thr3ads.net - Libguestfs - [Libguestfs] [PATCH 4/4] p2v: add -x option to nm-online [Jun 2016]

If this information is useful, please help other people find it:
Share via:

Cédric Bosdonnat

2016-Jun-22 09:45 UTC

[Libguestfs] [PATCH 0/4] virt-p2v support for openSUSE / SLES

Hi there,

Here are a few patches to get virt-p2v working on openSUSE and SLES. Note
that I intentionnaly use icewm and yast2 lan for SLES and openSUSE since SLES
doesn't ship metacity and all of NetworkManager pieces.

Cédric Bosdonnat (4):
  p2v: use yast2 lan on SUSE distros rather than NM
  p2v: fix dependencies for SLES / openSUSE
  p2v: add virt-p2v-make-kiwi to generate kiwi config
  p2v: add -x option to nm-online

 .gitignore                 |   3 +
 configure.ac               |   2 +
 p2v/Makefile.am            |  31 +++++-
 p2v/dependencies.m4        |  19 ++--
 p2v/gui.c                  |   7 +-
 p2v/kiwi-config.sh         |  73 +++++++++++++++
 p2v/kiwi-config.xml.in     |  92 ++++++++++++++++++
 p2v/launch-virt-p2v.in     |  17 +++-
 p2v/utils.c                |   2 +-
 p2v/virt-p2v-make-disk.pod |   1 +
 p2v/virt-p2v-make-kiwi.in  | 228 +++++++++++++++++++++++++++++++++++++++++++++
 p2v/virt-p2v-make-kiwi.pod | 184 ++++++++++++++++++++++++++++++++++++
 p2v/virt-p2v.pod           |   1 +
 13 files changed, 642 insertions(+), 18 deletions(-)
 create mode 100755 p2v/kiwi-config.sh
 create mode 100644 p2v/kiwi-config.xml.in
 create mode 100644 p2v/virt-p2v-make-kiwi.in
 create mode 100644 p2v/virt-p2v-make-kiwi.pod

-- 
2.6.6

Cédric Bosdonnat

2016-Jun-22 09:45 UTC

head link

[Libguestfs] [PATCH 1/4] p2v: use yast2 lan on SUSE distros rather than NM

NetworkManager isn't provided on SLES. As yast2 lan is available on all
openSUSE / SLE distro, use it instead.
---
 p2v/gui.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/p2v/gui.c b/p2v/gui.c
index e720002..b50cadf 100644
--- a/p2v/gui.c
+++ b/p2v/gui.c
@@ -51,6 +51,7 @@
 
 #include <config.h>
 
+#include <sys/stat.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <stdarg.h>
@@ -654,7 +655,11 @@ test_connection_ok (gpointer user_data)
 static void
 configure_network_button_clicked (GtkWidget *w, gpointer data)
 {
-  ignore_value (system ("nm-connection-editor &"));
+  struct stat statbuf;
+  if (stat ("/sbin/yast2", &statbuf) >= 0)
+    ignore_value (system ("yast2 lan &"));
+  else
+    ignore_value (system ("nm-connection-editor &"));
 }
 
 /**
-- 
2.6.6

Cédric Bosdonnat

2016-Jun-22 09:45 UTC

head link

[Libguestfs] [PATCH 2/4] p2v: fix dependencies for SLES / openSUSE

Use the common denominator for SLES and openSUSE in the dependencies.
For example most of NetworkManager pieces and metacity aren't provided
on SLES.

ifconfig is in the net-tools-deprecated package in openSUSE Factory,
which means after openSUSE Leap 42.2. Older versions have it in the
net-tools package. Adding this complexity only to add ifconfig because
sysadmins prefer it isn't too good:  iproute2 is doing the job.
---
 p2v/dependencies.m4 | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/p2v/dependencies.m4 b/p2v/dependencies.m4
index 635e253..fd20ddd 100644
--- a/p2v/dependencies.m4
+++ b/p2v/dependencies.m4
@@ -119,8 +119,8 @@ ifelse(SUSE,1,
   pcre
   libxml2
   gtk`'GTK_VERSION
-  /usr/bin/ssh
-  /usr/bin/qemu-nbd
+  qemu-tools
+  openssh
   curl
   ethtool
   hwdata
@@ -129,14 +129,15 @@ ifelse(SUSE,1,
   smartmontools
   util-linux
   xterm
-  /usr/bin/xinit
-  /usr/bin/Xorg
+  xinit
+  xorg-x11-server
   xf86-video-*
   dejavu-fonts
-  metacity
   NetworkManager
-  nm-connection-editor
-  network-manager-applet
-  dbus-x11
-  net-tools-deprecated
+  xf86-input-*
+  icewm-lite
+  dbus-1-x11
+  yast2-network
+  libyui-qt
+  SuSEfirewall2
 )
-- 
2.6.6

