thr3ads.net - Linux Virtualization - [PATCH v2] virtio_balloon: Convert "vballon" kthread into a workqueue [Nov 2014]

If this information is useful, please help other people find it:
Share via:

Petr Mladek

2014-Nov-12 13:02 UTC

[PATCH v2] virtio_balloon: Convert "vballon" kthread into a workqueue

Workqueues have clean and rich API for all basic operations. The code is usually
easier and better readable. It can be easily tuned for the given purpose.

In many cases, it allows to avoid an extra kernel thread. It helps to stop the
growing number of them.  Also there will be less thread-specific hacks all over
the kernel code.

It forces making the task selfcontained. There is no longer an unclear infinite
loop. This helps to avoid problems with suspend. Also it will be very helpful
for kGraft (kernel live patching).

The conversion is pretty straightforward. The main change is that there is not
longer an "infinite" loop in the balloon() handler. Instead, another
work item
has to be scheduled from fill_balloon() and leak_balloon() when they do not
do all requested changes in a single call.

Changes in v2:

	+ More elegant detection of the pending work in fill_balloon() and
	  leak_ballon(). It still needs to keep the original requested number
	  of pages but it does not add any extra boolean variable.

	+ Remove WQ_MEM_RECLAIM workqueue parameter. If I get it correctly,
	  this is possible because the code manipulates memory but it is not
	  used in the memory reclaim path.

	+ initialize the work item before allocation the workqueue

Signed-off-by: Petr Mladek <pmladek at suse.cz>
---
 drivers/virtio/virtio_balloon.c | 86 +++++++++++++++++++----------------------
 1 file changed, 39 insertions(+), 47 deletions(-)

diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index c9703d4d6f67..5532d1222417 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -22,8 +22,7 @@
 #include <linux/virtio.h>
 #include <linux/virtio_balloon.h>
 #include <linux/swap.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
+#include <linux/workqueue.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -42,11 +41,9 @@ struct virtio_balloon
 	struct virtio_device *vdev;
 	struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
 
-	/* Where the ballooning thread waits for config to change. */
-	wait_queue_head_t config_change;
-
-	/* The thread servicing the balloon. */
-	struct task_struct *thread;
+	/* The workqueue servicing the balloon. */
+	struct workqueue_struct *wq;
+	struct work_struct wq_work;
 
 	/* Waiting for host to ack the pages we released. */
 	wait_queue_head_t acked;
@@ -128,12 +125,13 @@ static void set_page_pfns(u32 pfns[], struct page *page)
 static void fill_balloon(struct virtio_balloon *vb, size_t num)
 {
 	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
+	size_t limit;
 
 	/* We can only do one array worth at a time. */
-	num = min(num, ARRAY_SIZE(vb->pfns));
+	limit = min(num, ARRAY_SIZE(vb->pfns));
 
 	mutex_lock(&vb->balloon_lock);
-	for (vb->num_pfns = 0; vb->num_pfns < num;
+	for (vb->num_pfns = 0; vb->num_pfns < limit;
 	     vb->num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE) {
 		struct page *page = balloon_page_enqueue(vb_dev_info);
 
@@ -153,6 +151,9 @@ static void fill_balloon(struct virtio_balloon *vb, size_t
num)
 	/* Did we get any? */
 	if (vb->num_pfns != 0)
 		tell_host(vb, vb->inflate_vq);
+	/* Do we need to get more? */
+	if (vb->num_pfns < num)
+		queue_work(vb->wq, &vb->wq_work);
 	mutex_unlock(&vb->balloon_lock);
 }
 
@@ -172,12 +173,13 @@ static void leak_balloon(struct virtio_balloon *vb, size_t
num)
 {
 	struct page *page;
 	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
+	size_t limit;
 
