thr3ads.net - Linux Virtualization - [RFC v4 0/3] vhost: introduce mdev based hardware backend [Sep 2019]

If this information is useful, please help other people find it:
Share via:

Tiwei Bie

2019-Sep-17 10:58 UTC

[RFC v4 0/3] vhost: introduce mdev based hardware backend

On Tue, Sep 17, 2019 at 11:32:03AM +0800, Jason Wang
wrote:> On 2019/9/17 ??9:02, Tiwei Bie wrote:
> > This RFC is to demonstrate below ideas,
> > 
> > a) Build vhost-mdev on top of the same abstraction defined in
> >     the virtio-mdev series [1];
> > 
> > b) Introduce /dev/vhost-mdev to do vhost ioctls and support
> >     setting mdev device as backend;
> > 
> > Now the userspace API looks like this:
> > 
> > - Userspace generates a compatible mdev device;
> > 
> > - Userspace opens this mdev device with VFIO API (including
> >    doing IOMMU programming for this mdev device with VFIO's
> >    container/group based interface);
> > 
> > - Userspace opens /dev/vhost-mdev and gets vhost fd;
> > 
> > - Userspace uses vhost ioctls to setup vhost (userspace should
> >    do VHOST_MDEV_SET_BACKEND ioctl with VFIO group fd and device
> >    fd first before doing other vhost ioctls);
> > 
> > Only compile test has been done for this series for now.
> 
> 
> Have a hard thought on the architecture:
Thanks a lot! Do appreciate it!
> 
> 1) Create a vhost char device and pass vfio mdev device fd to it as a
> backend and translate vhost-mdev ioctl to virtio mdev transport (e.g
> read/write). DMA was done through the VFIO DMA mapping on the container
that
> is attached.
Yeah, that's what we are doing in this series.
> 
> We have two more choices:
> 
> 2) Use vfio-mdev but do not create vhost-mdev device, instead, just
> implement vhost ioctl on vfio_device_ops, and translate them into
> virtio-mdev transport or just pass ioctl to parent.
Yeah. Instead of introducing /dev/vhost-mdev char device, do
vhost ioctls on VFIO device fd directly. That's what we did
in RFC v3.
> 
> 3) Don't use vfio-mdev, create a new vhost-mdev driver, during probe
still
> try to add dev to vfio group and talk to parent with device specific ops
If my understanding is correct, this means we need to introduce
a new VFIO device driver to replace the existing vfio-mdev driver
in our case. Below is a quick draft just to show my understanding:

#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/vfio.h>
#include <linux/mdev.h>

#include "mdev_private.h"

/* XXX: we need a proper way to include below vhost header. */
#include "../../vhost/vhost.h"

static int vfio_vhost_mdev_open(void *device_data)
{
	if (!try_module_get(THIS_MODULE))
		return -ENODEV;

	/* ... */
	vhost_dev_init(...);

	return 0;
}

static void vfio_vhost_mdev_release(void *device_data)
{
	/* ... */
	module_put(THIS_MODULE);
}

static long vfio_vhost_mdev_unlocked_ioctl(void *device_data,
					   unsigned int cmd, unsigned long arg)
{
	struct mdev_device *mdev = device_data;
	struct mdev_parent *parent = mdev->parent;

	/*
	 * Use vhost ioctls.
	 *
	 * We will have a different parent_ops design.
	 * And potentially, we can share the same parent_ops
	 * with virtio_mdev.
	 */
	switch (cmd) {
	case VHOST_GET_FEATURES:
		parent->ops->get_features(mdev, ...);
		break;
	/* ... */
	}

	return 0;
}

static ssize_t vfio_vhost_mdev_read(void *device_data, char __user *buf,
				    size_t count, loff_t *ppos)
{
	/* ... */
	return 0;
}

static ssize_t vfio_vhost_mdev_write(void *device_data, const char __user *buf,
				     size_t count, loff_t *ppos)
{
	/* ... */
	return 0;
}

static int vfio_vhost_mdev_mmap(void *device_data, struct vm_area_struct *vma)
{
	/* ... */
	return 0;
}

static const struct vfio_device_ops vfio_vhost_mdev_dev_ops = {
	.name		= "vfio-vhost-mdev",
	.open		= vfio_vhost_mdev_open,
	.release	= vfio_vhost_mdev_release,
	.ioctl		= vfio_vhost_mdev_unlocked_ioctl,
	.read		= vfio_vhost_mdev_read,
	.write		= vfio_vhost_mdev_write,
	.mmap		= vfio_vhost_mdev_mmap,
};

static int vfio_vhost_mdev_probe(struct device *dev)
{
	struct mdev_device *mdev = to_mdev_device(dev);