Cédric Bosdonnat

2016-Jun-22 09:45 UTC

head link

[Libguestfs] [PATCH 3/4] p2v: add virt-p2v-make-kiwi to generate kiwi config

Kiwi is the tool used by openSUSE / SLES to generate many sort of
disk images. Add a virt-p2v-make-kiwi tool and his documentation to
geneate the p2v appliance kiwi configuration.
---
 .gitignore                 |   3 +
 configure.ac               |   2 +
 p2v/Makefile.am            |  31 +++++-
 p2v/kiwi-config.sh         |  73 +++++++++++++++
 p2v/kiwi-config.xml.in     |  92 ++++++++++++++++++
 p2v/launch-virt-p2v.in     |  17 +++-
 p2v/virt-p2v-make-disk.pod |   1 +
 p2v/virt-p2v-make-kiwi.in  | 228 +++++++++++++++++++++++++++++++++++++++++++++
 p2v/virt-p2v-make-kiwi.pod | 184 ++++++++++++++++++++++++++++++++++++
 p2v/virt-p2v.pod           |   1 +
 10 files changed, 625 insertions(+), 7 deletions(-)
 create mode 100755 p2v/kiwi-config.sh
 create mode 100644 p2v/kiwi-config.xml.in
 create mode 100644 p2v/virt-p2v-make-kiwi.in
 create mode 100644 p2v/virt-p2v-make-kiwi.pod

diff --git a/.gitignore b/.gitignore
index d48dee3..c249cb0 100644
--- a/.gitignore
+++ b/.gitignore
@@ -329,6 +329,7 @@ Makefile.in
 /p2v/stamp-virt-p2v.pod
 /p2v/stamp-virt-p2v-make-disk.pod
 /p2v/stamp-virt-p2v-make-kickstart.pod
+/p2v/stamp-virt-p2v-make-kiwi.pod
 /p2v/test-virt-p2v-pxe.authorized_keys
 /p2v/test-virt-p2v-pxe.id_rsa
 /p2v/test-virt-p2v-pxe.id_rsa.pub
@@ -346,6 +347,8 @@ Makefile.in
 /p2v/virt-p2v-make-disk.1
 /p2v/virt-p2v-make-kickstart
 /p2v/virt-p2v-make-kickstart.1
+/p2v/virt-p2v-make-kiwi
+/p2v/virt-p2v-make-kiwi.1
 /perl/_build
 /perl/bindtests.pl
 /perl/blib
diff --git a/configure.ac b/configure.ac
index 9ec8ac4..00941e0 100644
--- a/configure.ac
+++ b/configure.ac
@@ -157,6 +157,8 @@ AC_CONFIG_FILES([p2v/virt-p2v-make-disk],
                 [chmod +x,-w p2v/virt-p2v-make-disk])
 AC_CONFIG_FILES([p2v/virt-p2v-make-kickstart],
                 [chmod +x,-w p2v/virt-p2v-make-kickstart])
+AC_CONFIG_FILES([p2v/virt-p2v-make-kiwi],
+                [chmod +x,-w p2v/virt-p2v-make-kiwi])
 AC_CONFIG_FILES([php/extension/php-for-tests.sh],
                 [chmod +x,-w php/extension/php-for-tests.sh])
 AC_CONFIG_FILES([pick-guests.pl],
diff --git a/p2v/Makefile.am b/p2v/Makefile.am
index 4c4994b..525b80c 100644
--- a/p2v/Makefile.am
+++ b/p2v/Makefile.am
@@ -21,6 +21,8 @@ EXTRA_DIST = \
 	$(TESTS) $(SLOW_TESTS) \
 	dependencies.m4 \
 	issue \
+	kiwi-config.sh \
+	kiwi-config.xml.in \
 	launch-virt-p2v.in \
 	p2v.ks.in \
 	p2v.service \
@@ -30,7 +32,9 @@ EXTRA_DIST = \
 	virt-p2v-make-disk.in \
 	virt-p2v-make-disk.pod \
 	virt-p2v-make-kickstart.in \
-	virt-p2v-make-kickstart.pod
+	virt-p2v-make-kickstart.pod \
+	virt-p2v-make-kiwi.in \
+	virt-p2v-make-kiwi.pod
 
 # Don't clean ssh_host_rsa_key{,.pub} or id_rsa{,.pub} since those
 # consume system entropy to regenerate.
@@ -41,6 +45,7 @@ CLEANFILES = \
 	stamp-virt-p2v.pod \
 	stamp-virt-p2v-make-disk.pod \
 	stamp-virt-p2v-make-kickstart.pod \
+	stamp-virt-p2v-make-kiwi.pod \
 	test-virt-p2v-pxe.authorized_keys \
 	test-virt-p2v-pxe.img \
 	test-virt-p2v-pxe.vmlinuz \
@@ -49,7 +54,8 @@ CLEANFILES = \
 	virt-p2v.1 \
 	virt-p2v.img \
 	virt-p2v-make-disk.1 \
-	virt-p2v-make-kickstart.1
+	virt-p2v-make-kickstart.1 \
+	virt-p2v-make-kiwi.1
 
 # Although virt-p2v is a regular binary, it is not usually installed
 # in /usr/bin since it only functions when contained in an ISO or PXE
@@ -96,7 +102,7 @@ virt_p2v_LDADD = \
 	../gnulib/lib/libgnu.la
 
 # Scripts to build the disk image, USB key, or kickstart.
-bin_SCRIPTS = virt-p2v-make-disk virt-p2v-make-kickstart
+bin_SCRIPTS = virt-p2v-make-disk virt-p2v-make-kickstart virt-p2v-make-kiwi
 
 dependencies_files = \
 	dependencies.archlinux \
@@ -115,6 +121,8 @@ virtp2vdatadir = $(datadir)/virt-p2v
 virtp2vdata_DATA = \
 	$(dependencies_files) \
 	issue \
+	kiwi-config.sh \
+	kiwi-config.xml.in \
 	launch-virt-p2v \
 	p2v.ks.in \
 	p2v.service
@@ -130,12 +138,14 @@ launch-virt-p2v: launch-virt-p2v.in
 man_MANS = \
 	virt-p2v.1 \
 	virt-p2v-make-disk.1 \
-	virt-p2v-make-kickstart.1
+	virt-p2v-make-kickstart.1 \
+	virt-p2v-make-kiwi.1
 
 noinst_DATA = \
 	$(top_builddir)/website/virt-p2v.1.html \
 	$(top_builddir)/website/virt-p2v-make-disk.1.html \
-	$(top_builddir)/website/virt-p2v-make-kickstart.1.html
+	$(top_builddir)/website/virt-p2v-make-kickstart.1.html \
+	$(top_builddir)/website/virt-p2v-make-kiwi.1.html
 
 virt-p2v.1 $(top_builddir)/website/virt-p2v.1.html: stamp-virt-p2v.pod
 
@@ -170,6 +180,17 @@ stamp-virt-p2v-make-kickstart.pod:
virt-p2v-make-kickstart.pod
 	  $<
 	touch $@
 