 	/* We can only do one array worth at a time. */
-	num = min(num, ARRAY_SIZE(vb->pfns));
+	limit = min(num, ARRAY_SIZE(vb->pfns));
 
 	mutex_lock(&vb->balloon_lock);
-	for (vb->num_pfns = 0; vb->num_pfns < num;
+	for (vb->num_pfns = 0; vb->num_pfns < limit;
 	     vb->num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE) {
 		page = balloon_page_dequeue(vb_dev_info);
 		if (!page)
@@ -193,6 +195,9 @@ static void leak_balloon(struct virtio_balloon *vb, size_t
num)
 	 */
 	if (vb->num_pfns != 0)
 		tell_host(vb, vb->deflate_vq);
+	/* Schedule another call if a bigger change is requested */
+	if (vb->num_pfns < num)
+		queue_work(vb->wq, &vb->wq_work);
 	mutex_unlock(&vb->balloon_lock);
 	release_pages_by_pfn(vb->pfns, vb->num_pfns);
 }
@@ -234,14 +239,14 @@ static void update_balloon_stats(struct virtio_balloon
*vb)
  * with a single buffer.  From that point forward, all conversations consist of
  * a hypervisor request (a call to this function) which directs us to refill
  * the virtqueue with a fresh stats buffer.  Since stats collection can sleep,
- * we notify our kthread which does the actual work via stats_handle_request().
+ * we queue a work that will do the actual work via stats_handle_request().
  */
 static void stats_request(struct virtqueue *vq)
 {
 	struct virtio_balloon *vb = vq->vdev->priv;
 
 	vb->need_stats_update = 1;
-	wake_up(&vb->config_change);
+	queue_work(vb->wq, &vb->wq_work);
 }
 
 static void stats_handle_request(struct virtio_balloon *vb)
@@ -265,7 +270,7 @@ static void virtballoon_changed(struct virtio_device *vdev)
 {
 	struct virtio_balloon *vb = vdev->priv;
 
-	wake_up(&vb->config_change);
+	queue_work(vb->wq, &vb->wq_work);
 }
 
 static inline s64 towards_target(struct virtio_balloon *vb)
@@ -287,35 +292,22 @@ static void update_balloon_size(struct virtio_balloon *vb)
 		      &actual);
 }
 
-static int balloon(void *_vballoon)
+static void balloon(struct work_struct *work)
 {
-	struct virtio_balloon *vb = _vballoon;
-
-	set_freezable();
-	while (!kthread_should_stop()) {
-		s64 diff;
-
-		try_to_freeze();
-		wait_event_interruptible(vb->config_change,
-					 (diff = towards_target(vb)) != 0
-					 || vb->need_stats_update
-					 || kthread_should_stop()
-					 || freezing(current));
-		if (vb->need_stats_update)
-			stats_handle_request(vb);
-		if (diff > 0)
-			fill_balloon(vb, diff);
-		else if (diff < 0)
-			leak_balloon(vb, -diff);
-		update_balloon_size(vb);
+	struct virtio_balloon *vb;
+	s64 diff;
 
-		/*
-		 * For large balloon changes, we could spend a lot of time
-		 * and always have work to do.  Be nice if preempt disabled.
-		 */
-		cond_resched();
-	}
-	return 0;
+	vb = container_of(work, struct virtio_balloon, wq_work);
+	diff = towards_target(vb);
+
+	if (vb->need_stats_update)
+		stats_handle_request(vb);
+
+	if (diff > 0)
+		fill_balloon(vb, diff);
+	else if (diff < 0)
+		leak_balloon(vb, -diff);
+	update_balloon_size(vb);
 }
 
 static int init_vqs(struct virtio_balloon *vb)
@@ -429,7 +421,6 @@ static int virtballoon_probe(struct virtio_device *vdev)
 
 	vb->num_pages = 0;
 	mutex_init(&vb->balloon_lock);
-	init_waitqueue_head(&vb->config_change);
 	init_waitqueue_head(&vb->acked);
 	vb->vdev = vdev;
 	vb->need_stats_update = 0;
@@ -443,9 +434,10 @@ static int virtballoon_probe(struct virtio_device *vdev)
 	if (err)
 		goto out_free_vb;
 
-	vb->thread = kthread_run(balloon, vb, "vballoon");
-	if (IS_ERR(vb->thread)) {
-		err = PTR_ERR(vb->thread);
+	INIT_WORK(&vb->wq_work, balloon);
+	vb->wq = alloc_workqueue("vballoon_wq", WQ_FREEZABLE, 0);
+	if (!vb->wq) {
+		err = -ENOMEM;
 		goto out_del_vqs;
 	}
 
