thr3ads.net - Linux Ethernet Bridging - [Bridge] [PATCH net-next 01/16] selftests: net: bridge: rename current igmp tests to igmpv2 [Oct 2020]

If this information is useful, please help other people find it:
Share via:

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

[Bridge] [PATCH net-next 00/16] selftests: net: bridge: add tests for IGMPv3

From: Nikolay Aleksandrov <nikolay at nvidia.com>

Hi,
This set adds tests for the bridge's new IGMPv3 support. The tests use
precooked packets which are sent via mausezahn and the resulting state
after each test is checked for proper X,Y sets, (*,G) source list, source
list entry timers, (S,G) existence and flags, packet forwarding and
blocking, exclude group expiration and (*,G) auto-add. The first 3 patches
prepare the existing IGMPv2 tests, then patch 4 adds new helpers which are
used throughout the rest of the v3 tests.
The following new tests are added:
 - base case: IGMPv3 report 239.10.10.10 is_include (A)
 - include -> allow report
 - include -> is_include report
 - include -> is_exclude report
 - include -> to_exclude report
 - exclude -> allow report
 - exclude -> is_include report
 - exclude -> is_exclude report
 - exclude -> to_exclude report
 - include -> block report
 - exclude -> block report
 - exclude timeout (move to include + entry deletion)
 - S,G port entry automatic add to a *,G,exclude port

The variable names and set notation are the same as per RFC 3376,
for more information check RFC 3376 sections 4.2.15 and 6.4.1.
MLDv2 tests will be added by a separate patch-set.

Thanks,
 Nik

Nikolay Aleksandrov (16):
  selftests: net: bridge: rename current igmp tests to igmpv2
  selftests: net: bridge: igmp: add support for packet source address
  selftests: net: bridge: igmp: check for specific udp ip protocol
  selftests: net: bridge: igmp: add IGMPv3 entries' state helpers
  selftests: net: bridge: add tests for igmpv3 is_include and inc ->
    allow reports
  selftests: net: bridge: add test for igmpv3 inc -> is_include report
  selftests: net: bridge: add test for igmpv3 inc -> is_exclude report
  selftests: net: bridge: add test for igmpv3 inc -> to_exclude report
  selftests: net: bridge: add test for igmpv3 exc -> allow report
  selftests: net: bridge: add test for igmpv3 exc -> is_include report
  selftests: net: bridge: add test for igmpv3 exc -> is_exclude report
  selftests: net: bridge: add test for igmpv3 exc -> to_exclude report
  selftests: net: bridge: add test for igmpv3 inc -> block report
  selftests: net: bridge: add test for igmpv3 exc -> block report
  selftests: net: bridge: add test for igmpv3 exclude timeout
  selftests: net: bridge: add test for igmpv3 *,g auto-add

 .../selftests/net/forwarding/bridge_igmp.sh   | 532 +++++++++++++++++-
 1 file changed, 520 insertions(+), 12 deletions(-)

-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 01/16] selftests: net: bridge: rename current igmp tests to igmpv2

From: Nikolay Aleksandrov <nikolay at nvidia.com>

To prepare the bridge_igmp.sh for IGMPv3 we need to rename the
current test to IGMPv2.

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 tools/testing/selftests/net/forwarding/bridge_igmp.sh | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index 88d2472ba151..481198300b72 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="reportleave_test"
+ALL_TESTS="v2reportleave_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="239.10.10.10"
@@ -110,7 +110,7 @@ mcast_packet_test()
 	return $seen
 }
 
-reportleave_test()
+v2reportleave_test()
 {
 	RET=0
 	ip address add dev $h2 $TEST_GROUP/32 autojoin
@@ -118,12 +118,12 @@ reportleave_test()
 
 	sleep 5
 	bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null
-	check_err $? "Report didn't create mdb entry for $TEST_GROUP"
+	check_err $? "IGMPv2 report didn't create mdb entry for
$TEST_GROUP"
 
 	mcast_packet_test $TEST_GROUP_MAC $TEST_GROUP $h1 $h2
 	check_fail $? "Traffic to $TEST_GROUP wasn't forwarded"
 
-	log_test "IGMP report $TEST_GROUP"
+	log_test "IGMPv2 report $TEST_GROUP"
 
 	RET=0
 	bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null
@@ -139,7 +139,7 @@ reportleave_test()
 	mcast_packet_test $TEST_GROUP_MAC $TEST_GROUP $h1 $h2
 	check_err $? "Traffic to $TEST_GROUP was forwarded without mdb
entry"
 
-	log_test "IGMP leave $TEST_GROUP"
+	log_test "IGMPv2 leave $TEST_GROUP"
 }
 
 trap cleanup EXIT
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 02/16] selftests: net: bridge: igmp: add support for packet source address

From: Nikolay Aleksandrov <nikolay at nvidia.com>

Add support for one more argument which specifies the source address to
use. It will be later used for IGMPv3 S,G entry testing.

