libvirt users - Oct 2017 - Re: terminating on signal 15 from pid 2146 (/usr/sbin/libvirtd)

2017-10-20 14:59 GMT+03:00 Martin Kletzander
<mkletzan@redhat.com>:
> On Thu, Oct 19, 2017 at 09:11:00PM +0300, Matwey V. Kornilov wrote:
>>
>> Hello,
>>
>> I use libvirt 3.3.0 and qemu 2.9.0
>>
>> My domain XML spec is the following:
>>
>> <domain type='qemu'>
>>  <name>s390_generic</name>
>>  <uuid>82b4d16e-b636-447e-9fda-41d44616bce8</uuid>
>>  <memory unit='KiB'>1048576</memory>
>>  <currentMemory unit='KiB'>1048576</currentMemory>
>>  <vcpu placement='static'>1</vcpu>
>>  <os>
>>    <type arch='s390x'
machine='s390-ccw-virtio-2.9'>hvm</type>
>>    <boot dev='hd'/>
>>  </os>
>>  <clock offset='utc'/>
>>  <on_poweroff>destroy</on_poweroff>
>>  <on_reboot>restart</on_reboot>
>>  <on_crash>destroy</on_crash>
>>  <devices>
>>    <emulator>/usr/bin/qemu-system-s390x</emulator>
>>    <disk type='block' device='disk'>
>>      <driver name='qemu' type='raw'
cache='none' io='native'/>
>>      <source dev='/dev/lvm_pda/libvirt_s390'/>
>>      <target dev='vda' bus='virtio'/>
>>      <address type='ccw' cssid='0xfe'
ssid='0x0' devno='0x0000'/>
>>    </disk>
>>    <disk type='file' device='cdrom'>
>>      <driver name='qemu' type='raw'/>
>>      <target dev='sda' bus='scsi'/>
>>      <readonly/>
>>      <address type='drive' controller='0'
bus='0' target='0' unit='0'/>
>>    </disk>
>>    <controller type='scsi' index='0'
model='virtio-scsi'>
>>      <address type='ccw' cssid='0xfe'
ssid='0x0' devno='0x0002'/>
>>    </controller>
>>    <interface type='bridge'>
>>      <mac address='52:54:00:e8:61:7e'/>
>>      <source bridge='br0'/>
>>      <model type='virtio'/>
>>      <address type='ccw' cssid='0xfe'
ssid='0x0' devno='0x0001'/>
>>    </interface>
>>    <console type='pty'>
>>      <target type='sclp' port='0'/>
>>    </console>
>>    <memballoon model='virtio'>
>>      <address type='ccw' cssid='0xfe'
ssid='0x0' devno='0x0003'/>
>>    </memballoon>
>>    <panic model='s390'/>
>>  </devices>
>> </domain>
>>
>> The issue is that when I try to start it, it starts and shutdowns
>> immediately:
>>
>> virsh # start s390_generic
>> Domain s390_generic started
>>
>> virsh #
>>
>> In the domain log file I see the following:
>>
>> 2017-10-19 18:10:21.633+0000: starting up libvirt version: 3.3.0, qemu
>> version: 2.9.0(openSUSE Leap 42.3), hostname: oak.local
>> LC_ALL=C
>> PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
>> QEMU_AUDIO_DRV=none /usr/bin/qemu-system-s390x -name
>> guest=s390_generic,debug-threads=on -S -object
>>
>>
secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-7-s390_generic/master-key.aes
>> -machine s390-ccw-virtio-2.9,accel=tcg,usb=off,dump-guest-core=off -m
>> 1024 -realtime mlock=off -smp 1,sockets=1,cores=1,threads=1 -uuid
>> 82b4d16e-b636-447e-9fda-41d44616bce8 -display none -no-user-config
>> -nodefaults -chardev
>>
>>
socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-7-s390_generic/monitor.sock,server,nowait
>> -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc
>> -no-shutdown -boot strict=on -device
>> virtio-scsi-ccw,id=scsi0,devno=fe.0.0002 -drive
>>
>>
file=/dev/lvm_pda/libvirt_s390,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
>> -device
>>
>>
virtio-blk-ccw,scsi=off,devno=fe.0.0000,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
>> -drive if=none,id=drive-scsi0-0-0-0,readonly=on -device
>>
>>
scsi-cd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0
>> -netdev tap,fd=26,id=hostnet0 -device
>>
>>
virtio-net-ccw,netdev=hostnet0,id=net0,mac=52:54:00:e8:61:7e,devno=fe.0.0001
>> -chardev pty,id=charconsole0 -device
>> sclpconsole,chardev=charconsole0,id=console0 -device
>> virtio-balloon-ccw,id=balloon0,devno=fe.0.0003 -msg timestamp=on
>> 2017-10-19T18:10:21.701184Z qemu-system-s390x: -chardev
>> pty,id=charconsole0: char device redirected to /dev/pts/5 (label
>> charconsole0)
>> 2017-10-19T18:10:21.721299Z qemu-system-s390x: terminating on signal 15
>> from pid 2146 (/usr/sbin/libvirtd)
>> 2017-10-19 18:10:21.985+0000: shutting down, reason=shutdown
>>
>
> You don't have much logging enabled, so there's not that much info.