+virt-p2v-make-kiwi.1 $(top_builddir)/website/virt-p2v-make-kiwi.1.html:
stamp-virt-p2v-make-kiwi.pod
+
+stamp-virt-p2v-make-kiwi.pod: virt-p2v-make-kiwi.pod
+	$(PODWRAPPER) \
+	  --man virt-p2v-make-kiwi.1 \
+	  --html $(top_builddir)/website/virt-p2v-make-kiwi.1.html \
+	  --license GPLv2+ \
+	  --warning safe \
+	  $<
+	touch $@
+
 # Run virt-p2v locally either directly or in a VM.
 # See guestfs-hacking(1) section "Running virt-p2v"
 
diff --git a/p2v/kiwi-config.sh b/p2v/kiwi-config.sh
new file mode 100755
index 0000000..b24fd3b
--- /dev/null
+++ b/p2v/kiwi-config.sh
@@ -0,0 +1,73 @@
+#!/bin/bash
+#===============+# FILE          : config.sh
+#----------------
+# PROJECT       : OpenSuSE KIWI Image System
+# COPYRIGHT     : (c) 2006 SUSE LINUX Products GmbH. All rights reserved
+#               :
+# AUTHOR        : Marcus Schaefer <ms@suse.de>
+#=====================================+# Functions...
+#--------------------------------------
+test -f /.kconfig && . /.kconfig
+test -f /.profile && . /.profile
+
+#=====================================+# Greeting...
+#--------------------------------------
+echo "Configure image: [$kiwi_iname]..."
+
+#=====================================+# Mount system filesystems
+#--------------------------------------
+baseMount
+
+#=====================================+# Setup baseproduct link
+#--------------------------------------
+suseSetupProduct
+
+#=====================================+# Add missing gpg keys to rpm
+#--------------------------------------
+suseImportBuildKey
+
+#=====================================+# Activate services
+#--------------------------------------
+suseInsertService p2v
+
+#=====================================+# Setup default target, multi-user
+#--------------------------------------
+baseSetRunlevel 3
+
+#=========================================+# remove package docs
+#------------------------------------------
+rm -rf /usr/share/doc/packages/*
+rm -rf /usr/share/doc/manual/*
+rm -rf /opt/kde*
+
+# Update the default getty target to login automatically as root without
+# prompting for a password
+sed -i 's/^ExecStart=\(.*\)/ExecStart=\1 -a root/' \
+    /usr/lib/systemd/system/getty@.service
+
+# Reserve tty1 as a getty so we can document it clearly
+echo ReserveVT=1 >> /etc/systemd/logind.conf
+
+sed -i 's/^ROOT_USES_LANG=.*$/ROOT_USES_LANG="yes"/' \
+    /etc/sysconfig/language
+
+#=====================================+# SuSEconfig
+#--------------------------------------
+suseConfig
+
+#=====================================+# Umount kernel filesystems
+#--------------------------------------
+baseCleanMount
+
+exit 0
diff --git a/p2v/kiwi-config.xml.in b/p2v/kiwi-config.xml.in
new file mode 100644
index 0000000..680076b
--- /dev/null
+++ b/p2v/kiwi-config.xml.in
@@ -0,0 +1,92 @@
+<?xml version="1.0" encoding="utf-8"?>
+<image schemaversion="6.2" name="p2v-__KIWI_BOOT__"
displayname="p2v___PACKAGE_VERSION_____KIWI_BOOT__">
+  <description type="system">
+    <author>Marcus Schäfer</author>
+    <contact>ms@suse.com</contact>
+    <specification>P2V __PACKAGE_VERSION__</specification>
+  </description>
+  <profiles>
+    <profile name="vmxFlavour" description="VMX with default
kernel" import="true"/>
+    <profile name="netboot" description="compressed rootfs
image for pxe"/>
+  </profiles>
+  <preferences>
+      <type image="iso" primary="true"
boot="isoboot/suse-__KIWI_BOOT__" flags="overlay"
hybrid="true" firmware="uefi"
kernelcmdline="splash"/>
+    <version>__PACKAGE_VERSION__</version>
+    <packagemanager>zypper</packagemanager>
+    <locale>en_US</locale>
+    <keytable>us.map.gz</keytable>
+    <hwclock>utc</hwclock>
+    <bootloader-theme>__BRANDING__</bootloader-theme>
+    <bootsplash-theme>__BRANDING__</bootsplash-theme>
+    <rpm-excludedocs>true</rpm-excludedocs>
+    <rpm-check-signatures>false</rpm-check-signatures>
+  </preferences>
+  <preferences profiles="netboot">
