Michael S. Tsirkin
2020-Apr-01 14:13 UTC
[PATCH V9 1/9] vhost: refine vhost and vringh kconfig
On Wed, Apr 01, 2020 at 10:08:59PM +0800, Jason Wang wrote:> > On 2020/4/1 ??9:22, Michael S. Tsirkin wrote: > > On Thu, Mar 26, 2020 at 10:01:17PM +0800, Jason Wang wrote: > > > Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is > > > not necessarily for VM since it's a generic userspace and kernel > > > communication protocol. Such dependency may prevent archs without > > > virtualization support from using vhost. > > > > > > To solve this, a dedicated vhost menu is created under drivers so > > > CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION. > > > > > > While at it, also squash Kconfig.vringh into vhost Kconfig file. This > > > avoids the trick of conditional inclusion from VOP or CAIF. Then it > > > will be easier to introduce new vringh users and common dependency for > > > both vringh and vhost. > > > > > > Signed-off-by: Jason Wang <jasowang at redhat.com> > > Is this just so we can drop the dependency on CONFIG_VIRTUALIZATION? > > If yes what happens if we drop this patch? > > > The problem is that then VHOST_RING must depend on CONFIG_VIRTUALIZATION > (which enable VHOST_IOTLB) to work. > > But it looks to me CAIF and VOP doesn't requires CONFIG_VIRTUALIZATION.How about stubs for IOTLB so VHOST_RING does not depend on VHOST_IOTLB? I'm pretty sure neither user of vringh can actually use IOTLB, it's a software only thing.> > > Given the impact it had I'd like to defer it till next release if > > possible. > > > > > > > --- > > > arch/arm/kvm/Kconfig | 2 -- > > > arch/arm64/kvm/Kconfig | 2 -- > > > arch/mips/kvm/Kconfig | 2 -- > > > arch/powerpc/kvm/Kconfig | 2 -- > > > arch/s390/kvm/Kconfig | 4 ---- > > > arch/x86/kvm/Kconfig | 4 ---- > > > drivers/Kconfig | 2 ++ > > > drivers/misc/mic/Kconfig | 4 ---- > > > drivers/net/caif/Kconfig | 4 ---- > > > drivers/vhost/Kconfig | 23 ++++++++++++++--------- > > > drivers/vhost/Kconfig.vringh | 6 ------ > > > 11 files changed, 16 insertions(+), 39 deletions(-) > > > delete mode 100644 drivers/vhost/Kconfig.vringh > > > > > > diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig > > > index f591026347a5..be97393761bf 100644 > > > --- a/arch/arm/kvm/Kconfig > > > +++ b/arch/arm/kvm/Kconfig > > > @@ -54,6 +54,4 @@ config KVM_ARM_HOST > > > ---help--- > > > Provides host support for ARM processors. > > > -source "drivers/vhost/Kconfig" > > > - > > > endif # VIRTUALIZATION > > > diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig > > > index a475c68cbfec..449386d76441 100644 > > > --- a/arch/arm64/kvm/Kconfig > > > +++ b/arch/arm64/kvm/Kconfig > > > @@ -64,6 +64,4 @@ config KVM_ARM_PMU > > > config KVM_INDIRECT_VECTORS > > > def_bool KVM && (HARDEN_BRANCH_PREDICTOR || HARDEN_EL2_VECTORS) > > > -source "drivers/vhost/Kconfig" > > > - > > > endif # VIRTUALIZATION > > > diff --git a/arch/mips/kvm/Kconfig b/arch/mips/kvm/Kconfig > > > index eac25aef21e0..b91d145aa2d5 100644 > > > --- a/arch/mips/kvm/Kconfig > > > +++ b/arch/mips/kvm/Kconfig > > > @@ -72,6 +72,4 @@ config KVM_MIPS_DEBUG_COP0_COUNTERS > > > If unsure, say N. > > > -source "drivers/vhost/Kconfig" > > > - > > > endif # VIRTUALIZATION > > > diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig > > > index 711fca9bc6f0..12885eda324e 100644 > > > --- a/arch/powerpc/kvm/Kconfig > > > +++ b/arch/powerpc/kvm/Kconfig > > > @@ -204,6 +204,4 @@ config KVM_XIVE > > > default y > > > depends on KVM_XICS && PPC_XIVE_NATIVE && KVM_BOOK3S_HV_POSSIBLE > > > -source "drivers/vhost/Kconfig" > > > - > > > endif # VIRTUALIZATION > > > diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig > > > index d3db3d7ed077..def3b60f1fe8 100644 > > > --- a/arch/s390/kvm/Kconfig > > > +++ b/arch/s390/kvm/Kconfig > > > @@ -55,8 +55,4 @@ config KVM_S390_UCONTROL > > > If unsure, say N. > > > -# OK, it's a little counter-intuitive to do this, but it puts it neatly under > > > -# the virtualization menu. > > > -source "drivers/vhost/Kconfig" > > > - > > > endif # VIRTUALIZATION > > > diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig > > > index 991019d5eee1..0dfe70e17af9 100644 > > > --- a/arch/x86/kvm/Kconfig > > > +++ b/arch/x86/kvm/Kconfig > > > @@ -94,8 +94,4 @@ config KVM_MMU_AUDIT > > > This option adds a R/W kVM module parameter 'mmu_audit', which allows > > > auditing of KVM MMU events at runtime. > > > -# OK, it's a little counter-intuitive to do this, but it puts it neatly under > > > -# the virtualization menu. > > > -source "drivers/vhost/Kconfig" > > > - > > > endif # VIRTUALIZATION > > > diff --git a/drivers/Kconfig b/drivers/Kconfig > > > index 8befa53f43be..7a6d8b2b68b4 100644 > > > --- a/drivers/Kconfig > > > +++ b/drivers/Kconfig > > > @@ -138,6 +138,8 @@ source "drivers/virt/Kconfig" > > > source "drivers/virtio/Kconfig" > > > +source "drivers/vhost/Kconfig" > > > + > > > source "drivers/hv/Kconfig" > > > source "drivers/xen/Kconfig" > > > diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig > > > index b6841ba6d922..8f201d019f5a 100644 > > > --- a/drivers/misc/mic/Kconfig > > > +++ b/drivers/misc/mic/Kconfig > > > @@ -133,8 +133,4 @@ config VOP > > > OS and tools for MIC to use with this driver are available from > > > <http://software.intel.com/en-us/mic-developer>. > > > -if VOP > > > -source "drivers/vhost/Kconfig.vringh" > > > -endif > > > - > > > endmenu > > > diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig > > > index e74e2bb61236..9db0570c5beb 100644 > > > --- a/drivers/net/caif/Kconfig > > > +++ b/drivers/net/caif/Kconfig > > > @@ -58,8 +58,4 @@ config CAIF_VIRTIO > > > ---help--- > > > The CAIF driver for CAIF over Virtio. > > > -if CAIF_VIRTIO > > > -source "drivers/vhost/Kconfig.vringh" > > > -endif > > > - > > > endif # CAIF_DRIVERS > > > diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig > > > index 3d03ccbd1adc..4aef10a54cd1 100644 > > > --- a/drivers/vhost/Kconfig > > > +++ b/drivers/vhost/Kconfig > > > @@ -1,8 +1,20 @@ > > > # SPDX-License-Identifier: GPL-2.0-only > > > +config VHOST_RING > > > + tristate > > > + help > > > + This option is selected by any driver which needs to access > > > + the host side of a virtio ring. > > > + > > > +menuconfig VHOST > > > + tristate "Host kernel accelerator for virtio (VHOST)" > > > + help > > > + This option is selected by any driver which needs to access > > > + the core of vhost. > > > +if VHOST > > > + > > The description here is wrong, isn't it? > > VHOST and VHOST_RING are no longer selected, right? > > > For VHOST not currently.Can we just bring it back and select it?