Hi Michael,
Some random high-level comments:
- I had expected this to be available as:
-net raw,ifname=eth2 -net nic,model=virtio
I'd prefer it this way, because it means you can use this mode even
without vhost and it's ties in better with the way all other qemu
networking modes work.
Like the VNET_HDR support, the "detect that there is only one
backend on the vlan, and that it is a raw socket" code will be a
hack until we have command line options that don't involve vlans.
Open question whether we the user should explicitly have to request
vhost acceleration or we use it if it is available. The latter
sounds nice, but it hasn't turned out great for kvm.
- CAP_NET_ADMIN is needed for raw sockets, so for e.g. libvirt I
think we need to be able to support passing the raw socket fd via
the command line and the monitor interface. I don't think we need
that for the vhost fd, it should be safe to allow unprivileged
users access to that, I think.
- I thought this version supports migration, but I don't see where
that is handled in the code?
- You're not using the errors eventfd?
I've taken a first look through the kernel patch, hopefully I'll post
decent comments for that soon, but in the meantime:
- I think /dev/vhost makes more sense - we shouldn't need to add
another character device if we implement kernel backends for other
virtio devices
- I'd really like vhost to support a 'tap' mode, so that we can
still
use a bridge if a NIC isn't available to be assigned. It would
result in this stuff getting much more testing. Options I see:
1) Add tap-like functionality to vhost
2) Add VHOST_NET_SET_TAP
3) Just tell people to set up a tap and bind a raw socket too it
IMHO, (2) makes the most sense - it should be much less exta kernel
code than (1), and it would be much more convenient than (3)
- Distros will need a udev rule to set the device perms to 0666
- Distros will also need some way to have the module loaded if its
not built-in; best I can think of in Fedora is to stick it in
/etc/sysconfig/modules/kvm.modules
What would be nicer is if loading the kvm module could cause vhost
to be loaded. It's nice that vhost can be used without kvm, but I
think if kvm is loaded it's just very convenient to load vhost too.
See also the problems we've cause with needing mkinitrd/dracut
hacks by not having KVM_GUEST require VIRTIO_PCI
On Mon, 2009-08-17 at 15:37 +0300, Michael S. Tsirkin
wrote:> This adds support for vhost-net virtio kernel backend.
> To enable (assuming device eth2):
> 1. enable promisc mode or program guest mac in device eth2
Why can't vhost do this itself?
> 2. disable tso, gso, lro, jumbo frames on the card
> (disabling lro + jumbo frames should be sufficient,
> haven't tested this)
And this.
If we leave that up to the user or the management app, we need to expose
to them what features vhost supports so that they can know in future to
stop disabling them.
> 3. add vhost=eth2 to -net flag
> 4. run with CAP_NET_ADMIN priviledge (e.g. root)
>
> This patch is RFC, but works without issues for me.
>
> It still needs to be split up, tested and benchmarked properly,
> but posting it here in case people want to test drive
> the kernel bits I posted.
>
> Signed-off-by: Michael S. Tsirkin <mst at redhat.com>
> ---
> Makefile.target | 3 +-
> hw/vhost_net.c | 181
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
> hw/vhost_net.h | 30 +++++++++
> hw/virtio-net.c | 32 ++++++++++-
> hw/virtio-pci.c | 40 ++++++++++++
> hw/virtio.c | 19 ------
> hw/virtio.h | 28 ++++++++-
> net.c | 6 ++-
> net.h | 1 +
> qemu-kvm.c | 8 ---
> qemu-kvm.h | 9 +++
> 11 files changed, 324 insertions(+), 33 deletions(-)
> create mode 100644 hw/vhost_net.c
> create mode 100644 hw/vhost_net.h
>
> diff --git a/Makefile.target b/Makefile.target
> index f6d9708..e941a36 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -170,7 +170,8 @@ obj-y = vl.o osdep.o monitor.o pci.o loader.o
isa_mmio.o machine.o \
> gdbstub.o gdbstub-xml.o msix.o ioport.o qemu-config.o
> # virtio has to be here due to weird dependency between PCI and
virtio-net.