What's
> in
> the libvirtd.log?  what is the status reason for the domain?  I.e. output
of
> `virsh domstate --reason` ?
How could I increase log level? There is nothing in libvirtd.log.

The reason is shutdown.

virsh # start s390_generic
Domain s390_generic started

virsh # domstate --reason s390_generic
shut off (shutdown)

>
>>
>> What is the issue?
>>
>> _______________________________________________
>> libvirt-users mailing list
>> libvirt-users@redhat.com
>> https://www.redhat.com/mailman/listinfo/libvirt-users


-- 
With best regards,
Matwey V. Kornilov

On Fri, Oct 20, 2017 at 03:07:19PM +0300, Matwey V. Kornilov
wrote:
>2017-10-20 14:59 GMT+03:00 Martin Kletzander <mkletzan@redhat.com>:
>> On Thu, Oct 19, 2017 at 09:11:00PM +0300, Matwey V. Kornilov wrote:
>>>
>>> Hello,
>>>
>>> I use libvirt 3.3.0 and qemu 2.9.0
>>>
>>> My domain XML spec is the following:
>>>
>>> <domain type='qemu'>
>>>  <name>s390_generic</name>
>>>  <uuid>82b4d16e-b636-447e-9fda-41d44616bce8</uuid>
>>>  <memory unit='KiB'>1048576</memory>
>>>  <currentMemory
unit='KiB'>1048576</currentMemory>
>>>  <vcpu placement='static'>1</vcpu>
>>>  <os>
>>>    <type arch='s390x'
machine='s390-ccw-virtio-2.9'>hvm</type>
>>>    <boot dev='hd'/>
>>>  </os>
>>>  <clock offset='utc'/>
>>>  <on_poweroff>destroy</on_poweroff>
>>>  <on_reboot>restart</on_reboot>
>>>  <on_crash>destroy</on_crash>
>>>  <devices>
>>>    <emulator>/usr/bin/qemu-system-s390x</emulator>
>>>    <disk type='block' device='disk'>
>>>      <driver name='qemu' type='raw'
cache='none' io='native'/>
>>>      <source dev='/dev/lvm_pda/libvirt_s390'/>
>>>      <target dev='vda' bus='virtio'/>
>>>      <address type='ccw' cssid='0xfe'
ssid='0x0' devno='0x0000'/>
>>>    </disk>
>>>    <disk type='file' device='cdrom'>
>>>      <driver name='qemu' type='raw'/>
>>>      <target dev='sda' bus='scsi'/>
>>>      <readonly/>
>>>      <address type='drive' controller='0'
bus='0' target='0' unit='0'/>
>>>    </disk>
>>>    <controller type='scsi' index='0'
model='virtio-scsi'>
>>>      <address type='ccw' cssid='0xfe'
ssid='0x0' devno='0x0002'/>
>>>    </controller>
>>>    <interface type='bridge'>
>>>      <mac address='52:54:00:e8:61:7e'/>
>>>      <source bridge='br0'/>
>>>      <model type='virtio'/>
>>>      <address type='ccw' cssid='0xfe'
ssid='0x0' devno='0x0001'/>
>>>    </interface>
>>>    <console type='pty'>
>>>      <target type='sclp' port='0'/>
>>>    </console>
>>>    <memballoon model='virtio'>
>>>      <address type='ccw' cssid='0xfe'
ssid='0x0' devno='0x0003'/>
>>>    </memballoon>
>>>    <panic model='s390'/>
>>>  </devices>
>>> </domain>
>>>
>>> The issue is that when I try to start it, it starts and shutdowns
>>> immediately:
>>>
>>> virsh # start s390_generic
>>> Domain s390_generic started
>>>
>>> virsh #
>>>
>>> In the domain log file I see the following:
>>>
>>> 2017-10-19 18:10:21.633+0000: starting up libvirt version: 3.3.0,
qemu
>>> version: 2.9.0(openSUSE Leap 42.3), hostname: oak.local
>>> LC_ALL=C
>>> PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
>>> QEMU_AUDIO_DRV=none /usr/bin/qemu-system-s390x -name
>>> guest=s390_generic,debug-threads=on -S -object
>>>
>>>
secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-7-s390_generic/master-key.aes