> For VHOST_RING, it was selected by CAIF, VOP and VDPASIM. > > Thanks > > > > > > > > > config VHOST_NET > > > tristate "Host kernel accelerator for virtio net" > > > depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP) > > > - select VHOST > > > ---help--- > > > This kernel module can be loaded in host kernel to accelerate > > > guest networking with virtio_net. Not to be confused with virtio_net > > > @@ -14,7 +26,6 @@ config VHOST_NET > > > config VHOST_SCSI > > > tristate "VHOST_SCSI TCM fabric driver" > > > depends on TARGET_CORE && EVENTFD > > > - select VHOST > > > default n > > > ---help--- > > > Say M here to enable the vhost_scsi TCM fabric module > > > @@ -24,7 +35,6 @@ config VHOST_VSOCK > > > tristate "vhost virtio-vsock driver" > > > depends on VSOCKETS && EVENTFD > > > select VIRTIO_VSOCKETS_COMMON > > > - select VHOST > > > default n > > > ---help--- > > > This kernel module can be loaded in the host kernel to provide AF_VSOCK > > > @@ -34,12 +44,6 @@ config VHOST_VSOCK > > > To compile this driver as a module, choose M here: the module will be called > > > vhost_vsock. > > > -config VHOST > > > - tristate > > > - ---help--- > > > - This option is selected by any driver which needs to access > > > - the core of vhost. > > > - > > > config VHOST_CROSS_ENDIAN_LEGACY > > > bool "Cross-endian support for vhost" > > > default n > > > @@ -54,3 +58,4 @@ config VHOST_CROSS_ENDIAN_LEGACY > > > adds some overhead, it is disabled by default. > > > If unsure, say "N". > > > +endif > > > diff --git a/drivers/vhost/Kconfig.vringh b/drivers/vhost/Kconfig.vringh > > > deleted file mode 100644 > > > index c1fe36a9b8d4..000000000000 > > > --- a/drivers/vhost/Kconfig.vringh > > > +++ /dev/null > > > @@ -1,6 +0,0 @@ > > > -# SPDX-License-Identifier: GPL-2.0-only > > > -config VHOST_RING > > > - tristate > > > - ---help--- > > > - This option is selected by any driver which needs to access > > > - the host side of a virtio ring. > > > -- > > > 2.20.1
On 2020/4/1 ??10:13, Michael S. Tsirkin wrote:> On Wed, Apr 01, 2020 at 10:08:59PM +0800, Jason Wang wrote: >> On 2020/4/1 ??9:22, Michael S. Tsirkin wrote: >>> On Thu, Mar 26, 2020 at 10:01:17PM +0800, Jason Wang wrote: >>>> Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is >>>> not necessarily for VM since it's a generic userspace and kernel >>>> communication protocol. Such dependency may prevent archs without >>>> virtualization support from using vhost. >>>> >>>> To solve this, a dedicated vhost menu is created under drivers so >>>> CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION. >>>> >>>> While at it, also squash Kconfig.vringh into vhost Kconfig file. This >>>> avoids the trick of conditional inclusion from VOP or CAIF. Then it >>>> will be easier to introduce new vringh users and common dependency for >>>> both vringh and vhost. >>>> >>>> Signed-off-by: Jason Wang <jasowang at redhat.com> >>> Is this just so we can drop the dependency on CONFIG_VIRTUALIZATION? >>> If yes what happens if we drop this patch? >> >> The problem is that then VHOST_RING must depend on CONFIG_VIRTUALIZATION >> (which enable VHOST_IOTLB) to work. >> >> But it looks to me CAIF and VOP doesn't requires CONFIG_VIRTUALIZATION. > How about stubs for IOTLB so VHOST_RING does not depend on VHOST_IOTLB?That could work.> I'm pretty sure neither user of vringh can actually use IOTLB, it's a > software only thing.Right.> >>> Given the impact it had I'd like to defer it till next release if >>> possible. >>> >>> >>>> --- >>>> arch/arm/kvm/Kconfig | 2 -- >>>> arch/arm64/kvm/Kconfig | 2 -- >>>> arch/mips/kvm/Kconfig | 2 -- >>>> arch/powerpc/kvm/Kconfig | 2 -- >>>> arch/s390/kvm/Kconfig | 4 ---- >>>> arch/x86/kvm/Kconfig | 4 ---- >>>> drivers/Kconfig | 2 ++ >>>> drivers/misc/mic/Kconfig | 4 ---- >>>> drivers/net/caif/Kconfig | 4 ---- >>>> drivers/vhost/Kconfig | 23 ++++++++++++++--------- >>>> drivers/vhost/Kconfig.vringh | 6 ------ >>>> 11 files changed, 16 insertions(+), 39 deletions(-) >>>> delete mode 100644 drivers/vhost/Kconfig.vringh >>>> >>>> diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig >>>> index f591026347a5..be97393761bf 100644 >>>> --- a/arch/arm/kvm/Kconfig >>>> +++ b/arch/arm/kvm/Kconfig >>>> @@ -54,6 +54,4 @@ config KVM_ARM_HOST >>>> ---help--- >>>> Provides host support for ARM processors. >>>> -source "drivers/vhost/Kconfig" >>>> - >>>> endif # VIRTUALIZATION >>>> diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig >>>> index a475c68cbfec..449386d76441 100644 >>>> --- a/arch/arm64/kvm/Kconfig >>>> +++ b/arch/arm64/kvm/Kconfig >>>> @@ -64,6 +64,4 @@ config KVM_ARM_PMU >>>> config KVM_INDIRECT_VECTORS >>>> def_bool KVM && (HARDEN_BRANCH_PREDICTOR || HARDEN_EL2_VECTORS) >>>> -source "drivers/vhost/Kconfig" >>>> - >>>> endif # VIRTUALIZATION >>>> diff --git a/arch/mips/kvm/Kconfig b/arch/mips/kvm/Kconfig >>>> index eac25aef21e0..b91d145aa2d5 100644 >>>> --- a/arch/mips/kvm/Kconfig >>>> +++ b/arch/mips/kvm/Kconfig >>>> @@ -72,6 +72,4 @@ config