> # need to fix this properly
> -obj-y += virtio-blk.o virtio-balloon.o virtio-net.o virtio-console.o
virtio-pci.o
> +obj-y += virtio-blk.o virtio-balloon.o virtio-net.o virtio-console.o
virtio-pci.o \
> + vhost_net.o
> obj-$(CONFIG_KVM) += kvm.o kvm-all.o
>
> LIBS+=-lz
> diff --git a/hw/vhost_net.c b/hw/vhost_net.c
> new file mode 100644
> index 0000000..7d52de0
> --- /dev/null
> +++ b/hw/vhost_net.c
> @@ -0,0 +1,181 @@
> +#include <sys/eventfd.h>
> +#include <sys/socket.h>
> +#include <linux/kvm.h>
> +#include <fcntl.h>
> +#include <sys/ioctl.h>
> +#include <linux/vhost.h>
> +#include <linux/virtio_ring.h>
> +#include <netpacket/packet.h>
> +#include <net/ethernet.h>
> +#include <net/if.h>
> +#include <netinet/in.h>
> +
> +#include <stdio.h>
> +
> +#include "qemu-kvm.h"
> +
> +#include "vhost_net.h"
> +
> +const char *vhost_net_device;
Seems to be unused
> +
> +static int vhost_virtqueue_init(struct vhost_dev *dev,
> + struct VirtIODevice *vdev,
> + struct vhost_virtqueue *vq,
> + struct VirtQueue *q,
> + unsigned idx)
> +{
> + target_phys_addr_t s, l;
> + int r;
> + struct vhost_vring_addr addr = {
> + .index = idx,
> + };
> + struct vhost_vring_file file = {
> + .index = idx,
> + };
> + struct vhost_vring_state size = {
> + .index = idx,
> + };
> +
> + size.num = q->vring.num;
> + r = ioctl(dev->control, VHOST_SET_VRING_NUM, &size);
> + if (r)
> + return -errno;
VHOST_SET_VRING_SIZE is a better name
Also, qemu coding style is:
if (r) {
return -errno;
}
Yes, I hate it too
> +
> + file.fd = vq->kick = eventfd(0, 0);
Handle error
Do we not want CLOEXEC and NONBLOCK ?
> + r = ioctl(dev->control, VHOST_SET_VRING_KICK, &file);
> + if (r)
> + return -errno;
> + file.fd = vq->call = eventfd(0, 0);
> + r = ioctl(dev->control, VHOST_SET_VRING_CALL, &file);
> + if (r)
> + return -errno;
> +
> + s = l = sizeof(struct vring_desc) * q->vring.num;
> + vq->desc = cpu_physical_memory_map(q->vring.desc, &l, 0);
> + if (!vq->desc || l != s)
> + return -ENOMEM;
> + addr.user_addr = (u_int64_t)(unsigned long)vq->desc;
Easier to read if it was re-factored to:
vq->desc = vhost_map(q->vring.desc,
sizeof(struct vring_desc) * q->vring.num,
&addr.user_addr);
if (!vq->desc)
return -ENOMEM;
> + r = ioctl(dev->control, VHOST_SET_VRING_DESC, &addr);
> + if (r < 0)
> + return -errno;
> + s = l = offsetof(struct vring_avail, ring) +
> + sizeof(u_int64_t) * q->vring.num;
> + vq->avail = cpu_physical_memory_map(q->vring.avail, &l, 0);
> + if (!vq->avail || l != s)
> + return -ENOMEM;
> + addr.user_addr = (u_int64_t)(unsigned long)vq->avail;
And re-used here
> + r = ioctl(dev->control, VHOST_SET_VRING_AVAIL, &addr);
> + if (r < 0)
> + return -errno;
> + s = l = offsetof(struct vring_used, ring) +
> + sizeof(struct vring_used_elem) * q->vring.num;
> + vq->used = cpu_physical_memory_map(q->vring.used, &l, 1);
> + if (!vq->used || l != s)
> + return -ENOMEM;
> + addr.user_addr = (u_int64_t)(unsigned long)vq->used;
and here
Need to unmap these too at some point
> + r = ioctl(dev->control, VHOST_SET_VRING_USED, &addr);
> + if (r < 0)
> + return -errno;
> +
> + r = vdev->binding->irqfd(vdev->binding_opaque,
q->vector, vq->call);
> + if (r < 0)
> + return -errno;
> +
> + r = vdev->binding->queuefd(vdev->binding_opaque, idx,
vq->kick);
> + if (r < 0)
> + return -errno;
Naming is a little confused here too
kick vs. call
irqfd vs. queuefd
irqfd vs. ioeventfd
How about just keeping it simple, sticking with the latter and making it
VHOST_SET_VRING_IRQFD and VHOST_SET_VRING_IOEVENTFD ?
