Linux Virtualization - Sep 2013 - [PATCH V2 2/6] vhost_net: use vhost_add_used_and_signal_n() in vhost_zerocopy_signal_used()

Hi all:

This series tries to unify and simplify vhost codes especially for
zerocopy. With this series, 5% - 10% improvement for per cpu throughput were
seen during netperf guest sending test.

Plase review.

Changes from V1:
- Fix the zerocopy enabling check by changing the check of upend_idx != done_idx
  to (upend_idx + 1) % UIO_MAXIOV == done_idx.
- Switch to use put_user() in __vhost_add_used_n() if there's only one used
- Keep the max pending check based on Michael's suggestion.

Jason Wang (6):
  vhost_net: make vhost_zerocopy_signal_used() returns void
  vhost_net: use vhost_add_used_and_signal_n() in
    vhost_zerocopy_signal_used()
  vhost: switch to use vhost_add_used_n()
  vhost_net: determine whether or not to use zerocopy at one time
  vhost_net: poll vhost queue after marking DMA is done
  vhost_net: correctly limit the max pending buffers

 drivers/vhost/net.c   |   88 +++++++++++++++++++++----------------------------
 drivers/vhost/vhost.c |   54 +++++++-----------------------
 2 files changed, 50 insertions(+), 92 deletions(-)

None of its caller use its return value, so let it return void.

Signed-off-by: Jason Wang <jasowang at redhat.com>
---
 drivers/vhost/net.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 969a859..280ee66 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -276,8 +276,8 @@ static void copy_iovec_hdr(const struct iovec *from, struct
iovec *to,
  * of used idx. Once lower device DMA done contiguously, we will signal KVM
  * guest used idx.
  */
-static int vhost_zerocopy_signal_used(struct vhost_net *net,
-				      struct vhost_virtqueue *vq)
+static void vhost_zerocopy_signal_used(struct vhost_net *net,
+				       struct vhost_virtqueue *vq)
 {
 	struct vhost_net_virtqueue *nvq  		container_of(vq, struct
vhost_net_virtqueue, vq);
@@ -297,7 +297,6 @@ static int vhost_zerocopy_signal_used(struct vhost_net *net,
 	}
 	if (j)
 		nvq->done_idx = i;
-	return j;
 }
 
 static void vhost_zerocopy_callback(struct ubuf_info *ubuf, bool success)
-- 
1.7.1

We tend to batch the used adding and signaling in vhost_zerocopy_callback()
which may result more than 100 used buffers to be updated in
vhost_zerocopy_signal_used() in some cases. So wwitch to use
vhost_add_used_and_signal_n() to avoid multiple calls to
vhost_add_used_and_signal(). Which means much more less times of used index
updating and memory barriers.

Signed-off-by: Jason Wang <jasowang at redhat.com>
---
 drivers/vhost/net.c |   13 ++++++++-----
 1 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 280ee66..8a6dd0d 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -281,7 +281,7 @@ static void vhost_zerocopy_signal_used(struct vhost_net
*net,
 {
 	struct vhost_net_virtqueue *nvq  		container_of(vq, struct
vhost_net_virtqueue, vq);
-	int i;
+	int i, add;
 	int j = 0;
 
 	for (i = nvq->done_idx; i != nvq->upend_idx; i = (i + 1) % UIO_MAXIOV) {
@@ -289,14 +289,17 @@ static void vhost_zerocopy_signal_used(struct vhost_net
*net,
 			vhost_net_tx_err(net);
 		if (VHOST_DMA_IS_DONE(vq->heads[i].len)) {
 			vq->heads[i].len = VHOST_DMA_CLEAR_LEN;
-			vhost_add_used_and_signal(vq->dev, vq,
-						  vq->heads[i].id, 0);
 			++j;
 		} else
 			break;
 	}
-	if (j)
-		nvq->done_idx = i;
+	while (j) {
+		add = min(UIO_MAXIOV - nvq->done_idx, j);
+		vhost_add_used_and_signal_n(vq->dev, vq,
+					    &vq->heads[nvq->done_idx], add);
+		nvq->done_idx = (nvq->done_idx + add) % UIO_MAXIOV;
+		j -= add;
+	}
 }
 
 static void vhost_zerocopy_callback(struct ubuf_info *ubuf, bool success)
-- 
1.7.1

Let vhost_add_used() to use vhost_add_used_n() to reduce the code duplication.