KVM_MIPS_DEBUG_COP0_COUNTERS >>>> If unsure, say N. >>>> -source "drivers/vhost/Kconfig" >>>> - >>>> endif # VIRTUALIZATION >>>> diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig >>>> index 711fca9bc6f0..12885eda324e 100644 >>>> --- a/arch/powerpc/kvm/Kconfig >>>> +++ b/arch/powerpc/kvm/Kconfig >>>> @@ -204,6 +204,4 @@ config KVM_XIVE >>>> default y >>>> depends on KVM_XICS && PPC_XIVE_NATIVE && KVM_BOOK3S_HV_POSSIBLE >>>> -source "drivers/vhost/Kconfig" >>>> - >>>> endif # VIRTUALIZATION >>>> diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig >>>> index d3db3d7ed077..def3b60f1fe8 100644 >>>> --- a/arch/s390/kvm/Kconfig >>>> +++ b/arch/s390/kvm/Kconfig >>>> @@ -55,8 +55,4 @@ config KVM_S390_UCONTROL >>>> If unsure, say N. >>>> -# OK, it's a little counter-intuitive to do this, but it puts it neatly under >>>> -# the virtualization menu. >>>> -source "drivers/vhost/Kconfig" >>>> - >>>> endif # VIRTUALIZATION >>>> diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig >>>> index 991019d5eee1..0dfe70e17af9 100644 >>>> --- a/arch/x86/kvm/Kconfig >>>> +++ b/arch/x86/kvm/Kconfig >>>> @@ -94,8 +94,4 @@ config KVM_MMU_AUDIT >>>> This option adds a R/W kVM module parameter 'mmu_audit', which allows >>>> auditing of KVM MMU events at runtime. >>>> -# OK, it's a little counter-intuitive to do this, but it puts it neatly under >>>> -# the virtualization menu. >>>> -source "drivers/vhost/Kconfig" >>>> - >>>> endif # VIRTUALIZATION >>>> diff --git a/drivers/Kconfig b/drivers/Kconfig >>>> index 8befa53f43be..7a6d8b2b68b4 100644 >>>> --- a/drivers/Kconfig >>>> +++ b/drivers/Kconfig >>>> @@ -138,6 +138,8 @@ source "drivers/virt/Kconfig" >>>> source "drivers/virtio/Kconfig" >>>> +source "drivers/vhost/Kconfig" >>>> + >>>> source "drivers/hv/Kconfig" >>>> source "drivers/xen/Kconfig" >>>> diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig >>>> index b6841ba6d922..8f201d019f5a 100644 >>>> --- a/drivers/misc/mic/Kconfig >>>> +++ b/drivers/misc/mic/Kconfig >>>> @@ -133,8 +133,4 @@ config VOP >>>> OS and tools for MIC to use with this driver are available from >>>> <http://software.intel.com/en-us/mic-developer>. >>>> -if VOP >>>> -source "drivers/vhost/Kconfig.vringh" >>>> -endif >>>> - >>>> endmenu >>>> diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig >>>> index e74e2bb61236..9db0570c5beb 100644 >>>> --- a/drivers/net/caif/Kconfig >>>> +++ b/drivers/net/caif/Kconfig >>>> @@ -58,8 +58,4 @@ config CAIF_VIRTIO >>>> ---help--- >>>> The CAIF driver for CAIF over Virtio. >>>> -if CAIF_VIRTIO >>>> -source "drivers/vhost/Kconfig.vringh" >>>> -endif >>>> - >>>> endif # CAIF_DRIVERS >>>> diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig >>>> index 3d03ccbd1adc..4aef10a54cd1 100644 >>>> --- a/drivers/vhost/Kconfig >>>> +++ b/drivers/vhost/Kconfig >>>> @@ -1,8 +1,20 @@ >>>> # SPDX-License-Identifier: GPL-2.0-only >>>> +config VHOST_RING >>>> + tristate >>>> + help >>>> + This option is selected by any driver which needs to access >>>> + the host side of a virtio ring. >>>> + >>>> +menuconfig VHOST >>>> + tristate "Host kernel accelerator for virtio (VHOST)" >>>> + help >>>> + This option is selected by any driver which needs to access >>>> + the core of vhost. >>>> +if VHOST >>>> + >>> The description here is wrong, isn't it? >>> VHOST and VHOST_RING are no longer selected, right? >> >> For VHOST not currently. > Can we just bring it back and select it?Right, so if bring it back, we don't even need the stub. How about something like attached? Thanks> >> For VHOST_RING, it was selected by CAIF, VOP and VDPASIM. >> >> Thanks >> >> >>> >>>> config VHOST_NET >>>> tristate "Host kernel accelerator for virtio net" >>>> depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP) >>>> - select VHOST >>>> ---help--- >>>> This kernel module can be loaded in host kernel to accelerate >>>> guest networking with virtio_net. Not to be confused with virtio_net >>>> @@ -14,7 +26,6 @@ config VHOST_NET >>>> config VHOST_SCSI >>>> tristate "VHOST_SCSI TCM fabric driver" >>>> depends on TARGET_CORE && EVENTFD >>>> - select VHOST >>>> default n >>>> ---help--- >>>> Say M here to enable the vhost_scsi TCM fabric module >>>> @@ -24,7 +35,6 @@ config VHOST_VSOCK >>>> tristate "vhost virtio-vsock driver" >>>> depends on VSOCKETS && EVENTFD >>>> select VIRTIO_VSOCKETS_COMMON >>>> - select VHOST >>>> default n >>>> ---help--- >>>> This kernel module can be loaded in the host kernel to provide AF_VSOCK >>>> @@ -34,12 +44,6 @@ config VHOST_VSOCK >>>> To compile this driver as a module, choose M here: the module will be called >>>> vhost_vsock. >>>> -config VHOST >>>> - tristate >>>> - ---help--- >>>> - This option is selected by any driver which needs to access >>>> - the core of vhost. >>>> - >>>> config VHOST_CROSS_ENDIAN_LEGACY >>>> bool "Cross-endian support for vhost" >>>> default n >>>> @@ -54,3 +58,4 @@ config VHOST_CROSS_ENDIAN_LEGACY >>>> adds some overhead, it is disabled by default. >>>> If unsure, say "N". >>>> +endif >>>> diff --git a/drivers/vhost/Kconfig.vringh b/drivers/vhost/Kconfig.vringh >>>> deleted file mode 100644 >>>> index c1fe36a9b8d4..000000000000 >>>> --- a/drivers/vhost/Kconfig.vringh >>>> +++ /dev/null >>>> @@ -1,6 +0,0 @@ >>>> -# SPDX-License-Identifier: GPL-2.0-only >>>> -config VHOST_RING >>>> - tristate >>>> - ---help--- >>>> - This option is selected by any driver which needs to access >>>> - the host side of a virtio ring. >>>> -- >>>> 2.20.1-------------- next part -------------- A non-text attachment was scrubbed... Name: 0001-vhost-let-CONFIG_VHOST-to-be-selected-by-drivers.patch Type: text/x-patch Size: 2231 bytes Desc: not available URL: <http://lists.linuxfoundation.org/pipermail/virtualization/attachments/20200401/5350ae09/attachment.bin>
Michael S. Tsirkin
2020-Apr-01 14:35 UTC
