On 2020/4/1 ??9:02, Christian Borntraeger wrote:> > On 01.04.20 14:56, Christian Borntraeger wrote: >> On 01.04.20 14:50, Jason Wang wrote: >>> On 2020/4/1 ??7:21, Christian Borntraeger wrote: >>>> On 26.03.20 15:01, Jason Wang wrote: >>>>> Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is >>>>> not necessarily for VM since it's a generic userspace and kernel >>>>> communication protocol. Such dependency may prevent archs without >>>>> virtualization support from using vhost. >>>>> >>>>> To solve this, a dedicated vhost menu is created under drivers so >>>>> CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION. >>>> FWIW, this now results in vhost not being build with defconfig kernels (in todays >>>> linux-next). >>>> >>> Hi Christian: >>> >>> Did you meet it even with this commit?https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=a4be40cbcedba9b5b714f3c95182e8a45176e42d? >> I simply used linux-next. The defconfig does NOT contain CONFIG_VHOST and therefore CONFIG_VHOST_NET and friends >> can not be selected. >> >> $ git checkout next-20200401 >> $ make defconfig >> HOSTCC scripts/basic/fixdep >> HOSTCC scripts/kconfig/conf.o >> HOSTCC scripts/kconfig/confdata.o >> HOSTCC scripts/kconfig/expr.o >> LEX scripts/kconfig/lexer.lex.c >> YACC scripts/kconfig/parser.tab.[ch] >> HOSTCC scripts/kconfig/lexer.lex.o >> HOSTCC scripts/kconfig/parser.tab.o >> HOSTCC scripts/kconfig/preprocess.o >> HOSTCC scripts/kconfig/symbol.o >> HOSTCC scripts/kconfig/util.o >> HOSTLD scripts/kconfig/conf >> *** Default configuration is based on 'x86_64_defconfig' >> # >> # configuration written to .config >> # >> >> $ grep VHOST .config >> # CONFIG_VHOST is not set >> >> >>> If yes, what's your build config looks like? >>> >>> Thanks > This was x86. Not sure if that did work before. > On s390 this is definitely a regression as the defconfig files > for s390 do select VHOST_NET > > grep VHOST arch/s390/configs/* > arch/s390/configs/debug_defconfig:CONFIG_VHOST_NET=m > arch/s390/configs/debug_defconfig:CONFIG_VHOST_VSOCK=m > arch/s390/configs/defconfig:CONFIG_VHOST_NET=m > arch/s390/configs/defconfig:CONFIG_VHOST_VSOCK=m > > and this worked with 5.6, but does not work with next. Just adding > CONFIG_VHOST=m to the defconfig solves the issue, something likeRight, I think we probably need 1) add CONFIG_VHOST=m to all defconfigs that enables CONFIG_VHOST_NET/VSOCK/SCSI. or 2) don't use menuconfig for CONFIG_VHOST, let NET/SCSI/VDPA just select it. Thanks> > --- > arch/s390/configs/debug_defconfig | 5 +++-- > arch/s390/configs/defconfig | 5 +++-- > 2 files changed, 6 insertions(+), 4 deletions(-) > > diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig > index 46038bc58c9e..0b83274341ce 100644 > --- a/arch/s390/configs/debug_defconfig > +++ b/arch/s390/configs/debug_defconfig > @@ -57,8 +57,6 @@ CONFIG_PROTECTED_VIRTUALIZATION_GUEST=y > CONFIG_CMM=m > CONFIG_APPLDATA_BASE=y > CONFIG_KVM=m > -CONFIG_VHOST_NET=m > -CONFIG_VHOST_VSOCK=m > CONFIG_OPROFILE=m > CONFIG_KPROBES=y > CONFIG_JUMP_LABEL=y > @@ -561,6 +559,9 @@ CONFIG_VFIO_MDEV_DEVICE=m > CONFIG_VIRTIO_PCI=m > CONFIG_VIRTIO_BALLOON=m > CONFIG_VIRTIO_INPUT=y > +CONFIG_VHOST=m > +CONFIG_VHOST_NET=m > +CONFIG_VHOST_VSOCK=m > CONFIG_S390_CCW_IOMMU=y > CONFIG_S390_AP_IOMMU=y > CONFIG_EXT4_FS=y > diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig > index 7cd0648c1f4e..39e69c4e8cf7 100644 > --- a/arch/s390/configs/defconfig > +++ b/arch/s390/configs/defconfig > @@ -57,8 +57,6 @@ CONFIG_PROTECTED_VIRTUALIZATION_GUEST=y > CONFIG_CMM=m > CONFIG_APPLDATA_BASE=y > CONFIG_KVM=m > -CONFIG_VHOST_NET=m > -CONFIG_VHOST_VSOCK=m > CONFIG_OPROFILE=m > CONFIG_KPROBES=y > CONFIG_JUMP_LABEL=y > @@ -557,6 +555,9 @@ CONFIG_VFIO_MDEV_DEVICE=m > CONFIG_VIRTIO_PCI=m > CONFIG_VIRTIO_BALLOON=m > CONFIG_VIRTIO_INPUT=y > +CONFIG_VHOST=m > +CONFIG_VHOST_NET=m > +CONFIG_VHOST_VSOCK=m > CONFIG_S390_CCW_IOMMU=y > CONFIG_S390_AP_IOMMU=y > CONFIG_EXT4_FS=y
