Greetings Martin,
> Sent: Wednesday, August 11, 2021 at 6:08 PM
> From: "daggs" <daggs at gmx.com>
> To: "Martin Kletzander" <mkletzan at redhat.com>
> Cc: dan at berrange.com, libvirt-users at redhat.com
> Subject: Re: issues with vm after upgrade
>
> Greetings Martin,
>
> > Sent: Wednesday, August 11, 2021 at 4:13 PM
> > From: "Martin Kletzander" <mkletzan at redhat.com>
> > To: "daggs" <daggs at gmx.com>
> > Cc: dan at berrange.com, libvirt-users at redhat.com
> > Subject: Re: issues with vm after upgrade
> >
> > On Wed, Aug 11, 2021 at 03:09:34PM +0200, daggs wrote:
> > >Greetings Martin,
> > >
> > >> Sent: Wednesday, August 11, 2021 at 10:14 AM
> > >> From: "Martin Kletzander" <mkletzan at
redhat.com>
> > >> To: "daggs" <daggs at gmx.com>
> > >> Cc: dan at berrange.com, libvirt-users at redhat.com
> > >> Subject: Re: issues with vm after upgrade
> > >>
> > >> On Tue, Aug 10, 2021 at 09:21:00PM +0200, daggs wrote:
> > >> >Greetings Martin, Dan
> > >> >
> > >> >> Sent: Wednesday, August 04, 2021 at 1:54 PM
> > >> >> From: "daggs" <daggs at gmx.com>
> > >> >> To: "Martin Kletzander" <mkletzan at
redhat.com>
> > >> >> Cc: libvirt-users at redhat.com, dan at berrange.com
> > >> >> Subject: Re: issues with vm after upgrade
> > >> >>
> > >> >> Greetings Martin,
> > >> >>
> > >> >> > Sent: Wednesday, August 04, 2021 at 11:52 AM
> > >> >> > From: "Martin Kletzander"
<mkletzan at redhat.com>
> > >> >> > To: "daggs" <daggs at gmx.com>
> > >> >> > Cc: libvirt-users at redhat.com, dan at
berrange.com
> > >> >> > Subject: Re: issues with vm after upgrade
> > >> >> >
> > >> >> > On Wed, Aug 04, 2021 at 10:30:29AM +0200, daggs
wrote:
> > >> >> > >Greetings Martin ,
> > >> >> > >
> > >> >> > >> Sent: Wednesday, August 04, 2021 at
11:11 AM
> > >> >> > >> From: "Martin Kletzander"
<mkletzan at redhat.com>
> > >> >> > >> To: "daggs" <daggs at
gmx.com>
> > >> >> > >> Cc: libvirt-users at redhat.com, dan
at berrange.com
> > >> >> > >> Subject: Re: issues with vm after
upgrade
> > >> >> > >>
> > >> >> > >> On Tue, Aug 03, 2021 at 08:47:20PM
+0200, daggs wrote:
> > >> >> > >> >> Sent: Tuesday, August 03,
2021 at 6:51 PM
> > >> >> > >> >> From: "daggs"
<daggs at gmx.com>
> > >> >> > >> >> To: dan at berrange.com
> > >> >> > >> >> Cc: "Martin
Kletzander" <mkletzan at redhat.com>, libvirt-users at redhat.com
> > >> >> > >> >> Subject: Re: issues with vm
after upgrade
> > >> >> > >> >>
> > >> >> > >> >> Greetings Daniel,
> > >> >> > >> >>
> > >> >> > >> >> > Sent: Tuesday, August
03, 2021 at 6:39 PM
> > >> >> > >> >> > From: "Daniel P.