> +
> + return 0;
> +}
> +
> +static int vhost_dev_init(struct vhost_dev *hdev,
> + VirtIODevice *vdev)
> +{
> + int i, r, n = 0;
> + struct vhost_memory *mem;
> + hdev->control = open("/dev/vhost-net", O_RDWR);
> + if (hdev->control < 0)
> + return -errno;
> + r = ioctl(hdev->control, VHOST_SET_OWNER, NULL);
> + if (r < 0)
> + return -errno;
Should close the fd if we fail here or later
(Yep, I know you exit on error but ...)
> + for (i = 0; i < KVM_MAX_NUM_MEM_REGIONS; ++i) {
> + if (!slots[i].len || (slots[i].flags & KVM_MEM_LOG_DIRTY_PAGES)) {
> + continue;
> + }
> + ++n;
> + }
I don't love making a "slots" variable global, it'd be nicer
to have:
slots = kvm_get_slots(&n_slots);
naming confusion here between "slots" and "regions" too
Also, max regions is 32, so I'd just allocate max regions and if some
are unused it's no big deal
> + mem = qemu_mallocz(offsetof(struct vhost_memory, regions) +
sizeof(*mem) would suffice here
> + n * sizeof(struct vhost_memory_region));
> + if (!mem)
> + return -ENOMEM;
> + mem->nregions = n;
> + n = 0;
> + for (i = 0; i < KVM_MAX_NUM_MEM_REGIONS; ++i) {
> + if (!slots[i].len || (slots[i].flags & KVM_MEM_LOG_DIRTY_PAGES)) {
> + continue;
> + }
Ignoring the LOG_DIRTY_PAGES regions could do with an explanatory
comment
> + mem->regions[n].guest_phys_addr = slots[i].phys_addr;
> + mem->regions[n].memory_size = slots[i].len;
> + mem->regions[n].userspace_addr = slots[i].userspace_addr;
> + ++n;
> + }
> +
> + r = ioctl(hdev->control, VHOST_SET_MEM_TABLE, mem);
> + if (r < 0)
> + return -errno;
Need to free the table (on error too)
> +
> + for (i = 0; i < hdev->nvqs; ++i) {
> + r = vhost_virtqueue_init(hdev,
> + vdev,
> + hdev->vqs + i,
> + vdev->vq + i,
> + i);
> + if (r < 0)
> + return r;
Need to handle errors better, e.g. unmapping
> + }
> +
> + return 0;
> +}
> +
> +int vhost_net_init(struct vhost_net *net,
> + VirtIODevice *dev,
> + char *vhost_device)
const char *vhost_device
> +{
> + struct sockaddr_ll lladdr;
> + struct ifreq req;
> + int r;
> + const char *ifname = vhost_device;
> + if (!ifname)
> + return 0;
Why the ifname variable?
