Richard W.M. Jones
2015-Jun-14 13:37 UTC
[Libguestfs] [PATCH] pod: Use F<> for filenames instead of C<>.
Done using a sequence of regular expressions like this:
perl -pi.bak -e 's{C</}{F</}g' `git ls-files \*.pod`
generator/actions.ml
perl -pi.bak -e 's{C<C:\\}{F<C:\\}g' `git ls-files \*.pod`
generator/actions.ml
[etc]
and then tediously checking every change by hand.
---
align/virt-alignment-scan.pod | 8 +-
appliance/libguestfs-make-fixed-appliance.pod | 6 +-
builder/virt-builder.pod | 58 +++---
builder/virt-index-validate.pod | 2 +-
cat/virt-cat.pod | 16 +-
cat/virt-filesystems.pod | 12 +-
cat/virt-log.pod | 10 +-
cat/virt-ls.pod | 10 +-
customize/virt-customize.pod | 10 +-
daemon/guestfsd.pod | 16 +-
df/virt-df.pod | 12 +-
diff/virt-diff.pod | 8 +-
edit/virt-edit.pod | 18 +-
examples/guestfs-faq.pod | 28 +--
examples/guestfs-performance.pod | 20 +-
examples/guestfs-recipes.pod | 22 +-
examples/guestfs-testing.pod | 6 +-
fish/guestfish.pod | 60 +++---
fish/libguestfs-tools.conf.pod | 10 +-
fish/virt-copy-in.pod | 4 +-
format/virt-format.pod | 12 +-
fuse/guestmount.pod | 8 +-
generator/actions.ml | 250 +++++++++++-----------
guestfs-release-notes.pod | 38 ++--
inspector/virt-inspector.pod | 12 +-
java/examples/guestfs-java.pod | 8 +-
make-fs/virt-make-fs.pod | 2 +-
p2v/virt-p2v-make-disk.pod | 8 +-
p2v/virt-p2v-make-kickstart.pod | 20 +-
p2v/virt-p2v.pod | 26 +--
rescue/virt-rescue.pod | 20 +-
resize/virt-resize.pod | 14 +-
sparsify/virt-sparsify.pod | 6 +-
src/guestfs.pod | 288 +++++++++++++-------------
sysprep/virt-sysprep.pod | 14 +-
v2v/test-harness/virt-v2v-test-harness.pod | 8 +-
v2v/virt-v2v.pod | 46 ++--
37 files changed, 558 insertions(+), 558 deletions(-)
diff --git a/align/virt-alignment-scan.pod b/align/virt-alignment-scan.pod
index 2a740a4..54f3ffd 100644
--- a/align/virt-alignment-scan.pod
+++ b/align/virt-alignment-scan.pod
@@ -67,7 +67,7 @@ program. The columns are:
=item col 1
-The device and partition name (eg. C</dev/sda1> meaning the
+The device and partition name (eg. F</dev/sda1> meaning the
first partition on the first block device).
When listing all libvirt domains (no I<-a> or I<-d> option given)
this
@@ -151,12 +151,12 @@ For example:
virt-alignment-scan --format=raw -a disk.img
-forces raw format (no auto-detection) for C<disk.img>.
+forces raw format (no auto-detection) for F<disk.img>.
virt-alignment-scan --format=raw -a disk.img --format -a another.img
-forces raw format (no auto-detection) for C<disk.img> and reverts to
-auto-detection for C<another.img>.
+forces raw format (no auto-detection) for F<disk.img> and reverts to
+auto-detection for F<another.img>.
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
diff --git a/appliance/libguestfs-make-fixed-appliance.pod
b/appliance/libguestfs-make-fixed-appliance.pod
index 3242afc..9807f80 100644
--- a/appliance/libguestfs-make-fixed-appliance.pod
+++ b/appliance/libguestfs-make-fixed-appliance.pod
@@ -112,7 +112,7 @@ Display the version number and exit.
Instead of creating the appliance in an output directory, create a
compressed tarball of the appliance in the current directory called
-C<appliance-I<VERSION>.tar.xz> where C<VERSION> is the
version of
+F<appliance-I<VERSION>.tar.xz> where C<VERSION> is the
version of
libguestfs.
Using I<--xz> can take some time. If working normally, the tool is
@@ -132,8 +132,8 @@ into a full appliance by running C<supermin --build>.
However, a simpler "fixed appliance" can also be used. libguestfs
detects this by looking for a directory on the path containing four
-files called C<kernel>, C<initrd>, C<root> and
C<README.fixed> (note
-the C<README.fixed> file must be present as well).
+files called F<kernel>, F<initrd>, F<root> and
F<README.fixed> (note
+the F<README.fixed> file must be present as well).
If the fixed appliance is found, libguestfs skips supermin entirely
and just runs qemu with the kernel, initrd and root disk from the
diff --git a/builder/virt-builder.pod b/builder/virt-builder.pod
index aa19ea2..41cda1a 100644
--- a/builder/virt-builder.pod
+++ b/builder/virt-builder.pod
@@ -77,7 +77,7 @@ The first time this runs it has to download the template over
the
network, but this gets cached (see L</CACHING>).
The name of the output file is derived from the template name, so
-above it will be C<fedora-20.img>. You can change the output filename
+above it will be F<fedora-20.img>. You can change the output filename
using the I<-o> option:
virt-builder fedora-20 -o mydisk.img
@@ -87,7 +87,7 @@ logical volumes.
virt-builder fedora-20 --format qcow2
-As above, but write the output in qcow2 format to C<fedora-20.qcow2>.
+As above, but write the output in qcow2 format to F<fedora-20.qcow2>.
virt-builder fedora-20 --size 20G
@@ -104,7 +104,7 @@ As above, but using an i386 template, if available.
virt-builder fedora-20 --root-password file:/tmp/rootpw
Create a Fedora 20 image. The root password is taken from the file
-C</tmp/rootpw>.
+F</tmp/rootpw>.
Note if you I<don't> set I<--root-password> then the guest is
given
a I<random> root password.
@@ -168,7 +168,7 @@ Or:
--edit '/etc/yum.conf:
s/gpgcheck=1/gpgcheck=0/'
-which edits C</etc/yum.conf> inside the disk image (during disk image
+which edits F</etc/yum.conf> inside the disk image (during disk image
creation, long before boot).
You can combine these options, and have multiple options of all types.
@@ -220,7 +220,7 @@ C<FORMAT> is usually C<raw> or C<qcow2>.
Use C<raw> for ISOs.
