蔡立三
2008-Dec-08 13:32 UTC
[Bridge] Hello, I meet a problem, I help you can give me some advice
Dear sir: I have met a problem. The situation is that, I port bridge-utils to a Embedded linux system. It works well. I can use brctl command to add a bridge. And I implement the blow command. ./brctl addbr br0 ./brctl stp br0 off ./brctl addif br0 eth0 ./brctl addif br0 wlan0 ifconfig eth0 down ifconfig wlan0 down ifconfig eth0 0.0.0.0 up ifconfig wlan0 0.0.0.0 up ifconfig br0 192.168.1.3 netmask 255.255.255.0 echo "1" > /proc/sys/net/ipv4/ip_forward cat /proc/sys/net/ipv4/ip_forward route add default gw 192.168.1.1 route The command execute correctly. But I cannot ping through it. I can just ping from the wireless terminal to br0 and ping from the wired terminal to br0. The wireless terminal cannot ping to wired terminal through br0. the version of linux system is 2.6.8.1 and the version of the bridge-utils is 1.0.6 I hope you can give me some advice. Thank you. sincerely Cai Lisan -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.linux-foundation.org/pipermail/bridge/attachments/20081208/7b732158/attachment.htm