Berrange" <dan at berrange.com>
> > >> >> > >> >> > To: "daggs"
<daggs at gmx.com>
> > >> >> > >> >> > Cc: "Martin
Kletzander" <mkletzan at redhat.com>, libvirt-users at redhat.com
> > >> >> > >> >> > Subject: Re: issues with
vm after upgrade
> > >> >> > >> >> >
> > >> >> > >> >> > On Tue, Aug 03, 2021 at
05:34:53PM +0200, daggs wrote:
> > >> >> > >> >> > > > Sent: Tuesday,
August 03, 2021 at 6:29 PM
> > >> >> > >> >> > > > From:
"Daniel P. Berrange" <dan at berrange.com>
> > >> >> > >> >> > > > To:
"daggs" <daggs at gmx.com>
> > >> >> > >> >> > > > Cc:
"Martin Kletzander" <mkletzan at redhat.com>, libvirt-users at
redhat.com
> > >> >> > >> >> > > > Subject: Re:
issues with vm after upgrade
> > >> >> > >> >> > > >
> > >> >> > >> >> > > > On Tue, Aug
03, 2021 at 05:21:52PM +0200, daggs wrote:
> > >> >> > >> >> > > > > Greetings
Daniel,
> > >> >> > >> >> > > > >
> > >> >> > >> >> > > > > >
Sent: Tuesday, August 03, 2021 at 4:12 PM
> > >> >> > >> >> > > > > >
From: "Daniel P. Berrange" <dan at berrange.com>
> > >> >> > >> >> > > > > > To:
"daggs" <daggs at gmx.com>
> > >> >> > >> >> > > > > > Cc:
"Martin Kletzander" <mkletzan at redhat.com>, libvirt-users at
redhat.com
> > >> >> > >> >> > > > > >
Subject: Re: issues with vm after upgrade
> > >> >> > >> >> > > > > >
> > >> >> > >> >> > > > > > The
<audio> element just refers to the *host* backend used for audio
> > >> >> > >> >> > > > > >
playback. It would not affect guest hardware. Further, this has always
> > >> >> > >> >> > > > > >
existed - it just wasn't exposed in the XML previously.
> > >> >> > >> >> > > > > >
> > >> >> > >> >> > > > > >
> > >> >> > >> >> > > > >
> > >> >> > >> >> > > > > the
upgrade changed something, here is the qemu cmd before the upgrade:
https://dpaste.com/F2N5T8CT8
> > >> >> > >> >> > > > > here is
after https://dpaste.com/F2N5T8CT8
> > >> >> > >> >> > > >
> > >> >> > >> >> > > > Those links
are both the same I'm afraid
> > >> >> > >> >> > > >
> > >> >> > >> >> > >
> > >> >> > >> >> > > Duh! my bad!
> > >> >> > >> >> > > good log:
http://dpaste.com/F2N5T8CT8
> > >> >> > >> >> > > bad log:
http://dpaste.com/6ECUHD2J8
> > >> >> > >> >> >
> > >> >> > >> >> > The new log has a CLI
flag
> > >> >> > >> >> >
> > >> >> > >> >> > -audiodev
id=audio1,driver=none
> > >> >> > >> >> >
> > >> >> > >> >> > but the old log has an
env variable
> > >> >> > >> >> >
> > >> >> > >> >> > QEMU_AUDIO_DRV=none
> > >> >> > >> >> >
> > >> >> > >> >> > which should be
functionally identical, as QEMU will parse them both
> > >> >> > >> >> > to the same internal
config.
> > >> >> > >> >> >
> > >> >> > >> >> > The obvious difference
in the logs which can cause your guest to fail
> > >> >> > >> >> > is the different QEMU
version. The old log shows QEMU 5.2.0, while the
> > >> >> > >> >> > new log shows QEMU 6.0.0
> > >> >> > >> >> >
> > >> >> > >> >>
> > >> >> > >> >> thanks for the help, I went
to look why the efi fw and found out that the nvram entry in
/etc/libvirt/eqmu.conf was deleted upon update.
> > >> >> > >> >> I'm sure fixing this will
solve he boot issue, hopefully audio issue too.
> > >> >> > >> >>
> > >> >> > >> >> Thanks,
> > >> >> > >> >>
> > >> >> > >> >> Dagg.
> > >> >> > >> >>
> > >> >> > >> >
> > >> >> > >> >unfortunately, that didn't
helped, vm still wont come up, latest log at http://dpaste.com/2XZA4VQZA
> > >> >> > >> >any ideas?
> > >> >> > >> >
> > >> >> > >>
> > >> >> > >> Seems like the issue is:
> > >> >> > >>
> > >> >> > >> 2021-07-16T10:29:19.259409Z
qemu-system-x86_64: vfio: Cannot reset device 0000:00:1f.3, no available reset
mechanism.
> > >> >> > >> 2021-07-16T10:29:19.369391Z
qemu-system-x86_64: vfio: Cannot reset device 0000:00:1f.3, no available reset
mechanism.