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../testing/selftests/net/forwarding/bridge_igmp.sh | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index 481198300b72..1c19459dbc58 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -83,9 +83,10 @@ cleanup()
 mcast_packet_test()
 {
 	local mac=$1
-	local ip=$2
-	local host1_if=$3
-	local host2_if=$4
+	local src_ip=$2
+	local ip=$3
+	local host1_if=$4
+	local host2_if=$5
 	local seen=0
 
 	# Add an ACL on `host2_if` which will tell us whether the packet
@@ -94,7 +95,7 @@ mcast_packet_test()
 	tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \
 		flower dst_mac $mac action drop
 
-	$MZ $host1_if -c 1 -p 64 -b $mac -B $ip -t udp "dp=4096,sp=2048" -q
+	$MZ $host1_if -c 1 -p 64 -b $mac -A $src_ip -B $ip -t udp
"dp=4096,sp=2048" -q
 	sleep 1
 
 	tc -j -s filter show dev $host2_if ingress \
@@ -120,7 +121,7 @@ v2reportleave_test()
 	bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null
 	check_err $? "IGMPv2 report didn't create mdb entry for
$TEST_GROUP"
 
-	mcast_packet_test $TEST_GROUP_MAC $TEST_GROUP $h1 $h2
+	mcast_packet_test $TEST_GROUP_MAC 192.0.2.1 $TEST_GROUP $h1 $h2
 	check_fail $? "Traffic to $TEST_GROUP wasn't forwarded"
 
 	log_test "IGMPv2 report $TEST_GROUP"
@@ -136,7 +137,7 @@ v2reportleave_test()
 	bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null
 	check_fail $? "Leave didn't delete mdb entry for $TEST_GROUP"
 
-	mcast_packet_test $TEST_GROUP_MAC $TEST_GROUP $h1 $h2
+	mcast_packet_test $TEST_GROUP_MAC 192.0.2.1 $TEST_GROUP $h1 $h2
 	check_err $? "Traffic to $TEST_GROUP was forwarded without mdb
entry"
 
 	log_test "IGMPv2 leave $TEST_GROUP"
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 03/16] selftests: net: bridge: igmp: check for specific udp ip protocol

From: Nikolay Aleksandrov <nikolay at nvidia.com>

We have to specifically check for udp protocol in addition to the mac
address because in IGMPv3 tests group-specific queries will use the same
mac address.

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 tools/testing/selftests/net/forwarding/bridge_igmp.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index 1c19459dbc58..5562aef14c0a 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -93,7 +93,7 @@ mcast_packet_test()
 	# was received by it or not.
 	tc qdisc add dev $host2_if ingress
 	tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \
-		flower dst_mac $mac action drop
+		flower ip_proto udp dst_mac $mac action drop
 
 	$MZ $host1_if -c 1 -p 64 -b $mac -A $src_ip -B $ip -t udp
"dp=4096,sp=2048" -q
 	sleep 1
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 04/16] selftests: net: bridge: igmp: add IGMPv3 entries' state helpers

From: Nikolay Aleksandrov <nikolay at nvidia.com>

Add helpers which will be used in subsequent tests, they are:
 - check_sg_entries: check for proper source list and S,G entry
   existence
 - check_sg_fwding: check for proper traffic forwarding/blocking
 - check_sg_state: check for proper blocked/forwarding entry state

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../selftests/net/forwarding/bridge_igmp.sh   | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index 5562aef14c0a..19c1f46d1151 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -143,6 +143,73 @@ v2reportleave_test()
 	log_test "IGMPv2 leave $TEST_GROUP"
 }
 
+check_sg_entries()
+{
+	local report=$1; shift
+	local slist=("$@")
+	local sarg=""
+
+	for src in "${slist[@]}"; do
+		sarg="${sarg} and .source_list[].address == \"$src\""
+	done
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .source_list != null
$sarg)" &>/dev/null
+	check_err $? "Wrong *,G entry source list after $report report"
+
+	for sgent in "${slist[@]}"; do
+		bridge -j -d -s mdb show dev br0 \
+			| jq -e ".[].mdb[] | \
+				 select(.grp == \"$TEST_GROUP\" and .src ==
\"$sgent\")" &>/dev/null
+		check_err $? "Missing S,G entry ($sgent, $TEST_GROUP)"
+	done
+}
+
+check_sg_fwding()
+{
+	local should_fwd=$1; shift
+	local sources=("$@")
+
+	for src in "${sources[@]}"; do
+		local retval=0
+
+		mcast_packet_test $TEST_GROUP_MAC $src $TEST_GROUP $h2 $h1
+		retval=$?
+		if [ $should_fwd -eq 1 ]; then
+			check_fail $retval "Didn't forward traffic from S,G ($src,
$TEST_GROUP)"
+		else
+			check_err $retval "Forwarded traffic for blocked S,G ($src,
$TEST_GROUP)"
+		fi
+	done
+}
+
+check_sg_state()
+{
+	local is_blocked=$1; shift
+	local sources=("$@")
+	local should_fail=1
+
+	if [ $is_blocked -eq 1 ]; then
+		should_fail=0
+	fi
+
+	for src in "${sources[@]}"; do
+		bridge -j -d -s mdb show dev br0 \
+			| jq -e ".[].mdb[] | \
+				 select(.grp == \"$TEST_GROUP\" and .source_list != null) |
+				 .source_list[] |
+				 select(.address == \"$src\") |
+				 select(.timer == \"0.00\")" &>/dev/null
+		check_err_fail $should_fail $? "Entry $src has zero timer"
+
+		bridge -j -d -s mdb show dev br0 \
+			| jq -e ".[].mdb[] | \
+				 select(.grp == \"$TEST_GROUP\" and .src == \"$src\"
and \
+				 .flags[] == \"blocked\")" &>/dev/null
+		check_err_fail $should_fail $? "Entry $src has blocked flag"
+	done
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 05/16] selftests: net: bridge: add tests for igmpv3 is_include and inc -> allow reports