Signed-off-by: Jason Wang <jasowang at redhat.com>
---
 drivers/vhost/vhost.c |   54 ++++++++++--------------------------------------
 1 files changed, 12 insertions(+), 42 deletions(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index e58cf00..124c433 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -1332,48 +1332,9 @@ EXPORT_SYMBOL_GPL(vhost_discard_vq_desc);
  * want to notify the guest, using eventfd. */
 int vhost_add_used(struct vhost_virtqueue *vq, unsigned int head, int len)
 {
-	struct vring_used_elem __user *used;
+	struct vring_used_elem heads = { head, len };
 
-	/* The virtqueue contains a ring of used buffers.  Get a pointer to the
-	 * next entry in that used ring. */
-	used = &vq->used->ring[vq->last_used_idx % vq->num];
-	if (__put_user(head, &used->id)) {
-		vq_err(vq, "Failed to write used id");
-		return -EFAULT;
-	}
-	if (__put_user(len, &used->len)) {
-		vq_err(vq, "Failed to write used len");
-		return -EFAULT;
-	}
-	/* Make sure buffer is written before we update index. */
-	smp_wmb();
-	if (__put_user(vq->last_used_idx + 1, &vq->used->idx)) {
-		vq_err(vq, "Failed to increment used idx");
-		return -EFAULT;
-	}
-	if (unlikely(vq->log_used)) {
-		/* Make sure data is seen before log. */
-		smp_wmb();
-		/* Log used ring entry write. */
-		log_write(vq->log_base,
-			  vq->log_addr +
-			   ((void __user *)used - (void __user *)vq->used),
-			  sizeof *used);
-		/* Log used index update. */
-		log_write(vq->log_base,
-			  vq->log_addr + offsetof(struct vring_used, idx),
-			  sizeof vq->used->idx);
-		if (vq->log_ctx)
-			eventfd_signal(vq->log_ctx, 1);
-	}
-	vq->last_used_idx++;
-	/* If the driver never bothers to signal in a very long while,
-	 * used index might wrap around. If that happens, invalidate
-	 * signalled_used index we stored. TODO: make sure driver
-	 * signals at least once in 2^16 and remove this. */
-	if (unlikely(vq->last_used_idx == vq->signalled_used))
-		vq->signalled_used_valid = false;
-	return 0;
+	return vhost_add_used_n(vq, &heads, 1);
 }
 EXPORT_SYMBOL_GPL(vhost_add_used);
 
@@ -1387,7 +1348,16 @@ static int __vhost_add_used_n(struct vhost_virtqueue *vq,
 
 	start = vq->last_used_idx % vq->num;
 	used = vq->used->ring + start;
-	if (__copy_to_user(used, heads, count * sizeof *used)) {
+	if (count == 1) {
+		if (__put_user(heads[0].id, &used->id)) {
+			vq_err(vq, "Failed to write used id");
+			return -EFAULT;
+		}
+		if (__put_user(heads[0].len, &used->len)) {
+			vq_err(vq, "Failed to write used len");
+			return -EFAULT;
+		}
+	} else if (__copy_to_user(used, heads, count * sizeof *used)) {
 		vq_err(vq, "Failed to write used");
 		return -EFAULT;
 	}
-- 
1.7.1

Currently, even if the packet length is smaller than VHOST_GOODCOPY_LEN, if
upend_idx != done_idx we still set zcopy_used to true and rollback this choice
later. This could be avoided by determine zerocopy once by checking all
conditions at one time before.

Signed-off-by: Jason Wang <jasowang at redhat.com>
---
 drivers/vhost/net.c |   46 +++++++++++++++++++---------------------------
 1 files changed, 19 insertions(+), 27 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 8a6dd0d..ff60c2a 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -404,43 +404,35 @@ static void handle_tx(struct vhost_net *net)
 			       iov_length(nvq->hdr, s), hdr_size);
 			break;
 		}
-		zcopy_used = zcopy && (len >= VHOST_GOODCOPY_LEN ||
-				       nvq->upend_idx != nvq->done_idx);
+
+		zcopy_used = zcopy && len >= VHOST_GOODCOPY_LEN
+			&& (nvq->upend_idx + 1) % UIO_MAXIOV != nvq->done_idx
+			&& vhost_net_tx_select_zcopy(net);
 