> + net->dev.nvqs = 2;
> + net->dev.vqs = net->vqs;
> + r = vhost_dev_init(&net->dev, dev);
> + if (r < 0)
> + return r;
> +
> + net->sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
> + if (net->sock < 0)
> + return -errno;
> +
> + memset(&req, 0, sizeof(req));
> + strncpy(req.ifr_name, ifname, IFNAMSIZ-1);
> + r = ioctl(net->sock, SIOCGIFINDEX, &req);
> + if (r < 0)
> + return -errno;
> +
> + memset(&lladdr, 0, sizeof(lladdr));
> + lladdr.sll_family = AF_PACKET;
> + lladdr.sll_protocol = htons(ETH_P_ALL);
> + lladdr.sll_ifindex = req.ifr_ifindex;
> + r = bind(net->sock, (const struct sockaddr *)&lladdr,
sizeof(lladdr));
> + if (r < 0)
> + return -errno;
You've get the point at this stage, but need to close the socket here on
error too
> + r = ioctl(net->dev.control, VHOST_NET_SET_SOCKET, &net->sock);
> + if (r < 0)
> + return -errno;
> + return 0;
> +}
> diff --git a/hw/vhost_net.h b/hw/vhost_net.h
> new file mode 100644
> index 0000000..73e0a76
> --- /dev/null
> +++ b/hw/vhost_net.h
> @@ -0,0 +1,30 @@
> +#ifndef VHOST_NET_H
> +#define VHOST_NET_H
> +
> +#include "hw/virtio.h"
> +
> +struct vhost_virtqueue {
> + int kick;
> + int call;
> + void *desc;
> + void *avail;
> + void *used;
> +};
> +
> +struct vhost_dev {
> + int control;
> + struct vhost_virtqueue *vqs;
> + int nvqs;
> +};
> +
> +struct vhost_net {
> + struct vhost_dev dev;
> + struct vhost_virtqueue vqs[2];
> + int sock;
> +};
I think I'd just malloc the vqs - having two vqs pointers in the two
structs is a little confusing. Maybe it's worth it, though
> +int vhost_net_init(struct vhost_net *net,
> + VirtIODevice *dev,
> + char *vhost_device);
> +
> +#endif
> diff --git a/hw/virtio-net.c b/hw/virtio-net.c
> index 469c6e3..1ac05a2 100644
> --- a/hw/virtio-net.c
> +++ b/hw/virtio-net.c
> @@ -19,6 +19,8 @@
> #include "qemu-kvm.h"
> #endif
>
> +#include "vhost_net.h"
> +
> #define TAP_VNET_HDR
>
> #define VIRTIO_NET_VM_VERSION 10
> @@ -56,6 +58,8 @@ typedef struct VirtIONet
> uint8_t *macs;
> } mac_table;
> uint32_t *vlans;
> + char *vhost_device;
> + struct vhost_net vhost;
> } VirtIONet;
>
> /* TODO
> @@ -134,9 +138,12 @@ static uint32_t virtio_net_get_features(VirtIODevice
*vdev)
> (1 << VIRTIO_NET_F_CTRL_RX) |
> (1 << VIRTIO_NET_F_CTRL_VLAN) |
> (1 << VIRTIO_NET_F_CTRL_RX_EXTRA);
> + VirtIONet *n = to_virtio_net(vdev);
> +
> + if (n->vhost_device)
> + return 1 << VIRTIO_NET_F_MAC;
features = MAC;
if (n->vhost_device)
return features;
features |= ...;
> #ifdef TAP_VNET_HDR
> - VirtIONet *n = to_virtio_net(vdev);
> VLANClientState *host = n->vc->vlan->first_client;
>
> if (tap_has_vnet_hdr(host)) {
> @@ -175,6 +182,9 @@ static uint32_t virtio_net_bad_features(VirtIODevice
*vdev)
> static void virtio_net_set_features(VirtIODevice *vdev, uint32_t features)
> {
> VirtIONet *n = to_virtio_net(vdev);
> + /* vhost net supports no features */
> + if (n->vhost_device)
> + return;
> #ifdef TAP_VNET_HDR
> VLANClientState *host = n->vc->vlan->first_client;
> #endif
> @@ -351,6 +361,9 @@ static void virtio_net_handle_rx(VirtIODevice *vdev,
VirtQueue *vq)
>
> static int do_virtio_net_can_receive(VirtIONet *n, int bufsize)
> {
> + if (n->vhost_device)
> + return 0;
> +
> if (!virtio_queue_ready(n->rx_vq) ||
> !(n->vdev.status & VIRTIO_CONFIG_S_DRIVER_OK))