[PATCH V9 1/9] vhost: refine vhost and vringh kconfig
On Wed, Apr 01, 2020 at 10:29:32PM +0800, Jason Wang wrote:> > On 2020/4/1 ??10:13, Michael S. Tsirkin wrote: > > On Wed, Apr 01, 2020 at 10:08:59PM +0800, Jason Wang wrote: > > > On 2020/4/1 ??9:22, Michael S. Tsirkin wrote: > > > > On Thu, Mar 26, 2020 at 10:01:17PM +0800, Jason Wang wrote: > > > > > Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is > > > > > not necessarily for VM since it's a generic userspace and kernel > > > > > communication protocol. Such dependency may prevent archs without > > > > > virtualization support from using vhost. > > > > > > > > > > To solve this, a dedicated vhost menu is created under drivers so > > > > > CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION. > > > > > > > > > > While at it, also squash Kconfig.vringh into vhost Kconfig file. This > > > > > avoids the trick of conditional inclusion from VOP or CAIF. Then it > > > > > will be easier to introduce new vringh users and common dependency for > > > > > both vringh and vhost. > > > > > > > > > > Signed-off-by: Jason Wang <jasowang at redhat.com> > > > > Is this just so we can drop the dependency on CONFIG_VIRTUALIZATION? > > > > If yes what happens if we drop this patch? > > > > > > The problem is that then VHOST_RING must depend on CONFIG_VIRTUALIZATION > > > (which enable VHOST_IOTLB) to work. > > > > > > But it looks to me CAIF and VOP doesn't requires CONFIG_VIRTUALIZATION. > > How about stubs for IOTLB so VHOST_RING does not depend on VHOST_IOTLB? > > > That could work. > > > > I'm pretty sure neither user of vringh can actually use IOTLB, it's a > > software only thing. > > > Right. > > > > > > > > Given the impact it had I'd like to defer it till next release if > > > > possible. > > > > > > > > > > > > > --- > > > > > arch/arm/kvm/Kconfig | 2 -- > > > > > arch/arm64/kvm/Kconfig | 2 -- > > > > > arch/mips/kvm/Kconfig | 2 -- > > > > > arch/powerpc/kvm/Kconfig | 2 -- > > > > > arch/s390/kvm/Kconfig | 4 ---- > > > > > arch/x86/kvm/Kconfig | 4 ---- > > > > > drivers/Kconfig | 2 ++ > > > > > drivers/misc/mic/Kconfig | 4 ---- > > > > > drivers/net/caif/Kconfig | 4 ---- > > > > > drivers/vhost/Kconfig | 23 ++++++++++++++--------- > > > > > drivers/vhost/Kconfig.vringh | 6 ------ > > > > > 11 files changed, 16 insertions(+), 39 deletions(-) > > > > > delete mode 100644 drivers/vhost/Kconfig.vringh > > > > > > > > > > diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig > > > > > index f591026347a5..be97393761bf 100644 > > > > > --- a/arch/arm/kvm/Kconfig > > > > > +++ b/arch/arm/kvm/Kconfig > > > > > @@ -54,6 +54,4 @@ config KVM_ARM_HOST > > > > > ---help--- > > > > > Provides host support for ARM processors. > > > > > -source "drivers/vhost/Kconfig" > > > > > - > > > > > endif # VIRTUALIZATION > > > > > diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig > > > > > index a475c68cbfec..449386d76441 100644 > > > > > --- a/arch/arm64/kvm/Kconfig > > > > > +++ b/arch/arm64/kvm/Kconfig > > > > > @@ -64,6 +64,4 @@ config KVM_ARM_PMU > > > > > config KVM_INDIRECT_VECTORS > > > > > def_bool KVM && (HARDEN_BRANCH_PREDICTOR || HARDEN_EL2_VECTORS) > > > > > -source "drivers/vhost/Kconfig" > > > > > - > > > > > endif # VIRTUALIZATION > > > > > diff --git a/arch/mips/kvm/Kconfig b/arch/mips/kvm/Kconfig > > > > > index eac25aef21e0..b91d145aa2d5 100644 > > > > > --- a/arch/mips/kvm/Kconfig > > > > > +++ b/arch/mips/kvm/Kconfig > > > > > @@ -72,6 +72,4 @@ config KVM_MIPS_DEBUG_COP0_COUNTERS > > > > > If unsure, say N. > > > > > -source "drivers/vhost/Kconfig" > > > > > - > > > > > endif # VIRTUALIZATION > > > > > diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig > > > > > index 711fca9bc6f0..12885eda324e 100644 > > > > > --- a/arch/powerpc/kvm/Kconfig > > > > > +++ b/arch/powerpc/kvm/Kconfig > > > > > @@ -204,6 +204,4 @@ config KVM_XIVE > > > > > default y > > > > > depends on KVM_XICS && PPC_XIVE_NATIVE && KVM_BOOK3S_HV_POSSIBLE > > > > > -source "drivers/vhost/Kconfig" > > > > > - > > > > > endif # VIRTUALIZATION > > > > > diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig > > > > > index d3db3d7ed077..def3b60f1fe8 100644 > > > > > --- a/arch/s390/kvm/Kconfig > > > > > +++ b/arch/s390/kvm/Kconfig > > > > > @@ -55,8 +55,4 @@ config KVM_S390_UCONTROL > > > > > If unsure, say N. > > > > > -# OK, it's a little counter-intuitive to do this, but it puts it neatly under > > > > > -# the virtualization menu. > > > > > -source "drivers/vhost/Kconfig" > > > > > - > > > > > endif # VIRTUALIZATION > > > > > diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig > > > > > index 991019d5eee1..0dfe70e17af9 100644 > > > > > --- a/arch/x86/kvm/Kconfig > > > > > +++ b/arch/x86/kvm/Kconfig > > > > > @@ -94,8 +94,4 @@ config KVM_MMU_AUDIT > > > > > This option adds a R/W kVM module parameter 'mmu_audit', which allows > > > > > auditing of KVM MMU events at runtime. > > > > > -# OK, it's a little counter-intuitive to do this, but it puts it neatly under > > > > > -# the virtualization menu. > > > > > -source "drivers/vhost/Kconfig" > > > > > - > > > > > endif # VIRTUALIZATION > > > > > diff --git a/drivers/Kconfig b/drivers/Kconfig > > > > > index 8befa53f43be..7a6d8b2b68b4 100644 > > > > > --- a/drivers/Kconfig > > > > > +++ b/drivers/Kconfig > > > > > @@ -138,6 +138,8 @@ source "drivers/virt/Kconfig" > > > > > source "drivers/virtio/Kconfig" > > > > > +source "drivers/vhost/Kconfig" > > > > > + > > > > > source "drivers/hv/Kconfig" > > > > > source "drivers/xen/Kconfig" > > > > > diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig > > > > > index b6841ba6d922..8f201d019f5a 100644 > > > > > --- a/drivers/misc/mic/Kconfig > > > > > +++ b/drivers/misc/mic/Kconfig > > > > > @@ -133,8 +133,4 @@ config VOP > > > > > OS and tools for MIC