Michael S. Tsirkin
2020-Apr-01 14:18 UTC
[PATCH V9 1/9] vhost: refine vhost and vringh kconfig
On Wed, Apr 01, 2020 at 10:13:29PM +0800, Jason Wang wrote:> > On 2020/4/1 ??9:02, Christian Borntraeger wrote: > > > > On 01.04.20 14:56, Christian Borntraeger wrote: > > > On 01.04.20 14:50, Jason Wang wrote: > > > > On 2020/4/1 ??7:21, Christian Borntraeger wrote: > > > > > On 26.03.20 15:01, Jason Wang wrote: > > > > > > Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is > > > > > > not necessarily for VM since it's a generic userspace and kernel > > > > > > communication protocol. Such dependency may prevent archs without > > > > > > virtualization support from using vhost. > > > > > > > > > > > > To solve this, a dedicated vhost menu is created under drivers so > > > > > > CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION. > > > > > FWIW, this now results in vhost not being build with defconfig kernels (in todays > > > > > linux-next). > > > > > > > > > Hi Christian: > > > > > > > > Did you meet it even with this commit?https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=a4be40cbcedba9b5b714f3c95182e8a45176e42d? > > > I simply used linux-next. The defconfig does NOT contain CONFIG_VHOST and therefore CONFIG_VHOST_NET and friends > > > can not be selected. > > > > > > $ git checkout next-20200401 > > > $ make defconfig > > > HOSTCC scripts/basic/fixdep > > > HOSTCC scripts/kconfig/conf.o > > > HOSTCC scripts/kconfig/confdata.o > > > HOSTCC scripts/kconfig/expr.o > > > LEX scripts/kconfig/lexer.lex.c > > > YACC scripts/kconfig/parser.tab.[ch] > > > HOSTCC scripts/kconfig/lexer.lex.o > > > HOSTCC scripts/kconfig/parser.tab.o > > > HOSTCC scripts/kconfig/preprocess.o > > > HOSTCC scripts/kconfig/symbol.o > > > HOSTCC scripts/kconfig/util.o > > > HOSTLD scripts/kconfig/conf > > > *** Default configuration is based on 'x86_64_defconfig' > > > # > > > # configuration written to .config > > > # > > > > > > $ grep VHOST .config > > > # CONFIG_VHOST is not set > > > > > > > If yes, what's your build config looks like? > > > > > > > > Thanks > > This was x86. Not sure if that did work before. > > On s390 this is definitely a regression as the defconfig files > > for s390 do select VHOST_NET > > > > grep VHOST arch/s390/configs/* > > arch/s390/configs/debug_defconfig:CONFIG_VHOST_NET=m > > arch/s390/configs/debug_defconfig:CONFIG_VHOST_VSOCK=m > > arch/s390/configs/defconfig:CONFIG_VHOST_NET=m > > arch/s390/configs/defconfig:CONFIG_VHOST_VSOCK=m > > > > and this worked with 5.6, but does not work with next. Just adding > > CONFIG_VHOST=m to the defconfig solves the issue, something like > > > Right, I think we probably need > > 1) add CONFIG_VHOST=m to all defconfigs that enables > CONFIG_VHOST_NET/VSOCK/SCSI. > > or > > 2) don't use menuconfig for CONFIG_VHOST, let NET/SCSI/VDPA just select it. > > ThanksI think I prefer 2, but does it auto-select VHOST_IOTLB then? Generally what was the reason to drop select VHOST from devices?