I<--cache> DIR sets the directory to use/check for cached template
files. If not set, defaults to either
-C<$XDG_CACHE_HOME/virt-builder/> or C<$HOME/.cache/virt-builder/>.
+F<$XDG_CACHE_HOME/virt-builder/> or F<$HOME/.cache/virt-builder/>.
I<--no-cache> disables template caching.
@@ -295,7 +295,7 @@ specify it by using the I<--format> option.
In the case where the guest contains multiple kernels, the one with
the highest version number is chosen. To extract arbitrary kernels
from the disk image, see L<guestfish(1)>. To extract the entire
-C</boot> directory of a guest, see L<virt-copy-out(1)>.
+F</boot> directory of a guest, see L<virt-copy-out(1)>.
=item B<--gpg> GPG
@@ -436,7 +436,7 @@ the install).
=item B<--output> filename
-Write the output to C<filename>. If you don't specify this option,
+Write the output to F<filename>. If you don't specify this option,
then the output filename is generated by taking the C<os-version>
string and adding C<.img> (for raw format) or C<.qcow2> (for qcow2
format).
@@ -680,7 +680,7 @@ See L<localectl(1)> and
L<https://www.happyassassin.net/2013/11/23/keyboard-layouts-in-fedora-20-and-previously/>
for more details.
-=head3 Keyboard layout using C</etc/sysconfig/keyboard>
+=head3 Keyboard layout using F</etc/sysconfig/keyboard>
For RHEL E<le> 6, Fedora E<le> 18 and similar, upload or modify the
keyboard configuration file using the I<--upload>, I<--write> or
@@ -693,7 +693,7 @@ The format of this file can be found documented in many
places online.
=head3 Keyboard layout with Debian-derived distros
-For Debian-derived distros using C</etc/default/keyboard>, upload or
+For Debian-derived distros using F</etc/default/keyboard>, upload or
modify the keyboard file using the I<--upload>, I<--write> or
I<--edit> options. For example:
@@ -757,17 +757,17 @@ logged in one of the following locations:
=over 4
-=item C</tmp/builder.log>
+=item F</tmp/builder.log>
On Linux, BSD and other guests.
-=item C<C:\Temp\builder.log>
+=item F<C:\Temp\builder.log>
On Windows, DOS guests.
-=item C</builder.log>
+=item F</builder.log>
-If C</tmp> or C<C:\Temp> is missing.
+If F</tmp> or F<C:\Temp> is missing.
=back
@@ -781,7 +781,7 @@ the guest, so they can login without supplying a password.
The C<SELECTOR> part of the option value is optional; in this case,
I<--ssh-inject> C<USER> means that we look in the I<current>
-user's C<~/.ssh> directory to find the default public ID file. That
+user's F<~/.ssh> directory to find the default public ID file. That
key is uploaded. "default public ID" is the I<default_ID_file>
file
described in L<ssh-copy-id(1)>.
@@ -791,7 +791,7 @@ If specified, the C<SELECTOR> can be in one of the
following formats:
=item B<--ssh-inject> USER:file:FILENAME
-Read the ssh key from C<FILENAME>. C<FILENAME> is usually a
I<.pub>
+Read the ssh key from F<FILENAME>. F<FILENAME> is usually a
I<.pub>
file.
=item B<--ssh-inject> USER:string:KEY_STRING
@@ -801,8 +801,8 @@ string like I<ssh-rsa AAAA.... user@localhost>.
=back
-In any case, the C<~USER/.ssh> directory and the
-C<~USER/.ssh/authorized_keys> file will be created if not existing
+In any case, the F<~USER/.ssh> directory and the
+F<~USER/.ssh/authorized_keys> file will be created if not existing
already.
=head2 FIRST BOOT SCRIPTS
@@ -1013,7 +1013,7 @@ Run L<virt-rescue(1)> on the disk image:
virt-rescue -a disk.img
This gives you a rescue shell. You can mount the filesystems from the
-disk image on C</sysroot> and examine them using ordinary Linux
+disk image on F</sysroot> and examine them using ordinary Linux
commands. You can also chroot into the guest to reinstall the
bootloader. The virt-rescue man page has a lot more information and
examples.
@@ -1061,12 +1061,12 @@ with the I<.conf> extension and located in the
following paths:
=item *
$XDG_CONFIG_HOME/virt-builder/repos.d/ (C<$XDG_CONFIG_HOME> is
-C<$HOME/.config> if not set).
+F<$HOME/.config> if not set).
=item *
$XDG_CONFIG_DIRS/virt-builder/repos.d/ (where C<$XDG_CONFIG_DIRS>
-means any of the directories in that environment variable, or just
C</etc/xdg>
+means any of the directories in that environment variable, or just
F</etc/xdg>
if not set)
=back
@@ -1218,7 +1218,7 @@ using the following command:
gpg --clearsign --armor index
-This will create the final file called C<index.asc> which can be
+This will create the final file called F<index.asc> which can be
uploaded to the server (and is the I<uri=..> URL). As noted above,
signing the index file is optional, but recommended.
@@ -1420,7 +1420,7 @@ A tool called L<virt-index-validate(1)> is available
to validate the
index file to ensure it is correct.
Note that the parser and tool can work on either the signed or
-unsigned index file (ie. C<index> or C<index.asc>).
+unsigned index file (ie. F<index> or F<index.asc>).
The index is always encoded in UTF-8.
@@ -1431,8 +1431,8 @@ The index is always encoded in UTF-8.
Since the templates are usually very large, downloaded templates are
cached in the user's home directory.
-The location of the cache is C<$XDG_CACHE_HOME/virt-builder/> or
-C<$HOME/.cache/virt-builder>.
+The location of the cache is F<$XDG_CACHE_HOME/virt-builder/> or
+F<$HOME/.cache/virt-builder>.
You can print out information about the cache directory, including
which guests are currently cached, by doing:
@@ -1494,7 +1494,7 @@ To install a Fedora guest using a local mirror:
=head4 Using a local mirror with Debian
Assuming that you are using C<apt-proxy> to mirror the repository, you
-should create a new C<sources.list> file to point to your proxy (see
+should create a new F<sources.list> file to point to your proxy (see
L<https://help.ubuntu.com/community/AptProxy>) and then do:
virt-builder debian-7 \
@@ -1664,9 +1664,9 @@ SELinux labels correctly in the disk image.