to use with this driver are available from > > > > > <http://software.intel.com/en-us/mic-developer>. > > > > > -if VOP > > > > > -source "drivers/vhost/Kconfig.vringh" > > > > > -endif > > > > > - > > > > > endmenu > > > > > diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig > > > > > index e74e2bb61236..9db0570c5beb 100644 > > > > > --- a/drivers/net/caif/Kconfig > > > > > +++ b/drivers/net/caif/Kconfig > > > > > @@ -58,8 +58,4 @@ config CAIF_VIRTIO > > > > > ---help--- > > > > > The CAIF driver for CAIF over Virtio. > > > > > -if CAIF_VIRTIO > > > > > -source "drivers/vhost/Kconfig.vringh" > > > > > -endif > > > > > - > > > > > endif # CAIF_DRIVERS > > > > > diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig > > > > > index 3d03ccbd1adc..4aef10a54cd1 100644 > > > > > --- a/drivers/vhost/Kconfig > > > > > +++ b/drivers/vhost/Kconfig > > > > > @@ -1,8 +1,20 @@ > > > > > # SPDX-License-Identifier: GPL-2.0-only > > > > > +config VHOST_RING > > > > > + tristate > > > > > + help > > > > > + This option is selected by any driver which needs to access > > > > > + the host side of a virtio ring. > > > > > + > > > > > +menuconfig VHOST > > > > > + tristate "Host kernel accelerator for virtio (VHOST)" > > > > > + help > > > > > + This option is selected by any driver which needs to access > > > > > + the core of vhost. > > > > > +if VHOST > > > > > + > > > > The description here is wrong, isn't it? > > > > VHOST and VHOST_RING are no longer selected, right? > > > > > > For VHOST not currently. > > Can we just bring it back and select it? > > > Right, so if bring it back, we don't even need the stub. > > How about something like attached? > > Thanks > > > > > > For VHOST_RING, it was selected by CAIF, VOP and VDPASIM. > > > > > > Thanks > > > > > > > > > > > > > > > config VHOST_NET > > > > > tristate "Host kernel accelerator for virtio net" > > > > > depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP) > > > > > - select VHOST > > > > > ---help--- > > > > > This kernel module can be loaded in host kernel to accelerate > > > > > guest networking with virtio_net. Not to be confused with virtio_net > > > > > @@ -14,7 +26,6 @@ config VHOST_NET > > > > > config VHOST_SCSI > > > > > tristate "VHOST_SCSI TCM fabric driver" > > > > > depends on TARGET_CORE && EVENTFD > > > > > - select VHOST > > > > > default n > > > > > ---help--- > > > > > Say M here to enable the vhost_scsi TCM fabric module > > > > > @@ -24,7 +35,6 @@ config VHOST_VSOCK > > > > > tristate "vhost virtio-vsock driver" > > > > > depends on VSOCKETS && EVENTFD > > > > > select VIRTIO_VSOCKETS_COMMON > > > > > - select VHOST > > > > > default n > > > > > ---help--- > > > > > This kernel module can be loaded in the host kernel to provide AF_VSOCK > > > > > @@ -34,12 +44,6 @@ config VHOST_VSOCK > > > > > To compile this driver as a module, choose M here: the module will be called > > > > > vhost_vsock. > > > > > -config VHOST > > > > > - tristate > > > > > - ---help--- > > > > > - This option is selected by any driver which needs to access > > > > > - the core of vhost. > > > > > - > > > > > config VHOST_CROSS_ENDIAN_LEGACY > > > > > bool "Cross-endian support for vhost" > > > > > default n > > > > > @@ -54,3 +58,4 @@ config VHOST_CROSS_ENDIAN_LEGACY > > > > > adds some overhead, it is disabled by default. > > > > > If unsure, say "N". > > > > > +endif > > > > > diff --git a/drivers/vhost/Kconfig.vringh b/drivers/vhost/Kconfig.vringh > > > > > deleted file mode 100644 > > > > > index c1fe36a9b8d4..000000000000 > > > > > --- a/drivers/vhost/Kconfig.vringh > > > > > +++ /dev/null > > > > > @@ -1,6 +0,0 @@ > > > > > -# SPDX-License-Identifier: GPL-2.0-only > > > > > -config VHOST_RING > > > > > - tristate > > > > > - ---help--- > > > > > - This option is selected by any driver which needs to access > > > > > - the host side of a virtio ring. > > > > > -- > > > > > 2.20.1> >From 9b3a5d23b8bf6b0a11e65e688335d782f8e6aa5c Mon Sep 17 00:00:00 2001 > From: Jason Wang <jasowang at redhat.com> > Date: Wed, 1 Apr 2020 22:17:27 +0800 > Subject: [PATCH] vhost: let CONFIG_VHOST to be selected by drivers > > The defconfig on some archs enable vhost_net or vhost_vsock by > default. So instead of adding CONFIG_VHOST=m to all of those files, > simply letting CONFIG_VHOST to be selected by all of the vhost > drivers. This fixes the build on the archs with CONFIG_VHOST_NET=m in > their defconfig. > > Signed-off-by: Jason Wang <jasowang at redhat.com> > --- > drivers/vhost/Kconfig | 15 +++++++++++---- > 1 file changed, 11 insertions(+), 4 deletions(-) > > diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig > index 2523a1d4290a..362b832f5338 100644 > --- a/drivers/vhost/Kconfig > +++ b/drivers/vhost/Kconfig > @@ -11,19 +11,23 @@ config VHOST_RING > This option is selected by any driver which needs to access > the host side of a virtio ring. > > -menuconfig VHOST > - tristate "Host kernel accelerator for virtio (VHOST)" > - depends on EVENTFD > +config VHOST > + tristate > select VHOST_IOTLB > help > This option is selected by any driver which needs to access > the core of vhost. > > -if VHOST > +menuconfig VHOST_MENU > + bool "VHOST drivers" > + default y > + > +if VHOST_MENUWill this not still have the problem with defconfigs? They don't set VHOST_MENU ...> > config VHOST_NET > tristate "Host kernel accelerator for virtio net" > depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP) > + select VHOST > ---help--- > This kernel module can be loaded in host kernel to accelerate > guest networking with virtio_net. Not to be confused with virtio_net > @@ -35,6 +39,7 @@ config VHOST_NET > config VHOST_SCSI > tristate "VHOST_SCSI TCM fabric driver" > depends on TARGET_CORE && EVENTFD > + select VHOST > default n > ---help--- > Say M here to enable the vhost_scsi TCM fabric module > @@ -43,6 +48,7 @@ config VHOST_SCSI > config VHOST_VSOCK > tristate "vhost virtio-vsock driver" > depends on VSOCKETS && EVENTFD > + select VHOST > select VIRTIO_VSOCKETS_COMMON > default n > ---help--- > @@ -56,6 +62,7 @@ config VHOST_VSOCK > config VHOST_VDPA > tristate "Vhost driver for vDPA-based backend" > depends on EVENTFD > + select VHOST > select VDPA > help > This kernel module can be loaded in host kernel to accelerate > -- > 2.20.1 >
