Richard W.M. Jones
2018-Nov-21 19:00 UTC
[Libguestfs] [PATCH nbdkit v2 0/3] Rewrite xz plugin as a filter.
v2: - Fixes a number of bugs in corner cases. - Uses a 1M block size to fetch from the underlying plugin. This improves performance considerably. I also tested this much more thoroughly and can't find any more bugs. Rich.
Richard W.M. Jones
2018-Nov-21 19:00 UTC
[Libguestfs] [PATCH nbdkit v2 1/3] Rewrite xz plugin as a filter.
The xz plugin should really be a filter so that it can be applied on
top of other sources, especially curl:
nbdkit --filter=xz curl
url=https://download.fedoraproject.org/pub/fedora/linux/releases/29/Cloud/x86_64/images/Fedora-Cloud-Base-29-1.2.x86_64.raw.xz
This repurposes the xz test to test only the filter. The plugin is no
longer tested as it will be deprecated in the next commit.
---
TODO | 2 -
configure.ac | 8 +-
filters/xz/Makefile.am | 71 +++++
filters/xz/blkcache.c | 146 ++++++++++
filters/xz/blkcache.h | 50 ++++
filters/xz/nbdkit-xz-filter.pod | 91 ++++++
filters/xz/xz.c | 230 +++++++++++++++
filters/xz/xzfile.c | 502 ++++++++++++++++++++++++++++++++
filters/xz/xzfile.h | 71 +++++
tests/Makefile.am | 38 +--
tests/test-xz.c | 4 +-
11 files changed, 1187 insertions(+), 26 deletions(-)
diff --git a/TODO b/TODO
index f732780..d37f594 100644
--- a/TODO
+++ b/TODO
@@ -90,8 +90,6 @@ Suggestions for filters
* tar plugin should really be a filter
-* xz plugin should really be a filter
-
* gzip plugin should really be a filter
* masking plugin features for testing clients (see 'nozero' and
'fua'
diff --git a/configure.ac b/configure.ac
index b355915..1325767 100644
--- a/configure.ac
+++ b/configure.ac
@@ -599,10 +599,10 @@ AS_IF([test "$with_zlib" != "no"],[
])
AM_CONDITIONAL([HAVE_ZLIB],[test "x$ZLIB_LIBS" != "x"])
-dnl Check for liblzma (only if you want to compile the xz plugin).
+dnl Check for liblzma (only if you want to compile the xz filter).
AC_ARG_WITH([liblzma],
[AS_HELP_STRING([--without-liblzma],
- [disable xz plugin @<:@default=check@:>@])],
+ [disable xz filter @<:@default=check@:>@])],
[],
[with_liblzma=check])
AS_IF([test "$with_liblzma" != "no"],[
@@ -611,7 +611,7 @@ AS_IF([test "$with_liblzma" != "no"],[
AC_SUBST([LIBLZMA_LIBS])
AC_DEFINE([HAVE_LIBLZMA],[1],[liblzma found at compile time.])
],
- [AC_MSG_WARN([liblzma not found, xz plugin will be disabled])])
+ [AC_MSG_WARN([liblzma not found, xz filter will be disabled])])
])
AM_CONDITIONAL([HAVE_LIBLZMA],[test "x$LIBLZMA_LIBS" !=
"x"])
@@ -728,6 +728,7 @@ filters="\
offset \
partition \
truncate \
+ xz \
"
AC_SUBST([plugins])
AC_SUBST([lang_plugins])
@@ -790,6 +791,7 @@ AC_CONFIG_FILES([Makefile
filters/offset/Makefile
filters/partition/Makefile
filters/truncate/Makefile
+ filters/xz/Makefile
src/Makefile
src/nbdkit.pc
tests/functions.sh
diff --git a/filters/xz/Makefile.am b/filters/xz/Makefile.am
new file mode 100644
index 0000000..4b4edc7
--- /dev/null
+++ b/filters/xz/Makefile.am
@@ -0,0 +1,71 @@
+# nbdkit
+# Copyright (C) 2013-2018 Red Hat Inc.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+#
+# * Neither the name of Red Hat nor the names of its contributors may be
+# used to endorse or promote products derived from this software without
+# specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS
IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+# PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+
+include $(top_srcdir)/common-rules.mk
+
+EXTRA_DIST = nbdkit-xz-filter.pod
+
+if HAVE_LIBLZMA
+
+filter_LTLIBRARIES = nbdkit-xz-filter.la
+
+nbdkit_xz_filter_la_SOURCES = \
+ blkcache.c \
+ blkcache.h \
+ xz.c \
+ xzfile.c \
+ xzfile.h \
+ $(top_srcdir)/include/nbdkit-filter.h
+
+nbdkit_xz_filter_la_CPPFLAGS = \
+ -I$(top_srcdir)/include
+nbdkit_xz_filter_la_CFLAGS = \
+ $(WARNINGS_CFLAGS) \
+ $(LIBLZMA_CFLAGS)
+nbdkit_xz_filter_la_LIBADD = \
+ $(LIBLZMA_LIBS)
+nbdkit_xz_filter_la_LDFLAGS = \
+ -module -avoid-version -shared
+
+if HAVE_POD
+
+man_MANS = nbdkit-xz-filter.1
+CLEANFILES += $(man_MANS)
+
+nbdkit-xz-filter.1: nbdkit-xz-filter.pod
+ $(PODWRAPPER) --section=1 --man $@ \