From: Nikolay Aleksandrov <nikolay at nvidia.com>

First we test is_include/include mode then we build on that with allow
effectively achieving:
  state          report        result                 action
 INCLUDE (A)    ALLOW (B)    INCLUDE (A+B)           (B)=GMI

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../selftests/net/forwarding/bridge_igmp.sh   | 82 ++++++++++++++++++-
 1 file changed, 81 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index 19c1f46d1151..e9999e346ea6 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -1,11 +1,20 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="v2reportleave_test"
+ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="239.10.10.10"
 TEST_GROUP_MAC="01:00:5e:0a:0a:0a"
+
+ALL_GROUP="224.0.0.1"
+ALL_MAC="01:00:5e:00:00:01"
+
+# IGMPv3 is_in report: grp 239.10.10.10 is_include
192.0.2.1,192.0.2.2,192.0.2.3
+MZPKT_IS_INC="22:00:9d:de:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:03"
+# IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.10,192.0.2.11,192.0.2.12
+MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c"
+
 source lib.sh
 
 h1_create()
@@ -210,6 +219,77 @@ check_sg_state()
 	done
 }
 
+v3include_prepare()
+{
+	local host1_if=$1
+	local mac=$2
+	local group=$3
+	local X=("192.0.2.1" "192.0.2.2" "192.0.2.3")
+
+	ip link set dev br0 type bridge mcast_igmp_version 3
+	check_err $? "Could not change bridge IGMP version to 3"
+
+	$MZ $host1_if -b $mac -c 1 -B $group -t ip "proto=2,p=$MZPKT_IS_INC"
-q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .source_list != null)"
&>/dev/null
+	check_err $? "Missing *,G entry with source list"
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"include\")"
&>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+	check_sg_entries "is_include" "${X[@]}"
+}
+
+v3cleanup()
+{
+	local port=$1
+	local group=$2
+
+	bridge mdb del dev br0 port $port grp $group
+	ip link set dev br0 type bridge mcast_igmp_version 2
+}
+
+v3include_test()
+{
+	RET=0
+	local X=("192.0.2.1" "192.0.2.2" "192.0.2.3")
+
+	v3include_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	check_sg_state 0 "${X[@]}"
+
+	check_sg_fwding 1 "${X[@]}"
+	check_sg_fwding 0 "192.0.2.100"
+
+	log_test "IGMPv3 report $TEST_GROUP is_include"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
+v3inc_allow_test()
+{
+	RET=0
+	local X=("192.0.2.10" "192.0.2.11" "192.0.2.12")
+
+	v3include_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip
"proto=2,p=$MZPKT_ALLOW" -q
+	sleep 1
+	check_sg_entries "allow" "${X[@]}"
+
+	check_sg_state 0 "${X[@]}"
+
+	check_sg_fwding 1 "${X[@]}"
+	check_sg_fwding 0 "192.0.2.100"
+
+	log_test "IGMPv3 report $TEST_GROUP include -> allow"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 06/16] selftests: net: bridge: add test for igmpv3 inc -> is_include report

From: Nikolay Aleksandrov <nikolay at nvidia.com>

The test checks for the following case:
   state          report        result                 action
 INCLUDE (A)    IS_IN (B)     INCLUDE (A+B)            (B)=GMI

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../selftests/net/forwarding/bridge_igmp.sh   | 25 ++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index e9999e346ea6..added5c69e8b 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test"
+ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test
v3inc_is_include_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="239.10.10.10"
@@ -12,6 +12,8 @@ ALL_MAC="01:00:5e:00:00:01"
 
 # IGMPv3 is_in report: grp 239.10.10.10 is_include
192.0.2.1,192.0.2.2,192.0.2.3
 MZPKT_IS_INC="22:00:9d:de:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:03"
+# IGMPv3 is_in report: grp 239.10.10.10 is_include
192.0.2.10,192.0.2.11,192.0.2.12
+MZPKT_IS_INC2="22:00:9d:c3:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c"
 # IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.10,192.0.2.11,192.0.2.12
 MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c"
 
@@ -290,6 +292,27 @@ v3inc_allow_test()
 	v3cleanup $swp1 $TEST_GROUP
 }
 
+v3inc_is_include_test()
+{
+	RET=0
+	local X=("192.0.2.10" "192.0.2.11" "192.0.2.12")
+
+	v3include_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip
"proto=2,p=$MZPKT_IS_INC2" -q
+	sleep 1
+	check_sg_entries "is_include" "${X[@]}"
+
+	check_sg_state 0 "${X[@]}"
+
+	check_sg_fwding 1 "${X[@]}"
+	check_sg_fwding 0 "192.0.2.100"
+
+	log_test "IGMPv3 report $TEST_GROUP include -> is_include"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 07/16] selftests: net: bridge: add test for igmpv3 inc -> is_exclude report

From: Nikolay Aleksandrov <nikolay at nvidia.com>

The test checks for the following case:
   state          report        result                 action
  INCLUDE (A)    IS_EX (B)     EXCLUDE (A*B,B-A)      (B-A)=0
                                                      Delete (A-B)
                                                      Group Timer=GMI