> return 0;
> @@ -411,6 +424,7 @@ static int iov_fill(struct iovec *iov, int iovcnt,
const void *buf, int count)
> while (offset < count && i < iovcnt) {
> int len = MIN(iov[i].iov_len, count - offset);
> memcpy(iov[i].iov_base, buf + offset, len);
> +
Spurious
> offset += len;
> i++;
> }
> @@ -610,6 +624,8 @@ static void virtio_net_flush_tx(VirtIONet *n, VirtQueue
*vq)
> #else
> int has_vnet_hdr = 0;
> #endif
> + if (n->vhost_device)
> + return;
>
> if (!(n->vdev.status & VIRTIO_CONFIG_S_DRIVER_OK))
> return;
> @@ -822,6 +838,18 @@ static void virtio_net_cleanup(VLANClientState *vc)
> virtio_cleanup(&n->vdev);
> }
>
> +static void virtio_net_driver_ok(VirtIODevice *vdev)
> +{
> + VirtIONet *n = to_virtio_net(vdev);
> + int r;
> +
> + r = vhost_net_init(&n->vhost, vdev, n->vhost_device);
Might be worth a comment as to why we need to wait until here to setup
vhost; it's not immediately obvious
> + if (r) {
> + fprintf(stderr, "\nvhost_net_init returned %d\n", r);
> + exit(-r);
> + }
I think I'd like us to be able to fallback to normal userspace
virtio-net with raw socket if we can't init vhost
Also, the guest is up and running at this point, right? With a linux
guest, the root filesystem is probably mounted. It's not polite to just
exit at this point if we can't open a raw socket or initialize vhost
> VirtIODevice *virtio_net_init(DeviceState *dev)
> {
> VirtIONet *n;
> @@ -837,6 +865,7 @@ VirtIODevice *virtio_net_init(DeviceState *dev)
> n->vdev.set_features = virtio_net_set_features;
> n->vdev.bad_features = virtio_net_bad_features;
> n->vdev.reset = virtio_net_reset;
> + n->vdev.driver_ok = virtio_net_driver_ok;
> n->rx_vq = virtio_add_queue(&n->vdev, 256,
virtio_net_handle_rx);
> n->tx_vq = virtio_add_queue(&n->vdev, 256,
virtio_net_handle_tx);
> n->ctrl_vq = virtio_add_queue(&n->vdev, 64,
virtio_net_handle_ctrl);
> @@ -863,6 +892,7 @@ VirtIODevice *virtio_net_init(DeviceState *dev)
> n->vdev.nvectors = 3;
> else
> n->vdev.nvectors = dev->nd->nvectors;
> + n->vhost_device = dev->nd->vhost_device;
>
> register_savevm("virtio-net", virtio_net_id++,
VIRTIO_NET_VM_VERSION,
> virtio_net_save, virtio_net_load, n);
> diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
> index ab6e9c4..4b02df3 100644
> --- a/hw/virtio-pci.c
> +++ b/hw/virtio-pci.c
> @@ -15,11 +15,13 @@
>
> #include <inttypes.h>
>
> +#include <linux/kvm.h>
> #include "virtio.h"
> #include "pci.h"
> #include "sysemu.h"
> #include "msix.h"
> #include "net.h"
> +#include "qemu-kvm.h"
>
> /* from Linux's linux/virtio_pci.h */
>
> @@ -199,6 +201,8 @@ static void virtio_ioport_write(void *opaque, uint32_t
addr, uint32_t val)
> vdev->status = val & 0xFF;
> if (vdev->status == 0)
> virtio_pci_reset(proxy);
> + if ((val & VIRTIO_CONFIG_S_DRIVER_OK) && vdev->driver_ok)
> + vdev->driver_ok(vdev);
> break;
> case VIRTIO_MSI_CONFIG_VECTOR:
> msix_vector_unuse(&proxy->pci_dev, vdev->config_vector);
> @@ -365,12 +369,48 @@ static void virtio_write_config(PCIDevice *pci_dev,
uint32_t address,
> msix_write_config(pci_dev, address, val, len);
> }
>
> +static int virtio_pci_irqfd(void * opaque, uint16_t vector, int fd)
> +{
> + VirtIOPCIProxy *proxy = opaque;
> + struct kvm_irqfd call = { };
Does the {}; init do anything?