	/* ... */
	return vfio_add_group_dev(dev, &vfio_vhost_mdev_dev_ops, mdev);
}

static void vfio_vhost_mdev_remove(struct device *dev)
{
	/* ... */
	vfio_del_group_dev(dev);
}

static struct mdev_driver vfio_vhost_mdev_driver = {
	.name	= "vfio_vhost_mdev",
	.probe	= vfio_vhost_mdev_probe,
	.remove	= vfio_vhost_mdev_remove,
};

static int __init vfio_vhost_mdev_init(void)
{
	return mdev_register_driver(&vfio_vhost_mdev_driver, THIS_MODULE);
}
module_init(vfio_vhost_mdev_init)

static void __exit vfio_vhost_mdev_exit(void)
{
	mdev_unregister_driver(&vfio_vhost_mdev_driver);
}
module_exit(vfio_vhost_mdev_exit)
> 
> So I have some questions:
> 
> 1) Compared to method 2, what's the advantage of creating a new vhost
char
> device? I guess it's for keep the API compatibility?
One benefit is that we can avoid doing vhost ioctls on
VFIO device fd.
> 
> 2) For method 2, is there any easy way for user/admin to distinguish e.g
> ordinary vfio-mdev for vhost from ordinary vfio-mdev?
I think device-api could be a choice.
> I saw you introduce
> ops matching helper but it's not friendly to management.
The ops matching helper is just to check whether a given
vfio-device is based on a mdev device.
> 
> 3) A drawback of 1) and 2) is that it must follow vfio_device_ops that
> assumes the parameter comes from userspace, it prevents support kernel
> virtio drivers.
> 
> 4) So comes the idea of method 3, since it register a new vhost-mdev
driver,
> we can use device specific ops instead of VFIO ones, then we can have a
> common API between vDPA parent and vhost-mdev/virtio-mdev drivers.
As the above draft shows, this requires introducing a new
VFIO device driver. I think Alex's opinion matters here.

Thanks,
Tiwei
> 
> What's your thoughts?
> 
> Thanks
> 
> 
> > 
> > RFCv3: https://patchwork.kernel.org/patch/11117785/
> > 
> > [1] https://lkml.org/lkml/2019/9/10/135
> > 
> > Tiwei Bie (3):
> >    vfio: support getting vfio device from device fd
> >    vfio: support checking vfio driver by device ops
> >    vhost: introduce mdev based hardware backend
> > 
> >   drivers/vfio/mdev/vfio_mdev.c    |   3 +-
> >   drivers/vfio/vfio.c              |  32 +++
> >   drivers/vhost/Kconfig            |   9 +
> >   drivers/vhost/Makefile           |   3 +
> >   drivers/vhost/mdev.c             | 462
+++++++++++++++++++++++++++++++
> >   drivers/vhost/vhost.c            |  39 ++-
> >   drivers/vhost/vhost.h            |   6 +
> >   include/linux/vfio.h             |  11 +
> >   include/uapi/linux/vhost.h       |  10 +
> >   include/uapi/linux/vhost_types.h |   5 +
> >   10 files changed, 573 insertions(+), 7 deletions(-)
> >   create mode 100644 drivers/vhost/mdev.c
> >