Sometimes fixfiles is not possible during installation, in which case
this option falls back on:
-=item Touching C</.autorelabel>
+=item Touching F</.autorelabel>
-Guest templates may already contain a file called C</.autorelabel>, or
+Guest templates may already contain a file called F</.autorelabel>, or
it is touched if I<--selinux-relabel> cannot run fixfiles.
For guests that use SELinux, this causes fixfiles to run at first
@@ -1727,13 +1727,13 @@ This can point to the directory containing data files
used for Windows
firstboot installation.
Normally you do not need to set this. If not set, a compiled-in
-default will be used (something like C</usr/share/virt-tools>).
+default will be used (something like F</usr/share/virt-tools>).
This directory may contain the following files:
=over 4
-=item C<rhsrvany.exe>
+=item F<rhsrvany.exe>
This is the RHSrvAny Windows binary, used to install a "firstboot"
script in Windows guests. It is required if you intend to use the
diff --git a/builder/virt-index-validate.pod b/builder/virt-index-validate.pod
index d48a93a..7a033e3 100644
--- a/builder/virt-index-validate.pod
+++ b/builder/virt-index-validate.pod
@@ -13,7 +13,7 @@ that it knows how to use. This index file has a specific
format which
virt-index-validate knows how to validate.
Note that virt-index-validate can validate either the signed or
-unsigned index file (ie. either C<index> or C<index.asc>). It can
+unsigned index file (ie. either F<index> or F<index.asc>). It can
only validate a local file, not a URL.
=head1 OPTIONS
diff --git a/cat/virt-cat.pod b/cat/virt-cat.pod
index da9bb9b..acd43e0 100644
--- a/cat/virt-cat.pod
+++ b/cat/virt-cat.pod
@@ -29,7 +29,7 @@ L<guestfish(1)> tool (see L</USING GUESTFISH>
below).
=head1 EXAMPLES
-Display C</etc/fstab> file from inside the libvirt VM called
+Display F</etc/fstab> file from inside the libvirt VM called
C<mydomain>:
virt-cat -d mydomain /etc/fstab
@@ -110,12 +110,12 @@ For example:
virt-cat --format=raw -a disk.img file
-forces raw format (no auto-detection) for C<disk.img>.
+forces raw format (no auto-detection) for F<disk.img>.
virt-cat --format=raw -a disk.img --format -a another.img file
-forces raw format (no auto-detection) for C<disk.img> and reverts to
-auto-detection for C<another.img>.
+forces raw format (no auto-detection) for F<disk.img> and reverts to
+auto-detection for F<another.img>.
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
@@ -124,7 +124,7 @@ security problem with malicious guests (CVE-2010-3851).
=item B<--keys-from-stdin>
Read key or passphrase parameters from stdin. The default is
-to try to read passphrases from the user by opening C</dev/tty>.
+to try to read passphrases from the user by opening F</dev/tty>.
=item B<-m dev[:mountpoint[:options[:fstype]]]>
@@ -132,7 +132,7 @@ to try to read passphrases from the user by opening
C</dev/tty>.
Mount the named partition or logical volume on the given mountpoint.
-If the mountpoint is omitted, it defaults to C</>.
+If the mountpoint is omitted, it defaults to F</>.
Specifying any mountpoint disables the inspection of the guest and
the mount of its root and all of its mountpoints, so make sure
@@ -205,7 +205,7 @@ journal.
=head1 WINDOWS PATHS
C<virt-cat> has a limited ability to understand Windows drive letters
-and paths (eg. C<E:\foo\bar.txt>).
+and paths (eg. F<E:\foo\bar.txt>).
If and only if the guest is running Windows then:
@@ -262,7 +262,7 @@ file from a disk image directly, use:
guestfish --ro -a disk.img -m /dev/sda1 download file -
-where C<disk.img> is the disk image, C</dev/sda1> is the filesystem
+where F<disk.img> is the disk image, F</dev/sda1> is the filesystem
within the disk image, and C<file> is the full path to the file.
=head1 EXIT STATUS
diff --git a/cat/virt-filesystems.pod b/cat/virt-filesystems.pod
index 00f15dc..fd8e18d 100644
--- a/cat/virt-filesystems.pod
+++ b/cat/virt-filesystems.pod
@@ -64,7 +64,7 @@ I<--physical-volumes>, I<--block-devices> to list
those items.
You can use these options in combination as well (if you want a
combination including filesystems, you have to add I<--filesystems>).
-Notice that some items fall into several categories (eg. C</dev/sda1>
+Notice that some items fall into several categories (eg. F</dev/sda1>
might be both a partition and a filesystem). These items are listed
several times. To get a list which includes absolutely everything
that virt-filesystems knows about, use the I<--all> option.
@@ -184,12 +184,12 @@ For example:
virt-filesystems --format=raw -a disk.img
-forces raw format (no auto-detection) for C<disk.img>.
+forces raw format (no auto-detection) for F<disk.img>.
virt-filesystems --format=raw -a disk.img --format -a another.img
-forces raw format (no auto-detection) for C<disk.img> and reverts to
-auto-detection for C<another.img>.
+forces raw format (no auto-detection) for F<disk.img> and reverts to
+auto-detection for F<another.img>.
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
@@ -204,7 +204,7 @@ In I<--long> mode, display sizes in human-readable
format.
=item B<--keys-from-stdin>
Read key or passphrase parameters from stdin. The default is
-to try to read passphrases from the user by opening C</dev/tty>.
+to try to read passphrases from the user by opening F</dev/tty>.
=item B<-l>
@@ -300,7 +300,7 @@ in future versions of this tool.
The filesystem, partition, block device or LVM name.
For device and partition names these are displayed as canonical
-libguestfs names, so that for example C</dev/sda2> is the second
+libguestfs names, so that for example F</dev/sda2> is the second
partition on the first device.
If the I<--long> option is B<not> specified, then only the name
column
diff --git a/cat/virt-log.pod b/cat/virt-log.pod
index c258cdc..096fcf3 100644
--- a/cat/virt-log.pod
+++ b/cat/virt-log.pod
@@ -14,7 +14,7 @@ C<virt-log> is a command line tool to display the log
files from the
named virtual machine (or disk image).
This tool understands and displays both plain text log files
-(eg. C</var/log/messages>) and binary formats such as the systemd
+(eg. F</var/log/messages>) and binary formats such as the systemd
journal.
To display other types of files, use L<virt-cat(1)>. To copy files
@@ -93,12 +93,12 @@ For example:
virt-log --format=raw -a disk.img
-forces raw format (no auto-detection) for C<disk.img>.