Michael S. Tsirkin
2020-Apr-01 14:39 UTC
[PATCH V9 1/9] vhost: refine vhost and vringh kconfig
On Wed, Apr 01, 2020 at 10:29:32PM +0800, Jason Wang wrote:> > On 2020/4/1 ??10:13, Michael S. Tsirkin wrote: > > On Wed, Apr 01, 2020 at 10:08:59PM +0800, Jason Wang wrote: > > > On 2020/4/1 ??9:22, Michael S. Tsirkin wrote: > > > > On Thu, Mar 26, 2020 at 10:01:17PM +0800, Jason Wang wrote: > > > > > Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is > > > > > not necessarily for VM since it's a generic userspace and kernel > > > > > communication protocol. Such dependency may prevent archs without > > > > > virtualization support from using vhost. > > > > > > > > > > To solve this, a dedicated vhost menu is created under drivers so > > > > > CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION. > > > > > > > > > > While at it, also squash Kconfig.vringh into vhost Kconfig file. This > > > > > avoids the trick of conditional inclusion from VOP or CAIF. Then it > > > > > will be easier to introduce new vringh users and common dependency for > > > > > both vringh and vhost. > > > > > > > > > > Signed-off-by: Jason Wang <jasowang at redhat.com> > > > > Is this just so we can drop the dependency on CONFIG_VIRTUALIZATION? > > > > If yes what happens if we drop this patch? > > > > > > The problem is that then VHOST_RING must depend on CONFIG_VIRTUALIZATION > > > (which enable VHOST_IOTLB) to work. > > > > > > But it looks to me CAIF and VOP doesn't requires CONFIG_VIRTUALIZATION. > > How about stubs for IOTLB so VHOST_RING does not depend on VHOST_IOTLB? > > > That could work. > > > > I'm pretty sure neither user of vringh can actually use IOTLB, it's a > > software only thing. > > > Right. > > > > > > > > Given the impact it had I'd like to defer it till next release if > > > > possible. > > > > > > > > > > > > > --- > > > > > arch/arm/kvm/Kconfig | 2 -- > > > > > arch/arm64/kvm/Kconfig | 2 -- > > > > > arch/mips/kvm/Kconfig | 2 -- > > > > > arch/powerpc/kvm/Kconfig | 2 -- > > > > > arch/s390/kvm/Kconfig | 4 ---- > > > > > arch/x86/kvm/Kconfig | 4 ---- > > > > > drivers/Kconfig | 2 ++ > > > > > drivers/misc/mic/Kconfig | 4 ---- > > > > > drivers/net/caif/Kconfig | 4 ---- > > > > > drivers/vhost/Kconfig | 23 ++++++++++++++--------- > > > > > drivers/vhost/Kconfig.vringh | 6 ------ > > > > > 11 files changed, 16 insertions(+), 39 deletions(-) > > > > > delete mode 100644 drivers/vhost/Kconfig.vringh > > > > > > > > > > diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig > > > > > index f591026347a5..be97393761bf 100644 > > > > > --- a/arch/arm/kvm/Kconfig > > > > > +++ b/arch/arm/kvm/Kconfig > > > > > @@ -54,6 +54,4 @@ config KVM_ARM_HOST > > > > > ---help--- > > > > > Provides host support for ARM processors. > > > > > -source "drivers/vhost/Kconfig" > > > > > - > > > > > endif # VIRTUALIZATION > > > > > diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig > > > > > index a475c68cbfec..449386d76441 100644 > > > > > --- a/arch/arm64/kvm/Kconfig > > > > > +++ b/arch/arm64/kvm/Kconfig > > > > > @@ -64,6 +64,4 @@ config KVM_ARM_PMU > > > > > config KVM_INDIRECT_VECTORS > > > > > def_bool KVM && (HARDEN_BRANCH_PREDICTOR || HARDEN_EL2_VECTORS) > > > > > -source "drivers/vhost/Kconfig" > > > > > - > > > > > endif # VIRTUALIZATION > > > > > diff --git a/arch/mips/kvm/Kconfig b/arch/mips/kvm/Kconfig > > > > > index eac25aef21e0..b91d145aa2d5 100644 > > > > > --- a/arch/mips/kvm/Kconfig > > > > > +++ b/arch/mips/kvm/Kconfig > > > > > @@ -72,6 +72,4 @@ config KVM_MIPS_DEBUG_COP0_COUNTERS > > > > > If unsure, say N. > > > > > -source "drivers/vhost/Kconfig" > > > > > - > > > > > endif # VIRTUALIZATION > > > > > diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig > > > > > index 711fca9bc6f0..12885eda324e 100644 > > > > > --- a/arch/powerpc/kvm/Kconfig > > > > > +++ b/arch/powerpc/kvm/Kconfig > > > > > @@ -204,6 +204,4 @@ config KVM_XIVE > > > > > default y > > > > > depends on KVM_XICS && PPC_XIVE_NATIVE && KVM_BOOK3S_HV_POSSIBLE > > > > > -source "drivers/vhost/Kconfig" > > > > > - > > > > > endif # VIRTUALIZATION > > > > > diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig > > > > > index d3db3d7ed077..def3b60f1fe8 100644 > > > > > --- a/arch/s390/kvm/Kconfig > > > > > +++ b/arch/s390/kvm/Kconfig > > > > > @@ -55,8 +55,4 @@ config KVM_S390_UCONTROL > > > > > If unsure, say N. > > > > > -# OK, it's a little counter-intuitive to do this, but it puts it neatly under > > > > > -# the virtualization menu. > > > > > -source "drivers/vhost/Kconfig" > > > > > - > > > > > endif # VIRTUALIZATION > > > > > diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig > > > > > index 991019d5eee1..0dfe70e17af9 100644 > > > > > --- a/arch/x86/kvm/Kconfig > > > > > +++ b/arch/x86/kvm/Kconfig > > > > > @@ -94,8 +94,4 @@ config KVM_MMU_AUDIT > > > > > This option adds a R/W kVM module parameter 'mmu_audit', which allows > > > > > auditing of KVM MMU events at runtime. > > > > > -# OK, it's a little counter-intuitive to do this, but it puts it neatly under > > > > > -# the virtualization menu. > > > > > -source "drivers/vhost/Kconfig" > > > > > - > > > > > endif # VIRTUALIZATION > > > > > diff --git a/drivers/Kconfig b/drivers/Kconfig > > > > > index 8befa53f43be..7a6d8b2b68b4 100644 > > > > > --- a/drivers/Kconfig > > > > > +++ b/drivers/Kconfig > > > > > @@ -138,6 +138,8 @@ source "drivers/virt/Kconfig" > > > > > source "drivers/virtio/Kconfig" > > > > > +source "drivers/vhost/Kconfig" > > > > > + > > > > > source "drivers/hv/Kconfig" > > > > > source "drivers/xen/Kconfig" > > > > > diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig > > > > > index b6841ba6d922..8f201d019f5a 100644 > > > > > --- a/drivers/misc/mic/Kconfig > > > > > +++ b/drivers/misc/mic/Kconfig > > > > > @@ -133,8 +133,4 @@ config VOP > > > > > OS and tools for MIC to use with this driver are available from > > > > > <http://software.intel.com/en-us/mic-developer>. > > > > > -if VOP > > > > > -source "drivers/vhost/Kconfig.vringh" > > > > > -endif > > > > > - > > > > > endmenu > > > > > diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig > > > > > index e74e2bb61236..9db0570c5beb 100644 > > > > > --- a/drivers/net/caif/Kconfig > > > > > +++ b/drivers/net/caif/Kconfig > > > > > @@ -58,8 +58,4 @@ config CAIF_VIRTIO > > > > > ---help--- > > > > > The CAIF driver for CAIF over Virtio. > > > > > -if CAIF_VIRTIO > > > > > -source "drivers/vhost/Kconfig.vringh" > > > > > -endif > > > > > - > > > > > endif # CAIF_DRIVERS > > > > > diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig > > > > > index 3d03ccbd1adc..4aef10a54cd1 100644 > > > > > --- a/drivers/vhost/Kconfig > > > > > +++ b/drivers/vhost/Kconfig > > > > > @@ -1,8 +1,20 @@ > > > > > # SPDX-License-Identifier: GPL-2.0-only > > > > > +config VHOST_RING > > > > > + tristate > > > > > + help > > > > > + This option is selected by any driver which needs to access > > > > > + the host side of a virtio ring. > > > > > + > > > > > +menuconfig VHOST > > > > > + tristate "Host kernel accelerator for virtio (VHOST)" > > > > > + help > > > > > + This option is selected by any driver which needs to access > > > > > + the core of vhost. > > > > > +if VHOST > > > > > + > > > > The description here is wrong, isn't it? > > > > VHOST and VHOST_RING are no longer selected, right? > > > > > > For VHOST not currently. > > Can we just bring it back and select it? > > > Right, so if bring it back, we don't even need the stub. > > How about something like attached? > > Thanks > > > > > > > For VHOST_RING, it was selected by CAIF, VOP and VDPASIM. > > > > > > Thanks > > > > > > > > > > > > > > > config VHOST_NET > > > > > tristate "Host kernel accelerator for virtio net" > > > > > depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP) > > > > > - select VHOST > > > > > ---help--- > > > > > This kernel module can be loaded in host kernel to accelerate > > > > > guest networking with virtio_net. Not to be confused with virtio_net > > > > > @@ -14,7 +26,6 @@ config VHOST_NET > > > > > config VHOST_SCSI > > > > > tristate "VHOST_SCSI TCM fabric driver" > > > > > depends on TARGET_CORE && EVENTFD > > > > > - select VHOST > > > > > default n > > > > > ---help--- > > > > > Say M here to enable the vhost_scsi TCM fabric module > > > > > @@ -24,7 +35,6 @@ config VHOST_VSOCK > > > > > tristate "vhost virtio-vsock driver" > > > > > depends on VSOCKETS && EVENTFD > > > > > select VIRTIO_VSOCKETS_COMMON > > > > > - select VHOST > > > > > default n > > > > > ---help--- > > > > > This kernel module can be loaded in the host kernel to provide AF_VSOCK > > > > > @@ -34,12 +44,6 @@ config VHOST_VSOCK > > > > > To compile this driver as a module, choose M here: the module will be called > > > > > vhost_vsock. > > > > > -config VHOST > > > > > - tristate > > > > > - ---help--- > > > > > - This option is selected by any driver which needs to access > > > > > - the core of vhost. > > > > > - > > > > > config VHOST_CROSS_ENDIAN_LEGACY > > > > > bool "Cross-endian support for vhost" > > > > > default n > > > > > @@ -54,3 +58,4 @@ config VHOST_CROSS_ENDIAN_LEGACY > > > > > adds some overhead, it is disabled by default. > > > > > If unsure, say "N". > > > > > +endif > > > > > diff --git a/drivers/vhost/Kconfig.vringh b/drivers/vhost/Kconfig.vringh > > > > > deleted file mode 100644 > > > > > index c1fe36a9b8d4..000000000000 > > > > > --- a/drivers/vhost/Kconfig.vringh > > > > > +++ /dev/null > > > > > @@ -1,6 +0,0 @@ > > > > > -# SPDX-License-Identifier: GPL-2.0-only > > > > > -config VHOST_RING > > > > > - tristate > > > > > - ---help--- > > > > > - This option is selected by any driver which needs to access > > > > > - the host side of a virtio ring. > > > > > -- > > > > > 2.20.1> >From 9b3a5d23b8bf6b0a11e65e688335d782f8e6aa5c Mon Sep 17 00:00:00 2001 > From: Jason Wang <jasowang at redhat.com> > Date: Wed, 1 Apr 2020 22:17:27 +0800 > Subject: [PATCH] vhost: let CONFIG_VHOST to be selected by drivers > > The defconfig on some archs enable vhost_net or vhost_vsock by > default. So instead of adding CONFIG_VHOST=m to all of those files, > simply letting CONFIG_VHOST to be selected by all of the vhost > drivers. This fixes the build on the archs with CONFIG_VHOST_NET=m in > their defconfig. > > Signed-off-by: Jason Wang <jasowang at redhat.com> > --- > drivers/vhost/Kconfig | 15 +++++++++++---- > 1 file changed, 11 insertions(+), 4 deletions(-) > > diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig > index 2523a1d4290a..362b832f5338 100644 > --- a/drivers/vhost/Kconfig > +++ b/drivers/vhost/Kconfig > @@ -11,19 +11,23 @@ config VHOST_RING > This option is selected by any driver which needs to access > the host side of a virtio ring. > > -menuconfig VHOST > - tristate "Host kernel accelerator for virtio (VHOST)" > - depends on EVENTFD > +config VHOST > + tristate > select VHOST_IOTLB > help > This option is selected by any driver which needs to access > the core of vhost. > > -if VHOST > +menuconfig VHOST_MENU > + bool "VHOST drivers" > + default y > + > +if VHOST_MENUIn fact this is similar to VIRTIO, and I wonder whether VIRTIO has also been broken by commit 7b95fec6d2ffa53f4a8d637b0f223644d458ea4e Author: Vincent Legoll <vincent.legoll at gmail.com> Date: Sun Jan 7 12:33:56 2018 +0100 virtio: make VIRTIO a menuconfig to ease disabling it all I see lots of defconfigs set VIRTIO_PCI but not VIRTIO_MENU ... -- MST