Jason Wang

2019-Sep-18 05:51 UTC

head link

[RFC v4 0/3] vhost: introduce mdev based hardware backend

On 2019/9/17 ??6:58, Tiwei Bie wrote:> On Tue, Sep 17, 2019 at 11:32:03AM +0800, Jason Wang wrote:
>> On 2019/9/17 ??9:02, Tiwei Bie wrote:
>>> This RFC is to demonstrate below ideas,
>>>
>>> a) Build vhost-mdev on top of the same abstraction defined in
>>>      the virtio-mdev series [1];
>>>
>>> b) Introduce /dev/vhost-mdev to do vhost ioctls and support
>>>      setting mdev device as backend;
>>>
>>> Now the userspace API looks like this:
>>>
>>> - Userspace generates a compatible mdev device;
>>>
>>> - Userspace opens this mdev device with VFIO API (including
>>>     doing IOMMU programming for this mdev device with VFIO's
>>>     container/group based interface);
>>>
>>> - Userspace opens /dev/vhost-mdev and gets vhost fd;
>>>
>>> - Userspace uses vhost ioctls to setup vhost (userspace should
>>>     do VHOST_MDEV_SET_BACKEND ioctl with VFIO group fd and device
>>>     fd first before doing other vhost ioctls);
>>>
>>> Only compile test has been done for this series for now.
>>
>> Have a hard thought on the architecture:
> Thanks a lot! Do appreciate it!
>
>> 1) Create a vhost char device and pass vfio mdev device fd to it as a
>> backend and translate vhost-mdev ioctl to virtio mdev transport (e.g
>> read/write). DMA was done through the VFIO DMA mapping on the container
that
>> is attached.
> Yeah, that's what we are doing in this series.
>
>> We have two more choices:
>>
>> 2) Use vfio-mdev but do not create vhost-mdev device, instead, just
>> implement vhost ioctl on vfio_device_ops, and translate them into
>> virtio-mdev transport or just pass ioctl to parent.
> Yeah. Instead of introducing /dev/vhost-mdev char device, do
> vhost ioctls on VFIO device fd directly. That's what we did
> in RFC v3.
>
>> 3) Don't use vfio-mdev, create a new vhost-mdev driver, during
probe still
>> try to add dev to vfio group and talk to parent with device specific
ops
> If my understanding is correct, this means we need to introduce
> a new VFIO device driver to replace the existing vfio-mdev driver
> in our case. Below is a quick draft just to show my understanding:
>
> #include <linux/init.h>
> #include <linux/module.h>
> #include <linux/device.h>
> #include <linux/kernel.h>
> #include <linux/slab.h>
> #include <linux/vfio.h>
> #include <linux/mdev.h>
>
> #include "mdev_private.h"
>
> /* XXX: we need a proper way to include below vhost header. */
> #include "../../vhost/vhost.h"
>
> static int vfio_vhost_mdev_open(void *device_data)
> {
> 	if (!try_module_get(THIS_MODULE))
> 		return -ENODEV;
>
> 	/* ... */
> 	vhost_dev_init(...);
>
> 	return 0;
> }
>
> static void vfio_vhost_mdev_release(void *device_data)
> {
> 	/* ... */
> 	module_put(THIS_MODULE);
> }
>
> static long vfio_vhost_mdev_unlocked_ioctl(void *device_data,
> 					   unsigned int cmd, unsigned long arg)
> {
> 	struct mdev_device *mdev = device_data;
> 	struct mdev_parent *parent = mdev->parent;
>
> 	/*
> 	 * Use vhost ioctls.
> 	 *
> 	 * We will have a different parent_ops design.
> 	 * And potentially, we can share the same parent_ops
> 	 * with virtio_mdev.
> 	 */
> 	switch (cmd) {
> 	case VHOST_GET_FEATURES:
> 		parent->ops->get_features(mdev, ...);
> 		break;
> 	/* ... */
> 	}
>
> 	return 0;
> }
>
> static ssize_t vfio_vhost_mdev_read(void *device_data, char __user *buf,
> 				    size_t count, loff_t *ppos)
> {
> 	/* ... */
> 	return 0;
> }
>
> static ssize_t vfio_vhost_mdev_write(void *device_data, const char __user
*buf,
> 				     size_t count, loff_t *ppos)
> {
> 	/* ... */
> 	return 0;
> }
>
> static int vfio_vhost_mdev_mmap(void *device_data, struct vm_area_struct
*vma)
> {
> 	/* ... */
> 	return 0;
> }
>
> static const struct vfio_device_ops vfio_vhost_mdev_dev_ops = {
> 	.name		= "vfio-vhost-mdev",
> 	.open		= vfio_vhost_mdev_open,
> 	.release	= vfio_vhost_mdev_release,
> 	.ioctl		= vfio_vhost_mdev_unlocked_ioctl,
> 	.read		= vfio_vhost_mdev_read,
> 	.write		= vfio_vhost_mdev_write,
> 	.mmap		= vfio_vhost_mdev_mmap,
> };
>
> static int vfio_vhost_mdev_probe(struct device *dev)
> {
> 	struct mdev_device *mdev = to_mdev_device(dev);
>
> 	/* ... */
> 	return vfio_add_group_dev(dev, &vfio_vhost_mdev_dev_ops, mdev);
> }
>
> static void vfio_vhost_mdev_remove(struct device *dev)
> {
> 	/* ... */
> 	vfio_del_group_dev(dev);
> }
>
> static struct mdev_driver vfio_vhost_mdev_driver = {
> 	.name	= "vfio_vhost_mdev",
> 	.probe	= vfio_vhost_mdev_probe,
> 	.remove	= vfio_vhost_mdev_remove,
> };
>
> static int __init vfio_vhost_mdev_init(void)
> {
> 	return mdev_register_driver(&vfio_vhost_mdev_driver, THIS_MODULE);
> }
> module_init(vfio_vhost_mdev_init)
>
> static void __exit vfio_vhost_mdev_exit(void)
> {
> 	mdev_unregister_driver(&vfio_vhost_mdev_driver);
> }
> module_exit(vfio_vhost_mdev_exit)