+    <type image="pxe" filesystem="overlayfs"
boot="netboot/suse-__KIWI_BOOT__">
+      <pxedeploy server="192.168.100.2"
blocksize="4096">
+        <partitions device="/dev/sda">
+          <partition type="swap" number="1"
size="5"/>
+          <partition type="L" number="2"
size="image" mountpoint="/" target="true"/>
+          <partition type="L" number="3"
target="false"/>
+        </partitions>
+        <union ro="/dev/sda2" rw="/dev/sda3"
type="overlayfs"/>
+      </pxedeploy>
+    </type>
+  </preferences>
+  <preferences profiles="vmxFlavour">
+      <type image="vmx" filesystem="ext3"
boot="vmxboot/suse-__KIWI_BOOT__" format="vmdk"
bootloader="grub2" firmware="uefi"
kernelcmdline="splash" bootpartition="false">
+      <systemdisk name="systemVG"/>
+      <machine memory="512" guestOS="suse"
HWversion="4">
+        <vmdisk id="0" controller="ide"/>
+        <vmnic driver="e1000" interface="0"
mode="bridged"/>
+      </machine>
+    </type>
+  </preferences>
+  <users group="root">
+    <user password="p2v" pwdformat="plain"
home="/root" name="root"/>
+  </users>
+  <!--__REPOS__-->
+  <packages type="image" patternType="onlyRequired">
+    <package name="__BASE_PATTERN__"/>
+    <package name="plymouth-branding-__BRANDING__"
bootinclude="true"/>
+    <package name="grub2-branding-__BRANDING__"
bootinclude="true"/>
+    <package name="iputils"/>
+    <package name="grub2"/>
+    <package name="grub2-x86_64-efi"/>
+    <package name="syslinux"/>
+    <package name="lvm2"/>
+    <package name="plymouth"/>
+    <package name="fontconfig"/>
+    <package name="fonts-config"/>
+    <package name="tar"/>
+    <package name="systemd"/>
+    <package name="systemd-sysvinit"/>
+    <package name="dracut"/>
+    <package name="wicked"/>
+    <package name="iproute2"/>
+    <package name="sudo"/>
+    <package name="dhcp-client"/>
+    <package name="which"/>
+    <!-- virt-p2v dependencies from dependencies.suse -->
+<!--__DEPENDENCIES__-->
+  </packages>
+  <packages type="iso">
+      <package name="gfxboot-branding-__BRANDING__"
bootinclude="true" bootdelete="true"/>
+  </packages>
+  <packages type="image" profiles="vmxFlavour">
+    <package name="kernel-default"
replaces="kernel-xen"/>
+    <package name="kernel-default"
replaces="xen-kmp-default"/>
+    <package name="kernel-default"
replaces="xen-libs"/>
+    <package name="kernel-default"
replaces="xen-tools"/>
+    <package name="kernel-default" replaces="xen"/>
+    <package name="gfxboot-branding-__BRANDING__"
bootinclude="true" bootdelete="true"/>
+  </packages>
+  <packages type="bootstrap">
+    <package name="udev"/>
+    <package name="filesystem"/>
+    <package name="glibc-locale"/>
+    <package name="cracklib-dict-full"/>
+    <package name="ca-certificates"/>
+    <package name="__RELEASE_PKG__"/>
+  </packages>
+</image>
diff --git a/p2v/launch-virt-p2v.in b/p2v/launch-virt-p2v.in
index 3e4f1f9..65481e4 100755
--- a/p2v/launch-virt-p2v.in
+++ b/p2v/launch-virt-p2v.in
@@ -30,8 +30,21 @@ else
     # self again to run the window manager and virt-p2v.
     if [ "$1" = "run" ]; then
         cd /
-        metacity &
-        nm-applet &
+
+        ID+        if test -f /etc/os-release; then
+            . /etc/os-release
+        fi
+
+        case "$ID" in
+            sles|opensuse)
+                # not all versions of SLE / openSUSE ship metacity and
nm-applet
+                icewm &
+                ;;
+            *)
+                metacity &
+                nm-applet &
+        esac
         exec @libexecdir@/virt-p2v --iso
     else
         xinit "$0" run
diff --git a/p2v/virt-p2v-make-disk.pod b/p2v/virt-p2v-make-disk.pod
index 58e845c..0765dd8 100644
--- a/p2v/virt-p2v-make-disk.pod
+++ b/p2v/virt-p2v-make-disk.pod
@@ -184,6 +184,7 @@ L</FILES> above).  If not set, a compiled-in location
is used.
 
 L<virt-p2v(1)>,
 L<virt-p2v-make-kickstart(1)>,
+L<virt-p2v-make-kiwi(1)>,
 L<virt-v2v(1)>,
 L<http://libguestfs.org/>.
 