 		/* use msg_control to pass vhost zerocopy ubuf info to skb */
 		if (zcopy_used) {
+			struct ubuf_info *ubuf;
+			ubuf = nvq->ubuf_info + nvq->upend_idx;
+
 			vq->heads[nvq->upend_idx].id = head;
-			if (!vhost_net_tx_select_zcopy(net) ||
-			    len < VHOST_GOODCOPY_LEN) {
-				/* copy don't need to wait for DMA done */
-				vq->heads[nvq->upend_idx].len -							VHOST_DMA_DONE_LEN;
-				msg.msg_control = NULL;
-				msg.msg_controllen = 0;
-				ubufs = NULL;
-			} else {
-				struct ubuf_info *ubuf;
-				ubuf = nvq->ubuf_info + nvq->upend_idx;
-
-				vq->heads[nvq->upend_idx].len -					VHOST_DMA_IN_PROGRESS;
-				ubuf->callback = vhost_zerocopy_callback;
-				ubuf->ctx = nvq->ubufs;
-				ubuf->desc = nvq->upend_idx;
-				msg.msg_control = ubuf;
-				msg.msg_controllen = sizeof(ubuf);
-				ubufs = nvq->ubufs;
-				kref_get(&ubufs->kref);
-			}
+			vq->heads[nvq->upend_idx].len = VHOST_DMA_IN_PROGRESS;
+			ubuf->callback = vhost_zerocopy_callback;
+			ubuf->ctx = nvq->ubufs;
+			ubuf->desc = nvq->upend_idx;
+			msg.msg_control = ubuf;
+			msg.msg_controllen = sizeof(ubuf);
+			ubufs = nvq->ubufs;
+			kref_get(&ubufs->kref);
 			nvq->upend_idx = (nvq->upend_idx + 1) % UIO_MAXIOV;
-		} else
+		} else {
 			msg.msg_control = NULL;
+			ubufs = NULL;
+		}
 		/* TODO: Check specific error and bomb out unless ENOBUFS? */
 		err = sock->ops->sendmsg(NULL, sock, &msg, len);
 		if (unlikely(err < 0)) {
 			if (zcopy_used) {
-				if (ubufs)
-					vhost_net_ubuf_put(ubufs);
+				vhost_net_ubuf_put(ubufs);
 				nvq->upend_idx = ((unsigned)nvq->upend_idx - 1)
 					% UIO_MAXIOV;
 			}
-- 
1.7.1

We used to poll vhost queue before making DMA is done, this is racy if vhost
thread were waked up before marking DMA is done which can result the signal to
be missed. Fix this by always poll the vhost thread before DMA is done.

Signed-off-by: Jason Wang <jasowang at redhat.com>
---
 drivers/vhost/net.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index ff60c2a..d09c17c 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -308,6 +308,11 @@ static void vhost_zerocopy_callback(struct ubuf_info *ubuf,
bool success)
 	struct vhost_virtqueue *vq = ubufs->vq;
 	int cnt = atomic_read(&ubufs->kref.refcount);
 
+	/* set len to mark this desc buffers done DMA */
+	vq->heads[ubuf->desc].len = success ?
+		VHOST_DMA_DONE_LEN : VHOST_DMA_FAILED_LEN;
+	vhost_net_ubuf_put(ubufs);
+
 	/*
 	 * Trigger polling thread if guest stopped submitting new buffers:
 	 * in this case, the refcount after decrement will eventually reach 1
@@ -318,10 +323,6 @@ static void vhost_zerocopy_callback(struct ubuf_info *ubuf,
bool success)
 	 */
 	if (cnt <= 2 || !(cnt % 16))
 		vhost_poll_queue(&vq->poll);
-	/* set len to mark this desc buffers done DMA */
-	vq->heads[ubuf->desc].len = success ?
-		VHOST_DMA_DONE_LEN : VHOST_DMA_FAILED_LEN;
-	vhost_net_ubuf_put(ubufs);
 }
 
 /* Expects to be always run from workqueue - which acts as
-- 
1.7.1

As Michael point out, We used to limit the max pending DMAs to get better cache
utilization. But it was not done correctly since it was one done when
there's no
new buffers submitted from guest. Guest can easily exceeds the limitation by
keeping sending packets.

So this patch moves the check into main loop. Tests shows about 5%-10%
improvement on per cpu throughput for guest tx. But a 5% drop on per cpu
transaction rate for a single session TCP_RR.

