This allows other boot loaders such as the Xen domain builder the
opportunity to extract the ELF file.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: virtualization@lists.linux-foundation.org
---
Documentation/i386/boot.txt | 18 +++++++++++++
arch/x86/boot/Makefile | 14 ++++++++++
arch/x86/boot/compressed/Makefile | 2 +-
arch/x86/boot/compressed/misc.c | 49 +++++++++++++++++++++++++++++++++++++
arch/x86/boot/header.S | 6 ++++
5 files changed, 88 insertions(+), 1 deletions(-)
diff --git a/Documentation/i386/boot.txt b/Documentation/i386/boot.txt
index fc49b79..b5f5ba1 100644
--- a/Documentation/i386/boot.txt
+++ b/Documentation/i386/boot.txt
@@ -170,6 +170,8 @@ Offset Proto Name Meaning
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
023C/4 2.07+ hardware_subarch Hardware subarchitecture
0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data
+0248/4 2.08+ compressed_payload_offset
+024C/4 2.08+ compressed_payload_length
(1) For backwards compatibility, if the setup_sects field contains 0, the
real value is 4.
@@ -512,6 +514,22 @@ Protocol: 2.07+
A pointer to data that is specific to hardware subarch
+Field name: compressed_payload_offset
+Type: read
+Offset/size: 0x248/4
+Protocol: 2.08+
+
+ If non-zero then this field contains the offset from the end of the
+ real-mode code to the compressed payload. The compression format
+ should be determined using the standard magic number, currently only
+ gzip is used.
+
+Field name: compressed_payload_length
+Type: read
+Offset/size: 0x24c/4
+Protocol: 2.08+
+
+ The length of the compressed payload.
**** THE KERNEL COMMAND LINE
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 254a583..0c629dc 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -86,6 +86,20 @@ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
+sed-offsets := -e 's/^00*/0/' \
+ -e 's/^\([0-9a-fA-F]*\) . \(input_data\|input_data_end\)$$/\#define
\2 0x\1/p'
+
+quiet_cmd_offsets = OFFSETS $@
+ cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@
+
+$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,offsets)
+
+targets += offsets.h
+
+AFLAGS_header.o += -I$(obj)
+$(obj)/header.o: $(obj)/offsets.h
+
LDFLAGS_setup.elf := -T
$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
$(call if_changed,ld)
diff --git a/arch/x86/boot/compressed/Makefile
b/arch/x86/boot/compressed/Makefile
index d2b9f3b..92fdd35 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -22,7 +22,7 @@ $(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds
$(obj)/head_$(BITS).o $(obj)/misc.o $
$(call if_changed,ld)
@:
-OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
+OBJCOPYFLAGS_vmlinux.bin := -R .comment -S
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 8182e32..8a5daf5 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -15,6 +15,10 @@
* we just keep it from happening
*/
#undef CONFIG_PARAVIRT
+#ifdef CONFIG_X86_32
+#define _ASM_DESC_H_ 1
+#endif
+
#ifdef CONFIG_X86_64
#define _LINUX_STRING_H_ 1
#define __LINUX_BITMAP_H 1
@@ -22,6 +26,7 @@
#include <linux/linkage.h>
#include <linux/screen_info.h>
+#include <linux/elf.h>
#include <asm/io.h>
#include <asm/page.h>
#include <asm/boot.h>
@@ -365,6 +370,49 @@ static void error(char *x)
asm("hlt");
}
+static void parse_elf(void *output)
+{
+#ifdef CONFIG_X86_64
+ Elf64_Ehdr ehdr;
+ Elf64_Phdr *phdrs, *phdr;
+#else
+ Elf32_Ehdr ehdr;
+ Elf32_Phdr *phdrs, *phdr;
+#endif
+ int i;
+
+ memcpy(&ehdr, output, sizeof(ehdr));
+ if(ehdr.e_ident[EI_MAG0] != ELFMAG0 ||
+ ehdr.e_ident[EI_MAG1] != ELFMAG1 ||
+ ehdr.e_ident[EI_MAG2] != ELFMAG2 ||
+ ehdr.e_ident[EI_MAG3] != ELFMAG3)
+ {
+ error("Kernel is not a valid ELF file");
+ return;
+ }
+
+ putstr("Parsing ELF... ");
+
+ phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
+ if (!phdrs)
+ error("Failed to allocate space for phdrs");
+
+ memcpy(phdrs, output + ehdr.e_phoff, sizeof(*phdrs) * ehdr.e_phnum);
+
+ for (i=0; i<ehdr.e_phnum; i++) {
+ phdr = &phdrs[i];
+
+ switch (phdr->p_type) {
+ case PT_LOAD:
+ memcpy((void*)phdr->p_paddr,
+ output + phdr->p_offset,
+ phdr->p_filesz);
+ break;
+ default: /* Ignore other PT_* */ break;
+ }
+ }
+}
+
asmlinkage void decompress_kernel(void *rmode, memptr heap,
uch *input_data, unsigned long input_len,
uch *output)
@@ -408,6 +456,7 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
makecrc();
putstr("\nDecompressing Linux... ");
gunzip();
+ parse_elf(output);
putstr("done.\nBooting the kernel.\n");
return;
}
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 64ad901..8471658 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -22,6 +22,7 @@
#include <asm/page.h>
#include <asm/setup.h>
#include "boot.h"
+#include "offsets.h"
SETUPSECTS = 4 /* default nr of setup-sectors */
BOOTSEG = 0x07C0 /* original address of boot-sector */
@@ -223,6 +224,11 @@ hardware_subarch: .long 0 # subarchitecture, added with
2.07
hardware_subarch_data: .quad 0
+compressed_payload_offset:
+ .long input_data
+compressed_payload_length:
+ .long input_data_end-input_data
+
# End of setup header #####################################################
.section ".inittext", "ax"
--
1.5.3.8
