thr3ads.net - Linux Virtualization - [virtio-dev] Re: [PATCH v2 0/4] virtio: Clean up scatterlists and use the DMA API [Aug 2014]

If this information is useful, please help other people find it:
Share via:

Andy Lutomirski

2014-Aug-28 18:06 UTC

[PATCH v2 0/4] virtio: Clean up scatterlists and use the DMA API

On Thu, Aug 28, 2014 at 12:44 AM, Christian Borntraeger
<borntraeger at de.ibm.com> wrote:> On 27/08/14 23:50, Andy Lutomirski wrote:
>> This fixes virtio on Xen guests as well as on any other platform
>> that uses virtio_pci on which physical addresses don't match bus
>> addresses.
>>
>> This can be tested with:
>>
>>     virtme-run --xen xen --kimg arch/x86/boot/bzImage --console
>>
>> using virtme from here:
>>
>>     https://git.kernel.org/cgit/utils/kernel/virtme/virtme.git
>>
>> Without these patches, the guest hangs forever.  With these patches,
>> everything works.
>>
>> This should be safe on all platforms that I'm aware of.  That
>> doesn't mean that there isn't anything that I missed.
>>
>> Changes from v1:
>>  - Using the DMA API is optional now.  It would be nice to improve the
>>    DMA API to the point that it could be used unconditionally, but s390
>>    proves that we're not there yet.
>>  - Includes patch 4, which fixes DMA debugging warnings from
virtio_net.
>>
>> Andy Lutomirski (4):
>>   virtio_ring: Remove sg_next indirection
>>   virtio_ring: Support DMA APIs if requested
>>   virtio_pci: Use the DMA API for virtqueues
>>   virtio_net: Stop doing DMA from the stack
>>
>>  drivers/lguest/lguest_device.c         |   3 +-
>>  drivers/misc/mic/card/mic_virtio.c     |   2 +-
>>  drivers/net/virtio_net.c               |  53 +++++---
>>  drivers/remoteproc/remoteproc_virtio.c |   4 +-
>>  drivers/s390/kvm/kvm_virtio.c          |   2 +-
>>  drivers/s390/kvm/virtio_ccw.c          |   4 +-
>>  drivers/virtio/virtio_mmio.c           |   5 +-
>>  drivers/virtio/virtio_pci.c            |  35 ++++--
>>  drivers/virtio/virtio_ring.c           | 219
++++++++++++++++++++++++++-------
>>  include/linux/virtio_ring.h            |   1 +
>>  tools/virtio/linux/virtio.h            |   1 +
>>  tools/virtio/virtio_test.c             |   2 +-
>>  tools/virtio/vringh_test.c             |   3 +-
>>  13 files changed, 253 insertions(+), 81 deletions(-)
>>
>
> Patches were applied on top of 3.16.
>
> block seems to work, with net a simple ping works, iperf causes this:
I neither see the bug, nor can I reproduce it on x86_64 on KVM.  I
doubt that dma vs. non-dma is relevant.  I tried -net user a -net tap
with iperf running in both directions.  I also tried switching
virtio_pci into non-DMA-API mode.  No errors.

Is there any chance that you could instrument that BUG_ON to print n,
i, in_sgs, out_sgs, total_sg, total_in, and total_out?  I assume this
is some oddity with patch 1, but I'm mystified.

