libvirt users - Dec 2016 - Re: How to best I/O performance for Window2008 and MSSQL guest VM

Hi There,

I've moved some Windows2012 with MSSQL VMs from an hold ESXi 5.5 machine
to a more recent and powerful machine running Fedora 24 x86_64 and related
libvirt + KVM
virtualization. I've moved the VMs filesystem to LVM slices and installed
the VirtIO drivers
in to all Windows VMs. I've also set both Disk and Network interface to work
using VirtIO.
So far so good everything works pretty fine. Now I would like to tune at best
the MSSQL VM
for both Disk and Network interfaces in order to get the best performance
possible.

Regarding network interface I've set it to work as bridge instead to go
through to macvtap, so I'm
not sure what is the best in this case.

Regarding disk, since it's LVM I've chosen to go to cache mode none and
IO mode native. Also
here cannot judge what's the best setup for the workload. I'm undecided
to use IO mode threads
along directsync cache mode.

Finally I've set "ionice -c 1 -p <qemu-pid> -n 0" and
"renice -n -10 <qemu-pid>" for the interested
VM that I want to get best performance possible.

Even with the above setup, the MSSQL VM has performance similar to the old
machine running
ESXi 5.5, so does anyone can suggest where too look at and/or what would be the
right setup?

Thanks in advance.
Roberto Fichera

Hi Roberto,

What is the cpu and memory configuration of your guest? Are you
pinning to dedicated CPUs, are you exposing host topology and cpu
features, do you have dedicated I/O threads? Are you backing the guest
memory with hugepages? All of the above will likely increase
performance and minimise noise.

Cheers,

On 6 December 2016 at 05:13, Roberto Fichera <kernel at tekno-soft.it>
wrote:
> Hi There,
>
> I've moved some Windows2012 with MSSQL VMs from an hold ESXi 5.5
machine
> to a more recent and powerful machine running Fedora 24 x86_64 and related
libvirt + KVM
> virtualization. I've moved the VMs filesystem to LVM slices and
installed the VirtIO drivers
> in to all Windows VMs. I've also set both Disk and Network interface to
work using VirtIO.
> So far so good everything works pretty fine. Now I would like to tune at
best the MSSQL VM
> for both Disk and Network interfaces in order to get the best performance
possible.
>
> Regarding network interface I've set it to work as bridge instead to go
through to macvtap, so I'm
> not sure what is the best in this case.
>
> Regarding disk, since it's LVM I've chosen to go to cache mode none
and IO mode native. Also
> here cannot judge what's the best setup for the workload. I'm
undecided to use IO mode threads
> along directsync cache mode.
>
> Finally I've set "ionice -c 1 -p <qemu-pid> -n 0" and
"renice -n -10 <qemu-pid>" for the interested
> VM that I want to get best performance possible.
>
> Even with the above setup, the MSSQL VM has performance similar to the old
machine running
> ESXi 5.5, so does anyone can suggest where too look at and/or what would be
the right setup?
>
> Thanks in advance.
> Roberto Fichera
>
>
> _______________________________________________
> libvirt-users mailing list
> libvirt-users at redhat.com
> https://www.redhat.com/mailman/listinfo/libvirt-users


-- 
Cheers,
~Blairo

On 12/06/2016 06:06 AM, Blair Bethwaite wrote:
> Hi Roberto,
Hi Blair
> What is the cpu and memory configuration of your guest? 
I've set to copy host configuration (16 cores) and memory is set to 24GB,
host has 64GB.
Guest is Windows 2012 64bits version

Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                16
On-line CPU(s) list:   0-15
Thread(s) per core:    2
Core(s) per socket:    8
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 79
Model name:            Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Stepping:              1
CPU MHz:               1200.219
CPU max MHz:           3000.0000
CPU min MHz:           1200.0000
BogoMIPS:              4194.79
Virtualization:        VT-x
L1d cache:             32K
L1i cache:             32K
L2 cache:              256K
L3 cache:              20480K
NUMA node0 CPU(s):     0-15
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr
sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon
pebs bts rep_good nopl xtopology
nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est
tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid
dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c
rdrand lahf_lm abm 3dnowprefetch epb
intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2
smep bmi2 erms invpcid rtm cqm rdseed
adx smap xsaveopt cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida
arat pln pts
> Are you pinning to dedicated CPUs, 
no
> are you exposing host topology and cpu
> features, 
Yes
> do you have dedicated I/O threads? 
if you are talking about disk I/O, no. Should I do that?
> Are you backing the guest memory with hugepages? 
Don't know, how can I check or set it?
> All of the above will likely increase performance and minimise noise.
>
> Cheers,
>
> On 6 December 2016 at 05:13, Roberto Fichera <kernel@tekno-soft.it>
wrote:
>> Hi There,
>>
>> I've moved some Windows2012 with MSSQL VMs from an hold ESXi 5.5
machine
>> to a more recent and powerful machine running Fedora 24 x86_64 and
related libvirt + KVM
>> virtualization. I've moved the VMs filesystem to LVM slices and
installed the VirtIO drivers
>> in to all Windows VMs. I've also set both Disk and Network
interface to work using VirtIO.
>> So far so good everything works pretty fine. Now I would like to tune
at best the MSSQL VM
>> for both Disk and Network interfaces in order to get the best
performance possible.
>>
>> Regarding network interface I've set it to work as bridge instead
to go through to macvtap, so I'm
>> not sure what is the best in this case.
>>
>> Regarding disk, since it's LVM I've chosen to go to cache mode
none and IO mode native. Also
>> here cannot judge what's the best setup for the workload. I'm
undecided to use IO mode threads
>> along directsync cache mode.
>>
>> Finally I've set "ionice -c 1 -p <qemu-pid> -n 0"
and "renice -n -10 <qemu-pid>" for the interested
>> VM that I want to get best performance possible.
>>
>> Even with the above setup, the MSSQL VM has performance similar to the
old machine running
>> ESXi 5.5, so does anyone can suggest where too look at and/or what
would be the right setup?
>>
>> Thanks in advance.
>> Roberto Fichera
>>
>>
>> _______________________________________________
>> libvirt-users mailing list
>> libvirt-users@redhat.com
>> https://www.redhat.com/mailman/listinfo/libvirt-users
>
>