@@ -476,7 +468,7 @@ static void virtballoon_remove(struct virtio_device *vdev)
 {
 	struct virtio_balloon *vb = vdev->priv;
 
-	kthread_stop(vb->thread);
+	destroy_workqueue(vb->wq);
 	remove_common(vb);
 	kfree(vb);
 }
@@ -487,7 +479,7 @@ static int virtballoon_freeze(struct virtio_device *vdev)
 	struct virtio_balloon *vb = vdev->priv;
 
 	/*
-	 * The kthread is already frozen by the PM core before this
+	 * The workqueue is already frozen by the PM core before this
 	 * function is called.
 	 */
 
-- 
1.8.5.2

Michael S. Tsirkin

2014-Nov-12 13:32 UTC

head link

[PATCH v2] virtio_balloon: Convert "vballon" kthread into a workqueue

On Wed, Nov 12, 2014 at 02:02:48PM +0100, Petr Mladek
wrote:> Workqueues have clean and rich API for all basic operations. The code is
usually
> easier and better readable. It can be easily tuned for the given purpose.
> 
> In many cases, it allows to avoid an extra kernel thread. It helps to stop
the
> growing number of them.  Also there will be less thread-specific hacks all
over
> the kernel code.
> 
> It forces making the task selfcontained. There is no longer an unclear
infinite
> loop. This helps to avoid problems with suspend. Also it will be very
helpful
> for kGraft (kernel live patching).
> 
> The conversion is pretty straightforward. The main change is that there is
not
> longer an "infinite" loop in the balloon() handler. Instead,
another work item
> has to be scheduled from fill_balloon() and leak_balloon() when they do not
> do all requested changes in a single call.
> Changes in v2:
> 
> 	+ More elegant detection of the pending work in fill_balloon() and
> 	  leak_ballon(). It still needs to keep the original requested number
> 	  of pages but it does not add any extra boolean variable.
> 
> 	+ Remove WQ_MEM_RECLAIM workqueue parameter. If I get it correctly,
> 	  this is possible because the code manipulates memory but it is not
> 	  used in the memory reclaim path.
> 
> 	+ initialize the work item before allocation the workqueue
> 
changelog should come after ---
> Signed-off-by: Petr Mladek <pmladek at suse.cz>