Thanks,
Andy
>
> [    8.643981] ------------[ cut here ]------------
> [    8.643986] kernel BUG at drivers/virtio/virtio_ring.c:245!
> [    8.644036] illegal operation: 0001 [#1] SMP
> [    8.644039] Modules linked in: virtio_net virtio_blk dm_multipath sunrpc
> [    8.644046] CPU: 0 PID: 1291 Comm: iperf Not tainted 3.16.0+ #130
> [    8.644048] task: 00000000018ee4c0 ti: 0000000022098000 task.ti:
0000000022098000
> [    8.644051] Krnl PSW : 0704d00180000000 0000000000421618
(virtqueue_add_outbuf+0x2e4/0x340)
> [    8.644066]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1
PM:0 EA:3
> Krnl GPRS: 00000000299f8a80 0000000000000000 0000000000000001
000003d100000000
> [    8.644070]            00000000004214de 0000000000000e2c
0000000000000001 0000000000000002
> [    8.644072]            00000000299f8a40 0000000000000001
00000000299f8a40 0000000000000000
> [    8.644074]            0000000028077608 00000000287ec000
0000000000421548 000000002209b7b0
> [    8.644085] Krnl Code: 000000000042160a: d060a7a90000        trtr   
1961(97,%r10),0
>            0000000000421610: a7f4ff07           brc     15,42141e
>           #0000000000421614: a7f40001           brc     15,421616
>           >0000000000421618: a7c8fffb           lhi     %r12,-5
>            000000000042161c: a7f4ff46           brc     15,4214a8
>            0000000000421620: a7f40001           brc     15,421622
>            0000000000421624: b9040021           lgr     %r2,%r1
>            0000000000421628: c030001c3569       larl    %r3,7a80fa
> [    8.644106] Call Trace:
> [    8.644110] ([<00000000004214de>]
virtqueue_add_outbuf+0x1aa/0x340)
> [    8.644114]  [<000003ff80174466>] start_xmit+0x1e6/0x49c
[virtio_net]
> [    8.644119]  [<000000000050571a>] dev_hard_start_xmit+0x346/0x600
> [    8.644123]  [<000000000052a43c>] sch_direct_xmit+0xe8/0x1e8
> [    8.644126]  [<0000000000505be8>] __dev_queue_xmit+0x214/0x4ec
> [    8.644131]  [<000000000054a476>] ip_finish_output+0x436/0x90c
> [    8.644134]  [<000000000054b7c0>] ip_queue_xmit+0x170/0x3e8
> [    8.644137]  [<00000000005636ca>] tcp_transmit_skb+0x462/0x984
> [    8.644140]  [<0000000000564870>] tcp_write_xmit+0x220/0xd0c
> [    8.644143]  [<00000000005653a2>] tcp_push_one+0x46/0x58
> [    8.644145]  [<00000000005568b4>] tcp_sendmsg+0xb7c/0xc9c
> [    8.644148]  [<00000000004e7514>] sock_aio_write+0x12c/0x158
> [    8.644153]  [<000000000027033c>] do_sync_write+0x80/0xc8
> [    8.644156]  [<0000000000271444>] vfs_write+0x144/0x1d8
> [    8.644158]  [<000000000027192a>] SyS_write+0x62/0xd0
> [    8.644163]  [<000000000062781c>] sysc_tracego+0x14/0x1a
> [    8.644170]  [<000003fffd51203c>] 0x3fffd51203c
> [    8.644171] Last Breaking-Event-Address:
> [    8.644174]  [<0000000000421614>] virtqueue_add_outbuf+0x2e0/0x340
>


-- 
Andy Lutomirski
AMA Capital Management, LLC

Christian Borntraeger

2014-Aug-28 18:29 UTC

head link

[PATCH v2 0/4] virtio: Clean up scatterlists and use the DMA API

On 28/08/14 20:06, Andy Lutomirski wrote:
[...]>> block seems to work, with net a simple ping works, iperf causes this:
> 
> I neither see the bug, nor can I reproduce it on x86_64 on KVM.  I
> doubt that dma vs. non-dma is relevant.  I tried -net user a -net tap
> with iperf running in both directions.  I also tried switching
> virtio_pci into non-DMA-API mode.  No errors.
> 
> Is there any chance that you could instrument that BUG_ON to print n,
> i, in_sgs, out_sgs, total_sg, total_in, and total_out?  I assume this
> is some oddity with patch 1, but I'm mystified.
Yes, its triggered by patch 1.> 
> Thanks,
> Andy
> 
>>
>> [    8.643981] ------------[ cut here ]------------
>> [    8.643986] kernel BUG at drivers/virtio/virtio_ring.c:245!
>> [    8.644036] illegal operation: 0001 [#1] SMP
>> [    8.644039] Modules linked in: virtio_net virtio_blk dm_multipath
sunrpc
>> [    8.644046] CPU: 0 PID: 1291 Comm: iperf Not tainted 3.16.0+ #130
>> [    8.644048] task: 00000000018ee4c0 ti: 0000000022098000 task.ti:
0000000022098000
>> [    8.644051] Krnl PSW : 0704d00180000000 0000000000421618
(virtqueue_add_outbuf+0x2e4/0x340)
>> [    8.644066]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1
PM:0 EA:3
>> Krnl GPRS: 00000000299f8a80 0000000000000000 0000000000000001
000003d100000000
>> [    8.644070]            00000000004214de 0000000000000e2c
0000000000000001 0000000000000002
>> [    8.644072]            00000000299f8a40 0000000000000001
00000000299f8a40 0000000000000000
>> [    8.644074]            0000000028077608 00000000287ec000
0000000000421548 000000002209b7b0
>> [    8.644085] Krnl Code: 000000000042160a: d060a7a90000        trtr   
1961(97,%r10),0
>>            0000000000421610: a7f4ff07           brc     15,42141e
>>           #0000000000421614: a7f40001           brc     15,421616
>>           >0000000000421618: a7c8fffb           lhi     %r12,-5
>>            000000000042161c: a7f4ff46           brc     15,4214a8
>>            0000000000421620: a7f40001           brc     15,421622
>>            0000000000421624: b9040021           lgr     %r2,%r1
>>            0000000000421628: c030001c3569       larl    %r3,7a80fa
>> [    8.644106] Call Trace:
>> [    8.644110] ([<00000000004214de>]
virtqueue_add_outbuf+0x1aa/0x340)
>> [    8.644114]  [<000003ff80174466>] start_xmit+0x1e6/0x49c
[virtio_net]
>> [    8.644119]  [<000000000050571a>]
dev_hard_start_xmit+0x346/0x600
>> [    8.644123]  [<000000000052a43c>] sch_direct_xmit+0xe8/0x1e8
>> [    8.644126]  [<0000000000505be8>] __dev_queue_xmit+0x214/0x4ec
>> [    8.644131]  [<000000000054a476>] ip_finish_output+0x436/0x90c
>> [    8.644134]  [<000000000054b7c0>] ip_queue_xmit+0x170/0x3e8
>> [    8.644137]  [<00000000005636ca>] tcp_transmit_skb+0x462/0x984
>> [    8.644140]  [<0000000000564870>] tcp_write_xmit+0x220/0xd0c
>> [    8.644143]  [<00000000005653a2>] tcp_push_one+0x46/0x58
>> [    8.644145]  [<00000000005568b4>] tcp_sendmsg+0xb7c/0xc9c
>> [    8.644148]  [<00000000004e7514>] sock_aio_write+0x12c/0x158
>> [    8.644153]  [<000000000027033c>] do_sync_write+0x80/0xc8
>> [    8.644156]  [<0000000000271444>] vfs_write+0x144/0x1d8
>> [    8.644158]  [<000000000027192a>] SyS_write+0x62/0xd0
>> [    8.644163]  [<000000000062781c>] sysc_tracego+0x14/0x1a
>> [    8.644170]  [<000003fffd51203c>] 0x3fffd51203c
>> [    8.644171] Last Breaking-Event-Address:
>> [    8.644174]  [<0000000000421614>]
virtqueue_add_outbuf+0x2e0/0x340
>>
> 
> 
>