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../selftests/net/forwarding/bridge_igmp.sh   | 41 ++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index added5c69e8b..34d2c4370fa6 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -1,7 +1,8 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test
v3inc_is_include_test"
+ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test
v3inc_is_include_test \
+	   v3inc_is_exclude_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="239.10.10.10"
@@ -16,6 +17,8 @@
MZPKT_IS_INC="22:00:9d:de:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:
 MZPKT_IS_INC2="22:00:9d:c3:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c"
 # IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.10,192.0.2.11,192.0.2.12
 MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c"
+# IGMPv3 is_ex report: grp 239.10.10.10 is_exclude
192.0.2.1,192.0.2.2,192.0.2.20,192.0.2.21
+MZPKT_IS_EXC="22:00:da:b6:00:00:00:01:02:00:00:04:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:14:c0:00:02:15"
 
 source lib.sh
 
@@ -313,6 +316,42 @@ v3inc_is_include_test()
 	v3cleanup $swp1 $TEST_GROUP
 }
 
+v3inc_is_exclude_test()
+{
+	RET=0
+	local X=("192.0.2.1" "192.0.2.2")
+	local Y=("192.0.2.20" "192.0.2.21")
+
+	v3include_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip
"proto=2,p=$MZPKT_IS_EXC" -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"exclude\")"
&>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+
+	check_sg_entries "is_exclude" "${X[@]}"
"${Y[@]}"
+
+	check_sg_state 0 "${X[@]}"
+	check_sg_state 1 "${Y[@]}"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"192.0.2.3\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 192.0.2.3 entry still
exists"
+
+	check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP include -> is_exclude"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 08/16] selftests: net: bridge: add test for igmpv3 inc -> to_exclude report

From: Nikolay Aleksandrov <nikolay at nvidia.com>

The test checks for the following case:
  state          report        result                  action
 INCLUDE (A)    TO_EX (B)     EXCLUDE (A*B,B-A)       (B-A)=0
                                                      Delete (A-B)
                                                      Send Q(G,A*B)
                                                      Group Timer=GMI

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../selftests/net/forwarding/bridge_igmp.sh   | 51 ++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index 34d2c4370fa6..36f10a3168cc 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -2,7 +2,7 @@
 # SPDX-License-Identifier: GPL-2.0
 
 ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test
v3inc_is_include_test \
-	   v3inc_is_exclude_test"
+	   v3inc_is_exclude_test v3inc_to_exclude_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="239.10.10.10"
@@ -19,6 +19,8 @@
MZPKT_IS_INC2="22:00:9d:c3:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00
 MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c"
 # IGMPv3 is_ex report: grp 239.10.10.10 is_exclude
192.0.2.1,192.0.2.2,192.0.2.20,192.0.2.21
 MZPKT_IS_EXC="22:00:da:b6:00:00:00:01:02:00:00:04:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:14:c0:00:02:15"
+# IGMPv3 to_ex report: grp 239.10.10.10 to_exclude
192.0.2.1,192.0.2.20,192.0.2.30
+MZPKT_TO_EXC="22:00:9a:b1:00:00:00:01:04:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:14:c0:00:02:1e"
 
 source lib.sh
 
@@ -352,6 +354,53 @@ v3inc_is_exclude_test()
 	v3cleanup $swp1 $TEST_GROUP
 }
 
+v3inc_to_exclude_test()
+{
+	RET=0
+	local X=("192.0.2.1")
+	local Y=("192.0.2.20" "192.0.2.30")
+
+	v3include_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	ip link set dev br0 type bridge mcast_last_member_interval 500
+	check_err $? "Could not change mcast_last_member_interval to 5s"
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip
"proto=2,p=$MZPKT_TO_EXC" -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"exclude\")"
&>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+
+	check_sg_entries "to_exclude" "${X[@]}"
"${Y[@]}"
+
+	check_sg_state 0 "${X[@]}"
+	check_sg_state 1 "${Y[@]}"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"192.0.2.2\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 192.0.2.2 entry still
exists"
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"192.0.2.21\")"
&>/dev/null
+	check_fail $? "Wrong *,G entry source list, 192.0.2.21 entry still
exists"
+
+	check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP include -> to_exclude"
+
+	ip link set dev br0 type bridge mcast_last_member_interval 100
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 09/16] selftests: net: bridge: add test for igmpv3 exc -> allow report

From: Nikolay Aleksandrov <nikolay at nvidia.com>

The test checks for the following case:
   state          report        result                  action
  EXCLUDE (X,Y)  ALLOW (A)     EXCLUDE (X+A,Y-A)       (A)=GMI

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../selftests/net/forwarding/bridge_igmp.sh   | 83 +++++++++++++------
 1 file changed, 59 insertions(+), 24 deletions(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index 36f10a3168cc..d786e75abe2c 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -2,7 +2,7 @@
 # SPDX-License-Identifier: GPL-2.0
 
 ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test
v3inc_is_include_test \
-	   v3inc_is_exclude_test v3inc_to_exclude_test"
+	   v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="239.10.10.10"
@@ -17,6 +17,8 @@
MZPKT_IS_INC="22:00:9d:de:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:
 MZPKT_IS_INC2="22:00:9d:c3:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c"
 # IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.10,192.0.2.11,192.0.2.12
 MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c"
+# IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.20,192.0.2.30
+MZPKT_ALLOW2="22:00:5b:b4:00:00:00:01:05:00:00:02:ef:0a:0a:0a:c0:00:02:14:c0:00:02:1e"
 # IGMPv3 is_ex report: grp 239.10.10.10 is_exclude
192.0.2.1,192.0.2.2,192.0.2.20,192.0.2.21
 MZPKT_IS_EXC="22:00:da:b6:00:00:00:01:02:00:00:04:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:14:c0:00:02:15"
 # IGMPv3 to_ex report: grp 239.10.10.10 to_exclude
192.0.2.1,192.0.2.20,192.0.2.30
@@ -250,6 +252,38 @@ v3include_prepare()
 	check_sg_entries "is_include" "${X[@]}"
 }
 
+v3exclude_prepare()
+{
+	local host1_if=$1
+	local mac=$2
+	local group=$3
+	local pkt=$4
+	local X=("192.0.2.1" "192.0.2.2")
+	local Y=("192.0.2.20" "192.0.2.21")
+
+	v3include_prepare $host1_if $mac $group
+
+	$MZ $host1_if -c 1 -b $mac -B $group -t ip "proto=2,p=$MZPKT_IS_EXC"
-q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"exclude\")"
&>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+
+	check_sg_entries "is_exclude" "${X[@]}"
"${Y[@]}"
+
+	check_sg_state 0 "${X[@]}"
+	check_sg_state 1 "${Y[@]}"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"192.0.2.3\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 192.0.2.3 entry still
exists"
+}
+
 v3cleanup()
 {
 	local port=$1
@@ -321,30 +355,8 @@ v3inc_is_include_test()
 v3inc_is_exclude_test()
 {
 	RET=0
-	local X=("192.0.2.1" "192.0.2.2")
-	local Y=("192.0.2.20" "192.0.2.21")
-
-	v3include_prepare $h1 $ALL_MAC $ALL_GROUP
-
-	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip
"proto=2,p=$MZPKT_IS_EXC" -q
-	sleep 1
-	bridge -j -d -s mdb show dev br0 \
-		| jq -e ".[].mdb[] | \
-			 select(.grp == \"$TEST_GROUP\" and \
-				.source_list != null and .filter_mode == \"exclude\")"
&>/dev/null
-	check_err $? "Wrong *,G entry filter mode"
-
-	check_sg_entries "is_exclude" "${X[@]}"
"${Y[@]}"
 
-	check_sg_state 0 "${X[@]}"
-	check_sg_state 1 "${Y[@]}"
-
-	bridge -j -d -s mdb show dev br0 \
-		| jq -e ".[].mdb[] | \
-			 select(.grp == \"$TEST_GROUP\" and \
-				.source_list != null and
-				.source_list[].address == \"192.0.2.3\")" &>/dev/null
-	check_fail $? "Wrong *,G entry source list, 192.0.2.3 entry still
exists"
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
 
 	check_sg_fwding 1 "${X[@]}" 192.0.2.100
 	check_sg_fwding 0 "${Y[@]}"
@@ -401,6 +413,29 @@ v3inc_to_exclude_test()
 	v3cleanup $swp1 $TEST_GROUP
 }
 
+v3exc_allow_test()
+{
+	RET=0
+	local X=("192.0.2.1" "192.0.2.2" "192.0.2.20"
"192.0.2.30")
+	local Y=("192.0.2.21")
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip
"proto=2,p=$MZPKT_ALLOW2" -q
+	sleep 1
+	check_sg_entries "allow" "${X[@]}" "${Y[@]}"
+
+	check_sg_state 0 "${X[@]}"
+	check_sg_state 1 "${Y[@]}"
+
+	check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP exclude -> allow"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 10/16] selftests: net: bridge: add test for igmpv3 exc -> is_include report

From: Nikolay Aleksandrov <nikolay at nvidia.com>

The test checks for the following case:
    state          report        result                  action
   EXCLUDE (X,Y)  IS_IN (A)     EXCLUDE (X+A,Y-A)       (A)=GMI

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../selftests/net/forwarding/bridge_igmp.sh   | 27 ++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index d786e75abe2c..b2b0f7d7e860 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -2,7 +2,7 @@
 # SPDX-License-Identifier: GPL-2.0
 
 ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test
v3inc_is_include_test \
-	   v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test"
+	   v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test
v3exc_is_include_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="239.10.10.10"
@@ -15,6 +15,8 @@ ALL_MAC="01:00:5e:00:00:01"
 MZPKT_IS_INC="22:00:9d:de:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:03"
 # IGMPv3 is_in report: grp 239.10.10.10 is_include
192.0.2.10,192.0.2.11,192.0.2.12
 MZPKT_IS_INC2="22:00:9d:c3:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c"
+# IGMPv3 is_in report: grp 239.10.10.10 is_include 192.0.2.20,192.0.2.30
+MZPKT_IS_INC3="22:00:5f:b4:00:00:00:01:01:00:00:02:ef:0a:0a:0a:c0:00:02:14:c0:00:02:1e"
 # IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.10,192.0.2.11,192.0.2.12
 MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c"
 # IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.20,192.0.2.30
@@ -436,6 +438,29 @@ v3exc_allow_test()
 	v3cleanup $swp1 $TEST_GROUP
 }
 
+v3exc_is_include_test()
+{
+	RET=0
+	local X=("192.0.2.1" "192.0.2.2" "192.0.2.20"
"192.0.2.30")
+	local Y=("192.0.2.21")
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip
"proto=2,p=$MZPKT_IS_INC3" -q
+	sleep 1
+	check_sg_entries "is_include" "${X[@]}"
"${Y[@]}"
+
+	check_sg_state 0 "${X[@]}"
+	check_sg_state 1 "${Y[@]}"
+
+	check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP exclude -> is_include"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 11/16] selftests: net: bridge: add test for igmpv3 exc -> is_exclude report

From: Nikolay Aleksandrov <nikolay at nvidia.com>

The test checks for the following case:
     state          report        result                  action
   EXCLUDE (X,Y)  IS_EX (A)     EXCLUDE (A-Y,Y*A)        (A-X-Y)=GMI
                                                         Delete (X-A)
                                                         Delete (Y-A)
                                                         Group Timer=GMI

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../selftests/net/forwarding/bridge_igmp.sh   | 28 ++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index b2b0f7d7e860..91b0b26428f6 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -2,7 +2,8 @@
 # SPDX-License-Identifier: GPL-2.0
 
 ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test
v3inc_is_include_test \
-	   v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test
v3exc_is_include_test"
+	   v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test
v3exc_is_include_test \
+	   v3exc_is_exclude_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="239.10.10.10"
@@ -23,6 +24,8 @@
MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:0
 MZPKT_ALLOW2="22:00:5b:b4:00:00:00:01:05:00:00:02:ef:0a:0a:0a:c0:00:02:14:c0:00:02:1e"
 # IGMPv3 is_ex report: grp 239.10.10.10 is_exclude
192.0.2.1,192.0.2.2,192.0.2.20,192.0.2.21
 MZPKT_IS_EXC="22:00:da:b6:00:00:00:01:02:00:00:04:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:14:c0:00:02:15"
+# IGMPv3 is_ex report: grp 239.10.10.10 is_exclude 192.0.2.20,192.0.2.30
+MZPKT_IS_EXC2="22:00:5e:b4:00:00:00:01:02:00:00:02:ef:0a:0a:0a:c0:00:02:14:c0:00:02:1e"
 # IGMPv3 to_ex report: grp 239.10.10.10 to_exclude
192.0.2.1,192.0.2.20,192.0.2.30
 MZPKT_TO_EXC="22:00:9a:b1:00:00:00:01:04:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:14:c0:00:02:1e"
 
@@ -461,6 +464,29 @@ v3exc_is_include_test()
 	v3cleanup $swp1 $TEST_GROUP
 }
 
+v3exc_is_exclude_test()
+{
+	RET=0
+	local X=("192.0.2.30")
+	local Y=("192.0.2.20")
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip
"proto=2,p=$MZPKT_IS_EXC2" -q
+	sleep 1
+	check_sg_entries "is_exclude" "${X[@]}"
"${Y[@]}"
+
+	check_sg_state 0 "${X[@]}"
+	check_sg_state 1 "${Y[@]}"
+
+	check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP exclude -> is_exclude"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 12/16] selftests: net: bridge: add test for igmpv3 exc -> to_exclude report

From: Nikolay Aleksandrov <nikolay at nvidia.com>

The test checks for the following case:
    state          report        result                  action
  EXCLUDE (X,Y)  TO_EX (A)     EXCLUDE (A-Y,Y*A)        (A-X-Y)=Group Timer
                                                        Delete (X-A)
                                                        Delete (Y-A)
                                                        Send Q(G,A-Y)
                                                        Group Timer=GMI

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../selftests/net/forwarding/bridge_igmp.sh   | 30 ++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index 91b0b26428f6..3cfc30b88285 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -3,7 +3,7 @@
 
 ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test
v3inc_is_include_test \
 	   v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test
v3exc_is_include_test \
-	   v3exc_is_exclude_test"
+	   v3exc_is_exclude_test v3exc_to_exclude_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="239.10.10.10"
@@ -487,6 +487,34 @@ v3exc_is_exclude_test()
 	v3cleanup $swp1 $TEST_GROUP
 }
 
+v3exc_to_exclude_test()
+{
+	RET=0
+	local X=("192.0.2.1" "192.0.2.30")
+	local Y=("192.0.2.20")
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	ip link set dev br0 type bridge mcast_last_member_interval 500
+	check_err $? "Could not change mcast_last_member_interval to 5s"
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip
"proto=2,p=$MZPKT_TO_EXC" -q
+	sleep 1
+	check_sg_entries "to_exclude" "${X[@]}"
"${Y[@]}"
+
+	check_sg_state 0 "${X[@]}"
+	check_sg_state 1 "${Y[@]}"
+
+	check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP exclude -> to_exclude"
+
+	ip link set dev br0 type bridge mcast_last_member_interval 100
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 13/16] selftests: net: bridge: add test for igmpv3 inc -> block report

From: Nikolay Aleksandrov <nikolay at nvidia.com>

The test checks for the following case:
    state          report        result                  action
  INCLUDE (A)    BLOCK (B)     INCLUDE (A)              Send Q(G,A*B)

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../selftests/net/forwarding/bridge_igmp.sh   | 33 ++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index 3cfc30b88285..3772c7a066c9 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -3,7 +3,7 @@
 
 ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test
v3inc_is_include_test \
 	   v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test
v3exc_is_include_test \
-	   v3exc_is_exclude_test v3exc_to_exclude_test"
+	   v3exc_is_exclude_test v3exc_to_exclude_test v3inc_block_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="239.10.10.10"
@@ -28,6 +28,8 @@
MZPKT_IS_EXC="22:00:da:b6:00:00:00:01:02:00:00:04:ef:0a:0a:0a:c0:00:02:01:c0:00:
 MZPKT_IS_EXC2="22:00:5e:b4:00:00:00:01:02:00:00:02:ef:0a:0a:0a:c0:00:02:14:c0:00:02:1e"
 # IGMPv3 to_ex report: grp 239.10.10.10 to_exclude
192.0.2.1,192.0.2.20,192.0.2.30
 MZPKT_TO_EXC="22:00:9a:b1:00:00:00:01:04:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:14:c0:00:02:1e"
+# IGMPv3 block report: grp 239.10.10.10 block 192.0.2.1,192.0.2.20,192.0.2.30
+MZPKT_BLOCK="22:00:98:b1:00:00:00:01:06:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:14:c0:00:02:1e"
 
 source lib.sh
 
@@ -515,6 +517,35 @@ v3exc_to_exclude_test()
 	v3cleanup $swp1 $TEST_GROUP
 }
 
+v3inc_block_test()
+{
+	RET=0
+	local X=("192.0.2.2" "192.0.2.3")
+
+	v3include_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip
"proto=2,p=$MZPKT_BLOCK" -q
+	# make sure the lowered timers have expired (by default 2 seconds)
+	sleep 3
+	check_sg_entries "block" "${X[@]}"
+
+	check_sg_state 0 "${X[@]}"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"192.0.2.1\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 192.0.2.1 entry still
exists"
+
+	check_sg_fwding 1 "${X[@]}"
+	check_sg_fwding 0 "192.0.2.100"
+
+	log_test "IGMPv3 report $TEST_GROUP include -> block"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 14/16] selftests: net: bridge: add test for igmpv3 exc -> block report

From: Nikolay Aleksandrov <nikolay at nvidia.com>

The test checks for the following case:
   state          report        result                  action
 EXCLUDE (X,Y)  BLOCK (A)     EXCLUDE (X+(A-Y),Y)      (A-X-Y)=Group Timer
                                                       Send Q(G,A-Y)

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../selftests/net/forwarding/bridge_igmp.sh   | 30 ++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index 3772c7a066c9..45c5619666d8 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -3,7 +3,7 @@
 
 ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test
v3inc_is_include_test \
 	   v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test
v3exc_is_include_test \
-	   v3exc_is_exclude_test v3exc_to_exclude_test v3inc_block_test"
+	   v3exc_is_exclude_test v3exc_to_exclude_test v3inc_block_test
v3exc_block_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="239.10.10.10"
@@ -546,6 +546,34 @@ v3inc_block_test()
 	v3cleanup $swp1 $TEST_GROUP
 }
 
+v3exc_block_test()
+{
+	RET=0
+	local X=("192.0.2.1" "192.0.2.2" "192.0.2.30")
+	local Y=("192.0.2.20" "192.0.2.21")
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	ip link set dev br0 type bridge mcast_last_member_interval 500
+	check_err $? "Could not change mcast_last_member_interval to 5s"
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip
"proto=2,p=$MZPKT_BLOCK" -q
+	sleep 1
+	check_sg_entries "block" "${X[@]}" "${Y[@]}"
+
+	check_sg_state 0 "${X[@]}"
+	check_sg_state 1 "${Y[@]}"
+
+	check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP exclude -> block"
+
+	ip link set dev br0 type bridge mcast_last_member_interval 100
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 15/16] selftests: net: bridge: add test for igmpv3 exclude timeout

From: Nikolay Aleksandrov <nikolay at nvidia.com>

Test that when a group in exclude mode expires it changes mode to
include and the blocked entries are deleted.

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../selftests/net/forwarding/bridge_igmp.sh   | 49 ++++++++++++++++++-
 1 file changed, 48 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index 45c5619666d8..db0a03e30868 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -3,7 +3,8 @@
 
 ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test
v3inc_is_include_test \
 	   v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test
v3exc_is_include_test \
-	   v3exc_is_exclude_test v3exc_to_exclude_test v3inc_block_test
v3exc_block_test"
+	   v3exc_is_exclude_test v3exc_to_exclude_test v3inc_block_test
v3exc_block_test \
+	   v3exc_timeout_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="239.10.10.10"
@@ -574,6 +575,52 @@ v3exc_block_test()
 	v3cleanup $swp1 $TEST_GROUP
 }
 
+v3exc_timeout_test()
+{
+	RET=0
+	local X=("192.0.2.20" "192.0.2.30")
+
+	# GMI should be 3 seconds
+	ip link set dev br0 type bridge mcast_query_interval 100
mcast_query_response_interval 100
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+	ip link set dev br0 type bridge mcast_query_interval 500
mcast_query_response_interval 500
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip
"proto=2,p=$MZPKT_ALLOW2" -q
+	sleep 3
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"include\")"
&>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"192.0.2.1\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 192.0.2.1 entry still
exists"
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"192.0.2.2\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 192.0.2.2 entry still
exists"
+
+	check_sg_entries "allow" "${X[@]}"
+
+	check_sg_state 0 "${X[@]}"
+
+	check_sg_fwding 1 "${X[@]}"
+	check_sg_fwding 0 192.0.2.100
+
+	log_test "IGMPv3 group $TEST_GROUP exclude timeout"
+
+	ip link set dev br0 type bridge mcast_query_interval 12500 \
+					mcast_query_response_interval 1000
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.25.4

Nikolay Aleksandrov

2020-Oct-27 18:59 UTC

head link

[Bridge] [PATCH net-next 16/16] selftests: net: bridge: add test for igmpv3 *, g auto-add

From: Nikolay Aleksandrov <nikolay at nvidia.com>

When we have *,G ports in exclude mode and a new S,G,port is added
the kernel has to automatically create an S,G entry for each exclude
port to get proper forwarding.

Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
---
 .../selftests/net/forwarding/bridge_igmp.sh   | 31 ++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
index db0a03e30868..0e71abdd7a03 100755
--- a/tools/testing/selftests/net/forwarding/bridge_igmp.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -4,7 +4,7 @@
 ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test
v3inc_is_include_test \
 	   v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test
v3exc_is_include_test \
 	   v3exc_is_exclude_test v3exc_to_exclude_test v3inc_block_test
v3exc_block_test \
-	   v3exc_timeout_test"
+	   v3exc_timeout_test v3star_ex_auto_add_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="239.10.10.10"
@@ -621,6 +621,35 @@ v3exc_timeout_test()
 	v3cleanup $swp1 $TEST_GROUP
 }
 
+v3star_ex_auto_add_test()
+{
+	RET=0
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h2 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip
"proto=2,p=$MZPKT_IS_INC" -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .src ==
\"192.0.2.3\" and \
+				.port == \"$swp1\")" &>/dev/null
+	check_err $? "S,G entry for *,G port doesn't exist"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .src ==
\"192.0.2.3\" and \
+				.port == \"$swp1\" and \
+				.flags[] == \"added_by_star_ex\")" &>/dev/null
+	check_err $? "Auto-added S,G entry doesn't have added_by_star_ex
flag"
+
+	check_sg_fwding 1 192.0.2.3
+
+	log_test "IGMPv3 S,G port entry automatic add to a *,G port"
+
+	v3cleanup $swp1 $TEST_GROUP
+	v3cleanup $swp2 $TEST_GROUP
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.25.4

Jakub Kicinski

2020-Oct-30 17:53 UTC

head link

[Bridge] [PATCH net-next 00/16] selftests: net: bridge: add tests for IGMPv3

On Tue, 27 Oct 2020 20:59:18 +0200 Nikolay Aleksandrov
wrote:> This set adds tests for the bridge's new IGMPv3 support. The tests use
> precooked packets which are sent via mausezahn and the resulting state
> after each test is checked for proper X,Y sets, (*,G) source list, source
> list entry timers, (S,G) existence and flags, packet forwarding and
> blocking, exclude group expiration and (*,G) auto-add. The first 3 patches
> prepare the existing IGMPv2 tests, then patch 4 adds new helpers which are
> used throughout the rest of the v3 tests.
> The following new tests are added:
>  - base case: IGMPv3 report 239.10.10.10 is_include (A)
>  - include -> allow report
>  - include -> is_include report
>  - include -> is_exclude report
>  - include -> to_exclude report
>  - exclude -> allow report
>  - exclude -> is_include report
>  - exclude -> is_exclude report
>  - exclude -> to_exclude report
>  - include -> block report
>  - exclude -> block report
>  - exclude timeout (move to include + entry deletion)
>  - S,G port entry automatic add to a *,G,exclude port
> 
> The variable names and set notation are the same as per RFC 3376,
> for more information check RFC 3376 sections 4.2.15 and 6.4.1.
> MLDv2 tests will be added by a separate patch-set.
Applied, thanks Nik!

Linux Ethernet Bridging - Oct 2020 - [Bridge] [PATCH net-next 01/16] selftests: net: bridge: rename current igmp tests to igmpv2

[Bridge] [PATCH net-next 00/16] selftests: net: bridge: add tests for IGMPv3

[Bridge] [PATCH net-next 01/16] selftests: net: bridge: rename current igmp tests to igmpv2

[Bridge] [PATCH net-next 02/16] selftests: net: bridge: igmp: add support for packet source address

[Bridge] [PATCH net-next 03/16] selftests: net: bridge: igmp: check for specific udp ip protocol

[Bridge] [PATCH net-next 04/16] selftests: net: bridge: igmp: add IGMPv3 entries' state helpers

[Bridge] [PATCH net-next 05/16] selftests: net: bridge: add tests for igmpv3 is_include and inc -> allow reports

[Bridge] [PATCH net-next 06/16] selftests: net: bridge: add test for igmpv3 inc -> is_include report

[Bridge] [PATCH net-next 07/16] selftests: net: bridge: add test for igmpv3 inc -> is_exclude report

[Bridge] [PATCH net-next 08/16] selftests: net: bridge: add test for igmpv3 inc -> to_exclude report

[Bridge] [PATCH net-next 09/16] selftests: net: bridge: add test for igmpv3 exc -> allow report

[Bridge] [PATCH net-next 10/16] selftests: net: bridge: add test for igmpv3 exc -> is_include report

[Bridge] [PATCH net-next 11/16] selftests: net: bridge: add test for igmpv3 exc -> is_exclude report

[Bridge] [PATCH net-next 12/16] selftests: net: bridge: add test for igmpv3 exc -> to_exclude report

[Bridge] [PATCH net-next 13/16] selftests: net: bridge: add test for igmpv3 inc -> block report

[Bridge] [PATCH net-next 14/16] selftests: net: bridge: add test for igmpv3 exc -> block report

[Bridge] [PATCH net-next 15/16] selftests: net: bridge: add test for igmpv3 exclude timeout

[Bridge] [PATCH net-next 16/16] selftests: net: bridge: add test for igmpv3 *, g auto-add

[Bridge] [PATCH net-next 00/16] selftests: net: bridge: add tests for IGMPv3