Paolo Bonzini
2017-Jul-04 09:24 UTC
[PATCH v2] virtio-blk: add DISCARD support to virtio-blk driver
On 05/07/2017 10:44, Changpeng Liu wrote:> Currently virtio-blk driver does not provide discard feature flag, so the > filesystems which built on top of the block device will not send discard > command. This is okay for HDD backend, but it will impact the performance > for SSD backend. > > Add a feature flag VIRTIO_BLK_F_DISCARD and command VIRTIO_BLK_T_DISCARD > to extend exist virtio-blk protocol, define 16 bytes discard descriptor > for each discard segment, the discard segment defination aligns with > SCSI or NVM Express protocols, virtio-blk driver will support multi-range > discard request as well. > > Signed-off-by: Changpeng Liu <changpeng.liu at intel.com>Please include a patch for the specification. Since we are at it, I would like to have three operations defined using the same descriptor: - discard (SCSI UNMAP) - write zeroes (SCSI WRITE SAME without UNMAP flag) - write zeroes and possibly discard (SCSI WRITE SAME with UNMAP flag) The last two can use the same command VIRTIO_BLK_T_WRITE_ZEROES, using the reserved field as a flags field. Paolo> --- > drivers/block/virtio_blk.c | 76 +++++++++++++++++++++++++++++++++++++++-- > include/uapi/linux/virtio_blk.h | 19 +++++++++++ > 2 files changed, 92 insertions(+), 3 deletions(-) > > diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c > index 0297ad7..8f0c614 100644 > --- a/drivers/block/virtio_blk.c > +++ b/drivers/block/virtio_blk.c > @@ -172,10 +172,52 @@ static int virtblk_add_req(struct virtqueue *vq, struct virtblk_req *vbr, > return virtqueue_add_sgs(vq, sgs, num_out, num_in, vbr, GFP_ATOMIC); > } > > +static inline int virtblk_setup_discard(struct request *req) > +{ > + unsigned short segments = blk_rq_nr_discard_segments(req), n = 0; > + u32 block_size = queue_logical_block_size(req->q); > + struct virtio_blk_discard *range; > + struct bio *bio; > + > + if (block_size < 512 || !block_size) > + return -1; > + > + range = kmalloc_array(segments, sizeof(*range), GFP_ATOMIC); > + if (!range) > + return -1; > + > + __rq_for_each_bio(bio, req) { > + u64 slba = (bio->bi_iter.bi_sector << 9) / block_size; > + u32 nlb = bio->bi_iter.bi_size / block_size; > + > + range[n].reserved = cpu_to_le32(0); > + range[n].nlba = cpu_to_le32(nlb); > + range[n].slba = cpu_to_le64(slba); > + n++; > + } > + > + if (WARN_ON_ONCE(n != segments)) { > + kfree(range); > + return -1; > + } > + > + req->special_vec.bv_page = virt_to_page(range); > + req->special_vec.bv_offset = offset_in_page(range); > + req->special_vec.bv_len = sizeof(*range) * segments; > + req->rq_flags |= RQF_SPECIAL_PAYLOAD; > + > + return 0; > +} > + > static inline void virtblk_request_done(struct request *req) > { > struct virtblk_req *vbr = blk_mq_rq_to_pdu(req); > > + if (req->rq_flags & RQF_SPECIAL_PAYLOAD) { > + kfree(page_address(req->special_vec.bv_page) + > + req->special_vec.bv_offset); > + } > + > switch (req_op(req)) { > case REQ_OP_SCSI_IN: > case REQ_OP_SCSI_OUT: > @@ -237,6 +279,9 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx, > case REQ_OP_FLUSH: > type = VIRTIO_BLK_T_FLUSH; > break; > + case REQ_OP_DISCARD: > + type = VIRTIO_BLK_T_DISCARD; > + break; > case REQ_OP_SCSI_IN: > case REQ_OP_SCSI_OUT: > type = VIRTIO_BLK_T_SCSI_CMD; > @@ -256,9 +301,15 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx, > > blk_mq_start_request(req); > > + if (type == VIRTIO_BLK_T_DISCARD) { > + err = virtblk_setup_discard(req); > + if (err) > + return BLK_STS_IOERR; > + } > + > num = blk_rq_map_sg(hctx->queue, req, vbr->sg); > if (num) { > - if (rq_data_dir(req) == WRITE) > + if (rq_data_dir(req) == WRITE || type == VIRTIO_BLK_T_DISCARD) > vbr->out_hdr.type |= cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_OUT); > else > vbr->out_hdr.type |= cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_IN); > @@ -767,6 +818,25 @@ static int virtblk_probe(struct virtio_device *vdev) > if (!err && opt_io_size) > blk_queue_io_opt(q, blk_size * opt_io_size); > > + if (virtio_has_feature(vdev, VIRTIO_BLK_F_DISCARD)) { > + q->limits.discard_alignment = blk_size; > + q->limits.discard_granularity = blk_size; > + > + virtio_cread(vdev, struct virtio_blk_config, max_discard_seg, &v); > + if (v) > + blk_queue_max_discard_sectors(q, v); > + else > + blk_queue_max_discard_sectors(q, -1U); > + > + virtio_cread(vdev, struct virtio_blk_config, max_discard_num, &v); > + if (v) > + blk_queue_max_discard_segments(q, v); > + else > + blk_queue_max_discard_segments(q, 256); > + > + queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); > + } > + > virtio_device_ready(vdev); > > device_add_disk(&vdev->dev, vblk->disk); > @@ -874,14 +944,14 @@ static int virtblk_restore(struct virtio_device *vdev) > VIRTIO_BLK_F_SCSI, > #endif > VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY, VIRTIO_BLK_F_CONFIG_WCE, > - VIRTIO_BLK_F_MQ, > + VIRTIO_BLK_F_MQ, VIRTIO_BLK_F_DISCARD, > } > ; > static unsigned int features[] = { > VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, VIRTIO_BLK_F_GEOMETRY, > VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE, > VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY, VIRTIO_BLK_F_CONFIG_WCE, > - VIRTIO_BLK_F_MQ, > + VIRTIO_BLK_F_MQ, VIRTIO_BLK_F_DISCARD, > }; > > static struct virtio_driver virtio_blk = { > diff --git a/include/uapi/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h > index 9ebe4d9..3354cc3 100644 > --- a/include/uapi/linux/virtio_blk.h > +++ b/include/uapi/linux/virtio_blk.h > @@ -38,6 +38,7 @@ > #define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/ > #define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */ > #define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ > +#define VIRTIO_BLK_F_DISCARD 13 /* DISCARD command is supported */ > > /* Legacy feature bits */ > #ifndef VIRTIO_BLK_NO_LEGACY > @@ -86,6 +87,10 @@ struct virtio_blk_config { > > /* number of vqs, only available when VIRTIO_BLK_F_MQ is set */ > __u16 num_queues; > + /* The maximum segment size (if VIRTIO_BLK_F_DISCARD) */ > + __u32 max_discard_seg; > + /* The maximum number of segments (if VIRTIO_BLK_F_DISCARD) */ > + __u32 max_discard_num; > } __attribute__((packed)); > > /* > @@ -114,6 +119,9 @@ struct virtio_blk_config { > /* Get device ID command */ > #define VIRTIO_BLK_T_GET_ID 8 > > +/* Discard command */ > +#define VIRTIO_BLK_T_DISCARD 16 > + > #ifndef VIRTIO_BLK_NO_LEGACY > /* Barrier before this op. */ > #define VIRTIO_BLK_T_BARRIER 0x80000000 > @@ -133,6 +141,17 @@ struct virtio_blk_outhdr { > __virtio64 sector; > }; > > +/* > + * Array of discard ranges for each request. > + */ > +struct virtio_blk_discard { > + /* start discard lba */ > + __virtio64 slba; > + /* number of discard sectors */ > + __virtio32 nlba; > + __virtio32 reserved; > +}; > + > #ifndef VIRTIO_BLK_NO_LEGACY > struct virtio_scsi_inhdr { > __virtio32 errors; >
Michael S. Tsirkin
2017-Jul-04 21:35 UTC
[PATCH v2] virtio-blk: add DISCARD support to virtio-blk driver