+ --html $(top_builddir)/html/$@.html \
+ $<
+
+endif HAVE_POD
+
+endif
diff --git a/filters/xz/blkcache.c b/filters/xz/blkcache.c
new file mode 100644
index 0000000..65c8a03
--- /dev/null
+++ b/filters/xz/blkcache.c
@@ -0,0 +1,146 @@
+/* nbdkit
+ * Copyright (C) 2013 Red Hat Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Red Hat nor the names of its contributors may be
+ * used to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS
IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <config.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdint.h>
+#include <inttypes.h>
+
+#include <nbdkit-plugin.h>
+
+#include "blkcache.h"
+
+/* Implemented as a very simple LRU list with a fixed depth. */
+struct blkcache {
+ size_t maxdepth;
+ struct block *blocks;
+ blkcache_stats stats;
+};
+
+struct block {
+ uint64_t start;
+ uint64_t size;
+ char *data;
+};
+
+blkcache *
+new_blkcache (size_t maxdepth)
+{
+ blkcache *c;
+
+ c = malloc (sizeof *c);
+ if (!c) {
+ nbdkit_error ("malloc: %m");
+ return NULL;
+ }
+
+ c->blocks = calloc (maxdepth, sizeof (struct block));
+ if (!c->blocks) {
+ nbdkit_error ("calloc: %m");
+ free (c);
+ return NULL;
+ }
+ c->maxdepth = maxdepth;
+ c->stats.hits = c->stats.misses = 0;
+
+ return c;
+}
+
+void
+free_blkcache (blkcache *c)
+{
+ size_t i;
+
+ for (i = 0; i < c->maxdepth; ++i)
+ free (c->blocks[i].data);
+ free (c->blocks);
+ free (c);
+}
+
+char *
+get_block (blkcache *c, uint64_t offset, uint64_t *start, uint64_t *size)
+{
+ size_t i;
+ struct block tmp;
+
+ for (i = 0; i < c->maxdepth; ++i) {
+ if (c->blocks[i].data != NULL &&
+ c->blocks[i].start <= offset &&
+ offset < c->blocks[i].start + c->blocks[i].size) {
+ /* This block is now most recently used, so put it at the start. */
+ if (i > 0) {
+ tmp = c->blocks[0];
+ c->blocks[0] = c->blocks[i];
+ c->blocks[i] = tmp;
+ }
+
+ c->stats.hits++;
+ *start = c->blocks[0].start;
+ *size = c->blocks[0].size;
+ return c->blocks[0].data;
+ }
+ }
+
+ c->stats.misses++;
+ return NULL;
+}
+
+int
+put_block (blkcache *c, uint64_t start, uint64_t size, char *data)
+{
+ size_t i;
+
+ /* Eject the least recently used block. */
+ i = c->maxdepth-1;
+ if (c->blocks[i].data != NULL)
+ free (c->blocks[i].data);
+
+ for (; i >= 1; --i)
+ c->blocks[i] = c->blocks[i-1];
+
+ /* The new block is most recently used, so it goes at the start. */
+ c->blocks[0].start = start;
+ c->blocks[0].size = size;
+ c->blocks[0].data = data;
+
+ return 0;
+}
+
+void
+blkcache_get_stats (blkcache *c, blkcache_stats *ret)
+{
+ memcpy (ret, &c->stats, sizeof (c->stats));
+}
diff --git a/filters/xz/blkcache.h b/filters/xz/blkcache.h
new file mode 100644
index 0000000..e68f5d1
--- /dev/null
+++ b/filters/xz/blkcache.h
@@ -0,0 +1,50 @@
+/* nbdkit
+ * Copyright (C) 2013 Red Hat Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Red Hat nor the names of its contributors may be
+ * used to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS
IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef NBDKIT_BLKCACHE_H
+#define NBDKIT_BLKCACHE_H
+
+typedef struct blkcache blkcache;
+
+typedef struct blkcache_stats {
+ size_t hits;
+ size_t misses;
+} blkcache_stats;
+
+extern blkcache *new_blkcache (size_t maxdepth);
+extern void free_blkcache (blkcache *);
+extern char *get_block (blkcache *, uint64_t offset, uint64_t *start, uint64_t
*size);
+extern int put_block (blkcache *, uint64_t start, uint64_t size, char *data);
+extern void blkcache_get_stats (blkcache *, blkcache_stats *ret);
+
+#endif /* NBDKIT_XZFILE_H */
diff --git a/filters/xz/nbdkit-xz-filter.pod b/filters/xz/nbdkit-xz-filter.pod
new file mode 100644
index 0000000..e595388
--- /dev/null
+++ b/filters/xz/nbdkit-xz-filter.pod
@@ -0,0 +1,91 @@
+=head1 NAME
+
+nbdkit-xz-filter - nbdkit xz filter
+
+=head1 SYNOPSIS
+
+ nbdkit --filter=xz file FILENAME.xz
+
+ nbdkit --filter=xz curl url=https://example.com/FILENAME.xz
+
+=head1 DESCRIPTION
+
+C<nbdkit-xz-filter> is a filter for L<nbdkit(1)> which uncompresses
+the underlying plugin on the fly. The filter only supports read-only
+connections.