+forces raw format (no auto-detection) for F<disk.img>.
virt-log --format=raw -a disk.img --format -a another.img
-forces raw format (no auto-detection) for C<disk.img> and reverts to
-auto-detection for C<another.img>.
+forces raw format (no auto-detection) for F<disk.img> and reverts to
+auto-detection for F<another.img>.
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
@@ -107,7 +107,7 @@ security problem with malicious guests (CVE-2010-3851).
=item B<--keys-from-stdin>
Read key or passphrase parameters from stdin. The default is
-to try to read passphrases from the user by opening C</dev/tty>.
+to try to read passphrases from the user by opening F</dev/tty>.
=item B<-v>
diff --git a/cat/virt-ls.pod b/cat/virt-ls.pod
index aa7919d..e9a226d 100644
--- a/cat/virt-ls.pod
+++ b/cat/virt-ls.pod
@@ -332,12 +332,12 @@ For example:
virt-ls --format=raw -a disk.img /dir
-forces raw format (no auto-detection) for C<disk.img>.
+forces raw format (no auto-detection) for F<disk.img>.
virt-ls --format=raw -a disk.img --format -a another.img /dir
-forces raw format (no auto-detection) for C<disk.img> and reverts to
-auto-detection for C<another.img>.
+forces raw format (no auto-detection) for F<disk.img> and reverts to
+auto-detection for F<another.img>.
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
@@ -355,7 +355,7 @@ L</RECURSIVE LONG LISTING> above.
=item B<--keys-from-stdin>
Read key or passphrase parameters from stdin. The default is
-to try to read passphrases from the user by opening C</dev/tty>.
+to try to read passphrases from the user by opening F</dev/tty>.
=item B<-m dev[:mountpoint[:options[:fstype]]]>
@@ -363,7 +363,7 @@ to try to read passphrases from the user by opening
C</dev/tty>.
Mount the named partition or logical volume on the given mountpoint.
-If the mountpoint is omitted, it defaults to C</>.
+If the mountpoint is omitted, it defaults to F</>.
Specifying any mountpoint disables the inspection of the guest and
the mount of its root and all of its mountpoints, so make sure
diff --git a/customize/virt-customize.pod b/customize/virt-customize.pod
index dc64bf9..838e40c 100644
--- a/customize/virt-customize.pod
+++ b/customize/virt-customize.pod
@@ -106,12 +106,12 @@ For example:
virt-customize --format raw -a disk.img
-forces raw format (no auto-detection) for C<disk.img>.
+forces raw format (no auto-detection) for F<disk.img>.
virt-customize --format raw -a disk.img --format auto -a another.img
-forces raw format (no auto-detection) for C<disk.img> and reverts to
-auto-detection for C<another.img>.
+forces raw format (no auto-detection) for F<disk.img> and reverts to
+auto-detection for F<another.img>.
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
@@ -231,13 +231,13 @@ This can point to the directory containing data files used
for Windows
firstboot installation.
Normally you do not need to set this. If not set, a compiled-in
-default will be used (something like C</usr/share/virt-tools>).
+default will be used (something like F</usr/share/virt-tools>).
This directory may contain the following files:
=over 4
-=item C<rhsrvany.exe>
+=item F<rhsrvany.exe>
This is the RHSrvAny Windows binary, used to install a "firstboot"
script in Windows guests. It is required if you intend to use the
diff --git a/daemon/guestfsd.pod b/daemon/guestfsd.pod
index 0f9c8b0..1ed31a9 100644
--- a/daemon/guestfsd.pod
+++ b/daemon/guestfsd.pod
@@ -17,13 +17,13 @@ does in both the libguestfs appliance and when using
libguestfs live.
For the architecture of the libguestfs appliance, see
L<guestfs(3)/ARCHITECTURE>.
-After the appliance boots, the C</init> script in the appliance starts
+After the appliance boots, the F</init> script in the appliance starts
C<guestfsd> with no arguments. C<guestfsd> opens the virtio-serial
port on a known path (see L</FILES>). It initiates the protocol (see
L<guestfs(3)/COMMUNICATION PROTOCOL>) and processes requests one at a
time from the library until the appliance is destroyed.
-Filesystems are mounted under C</sysroot> and all filesystem
+Filesystems are mounted under F</sysroot> and all filesystem
operations happen relative to this directory.
=head2 LIBGUESTFS LIVE
@@ -32,7 +32,7 @@ In the libguestfs live case, C<guestfsd -r> is started
from the
rc-scripts, systemd, etc.
The C<-r> option causes the daemon to operate on the root filesystem
-instead of C</sysroot>.
+instead of F</sysroot>.
Currently (because of limitations in virtio-serial) only one client
can connect at a time, and C<guestfsd> must be restarted after each
@@ -52,8 +52,8 @@ Display brief help.
=item B<-r>
-Set the root filesystem to be C</> (instead of the default which is
-C</sysroot>). Also do not unmount filesystems when the daemon exits.
+Set the root filesystem to be F</> (instead of the default which is
+F</sysroot>). Also do not unmount filesystems when the daemon exits.
This option is used to enable libguestfs live.
@@ -77,11 +77,11 @@ error.
=over 4
-=item C</dev/virtio-ports/org.libguestfs.channel.0>
+=item F</dev/virtio-ports/org.libguestfs.channel.0>
The virtio serial port which C<guestfsd> connects to.
-=item C</proc/cmdline>
+=item F</proc/cmdline>
The Linux command line is parsed to discover C<guestfs_*> flags. The
following flags are understood:
@@ -99,7 +99,7 @@ information.
=item B<guestfs_channel=PATH>
Set the path to the virtio-serial channel to something other than the
-default (which is C</dev/virtio-ports/org.libguestfs.channel.0>).
+default (which is F</dev/virtio-ports/org.libguestfs.channel.0>).
This is used by the User-Mode Linux backend to use a regular emulated
serial port instead of virtio-serial.
diff --git a/df/virt-df.pod b/df/virt-df.pod
index 331f6fc..3f7fc3f 100644
--- a/df/virt-df.pod
+++ b/df/virt-df.pod
@@ -52,7 +52,7 @@ output human-readable:
F14x64:/dev/sda1 484M 66M 393M 14%
F14x64:/dev/vg_f13x64/lv_root 7.4G 3.4G 4.0G 46%
-Show disk usage for a disk image file called C<test.img>:
+Show disk usage for a disk image file called F<test.img>:
$ virt-df -a test1.img
Filesystem 1K-blocks Used Available Use%
@@ -129,12 +129,12 @@ For example:
virt-df --format=raw -a disk.img
-forces raw format (no auto-detection) for C<disk.img>.