On Tue, Jul 04, 2017 at 11:24:01AM +0200, Paolo Bonzini wrote:> > > On 05/07/2017 10:44, Changpeng Liu wrote: > > Currently virtio-blk driver does not provide discard feature flag, so the > > filesystems which built on top of the block device will not send discard > > command. This is okay for HDD backend, but it will impact the performance > > for SSD backend. > > > > Add a feature flag VIRTIO_BLK_F_DISCARD and command VIRTIO_BLK_T_DISCARD > > to extend exist virtio-blk protocol, define 16 bytes discard descriptor > > for each discard segment, the discard segment defination aligns with > > SCSI or NVM Express protocols, virtio-blk driver will support multi-range > > discard request as well. > > > > Signed-off-by: Changpeng Liu <changpeng.liu at intel.com> > > Please include a patch for the specification.Most importantly, please remember to copy virtio-dev at lists.oasis-open.org on anything that changes the host/guest interface.> Since we are at it, I > would like to have three operations defined using the same descriptor: > > - discard (SCSI UNMAP) > > - write zeroes (SCSI WRITE SAME without UNMAP flag) > > - write zeroes and possibly discard (SCSI WRITE SAME with UNMAP flag) > > The last two can use the same command VIRTIO_BLK_T_WRITE_ZEROES, using > the reserved field as a flags field. > > Paolo> > --- > > drivers/block/virtio_blk.c | 76 +++++++++++++++++++++++++++++++++++++++-- > > include/uapi/linux/virtio_blk.h | 19 +++++++++++ > > 2 files changed, 92 insertions(+), 3 deletions(-)
Liu, Changpeng
2017-Jul-05 07:57 UTC
[PATCH v2] virtio-blk: add DISCARD support to virtio-blk driver
> -----Original Message----- > From: Paolo Bonzini [mailto:pbonzini at redhat.com] > Sent: Tuesday, July 4, 2017 5:24 PM > To: Liu, Changpeng <changpeng.liu at intel.com>; virtualization at lists.linux- > foundation.org > Cc: stefanha at gmail.com; hch at lst.de; mst at redhat.com > Subject: Re: [PATCH v2] virtio-blk: add DISCARD support to virtio-blk driver > > > > On 05/07/2017 10:44, Changpeng Liu wrote: > > Currently virtio-blk driver does not provide discard feature flag, so the > > filesystems which built on top of the block device will not send discard > > command. This is okay for HDD backend, but it will impact the performance > > for SSD backend. > > > > Add a feature flag VIRTIO_BLK_F_DISCARD and command > VIRTIO_BLK_T_DISCARD > > to extend exist virtio-blk protocol, define 16 bytes discard descriptor > > for each discard segment, the discard segment defination aligns with > > SCSI or NVM Express protocols, virtio-blk driver will support multi-range > > discard request as well. > > > > Signed-off-by: Changpeng Liu <changpeng.liu at intel.com> > > Please include a patch for the specification. Since we are at it, IThanks Paolo, do you mean include a text file which describe the changes for the specification?> would like to have three operations defined using the same descriptor: > > - discard (SCSI UNMAP) > > - write zeroes (SCSI WRITE SAME without UNMAP flag) > > - write zeroes and possibly discard (SCSI WRITE SAME with UNMAP flag) > > The last two can use the same command VIRTIO_BLK_T_WRITE_ZEROES, using > the reserved field as a flags field.Will add write zeroes feature.> > Paolo > > > --- > > drivers/block/virtio_blk.c | 76 > +++++++++++++++++++++++++++++++++++++++-- > > include/uapi/linux/virtio_blk.h | 19 +++++++++++ > > 2 files changed, 92 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c > > index 0297ad7..8f0c614 100644 > > --- a/drivers/block/virtio_blk.c > > +++ b/drivers/block/virtio_blk.c > > @@ -172,10 +172,52 @@ static int virtblk_add_req(struct virtqueue *vq, struct > virtblk_req *vbr, > > return virtqueue_add_sgs(vq, sgs, num_out, num_in, vbr, GFP_ATOMIC); > > } > > > > +static inline int virtblk_setup_discard(struct request *req) > > +{ > > + unsigned short segments = blk_rq_nr_discard_segments(req), n = 0; > > + u32 block_size = queue_logical_block_size(req->q); > > + struct virtio_blk_discard *range; > > + struct bio *bio; > > + > > + if (block_size < 512 || !block_size) > > + return -1; > > + > > + range = kmalloc_array(segments, sizeof(*range), GFP_ATOMIC); > > + if (!range) > > + return -1; > > + > > + __rq_for_each_bio(bio, req) { > > + u64 slba = (bio->bi_iter.bi_sector << 9) / block_size; > > + u32 nlb = bio->bi_iter.bi_size / block_size; > > + > > + range[n].reserved = cpu_to_le32(0); > > + range[n].nlba = cpu_to_le32(nlb); > > + range[n].slba = cpu_to_le64(slba); > > + n++; > > + } > > + > > + if (WARN_ON_ONCE(n != segments)) { > > + kfree(range); > > + return -1; > > + } > > + > > + req->special_vec.bv_page = virt_to_page(range); > > + req->special_vec.bv_offset = offset_in_page(range); > > + req->special_vec.bv_len = sizeof(*range) * segments; > > + req->rq_flags |= RQF_SPECIAL_PAYLOAD; > > + > > + return 0; > > +} > > + > > static inline void virtblk_request_done(struct request *req) > > { > > struct virtblk_req *vbr = blk_mq_rq_to_pdu(req); > > > > + if (req->rq_flags & RQF_SPECIAL_PAYLOAD) { > > + kfree(page_address(req->special_vec.bv_page) + > > + req->special_vec.bv_offset); > > + } > > + > > switch (req_op(req)) { > > case REQ_OP_SCSI_IN: > > case REQ_OP_SCSI_OUT: > > @@ -237,6 +279,9 @@ static blk_status_t virtio_queue_rq(struct > blk_mq_hw_ctx *hctx, > > case REQ_OP_FLUSH: > > type = VIRTIO_BLK_T_FLUSH; > > break; > > + case REQ_OP_DISCARD: > > + type = VIRTIO_BLK_T_DISCARD; > > + break; > > case REQ_OP_SCSI_IN: > > case REQ_OP_SCSI_OUT: > > type = VIRTIO_BLK_T_SCSI_CMD; > > @@ -256,9 +301,15 @@ static blk_status_t virtio_queue_rq(struct > blk_mq_hw_ctx *hctx, > > > > blk_mq_start_request(req); > > > > + if (type == VIRTIO_BLK_T_DISCARD) { > > + err = virtblk_setup_discard(req); > > + if (err) > > + return BLK_STS_IOERR; > > + } > > + > > num = blk_rq_map_sg(hctx->queue, req, vbr->sg); > > if (num) { > > - if (rq_data_dir(req) == WRITE) > > + if (rq_data_dir(req) == WRITE || type == VIRTIO_BLK_T_DISCARD) > > vbr->out_hdr.type |= cpu_to_virtio32(vblk->vdev, > VIRTIO_BLK_T_OUT); > > else > > vbr->out_hdr.type |= cpu_to_virtio32(vblk->vdev, > VIRTIO_BLK_T_IN); > > @@ -767,6 +818,25 @@ static int virtblk_probe(struct virtio_device *vdev) > > if (!err && opt_io_size) > > blk_queue_io_opt(q, blk_size * opt_io_size); > > > > + if (virtio_has_feature(vdev, VIRTIO_BLK_F_DISCARD)) { > > + q->limits.discard_alignment = blk_size; > > + q->limits.discard_granularity = blk_size; > > + > > + virtio_cread(vdev, struct virtio_blk_config, max_discard_seg, &v); > > + if (v) > > + blk_queue_max_discard_sectors(q, v); > > + else > > + blk_queue_max_discard_sectors(q, -1U); > > + > > + virtio_cread(vdev, struct virtio_blk_config, max_discard_num, &v); > > + if (v) > > + blk_queue_max_discard_segments(q, v); > > + else > > + blk_queue_max_discard_segments(q, 256); > > + > > + queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); > > + } > > + > > virtio_device_ready(vdev); > > > > device_add_disk(&vdev->dev, vblk->disk); > > @@ -874,14 +944,14 @@ static int virtblk_restore(struct virtio_device *vdev) > > VIRTIO_BLK_F_SCSI, > > #endif > > VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY, > VIRTIO_BLK_F_CONFIG_WCE, > > - VIRTIO_BLK_F_MQ, > > + VIRTIO_BLK_F_MQ, VIRTIO_BLK_F_DISCARD, > > } > > ; > > static unsigned int features[] = { > > VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, > VIRTIO_BLK_F_GEOMETRY, > > VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE, > > VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY, > VIRTIO_BLK_F_CONFIG_WCE, > > - VIRTIO_BLK_F_MQ, > > + VIRTIO_BLK_F_MQ, VIRTIO_BLK_F_DISCARD, > > }; > > > > static struct virtio_driver virtio_blk = { > > diff --git a/include/uapi/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h > > index 9ebe4d9..3354cc3 100644 > > --- a/include/uapi/linux/virtio_blk.h > > +++ b/include/uapi/linux/virtio_blk.h > > @@ -38,6 +38,7 @@ > > #define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/ > > #define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is > available */ > > #define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ > > +#define VIRTIO_BLK_F_DISCARD 