>>> -machine s390-ccw-virtio-2.9,accel=tcg,usb=off,dump-guest-core=off
-m
>>> 1024 -realtime mlock=off -smp 1,sockets=1,cores=1,threads=1 -uuid
>>> 82b4d16e-b636-447e-9fda-41d44616bce8 -display none -no-user-config
>>> -nodefaults -chardev
>>>
>>>
socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-7-s390_generic/monitor.sock,server,nowait
>>> -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc
>>> -no-shutdown -boot strict=on -device
>>> virtio-scsi-ccw,id=scsi0,devno=fe.0.0002 -drive
>>>
>>>
file=/dev/lvm_pda/libvirt_s390,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
>>> -device
>>>
>>>
virtio-blk-ccw,scsi=off,devno=fe.0.0000,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
>>> -drive if=none,id=drive-scsi0-0-0-0,readonly=on -device
>>>
>>>
scsi-cd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0
>>> -netdev tap,fd=26,id=hostnet0 -device
>>>
>>>
virtio-net-ccw,netdev=hostnet0,id=net0,mac=52:54:00:e8:61:7e,devno=fe.0.0001
>>> -chardev pty,id=charconsole0 -device
>>> sclpconsole,chardev=charconsole0,id=console0 -device
>>> virtio-balloon-ccw,id=balloon0,devno=fe.0.0003 -msg timestamp=on
>>> 2017-10-19T18:10:21.701184Z qemu-system-s390x: -chardev
>>> pty,id=charconsole0: char device redirected to /dev/pts/5 (label
>>> charconsole0)
>>> 2017-10-19T18:10:21.721299Z qemu-system-s390x: terminating on
signal 15
>>> from pid 2146 (/usr/sbin/libvirtd)
>>> 2017-10-19 18:10:21.985+0000: shutting down, reason=shutdown
>>>
>>
>> You don't have much logging enabled, so there's not that much
info.  What's
>> in
>> the libvirtd.log?  what is the status reason for the domain?  I.e.
output of
>> `virsh domstate --reason` ?
>
>How could I increase log level? There is nothing in libvirtd.log.
>
https://wiki.libvirt.org/page/DebugLogs

2017-10-20 17:14 GMT+03:00 Matwey V. Kornilov
<matwey.kornilov@gmail.com>:
> 2017-10-20 15:16 GMT+03:00 Martin Kletzander <mkletzan@redhat.com>:
>> On Fri, Oct 20, 2017 at 03:07:19PM +0300, Matwey V. Kornilov wrote:
>>>
>>> 2017-10-20 14:59 GMT+03:00 Martin Kletzander
<mkletzan@redhat.com>:
>>>>
>>>> On Thu, Oct 19, 2017 at 09:11:00PM +0300, Matwey V. Kornilov
wrote:
>>>>>
>>>>>
>>>>> Hello,
>>>>>
>>>>> I use libvirt 3.3.0 and qemu 2.9.0
>>>>>
>>>>> My domain XML spec is the following:
>>>>>
>>>>> <domain type='qemu'>
>>>>>  <name>s390_generic</name>
>>>>> 
<uuid>82b4d16e-b636-447e-9fda-41d44616bce8</uuid>
>>>>>  <memory unit='KiB'>1048576</memory>
>>>>>  <currentMemory
unit='KiB'>1048576</currentMemory>
>>>>>  <vcpu placement='static'>1</vcpu>
>>>>>  <os>
>>>>>    <type arch='s390x'
machine='s390-ccw-virtio-2.9'>hvm</type>
>>>>>    <boot dev='hd'/>
>>>>>  </os>
>>>>>  <clock offset='utc'/>
>>>>>  <on_poweroff>destroy</on_poweroff>
>>>>>  <on_reboot>restart</on_reboot>
>>>>>  <on_crash>destroy</on_crash>
>>>>>  <devices>
>>>>>   
<emulator>/usr/bin/qemu-system-s390x</emulator>
>>>>>    <disk type='block' device='disk'>
>>>>>      <driver name='qemu' type='raw'
cache='none' io='native'/>
>>>>>      <source
dev='/dev/lvm_pda/libvirt_s390'/>
>>>>>      <target dev='vda' bus='virtio'/>
>>>>>      <address type='ccw' cssid='0xfe'
ssid='0x0' devno='0x0000'/>
>>>>>    </disk>
>>>>>    <disk type='file' device='cdrom'>
