libvirt users - Aug 2014 - Re: Compile error on centos 7 : undefined reference to `virConnectNetworkEventRegisterAnyCheckACL'

> Thanks for the report.  That is disabling quite a lot of drivers (what
> is still left, lxc?), so it's a combination that has not gotten a lot
of
> testing.  I'll definitely look at fixing it before 1.2.8 is released,
> although it may miss release candidate 0.
It's no problem of configure options. Simple ./configure result:

configure:
configure: Configuration summary
configure: ====================configure:
configure: Drivers
configure:
configure:       Xen: no
configure:      QEMU: yes
configure:       UML: yes
configure:    OpenVZ: yes
configure:    VMware: yes
configure:      VBox: yes
configure:    XenAPI: no
configure:  xenlight: no
configure:       LXC: yes
configure:      PHYP: no
configure:       ESX: no
configure:   Hyper-V: no
configure: Parallels: yes
configure:     Bhyve: no
configure:      Test: yes
configure:    Remote: yes
configure:   Network: yes
configure:  Libvirtd: yes
configure: Interface: yes
configure:   macvtap: yes
configure:  virtport: yes
configure:
configure: Storage Drivers
configure:
configure:      Dir: yes
configure:       FS: yes
configure:    NetFS: yes
configure:      LVM: yes
configure:    iSCSI: no
configure:     SCSI: yes
configure:    mpath: yes
configure:     Disk: no
configure:      RBD: no
configure: Sheepdog: no
configure:  Gluster: no
configure:
configure: Security Drivers
configure:
configure:  SELinux: yes (/selinux)
configure: AppArmor: no (install profiles: no)
configure:
configure: Driver Loadable Modules
configure:
configure:   dlopen:  -ldl
configure:
configure: Libraries
configure:
configure:   apparmor: no
configure:       attr: no
configure:      audit: no
configure:      avahi: no
configure:      blkid: no
configure:      capng: yes (CFLAGS='' LIBS='-lcap-ng')
configure:       curl: no
configure:       dbus: no
configure:       fuse: yes (CFLAGS='-D_FILE_OFFSET_BITS=64
-I/usr/include/fuse  ' LIBS='-pthread -lfuse  ')
configure:  glusterfs: no
configure:        hal: no
configure:      netcf: no
configure:    numactl: no
configure:  openwsman: no
configure:  pciaccess: yes (CFLAGS=' ' LIBS='-lpciaccess  ')
configure:   readline: no
configure:    sanlock: no
configure:       sasl: no
configure:    selinux: yes (CFLAGS='' LIBS='-lselinux')
configure:       ssh2: no
configure: systemd_daemon: yes (CFLAGS=' ' LIBS='-lsystemd-daemon 
')
configure:       udev: yes (CFLAGS=' ' LIBS='-ludev  ')
configure:       yajl: no
configure:   libxml: -I/usr/include/libxml2   -lxml2
configure:   dlopen: -ldl
configure: openwsman: no
configure:   gnutls: no
configure: firewalld: no
configure:   polkit: /usr/bin/pkcheck (version 1)
configure:      xen: no
configure:   xenapi: no
configure: xenlight: no
configure:     pcap: no
configure:       nl:   -lnl
configure:    mscom: no
configure:      xdr:
configure:      rbd: no
configure: pm-utils: yes
configure:
configure: Test suite
configure:
configure:    Coverage: no
configure:   Alloc OOM: no
configure:
configure: Miscellaneous
configure:
configure:             Debug: yes
configure:       Use -Werror: no
configure:     Warning Flags:  -W -Waddress
-Waggressive-loop-optimizations -Wall -Warray-bounds -Wattributes
-Wbad-function-cast -Wbuiltin-macro-redefined -Wcast-align
-Wchar-subscripts -Wclobbered -Wcomment -Wcomments -Wcoverage-mismatch
-Wcpp -Wdeprecated-declarations -Wdisabled-optimization -Wdiv-by-zero
-Wdouble-promotion -Wempty-body -Wendif-labels -Wextra
-Wformat-contains-nul -Wformat-extra-args -Wformat-security
-Wformat-y2k -Wformat-zero-length -Wfree-nonheap-object
-Wignored-qualifiers -Wimplicit -Wimplicit-function-declaration
-Wimplicit-int -Winit-self -Winline -Wint-to-pointer-cast
-Winvalid-memory-model -Winvalid-pch -Wjump-misses-init -Wlogical-op
-Wmain -Wmaybe-uninitialized -Wmissing-braces -Wmissing-declarations
-Wmissing-field-initializers -Wmissing-include-dirs
-Wmissing-parameter-type -Wmissing-prototypes -Wmultichar -Wnarrowing
-Wnested-externs -Wnonnull -Wnormalized=nfc -Wold-style-declaration
-Wold-style-definition -Woverflow -Woverride-init
-Wpacked-bitfield-compat -Wparentheses -Wpointer-arith -Wpointer-sign
-Wpointer-to-int-cast -Wpragmas -Wreturn-local-addr -Wreturn-type
-Wsequence-point -Wshadow -Wsizeof-pointer-memaccess -Wstrict-aliasing
-Wstrict-prototypes -Wsuggest-attribute=const
-Wsuggest-attribute=format -Wsuggest-attribute=noreturn
-Wsuggest-attribute=pure -Wswitch -Wsync-nand -Wtrampolines
-Wtrigraphs -Wtype-limits -Wuninitialized -Wunknown-pragmas -Wunused
-Wunused-but-set-parameter -Wunused-but-set-variable -Wunused-function
-Wunused-label -Wunused-local-typedefs -Wunused-parameter
-Wunused-result -Wunused-value -Wunused-variable -Wvarargs
-Wvariadic-macros -Wvector-operation-performance
-Wvolatile-register-var -Wwrite-strings -fdiagnostics-show-option
-funit-at-a-time -Wno-sign-compare -Wjump-misses-init
-Wno-format-nonliteral -Wframe-larger-than=4096
-fstack-protector-strong -fexceptions -fasynchronous-unwind-tables
-fipa-pure-const -Wno-suggest-attribute=pure
-Wno-suggest-attribute=const
configure:            DTrace: no
configure:             numad: no
configure:       XML Catalog: /etc/xml/catalog
configure:       Init script: redhat
configure: Char device locks: /var/lock
configure:
configure: Developer Tools
configure:
configure: Wireshark dissector: no
configure:
configure: Privileges
configure:
configure:       QEMU: root:root
configure:

#make
...
make[3]: Entering directory `/usr/local/src/libvirt-1.2.7/daemon'
  CC       libvirtd_conf_la-libvirtd-config.lo
  CCLD     libvirtd_conf.la
  CC       libvirtd-libvirtd.o
  CC       libvirtd-remote.o
  CC       libvirtd-stream.o
  CCLD     libvirtd
libvirtd-remote.o: In function `remoteRelayDomainEventCheckACL':
/usr/local/src/libvirt-1.2.7/daemon/remote.c:157: undefined reference
to `virConnectDomainEventRegisterAnyCheckACL'
libvirtd-remote.o: In function `remoteRelayNetworkEventCheckACL':
/usr/local/src/libvirt-1.2.7/daemon/remote.c:184: undefined reference
to `virConnectNetworkEventRegisterAnyCheckACL'
collect2: error: ld returned 1 exit status
make[3]: *** [libvirtd] Error 1
make[3]: Leaving directory `/usr/local/src/libvirt-1.2.7/daemon'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/usr/local/src/libvirt-1.2.7/daemon'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/local/src/libvirt-1.2.7'
make: *** [all] Error 2

p.s.
I have no error when compiling libvirt-1.2.7 on second  CE-7 host.
But on second host I installed previously libvirt from  rpm, then
remove rpm and after this successfully compile libvirt 1.2.7 with same
options.
Both hosts has small difference in rpm sets,  equal kernel and gcc version.

b.r.
 Maxim Kozin

On 08/26/2014 05:37 AM, mxs kolo wrote:
>> Thanks for the report.  That is disabling quite a lot of drivers (what
>> is still left, lxc?), so it's a combination that has not gotten a
lot of
>> testing.  I'll definitely look at fixing it before 1.2.8 is
released,
>> although it may miss release candidate 0.
> It's no problem of configure options. Simple ./configure result:
I'm confused.  Earlier, you said:
> ./configure  --prefix=/usr --with-xen=no --with-qemu=no
> --with-openvz=no --with-vmware=no --with-esx=no --with-parallels=no
> --with-bhyve=no  --with-uml=no --with-vbox=no --with-selinux=no
> 
> configure:
> configure: Configuration summary
> configure: ====================> configure:
> configure: Drivers
> configure:
> configure:       Xen: no
> configure:      QEMU: yes
but here, qemu shows as yes.  Are you sure you are reporting from the
same build tree?
> 
> p.s.
> I have no error when compiling libvirt-1.2.7 on second  CE-7 host.
> But on second host I installed previously libvirt from  rpm, then
> remove rpm and after this successfully compile libvirt 1.2.7 with same
> options.
So maybe we have a bug where the build depends on pre-installed files,
rather than building properly from the tarball.  Good thing it's easy to
make a virgin VM to test this theory.  Like I said, I'll try and
reproduce and fix this, but it may be a couple days.

-- 
Eric Blake   eblake redhat com    +1-919-301-3266
Libvirt virtualization library http://libvirt.org

>> It's no problem of configure options. Simple ./configure result:
>
> I'm confused.  Earlier, you said:
>
>> ./configure  --prefix=/usr --with-xen=no --with-qemu=no
>> --with-openvz=no --with-vmware=no --with-esx=no --with-parallels=no
>> --with-bhyve=no  --with-uml=no --with-vbox=no --with-selinux=no
I try build libvirt 2 times:
  first with   ./configure  with options above   (lxc only)
  second, after  Your replay,  with pure ./configure.
And it's output from pure configure:
>> configure:
>> configure: Configuration summary
>> configure: ====================>> configure:
>> configure: Drivers
>> configure:
>> configure:       Xen: no
>> configure:      QEMU: yes
In both case make phase failed with same error about
 undefined reference to `virConnectDomainEventRegisterAnyCheckACL'

And it's not depended from configure options in my case.
> So maybe we have a bug where the build depends on pre-installed files,
> rather than building properly from the tarball.  Good thing it's easy
to
> make a virgin VM to test this theory.  Like I said, I'll try and
> reproduce and fix this, but it may be a couple days.
By the way - 1.2.6 builded successfully from source on both hosts.

b.r.
 Maxim Kozin

> So maybe we have a bug where the build depends on pre-installed files,
> rather than building properly from the tarball.  Good thing it's easy
to
> make a virgin VM to test this theory.  Like I said, I'll try and
> reproduce and fix this, but it may be a couple days.
Some news. I get  libvirt-1.2.8-rc1.tar.gz  and  successfully build it
on my "problem" node, without any make errors.
I nothing change on node, libvirt-1.2.7 still broken on make phase with error
"undefined reference to
`virConnectNetworkEventRegisterAnyCheckACL'"


b.r.
 Maxim Kozin