diff --git a/p2v/virt-p2v-make-kiwi.in b/p2v/virt-p2v-make-kiwi.in
new file mode 100644
index 0000000..e493bd4
--- /dev/null
+++ b/p2v/virt-p2v-make-kiwi.in
@@ -0,0 +1,228 @@
+#!/bin/bash -
+# @configure_input@
+# virt-p2v-make-kiwi
+# Copyright (C) 2016 SUSE.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+unset CDPATH
+
+program="virt-p2v-make-kiwi"
+version="@PACKAGE_VERSION@"
+
+TEMP=`getopt \
+        -o o:V \
+        --long help,inject-ssh-identity:,output:,version \
+        -n $program -- "$@"`
+if [ $? != 0 ]; then
+    echo "$program: problem parsing the command line arguments"
+    exit 1
+fi
+eval set -- "$TEMP"
+
+usage ()
+{
+    echo "Usage:"
+    echo "  $program [--options] [-o kiwi-folder]"
+    echo
+    echo "Read $program(1) man page for more information."
+    exit $1
+}
+
+output=p2v.kiwi
+ssh_identity+
+while true; do
+    case "$1" in
+        --inject-ssh-identity)
+            ssh_identity="$2"
+            shift 2;;
+        -o|--output)
+            output="$2"
+            shift 2;;
+        -V|--version)
+            echo "$program $version"
+            exit 0;;
+        --help)
+            usage 0;;
+        --)
+            shift
+            break;;
+        *)
+            echo "internal error ($1)"
+            exit 1;;
+    esac
+done
+
+set -e
+
+# Deal with stupid autotools libexecdir-not-expandable crap.
+prefix="@prefix@"
+exec_prefix="@exec_prefix@"
+libexecdir="@libexecdir@"
+
+if [ -n "$VIRT_P2V_DATA_DIR" ]; then
+    datadir="$VIRT_P2V_DATA_DIR"
+    host_libexecdir="$VIRT_P2V_DATA_DIR"
+else
+    datadir="@datadir@/virt-p2v"
+    host_libexecdir="@libexecdir@"
+fi
+
+# Dependencies.  Since kiwi is SUSE-specific, only include
+# dependencies.suse here.
+depsfile="$datadir/dependencies.suse"
+if [ ! -f "$depsfile" ]; then
+    echo "$0: cannot find dependencies file ($depsfile)"
+    exit 1
+fi
+dependencies+while read line; do
+    if [ -n "$line" ]; then
+        depname=$(echo $line | awk '{gsub(/ /, "", $0);
print}')
+        pkg="    <package name=\"$depname\"/>"
+        if [ -z "$dependencies" ]; then
+            dependencies="$pkg"
+        else
+            dependencies="$dependencies
+$pkg"
+        fi
+    fi
+done < $depsfile
+
+# Compute the distro-dependent pieces for kiwi
+branding+release_pkg+base_pattern+kiwi_boot+repos+. /etc/os-release
+case "$NAME" in
+    SLES)
+        branding="SLE"
+        release_pkg="sles-release"
+        base_pattern="patterns-sles-Minimal"
+        case "$VERSION_ID" in
+            12)
+                kiwi_boot="SLES12"
+               
repos="http://download.suse.de/ibs/SUSE:/SLE-12:/Update/standard
+                     
http://download.suse.de/ibs/SUSE:/SLE-12:/GA/standard"
+                ;;
+            12.1)
+                kiwi_boot="SLES12"
+               
repos="http://download.suse.de/ibs/SUSE:/SLE-12-SP1:/Update/standard
+                      http://download.suse.de/ibs/SUSE:/SLE-12-SP1:/GA/standard
+                      http://download.suse.de/ibs/SUSE:/SLE-12:/Update/standard
+                     
http://download.suse.de/ibs/SUSE:/SLE-12:/GA/standard"
+                ;;
+            *)
+                echo "Unsupported distribution $NAME $VERSION_ID"
+                exit 1;;
+        esac;;
+    openSUSE*)
+        branding="openSUSE"
+        release_pkg="openSUSE-release"
+        base_pattern="patterns-openSUSE-base"
+        case "$VERSION" in
+            13.1\ *)
+                kiwi_boot="13.1"
+                repos="obs://13.1/repo/oss"
+                ;;
+            13.2\ *)
+                kiwi_boot="13.2"
+                repos="obs://13.2/repo/oss"
+                ;;
+            42.1)
+                kiwi_boot="leap42.1"
+                repos="obs://leap/42.1/repo/oss"
+                ;;
+            *\ \(Tumbleweed\))
+                kiwi_boot="leap42.1"
+                repos="obs://openSUSE:Factory/standard"
+                ;;
+            *)
+                echo "Unsupported distribution $NAME $VERSION_ID"
+                exit 1;;
+        esac;;
+    *)
+        echo "Unsupported distribution $NAME $VERSION"
+        exit 1;;
+esac
+
+# Compute the repos
+repos_xml+for repo in $repos; do
+    repos_xml="  <repository type=\"rpm-md\">\n   
<source path=\"$repo\"/>\n 
</repository>\n$repos_xml"
+done
+
+mkdir $output
+cp $datadir/kiwi-config.sh $output/config.sh
+
+mkdir -p $output/root/etc/sysconfig/network
+cat >$output/root/etc/sysconfig/network/ifcfg-eth0 << EOF
+BOOTPROTO='dhcp'
+MTU=''
+REMOTE_IPADDR=''
+STARTMODE='onboot'
+EOF
+
+mkdir -p $output/root/etc/systemd/system
+cp $datadir/p2v.service $output/root/etc/systemd/system
+
+mkdir -p $output/root/etc/udev/rules.d
+cat >$output/root/etc/udev/rules.d/70-persistent-net.rules <<EOF
+SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="?*", ATTR{dev_id}=="0x0",
ATTR{type}=="1", KERNEL=="?*", NAME="eth0"
+EOF
+
+cp $datadir/issue $output/root/etc/issue
+
+mkdir -p $output/root/usr/bin
+cp $datadir/launch-virt-p2v $output/root/usr/bin
+
+mkdir -p $output/root/$libexecdir
+cp $host_libexecdir/virt-p2v $output/root/$libexecdir
+
+if test "z$ssh_identity" != "z"; then
+    mkdir -p $output/root/var/tmp
+    cp $ssh_identity $output/root/var/tmp/id_rsa
+    chmod 0600 $output/root/var/tmp/id_rsa
+fi
+
+# Now generate the final kiwi config, substituting as necessary.
+@AWK@ \
+  -v "dependencies=$dependencies" \
+  -v "md5sum_virt_p2v=$md5sum_virt_p2v" \
+  -v "libexecdir=$libexecdir" \
+  -v "branding=$branding" \
+  -v "release_pkg=$release_pkg" \
+  -v "base_pattern=$base_pattern" \
+  -v "kiwi_boot=$kiwi_boot" \
+  -v "repos=$repos_xml" \
+  '{
+    gsub (/__PACKAGE_NAME__/, "@PACKAGE_NAME@");
+    gsub (/__PACKAGE_VERSION__/, "@PACKAGE_VERSION@");
+    gsub (/__PACKAGE_VERSION_FULL__/, "@PACKAGE_VERSION_FULL@");