> + int r;
> +
> + if (vector >= proxy->pci_dev.msix_entries_nr)
> + return -EINVAL;
> + if (!proxy->pci_dev.msix_entry_used[vector])
> + return -ENOENT;
Does this mean if the guest doesn't have MSI support, we exit?
> + call.fd = fd;
> + call.gsi = proxy->pci_dev.msix_irq_entries[vector].gsi;
> + r = kvm_vm_ioctl(kvm_state, KVM_IRQFD, &call);
> + if (r < 0)
> + return r;
> + return 0;
Have you plans to implement a non-kvm mode for this too?
> +}
> +
> +static int virtio_pci_queuefd(void * opaque, int n, int fd)
> +{
> + VirtIOPCIProxy *proxy = opaque;
> + struct kvm_ioeventfd kick = {
> + .datamatch = n,
> + .addr = proxy->addr + VIRTIO_PCI_QUEUE_NOTIFY,
> + .len = 2,
> + .flags = KVM_IOEVENTFD_FLAG_DATAMATCH | KVM_IOEVENTFD_FLAG_PIO,
> + .fd = fd,
> + };
> + int r = kvm_vm_ioctl(kvm_state, KVM_IOEVENTFD, &kick);
> + if (r < 0)
> + return r;
> + return 0;
> +}
> +
> static const VirtIOBindings virtio_pci_bindings = {
> .notify = virtio_pci_notify,
> .save_config = virtio_pci_save_config,
> .load_config = virtio_pci_load_config,
> .save_queue = virtio_pci_save_queue,
> .load_queue = virtio_pci_load_queue,
> + .irqfd = virtio_pci_irqfd,
> + .queuefd = virtio_pci_queuefd,
> };
>
> static void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev,
> diff --git a/hw/virtio.c b/hw/virtio.c
> index 41e7ca2..bf53386 100644
> --- a/hw/virtio.c
> +++ b/hw/virtio.c
> @@ -54,24 +54,6 @@ typedef struct VRingUsed
> VRingUsedElem ring[0];
> } VRingUsed;
>
> -typedef struct VRing
> -{
> - unsigned int num;
> - target_phys_addr_t desc;
> - target_phys_addr_t avail;
> - target_phys_addr_t used;
> -} VRing;
> -
> -struct VirtQueue
> -{
> - VRing vring;
> - target_phys_addr_t pa;
> - uint16_t last_avail_idx;
> - int inuse;
> - uint16_t vector;
> - void (*handle_output)(VirtIODevice *vdev, VirtQueue *vq);
> -};
> -
> #define VIRTIO_PCI_QUEUE_MAX 16
>
> /* virt queue functions */
> @@ -401,7 +383,6 @@ int virtqueue_pop(VirtQueue *vq, VirtQueueElement
*elem)
>
> sg->iov_base = cpu_physical_memory_map(vring_desc_addr(desc_pa,
i),
> &len, is_write);
> -
Spurious
You appear to have a vendetta against whitespace :-)
> if (sg->iov_base == NULL || len != sg->iov_len) {
> fprintf(stderr, "virtio: trying to map MMIO
memory\n");
> exit(1);
> diff --git a/hw/virtio.h b/hw/virtio.h
> index cbf472b..0f49017 100644
> --- a/hw/virtio.h
> +++ b/hw/virtio.h
> @@ -54,15 +54,34 @@
>
> struct VirtQueue;
>
> +typedef struct VRing
> +{
> + unsigned int num;
> + target_phys_addr_t desc;
> + target_phys_addr_t avail;
> + target_phys_addr_t used;
> +} VRing;
> +
> +typedef struct VirtQueue VirtQueue;
> +struct VirtIODevice;
> +typedef struct VirtIODevice VirtIODevice;
> +
> +struct VirtQueue
> +{
> + VRing vring;
> + target_phys_addr_t pa;
> + uint16_t last_avail_idx;
> + int inuse;
> + uint16_t vector;
> + void (*handle_output)(VirtIODevice *vdev, VirtQueue *vq);
> +};
> +
Might be better to add accessors for the bits we need?