+forces raw format (no auto-detection) for F<disk.img>.
virt-df --format=raw -a disk.img --format -a another.img
-forces raw format (no auto-detection) for C<disk.img> and reverts to
-auto-detection for C<another.img>.
+forces raw format (no auto-detection) for F<disk.img> and reverts to
+auto-detection for F<another.img>.
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
@@ -212,7 +212,7 @@ Run this command:
guestfish --ro -d GuestName -i statvfs /
-(change C</> to see stats for other filesystems).
+(change F</> to see stats for other filesystems).
=item From inside the guest
@@ -220,7 +220,7 @@ Run this command:
python -c 'import os; s = os.statvfs ("/"); print s'
-(change C</> to see stats for other filesystems).
+(change F</> to see stats for other filesystems).
=back
diff --git a/diff/virt-diff.pod b/diff/virt-diff.pod
index 22e0aa0..afab185 100644
--- a/diff/virt-diff.pod
+++ b/diff/virt-diff.pod
@@ -149,12 +149,12 @@ For example:
virt-diff --format=raw -a disk.img [...]
-forces raw format (no auto-detection) for C<disk.img>.
+forces raw format (no auto-detection) for F<disk.img>.
virt-diff --format=raw -a disk.img --format -a another.img [...]
-forces raw format (no auto-detection) for C<disk.img> and reverts to
-auto-detection for C<another.img>.
+forces raw format (no auto-detection) for F<disk.img> and reverts to
+auto-detection for F<another.img>.
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
@@ -169,7 +169,7 @@ Display file sizes in human-readable format.
=item B<--keys-from-stdin>
Read key or passphrase parameters from stdin. The default is
-to try to read passphrases from the user by opening C</dev/tty>.
+to try to read passphrases from the user by opening F</dev/tty>.
=item B<--times>
diff --git a/edit/virt-edit.pod b/edit/virt-edit.pod
index 537fee0..57b9142 100644
--- a/edit/virt-edit.pod
+++ b/edit/virt-edit.pod
@@ -148,12 +148,12 @@ For example:
virt-edit --format=raw -a disk.img file
-forces raw format (no auto-detection) for C<disk.img>.
+forces raw format (no auto-detection) for F<disk.img>.
virt-edit --format=raw -a disk.img --format -a another.img file
-forces raw format (no auto-detection) for C<disk.img> and reverts to
-auto-detection for C<another.img>.
+forces raw format (no auto-detection) for F<disk.img> and reverts to
+auto-detection for F<another.img>.
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
@@ -162,7 +162,7 @@ security problem with malicious guests (CVE-2010-3851).
=item B<--keys-from-stdin>
Read key or passphrase parameters from stdin. The default is
-to try to read passphrases from the user by opening C</dev/tty>.
+to try to read passphrases from the user by opening F</dev/tty>.
=item B<-m dev[:mountpoint[:options[:fstype]]]>
@@ -170,7 +170,7 @@ to try to read passphrases from the user by opening
C</dev/tty>.
Mount the named partition or logical volume on the given mountpoint.
-If the mountpoint is omitted, it defaults to C</>.
+If the mountpoint is omitted, it defaults to F</>.
Specifying any mountpoint disables the inspection of the guest and
the mount of its root and all of its mountpoints, so make sure
@@ -299,7 +299,7 @@ file):
=head1 WINDOWS PATHS
C<virt-edit> has a limited ability to understand Windows drive letters
-and paths (eg. C<E:\foo\bar.txt>).
+and paths (eg. F<E:\foo\bar.txt>).
If and only if the guest is running Windows then:
@@ -345,7 +345,7 @@ Using C<virt-edit> is approximately equivalent to
doing:
guestfish --rw -i -d domname edit /file
-where C<domname> is the name of the libvirt guest, and C</file> is
the
+where C<domname> is the name of the libvirt guest, and F</file> is
the
full path to the file.
The command above uses libguestfs's guest inspection feature and so
@@ -355,8 +355,8 @@ on a disk image directly, use:
guestfish --rw -a disk.img -m /dev/sda1 edit /file
-where C<disk.img> is the disk image, C</dev/sda1> is the filesystem
-within the disk image to edit, and C</file> is the full path to the
+where F<disk.img> is the disk image, F</dev/sda1> is the filesystem
+within the disk image to edit, and F</file> is the full path to the
file.
C<virt-edit> cannot create new files. Use the guestfish commands
diff --git a/examples/guestfs-faq.pod b/examples/guestfs-faq.pod
index 4862f65..af99d39 100644
--- a/examples/guestfs-faq.pod
+++ b/examples/guestfs-faq.pod
@@ -202,7 +202,7 @@ can access them.
=item *
-(Nasty) Edit C</etc/libvirt/qemu.conf> and change the C<user>
setting.
+(Nasty) Edit F</etc/libvirt/qemu.conf> and change the C<user>
setting.
=back
@@ -223,15 +223,15 @@ appliance:
[...followed by a lot of debug output...]
This is a complicated bug related to L<supermin(1)> appliances. The
-appliance is constructed by copying files like C</bin/bash> and many
+appliance is constructed by copying files like F</bin/bash> and many
libraries from the host. The file C<hostfiles> lists the files that
should be copied from the host into the appliance. If some files
don't exist on the host then they are missed out, but if these files
-are needed in order to (eg) run C</bin/bash> then you'll see the
above
+are needed in order to (eg) run F</bin/bash> then you'll see the
above
error.
Diagnosing the problem involves studying the libraries needed by
-C</bin/bash>, ie:
+F</bin/bash>, ie:
ldd /bin/bash
@@ -240,7 +240,7 @@ the host filesystem, and with the debug output printed in
the error
message. Once you've worked out which file is missing, install that
file using your package manager and try again.
-You should also check that files like C</init> and C</bin/bash> (in
+You should also check that files like F</init> and F</bin/bash> (in
the appliance) are executable. The debug output shows file modes.
=head1 DOWNLOADING, INSTALLING, COMPILING LIBGUESTFS
@@ -468,7 +468,7 @@ There is one known shortcoming: L<virt-rescue(1)> will
not use libvirt
currently get the benefit of sVirt protection when using virt-rescue.
You can check if sVirt is being used by enabling libvirtd logging (see
-C</etc/libvirt/libvirtd.log>), killing and restarting libvirtd, and
+F</etc/libvirt/libvirtd.log>), killing and restarting libvirtd, and
checking the log files for S<"Setting SELinux context on ...">
messages.