I suggest a minor change below.
Otherwise looks ok

Acked-by: Michael S. Tsirkin <mst at redhat.com>

> ---
>  drivers/virtio/virtio_balloon.c | 86
+++++++++++++++++++----------------------
>  1 file changed, 39 insertions(+), 47 deletions(-)
> 
> diff --git a/drivers/virtio/virtio_balloon.c
b/drivers/virtio/virtio_balloon.c
> index c9703d4d6f67..5532d1222417 100644
> --- a/drivers/virtio/virtio_balloon.c
> +++ b/drivers/virtio/virtio_balloon.c
> @@ -22,8 +22,7 @@
>  #include <linux/virtio.h>
>  #include <linux/virtio_balloon.h>
>  #include <linux/swap.h>
> -#include <linux/kthread.h>
> -#include <linux/freezer.h>
> +#include <linux/workqueue.h>
>  #include <linux/delay.h>
>  #include <linux/slab.h>
>  #include <linux/module.h>
> @@ -42,11 +41,9 @@ struct virtio_balloon
>  	struct virtio_device *vdev;
>  	struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
>  
> -	/* Where the ballooning thread waits for config to change. */
> -	wait_queue_head_t config_change;
> -
> -	/* The thread servicing the balloon. */
> -	struct task_struct *thread;
> +	/* The workqueue servicing the balloon. */
> +	struct workqueue_struct *wq;
> +	struct work_struct wq_work;
We could use system_freezable_wq instead.
I do agree a dedicated wq is better since this can get blocked
for a long time while allocating memory.
However, please add a comment to this effect.
>  
>  	/* Waiting for host to ack the pages we released. */
>  	wait_queue_head_t acked;
> @@ -128,12 +125,13 @@ static void set_page_pfns(u32 pfns[], struct page
*page)
>  static void fill_balloon(struct virtio_balloon *vb, size_t num)
>  {
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
> +	size_t limit;
>  
>  	/* We can only do one array worth at a time. */
> -	num = min(num, ARRAY_SIZE(vb->pfns));
> +	limit = min(num, ARRAY_SIZE(vb->pfns));
>  
>  	mutex_lock(&vb->balloon_lock);
> -	for (vb->num_pfns = 0; vb->num_pfns < num;
> +	for (vb->num_pfns = 0; vb->num_pfns < limit;
>  	     vb->num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE) {
>  		struct page *page = balloon_page_enqueue(vb_dev_info);
>  
> @@ -153,6 +151,9 @@ static void fill_balloon(struct virtio_balloon *vb,
size_t num)
>  	/* Did we get any? */
>  	if (vb->num_pfns != 0)
>  		tell_host(vb, vb->inflate_vq);
> +	/* Do we need to get more? */
> +	if (vb->num_pfns < num)
> +		queue_work(vb->wq, &vb->wq_work);
>  	mutex_unlock(&vb->balloon_lock);
>  }
>  
> @@ -172,12 +173,13 @@ static void leak_balloon(struct virtio_balloon *vb,
size_t num)
>  {
>  	struct page *page;
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
> +	size_t limit;
>  
>  	/* We can only do one array worth at a time. */
> -	num = min(num, ARRAY_SIZE(vb->pfns));
> +	limit = min(num, ARRAY_SIZE(vb->pfns));
>  
>  	mutex_lock(&vb->balloon_lock);
> -	for (vb->num_pfns = 0; vb->num_pfns < num;
> +	for (vb->num_pfns = 0; vb->num_pfns < limit;
>  	     vb->num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE) {
>  		page = balloon_page_dequeue(vb_dev_info);
>  		if (!page)
> @@ -193,6 +195,9 @@ static void leak_balloon(struct virtio_balloon *vb,
size_t num)
>  	 */
>  	if (vb->num_pfns != 0)
>  		tell_host(vb, vb->deflate_vq);
> +	/* Schedule another call if a bigger change is requested */
> +	if (vb->num_pfns < num)
> +		queue_work(vb->wq, &vb->wq_work);
>  	mutex_unlock(&vb->balloon_lock);
>  	release_pages_by_pfn(vb->pfns, vb->num_pfns);
>  }
> @@ -234,14 +239,14 @@ static void update_balloon_stats(struct
virtio_balloon *vb)
>   * with a single buffer.  From that point forward, all conversations
consist of
>   * a hypervisor request (a call to this function) which directs us to
refill
>   * the virtqueue with a fresh stats buffer.  Since stats collection can
sleep,
> - * we notify our kthread which does the actual work via
stats_handle_request().
> + * we queue a work that will do the actual work via
stats_handle_request().
>   */
>  static void stats_request(struct virtqueue *vq)
>  {
>  	struct virtio_balloon *vb = vq->vdev->priv;
>  
>  	vb->need_stats_update = 1;
> -	wake_up(&vb->config_change);
> +	queue_work(vb->wq, &vb->wq_work);
>  }
>  
>  static void stats_handle_request(struct virtio_balloon *vb)
> @@ -265,7 +270,7 @@ static void virtballoon_changed(struct virtio_device
*vdev)
>  {
>  	struct virtio_balloon *vb = vdev->priv;
>  
> -	wake_up(&vb->config_change);
> +	queue_work(vb->wq, &vb->wq_work);
>  }
>  
>  static inline s64 towards_target(struct virtio_balloon *vb)
> @@ -287,35 +292,22 @@ static void update_balloon_size(struct virtio_balloon
*vb)
>  		      &actual);
>  }
>  
> -static int balloon(void *_vballoon)
> +static void balloon(struct work_struct *work)
>  {
> -	struct virtio_balloon *vb = _vballoon;
> -
> -	set_freezable();
> -	while (!kthread_should_stop()) {
> -		s64 diff;
> -
> -		try_to_freeze();
> -		wait_event_interruptible(vb->config_change,
> -					 (diff = towards_target(vb)) != 0
> -					 || vb->need_stats_update
> -					 || kthread_should_stop()
> -					 || freezing(current));
> -		if (vb->need_stats_update)
> -			stats_handle_request(vb);
> -		if (diff > 0)
> -			fill_balloon(vb, diff);
> -		else if (diff < 0)
> -			leak_balloon(vb, -diff);
> -		update_balloon_size(vb);
> +	struct virtio_balloon *vb;
> +	s64 diff;
>  
> -		/*
> -		 * For large balloon changes, we could spend a lot of time
> -		 * and always have work to do.  Be nice if preempt disabled.
> -		 */
> -		cond_resched();
> -	}
> -	return 0;
> +	vb = container_of(work, struct virtio_balloon, wq_work);
> +	diff = towards_target(vb);
> +
> +	if (vb->need_stats_update)
> +		stats_handle_request(vb);
> +
> +	if (diff > 0)
> +		fill_balloon(vb, diff);
> +	else if (diff < 0)
> +		leak_balloon(vb, -diff);
> +	update_balloon_size(vb);
>  }
>  
>  static int init_vqs(struct virtio_balloon *vb)
> @@ -429,7 +421,6 @@ static int virtballoon_probe(struct virtio_device
*vdev)
>  
>  	vb->num_pages = 0;
>  	mutex_init(&vb->balloon_lock);
> -	init_waitqueue_head(&vb->config_change);
>  	init_waitqueue_head(&vb->acked);
>  	vb->vdev = vdev;
>  	vb->need_stats_update = 0;
> @@ -443,9 +434,10 @@ static int virtballoon_probe(struct virtio_device
*vdev)
>  	if (err)
>  		goto out_free_vb;
>  
> -	vb->thread = kthread_run(balloon, vb, "vballoon");
> -	if (IS_ERR(vb->thread)) {
> -		err = PTR_ERR(vb->thread);
> +	INIT_WORK(&vb->wq_work, balloon);
> +	vb->wq = alloc_workqueue("vballoon_wq", WQ_FREEZABLE, 0);
> +	if (!vb->wq) {
> +		err = -ENOMEM;
>  		goto out_del_vqs;
>  	}
>  
> @@ -476,7 +468,7 @@ static void virtballoon_remove(struct virtio_device
*vdev)
>  {
>  	struct virtio_balloon *vb = vdev->priv;
>  
> -	kthread_stop(vb->thread);
> +	destroy_workqueue(vb->wq);
>  	remove_common(vb);
>  	kfree(vb);
>  }
> @@ -487,7 +479,7 @@ static int virtballoon_freeze(struct virtio_device
*vdev)
>  	struct virtio_balloon *vb = vdev->priv;
>  
>  	/*
> -	 * The kthread is already frozen by the PM core before this
> +	 * The workqueue is already frozen by the PM core before this
>  	 * function is called.
>  	 */
>  
> -- 
> 1.8.5.2