Signed-off-by: Jason Wang <jasowang at redhat.com>
---
 drivers/vhost/net.c |   15 ++++-----------
 1 files changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index d09c17c..592e1f2 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -363,6 +363,10 @@ static void handle_tx(struct vhost_net *net)
 		if (zcopy)
 			vhost_zerocopy_signal_used(net, vq);
 
+		if ((nvq->upend_idx + vq->num - VHOST_MAX_PEND) % UIO_MAXIOV =+		   
nvq->done_idx)
+			break;
+
 		head = vhost_get_vq_desc(&net->dev, vq, vq->iov,
 					 ARRAY_SIZE(vq->iov),
 					 &out, &in,
@@ -372,17 +376,6 @@ static void handle_tx(struct vhost_net *net)
 			break;
 		/* Nothing new?  Wait for eventfd to tell us they refilled. */
 		if (head == vq->num) {
-			int num_pends;
-
-			/* If more outstanding DMAs, queue the work.
-			 * Handle upend_idx wrap around
-			 */
-			num_pends = likely(nvq->upend_idx >= nvq->done_idx) ?
-				    (nvq->upend_idx - nvq->done_idx) :
-				    (nvq->upend_idx + UIO_MAXIOV -
-				     nvq->done_idx);
-			if (unlikely(num_pends > VHOST_MAX_PEND))
-				break;
 			if (unlikely(vhost_enable_notify(&net->dev, vq))) {
 				vhost_disable_notify(&net->dev, vq);
 				continue;
-- 
1.7.1

On Fri, 2013-08-30 at 12:29 +0800, Jason Wang wrote:
> We used to poll vhost queue before making DMA is done, this is racy if
vhost
> thread were waked up before marking DMA is done which can result the signal
to
> be missed. Fix this by always poll the vhost thread before DMA is done.
Does this bug only exist in net-next or is it older?  Should the fix go
to net and stable branches?

Ben.
> Signed-off-by: Jason Wang <jasowang at redhat.com>
> ---
>  drivers/vhost/net.c |    9 +++++----
>  1 files changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index ff60c2a..d09c17c 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -308,6 +308,11 @@ static void vhost_zerocopy_callback(struct ubuf_info
*ubuf, bool success)
>  	struct vhost_virtqueue *vq = ubufs->vq;
>  	int cnt = atomic_read(&ubufs->kref.refcount);
>  
> +	/* set len to mark this desc buffers done DMA */
> +	vq->heads[ubuf->desc].len = success ?
> +		VHOST_DMA_DONE_LEN : VHOST_DMA_FAILED_LEN;
> +	vhost_net_ubuf_put(ubufs);
> +
>  	/*
>  	 * Trigger polling thread if guest stopped submitting new buffers:
>  	 * in this case, the refcount after decrement will eventually reach 1
> @@ -318,10 +323,6 @@ static void vhost_zerocopy_callback(struct ubuf_info
*ubuf, bool success)
>  	 */
>  	if (cnt <= 2 || !(cnt % 16))
>  		vhost_poll_queue(&vq->poll);
> -	/* set len to mark this desc buffers done DMA */
> -	vq->heads[ubuf->desc].len = success ?
> -		VHOST_DMA_DONE_LEN : VHOST_DMA_FAILED_LEN;
> -	vhost_net_ubuf_put(ubufs);
>  }
>  
>  /* Expects to be always run from workqueue - which acts as
-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Hello.

On 08/30/2013 08:29 AM, Jason Wang wrote:
> Currently, even if the packet length is smaller than VHOST_GOODCOPY_LEN, if
> upend_idx != done_idx we still set zcopy_used to true and rollback this
choice
> later. This could be avoided by determine zerocopy once by checking all
> conditions at one time before.
> Signed-off-by: Jason Wang <jasowang at redhat.com>
> ---
>   drivers/vhost/net.c |   46 +++++++++++++++++++---------------------------
>   1 files changed, 19 insertions(+), 27 deletions(-)
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index 8a6dd0d..ff60c2a 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -404,43 +404,35 @@ static void handle_tx(struct vhost_net *net)
>   			       iov_length(nvq->hdr, s), hdr_size);
>   			break;
>   		}
> -		zcopy_used = zcopy && (len >= VHOST_GOODCOPY_LEN ||
> -				       nvq->upend_idx != nvq->done_idx);
> +
> +		zcopy_used = zcopy && len >= VHOST_GOODCOPY_LEN
> +			&& (nvq->upend_idx + 1) % UIO_MAXIOV != nvq->done_idx
> +			&& vhost_net_tx_select_zcopy(net);
    Could you leave && on a first of two lines, matching the previous
style?
>
>   		/* use msg_control to pass vhost zerocopy ubuf info to skb */
>   		if (zcopy_used) {
> +			struct ubuf_info *ubuf;
> +			ubuf = nvq->ubuf_info + nvq->upend_idx;
> +
>   			vq->heads[nvq->upend_idx].id = head;
[...]
> +			vq->heads[nvq->upend_idx].len = VHOST_DMA_IN_PROGRESS;
> +			ubuf->callback = vhost_zerocopy_callback;
> +			ubuf->ctx = nvq->ubufs;
> +			ubuf->desc = nvq->upend_idx;
> +			msg.msg_control = ubuf;
> +			msg.msg_controllen = sizeof(ubuf);
    'sizeof(ubuf)' where 'ubuf' is a pointer? Are you sure it
shouldn't be
'sizeof(*ubuf)'?