>>>>>      <driver name='qemu' type='raw'/>
>>>>>      <target dev='sda' bus='scsi'/>
>>>>>      <readonly/>
>>>>>      <address type='drive'
controller='0' bus='0' target='0' unit='0'/>
>>>>>    </disk>
>>>>>    <controller type='scsi' index='0'
model='virtio-scsi'>
>>>>>      <address type='ccw' cssid='0xfe'
ssid='0x0' devno='0x0002'/>
>>>>>    </controller>
>>>>>    <interface type='bridge'>
>>>>>      <mac address='52:54:00:e8:61:7e'/>
>>>>>      <source bridge='br0'/>
>>>>>      <model type='virtio'/>
>>>>>      <address type='ccw' cssid='0xfe'
ssid='0x0' devno='0x0001'/>
>>>>>    </interface>
>>>>>    <console type='pty'>
>>>>>      <target type='sclp' port='0'/>
>>>>>    </console>
>>>>>    <memballoon model='virtio'>
>>>>>      <address type='ccw' cssid='0xfe'
ssid='0x0' devno='0x0003'/>
>>>>>    </memballoon>
>>>>>    <panic model='s390'/>
>>>>>  </devices>
>>>>> </domain>
>>>>>
>>>>> The issue is that when I try to start it, it starts and
shutdowns
>>>>> immediately:
>>>>>
>>>>> virsh # start s390_generic
>>>>> Domain s390_generic started
>>>>>
>>>>> virsh #
>>>>>
>>>>> In the domain log file I see the following:
>>>>>
>>>>> 2017-10-19 18:10:21.633+0000: starting up libvirt version:
3.3.0, qemu
>>>>> version: 2.9.0(openSUSE Leap 42.3), hostname: oak.local
>>>>> LC_ALL=C
>>>>>
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
>>>>> QEMU_AUDIO_DRV=none /usr/bin/qemu-system-s390x -name
>>>>> guest=s390_generic,debug-threads=on -S -object
>>>>>
>>>>>
>>>>>
secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-7-s390_generic/master-key.aes
>>>>> -machine
s390-ccw-virtio-2.9,accel=tcg,usb=off,dump-guest-core=off -m
>>>>> 1024 -realtime mlock=off -smp 1,sockets=1,cores=1,threads=1
-uuid
>>>>> 82b4d16e-b636-447e-9fda-41d44616bce8 -display none
-no-user-config
>>>>> -nodefaults -chardev
>>>>>
>>>>>
>>>>>
socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-7-s390_generic/monitor.sock,server,nowait
>>>>> -mon chardev=charmonitor,id=monitor,mode=control -rtc
base=utc
>>>>> -no-shutdown -boot strict=on -device
>>>>> virtio-scsi-ccw,id=scsi0,devno=fe.0.0002 -drive
>>>>>
>>>>>
>>>>>
file=/dev/lvm_pda/libvirt_s390,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
>>>>> -device
>>>>>
>>>>>
>>>>>
virtio-blk-ccw,scsi=off,devno=fe.0.0000,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
>>>>> -drive if=none,id=drive-scsi0-0-0-0,readonly=on -device
>>>>>
>>>>>
>>>>>
scsi-cd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0
>>>>> -netdev tap,fd=26,id=hostnet0 -device
>>>>>
>>>>>
>>>>>
virtio-net-ccw,netdev=hostnet0,id=net0,mac=52:54:00:e8:61:7e,devno=fe.0.0001
>>>>> -chardev pty,id=charconsole0 -device
>>>>> sclpconsole,chardev=charconsole0,id=console0 -device
>>>>> virtio-balloon-ccw,id=balloon0,devno=fe.0.0003 -msg
timestamp=on
>>>>> 2017-10-19T18:10:21.701184Z qemu-system-s390x: -chardev
>>>>> pty,id=charconsole0: char device redirected to /dev/pts/5
(label
>>>>> charconsole0)
>>>>> 2017-10-19T18:10:21.721299Z qemu-system-s390x: terminating
on signal 15
>>>>> from pid 2146 (/usr/sbin/libvirtd)
>>>>> 2017-10-19 18:10:21.985+0000: shutting down,
reason=shutdown
>>>>>
>>>>
>>>> You don't have much logging enabled, so there's not
that much info.
