libvirt users - Jul 2017 - Re: Ubuntu 16.04 libvirt-guests.sh [6917] - running guests under URI address default: no running guests

Dominik,

What's the point of including a software to an OS that does not work?

2017-07-08 18:34 GMT+02:00 Dominik Psenner <dpsenner@gmail.com>:
> I just wanted to point out that you're only resolving the symptom, not
the
> actual cause. At the same time I'm afraid that I don't know what
the cause
> of your problems is. If you don't want to run virsh guests you probably
> won't need the service, but then what's the point of having
libvirt-bin
> installed in the first place? :-)
>
> Cheers
>
> 2017-07-07 23:23 GMT+02:00 Jędrek Domański
<jedrek.domanski@gmail.com>:
>
>> Dominik,
>>
>> As far as I am concerned the command provided by Andrea disables
>> libvirt-guests service at boot.
>>
>> jedrek@Home:~$ service libvirt-guests status
>> ● libvirt-guests.service - Suspend Active Libvirt Guests
>>    Loaded: loaded (/lib/systemd/system/libvirt-guests.service;
*disabled*;
>> vendor preset: enabled)
>>    Active: inactive (dead)
>>      Docs: man:libvirtd(8)
>>            http://libvirt.org
>>
>> When you enable/disable a service *sysctemctl *creates a symlink of a
>> service into the location on disk where systemd looks for autostart
files
>> (usually /etc/systemd/system/some_target.target.wants
>>
>> jedrek@Home:~$ ls /etc/systemd/system/ | grep libvirt*
>> libvirtd.service
>>
>> No libvirt-guests.service
>>
>> I know this is just a workaround but what's wrong with this?
>>
>>
>>
>> 2017-07-07 19:13 GMT+02:00 Dominik Psenner <dpsenner@gmail.com>:
>>
>>> Note that this disables the shutdown of libvirt guests when the
host
>>> shuts down.
>>>
>>> 2017-07-07 16:20 GMT+02:00 Jędrek Domański
<jedrek.domanski@gmail.com>:
>>>
>>>> Andrea,
>>>>
>>>> You are a genius!!! :D It's worked :)) Thank yo so much!!!
XD
>>>>
>>>> 2017-07-07 12:14 GMT+02:00 Andrea Bolognani
<abologna@redhat.com>:
>>>>
>>>>> On Fri, 2017-07-07 at 09:46 +0200, Jędrek Domański wrote:
>>>>> > Hi Dominik,
>>>>> >
>>>>> > So what is going on on my computer with the script
libvirt-guests.sh?
>>>>> > Why is it hanging on it? How should I address this
problem?
>>>>>
>>>>> Not sure what the root cause of your problem is, but you
>>>>> can use
>>>>>
>>>>>   # systemctl disable libvirt-guests
>>>>>
>>>>> to verify if the script is really what causes shutdown
>>>>> to hang. It might very well be that it's merely the
last
>>>>> thing producing output before the actual issue occurs.
>>>>>
>>>>> --
>>>>> Andrea Bolognani / Red Hat / Virtualization
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Dominik Psenner
>>>
>>
>>
>
>
> --
> Dominik Psenner
>

You can't expect anyone to step up happily to fix a problem you experience.
If you're unhappy with the open source solution you have at least 4 options:

1. buy a license for red hat
2. get customer support from red hat
3. buy a license for vmware
4. work out why it doesn't work, give feedback to the community and may
even work out a fix that you can give back to the community. with a bit of
luck the overall open source product could evolve into something better.

I feel sorry that I couldn't you help any further. Good luck!

Cheers,
Dominik

2017-07-09 0:38 GMT+02:00 Jędrek Domański <jedrek.domanski@gmail.com>:
> Dominik,
>
> What's the point of including a software to an OS that does not work?
>
> 2017-07-08 18:34 GMT+02:00 Dominik Psenner <dpsenner@gmail.com>:
>
>> I just wanted to point out that you're only resolving the symptom,
not
>> the actual cause. At the same time I'm afraid that I don't know
what the
>> cause of your problems is. If you don't want to run virsh guests
you
>> probably won't need the service, but then what's the point of
having
>> libvirt-bin installed in the first place? :-)
>>
>> Cheers
>>
>> 2017-07-07 23:23 GMT+02:00 Jędrek Domański
<jedrek.domanski@gmail.com>:
>>
>>> Dominik,
>>>
>>> As far as I am concerned the command provided by Andrea disables
>>> libvirt-guests service at boot.
>>>
>>> jedrek@Home:~$ service libvirt-guests status
>>> ● libvirt-guests.service - Suspend Active Libvirt Guests
>>>    Loaded: loaded (/lib/systemd/system/libvirt-guests.service;
>>> *disabled*; vendor preset: enabled)
>>>    Active: inactive (dead)
>>>      Docs: man:libvirtd(8)
>>>            http://libvirt.org
>>>
>>> When you enable/disable a service *sysctemctl *creates a symlink of
a
>>> service into the location on disk where systemd looks for autostart
files
>>> (usually /etc/systemd/system/some_target.target.wants
>>>
>>> jedrek@Home:~$ ls /etc/systemd/system/ | grep libvirt*
>>> libvirtd.service
>>>
>>> No libvirt-guests.service
>>>
>>> I know this is just a workaround but what's wrong with this?
>>>
>>>
>>>
>>> 2017-07-07 19:13 GMT+02:00 Dominik Psenner
<dpsenner@gmail.com>:
>>>
>>>> Note that this disables the shutdown of libvirt guests when the
host
>>>> shuts down.
>>>>
>>>> 2017-07-07 16:20 GMT+02:00 Jędrek Domański
<jedrek.domanski@gmail.com>:
>>>>
>>>>> Andrea,
>>>>>
>>>>> You are a genius!!! :D It's worked :)) Thank yo so
much!!! XD
>>>>>
>>>>> 2017-07-07 12:14 GMT+02:00 Andrea Bolognani
<abologna@redhat.com>:
>>>>>
>>>>>> On Fri, 2017-07-07 at 09:46 +0200, Jędrek Domański
wrote:
>>>>>> > Hi Dominik,
>>>>>> >
>>>>>> > So what is going on on my computer with the script
>>>>>> libvirt-guests.sh?
>>>>>> > Why is it hanging on it? How should I address this
problem?
>>>>>>
>>>>>> Not sure what the root cause of your problem is, but
you
>>>>>> can use
>>>>>>
>>>>>>   # systemctl disable libvirt-guests
>>>>>>
>>>>>> to verify if the script is really what causes shutdown
>>>>>> to hang. It might very well be that it's merely the
last
>>>>>> thing producing output before the actual issue occurs.
>>>>>>
>>>>>> --
>>>>>> Andrea Bolognani / Red Hat / Virtualization
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Dominik Psenner
>>>>
>>>
>>>
>>
>>
>> --
>> Dominik Psenner
>>
>
>