Andy Lutomirski

2014-Aug-28 18:51 UTC

head link

[PATCH v2 0/4] virtio: Clean up scatterlists and use the DMA API

On Thu, Aug 28, 2014 at 11:29 AM, Christian Borntraeger
<borntraeger at de.ibm.com> wrote:> On 28/08/14 20:06, Andy Lutomirski wrote:
> [...]
>>> block seems to work, with net a simple ping works, iperf causes
this:
>>
>> I neither see the bug, nor can I reproduce it on x86_64 on KVM.  I
>> doubt that dma vs. non-dma is relevant.  I tried -net user a -net tap
>> with iperf running in both directions.  I also tried switching
>> virtio_pci into non-DMA-API mode.  No errors.
>>
>> Is there any chance that you could instrument that BUG_ON to print n,
>> i, in_sgs, out_sgs, total_sg, total_in, and total_out?  I assume this
>> is some oddity with patch 1, but I'm mystified.
>
> Yes, its triggered by patch 1.
I must be doing something wrong, since virtio_net isn't sending me
through that code path at all.  This may be related to ethtool
refusing to enable scatter-gather on my NIC.  This happens on
vhost-net and QEMU's implementation.  Grr.

Can you change the code to something like:

        if (i != total_sg) {
                printk(KERN_ERR "i=%d total_sg=%u total_out=%u total_in=%u
out_\
sgs=%u in_sgs=%u\n",
                       i, total_sg, total_out, total_in, out_sgs, in_sgs);
        }
        BUG_ON(i != total_sg);

and try to capture another oops?

Sorry to ask for debugging help for something that's explicitly
designed not to affect your arch :-/

--Andy

Paolo Bonzini

2014-Aug-28 18:55 UTC

head link

[virtio-dev] Re: [PATCH v2 0/4] virtio: Clean up scatterlists and use the DMA API

Il 28/08/2014 20:29, Christian Borntraeger ha scritto:>>> >> block seems to work, with net a simple ping works, iperf
causes this:
>> > 
>> > I neither see the bug, nor can I reproduce it on x86_64 on KVM.  I
>> > doubt that dma vs. non-dma is relevant.  I tried -net user a -net
tap
>> > with iperf running in both directions.  I also tried switching
>> > virtio_pci into non-DMA-API mode.  No errors.
>> > 
>> > Is there any chance that you could instrument that BUG_ON to print
n,
>> > i, in_sgs, out_sgs, total_sg, total_in, and total_out?  I assume
this
>> > is some oddity with patch 1, but I'm mystified.
> Yes, its triggered by patch 1.
What version of QEMU?  Can you two cat the "features" file in the
virtio-net device's sysfs directory?

Paolo

Seemingly Similar Threads

Search for more reasonably related threads

Linux Virtualization - Aug 2014 - [virtio-dev] Re: [PATCH v2 0/4] virtio: Clean up scatterlists and use the DMA API

[PATCH v2 0/4] virtio: Clean up scatterlists and use the DMA API

[PATCH v2 0/4] virtio: Clean up scatterlists and use the DMA API

[PATCH v2 0/4] virtio: Clean up scatterlists and use the DMA API

[virtio-dev] Re: [PATCH v2 0/4] virtio: Clean up scatterlists and use the DMA API

Seemingly Similar Threads