>>>> What's
>>>> in
>>>> the libvirtd.log?  what is the status reason for the domain? 
I.e. output
>>>> of
>>>> `virsh domstate --reason` ?
>>>
>>>
>>> How could I increase log level? There is nothing in libvirtd.log.
>>>
>>
>> https://wiki.libvirt.org/page/DebugLogs
>
> Too much info for me...
>
> --
> With best regards,
> Matwey V. Kornilov


-- 
With best regards,
Matwey V. Kornilov

On Fri, Oct 20, 2017 at 10:12:19PM +0300, Matwey V. Kornilov
wrote:
>2017-10-20 17:14 GMT+03:00 Matwey V. Kornilov
<matwey.kornilov@gmail.com>:
>> 2017-10-20 15:16 GMT+03:00 Martin Kletzander
<mkletzan@redhat.com>:
>>> On Fri, Oct 20, 2017 at 03:07:19PM +0300, Matwey V. Kornilov wrote:
>>>>
>>>> 2017-10-20 14:59 GMT+03:00 Martin Kletzander
<mkletzan@redhat.com>:
>>>>>
>>>>> On Thu, Oct 19, 2017 at 09:11:00PM +0300, Matwey V.
Kornilov wrote:
>>>>>>
>>>>>>
>>>>>> Hello,
>>>>>>
>>>>>> I use libvirt 3.3.0 and qemu 2.9.0
>>>>>>
>>>>>> My domain XML spec is the following:
>>>>>>
>>>>>> <domain type='qemu'>
>>>>>>  <name>s390_generic</name>
>>>>>> 
<uuid>82b4d16e-b636-447e-9fda-41d44616bce8</uuid>
>>>>>>  <memory
unit='KiB'>1048576</memory>
>>>>>>  <currentMemory
unit='KiB'>1048576</currentMemory>
>>>>>>  <vcpu placement='static'>1</vcpu>
>>>>>>  <os>
>>>>>>    <type arch='s390x'
machine='s390-ccw-virtio-2.9'>hvm</type>
>>>>>>    <boot dev='hd'/>
>>>>>>  </os>
>>>>>>  <clock offset='utc'/>
>>>>>>  <on_poweroff>destroy</on_poweroff>
>>>>>>  <on_reboot>restart</on_reboot>
>>>>>>  <on_crash>destroy</on_crash>
>>>>>>  <devices>
>>>>>>   
<emulator>/usr/bin/qemu-system-s390x</emulator>
>>>>>>    <disk type='block'
device='disk'>
>>>>>>      <driver name='qemu' type='raw'
cache='none' io='native'/>
>>>>>>      <source
dev='/dev/lvm_pda/libvirt_s390'/>
>>>>>>      <target dev='vda'
bus='virtio'/>
>>>>>>      <address type='ccw'
cssid='0xfe' ssid='0x0' devno='0x0000'/>
>>>>>>    </disk>
>>>>>>    <disk type='file'
device='cdrom'>
>>>>>>      <driver name='qemu'
type='raw'/>
>>>>>>      <target dev='sda'
bus='scsi'/>
>>>>>>      <readonly/>
>>>>>>      <address type='drive'
controller='0' bus='0' target='0' unit='0'/>
>>>>>>    </disk>
>>>>>>    <controller type='scsi' index='0'
model='virtio-scsi'>
>>>>>>      <address type='ccw'
cssid='0xfe' ssid='0x0' devno='0x0002'/>
>>>>>>    </controller>
>>>>>>    <interface type='bridge'>
>>>>>>      <mac address='52:54:00:e8:61:7e'/>
>>>>>>      <source bridge='br0'/>
>>>>>>      <model type='virtio'/>
>>>>>>      <address type='ccw'
cssid='0xfe' ssid='0x0' devno='0x0001'/>
>>>>>>    </interface>
>>>>>>    <console type='pty'>
>>>>>>      <target type='sclp'
port='0'/>
>>>>>>    </console>
>>>>>>    <memballoon model='virtio'>
>>>>>>      <address type='ccw'
cssid='0xfe' ssid='0x0' devno='0x0003'/>
>>>>>>    </memballoon>
>>>>>>    <panic model='s390'/>
>>>>>>  </devices>
>>>>>> </domain>
