On 04.02.20 09:40, Michael S. Tsirkin wrote:> On Tue, Feb 04, 2020 at 09:35:21AM +0100, David Hildenbrand wrote: >>>>> I would say reverting probably makes sense. I'm not sure there is much >>>>> value to having a shrinker running deflation when you are actively trying >>>>> to increase the balloon. It would make more sense to wait until you are >>>>> actually about to start hitting oom. >>>> >>>> I think the shrinker makes sense for free page hinting feature >>>> (everything on free_page_list). >>>> >>>> So instead of only reverting, I think we should split it up and always >>>> register the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT and the OOM >>>> notifier (as before) for VIRTIO_BALLOON_F_MUST_TELL_HOST. >> >> s/VIRTIO_BALLOON_F_MUST_TELL_HOST/VIRTIO_BALLOON_F_DEFLATE_ON_OOM/ >> >> :) > > Well VIRTIO_BALLOON_F_MUST_TELL_HOST is also broken by shrinker > with VIRTIO_BALLOON_F_FREE_PAGE_HINT as that code adds buffers > but does not wait for them to be used even with VIRTIO_BALLOON_F_MUST_TELL_HOST. > We never noticed because QEMU does not advertize > VIRTIO_BALLOON_F_MUST_TELL_HOST.So, I am trying to understand how the code is intended to work, but I am afraid I am missing something (or to rephrase: I think I found a BUG :) and there is lack of proper documentation about this feature). a) We allocate pages and add them to the list as long as we are told to do so. We send these pages to the host one by one. b) We free all pages once we get a STOP signal. Until then, we keep pages allocated. c) When called via the shrinker, we want to free pages from the list, even though the hypervisor did not notify us to do so. Issue 1: When we unload the balloon driver in the guest in an unlucky event, we won't free the pages. We are missing something like (if I am not wrong): diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index b1d2068fa2bd..e2b0925e1e83 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -929,6 +929,10 @@ static void remove_common(struct virtio_balloon *vb) leak_balloon(vb, vb->num_pages); update_balloon_size(vb); + /* There might be free pages that are being reported: release them. */ + if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT)) + return_free_pages_to_mm(vb, ULONG_MAX); + /* Now we reset the device so we can clean up the queues. */ vb->vdev->config->reset(vb->vdev); Issue 2: When called via the shrinker, (but also to fix Issue 1), it could be that we do have VIRTIO_BALLOON_F_MUST_TELL_HOST. I assume this means (-ENOCLUE) that we have to wait until the hypervisor notifies us via the STOP? Or for which event do we have to wait? Because there is no way to *tell host* here that we want to reuse a page. The hypervisor will *tell us* when we can reuse pages. For the shrinker it is simple: Don't use the shrinker with VIRTIO_BALLOON_F_MUST_TELL_HOST :) . But to fix Issue 1, we *would* have to wait until we get a STOP signal. That is not really possible because it might take an infinite amount of time. Michael, any clue on which event we have to wait with VIRTIO_BALLOON_F_MUST_TELL_HOST? IMHO, I don't think VIRTIO_BALLOON_F_MUST_TELL_HOST applies to VIRTIO_BALLOON_F_FREE_PAGE_HINT and we'd better document that. It introduces complexity with no clear benefit. -- Thanks, David / dhildenb
On Tue, Feb 04, 2020 at 03:30:19PM +0100, David Hildenbrand wrote:> On 04.02.20 09:40, Michael S. Tsirkin wrote: > > On Tue, Feb 04, 2020 at 09:35:21AM +0100, David Hildenbrand wrote: > >>>>> I would say reverting probably makes sense. I'm not sure there is much > >>>>> value to having a shrinker running deflation when you are actively trying > >>>>> to increase the balloon. It would make more sense to wait until you are > >>>>> actually about to start hitting oom. > >>>> > >>>> I think the shrinker makes sense for free page hinting feature > >>>> (everything on free_page_list). > >>>> > >>>> So instead of only reverting, I think we should split it up and always > >>>> register the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT and the OOM > >>>> notifier (as before) for VIRTIO_BALLOON_F_MUST_TELL_HOST. > >> > >> s/VIRTIO_BALLOON_F_MUST_TELL_HOST/VIRTIO_BALLOON_F_DEFLATE_ON_OOM/ > >> > >> :) > > > > Well VIRTIO_BALLOON_F_MUST_TELL_HOST is also broken by shrinker > > with VIRTIO_BALLOON_F_FREE_PAGE_HINT as