In theory sVirt should support AppArmor, but we have not tried it. It
@@ -604,7 +604,7 @@ libguestfs caches a large-ish appliance in:
/var/tmp/.guestfs-<UID>
If the environment variable C<TMPDIR> is defined, then
-C<$TMPDIR/.guestfs-E<lt>UIDE<gt>> is used instead.
+F<$TMPDIR/.guestfs-E<lt>UIDE<gt>> is used instead.
It is safe to delete this directory when you are not using libguestfs.
@@ -712,7 +712,7 @@ but in the meantime you have three options:
=item 1.
If the guest is hosted on a live, reachable ESX server, then locate
-and download the disk image called I<somename>C<-flat.vmdk>.
Despite
+and download the disk image called F<I<somename>-flat.vmdk>.
Despite
the name, this is a raw disk image, and can be opened by anything.
If you have a recent enough version of qemu and libguestfs, then you
@@ -960,7 +960,7 @@ calling launch.
Use the event API. For examples, see:
L<guestfs(3)/SETTING CALLBACKS TO HANDLE EVENTS> and the
-C<examples/debug-logging.c> program in the libguestfs sources.
+F<examples/debug-logging.c> program in the libguestfs sources.
=head2 Digging deeper into the appliance boot process.
@@ -976,17 +976,17 @@ of L<libguestfs-test-tool(1)>.
=head2 Debugging libvirt
If you are using the libvirt backend, and libvirt is failing, then you
-can enable debugging by editing C</etc/libvirt/libvirtd.conf>.
+can enable debugging by editing F</etc/libvirt/libvirtd.conf>.
If you are running as non-root, then you have to edit a different
-file. Create C<~/.config/libvirt/libvirtd.conf> containing:
+file. Create F<~/.config/libvirt/libvirtd.conf> containing:
log_level=1
log_outputs="1:file:/tmp/libvirtd.log"
Kill any session (non-root) libvirtd that is running, and next time
you run the libguestfs command, you should see a large amount of
-useful debugging information from libvirtd in C</tmp/libvirtd.log>
+useful debugging information from libvirtd in F</tmp/libvirtd.log>
=head1 DESIGN/INTERNALS OF LIBGUESTFS
@@ -1096,7 +1096,7 @@ What you have to do is to create a point-in-time snapshot.
If it's a
logical volume, use an LVM2 snapshot. If the filesystem is located
inside something like a btrfs/ZFS file, use a btrfs/ZFS snapshot, and
then run the fsck on the snapshot. In practice you don't need to use
-libguestfs for this -- just run C</sbin/fsck> directly.
+libguestfs for this -- just run F</sbin/fsck> directly.
Creating point-in-time snapshots of host devices and files is outside
the scope of libguestfs, although libguestfs can operate on them once
@@ -1179,7 +1179,7 @@ Users expect some tools (like L<virt-cat(1)>) to
work with VM paths:
virt-cat fedora.img /var/log/messages
-How does virt-cat know that C</var> is a separate partition? The
+How does virt-cat know that F</var> is a separate partition? The
trick is that virt-cat performs inspection on the disk image, and uses
that to translate the path correctly.
diff --git a/examples/guestfs-performance.pod b/examples/guestfs-performance.pod
index abddcc8..7cf10aa 100644
--- a/examples/guestfs-performance.pod
+++ b/examples/guestfs-performance.pod
@@ -34,7 +34,7 @@ runs, so that you are measuring a typical "hot
cache" case.
This command starts up the libguestfs appliance on a null disk, and
then immediately shuts it down. The first time you run the command,
it will create an appliance and cache it (usually under
-C</var/tmp/.guestfs-*>). Subsequent runs should reuse the cached
+F</var/tmp/.guestfs-*>). Subsequent runs should reuse the cached
appliance.
=head3 Expected results
@@ -70,7 +70,7 @@ L<guestfs(3)/INSPECTION>), mounts the guest's disks,
then discards all
these results and shuts down.
The first time you run the command, it will create an appliance and
-cache it (usually under C</var/tmp/.guestfs-*>). Subsequent runs
+cache it (usually under F</var/tmp/.guestfs-*>). Subsequent runs
should reuse the cached appliance.
=head3 Expected results
@@ -83,7 +83,7 @@ seconds).
=head1 UNDERSTANDING THE APPLIANCE AND WHEN IT IS BUILT/CACHED
The first time you use libguestfs, it will build and cache an
-appliance. This is usually in C</var/tmp/.guestfs-*>, unless you have
+appliance. This is usually in F</var/tmp/.guestfs-*>, unless you have
set C<$TMPDIR> or C<$LIBGUESTFS_CACHEDIR> in which case it will be
under that temporary directory.
@@ -115,7 +115,7 @@ host will cause a one time rebuild of the appliance.
=item *
-C</var/tmp> (or C<$TMPDIR>, C<$LIBGUESTFS_CACHEDIR>) should
be on a
+F</var/tmp> (or C<$TMPDIR>, C<$LIBGUESTFS_CACHEDIR>) should
be on a
fast disk, and have plenty of space for the appliance.
=back
@@ -131,8 +131,8 @@ To build the appliance, run the command:
replacing C<E<lt>directoryE<gt>> with the name of a directory
where
the appliance will be stored (normally you would name a subdirectory,
-for example: C</usr/local/lib/guestfs/appliance> or
-C</dev/shm/appliance>).
+for example: F</usr/local/lib/guestfs/appliance> or
+F</dev/shm/appliance>).
Then set C<$LIBGUESTFS_PATH> (and ensure this environment variable is
set in your libguestfs program), or modify your program so it calls
@@ -151,7 +151,7 @@ L<libguestfs-make-fixed-appliance(1)>).
In our testing we did not find that using a fixed appliance gave any
measurable performance benefit, even when the appliance was located in
-memory (ie. on C</dev/shm>). However there are two points to
+memory (ie. on F</dev/shm>). However there are two points to
consider:
=over 4
@@ -399,7 +399,7 @@
L<http://rwmj.wordpress.com/2013/08/14/performance-of-user-mode-linux-as-a-libgu
=head2 ENSURE HARDWARE VIRTUALIZATION IS AVAILABLE
-Use C</proc/cpuinfo> and this page:
+Use F</proc/cpuinfo> and this page:
http://virt-tools.org/learning/check-hardware-virt/
@@ -414,7 +414,7 @@ no substitute for running libguestfs on baremetal.