+
+=head2 Getting best random access performance from xz
+
+L<xz(1)> files are split into streams and blocks. Most xz files
+contain only one stream which contains one or more blocks. You can
+find out how many streams and blocks are in an xz file by doing:
+
+ $ xz --list winxp.img.xz
+ Strms Blocks Compressed Uncompressed Ratio Check Filename
+ 1 1 2,100.0 MiB 6,144.0 MiB 0.342 CRC64 winxp.img.xz
+ ↑↑↑ ↑↑↑
+ streams blocks
+
+xz files are seekable on block boundaries only. Seeking is done by
+seeking directly to the lower block boundary, then uncompressing data
+until the precise byte is reached. As uncompressing xz data is slow,
+B<to get best random access performance, you must prepare your xz
+files with many small blocks.>
+
+Use the I<--block-size> option with a small-ish block size. For
+example this is the same image compressed with a 16 MB block size:
+
+ $ xz --best --block-size=16777216 winxp.img
+ ─────────────────────
+ $ xz --list winxp.img.xz
+ Strms Blocks Compressed Uncompressed Ratio Check Filename
+ 1 384 2,120.1 MiB 6,144.0 MiB 0.345 CRC64 winxp.img.xz
+ ↑↑↑
+ blocks
+
+This file can be accessed randomly. At most 16 MB will have to be
+uncompressed to seek to any byte.
+
+As you would expect, xz cannot compress as efficiently when using a
+smaller block size. The space penalty in the above example is
+S<E<lt> 1%> of the compressed file size.
+
+=head1 PARAMETERS
+
+=over 4
+
+=item B<xz-max-block=>SIZE
+
+The maximum block size that the filter will read. The filter will
+refuse to read xz files that contain any block larger than this size.
+
+See the discussion above about creating xz files with small block
+sizes in order to reduce memory usage and increase performance.
+
+This parameter is optional. If not specified it defaults to 512M.
+
+=item B<xz-max-depth=>N
+
+Maximum number of blocks stored in the LRU block cache.
+
+This parameter is optional. If not specified it defaults to 8.
+
+The filter may allocate up to
+S<maximum block size in file * maxdepth>
+bytes of memory I<per connection>.
+
+=back
+
+=head1 SEE ALSO
+
+L<nbdkit(1)>,
+L<nbdkit-filter(3)>,
+L<xz(1)>.
+
+=head1 AUTHORS
+
+Richard W.M. Jones
+
+=head1 COPYRIGHT
+
+Copyright (C) 2013-2018 Red Hat Inc.
diff --git a/filters/xz/xz.c b/filters/xz/xz.c
new file mode 100644
index 0000000..5610187
--- /dev/null
+++ b/filters/xz/xz.c
@@ -0,0 +1,230 @@
+/* nbdkit
+ * Copyright (C) 2013-2018 Red Hat Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Red Hat nor the names of its contributors may be
+ * used to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS
IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <config.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <string.h>
+#include <unistd.h>
+#include <errno.h>
+
+#include <lzma.h>
+
+#include <nbdkit-filter.h>
+
+#include "xzfile.h"
+#include "blkcache.h"
+
+static uint64_t maxblock = 512 * 1024 * 1024;
+static size_t maxdepth = 8;
+
+static int
+xz_config (nbdkit_next_config *next, void *nxdata,
+ const char *key, const char *value)
+{
+ if (strcmp (key, "xz-max-block") == 0) {
+ int64_t r = nbdkit_parse_size (value);
+ if (r == -1)
+ return -1;
+ maxblock = (uint64_t) r;
+ return 0;
+ }
+ else if (strcmp (key, "xz-max-depth") == 0) {
+ size_t r;
+
+ if (sscanf (value, "%zu", &r) != 1) {
+ nbdkit_error ("could not parse 'xz-max-depth'
parameter");
+ return -1;
+ }
+ if (r == 0) {
+ nbdkit_error ("'xz-max-depth' parameter must be >=
1");
+ return -1;
+ }
+
+ maxdepth = r;
+ return 0;
+ }
+ else
+ return next (nxdata, key, value);
+}
+
+#define xz_config_help \
+ "xz-max-block=<SIZE> (optional) Maximum block size allowed
(default: 512M)\n"\
+ "xz-max-depth=<N> (optional) Maximum blocks in cache (default:
4)\n"
+
+/* The per-connection handle. */
+struct xz_handle {
+ xzfile *xz;
+
+ /* Block cache. */
+ blkcache *c;
+};
+
+/* Create the per-connection handle. */
+static void *
+xz_open (nbdkit_next_open *next, void *nxdata, int readonly)
+{
+ struct xz_handle *h;
+
+ /* Always pass readonly=1 to the underlying plugin. */
+ if (next (nxdata, 1) == -1)
+ return NULL;
+
+ h = malloc (sizeof *h);
+ if (h == NULL) {
+ nbdkit_error ("malloc: %m");
+ return NULL;
+ }
+
+ h->c = new_blkcache (maxdepth);
+ if (!h->c) {
+ free (h);
+ return NULL;
+ }
+
+ /* Initialized in xz_prepare. */
+ h->xz = NULL;
+
+ return h;
+}
+
+/* Free up the per-connection handle. */
+static void
+xz_close (void *handle)
+{
+ struct xz_handle *h = handle;
+ blkcache_stats stats;
+
+ if (h->c) {
+ blkcache_get_stats (h->c, &stats);
+
+ nbdkit_debug ("cache: hits = %zu, misses = %zu", stats.hits,
stats.misses);
+ }
+
+ xzfile_close (h->xz);
+ free_blkcache (h->c);
+ free (h);
+}
+
+static int
+xz_prepare (struct nbdkit_next_ops *next_ops, void *nxdata, void *handle)
+{
+ struct xz_handle *h = handle;
+
+ h->xz = xzfile_open (next_ops, nxdata);
+ if (!h->xz)
+ return -1;
+
