Ido Schimmel
2021-Feb-11 07:44 UTC
[Bridge] [PATCH v2 net-next 04/11] net: bridge: offload initial and final port flags through switchdev
On Thu, Feb 11, 2021 at 01:23:52AM +0200, Vladimir Oltean wrote:> On Wed, Feb 10, 2021 at 12:59:49PM +0200, Ido Schimmel wrote: > > > > The reverse, during unlinking, would be to refuse unlinking if the upper > > > > has uppers of its own. netdev_upper_dev_unlink() needs to learn to > > > > return an error and callers such as team/bond need to learn to handle > > > > it, but it seems patchable. > > > > > > Again, this was treated prior to my deletion in this series and not by > > > erroring out, I just really didn't think it through. > > > > > > So you're saying that if we impose that all switchdev drivers restrict > > > the house of cards to be constructed from the bottom up, and destructed > > > from the top down, then the notification of bridge port flags can stay > > > in the bridge layer? > > > > I actually don't think it's a good idea to have this in the bridge in > > any case. I understand that it makes sense for some devices where > > learning, flooding, etc are port attributes, but in other devices these > > can be {port,vlan} attributes and then you need to take care of them > > when a vlan is added / deleted and not only when a port is removed from > > the bridge. So for such devices this really won't save anything. I would > > thus leave it to the lower levels to decide. > > Just for my understanding, how are per-{port,vlan} attributes such as > learning and flooding managed by the Linux bridge? How can I disable > flooding only in a certain VLAN?You can't (currently). But it does not change the fact that in some devices these are {port,vlan} attributes and we are talking here about the interface towards these devices. Having these as {port,vlan} attributes allows you to support use cases such as a port being enslaved to a VLAN-aware bridge and its VLAN upper(s) enslaved to VLAN unaware bridge(s). Obviously you need to ensure there is no conflict between the VLANs used by the VLAN-aware bridge and the VLAN device(s).
Vladimir Oltean
2021-Feb-11 09:35 UTC
[Bridge] [PATCH v2 net-next 04/11] net: bridge: offload initial and final port flags through switchdev
On Thu, Feb 11, 2021 at 09:44:43AM +0200, Ido Schimmel wrote:> On Thu, Feb 11, 2021 at 01:23:52AM +0200, Vladimir Oltean wrote: > > On Wed, Feb 10, 2021 at 12:59:49PM +0200, Ido Schimmel wrote: > > > > > The reverse, during unlinking, would be to refuse unlinking if the upper > > > > > has uppers of its own. netdev_upper_dev_unlink() needs to learn to > > > > > return an error and callers such as team/bond need to learn to handle > > > > > it, but it seems patchable. > > > > > > > > Again, this was treated prior to my deletion in this series and not by > > > > erroring out, I just really didn't think it through. > > > > > > > > So you're saying that if we impose that all switchdev drivers restrict > > > > the house of cards to be constructed from the bottom up, and destructed > > > > from the top down, then the notification of bridge port flags can stay > > > > in the bridge layer? > > > > > > I actually don't think it's a good idea to have this in the bridge in > > > any case. I understand that it makes sense for some devices where > > > learning, flooding, etc are port attributes, but in other devices these > > > can be {port,vlan} attributes and then you need to take care of them > > > when a vlan is added / deleted and not only when a port is removed from > > > the bridge. So for such devices this really won't save anything. I would > > > thus leave it to the lower levels to decide. > > > > Just for my understanding, how are per-{port,vlan} attributes such as > > learning and flooding managed by the Linux bridge? How can I disable > > flooding only in a certain VLAN? > > You can't (currently). But it does not change the fact that in some > devices these are {port,vlan} attributes and we are talking here about > the interface towards these devices. Having these as {port,vlan} > attributes allows you to support use cases such as a port being enslaved > to a VLAN-aware bridge and its VLAN upper(s) enslaved to VLAN unaware > bridge(s).I don't think I understand the use case really. You mean something like this? br1 (vlan_filtering=0) / \ / \ swp0.100 \ | \ |(vlan_filtering \ | br0 =1) \ | / \ \ |/ \ \ swp0 swp1 swp2 A packet received on swp0 with VLAN tag 100 will go to swp0.100 which will be forwarded according to the FDB of br1, and will be delivered to swp2 as untagged? Respectively in the other direction, a packet received on swp2 will have a VLAN 100 tag pushed on egress towards swp0, even if it is already VLAN-tagged? What do you even use this for? And also: if the {port,vlan} attributes can be simulated by making the bridge port be an 8021q upper of a physical interface, then as far as the bridge is concerned, they still are per-port attributes, and they are per-{port,vlan} only as far as the switch driver is concerned - therefore I don't see why it isn't okay for the bridge to notify the brport flags in exactly the same way for them too.> Obviously you need to ensure there is no conflict between the > VLANs used by the VLAN-aware bridge and the VLAN device(s).On the other hand I think I have a more real-life use case that I think is in conflict with this last phrase. I have a VLAN-aware bridge and I want to run PTP in VLAN 7, but I also need to add VLAN 7 in the VLAN table of the bridge ports so that it doesn't drop traffic. PTP is link-local, so I need to run it on VLAN uppers of the switch ports. Like this: ip link add br0 type bridge vlan_filtering 1 ip link set swp0 master br0 ip link set swp1 master br0 bridge vlan add dev swp0 vid 7 master bridge vlan add dev swp1 vid 7 master bridge vlan add dev br0 vid 7 self ip link add link swp0 name swp0.7 type vlan id 7 ip link add link swp1 name swp0.7 type vlan id 7 ptp4l -i swp0.7 -i swp1.7 -m How can I do that considering that you recommend avoiding conflicts between the VLAN-aware bridge and 8021q uppers? Or is that true only when the 8021q uppers are bridged?