+    gsub (/<!--__DEPENDENCIES__-->/, dependencies);
+    gsub (/__LIBEXECDIR__/, libexecdir);
+    gsub (/__BRANDING__/, branding);
+    gsub (/__RELEASE_PKG__/, release_pkg);
+    gsub (/__BASE_PATTERN__/, base_pattern);
+    gsub (/__KIWI_BOOT__/, kiwi_boot);
+    gsub (/<!--__REPOS__-->/, repos);
+    print;
+  }' \
+  $datadir/kiwi-config.xml.in > $output/config.xml
+
+echo "kiwi config folder written to $output"
diff --git a/p2v/virt-p2v-make-kiwi.pod b/p2v/virt-p2v-make-kiwi.pod
new file mode 100644
index 0000000..92556d9
--- /dev/null
+++ b/p2v/virt-p2v-make-kiwi.pod
@@ -0,0 +1,184 @@
+=head1 NAME
+
+virt-p2v-make-kiwi - Build the virt-p2v kiwi configuration
+
+=head1 SYNOPSIS
+
+ virt-p2v-make-kiwi [--inject-ssh-identity path] [-o kiwi-folder]
+
+=head1 DESCRIPTION
+
+L<virt-p2v(1)> converts a physical machine to run virtualized on KVM,
+managed by libvirt, OpenStack, oVirt, Red Hat Enterprise
+Virtualisation (RHEV), or one of the other targets supported by
+L<virt-v2v(1)>.
+
+Kiwi is a tool used mainly by SUSE Linux Enterprise and openSUSE to
+build live CDs, make appliances and so on. It is driven by a few files
+including an xml description of the machine.
+
+virt-p2v-make-kiwi builds a folder containing all the pieces needed for
+kiwi to build a bootable P2V live CD ISO, USB key, or PXE image.  This tool
+only builds the kiwi configuration, but this manual page describes some of
+the ways you can use the kickstart file.
+
+=head1 BUILDING THE KIWI CONFIGURATION
+
+Using virt-p2v-make-kiwi is very simple:
+
+ virt-p2v-make-kiwi
+
+will build a kiwi configuration based on the current machine's
distribution.
+
+To control the name of the output folder, use the I<-o> parameter.
+
+=head1 BUILDING A LIVE CD / ISO
+
+Once you have the kiwi configuration folder, you can use L<kiwi(1)> to
make a
+live CD:
+
+ sudo kiwi --build p2v.kiwi -d build --type iso
+
+Before running this, you may have to tweak the C<config.xml> file
+to change the locale and keyboard mapping to the one you need.
+
+If running on a SUSE Linux Entreprise Server, add the path to your packages
repositories
+using the C<--ignore-repos> and C<--add-repo> kiwi parameters.
+
+The generated ISO image will be placed in the C<build> folder.
+
+=head1 BUILDING A BOOTABLE USB KEY
+
+Use the L<dd(1)> program to write the ISO created above to a USB key:
+
+ sudo dd if=path/to/p2v.iso of=/dev/sdX
+
+=head1 BUILDING A PXE BOOT IMAGE
+
+To create a PXE boot image, run kiwi in such a way:
+
+ sudo kiwi --build $PWD/p2v.kiwi -d build --add-profile netboot --type pxe
+
+For more details on how to use the generated image, report to the kiwi
documentation
+on PXE images: L<https://doc.opensuse.org/projects/kiwi/doc/#chap.pxe>
+
+=head1 ADDING AN SSH IDENTITY
+
+You can inject an SSH identity (private key) file to the kiwi config and
+hence into the ISO using the I<--inject-ssh-identity> option.  Note
+that you I<cannot> inject a key once the ISO has been built.
+
+First create a key pair.  It must have an empty passphrase:
+
+ ssh-keygen -t rsa -N '' -f id_rsa
+
+This creates a private key (C<id_rsa>) and a public key
+(C<id_rsa.pub>) pair.  The public key should be appended to the
+C<authorized_keys> file on the virt-v2v conversion server (usually to
+C</root/.ssh/authorized_keys>).
+
+The private key should be added to the kiwi config and then
+discarded:
+
+ virt-p2v-make-kiwi [...] --inject-ssh-identity id_rsa
+ rm id_rsa
+
+The ISO can then be built from the kickstart in the usual way (see
+above), and it will contain the embedded SSH identity
+(F</var/tmp/id_rsa>).
+
+When booting virt-p2v, specify the URL of the injected file like this:
+
+ │         User name: [root_____________________________] │
+ │                                                        │
+ │          Password: [    <leave this field blank>     ] │
+ │                                                        │
+ │  SSH Identity URL: [file:///var/tmp/id_rsa___________] │
+
+or if using the kernel command line, add:
+
+ p2v.identity=file:///var/tmp/id_rsa
+
+For more information, see L<virt-p2v(1)/SSH IDENTITIES>.
+
+=head1 OPTIONS
+
+=over 4
+
+=item B<--help>
+
+Display help.
+
+=item B<--inject-ssh-identity> id_rsa
+
+Add an SSH identity (private key) file into the kickstart.
+See L</ADDING AN SSH IDENTITY> above.
+
+=item B<-o> OUTPUT
+
+=item B<--output> OUTPUT
+
+Write kiwi configuration to the C<OUTPUT> folder.  If not specified, the
default is
+F<p2v.kiwi> in the current directory.
+
+=item B<-V>
+
+=item B<--version>
+
+Display version number and exit.
+
+=back
+
+=head1 FILES
+
+=over 4
+
+=item F<$libexecdir/virt-p2v>
+
+The L<virt-p2v(1)> binary which is copied into the kiwi configuration.
+
+The location of the binary can be changed by setting the
+C<VIRT_P2V_DATA_DIR> environment variable.
+
+=item F<$datadir/virt-p2v/issue>
+
+=item F<$datadir/virt-p2v/launch-virt-p2v.in>
+
+=item F<$datadir/virt-p2v/kiwi>
+
+=item F<$datadir/virt-p2v/p2v.service>
+
+Various data files that are used to make the kiwi appliance.
+
+The location of these files can be changed by setting the
+C<VIRT_P2V_DATA_DIR> environment variable.
+
+=back
+
+=head1 ENVIRONMENT VARIABLES
+
+=over 4
+
+=item C<VIRT_P2V_DATA_DIR>
+
+The directory where virt-p2v-make-kiwi looks for data files and
+the virt-p2v binary (see L</FILES> above).  If not set, a compiled-in
+location is used.
+
+=back
+
+=head1 SEE ALSO
+
+L<virt-p2v(1)>,
+L<virt-p2v-make-disk(1)>,
+L<virt-v2v(1)>,
+L<kiwi(1)>,
+L<http://libguestfs.org/>.
+
+=head1 AUTHORS
+
+Cédric Bosdonnat
+
+=head1 COPYRIGHT
+
+Copyright (C) 2016 SUSE Ltd.
diff --git a/p2v/virt-p2v.pod b/p2v/virt-p2v.pod
index 945d8c2..d013fcf 100644
--- a/p2v/virt-p2v.pod
+++ b/p2v/virt-p2v.pod
@@ -757,6 +757,7 @@ the graphical UI.
 