Michael S. Tsirkin
2020-Apr-01 16:05 UTC
[PATCH V9 1/9] vhost: refine vhost and vringh kconfig
On Wed, Apr 01, 2020 at 10:29:32PM +0800, Jason Wang wrote:> >From 9b3a5d23b8bf6b0a11e65e688335d782f8e6aa5c Mon Sep 17 00:00:00 2001 > From: Jason Wang <jasowang at redhat.com> > Date: Wed, 1 Apr 2020 22:17:27 +0800 > Subject: [PATCH] vhost: let CONFIG_VHOST to be selected by drivers > > The defconfig on some archs enable vhost_net or vhost_vsock by > default. So instead of adding CONFIG_VHOST=m to all of those files, > simply letting CONFIG_VHOST to be selected by all of the vhost > drivers. This fixes the build on the archs with CONFIG_VHOST_NET=m in > their defconfig. > > Signed-off-by: Jason Wang <jasowang at redhat.com> > --- > drivers/vhost/Kconfig | 15 +++++++++++---- > 1 file changed, 11 insertions(+), 4 deletions(-) > > diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig > index 2523a1d4290a..362b832f5338 100644 > --- a/drivers/vhost/Kconfig > +++ b/drivers/vhost/Kconfig > @@ -11,19 +11,23 @@ config VHOST_RING > This option is selected by any driver which needs to access > the host side of a virtio ring. > > -menuconfig VHOST > - tristate "Host kernel accelerator for virtio (VHOST)" > - depends on EVENTFD > +config VHOST > + tristate > select VHOST_IOTLB > help > This option is selected by any driver which needs to access > the core of vhost.OK so don't we need the dependency on EVENTFD though? I recall there was a bug this was supposed to fix ...> -if VHOST > +menuconfig VHOST_MENU > + bool "VHOST drivers" > + default y > + > +if VHOST_MENU > > config VHOST_NET > tristate "Host kernel accelerator for virtio net" > depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP) > + select VHOST > ---help--- > This kernel module can be loaded in host kernel to accelerate > guest networking with virtio_net. Not to be confused with virtio_net > @@ -35,6 +39,7 @@ config VHOST_NET > config VHOST_SCSI > tristate "VHOST_SCSI TCM fabric driver" > depends on TARGET_CORE && EVENTFD > + select VHOST > default n > ---help--- > Say M here to enable the vhost_scsi TCM fabric module > @@ -43,6 +48,7 @@ config VHOST_SCSI > config VHOST_VSOCK > tristate "vhost virtio-vsock driver" > depends on VSOCKETS && EVENTFD > + select VHOST > select VIRTIO_VSOCKETS_COMMON > default n > ---help--- > @@ -56,6 +62,7 @@ config VHOST_VSOCK > config VHOST_VDPA > tristate "Vhost driver for vDPA-based backend" > depends on EVENTFD > + select VHOST > select VDPA > help > This kernel module can be loaded in host kernel to accelerate > -- > 2.20.1 >
Michael S. Tsirkin
2020-Apr-01 16:08 UTC
[PATCH V9 1/9] vhost: refine vhost and vringh kconfig
On Wed, Apr 01, 2020 at 10:29:32PM +0800, Jason Wang wrote:> >From 9b3a5d23b8bf6b0a11e65e688335d782f8e6aa5c Mon Sep 17 00:00:00 2001 > From: Jason Wang <jasowang at redhat.com> > Date: Wed, 1 Apr 2020 22:17:27 +0800 > Subject: [PATCH] vhost: let CONFIG_VHOST to be selected by drivers > > The defconfig on some archs enable vhost_net or vhost_vsock by > default. So instead of adding CONFIG_VHOST=m to all of those files, > simply letting CONFIG_VHOST to be selected by all of the vhost > drivers. This fixes the build on the archs with CONFIG_VHOST_NET=m in > their defconfig. > > Signed-off-by: Jason Wang <jasowang at redhat.com> > --- > drivers/vhost/Kconfig | 15 +++++++++++---- > 1 file changed, 11 insertions(+), 4 deletions(-) > > diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig > index 2523a1d4290a..362b832f5338 100644 > --- a/drivers/vhost/Kconfig > +++ b/drivers/vhost/Kconfig > @@ -11,19 +11,23 @@ config VHOST_RING > This option is selected by any driver which needs to access > the host side of a virtio ring. > > -menuconfig VHOST > - tristate "Host kernel accelerator for virtio (VHOST)" > - depends on EVENTFD > +config VHOST > + tristate > select VHOST_IOTLB > help > This option is selected by any driver which needs to access > the core of vhost. > > -if VHOST > +menuconfig VHOST_MENU > + bool "VHOST drivers" > + default y > + > +if VHOST_MENU > > config VHOST_NET > tristate "Host kernel accelerator for virtio net" > depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP) > + select VHOST > ---help--- > This kernel module can be loaded in host kernel to accelerate > guest networking with virtio_net. Not to be confused with virtio_net > @@ -35,6 +39,7 @@ config VHOST_NET > config VHOST_SCSI > tristate "VHOST_SCSI TCM fabric driver" > depends on TARGET_CORE && EVENTFD > + select VHOST > default n > ---help--- > Say M here to enable the vhost_scsi TCM fabric module > @@ -43,6 +48,7 @@ config VHOST_SCSI > config VHOST_VSOCK > tristate "vhost virtio-vsock driver" > depends on VSOCKETS && EVENTFD > + select VHOST > select VIRTIO_VSOCKETS_COMMON > default n > ---help--- > @@ -56,6 +62,7 @@ config VHOST_VSOCK > config VHOST_VDPA > tristate "Vhost driver for vDPA-based backend" > depends on EVENTFD > + select VHOST > select VDPA > help > This kernel module can be loaded in host kernel to accelerateOK so I squashed this into the original buggy patch. Could you please play with vhost branch of my tree on various arches? If it looks ok to you let me know I'll push this to next. -- MST
Apparently Analagous Threads
- [PATCH V9 1/9] vhost: refine vhost and vringh kconfig
- [PATCH V9 1/9] vhost: refine vhost and vringh kconfig
- [PATCH V9 1/9] vhost: refine vhost and vringh kconfig
- [PATCH V9 1/9] vhost: refine vhost and vringh kconfig
- [PATCH V9 1/9] vhost: refine vhost and vringh kconfig