Yes, something like this basically.

>> So I have some questions:
>>
>> 1) Compared to method 2, what's the advantage of creating a new
vhost char
>> device? I guess it's for keep the API compatibility?
> One benefit is that we can avoid doing vhost ioctls on
> VFIO device fd.

Yes, but any benefit from doing this?

>
>> 2) For method 2, is there any easy way for user/admin to distinguish
e.g
>> ordinary vfio-mdev for vhost from ordinary vfio-mdev?
> I think device-api could be a choice.

Ok.

>
>> I saw you introduce
>> ops matching helper but it's not friendly to management.
> The ops matching helper is just to check whether a given
> vfio-device is based on a mdev device.
>
>> 3) A drawback of 1) and 2) is that it must follow vfio_device_ops that
>> assumes the parameter comes from userspace, it prevents support kernel
>> virtio drivers.
>>
>> 4) So comes the idea of method 3, since it register a new vhost-mdev
driver,
>> we can use device specific ops instead of VFIO ones, then we can have a
>> common API between vDPA parent and vhost-mdev/virtio-mdev drivers.
> As the above draft shows, this requires introducing a new
> VFIO device driver. I think Alex's opinion matters here.

Yes, it is.

Thanks

> Thanks,
> Tiwei
>
>> What's your thoughts?
>>
>> Thanks
>>
>>
>>> RFCv3: https://patchwork.kernel.org/patch/11117785/
>>>
>>> [1] https://lkml.org/lkml/2019/9/10/135
>>>
>>> Tiwei Bie (3):
>>>     vfio: support getting vfio device from device fd
>>>     vfio: support checking vfio driver by device ops
>>>     vhost: introduce mdev based hardware backend
>>>
>>>    drivers/vfio/mdev/vfio_mdev.c    |   3 +-
>>>    drivers/vfio/vfio.c              |  32 +++
>>>    drivers/vhost/Kconfig            |   9 +
>>>    drivers/vhost/Makefile           |   3 +
>>>    drivers/vhost/mdev.c             | 462
+++++++++++++++++++++++++++++++
>>>    drivers/vhost/vhost.c            |  39 ++-
>>>    drivers/vhost/vhost.h            |   6 +
>>>    include/linux/vfio.h             |  11 +
>>>    include/uapi/linux/vhost.h       |  10 +
>>>    include/uapi/linux/vhost_types.h |   5 +
>>>    10 files changed, 573 insertions(+), 7 deletions(-)
>>>    create mode 100644 drivers/vhost/mdev.c
>>>