-- 
Dominik Psenner

Yeah, I know. Sorry for my demanding attitude.

Any hints how I could start debugging the problem?

2017-07-09 18:12 GMT+02:00 Dominik Psenner <dpsenner@gmail.com>:
> You can't expect anyone to step up happily to fix a problem you
> experience. If you're unhappy with the open source solution you have at
> least 4 options:
>
> 1. buy a license for red hat
> 2. get customer support from red hat
> 3. buy a license for vmware
> 4. work out why it doesn't work, give feedback to the community and may
> even work out a fix that you can give back to the community. with a bit of
> luck the overall open source product could evolve into something better.
>
> I feel sorry that I couldn't you help any further. Good luck!
>
> Cheers,
> Dominik
>
> 2017-07-09 0:38 GMT+02:00 Jędrek Domański
<jedrek.domanski@gmail.com>:
>
>> Dominik,
>>
>> What's the point of including a software to an OS that does not
work?
>>
>> 2017-07-08 18:34 GMT+02:00 Dominik Psenner <dpsenner@gmail.com>:
>>
>>> I just wanted to point out that you're only resolving the
symptom, not
>>> the actual cause. At the same time I'm afraid that I don't
know what the
>>> cause of your problems is. If you don't want to run virsh
guests you
>>> probably won't need the service, but then what's the point
of having
>>> libvirt-bin installed in the first place? :-)
>>>
>>> Cheers
>>>
>>> 2017-07-07 23:23 GMT+02:00 Jędrek Domański
<jedrek.domanski@gmail.com>:
>>>
>>>> Dominik,
>>>>
>>>> As far as I am concerned the command provided by Andrea
disables
>>>> libvirt-guests service at boot.
>>>>
>>>> jedrek@Home:~$ service libvirt-guests status
>>>> ● libvirt-guests.service - Suspend Active Libvirt Guests
>>>>    Loaded: loaded (/lib/systemd/system/libvirt-guests.service;
>>>> *disabled*; vendor preset: enabled)
>>>>    Active: inactive (dead)
>>>>      Docs: man:libvirtd(8)
>>>>            http://libvirt.org
>>>>
>>>> When you enable/disable a service *sysctemctl *creates a
symlink of a
>>>> service into the location on disk where systemd looks for
autostart files
>>>> (usually /etc/systemd/system/some_target.target.wants
>>>>
>>>> jedrek@Home:~$ ls /etc/systemd/system/ | grep libvirt*
>>>> libvirtd.service
>>>>
>>>> No libvirt-guests.service
>>>>
>>>> I know this is just a workaround but what's wrong with
this?
>>>>
>>>>
>>>>
>>>> 2017-07-07 19:13 GMT+02:00 Dominik Psenner
<dpsenner@gmail.com>:
>>>>
>>>>> Note that this disables the shutdown of libvirt guests when
the host
>>>>> shuts down.
>>>>>
>>>>> 2017-07-07 16:20 GMT+02:00 Jędrek Domański
<jedrek.domanski@gmail.com>
>>>>> :
>>>>>
>>>>>> Andrea,
>>>>>>
>>>>>> You are a genius!!! :D It's worked :)) Thank yo so
much!!! XD
>>>>>>
>>>>>> 2017-07-07 12:14 GMT+02:00 Andrea Bolognani
<abologna@redhat.com>:
>>>>>>
>>>>>>> On Fri, 2017-07-07 at 09:46 +0200, Jędrek Domański
wrote:
>>>>>>> > Hi Dominik,
>>>>>>> >
>>>>>>> > So what is going on on my computer with the
script
>>>>>>> libvirt-guests.sh?
>>>>>>> > Why is it hanging on it? How should I address
this problem?
>>>>>>>
>>>>>>> Not sure what the root cause of your problem is,
but you
>>>>>>> can use
>>>>>>>
>>>>>>>   # systemctl disable libvirt-guests
>>>>>>>
>>>>>>> to verify if the script is really what causes
shutdown
>>>>>>> to hang. It might very well be that it's merely
the last
>>>>>>> thing producing output before the actual issue
occurs.
>>>>>>>
>>>>>>> --
>>>>>>> Andrea Bolognani / Red Hat / Virtualization
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Dominik Psenner
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Dominik Psenner
>>>
>>
>>
>
>
> --
> Dominik Psenner
>