> static inline target_phys_addr_t vring_align(target_phys_addr_t addr,
> unsigned long align)
> {
> return (addr + align - 1) & ~(align - 1);
> }
>
> -typedef struct VirtQueue VirtQueue;
> -typedef struct VirtIODevice VirtIODevice;
> -
> #define VIRTQUEUE_MAX_SIZE 1024
>
> typedef struct VirtQueueElement
> @@ -81,6 +100,8 @@ typedef struct {
> void (*save_queue)(void * opaque, int n, QEMUFile *f);
> int (*load_config)(void * opaque, QEMUFile *f);
> int (*load_queue)(void * opaque, int n, QEMUFile *f);
> + int (*irqfd)(void * opaque, uint16_t vector, int fd);
> + int (*queuefd)(void * opaque, int n, int fd);
> } VirtIOBindings;
>
> #define VIRTIO_PCI_QUEUE_MAX 16
> @@ -104,6 +125,7 @@ struct VirtIODevice
> void (*get_config)(VirtIODevice *vdev, uint8_t *config);
> void (*set_config)(VirtIODevice *vdev, const uint8_t *config);
> void (*reset)(VirtIODevice *vdev);
> + void (*driver_ok)(VirtIODevice *vdev);
> VirtQueue *vq;
> const VirtIOBindings *binding;
> void *binding_opaque;
> diff --git a/net.c b/net.c
> index 1e845cf..a919376 100644
> --- a/net.c
> +++ b/net.c
> @@ -2588,7 +2588,8 @@ int net_client_init(Monitor *mon, const char *device,
const char *p)
> }
> if (!strcmp(device, "nic")) {
> static const char * const nic_params[] = {
> - "vlan", "name", "macaddr",
"model", "addr", "id", "vectors", NULL
> + "vlan", "name", "macaddr",
"model", "addr", "id", "vectors",
> + "vhost", NULL
> };
> NICInfo *nd;
> uint8_t *macaddr;
> @@ -2620,6 +2621,9 @@ int net_client_init(Monitor *mon, const char *device,
const char *p)
> goto out;
> }
> }
> + if (get_param_value(buf, sizeof(buf), "vhost", p)) {
> + nd->vhost_device = strdup(buf);
> + }
> if (get_param_value(buf, sizeof(buf), "model", p)) {
> nd->model = strdup(buf);
> }
> diff --git a/net.h b/net.h
> index b172691..dd58e2b 100644
> --- a/net.h
> +++ b/net.h
> @@ -110,6 +110,7 @@ struct NICInfo {
> int used;
> int bootable;
> int nvectors;
> + char *vhost_device;
> };
>
> extern int nb_nics;
> diff --git a/qemu-kvm.c b/qemu-kvm.c
> index b59e403..0bd0b50 100644
> --- a/qemu-kvm.c
> +++ b/qemu-kvm.c
> @@ -136,14 +136,6 @@ static inline void clear_gsi(kvm_context_t kvm,
unsigned int gsi)
> DPRINTF("Invalid GSI %d\n");
> }
>
> -struct slot_info {
> - unsigned long phys_addr;
> - unsigned long len;
> - unsigned long userspace_addr;
> - unsigned flags;
> - int logging_count;
> -};
> -
> struct slot_info slots[KVM_MAX_NUM_MEM_REGIONS];
>
> static void init_slots(void)
> diff --git a/qemu-kvm.h b/qemu-kvm.h
> index 6476e6f..2b6e0b6 100644
> --- a/qemu-kvm.h
> +++ b/qemu-kvm.h
> @@ -1215,6 +1215,15 @@ int kvm_ioctl(KVMState *s, int type, ...);
> int kvm_vm_ioctl(KVMState *s, int type, ...);
> int kvm_check_extension(KVMState *s, unsigned int ext);
>
> +struct slot_info {
> + unsigned long phys_addr;
> + unsigned long len;
> + unsigned long userspace_addr;
> + unsigned flags;
> + int logging_count;
> +};
> +
> +extern struct slot_info slots[KVM_MAX_NUM_MEM_REGIONS];
> #endif
>
> #endif
Cheers,
Mark.