const struct vhost_rpmsg_ept *ept;
+	unsigned int n_epts;
+};
+
+struct vhost_rpmsg_ept {
+	ssize_t (*read)(struct vhost_rpmsg *, struct vhost_rpmsg_iter *);
+	ssize_t (*write)(struct vhost_rpmsg *, struct vhost_rpmsg_iter *);
+	int addr;
+};
+
+static inline size_t vhost_rpmsg_iter_len(const struct vhost_rpmsg_iter *iter)
+{
+	return iter->rhdr.len;
+}
+
+#define VHOST_RPMSG_ITER(_src, _dst) {	\
+	.rhdr = {			\
+			.src = _src,	\
+			.dst = _dst,	\
+		},			\
+	}
+
+void vhost_rpmsg_init(struct vhost_rpmsg *vr, const struct vhost_rpmsg_ept
*ept,
+		      unsigned int n_epts);
+void vhost_rpmsg_destroy(struct vhost_rpmsg *vr);
+int vhost_rpmsg_ns_announce(struct vhost_rpmsg *vr, const char *name,
+			    unsigned int src);
+int vhost_rpmsg_start_lock(struct vhost_rpmsg *vr,
+			   struct vhost_rpmsg_iter *iter,
+			   unsigned int qid, ssize_t len);
+size_t vhost_rpmsg_copy(struct vhost_rpmsg *vr, struct vhost_rpmsg_iter *iter,
+			void *data, size_t size);
+int vhost_rpmsg_finish_unlock(struct vhost_rpmsg *vr,
+			      struct vhost_rpmsg_iter *iter);
+
+#endif
-- 
1.9.3

Guennadi Liakhovetski

2020-May-16 10:11 UTC

head link

[PATCH 6/6] rpmsg: add a device ID to also bind to the ADSP device

The ADSP device uses the RPMsg API to connect vhost and VirtIO SOF
Audio DSP drivers on KVM host and guest.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski at
linux.intel.com>
---
 drivers/rpmsg/virtio_rpmsg_bus.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index f3bd050..ebe3f19 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -949,6 +949,7 @@ static void rpmsg_remove(struct virtio_device *vdev)
 
 static struct virtio_device_id id_table[] = {
 	{ VIRTIO_ID_RPMSG, VIRTIO_DEV_ANY_ID },
+	{ VIRTIO_ID_ADSP, VIRTIO_DEV_ANY_ID },
 	{ 0 },
 };
 
-- 
1.9.3

kbuild test robot

2020-May-16 11:26 UTC

head link

[PATCH 6/6] rpmsg: add a device ID to also bind to the ADSP device

Hi Guennadi,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on next-20200515]
[cannot apply to vhost/linux-next linus/master v5.7-rc5 v5.7-rc4 v5.7-rc3
v5.7-rc5]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to
specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:   
https://github.com/0day-ci/linux/commits/Guennadi-Liakhovetski/Add-a-vhost-RPMsg-API/20200516-181559
base:    bdecf38f228bcca73b31ada98b5b7ba1215eb9c9
config: i386-allyesconfig (attached as .config)
compiler: gcc-7 (Ubuntu 7.5.0-6ubuntu2) 7.5.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kbuild test robot <lkp at intel.com>

All errors (new ones prefixed by >>, old ones prefixed by <<):
>> drivers/rpmsg/virtio_rpmsg_bus.c:952:4: error: 'VIRTIO_ID_ADSP'
undeclared here (not in a function); did you mean 'VIRTIO_ID_FS'?{ VIRTIO_ID_ADSP, VIRTIO_DEV_ANY_ID },
^~~~~~~~~~~~~~
VIRTIO_ID_FS

vim +952 drivers/rpmsg/virtio_rpmsg_bus.c

   949	
   950	static struct virtio_device_id id_table[] = {
   951		{ VIRTIO_ID_RPMSG, VIRTIO_DEV_ANY_ID },
 > 952		{ VIRTIO_ID_ADSP, VIRTIO_DEV_ANY_ID },
   953		{ 0 },
   954	};
   955	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all at lists.01.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/gzip
Size: 73036 bytes
Desc: not available
URL:
<http://lists.linuxfoundation.org/pipermail/virtualization/attachments/20200516/32cba855/attachment-0001.gz>

Guennadi Liakhovetski

2020-May-25 13:53 UTC

head link

[Sound-open-firmware] [PATCH 5/6] vhost: add an rpmsg API

Hi Pierre,

On Sat, May 16, 2020 at 12:00:35PM -0500, Pierre-Louis Bossart
wrote:> 
> > +config VHOST_RPMSG
> > +	tristate
> > +	depends on VHOST
> 
> depends on RPMSG_VIRTIO?
No, RPMSG_VIRTIO is used on the guest side, VHOST_RPMSG (as well as 
all other vhost drivers) on the host side.
> > +	default n
> 
> not needed
Ok, will remove.

Thanks
Guennadi

Guennadi Liakhovetski

2020-May-26 18:55 UTC

head link

[Sound-open-firmware] [PATCH 5/6] vhost: add an rpmsg API

Hi Pierre,

On Tue, May 26, 2020 at 01:30:24PM -0500, Pierre-Louis Bossart
wrote:> 
> 
> On 5/25/20 8:53 AM, Guennadi Liakhovetski wrote:
> > Hi Pierre,
> > 
> > On Sat, May 16, 2020 at 12:00:35PM -0500, Pierre-Louis Bossart wrote:
> > > 
> > > > +config VHOST_RPMSG
> > > > +	tristate
> > > > +	depends on VHOST
> > > 
> > > depends on RPMSG_VIRTIO?
> > 
> > No, RPMSG_VIRTIO is used on the guest side, VHOST_RPMSG (as well as
> > all other vhost drivers) on the host side.
> 
> I vaguely recalled something about sockets, and was wondering if there
isn't
> a dependency on this:
> 
> config VHOST_VSOCK
> 	tristate "vhost virtio-vsock driver"
> 	depends on VSOCKETS && EVENTFD && VHOST_DPN
> 	select VHOST
You probably are thinking about the first patch in the series "vhost:
convert
VHOST_VSOCK_SET_RUNNING to a generic ioctl." But no, this RPMsg driver 
doesn't depend on vsock, on the contrary, it takes a (albeit tiny) piece of 
functionality from vsock and makes it global.

Thanks
Guennadi

Apparently Analagous Threads

Search for more seemingly similar threads

Linux Virtualization - May 2020 - [Sound-open-firmware] [PATCH 5/6] vhost: add an rpmsg API

[PATCH 0/6] Add a vhost RPMsg API

[PATCH 1/6] vhost: convert VHOST_VSOCK_SET_RUNNING to a generic ioctl

[PATCH 2/6] vhost: (cosmetic) remove a superfluous variable initialisation

[PATCH 3/6] rpmsg: move common structures and defines to headers

[PATCH 4/6] rpmsg: update documentation

[PATCH 5/6] vhost: add an rpmsg API

[PATCH 6/6] rpmsg: add a device ID to also bind to the ADSP device

[PATCH 6/6] rpmsg: add a device ID to also bind to the ADSP device

[Sound-open-firmware] [PATCH 5/6] vhost: add an rpmsg API

[Sound-open-firmware] [PATCH 5/6] vhost: add an rpmsg API

Apparently Analagous Threads