 L<virt-p2v-make-disk(1)>,
 L<virt-p2v-make-kickstart(1)>,
+L<virt-p2v-make-kiwi(1)>,
 L<virt-v2v(1)>,
 L<qemu-nbd(1)>,
 L<ssh(1)>,
-- 
2.6.6

Cédric Bosdonnat

2016-Jun-22 09:45 UTC

head link

[Libguestfs] [PATCH 4/4] p2v: add -x option to nm-online

On distros not running NetworkManager, use the nm-online -x parameter
to exit quickly. The network connection will be checked just after
anyway when attempting to connect to the conversion server using ssh.
---
 p2v/utils.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/p2v/utils.c b/p2v/utils.c
index c4f82cd..746093b 100644
--- a/p2v/utils.c
+++ b/p2v/utils.c
@@ -139,7 +139,7 @@ get_if_vendor (const char *if_name, int truncate)
 }
 
 /* XXX We could make this configurable. */
-#define NETWORK_ONLINE_COMMAND "nm-online -t 30"
+#define NETWORK_ONLINE_COMMAND "nm-online -t 30 -x"
 
 /**
  * Wait for the network to come online, but don't error out if that
-- 
2.6.6

Richard W.M. Jones

2016-Jun-22 09:58 UTC

head link

Re: [Libguestfs] [PATCH 1/4] p2v: use yast2 lan on SUSE distros rather than NM

On Wed, Jun 22, 2016 at 11:45:32AM +0200, Cédric Bosdonnat
wrote:> NetworkManager isn't provided on SLES. As yast2 lan is available on all
> openSUSE / SLE distro, use it instead.
> ---
>  p2v/gui.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/p2v/gui.c b/p2v/gui.c
> index e720002..b50cadf 100644
> --- a/p2v/gui.c
> +++ b/p2v/gui.c
> @@ -51,6 +51,7 @@
>  
>  #include <config.h>
>  
> +#include <sys/stat.h>
>  #include <stdio.h>
>  #include <stdlib.h>
>  #include <stdarg.h>
There's an informal ordering for header files, and putting
<sys/stat.h> at the very top isn't in that tradition!
> @@ -654,7 +655,11 @@ test_connection_ok (gpointer user_data)
>  static void
>  configure_network_button_clicked (GtkWidget *w, gpointer data)
>  {
> -  ignore_value (system ("nm-connection-editor &"));
> +  struct stat statbuf;
> +  if (stat ("/sbin/yast2", &statbuf) >= 0)
> +    ignore_value (system ("yast2 lan &"));
> +  else
> +    ignore_value (system ("nm-connection-editor &"));
How about using access ("/sbin/yast2", X_OK)?

Rich.