> > > > > --- > > arch/s390/configs/debug_defconfig | 5 +++-- > > arch/s390/configs/defconfig | 5 +++-- > > 2 files changed, 6 insertions(+), 4 deletions(-) > > > > diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig > > index 46038bc58c9e..0b83274341ce 100644 > > --- a/arch/s390/configs/debug_defconfig > > +++ b/arch/s390/configs/debug_defconfig > > @@ -57,8 +57,6 @@ CONFIG_PROTECTED_VIRTUALIZATION_GUEST=y > > CONFIG_CMM=m > > CONFIG_APPLDATA_BASE=y > > CONFIG_KVM=m > > -CONFIG_VHOST_NET=m > > -CONFIG_VHOST_VSOCK=m > > CONFIG_OPROFILE=m > > CONFIG_KPROBES=y > > CONFIG_JUMP_LABEL=y > > @@ -561,6 +559,9 @@ CONFIG_VFIO_MDEV_DEVICE=m > > CONFIG_VIRTIO_PCI=m > > CONFIG_VIRTIO_BALLOON=m > > CONFIG_VIRTIO_INPUT=y > > +CONFIG_VHOST=m > > +CONFIG_VHOST_NET=m > > +CONFIG_VHOST_VSOCK=m > > CONFIG_S390_CCW_IOMMU=y > > CONFIG_S390_AP_IOMMU=y > > CONFIG_EXT4_FS=y > > diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig > > index 7cd0648c1f4e..39e69c4e8cf7 100644 > > --- a/arch/s390/configs/defconfig > > +++ b/arch/s390/configs/defconfig > > @@ -57,8 +57,6 @@ CONFIG_PROTECTED_VIRTUALIZATION_GUEST=y > > CONFIG_CMM=m > > CONFIG_APPLDATA_BASE=y > > CONFIG_KVM=m > > -CONFIG_VHOST_NET=m > > -CONFIG_VHOST_VSOCK=m > > CONFIG_OPROFILE=m > > CONFIG_KPROBES=y > > CONFIG_JUMP_LABEL=y > > @@ -557,6 +555,9 @@ CONFIG_VFIO_MDEV_DEVICE=m > > CONFIG_VIRTIO_PCI=m > > CONFIG_VIRTIO_BALLOON=m > > CONFIG_VIRTIO_INPUT=y > > +CONFIG_VHOST=m > > +CONFIG_VHOST_NET=m > > +CONFIG_VHOST_VSOCK=m > > CONFIG_S390_CCW_IOMMU=y > > CONFIG_S390_AP_IOMMU=y > > CONFIG_EXT4_FS=y
Michael S. Tsirkin
2020-Apr-01 14:27 UTC
[PATCH V9 1/9] vhost: refine vhost and vringh kconfig
On Wed, Apr 01, 2020 at 10:13:29PM +0800, Jason Wang wrote:> > On 2020/4/1 ??9:02, Christian Borntraeger wrote: > > > > On 01.04.20 14:56, Christian Borntraeger wrote: > > > On 01.04.20 14:50, Jason Wang wrote: > > > > On 2020/4/1 ??7:21, Christian Borntraeger wrote: > > > > > On 26.03.20 15:01, Jason Wang wrote: > > > > > > Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is > > > > > > not necessarily for VM since it's a generic userspace and kernel > > > > > > communication protocol. Such dependency may prevent archs without > > > > > > virtualization support from using vhost. > > > > > > > > > > > > To solve this, a dedicated vhost menu is created under drivers so > > > > > > CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION. > > > > > FWIW, this now results in vhost not being build with defconfig kernels (in todays > > > > > linux-next). > > > > > > > > > Hi Christian: > > > > > > > > Did you meet it even with this commit?https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=a4be40cbcedba9b5b714f3c95182e8a45176e42d? > > > I simply used linux-next. The defconfig does NOT contain CONFIG_VHOST and therefore CONFIG_VHOST_NET and friends > > > can not be selected. > > > > > > $ git checkout next-20200401 > > > $ make defconfig > > > HOSTCC scripts/basic/fixdep > > > HOSTCC scripts/kconfig/conf.o > > > HOSTCC scripts/kconfig/confdata.o > > > HOSTCC scripts/kconfig/expr.o > > > LEX scripts/kconfig/lexer.lex.c > > > YACC scripts/kconfig/parser.tab.