+ if (maxblock < xzfile_max_uncompressed_block_size (h->xz)) {
+ nbdkit_error ("xz file largest block is bigger than maxblock\n"
+ "Either recompress the xz file with smaller blocks (see
nbdkit-xz-plugin(1))\n"
+ "or make maxblock parameter bigger.\n"
+ "maxblock = %" PRIu64 " (bytes)\n"
+ "largest block in xz file = %" PRIu64 "
(bytes)",
+ maxblock,
+ xzfile_max_uncompressed_block_size (h->xz));
+ return -1;
+ }
+
+ return 0;
+}
+
+/* Get the file size. */
+static int64_t
+xz_get_size (struct nbdkit_next_ops *next_ops, void *nxdata, void *handle)
+{
+ struct xz_handle *h = handle;
+
+ return xzfile_get_size (h->xz);
+}
+
+/* Read data from the file. */
+static int
+xz_pread (struct nbdkit_next_ops *next_ops, void *nxdata,
+ void *handle, void *buf, uint32_t count, uint64_t offset,
+ uint32_t flags, int *err)
+{
+ struct xz_handle *h = handle;
+ char *data;
+ uint64_t start, size;
+ uint32_t n;
+
+ /* Find the block in the cache. */
+ data = get_block (h->c, offset, &start, &size);
+ if (!data) {
+ /* Not in the cache. We need to read the block from the xz file. */
+ data = xzfile_read_block (h->xz, next_ops, nxdata, flags, err,
+ offset, &start, &size);
+ if (data == NULL)
+ return -1;
+ put_block (h->c, start, size, data);
+ }
+
+ /* It's possible if the blocks are really small or oddly aligned or
+ * if the requests are large that we need to read the following
+ * block to satisfy the request.
+ */
+ n = count;
+ if (start + size - offset < n)
+ n = start + size - offset;
+
+ memcpy (buf, &data[offset-start], n);
+ buf += n;
+ count -= n;
+ offset += n;
+ if (count > 0)
+ return xz_pread (next_ops, nxdata, h, buf, count, offset, flags, err);
+
+ return 0;
+}
+
+#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_REQUESTS
+
+static struct nbdkit_filter filter = {
+ .name = "xz",
+ .longname = "nbdkit XZ filter",
+ .version = PACKAGE_VERSION,
+ .config = xz_config,
+ .config_help = xz_config_help,
+ .open = xz_open,
+ .close = xz_close,
+ .prepare = xz_prepare,
+ .get_size = xz_get_size,
+ .pread = xz_pread,
+};
+
+NBDKIT_REGISTER_FILTER(filter)
diff --git a/filters/xz/xzfile.c b/filters/xz/xzfile.c
new file mode 100644
index 0000000..c5e1da1
--- /dev/null
+++ b/filters/xz/xzfile.c
@@ -0,0 +1,502 @@
+/* nbdkit
+ * Copyright (C) 2013 Red Hat Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Red Hat nor the names of its contributors may be
+ * used to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS
IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/* liblzma is a complex interface, so abstract it here. */
+
+#include <config.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <string.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/types.h>
+
+#include <nbdkit-filter.h>
+
+#include <lzma.h>
+
+#include "xzfile.h"
+
+#ifndef O_CLOEXEC
+#define O_CLOEXEC 0
+#endif
+
+#define XZ_HEADER_MAGIC "\xfd" "7zXZ\0"
+#define XZ_HEADER_MAGIC_LEN 6
+#define XZ_FOOTER_MAGIC "YZ"
+#define XZ_FOOTER_MAGIC_LEN 2
+
+struct xzfile {
+ lzma_index *idx;
+ size_t nr_streams;
+ size_t nr_blocks;
+ uint64_t max_uncompressed_block_size;
+};
+
+static bool check_header_magic (struct nbdkit_next_ops *next_ops, void
*nxdata);
+static lzma_index *parse_indexes (struct nbdkit_next_ops *next_ops, void
*nxdata, size_t *);
+static int iter_indexes (lzma_index *idx, size_t *, uint64_t *);
+
+xzfile *
+xzfile_open (struct nbdkit_next_ops *next_ops, void *nxdata)
+{
+ xzfile *xz;
+ uint64_t size;
+
+ xz = malloc (sizeof *xz);
+ if (xz == NULL) {
+ nbdkit_error ("malloc: %m");
+ return NULL;
+ }
+
+ /* Check file magic. */
+ if (!check_header_magic (next_ops, nxdata)) {
+ nbdkit_error ("xz: not an xz file");
+ goto err1;
+ }
+
+ /* Read and parse the indexes. */
+ xz->idx = parse_indexes (next_ops, nxdata, &xz->nr_streams);
+ if (xz->idx == NULL)
+ goto err1;
+
+ /* Iterate over indexes to find the number of and largest block. */
+ if (iter_indexes (xz->idx,
+ &xz->nr_blocks,
&xz->max_uncompressed_block_size) == -1)
+ goto err1;
+
+ size = lzma_index_uncompressed_size (xz->idx);
+ nbdkit_debug ("xz: size %" PRIu64 " bytes (%.1fM)",
+ size, size / 1024.0 / 1024.0);
+ nbdkit_debug ("xz: %zu streams, %zu blocks", xz->nr_streams,
xz->nr_blocks);
+ nbdkit_debug ("xz: maximum uncompressed block size %" PRIu64 "
bytes (%.1fM)",
+ xz->max_uncompressed_block_size,
+ xz->max_uncompressed_block_size / 1024.0 / 1024.0);
+
+ return xz;
+
+ err1:
+ free (xz);
+ return NULL;
+}
+
+static bool
+check_header_magic (struct nbdkit_next_ops *next_ops, void *nxdata)
+{
+ char buf[XZ_HEADER_MAGIC_LEN];
+ int err;
+
+ if (next_ops->pread (nxdata, buf, XZ_HEADER_MAGIC_LEN, 0, 0, &err) ==
-1) {
+ nbdkit_error ("xz: could not read header magic: error %d", err);
+ return false;
+ }
+ if (memcmp (buf, XZ_HEADER_MAGIC, XZ_HEADER_MAGIC_LEN) != 0)
+ return false;
+ return true;
+}
+
+/* For explanation of this function, see src/xz/list.c:parse_indexes
+ * in the xz sources.