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-builder quickly builds VMs from scratch
http://libguestfs.org/virt-builder.1.html

Richard W.M. Jones

2016-Jun-22 09:59 UTC

head link

Re: [Libguestfs] [PATCH 2/4] p2v: fix dependencies for SLES / openSUSE

On Wed, Jun 22, 2016 at 11:45:33AM +0200, Cédric Bosdonnat
wrote:> Use the common denominator for SLES and openSUSE in the dependencies.
> For example most of NetworkManager pieces and metacity aren't provided
> on SLES.
> 
> ifconfig is in the net-tools-deprecated package in openSUSE Factory,
> which means after openSUSE Leap 42.2. Older versions have it in the
> net-tools package. Adding this complexity only to add ifconfig because
> sysadmins prefer it isn't too good:  iproute2 is doing the job.
> ---
>  p2v/dependencies.m4 | 19 ++++++++++---------
>  1 file changed, 10 insertions(+), 9 deletions(-)
> 
> diff --git a/p2v/dependencies.m4 b/p2v/dependencies.m4
> index 635e253..fd20ddd 100644
> --- a/p2v/dependencies.m4
> +++ b/p2v/dependencies.m4
> @@ -119,8 +119,8 @@ ifelse(SUSE,1,
>    pcre
>    libxml2
>    gtk`'GTK_VERSION
> -  /usr/bin/ssh
> -  /usr/bin/qemu-nbd
> +  qemu-tools
> +  openssh
>    curl
>    ethtool
>    hwdata
> @@ -129,14 +129,15 @@ ifelse(SUSE,1,
>    smartmontools
>    util-linux
>    xterm
> -  /usr/bin/xinit
> -  /usr/bin/Xorg
> +  xinit
> +  xorg-x11-server
>    xf86-video-*
>    dejavu-fonts
> -  metacity
>    NetworkManager
> -  nm-connection-editor
> -  network-manager-applet
> -  dbus-x11
> -  net-tools-deprecated
> +  xf86-input-*
> +  icewm-lite
> +  dbus-1-x11
> +  yast2-network
> +  libyui-qt
> +  SuSEfirewall2
>  )
> -- 
ACK.

Rich.

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-df lists disk usage of guests without needing to install any
software inside the virtual machine.  Supports Linux and Windows.
http://people.redhat.com/~rjones/virt-df/

Richard W.M. Jones

2016-Jun-22 10:03 UTC

head link

Re: [Libguestfs] [PATCH 4/4] p2v: add -x option to nm-online

On Wed, Jun 22, 2016 at 11:45:35AM +0200, Cédric Bosdonnat
wrote:> On distros not running NetworkManager, use the nm-online -x parameter
> to exit quickly. The network connection will be checked just after
> anyway when attempting to connect to the conversion server using ssh.
> ---
>  p2v/utils.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/p2v/utils.c b/p2v/utils.c
> index c4f82cd..746093b 100644
> --- a/p2v/utils.c
> +++ b/p2v/utils.c
> @@ -139,7 +139,7 @@ get_if_vendor (const char *if_name, int truncate)
>  }
>  
>  /* XXX We could make this configurable. */
> -#define NETWORK_ONLINE_COMMAND "nm-online -t 30"
> +#define NETWORK_ONLINE_COMMAND "nm-online -t 30 -x"
>  
>  /**
>   * Wait for the network to come online, but don't error out if that
> -- 
> 2.6.6
ACK patches 3 & 4.

Thanks,

Rich.

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-p2v converts physical machines to virtual machines.  Boot with a
live CD or over the network (PXE) and turn machines into KVM guests.
http://libguestfs.org/virt-v2v

Richard W.M. Jones

2016-Jun-24 10:01 UTC

head link

Re: [Libguestfs] [PATCH 4/4] p2v: add -x option to nm-online

On Wed, Jun 22, 2016 at 11:45:35AM +0200, Cédric Bosdonnat
wrote:> On distros not running NetworkManager, use the nm-online -x parameter
> to exit quickly. The network connection will be checked just after
> anyway when attempting to connect to the conversion server using ssh.
> ---
>  p2v/utils.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/p2v/utils.c b/p2v/utils.c
> index c4f82cd..746093b 100644
> --- a/p2v/utils.c
> +++ b/p2v/utils.c
> @@ -139,7 +139,7 @@ get_if_vendor (const char *if_name, int truncate)
>  }
>  
>  /* XXX We could make this configurable. */
> -#define NETWORK_ONLINE_COMMAND "nm-online -t 30"
> +#define NETWORK_ONLINE_COMMAND "nm-online -t 30 -x"
>  
>  /**
>   * Wait for the network to come online, but don't error out if that
I had to revert this as it breaks p2v/test-virt-p2v-pxe.sh (only
run when you use "make check-slow" or
"make -C p2v run-virt-p2v-non-gui-conversion").

I'm not actually sure why it breaks it, since the VM in that test is
running NetworkManager.  It could be some kind of boot ordering issue.

Rich.

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-builder quickly builds VMs from scratch
http://libguestfs.org/virt-builder.1.html

Reasonably Related Threads

Search for more reasonably related threads

Libguestfs - Jun 2016 - [PATCH 4/4] p2v: add -x option to nm-online

[Libguestfs] [PATCH 0/4] virt-p2v support for openSUSE / SLES

[Libguestfs] [PATCH 1/4] p2v: use yast2 lan on SUSE distros rather than NM

[Libguestfs] [PATCH 2/4] p2v: fix dependencies for SLES / openSUSE

[Libguestfs] [PATCH 3/4] p2v: add virt-p2v-make-kiwi to generate kiwi config

[Libguestfs] [PATCH 4/4] p2v: add -x option to nm-online

Re: [Libguestfs] [PATCH 1/4] p2v: use yast2 lan on SUSE distros rather than NM

Re: [Libguestfs] [PATCH 2/4] p2v: fix dependencies for SLES / openSUSE

Re: [Libguestfs] [PATCH 4/4] p2v: add -x option to nm-online

Re: [Libguestfs] [PATCH 4/4] p2v: add -x option to nm-online

Reasonably Related Threads