[ch] > > > HOSTCC scripts/kconfig/lexer.lex.o > > > HOSTCC scripts/kconfig/parser.tab.o > > > HOSTCC scripts/kconfig/preprocess.o > > > HOSTCC scripts/kconfig/symbol.o > > > HOSTCC scripts/kconfig/util.o > > > HOSTLD scripts/kconfig/conf > > > *** Default configuration is based on 'x86_64_defconfig' > > > # > > > # configuration written to .config > > > # > > > > > > $ grep VHOST .config > > > # CONFIG_VHOST is not set > > > > > > > If yes, what's your build config looks like? > > > > > > > > Thanks > > This was x86. Not sure if that did work before. > > On s390 this is definitely a regression as the defconfig files > > for s390 do select VHOST_NET > > > > grep VHOST arch/s390/configs/* > > arch/s390/configs/debug_defconfig:CONFIG_VHOST_NET=m > > arch/s390/configs/debug_defconfig:CONFIG_VHOST_VSOCK=m > > arch/s390/configs/defconfig:CONFIG_VHOST_NET=m > > arch/s390/configs/defconfig:CONFIG_VHOST_VSOCK=m > > > > and this worked with 5.6, but does not work with next. Just adding > > CONFIG_VHOST=m to the defconfig solves the issue, something like > > > Right, I think we probably need > > 1) add CONFIG_VHOST=m to all defconfigs that enables > CONFIG_VHOST_NET/VSOCK/SCSI. > > or > > 2) don't use menuconfig for CONFIG_VHOST, let NET/SCSI/VDPA just select it. > > ThanksOK I tried this: diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig index 2523a1d4290a..a314b900d479 100644 --- a/drivers/vhost/Kconfig +++ b/drivers/vhost/Kconfig @@ -19,11 +19,10 @@ menuconfig VHOST This option is selected by any driver which needs to access the core of vhost. -if VHOST - config VHOST_NET tristate "Host kernel accelerator for virtio net" depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP) + select VHOST ---help--- This kernel module can be loaded in host kernel to accelerate guest networking with virtio_net. Not to be confused with virtio_net @@ -35,6 +34,7 @@ config VHOST_NET config VHOST_SCSI tristate "VHOST_SCSI TCM fabric driver" depends on TARGET_CORE && EVENTFD + select VHOST default n ---help--- Say M here to enable the vhost_scsi TCM fabric module @@ -44,6 +44,7 @@ config VHOST_VSOCK tristate "vhost virtio-vsock driver" depends on VSOCKETS && EVENTFD select VIRTIO_VSOCKETS_COMMON + select VHOST default n ---help--- This kernel module can be loaded in the host kernel to provide AF_VSOCK @@ -57,6 +58,7 @@ config VHOST_VDPA tristate "Vhost driver for vDPA-based backend" depends on EVENTFD select VDPA + select VHOST help This kernel module can be loaded in host kernel to accelerate guest virtio devices with the vDPA-based backends. @@ -78,5 +80,3 @@ config VHOST_CROSS_ENDIAN_LEGACY adds some overhead, it is disabled by default. If unsure, say "N". - -endif But now CONFIG_VHOST is always "y", never "m". Which I think will make it a built-in. Didn't figure out why yet. -- MST
On 2020/4/1 ??10:18, Michael S. Tsirkin wrote:> On Wed, Apr 01, 2020 at 10:13:29PM +0800, Jason Wang wrote: >> On 2020/4/1 ??9:02, Christian Borntraeger wrote: >>> On 01.04.20 14:56, Christian Borntraeger wrote: >>>> On 01.04.20 14:50, Jason Wang wrote: >>>>> On 2020/4/1 ??7:21, Christian Borntraeger wrote: >>>>>> On 26.03.20 15:01, Jason Wang wrote: >>>>>>> Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is >>>>>>> not necessarily for VM since it's a generic userspace and kernel >>>>>>> communication protocol. Such dependency may prevent archs without >>>>>>> virtualization support from using vhost. >>>>>>> >>>>>>> To solve this, a dedicated vhost menu is created under drivers so >>>>>>> CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION. >>>>>> FWIW, this now results in vhost not being build with defconfig kernels (in todays >>>>>> linux-next). >>>>>> >>>>> Hi Christian: >>>>> >>>>> Did you meet it even with this commithttps://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=a4be40cbcedba9b5b714f3c95182e8a45176e42d? >>>> I simply used linux-next. The defconfig does NOT contain CONFIG_VHOST and therefore CONFIG_VHOST_NET and friends >>>> can not be selected. >>>> >>>> $ git checkout next-20200401 >>>> $ make defconfig >>>> HOSTCC scripts/basic/fixdep >>>> HOSTCC scripts/kconfig/conf.o >>>> HOSTCC scripts/kconfig/confdata.o >>>> HOSTCC scripts/kconfig/expr.o >>>> LEX scripts/kconfig/lexer.lex.c >>>> YACC scripts/kconfig/parser.tab.