> > >> >> > >>
> > >> >> > >> did you upgrade anything else?
> > >> >> > >>
> > >> >> > >
> > >> >> > >are you sure? you can see the same prints
in the good log at http://dpaste.com/F2N5T8CT8
> > >> >> > >
> > >> >> >
> > >> >> > Oh, sorry, my bad. Then I do not see why it
would not start. You said
> > >> >> > you managed to make the VM start on your own,
what was the change that
> > >> >> > made it boot? Maybe there's a bug
somewhere in qemu...
> > >> >> >
> > >> >>
> > >> >> since the upgrade I wasn't able to boot it using
libvirt. however the following qemucmd works:
> > >> >> qemu-system-x86_64 \
> > >> >> -machine
pc-q35-5.0,accel=kvm,usb=off,smm=on,dump-guest-core=off \
> > >> >> -cpu host,migratable=on \
> > >> >> -m 15360 \
> > >> >> -smp 4,sockets=1,dies=1,cores=2,threads=2 \
> > >> >> -drive
file=/home/streamer/streamer.img.qcow2.new,if=virtio,format=qcow2 \
> > >> >> -device
vfio-pci,host=0000:00:02.0,romfile=/home/streamer/gpu-8086:5912-uefi.rom,multifunction=on
\
> > >> >> -device
vfio-pci,host=0000:00:1f.3,multifunction=on \
> > >> >> -usb \
> > >> >> -device
usb-host,vendorid=0x046d,productid=0xc52e \
> > >> >> -device
usb-host,vendorid=0x2548,productid=0x1002 \
> > >> >> -display none \
> > >> >> -netdev
tap,id=hostnet0,ifname=virtsw-streamer,script=no,downscript=no \
> > >> >> -device
e1000e,netdev=hostnet0,id=net0,mac=52:54:00:5a:4c:8c \
> > >> >> -blockdev
'{"driver":"file","filename":"/usr/share/edk2-ovmf/OVMF_CODE.secboot.fd","node-name":"libvirt-pflash0-storage","auto-read-only":true,"discard":"unmap"}'
\
> > >> >> -blockdev
'{"driver":"file","filename":"/var/lib/libvirt/qemu/nvram/streamer-vm-q35_VARS.fd","node-name":"libvirt-pflash1-storage","auto-readonly":true,"discard":"unmap"}'
> > >> >>
> > >> >> Dagg
> > >> >>
> > >> >
> > >> >I was able to get the vm running again by creating the
xml again. the only issue I'm facing is the fact that only the one playback
device is visible:
> > >> >**** List of PLAYBACK Hardware Devices ****
> > >> >card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog
[ALC892 Analog]
> > >> > Subdevices: 1/1
> > >> > Subdevice #0: subdevice #0
> > >> >prior to the upgrade I had hdmi entries too.
> > >> >I've check with two different oses and the issue
persists.
> > >> >as mentioned before, if I drop this line: -audiodev
id=audio1,driver=none from the cmd, I see all the playback channels.
> > >> >
> > >> >any idea?
> > >> >
> > >>
> > >> So to clean up this thread let me reply to the two issues
separately.
> > >>
> > >> 1) if your device-assigned audio is not visible with
'-audiodev
> > >> id=audio1,driver=none', but *is* visible with
QEMU_AUDIO_DRV=none,
> > >> then that is a bug in QEMU and needs to be dealt with
there.
> > >I'll ping the eqmu devs on this.
> > >
> > >>
> > >> 2) To your issue with starting the domain it would be good to
know what
> > >> is the error you get from virsh (or however you are
starting the
> > >> domain) and the debug logs of libvirtd, ideally just for
the part of
> > >> the domain starting.
> > >that is the issue, there wasn't any error. the vm just
didn't booted.
> >
> > Oh, so I misunderstood. What was the state of the VM in libvirt?
> > "paused" or "running"? Was there serial console
working?
> it was marked as running and there was no serial
>
> >
> > >I can diff the original xml with the new one to see the diffs and
post them here if you wish
> > >
> >
> > Would be nice to see if there are any differences. The newly created
> > one works then?
> >
>
> I'll sent it later today
>
here: https://dpaste.com/5VBUU8Z9W