WBR, Sergei

On Fri, Aug 30, 2013 at 12:29:18PM +0800, Jason Wang
wrote:
> We tend to batch the used adding and signaling in vhost_zerocopy_callback()
> which may result more than 100 used buffers to be updated in
> vhost_zerocopy_signal_used() in some cases. So wwitch to use
switch
> vhost_add_used_and_signal_n() to avoid multiple calls to
> vhost_add_used_and_signal(). Which means much more less times of used index
> updating and memory barriers.
pls put info on perf gain in commit log too
> 
> Signed-off-by: Jason Wang <jasowang at redhat.com>
> ---
>  drivers/vhost/net.c |   13 ++++++++-----
>  1 files changed, 8 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index 280ee66..8a6dd0d 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -281,7 +281,7 @@ static void vhost_zerocopy_signal_used(struct vhost_net
*net,
>  {
>  	struct vhost_net_virtqueue *nvq >  		container_of(vq, struct
vhost_net_virtqueue, vq);
> -	int i;
> +	int i, add;
>  	int j = 0;
>  
>  	for (i = nvq->done_idx; i != nvq->upend_idx; i = (i + 1) %
UIO_MAXIOV) {
> @@ -289,14 +289,17 @@ static void vhost_zerocopy_signal_used(struct
vhost_net *net,
>  			vhost_net_tx_err(net);
>  		if (VHOST_DMA_IS_DONE(vq->heads[i].len)) {
>  			vq->heads[i].len = VHOST_DMA_CLEAR_LEN;
> -			vhost_add_used_and_signal(vq->dev, vq,
> -						  vq->heads[i].id, 0);
>  			++j;
>  		} else
>  			break;
>  	}
> -	if (j)
> -		nvq->done_idx = i;
> +	while (j) {
> +		add = min(UIO_MAXIOV - nvq->done_idx, j);
> +		vhost_add_used_and_signal_n(vq->dev, vq,
> +					    &vq->heads[nvq->done_idx], add);
> +		nvq->done_idx = (nvq->done_idx + add) % UIO_MAXIOV;
> +		j -= add;
> +	}
>  }
>  
>  static void vhost_zerocopy_callback(struct ubuf_info *ubuf, bool success)
> -- 
> 1.7.1

tweak subj s/returns/return/

On Fri, Aug 30, 2013 at 12:29:17PM +0800, Jason Wang
wrote:
> None of its caller use its return value, so let it return void.
> 
> Signed-off-by: Jason Wang <jasowang at redhat.com>
> ---
>  drivers/vhost/net.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index 969a859..280ee66 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -276,8 +276,8 @@ static void copy_iovec_hdr(const struct iovec *from,
struct iovec *to,
>   * of used idx. Once lower device DMA done contiguously, we will signal
KVM
>   * guest used idx.
>   */
> -static int vhost_zerocopy_signal_used(struct vhost_net *net,
> -				      struct vhost_virtqueue *vq)
> +static void vhost_zerocopy_signal_used(struct vhost_net *net,
> +				       struct vhost_virtqueue *vq)
>  {
>  	struct vhost_net_virtqueue *nvq >  		container_of(vq, struct
vhost_net_virtqueue, vq);
> @@ -297,7 +297,6 @@ static int vhost_zerocopy_signal_used(struct vhost_net
*net,
>  	}
>  	if (j)
>  		nvq->done_idx = i;
> -	return j;
>  }
>  
>  static void vhost_zerocopy_callback(struct ubuf_info *ubuf, bool success)
> -- 
> 1.7.1