that code adds buffers > > but does not wait for them to be used even with VIRTIO_BALLOON_F_MUST_TELL_HOST. > > We never noticed because QEMU does not advertize > > VIRTIO_BALLOON_F_MUST_TELL_HOST. > > So, I am trying to understand how the code is intended to work, but I > am afraid I am missing something (or to rephrase: I think I found a BUG :) and > there is lack of proper documentation about this feature). > > a) We allocate pages and add them to the list as long as we are told to do so. > We send these pages to the host one by one. > b) We free all pages once we get a STOP signal. Until then, we keep pages allocated. > c) When called via the shrinker, we want to free pages from the list, even > though the hypervisor did not notify us to do so. > > > Issue 1: When we unload the balloon driver in the guest in an unlucky event, > we won't free the pages. We are missing something like (if I am not wrong): > > diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c > index b1d2068fa2bd..e2b0925e1e83 100644 > --- a/drivers/virtio/virtio_balloon.c > +++ b/drivers/virtio/virtio_balloon.c > @@ -929,6 +929,10 @@ static void remove_common(struct virtio_balloon *vb) > leak_balloon(vb, vb->num_pages); > update_balloon_size(vb); > > + /* There might be free pages that are being reported: release them. */ > + if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT)) > + return_free_pages_to_mm(vb, ULONG_MAX); > + > /* Now we reset the device so we can clean up the queues. */ > vb->vdev->config->reset(vb->vdev);Indeed.> > Issue 2: When called via the shrinker, (but also to fix Issue 1), it could be > that we do have VIRTIO_BALLOON_F_MUST_TELL_HOST. I assume this means > (-ENOCLUE) that we have to wait until the hypervisor notifies us via the STOP? Or > for which event do we have to wait? Because there is no way to *tell host* here > that we want to reuse a page. The hypervisor will *tell us* when we can reuse pages. > For the shrinker it is simple: Don't use the shrinker with > VIRTIO_BALLOON_F_MUST_TELL_HOST :) . But to fix Issue 1, we *would* have to wait > until we get a STOP signal. That is not really possible because it might > take an infinite amount of time. > > Michael, any clue on which event we have to wait with > VIRTIO_BALLOON_F_MUST_TELL_HOST? IMHO, I don't think > VIRTIO_BALLOON_F_MUST_TELL_HOST applies to VIRTIO_BALLOON_F_FREE_PAGE_HINT and > we'd better document that. It introduces complexity with no clear benefit.I meant that we must wait for host to see the hint. Signalled via using the buffer. But maybe that's too far in the meaning from VIRTIO_BALLOON_F_MUST_TELL_HOST and we need a separate new flag for that. Then current code won't be broken (yay!) but we need to document another flag that's pretty similar.> > -- > Thanks, > > David / dhildenb
[...]>> >> Issue 2: When called via the shrinker, (but also to fix Issue 1), it could be >> that we do have VIRTIO_BALLOON_F_MUST_TELL_HOST. I assume this means >> (-ENOCLUE) that we have to wait until the hypervisor notifies us via the STOP? Or >> for which event do we have to wait? Because there is no way to *tell host* here >> that we want to reuse a page. The hypervisor will *tell us* when we can reuse pages. >> For the shrinker it is simple: Don't use the shrinker with >> VIRTIO_BALLOON_F_MUST_TELL_HOST :) . But to fix Issue 1, we *would* have to wait >> until we get a STOP signal. That is not really possible because it might >> take an infinite amount of time. >> >> Michael, any clue on which event we have to wait with >> VIRTIO_BALLOON_F_MUST_TELL_HOST? IMHO, I don't think >> VIRTIO_BALLOON_F_MUST_TELL_HOST applies to VIRTIO_BALLOON_F_FREE_PAGE_HINT and >> we'd better document that. It introduces complexity with no clear benefit. > > I meant that we must wait for host to see the hint. Signalled via using > the buffer. But maybe that's too far in the meaning from > VIRTIO_BALLOON_F_MUST_TELL_HOST and we need a separate new flag forYes, that's what I think.> that. Then current code won't be broken (yay!) but we need to > document another flag that's pretty similar.I mean, do we need a flag at all as long as there is no user? Introducing a flag and documenting it if nobody uses it does not sound like a work I will enjoy :) We can simply document "VIRTIO_BALLOON_F_MUST_TELL_HOST does not apply to FREE_PAGE_HINTING" and "with FREE_PAGE_HINTING, the guest can reuse pages any time, without waiting for a response/ack from the hypervisor". Thoughts? -- Thanks, David / dhildenb