Michael S. Tsirkin

2019-Sep-18 14:32 UTC

head link

[RFC v4 0/3] vhost: introduce mdev based hardware backend

On Wed, Sep 18, 2019 at 01:51:21PM +0800, Jason Wang
wrote:> 
> On 2019/9/17 ??6:58, Tiwei Bie wrote:
> > On Tue, Sep 17, 2019 at 11:32:03AM +0800, Jason Wang wrote:
> > > On 2019/9/17 ??9:02, Tiwei Bie wrote:
> > > > This RFC is to demonstrate below ideas,
> > > > 
> > > > a) Build vhost-mdev on top of the same abstraction defined
in
> > > >      the virtio-mdev series [1];
> > > > 
> > > > b) Introduce /dev/vhost-mdev to do vhost ioctls and support
> > > >      setting mdev device as backend;
> > > > 
> > > > Now the userspace API looks like this:
> > > > 
> > > > - Userspace generates a compatible mdev device;
> > > > 
> > > > - Userspace opens this mdev device with VFIO API (including
> > > >     doing IOMMU programming for this mdev device with
VFIO's
> > > >     container/group based interface);
> > > > 
> > > > - Userspace opens /dev/vhost-mdev and gets vhost fd;
> > > > 
> > > > - Userspace uses vhost ioctls to setup vhost (userspace
should
> > > >     do VHOST_MDEV_SET_BACKEND ioctl with VFIO group fd and
device
> > > >     fd first before doing other vhost ioctls);
> > > > 
> > > > Only compile test has been done for this series for now.
> > > 
> > > Have a hard thought on the architecture:
> > Thanks a lot! Do appreciate it!
> > 
> > > 1) Create a vhost char device and pass vfio mdev device fd to it
as a
> > > backend and translate vhost-mdev ioctl to virtio mdev transport
(e.g
> > > read/write). DMA was done through the VFIO DMA mapping on the
container that
> > > is attached.
> > Yeah, that's what we are doing in this series.
> > 
> > > We have two more choices:
> > > 
> > > 2) Use vfio-mdev but do not create vhost-mdev device, instead,
just
> > > implement vhost ioctl on vfio_device_ops, and translate them into
> > > virtio-mdev transport or just pass ioctl to parent.
> > Yeah. Instead of introducing /dev/vhost-mdev char device, do
> > vhost ioctls on VFIO device fd directly. That's what we did
> > in RFC v3.
> > 
> > > 3) Don't use vfio-mdev, create a new vhost-mdev driver,
during probe still
> > > try to add dev to vfio group and talk to parent with device
specific ops
> > If my understanding is correct, this means we need to introduce
> > a new VFIO device driver to replace the existing vfio-mdev driver
> > in our case. Below is a quick draft just to show my understanding:
> > 
> > #include <linux/init.h>
> > #include <linux/module.h>
> > #include <linux/device.h>
> > #include <linux/kernel.h>
> > #include <linux/slab.h>
> > #include <linux/vfio.h>
> > #include <linux/mdev.h>
> > 
> > #include "mdev_private.h"
> > 
> > /* XXX: we need a proper way to include below vhost header. */
> > #include "../../vhost/vhost.h"
> > 
> > static int vfio_vhost_mdev_open(void *device_data)
> > {
> > 	if (!try_module_get(THIS_MODULE))
> > 		return -ENODEV;
> > 
> > 	/* ... */
> > 	vhost_dev_init(...);
> > 
> > 	return 0;
> > }
> > 
> > static void vfio_vhost_mdev_release(void *device_data)
> > {
> > 	/* ... */
> > 	module_put(THIS_MODULE);
> > }
> > 
> > static long vfio_vhost_mdev_unlocked_ioctl(void *device_data,
> > 					   unsigned int cmd, unsigned long arg)
> > {
> > 	struct mdev_device *mdev = device_data;
> > 	struct mdev_parent *parent = mdev->parent;
> > 
> > 	/*
> > 	 * Use vhost ioctls.
> > 	 *
> > 	 * We will have a different parent_ops design.
> > 	 * And potentially, we can share the same parent_ops
> > 	 * with virtio_mdev.
> > 	 */
> > 	switch (cmd) {
> > 	case VHOST_GET_FEATURES:
> > 		parent->ops->get_features(mdev, ...);
> > 		break;
> > 	/* ... */
> > 	}
> > 
> > 	return 0;
> > }
> > 
> > static ssize_t vfio_vhost_mdev_read(void *device_data, char __user
*buf,
> > 				    size_t count, loff_t *ppos)
> > {
> > 	/* ... */
> > 	return 0;
> > }
> > 
> > static ssize_t vfio_vhost_mdev_write(void *device_data, const char
__user *buf,
> > 				     size_t count, loff_t *ppos)
> > {
> > 	/* ... */
> > 	return 0;
> > }
> > 
> > static int vfio_vhost_mdev_mmap(void *device_data, struct
vm_area_struct *vma)
> > {