On Fri, Aug 30, 2013 at 12:29:22PM +0800, Jason Wang
wrote:
> As Michael point out, We used to limit the max pending DMAs to get better
cache
> utilization. But it was not done correctly since it was one done when
there's no
> new buffers submitted from guest. Guest can easily exceeds the limitation
by
> keeping sending packets.
> 
> So this patch moves the check into main loop. Tests shows about 5%-10%
> improvement on per cpu throughput for guest tx. But a 5% drop on per cpu
> transaction rate for a single session TCP_RR.
Any explanation for the drop? single session TCP_RR is unlikely to
exceed VHOST_MAX_PEND, correct?
> 
> Signed-off-by: Jason Wang <jasowang at redhat.com>
> ---
>  drivers/vhost/net.c |   15 ++++-----------
>  1 files changed, 4 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index d09c17c..592e1f2 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -363,6 +363,10 @@ static void handle_tx(struct vhost_net *net)
>  		if (zcopy)
>  			vhost_zerocopy_signal_used(net, vq);
>  
> +		if ((nvq->upend_idx + vq->num - VHOST_MAX_PEND) % UIO_MAXIOV =>
+		    nvq->done_idx)
> +			break;
> +
>  		head = vhost_get_vq_desc(&net->dev, vq, vq->iov,
>  					 ARRAY_SIZE(vq->iov),
>  					 &out, &in,
> @@ -372,17 +376,6 @@ static void handle_tx(struct vhost_net *net)
>  			break;
>  		/* Nothing new?  Wait for eventfd to tell us they refilled. */
>  		if (head == vq->num) {
> -			int num_pends;
> -
> -			/* If more outstanding DMAs, queue the work.
> -			 * Handle upend_idx wrap around
> -			 */
> -			num_pends = likely(nvq->upend_idx >= nvq->done_idx) ?
> -				    (nvq->upend_idx - nvq->done_idx) :
> -				    (nvq->upend_idx + UIO_MAXIOV -
> -				     nvq->done_idx);
> -			if (unlikely(num_pends > VHOST_MAX_PEND))
> -				break;
>  			if (unlikely(vhost_enable_notify(&net->dev, vq))) {
>  				vhost_disable_notify(&net->dev, vq);
>  				continue;
> -- 
> 1.7.1

On 2013/8/30 12:29, Jason Wang wrote:
> We used to poll vhost queue before making DMA is done, this is racy if
vhost
> thread were waked up before marking DMA is done which can result the signal
to
> be missed. Fix this by always poll the vhost thread before DMA is done.
>
> Signed-off-by: Jason Wang <jasowang at redhat.com>
> ---
>   drivers/vhost/net.c |    9 +++++----
>   1 files changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index ff60c2a..d09c17c 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -308,6 +308,11 @@ static void vhost_zerocopy_callback(struct ubuf_info
*ubuf, bool success)
>   	struct vhost_virtqueue *vq = ubufs->vq;
>   	int cnt = atomic_read(&ubufs->kref.refcount);
>
> +	/* set len to mark this desc buffers done DMA */
> +	vq->heads[ubuf->desc].len = success ?
> +		VHOST_DMA_DONE_LEN : VHOST_DMA_FAILED_LEN;
> +	vhost_net_ubuf_put(ubufs);
> +
>   	/*
>   	 * Trigger polling thread if guest stopped submitting new buffers:
>   	 * in this case, the refcount after decrement will eventually reach 1
> @@ -318,10 +323,6 @@ static void vhost_zerocopy_callback(struct ubuf_info
*ubuf, bool success)
>   	 */
>   	if (cnt <= 2 || !(cnt % 16))
>   		vhost_poll_queue(&vq->poll);
> -	/* set len to mark this desc buffers done DMA */
> -	vq->heads[ubuf->desc].len = success ?
> -		VHOST_DMA_DONE_LEN : VHOST_DMA_FAILED_LEN;
> -	vhost_net_ubuf_put(ubufs);
>   }
>
>   /* Expects to be always run from workqueue - which acts as
>
with this change, vq would lose protection that provided by ubufs->kref.
if another thread is waiting at vhost_net_ubuf_put_and_wait called by
vhost_net_release, then after vhost_net_ubuf_put, vq would been free
by vhost_net_release soon, vhost_poll_queue(&vq->poll) may cause NULL
pointer Exception.

another question is that vhost_zerocopy_callback is called by kfree_skb,
it may called in different thread context.
vhost_poll_queue is called decided by ubufs->kref.refcount, this may 
cause there isn't any thread call  vhost_poll_queue, but at least one is 
needed. and this cause network break.
We could repeat it by using 8 netperf thread in guest to xmit tcp to its 
host.

I think if using atomic_read to decide while do vhost_poll_queue or not,
at least a spink_lock is needed.