Jeff Epler

2014-Nov-12 18:50 UTC

head link

[PATCH v2] virtio_balloon: Convert "vballon" kthread into a workqueue

Trivial typo "vballon" should be "vballoon" in subject (and
in changelog,
leak_ballon should be leak_balloon)

Jeff

Tejun Heo

2014-Nov-14 13:19 UTC

head link

[PATCH v2] virtio_balloon: Convert "vballon" kthread into a workqueue

Hello, Michael, Petr.

On Wed, Nov 12, 2014 at 03:32:04PM +0200, Michael S. Tsirkin
wrote:> > +	/* The workqueue servicing the balloon. */
> > +	struct workqueue_struct *wq;
> > +	struct work_struct wq_work;
> 
> We could use system_freezable_wq instead.
> I do agree a dedicated wq is better since this can get blocked
> for a long time while allocating memory.
> However, please add a comment to this effect.
system_freezable_wq should be fine.  Workqueues by default have a
pretty high maximum concurrency level (256).  There's no reason to
create separate workqueues solely for that purpose.

Thanks.

-- 
tejun

Seemingly Similar Threads

Search for more reasonably related threads

Linux Virtualization - Nov 2014 - [PATCH v2] virtio_balloon: Convert "vballon" kthread into a workqueue

[PATCH v2] virtio_balloon: Convert "vballon" kthread into a workqueue

[PATCH v2] virtio_balloon: Convert "vballon" kthread into a workqueue

[PATCH v2] virtio_balloon: Convert "vballon" kthread into a workqueue

[PATCH v2] virtio_balloon: Convert "vballon" kthread into a workqueue

Seemingly Similar Threads