13 /* DISCARD command is > supported */ > > > > /* Legacy feature bits */ > > #ifndef VIRTIO_BLK_NO_LEGACY > > @@ -86,6 +87,10 @@ struct virtio_blk_config { > > > > /* number of vqs, only available when VIRTIO_BLK_F_MQ is set */ > > __u16 num_queues; > > + /* The maximum segment size (if VIRTIO_BLK_F_DISCARD) */ > > + __u32 max_discard_seg; > > + /* The maximum number of segments (if VIRTIO_BLK_F_DISCARD) */ > > + __u32 max_discard_num; > > } __attribute__((packed)); > > > > /* > > @@ -114,6 +119,9 @@ struct virtio_blk_config { > > /* Get device ID command */ > > #define VIRTIO_BLK_T_GET_ID 8 > > > > +/* Discard command */ > > +#define VIRTIO_BLK_T_DISCARD 16 > > + > > #ifndef VIRTIO_BLK_NO_LEGACY > > /* Barrier before this op. */ > > #define VIRTIO_BLK_T_BARRIER 0x80000000 > > @@ -133,6 +141,17 @@ struct virtio_blk_outhdr { > > __virtio64 sector; > > }; > > > > +/* > > + * Array of discard ranges for each request. > > + */ > > +struct virtio_blk_discard { > > + /* start discard lba */ > > + __virtio64 slba; > > + /* number of discard sectors */ > > + __virtio32 nlba; > > + __virtio32 reserved; > > +}; > > + > > #ifndef VIRTIO_BLK_NO_LEGACY > > struct virtio_scsi_inhdr { > > __virtio32 errors; > >
Changpeng Liu
2017-Jul-05 08:44 UTC
[PATCH v2] virtio-blk: add DISCARD support to virtio-blk driver
Currently virtio-blk driver does not provide discard feature flag, so the filesystems which built on top of the block device will not send discard command. This is okay for HDD backend, but it will impact the performance for SSD backend. Add a feature flag VIRTIO_BLK_F_DISCARD and command VIRTIO_BLK_T_DISCARD to extend exist virtio-blk protocol, define 16 bytes discard descriptor for each discard segment, the discard segment defination aligns with SCSI or NVM Express protocols, virtio-blk driver will support multi-range discard request as well. Signed-off-by: Changpeng Liu <changpeng.liu at intel.com> --- drivers/block/virtio_blk.c | 76 +++++++++++++++++++++++++++++++++++++++-- include/uapi/linux/virtio_blk.h | 19 +++++++++++ 2 files changed, 92 insertions(+), 3 deletions(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 0297ad7..8f0c614 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -172,10 +172,52 @@ static int virtblk_add_req(struct virtqueue *vq, struct virtblk_req *vbr, return virtqueue_add_sgs(vq, sgs, num_out, num_in, vbr, GFP_ATOMIC); } +static inline int virtblk_setup_discard(struct request *req) +{ + unsigned short segments = blk_rq_nr_discard_segments(req), n = 0; + u32 block_size = queue_logical_block_size(req->q); + struct virtio_blk_discard *range; + struct bio *bio; + + if (block_size < 512 || !block_size) + return -1; + + range = kmalloc_array(segments, sizeof(*range), GFP_ATOMIC); + if (!range) + return -1; + + __rq_for_each_bio(bio, req) { + u64 slba = (bio->bi_iter.bi_sector << 9) / block_size; + u32 nlb = bio->bi_iter.bi_size / block_size; + + range[n].reserved = cpu_to_le32(0); + range[n].nlba = cpu_to_le32(nlb); + range[n].slba = cpu_to_le64(slba); + n++; + } + + if (WARN_ON_ONCE(n != segments)) { + kfree(range); + return -1; + } + + req->special_vec.bv_page = virt_to_page(range); + req->special_vec.bv_offset = offset_in_page(range); + req->special_vec.bv_len = sizeof(*range) * segments; + req->rq_flags |= RQF_SPECIAL_PAYLOAD; + + return 0; +} + static inline void virtblk_request_done(struct request *req) { struct virtblk_req *vbr = blk_mq_rq_to_pdu(req); + if (req->rq_flags & RQF_SPECIAL_PAYLOAD) { + kfree(page_address(req->special_vec.bv_page) + + req->special_vec.bv_offset); + } + switch (req_op(req)) { case REQ_OP_SCSI_IN: case REQ_OP_SCSI_OUT: @@ -237,6 +279,9 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx, case REQ_OP_FLUSH: type = VIRTIO_BLK_T_FLUSH; break; + case