=head2 ENSURE KVM IS AVAILABLE
Ensure that KVM is enabled and available to the user that will run
-libguestfs. It should be safe to set 0666 permissions on C</dev/kvm>
+libguestfs. It should be safe to set 0666 permissions on F</dev/kvm>
and most distributions now do this.
=head2 PROCESSORS TO AVOID
@@ -449,7 +449,7 @@ The timestamps are seconds (incrementally since the previous
line).
You can use SystemTap (L<stap(1)>) to get detailed timings from
libguestfs programs.
-Save the following script as C<time.stap>:
+Save the following script as F<time.stap>:
global last;
diff --git a/examples/guestfs-recipes.pod b/examples/guestfs-recipes.pod
index 2b253e6..2491c25 100644
--- a/examples/guestfs-recipes.pod
+++ b/examples/guestfs-recipes.pod
@@ -49,7 +49,7 @@ To checksum a whole device, or a partition, LV etc within a
disk image:
Replace C<md5> with the type of checksum you want. See
L<guestfs(3)/guestfs_checksum_device> for a list of supported types.
-C</dev/sda1> means "the first partition". You could use
C</dev/sda>
+F</dev/sda1> means "the first partition". You could use
F</dev/sda>
to checksum the whole disk image, or the name of a logical volume or
RAID device.
@@ -72,11 +72,11 @@ For more details, see: L<virt-sysprep(1)/COPYING AND
CLONING>.
=head1 Convert a CD-ROM / DVD / ISO to a tarball
-This converts input C<cd.iso> to output C<cd.tar.gz>:
+This converts input F<cd.iso> to output F<cd.tar.gz>:
guestfish --ro -a cd.iso -m /dev/sda tgz-out / cd.tar.gz
-To export just a subdirectory, eg. C</files>, do:
+To export just a subdirectory, eg. F</files>, do:
guestfish --ro -a cd.iso -m /dev/sda tgz-out /files cd.tar.gz
@@ -251,7 +251,7 @@ like this:
=head1 Export any directory from a VM
-To export C</home> from a VM into a local directory use
+To export F</home> from a VM into a local directory use
L<virt-copy-out(1)>:
virt-copy-out -d Guest /home .
@@ -332,11 +332,11 @@ getting the last assigned DHCP address of a virtual
machine.
L<https://rwmj.wordpress.com/2011/03/31/tip-code-for-getting-dhcp-address-from-a-virtual-machine-disk-image/#content>
In the libguestfs source examples directory you will find the latest
-version of the C<virt-dhcp-address.c> program.
+version of the F<virt-dhcp-address.c> program.
=head1 Get the operating system product name string
-Save the following script into a file called C<product-name.sh>:
+Save the following script into a file called F<product-name.sh>:
#!/bin/sh -
set -e
@@ -480,12 +480,12 @@ SYSLINUX bootloader using either the guestfish commands
C<syslinux>
(for FAT-based guests) or C<extlinux> (for ext2/3/4 and btrfs-based
guests).
-This guide assumes a Linux guest where C</dev/sda1> is C</boot>,
-C</boot/vmlinuz> is the guest kernel, and C</dev/sda3> is the root
+This guide assumes a Linux guest where F</dev/sda1> is F</boot>,
+F</boot/vmlinuz> is the guest kernel, and F</dev/sda3> is the root
partition. For a Windows guest you would need a FAT-formatted boot
partition and you would need to use the C<syslinux> command instead.
-Create a C<syslinux.cfg> configuration file. You should check the
+Create a F<syslinux.cfg> configuration file. You should check the
SYSLINUX documentation at L<http://www.syslinux.org> but it may look
something like this:
@@ -497,7 +497,7 @@ something like this:
APPEND ro root=/dev/sda3
Locate the syslinux master boot record (a file called something like
-C</usr/share/syslinux/mbr.bin>).
+F</usr/share/syslinux/mbr.bin>).
guestfish -a disk.img -i
# Upload the master boot record and configuration file:
@@ -515,7 +515,7 @@
L<http://rwmj.wordpress.com/2013/04/04/new-in-libguestfs-use-syslinux-or-extlinu
=head1 List applications installed in a VM
-Save the following to a file C<list-apps.sh>:
+Save the following to a file F<list-apps.sh>:
#!/bin/sh -
set -e
diff --git a/examples/guestfs-testing.pod b/examples/guestfs-testing.pod
index 2186ed3..2528604 100644
--- a/examples/guestfs-testing.pod
+++ b/examples/guestfs-testing.pod
@@ -170,7 +170,7 @@ into a guest or disk image.
virt-copy-in -d Guest /etc /tmp
-This should copy local directory C</etc> to C</tmp/etc> in the
guest
+This should copy local directory F</etc> to F</tmp/etc> in the
guest
(recursively). If you boot the guest, can you see all of the copied
files and directories?
@@ -187,7 +187,7 @@ out of a guest or disk image.
Note the final space and period in the command is not a typo.
-This should copy C</home> from the guest into the current directory.
+This should copy F</home> from the guest into the current directory.
=head2 Run virt-df.
@@ -349,7 +349,7 @@ Using L<virt-sparsify(1)>, make a disk image more
sparse:
virt-sparsify /path/to/olddisk.img newdisk.img
-Is C<newdisk.img> still bootable after sparsifying? Is the resulting
+Is F<newdisk.img> still bootable after sparsifying? Is the resulting
disk image smaller (use C<du> to check)?
=head2 B<*> "sysprep" a B<shut off> Linux guest.
diff --git a/fish/guestfish.pod b/fish/guestfish.pod
index 20c3544..8d6e0fa 100644
--- a/fish/guestfish.pod
+++ b/fish/guestfish.pod
@@ -64,7 +64,7 @@ L<virt-rescue(1)> command.
=head2 From shell scripts
-Create a new C</etc/motd> file in a guest or disk image:
+Create a new F</etc/motd> file in a guest or disk image:
guestfish <<_EOF_
add disk.img
@@ -89,13 +89,13 @@ List all the filesystems in a disk image:
=head2 On one command line
-Update C</etc/resolv.conf> in a guest:
+Update F</etc/resolv.conf> in a guest:
guestfish \
add disk.img : run : mount /dev/vg_guest/lv_root / : \
write /etc/resolv.conf "nameserver 1.2.3.4"
-Edit C</boot/grub/grub.conf> interactively:
+Edit F</boot/grub/grub.conf> interactively:
guestfish --rw --add disk.img \
--mount /dev/vg_guest/lv_root \
@@ -111,7 +111,7 @@ disks from a virtual machine:
guestfish --ro -d libvirt-domain -i cat /etc/group
-Another way to edit C</boot/grub/grub.conf> interactively is:
+Another way to edit F</boot/grub/grub.conf> interactively is:
guestfish --rw -a disk.img -i edit /boot/grub/grub.conf
@@ -127,7 +127,7 @@ Create a 100MB disk containing an ext2-formatted partition:
=head2 Start with a prepared disk
-An alternate way to create a 100MB disk called C<test1.img> containing
+An alternate way to create a 100MB disk called F<test1.img> containing
a single ext2-formatted partition:
guestfish -N fs
@@ -244,12 +244,12 @@ For example:
guestfish --format=raw -a disk.img
-forces raw format (no auto-detection) for C<disk.img>.