+ */
+static lzma_index *
+parse_indexes (struct nbdkit_next_ops *next_ops, void *nxdata,
+ size_t *nr_streams)
+{
+ lzma_ret r;
+ int64_t size, pos, index_size, offs;
+ int err;
+ uint8_t footer[LZMA_STREAM_HEADER_SIZE];
+ uint8_t header[LZMA_STREAM_HEADER_SIZE];
+ lzma_stream_flags footer_flags;
+ lzma_stream_flags header_flags;
+ lzma_stream strm = LZMA_STREAM_INIT;
+ lzma_index *combined_index = NULL;
+ lzma_index *this_index = NULL;
+ lzma_vli stream_padding = 0;
+
+ *nr_streams = 0;
+
+ /* Check file size is a multiple of 4 bytes. */
+ pos = size = next_ops->get_size (nxdata);
+ if (pos == -1) {
+ nbdkit_error ("xz: get_size: %m");
+ goto err;
+ }
+ if ((pos & 3) != 0) {
+ nbdkit_error ("xz: not an xz file: size is not a multiple of 4
bytes");
+ goto err;
+ }
+
+ /* Jump backwards through the file identifying each stream. */
+ while (pos > 0) {
+ nbdkit_debug ("looping through streams: pos = %" PRIi64, pos);
+
+ if (pos < LZMA_STREAM_HEADER_SIZE) {
+ nbdkit_error ("xz: corrupted file at %" PRIi64, pos);
+ goto err;
+ }
+
+ if (next_ops->pread (nxdata, footer, LZMA_STREAM_HEADER_SIZE,
+ pos - LZMA_STREAM_HEADER_SIZE,
+ 0, &err) == -1) {
+ nbdkit_error ("xz: read stream footer: error %d", err);
+ goto err;
+ }
+ /* Skip stream padding. */
+ if (footer[8] == 0 && footer[9] == 0 &&
+ footer[10] == 0 && footer[11] == 0) {
+ stream_padding += 4;
+ pos -= 4;
+ continue;
+ }
+
+ pos -= LZMA_STREAM_HEADER_SIZE;
+ (*nr_streams)++;
+
+ nbdkit_debug ("decode stream footer at pos = %" PRIi64, pos);
+
+ /* Does the stream footer look reasonable? */
+ r = lzma_stream_footer_decode (&footer_flags, footer);
+ if (r != LZMA_OK) {
+ nbdkit_error ("xz: invalid stream footer (error %d)", r);
+ goto err;
+ }
+ nbdkit_debug ("backward_size = %" PRIu64,
+ (uint64_t) footer_flags.backward_size);
+ index_size = footer_flags.backward_size;
+ if (pos < index_size + LZMA_STREAM_HEADER_SIZE) {
+ nbdkit_error ("xz: invalid stream footer");
+ goto err;
+ }
+
+ pos -= index_size;
+ nbdkit_debug ("decode index at pos = %" PRIi64, pos);
+
+ /* Decode the index. */
+ r = lzma_index_decoder (&strm, &this_index, UINT64_MAX);
+ if (r != LZMA_OK) {
+ nbdkit_error ("xz: invalid stream index (error %d)", r);
+ goto err;
+ }
+
+ offs = pos;
+ do {
+ uint8_t buf[BUFSIZ];
+
+ strm.avail_in = index_size;
+ if (strm.avail_in > BUFSIZ)
+ strm.avail_in = BUFSIZ;
+ if (pos + strm.avail_in > size)
+ strm.avail_in = size - pos;
+
+ if (next_ops->pread (nxdata, buf, strm.avail_in, offs, 0, &err) ==
-1) {
+ nbdkit_error ("xz: read index: error %d", err);
+ goto err;
+ }
+ offs += strm.avail_in;
+ index_size -= strm.avail_in;
+
+ strm.next_in = buf;
+ r = lzma_code (&strm, LZMA_RUN);
+ } while (r == LZMA_OK);
+
+ if (r != LZMA_STREAM_END) {
+ nbdkit_error ("xz: could not parse index (error %d)", r);
+ goto err;
+ }
+
+ pos -= lzma_index_total_size (this_index) + LZMA_STREAM_HEADER_SIZE;
+
+ nbdkit_debug ("decode stream header at pos = %" PRIi64, pos);
+
+ /* Read and decode the stream header. */
+ if (next_ops->pread (nxdata, header, LZMA_STREAM_HEADER_SIZE, pos, 0,
+ &err) == -1) {
+ nbdkit_error ("xz: read stream header: error %d", err);
+ goto err;
+ }
+
+ r = lzma_stream_header_decode (&header_flags, header);
+ if (r != LZMA_OK) {
+ nbdkit_error ("xz: invalid stream header (error %d)", r);
+ goto err;
+ }
+