REQ_OP_DISCARD: + type = VIRTIO_BLK_T_DISCARD; + break; case REQ_OP_SCSI_IN: case REQ_OP_SCSI_OUT: type = VIRTIO_BLK_T_SCSI_CMD; @@ -256,9 +301,15 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx, blk_mq_start_request(req); + if (type == VIRTIO_BLK_T_DISCARD) { + err = virtblk_setup_discard(req); + if (err) + return BLK_STS_IOERR; + } + num = blk_rq_map_sg(hctx->queue, req, vbr->sg); if (num) { - if (rq_data_dir(req) == WRITE) + if (rq_data_dir(req) == WRITE || type == VIRTIO_BLK_T_DISCARD) vbr->out_hdr.type |= cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_OUT); else vbr->out_hdr.type |= cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_IN); @@ -767,6 +818,25 @@ static int virtblk_probe(struct virtio_device *vdev) if (!err && opt_io_size) blk_queue_io_opt(q, blk_size * opt_io_size); + if (virtio_has_feature(vdev, VIRTIO_BLK_F_DISCARD)) { + q->limits.discard_alignment = blk_size; + q->limits.discard_granularity = blk_size; + + virtio_cread(vdev, struct virtio_blk_config, max_discard_seg, &v); + if (v) + blk_queue_max_discard_sectors(q, v); + else + blk_queue_max_discard_sectors(q, -1U); + + virtio_cread(vdev, struct virtio_blk_config, max_discard_num, &v); + if (v) + blk_queue_max_discard_segments(q, v); + else + blk_queue_max_discard_segments(q, 256); + + queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); + } + virtio_device_ready(vdev); device_add_disk(&vdev->dev, vblk->disk); @@ -874,14 +944,14 @@ static int virtblk_restore(struct virtio_device *vdev) VIRTIO_BLK_F_SCSI, #endif VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY, VIRTIO_BLK_F_CONFIG_WCE, - VIRTIO_BLK_F_MQ, + VIRTIO_BLK_F_MQ, VIRTIO_BLK_F_DISCARD, } ; static unsigned int features[] = { VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE, VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY, VIRTIO_BLK_F_CONFIG_WCE, - VIRTIO_BLK_F_MQ, + VIRTIO_BLK_F_MQ, VIRTIO_BLK_F_DISCARD, }; static struct virtio_driver virtio_blk = { diff --git a/include/uapi/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h index 9ebe4d9..3354cc3 100644 --- a/include/uapi/linux/virtio_blk.h +++ b/include/uapi/linux/virtio_blk.h @@ -38,6 +38,7 @@ #define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/ #define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */ #define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ +#define VIRTIO_BLK_F_DISCARD 13 /* DISCARD command is supported */ /* Legacy feature bits */ #ifndef VIRTIO_BLK_NO_LEGACY @@ -86,6 +87,10 @@ struct virtio_blk_config { /* number of vqs, only available when VIRTIO_BLK_F_MQ is set */ __u16 num_queues; + /* The maximum segment size (if VIRTIO_BLK_F_DISCARD) */ + __u32 max_discard_seg; + /* The maximum number of segments (if VIRTIO_BLK_F_DISCARD) */ + __u32 max_discard_num; } __attribute__((packed)); /* @@ -114,6 +119,9 @@ struct virtio_blk_config { /* Get device ID command */ #define VIRTIO_BLK_T_GET_ID 8 +/* Discard command */ +#define VIRTIO_BLK_T_DISCARD 16 + #ifndef VIRTIO_BLK_NO_LEGACY /* Barrier before this op. */ #define VIRTIO_BLK_T_BARRIER 0x80000000 @@ -133,6 +141,17 @@ struct virtio_blk_outhdr { __virtio64 sector; }; +/* + * Array of discard ranges for each request. + */ +struct virtio_blk_discard { + /* start discard lba */ + __virtio64 slba; + /* number of discard sectors */ + __virtio32 nlba; + __virtio32 reserved; +}; + #ifndef VIRTIO_BLK_NO_LEGACY struct virtio_scsi_inhdr { __virtio32 errors; -- 1.9.3
Reasonably Related Threads
- [PATCH v2] virtio-blk: add DISCARD support to virtio-blk driver
- [PATCH v2] virtio-blk: add DISCARD support to virtio-blk driver
- [PATCH v2] virtio-blk: add DISCARD support to virtio-blk driver
- [PATCH v2] virtio-blk: add DISCARD support to virtio-blk driver
- [PATCH v3] virtio_blk: add DISCARD and WRIET ZEROES command support