[ch] >>>> HOSTCC scripts/kconfig/lexer.lex.o >>>> HOSTCC scripts/kconfig/parser.tab.o >>>> HOSTCC scripts/kconfig/preprocess.o >>>> HOSTCC scripts/kconfig/symbol.o >>>> HOSTCC scripts/kconfig/util.o >>>> HOSTLD scripts/kconfig/conf >>>> *** Default configuration is based on 'x86_64_defconfig' >>>> # >>>> # configuration written to .config >>>> # >>>> >>>> $ grep VHOST .config >>>> # CONFIG_VHOST is not set >>>> >>>>> If yes, what's your build config looks like? >>>>> >>>>> Thanks >>> This was x86. Not sure if that did work before. >>> On s390 this is definitely a regression as the defconfig files >>> for s390 do select VHOST_NET >>> >>> grep VHOST arch/s390/configs/* >>> arch/s390/configs/debug_defconfig:CONFIG_VHOST_NET=m >>> arch/s390/configs/debug_defconfig:CONFIG_VHOST_VSOCK=m >>> arch/s390/configs/defconfig:CONFIG_VHOST_NET=m >>> arch/s390/configs/defconfig:CONFIG_VHOST_VSOCK=m >>> >>> and this worked with 5.6, but does not work with next. Just adding >>> CONFIG_VHOST=m to the defconfig solves the issue, something like >> Right, I think we probably need >> >> 1) add CONFIG_VHOST=m to all defconfigs that enables >> CONFIG_VHOST_NET/VSOCK/SCSI. >> >> or >> >> 2) don't use menuconfig for CONFIG_VHOST, let NET/SCSI/VDPA just select it. >> >> Thanks > I think I prefer 2, but does it auto-select VHOST_IOTLB then?I think so. E.g VHOST_NET will select VHOST,? and VHOST will select VHOST_IOTLB.> Generally what was the reason to drop select VHOST from devices? > >The reason is a sub menu is needed for VHOST devices, then I use menuconfig for CONFIG_VHOST. Then select is not necessary anymore. Thanks
On 2020/4/1 ??10:27, Michael S. Tsirkin wrote:> On Wed, Apr 01, 2020 at 10:13:29PM +0800, Jason Wang wrote: >> On 2020/4/1 ??9:02, Christian Borntraeger wrote: >>> On 01.04.20 14:56, Christian Borntraeger wrote: >>>> On 01.04.20 14:50, Jason Wang wrote: >>>>> On 2020/4/1 ??7:21, Christian Borntraeger wrote: >>>>>> On 26.03.20 15:01, Jason Wang wrote: >>>>>>> Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is >>>>>>> not necessarily for VM since it's a generic userspace and kernel >>>>>>> communication protocol. Such dependency may prevent archs without >>>>>>> virtualization support from using vhost. >>>>>>> >>>>>>> To solve this, a dedicated vhost menu is created under drivers so >>>>>>> CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION. >>>>>> FWIW, this now results in vhost not being build with defconfig kernels (in todays >>>>>> linux-next). >>>>>> >>>>> Hi Christian: >>>>> >>>>> Did you meet it even with this commit?https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=a4be40cbcedba9b5b714f3c95182e8a45176e42d? >>>> I simply used linux-next. The defconfig does NOT contain CONFIG_VHOST and therefore CONFIG_VHOST_NET and friends >>>> can not be selected. >>>> >>>> $ git checkout next-20200401 >>>> $ make defconfig >>>> HOSTCC scripts/basic/fixdep >>>> HOSTCC scripts/kconfig/conf.o >>>> HOSTCC scripts/kconfig/confdata.o >>>> HOSTCC scripts/kconfig/expr.o >>>> LEX scripts/kconfig/lexer.lex.c >>>> YACC scripts/kconfig/parser.tab.