> > 	/* ... */
> > 	return 0;
> > }
> > 
> > static const struct vfio_device_ops vfio_vhost_mdev_dev_ops = {
> > 	.name		= "vfio-vhost-mdev",
> > 	.open		= vfio_vhost_mdev_open,
> > 	.release	= vfio_vhost_mdev_release,
> > 	.ioctl		= vfio_vhost_mdev_unlocked_ioctl,
> > 	.read		= vfio_vhost_mdev_read,
> > 	.write		= vfio_vhost_mdev_write,
> > 	.mmap		= vfio_vhost_mdev_mmap,
> > };
> > 
> > static int vfio_vhost_mdev_probe(struct device *dev)
> > {
> > 	struct mdev_device *mdev = to_mdev_device(dev);
> > 
> > 	/* ... */
> > 	return vfio_add_group_dev(dev, &vfio_vhost_mdev_dev_ops, mdev);
> > }
> > 
> > static void vfio_vhost_mdev_remove(struct device *dev)
> > {
> > 	/* ... */
> > 	vfio_del_group_dev(dev);
> > }
> > 
> > static struct mdev_driver vfio_vhost_mdev_driver = {
> > 	.name	= "vfio_vhost_mdev",
> > 	.probe	= vfio_vhost_mdev_probe,
> > 	.remove	= vfio_vhost_mdev_remove,
> > };
> > 
> > static int __init vfio_vhost_mdev_init(void)
> > {
> > 	return mdev_register_driver(&vfio_vhost_mdev_driver,
THIS_MODULE);
> > }
> > module_init(vfio_vhost_mdev_init)
> > 
> > static void __exit vfio_vhost_mdev_exit(void)
> > {
> > 	mdev_unregister_driver(&vfio_vhost_mdev_driver);
> > }
> > module_exit(vfio_vhost_mdev_exit)
> 
> 
> Yes, something like this basically.
> 
> 
> > > So I have some questions:
> > > 
> > > 1) Compared to method 2, what's the advantage of creating a
new vhost char
> > > device? I guess it's for keep the API compatibility?
> > One benefit is that we can avoid doing vhost ioctls on
> > VFIO device fd.
> 
> 
> Yes, but any benefit from doing this?
It does seem a bit more modular, but it's certainly not a big deal.
> > 
> > > 2) For method 2, is there any easy way for user/admin to
distinguish e.g
> > > ordinary vfio-mdev for vhost from ordinary vfio-mdev?
> > I think device-api could be a choice.
> 
> 
> Ok.
> 
> 
> > 
> > > I saw you introduce
> > > ops matching helper but it's not friendly to management.
> > The ops matching helper is just to check whether a given
> > vfio-device is based on a mdev device.
> > 
> > > 3) A drawback of 1) and 2) is that it must follow vfio_device_ops
that
> > > assumes the parameter comes from userspace, it prevents support
kernel
> > > virtio drivers.
> > > 
> > > 4) So comes the idea of method 3, since it register a new
vhost-mdev driver,
> > > we can use device specific ops instead of VFIO ones, then we can
have a
> > > common API between vDPA parent and vhost-mdev/virtio-mdev
drivers.
> > As the above draft shows, this requires introducing a new
> > VFIO device driver. I think Alex's opinion matters here.
> 
> 
> Yes, it is.
> 
> Thanks
> 
> 
> > Thanks,
> > Tiwei
> > 
> > > What's your thoughts?
> > > 
> > > Thanks
> > > 
> > > 
> > > > RFCv3: https://patchwork.kernel.org/patch/11117785/
> > > > 
> > > > [1] https://lkml.org/lkml/2019/9/10/135
> > > > 
> > > > Tiwei Bie (3):
> > > >     vfio: support getting vfio device from device fd
> > > >     vfio: support checking vfio driver by device ops
> > > >     vhost: introduce mdev based hardware backend
> > > > 
> > > >    drivers/vfio/mdev/vfio_mdev.c    |   3 +-
> > > >    drivers/vfio/vfio.c              |  32 +++
> > > >    drivers/vhost/Kconfig            |   9 +
> > > >    drivers/vhost/Makefile           |   3 +
> > > >    drivers/vhost/mdev.c             | 462
+++++++++++++++++++++++++++++++
> > > >    drivers/vhost/vhost.c            |  39 ++-
> > > >    drivers/vhost/vhost.h            |   6 +
> > > >    include/linux/vfio.h             |  11 +
> > > >    include/uapi/linux/vhost.h       |  10 +
> > > >    include/uapi/linux/vhost_types.h |   5 +
> > > >    10 files changed, 573 insertions(+), 7 deletions(-)
> > > >    create mode 100644 drivers/vhost/mdev.c
> > > >

Possibly Parallel Threads

Search for more apparently analagous threads

Linux Virtualization - Sep 2019 - [RFC v4 0/3] vhost: introduce mdev based hardware backend

[RFC v4 0/3] vhost: introduce mdev based hardware backend

[RFC v4 0/3] vhost: introduce mdev based hardware backend

[RFC v4 0/3] vhost: introduce mdev based hardware backend

Possibly Parallel Threads