+ /* Header and footer of the stream should be equal. */
+ r = lzma_stream_flags_compare (&header_flags, &footer_flags);
+ if (r != LZMA_OK) {
+ nbdkit_error ("xz: header and footer of stream are not equal (error
%d)",
+ r);
+ goto err;
+ }
+
+ /* Store the decoded stream flags in this_index. */
+ r = lzma_index_stream_flags (this_index, &footer_flags);
+ if (r != LZMA_OK) {
+ nbdkit_error ("xz: cannot read stream_flags from index (error
%d)", r);
+ goto err;
+ }
+
+ /* Store the amount of stream padding so far. Needed to calculate
+ * compressed offsets correctly in multi-stream files.
+ */
+ r = lzma_index_stream_padding (this_index, stream_padding);
+ if (r != LZMA_OK) {
+ nbdkit_error ("xz: cannot set stream_padding in index (error
%d)", r);
+ goto err;
+ }
+
+ if (combined_index != NULL) {
+ r = lzma_index_cat (this_index, combined_index, NULL);
+ if (r != LZMA_OK) {
+ nbdkit_error ("xz: cannot combine indexes");
+ goto err;
+ }
+ }
+
+ combined_index = this_index;
+ this_index = NULL;
+ }
+
+ lzma_end (&strm);
+
+ return combined_index;
+
+ err:
+ lzma_end (&strm);
+ lzma_index_end (this_index, NULL);
+ lzma_index_end (combined_index, NULL);
+ return NULL;
+}
+
+/* Iterate over the indexes to find the number of blocks and
+ * the largest block.
+ */
+static int
+iter_indexes (lzma_index *idx,
+ size_t *nr_blocks, uint64_t *max_uncompressed_block_size)
+{
+ lzma_index_iter iter;
+
+ *nr_blocks = 0;
+ *max_uncompressed_block_size = 0;
+
+ lzma_index_iter_init (&iter, idx);
+ while (!lzma_index_iter_next (&iter, LZMA_INDEX_ITER_NONEMPTY_BLOCK)) {
+ if (iter.block.uncompressed_size > *max_uncompressed_block_size)
+ *max_uncompressed_block_size = iter.block.uncompressed_size;
+ (*nr_blocks)++;
+ }
+
+ return 0;
+}
+
+void
+xzfile_close (xzfile *xz)
+{
+ if (xz) {
+ lzma_index_end (xz->idx, NULL);
+ free (xz);
+ }
+}
+
+uint64_t
+xzfile_max_uncompressed_block_size (xzfile *xz)
+{
+ return xz->max_uncompressed_block_size;
+}
+
+uint64_t
+xzfile_get_size (xzfile *xz)
+{
+ return lzma_index_uncompressed_size (xz->idx);
+}
+
+char *
+xzfile_read_block (xzfile *xz,
+ struct nbdkit_next_ops *next_ops,
+ void *nxdata, uint32_t flags, int *err,
+ uint64_t offset,
+ uint64_t *start_rtn, uint64_t *size_rtn)
+{
+ int64_t offs, size;
+ lzma_index_iter iter;
+ uint8_t header[LZMA_BLOCK_HEADER_SIZE_MAX];
+ lzma_block block;
+ lzma_filter filters[LZMA_FILTERS_MAX + 1];
+ lzma_ret r;
+ lzma_stream strm = LZMA_STREAM_INIT;
+ const size_t bufsize = 1024 * 1024;
+ unsigned char *buf = NULL;
+ char *data = NULL;
+ size_t i;
+
+ /* Read the total size of the underlying disk, so we don't
+ * read over the end.
+ */
+ size = next_ops->get_size (nxdata);
+ if (size == -1) {
+ nbdkit_error ("xz: get_size: %m");
+ return NULL;
+ }
+
+ /* Locate the block containing the uncompressed offset. */
+ lzma_index_iter_init (&iter, xz->idx);
+ if (lzma_index_iter_locate (&iter, offset)) {
+ nbdkit_error ("cannot find offset %" PRIu64 " in the xz
file", offset);
+ return NULL;
+ }
+
+ *start_rtn = iter.block.uncompressed_file_offset;
+ *size_rtn = iter.block.uncompressed_size;
+
+ nbdkit_debug ("seek: block number %d at file offset %" PRIu64,
+ (int) iter.block.number_in_file,
+ (uint64_t) iter.block.compressed_file_offset);
+
+ /* Read the block header. Start by reading a single byte which
+ * tell us how big the block header is.