>>>>>>
>>>>>> The issue is that when I try to start it, it starts and
shutdowns
>>>>>> immediately:
>>>>>>
>>>>>> virsh # start s390_generic
>>>>>> Domain s390_generic started
>>>>>>
>>>>>> virsh #
>>>>>>
>>>>>> In the domain log file I see the following:
>>>>>>
>>>>>> 2017-10-19 18:10:21.633+0000: starting up libvirt
version: 3.3.0, qemu
>>>>>> version: 2.9.0(openSUSE Leap 42.3), hostname: oak.local
>>>>>> LC_ALL=C
>>>>>>
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
>>>>>> QEMU_AUDIO_DRV=none /usr/bin/qemu-system-s390x -name
>>>>>> guest=s390_generic,debug-threads=on -S -object
>>>>>>
>>>>>>
>>>>>>
secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-7-s390_generic/master-key.aes
>>>>>> -machine
s390-ccw-virtio-2.9,accel=tcg,usb=off,dump-guest-core=off -m
>>>>>> 1024 -realtime mlock=off -smp
1,sockets=1,cores=1,threads=1 -uuid
>>>>>> 82b4d16e-b636-447e-9fda-41d44616bce8 -display none
-no-user-config
>>>>>> -nodefaults -chardev
>>>>>>
>>>>>>
>>>>>>
socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-7-s390_generic/monitor.sock,server,nowait
>>>>>> -mon chardev=charmonitor,id=monitor,mode=control -rtc
base=utc
>>>>>> -no-shutdown -boot strict=on -device
>>>>>> virtio-scsi-ccw,id=scsi0,devno=fe.0.0002 -drive
>>>>>>
>>>>>>
>>>>>>
file=/dev/lvm_pda/libvirt_s390,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
>>>>>> -device
>>>>>>
>>>>>>
>>>>>>
virtio-blk-ccw,scsi=off,devno=fe.0.0000,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
>>>>>> -drive if=none,id=drive-scsi0-0-0-0,readonly=on -device
>>>>>>
>>>>>>
>>>>>>
scsi-cd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0
>>>>>> -netdev tap,fd=26,id=hostnet0 -device
>>>>>>
>>>>>>
>>>>>>
virtio-net-ccw,netdev=hostnet0,id=net0,mac=52:54:00:e8:61:7e,devno=fe.0.0001
>>>>>> -chardev pty,id=charconsole0 -device
>>>>>> sclpconsole,chardev=charconsole0,id=console0 -device
>>>>>> virtio-balloon-ccw,id=balloon0,devno=fe.0.0003 -msg
timestamp=on
>>>>>> 2017-10-19T18:10:21.701184Z qemu-system-s390x: -chardev
>>>>>> pty,id=charconsole0: char device redirected to
/dev/pts/5 (label
>>>>>> charconsole0)
>>>>>> 2017-10-19T18:10:21.721299Z qemu-system-s390x:
terminating on signal 15
>>>>>> from pid 2146 (/usr/sbin/libvirtd)
>>>>>> 2017-10-19 18:10:21.985+0000: shutting down,
reason=shutdown
>>>>>>
>>>>>
>>>>> You don't have much logging enabled, so there's not
that much info.
>>>>> What's
>>>>> in
>>>>> the libvirtd.log?  what is the status reason for the
domain?  I.e. output
>>>>> of
>>>>> `virsh domstate --reason` ?
>>>>
>>>>
>>>> How could I increase log level? There is nothing in
libvirtd.log.
>>>>
>>>
>>> https://wiki.libvirt.org/page/DebugLogs
>>
>> Too much info for me...
>>
We are getting 'shutdown' event from the QEMU process, so this is not
done by
libvirt.  Could you also check the qemu log now that you have debug logs
enabled?