[ch] >>>> HOSTCC scripts/kconfig/lexer.lex.o >>>> HOSTCC scripts/kconfig/parser.tab.o >>>> HOSTCC scripts/kconfig/preprocess.o >>>> HOSTCC scripts/kconfig/symbol.o >>>> HOSTCC scripts/kconfig/util.o >>>> HOSTLD scripts/kconfig/conf >>>> *** Default configuration is based on 'x86_64_defconfig' >>>> # >>>> # configuration written to .config >>>> # >>>> >>>> $ grep VHOST .config >>>> # CONFIG_VHOST is not set >>>> >>>>> If yes, what's your build config looks like? >>>>> >>>>> Thanks >>> This was x86. Not sure if that did work before. >>> On s390 this is definitely a regression as the defconfig files >>> for s390 do select VHOST_NET >>> >>> grep VHOST arch/s390/configs/* >>> arch/s390/configs/debug_defconfig:CONFIG_VHOST_NET=m >>> arch/s390/configs/debug_defconfig:CONFIG_VHOST_VSOCK=m >>> arch/s390/configs/defconfig:CONFIG_VHOST_NET=m >>> arch/s390/configs/defconfig:CONFIG_VHOST_VSOCK=m >>> >>> and this worked with 5.6, but does not work with next. Just adding >>> CONFIG_VHOST=m to the defconfig solves the issue, something like >> >> Right, I think we probably need >> >> 1) add CONFIG_VHOST=m to all defconfigs that enables >> CONFIG_VHOST_NET/VSOCK/SCSI. >> >> or >> >> 2) don't use menuconfig for CONFIG_VHOST, let NET/SCSI/VDPA just select it. >> >> Thanks > OK I tried this: > > diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig > index 2523a1d4290a..a314b900d479 100644 > --- a/drivers/vhost/Kconfig > +++ b/drivers/vhost/Kconfig > @@ -19,11 +19,10 @@ menuconfig VHOST > This option is selected by any driver which needs to access > the core of vhost. > > -if VHOST > - > config VHOST_NET > tristate "Host kernel accelerator for virtio net" > depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP) > + select VHOST > ---help--- > This kernel module can be loaded in host kernel to accelerate > guest networking with virtio_net. Not to be confused with virtio_net > @@ -35,6 +34,7 @@ config VHOST_NET > config VHOST_SCSI > tristate "VHOST_SCSI TCM fabric driver" > depends on TARGET_CORE && EVENTFD > + select VHOST > default n > ---help--- > Say M here to enable the vhost_scsi TCM fabric module > @@ -44,6 +44,7 @@ config VHOST_VSOCK > tristate "vhost virtio-vsock driver" > depends on VSOCKETS && EVENTFD > select VIRTIO_VSOCKETS_COMMON > + select VHOST > default n > ---help--- > This kernel module can be loaded in the host kernel to provide AF_VSOCK > @@ -57,6 +58,7 @@ config VHOST_VDPA > tristate "Vhost driver for vDPA-based backend" > depends on EVENTFD > select VDPA > + select VHOST > help > This kernel module can be loaded in host kernel to accelerate > guest virtio devices with the vDPA-based backends. > @@ -78,5 +80,3 @@ config VHOST_CROSS_ENDIAN_LEGACY > adds some overhead, it is disabled by default. > > If unsure, say "N". > - > -endif > > > But now CONFIG_VHOST is always "y", never "m". > Which I think will make it a built-in. > Didn't figure out why yet.Is it because the dependency of EVENTFD for CONFIG_VHOST? Remove that one for this patch, I can get CONFIG_VHOST=m. But according to documentation/kbuild/kconfig.rst, select is used for option without prompt. Thanks>
Maybe Matching Threads
- [PATCH V9 1/9] vhost: refine vhost and vringh kconfig
- [PATCH V9 1/9] vhost: refine vhost and vringh kconfig
- [PATCH V9 1/9] vhost: refine vhost and vringh kconfig
- [PATCH V9 1/9] vhost: refine vhost and vringh kconfig
- [PATCH V9 1/9] vhost: refine vhost and vringh kconfig