+ */
+ offs = iter.block.compressed_file_offset;
+ if (next_ops->pread (nxdata, header, 1, offs, 0, err) == -1) {
+ nbdkit_error ("xz: read: could not read block header byte: error
%d", *err);
+ return NULL;
+ }
+ offs++;
+
+ if (header[0] == '\0') {
+ nbdkit_error ("xz: read: unexpected invalid block in file, header[0] =
0");
+ return NULL;
+ }
+
+ block.version = 0;
+ block.check = iter.stream.flags->check;
+ block.filters = filters;
+ block.header_size = lzma_block_header_size_decode (header[0]);
+
+ /* Now read and decode the block header. */
+ if (next_ops->pread (nxdata, &header[1], block.header_size-1, offs,
+ 0, err) == -1) {
+ nbdkit_error ("xz: read: could not read block of compressed data:
"
+ "error %d", *err);
+ return NULL;
+ }
+ offs += block.header_size - 1;
+
+ r = lzma_block_header_decode (&block, NULL, header);
+ if (r != LZMA_OK) {
+ nbdkit_error ("invalid block header (error %d)", r);
+ return NULL;
+ }
+
+ /* What this actually does is it checks that the block header
+ * matches the index.
+ */
+ r = lzma_block_compressed_size (&block, iter.block.unpadded_size);
+ if (r != LZMA_OK) {
+ nbdkit_error ("cannot calculate compressed size (error %d)", r);
+ goto err1;
+ }
+
+ /* Read the block data. */
+ r = lzma_block_decoder (&strm, &block);
+ if (r != LZMA_OK) {
+ nbdkit_error ("invalid block (error %d)", r);
+ goto err1;
+ }
+
+ data = malloc (*size_rtn);
+ if (data == NULL) {
+ nbdkit_error ("malloc (%" PRIu64 " bytes): %m\n"
+ "NOTE: If this error occurs, you need to recompress your
xz files with a smaller block size. Use: 'xz --block-size=16777216
...'.",
+ *size_rtn);
+ goto err2;
+ }
+
+ buf = malloc (bufsize);
+ if (buf == NULL) {
+ nbdkit_error ("malloc: %m");
+ goto err2;
+ }
+
+ strm.next_in = NULL;
+ strm.avail_in = 0;
+ strm.next_out = (uint8_t *) data;
+ strm.avail_out = block.uncompressed_size;
+ do {
+ if (strm.avail_in == 0) {
+ strm.avail_in = bufsize;
+ if (offs + strm.avail_in > size)
+ strm.avail_in = size - offs;
+ if (strm.avail_in > 0) {
+ strm.next_in = buf;
+ if (next_ops->pread (nxdata, buf, strm.avail_in, offs, 0, err) ==
-1) {
+ nbdkit_error ("xz: read: error %d", *err);
+ goto err2;
+ }
+ offs += strm.avail_in;
+ }
+ }
+
+ r = lzma_code (&strm, LZMA_RUN);
+ } while (r == LZMA_OK);
+
+ if (r != LZMA_OK && r != LZMA_STREAM_END) {
+ nbdkit_error ("could not parse block data (error %d)", r);
+ goto err2;
+ }
+
+ lzma_end (&strm);
+
+ for (i = 0; filters[i].id != LZMA_VLI_UNKNOWN; ++i)
+ free (filters[i].options);
+
+ free (buf);
+
+ return data;
+
+ err2:
+ lzma_end (&strm);
+ err1:
+ for (i = 0; filters[i].id != LZMA_VLI_UNKNOWN; ++i)
+ free (filters[i].options);
+
+ free (data);
+ free (buf);
+
+ return NULL;
+}
diff --git a/filters/xz/xzfile.h b/filters/xz/xzfile.h
new file mode 100644
index 0000000..9c9ddbc
--- /dev/null
+++ b/filters/xz/xzfile.h
@@ -0,0 +1,71 @@
+/* nbdkit
+ * Copyright (C) 2013-2018 Red Hat Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Red Hat nor the names of its contributors may be
+ * used to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS
IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/* liblzma is a complex interface, so abstract it here. */
+
+#ifndef NBDKIT_XZFILE_H
+#define NBDKIT_XZFILE_H
+
+#include <nbdkit-filter.h>
+
+typedef struct xzfile xzfile;
+
+/* Open (and verify) the named xz file. */
+extern xzfile *xzfile_open (struct nbdkit_next_ops *next_ops, void *nxdata);
+
+/* Close the file and free up all resources. */
+extern void xzfile_close (xzfile *);
+
+/* Get (uncompressed) size of the largest block in the file. */
+extern uint64_t xzfile_max_uncompressed_block_size (xzfile *);
+
+/* Get the total uncompressed size of the file. */
+extern uint64_t xzfile_get_size (xzfile *);
+
+/* Read the xz file block that contains the byte at 'offset' in the
+ * uncompressed file.
+ *
+ * The uncompressed block of data, which probably begins before the
+ * requested byte and ends after it, is returned. The caller must
+ * free it. NULL is returned if there was an error.
+ *
+ * The start offset & size of the block relative to the uncompressed
+ * file are returned in *start and *size.