On Tuesday, February 4, 2020 10:30 PM, David Hildenbrand wrote:> So, I am trying to understand how the code is intended to work, but I am > afraid I am missing something (or to rephrase: I think I found a BUG :) and > there is lack of proper documentation about this feature). > > a) We allocate pages and add them to the list as long as we are told to do > so. > We send these pages to the host one by one. > b) We free all pages once we get a STOP signal. Until then, we keep pages > allocated.Yes. Either host sends to the guest a STOP cmd or when the guest fails to allocate a page (meaning that all the possible free pages are taken already), the reporting ends.> c) When called via the shrinker, we want to free pages from the list, even > though the hypervisor did not notify us to do so. > > > Issue 1: When we unload the balloon driver in the guest in an unlucky event, > we won't free the pages. We are missing something like (if I am not wrong): > > diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c > index b1d2068fa2bd..e2b0925e1e83 100644 > --- a/drivers/virtio/virtio_balloon.c > +++ b/drivers/virtio/virtio_balloon.c > @@ -929,6 +929,10 @@ static void remove_common(struct virtio_balloon > *vb) > leak_balloon(vb, vb->num_pages); > update_balloon_size(vb); > > + /* There might be free pages that are being reported: release them. > */ > + if (virtio_has_feature(vb->vdev, > VIRTIO_BALLOON_F_FREE_PAGE_HINT)) > + return_free_pages_to_mm(vb, ULONG_MAX); > + > /* Now we reset the device so we can clean up the queues. */ > vb->vdev->config->reset(vb->vdev);Right, thanks!> > > Issue 2: When called via the shrinker, (but also to fix Issue 1), it could be that > we do have VIRTIO_BALLOON_F_MUST_TELL_HOST.I don't think it is an issue here. MUST_TELL_HOST is for the ballooning pages, where pages are offered to host to _USE_. For free page hint, as the name already suggests, it's just a _HINT_ , so in whatever use case, the host should not take the page to use. So the guest doesn't need to tell host and wait. Back to the implementation of virtio_balloon_shrinker_scan, which I don't see an issue so far: shrink_free_pages just return pages to mm without waiting for the ack from host shrink_balloon_pages goes through leak_balloon which tell_host before release the balloon pages. Best, Wei
On Wednesday, February 5, 2020 12:50 AM, Michael S. Tsirkin wrote:> > Michael, any clue on which event we have to wait with > > VIRTIO_BALLOON_F_MUST_TELL_HOST? IMHO, I don't think > > VIRTIO_BALLOON_F_MUST_TELL_HOST applies to > > VIRTIO_BALLOON_F_FREE_PAGE_HINT and we'd better document that. It > introduces complexity with no clear benefit. > > I meant that we must wait for host to see the hint.Why? Best, Wei
>> Issue 2: When called via the shrinker, (but also to fix Issue 1), it could be that >> we do have VIRTIO_BALLOON_F_MUST_TELL_HOST. > > I don't think it is an issue here. > MUST_TELL_HOST is for the ballooning pages, where pages are offered to host to _USE_. > For free page hint, as the name already suggests, it's just a _HINT_ , so in whatever use case, > the host should not take the page to use. So the guest doesn't need to tell host and wait.Yes, I agree with you. Yet, I am thinking about one (unlikely?impossible?) scenario. Can you refresh my brain why that cannot happen (IOW, why we don't have to wait for the host to process the request)? 1. Guest allocates a page and sends it to the host. 2. Shrinker gets active and releases that page again. 3. Some user in the guest allocates and modifies that page. After that, it is done using that page for the next hour. 4. The host processes the request and clears the bit in the dirty bitmap. 5. The guest is being migrated by the host. The modified page is not being migrated. -- Thanks, David / dhildenb
Possibly Parallel Threads
- Balloon pressuring page cache
- Balloon pressuring page cache
- Balloon pressuring page cache
- [PATCH AUTOSEL 5.6 165/606] virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
- [PATCH AUTOSEL 5.6 240/606] Revert "virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM""