Rafał Miłecki
2018-Mar-14 16:58 UTC
[Bridge] [PATCH] brcmfmac: drop Inter-Access Point Protocol packets by default
On 2018-03-14 13:58, Arend van Spriel wrote:> On 3/14/2018 12:01 PM, Rafa? Mi?ecki wrote: >> From: Rafa? Mi?ecki <rafal at milecki.pl> >> >> Testing brcmfmac with more recent firmwares resulted in AP interfaces >> not working in some specific setups. Debugging resulted in discovering >> support for IAPP in Broadcom's firmwares. This is an obsoleted >> standard >> and its implementation is something that: >> 1) Most people don't need / want to use >> 2) Can allow local DoS attacks >> 3) Breaks AP interfaces in some specific bridge setups >> >> To solve issues it can cause this commit modifies brcmfmac to drop >> IAPP >> packets. If affects: >> 1) Rx path: driver won't be sending these unwanted packets up. >> 2) Tx path: driver will reject packets that would trigger STA >> disassociation perfromed by a firmware (possible local DoS >> attack). >> >> It appears there are some Broadcom's clients/users who care about this >> feature despite the drawbacks. They can switch it on by a newly added >> Kconfig option. > > Thanks for taking this approach. Looks fine except for .... (see below) > > Reviewed-by: Arend van Spriel <arend.vanspriel at broadcom.com> >> Signed-off-by: Rafa? Mi?ecki <rafal at milecki.pl> >> --- >> drivers/net/wireless/broadcom/brcm80211/Kconfig | 20 +++++++++++ >> .../wireless/broadcom/brcm80211/brcmfmac/core.c | 39 >> ++++++++++++++++++++++ >> 2 files changed, 59 insertions(+) >> >> diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig >> b/drivers/net/wireless/broadcom/brcm80211/Kconfig >> index 9d99eb42d917..876787ef991a 100644 >> --- a/drivers/net/wireless/broadcom/brcm80211/Kconfig >> +++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig >> @@ -68,6 +68,26 @@ config BRCMFMAC_PCIE >> IEEE802.11ac embedded FullMAC WLAN driver. Say Y if you want to >> use the driver for an PCIE wireless card. >> >> +config BRCMFMAC_IAPP >> + bool "Partial support for obsoleted Inter-Access Point Protocol" >> + depends on BRCMFMAC >> + ---help--- >> + Most of Broadcom's firmwares can send 802.11f ADD frame every >> + time new STA connects to the AP interface. Some recent ones >> + can also disassociate STA when they receive such a frame. > > I do not see any evidence that this would occur only for recent > firmware. That stuff is old and not touched recently.My evidence is comparing firmwares for 4366b1: 10.10.69.3309 (r610991) vs. 10.10 (TOB) (r663589). The first one is from linux-firmware.git and it doesn't implement IAPP in the TX path. The later one is what I got from you privately and it implements it. Also a firmware for 4366c0: 10.10.122.20 (r683106) which is relatively new implements IAPP in the TX path.>> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c >> b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c >> index 19048526b4af..db6987015fb1 100644 >> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c >> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c > > [...] > >> static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, >> struct net_device *ndev) >> { >> @@ -250,6 +278,12 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct >> sk_buff *skb, >> goto done; >> } >> >> + if (!IS_ENABLED(CONFIG_BRCMFMAC_IAPP) && brcmf_skb_is_iapp(skb)) { >> + dev_kfree_skb(skb); >> + ret = -EINVAL; >> + goto done; >> + } > > This is not right. The function must return netdev_tx_t type. Here is > kerneldoc of .start_xmit(): > > * netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, > * struct net_device *dev); > * Called when a packet needs to be transmitted. > * Returns NETDEV_TX_OK. Can return NETDEV_TX_BUSY, but you should > stop > * the queue before that can happen; it's for obsolete devices and > weird > * corner cases, but the stack really does a non-trivial amount > * of useless work if you return NETDEV_TX_BUSY. > * Required; cannot be NULL.Please take a closer look at how brcmf_netdev_start_xmit() works. Above code *will* return netdev_tx_t.> You may want to increase dropped netstat or add driver internal > statistic counter so there is visibility of IAPP packets being > dropped.OK, I'll try to find a stat to increase.
Rafał Miłecki
2018-Mar-14 20:43 UTC
[Bridge] [PATCH] brcmfmac: drop Inter-Access Point Protocol packets by default
On 2018-03-14 16:39, Rafa? Mi?ecki wrote:> On 2018-03-14 13:58, Arend van Spriel wrote: >> On 3/14/2018 12:01 PM, Rafa? Mi?ecki wrote: >>> From: Rafa? Mi?ecki <rafal at milecki.pl> >>> >>> Testing brcmfmac with more recent firmwares resulted in AP interfaces >>> not working in some specific setups. Debugging resulted in >>> discovering >>> support for IAPP in Broadcom's firmwares. This is an obsoleted >>> standard >>> and its implementation is something that: >>> 1) Most people don't need / want to use >>> 2) Can allow local DoS attacks >>> 3) Breaks AP interfaces in some specific bridge setups >>> >>> To solve issues it can cause this commit modifies brcmfmac to drop >>> IAPP >>> packets. If affects: >>> 1) Rx path: driver won't be sending these unwanted packets up. >>> 2) Tx path: driver will reject packets that would trigger STA >>> disassociation perfromed by a firmware (possible local DoS >>> attack). >>> >>> It appears there are some Broadcom's clients/users who care about >>> this >>> feature despite the drawbacks. They can switch it on by a newly added >>> Kconfig option. >> >> Thanks for taking this approach. Looks fine except for .... (see >> below) >> >> Reviewed-by: Arend van Spriel <arend.vanspriel at broadcom.com> >>> Signed-off-by: Rafa? Mi?ecki <rafal at milecki.pl> >>> --- >>> drivers/net/wireless/broadcom/brcm80211/Kconfig | 20 +++++++++++ >>> .../wireless/broadcom/brcm80211/brcmfmac/core.c | 39 >>> ++++++++++++++++++++++ >>> 2 files changed, 59 insertions(+) >>> >>> diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig >>> b/drivers/net/wireless/broadcom/brcm80211/Kconfig >>> index 9d99eb42d917..876787ef991a 100644 >>> --- a/drivers/net/wireless/broadcom/brcm80211/Kconfig >>> +++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig >>> @@ -68,6 +68,26 @@ config BRCMFMAC_PCIE >>> IEEE802.11ac embedded FullMAC WLAN driver. Say Y if you want to >>> use the driver for an PCIE wireless card. >>> >>> +config BRCMFMAC_IAPP >>> + bool "Partial support for obsoleted Inter-Access Point Protocol" >>> + depends on BRCMFMAC >>> + ---help--- >>> + Most of Broadcom's firmwares can send 802.11f ADD frame every >>> + time new STA connects to the AP interface. Some recent ones >>> + can also disassociate STA when they receive such a frame. >> >> I do not see any evidence that this would occur only for recent >> firmware. That stuff is old and not touched recently. > > My evidence is comparing firmwares for 4366b1: 10.10.69.3309 (r610991) > vs. 10.10 (TOB) (r663589). > > The first one is from linux-firmware.git and it doesn't implement IAPP > in the TX path. The later one is what I got from you privately and it > implements it. > > Also a firmware for 4366c0: 10.10.122.20 (r683106) which is relatively > new implements IAPP in the TX path. > > >>> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c >>> b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c >>> index 19048526b4af..db6987015fb1 100644 >>> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c >>> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c >> >> [...] >> >>> static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, >>> struct net_device *ndev) >>> { >>> @@ -250,6 +278,12 @@ static netdev_tx_t >>> brcmf_netdev_start_xmit(struct sk_buff *skb, >>> goto done; >>> } >>> >>> + if (!IS_ENABLED(CONFIG_BRCMFMAC_IAPP) && brcmf_skb_is_iapp(skb)) { >>> + dev_kfree_skb(skb); >>> + ret = -EINVAL; >>> + goto done; >>> + } >> >> This is not right. The function must return netdev_tx_t type. Here is >> kerneldoc of .start_xmit(): >> >> * netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, >> * struct net_device *dev); >> * Called when a packet needs to be transmitted. >> * Returns NETDEV_TX_OK. Can return NETDEV_TX_BUSY, but you should >> stop >> * the queue before that can happen; it's for obsolete devices and >> weird >> * corner cases, but the stack really does a non-trivial amount >> * of useless work if you return NETDEV_TX_BUSY. >> * Required; cannot be NULL. > > Please take a closer look at how brcmf_netdev_start_xmit() works. Above > code *will* return netdev_tx_t. > > >> You may want to increase dropped netstat or add driver internal >> statistic counter so there is visibility of IAPP packets being >> dropped. > > OK, I'll try to find a stat to increase.So after checking brcmf_netdev_start_xmit() again, I realized I actually *do* that. Doing: ret = -EINVAL; goto done; results in increasing tx_dropped.