+ */
+extern char *xzfile_read_block (xzfile *xz,
+ struct nbdkit_next_ops *next_ops,
+ void *nxdata, uint32_t flags, int *err,
+ uint64_t offset,
+ uint64_t *start, uint64_t *size);
+
+#endif /* NBDKIT_XZFILE_H */
diff --git a/tests/Makefile.am b/tests/Makefile.am
index 959d6e6..0cd2366 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -472,25 +472,6 @@ libvixDiskLib_la_CXXFLAGS = \
libvixDiskLib_la_LDFLAGS = \
-shared -version-number 6:0:0 -rpath /nowhere
-# xz plugin test.
-if HAVE_LIBLZMA
-if HAVE_GUESTFISH
-
-LIBGUESTFS_TESTS += test-xz
-check_DATA += disk.xz
-MAINTAINERCLEANFILES += disk.xz
-
-test_xz_SOURCES = test-xz.c test.h
-test_xz_CFLAGS = $(WARNINGS_CFLAGS) $(LIBGUESTFS_CFLAGS)
-test_xz_LDADD = libtest.la $(LIBGUESTFS_LIBS)
-
-disk.xz: disk
- rm -f $@
- xz --best --block-size=16777216 -c disk > $@
-
-endif HAVE_GUESTFISH
-endif HAVE_LIBLZMA
-
# zero plugin test.
TESTS += test-zero.sh
@@ -746,4 +727,23 @@ TESTS += \
test-truncate2.sh \
test-truncate3.sh
+# xz filter test.
+if HAVE_LIBLZMA
+if HAVE_GUESTFISH
+
+LIBGUESTFS_TESTS += test-xz
+check_DATA += disk.xz
+MAINTAINERCLEANFILES += disk.xz
+
+test_xz_SOURCES = test-xz.c test.h
+test_xz_CFLAGS = $(WARNINGS_CFLAGS) $(LIBGUESTFS_CFLAGS)
+test_xz_LDADD = libtest.la $(LIBGUESTFS_LIBS)
+
+disk.xz: disk
+ rm -f $@
+ xz --best --block-size=16777216 -c disk > $@
+
+endif HAVE_GUESTFISH
+endif HAVE_LIBLZMA
+
endif HAVE_PLUGINS
diff --git a/tests/test-xz.c b/tests/test-xz.c
index 46b1d04..7248a96 100644
--- a/tests/test-xz.c
+++ b/tests/test-xz.c
@@ -1,5 +1,5 @@
/* nbdkit
- * Copyright (C) 2013 Red Hat Inc.
+ * Copyright (C) 2013-2018 Red Hat Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -51,7 +51,7 @@ main (int argc, char *argv[])
int r;
char *data;
- if (test_start_nbdkit ("xz", "-r", "disk.xz",
NULL) == -1)
+ if (test_start_nbdkit ("--filter=xz", "file",
"disk.xz", NULL) == -1)
exit (EXIT_FAILURE);
g = guestfs_create ();
--
2.19.0.rc0
Richard W.M. Jones
2018-Nov-21 19:00 UTC
[Libguestfs] [PATCH nbdkit v2 2/3] xz: Deprecate xz plugin.
Plan to remove it in the next-by-one stable release. --- plugins/xz/nbdkit-xz-plugin.pod | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/plugins/xz/nbdkit-xz-plugin.pod b/plugins/xz/nbdkit-xz-plugin.pod index 2bd0a1c..acd7817 100644 --- a/plugins/xz/nbdkit-xz-plugin.pod +++ b/plugins/xz/nbdkit-xz-plugin.pod @@ -6,6 +6,15 @@ nbdkit-xz-plugin - nbdkit xz plugin nbdkit xz [file=]FILENAME.xz +=head1 DEPRECATED + +B<The xz plugin is deprecated in S<nbdkit E<ge> 1.9.2> and will be +removed in S<nbdkit 1.12>>. It has been replaced with a filter with +the same functionality, see L<nbdkit-xz-filter(1)>. You can use the +filter like this: + + nbdkit --filter=xz file file.xz + =head1 DESCRIPTION C<nbdkit-xz-plugin> is a file serving plugin for L<nbdkit(1)>. -- 2.19.0.rc0
Richard W.M. Jones
2018-Nov-21 19:00 UTC
[Libguestfs] [PATCH nbdkit v2 3/3] xz: tests: Use a very small block size in test disk.
A better test of edge cases which occur between blocks. In fact this change found two bugs while developing the xz filter (not present in the plugin). --- tests/Makefile.am | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tests/Makefile.am b/tests/Makefile.am index 0cd2366..e9b01f2 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -741,7 +741,9 @@ test_xz_LDADD = libtest.la $(LIBGUESTFS_LIBS) disk.xz: disk rm -f $@ - xz --best --block-size=16777216 -c disk > $@ +# We choose a very small block size here only for testing. Normally +# you should choose a 16M block size. + xz --best --block-size=32768 -c disk > $@ endif HAVE_GUESTFISH endif HAVE_LIBLZMA -- 2.19.0.rc0
Seemingly Similar Threads
- [PATCH nbdkit 0/2] Rewrite xz plugin as a filter.
- [PATCH supermin 0/2] Allow an alternate libc to be used for init.
- [PATCH v2 0/3 supermin] URPMI & xz support.
- [PATCH supermin 0/2] Allow an alternate libc to be used for init.
- [nbdkit PATCH 0/2] ext2 export list tweaks