+forces raw format (no auto-detection) for F<disk.img>.
guestfish --format=raw -a disk.img --format -a another.img
-forces raw format (no auto-detection) for C<disk.img> and reverts to
-auto-detection for C<another.img>.
+forces raw format (no auto-detection) for F<disk.img> and reverts to
+auto-detection for F<another.img>.
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
@@ -290,7 +290,7 @@ were found.
=item B<--keys-from-stdin>
Read key or passphrase parameters from stdin. The default is
-to try to read passphrases from the user by opening C</dev/tty>.
+to try to read passphrases from the user by opening F</dev/tty>.
=item B<--listen>
@@ -308,9 +308,9 @@ Connect to a live virtual machine.
Mount the named partition or logical volume on the given mountpoint.
-If the mountpoint is omitted, it defaults to C</>.
+If the mountpoint is omitted, it defaults to F</>.
-You have to mount something on C</> before most commands will work.
+You have to mount something on F</> before most commands will work.
If any I<-m> or I<--mount> options are given, the guest is
automatically launched.
@@ -736,7 +736,7 @@ following will not do what you expect:
rm-rf /home/*
-Assuming you don't have a directory called literally C</home/*>
+Assuming you don't have a directory called literally F</home/*>
then the above command will return an error.
To perform wildcard expansion, use the C<glob> command.
@@ -770,15 +770,15 @@ Blank lines are also ignored.
=head1 RUNNING COMMANDS LOCALLY
Any line which starts with a I<!> character is treated as a command
-sent to the local shell (C</bin/sh> or whatever L<system(3)> uses).
+sent to the local shell (F</bin/sh> or whatever L<system(3)> uses).
For example:
!mkdir local
tgz-out /remote local/remote-data.tar.gz
will create a directory C<local> on the host, and then export
-the contents of C</remote> on the mounted filesystem to
-C<local/remote-data.tar.gz>. (See C<tgz-out>).
+the contents of F</remote> on the mounted filesystem to
+F<local/remote-data.tar.gz>. (See C<tgz-out>).
To change the local directory, use the C<lcd> command. C<!cd> will
have no effect, due to the way that subprocesses work in Unix.
@@ -793,13 +793,13 @@ Thus you can use shell script to construct arbitrary
guestfish
commands which are then parsed by guestfish.
For example it is tedious to create a sequence of files
-(eg. C</foo.1> through C</foo.100>) using guestfish commands
+(eg. F</foo.1> through F</foo.100>) using guestfish commands
alone. However this is simple if we use a shell script to
create the guestfish commands for us:
<! for n in `seq 1 100`; do echo write /foo.$n $n; done
-or with names like C</foo.001>:
+or with names like F</foo.001>:
<! for n in `seq 1 100`; do printf "write /foo.%03d %d\n" $n $n;
done
@@ -863,7 +863,7 @@ Identify encrypted block devices and partitions using
L</vfs-type>:
crypto_LUKS
Then open those devices using L</luks-open>. This creates a
-device-mapper device called C</dev/mapper/luksdev>.
+device-mapper device called F</dev/mapper/luksdev>.
><fs> luks-open /dev/sda2 luksdev
Enter key or passphrase ("key"): <enter the passphrase>
@@ -899,7 +899,7 @@ The parameter is rewritten "behind the scenes" by
looking up the
position where the drive is mounted, prepending that to the path,
changing all backslash characters to forward slash, then resolving the
result using L</case-sensitive-path>. For example if the E: drive
-was mounted on C</e> then the parameter might be rewritten like this:
+was mounted on F</e> then the parameter might be rewritten like this:
win:e:\foo\bar => /e/FOO/bar
@@ -913,7 +913,7 @@ special filename C<-> to mean "from stdin"
or "to stdout". For example:
upload - /foo
-reads stdin and creates from that a file C</foo> in the disk image,
+reads stdin and creates from that a file F</foo> in the disk image,
and:
tar-out /etc - | tar tf -
@@ -996,7 +996,7 @@ I<--csh> option:
=head2 REMOTE CONTROL DETAILS
Remote control happens over a Unix domain socket called
-C</tmp/.guestfish-$UID/socket-$PID>, where C<$UID> is the effective
+F</tmp/.guestfish-$UID/socket-$PID>, where C<$UID> is the effective
user ID of the process, and C<$PID> is the process ID of the server.
Guestfish client and server versions must match exactly.
@@ -1074,7 +1074,7 @@ make for you to save typing. This is particularly useful
for testing
purposes. This option is used instead of the I<-a> option, and like
I<-a> can appear multiple times (and can be mixed with I<-a>).
-The new disk is called C<test1.img> for the first I<-N>,
C<test2.img>
+The new disk is called F<test1.img> for the first I<-N>,
F<test2.img>
for the second and so on. Existing files in the current directory are
I<overwritten>. You can use a different filename by specifying
C<filename=> before the type (see examples below).
@@ -1097,7 +1097,7 @@ is automatically launched.
=head2 EXAMPLES
Create a 100MB disk with an ext4-formatted partition, called
-C<test1.img> in the current directory:
+F<test1.img> in the current directory:
guestfish -N fs:ext4
@@ -1109,8 +1109,8 @@ Create a blank 200MB disk:
guestfish -N disk:200M
-Create a blank 200MB disk called C<blankdisk.img> (instead of
-C<test1.img>):
+Create a blank 200MB disk called F<blankdisk.img> (instead of
+F<test1.img>):
guestfish -N blankdisk.img=disk:200M
@@ -1138,7 +1138,7 @@ The possible I<-a URI> formats are described below.
=head2 B<-a file:///path/to/disk.img>
-Add the local disk image (or device) called C<disk.img>.
+Add the local disk image (or device) called F<disk.img>.
=head2 B<-a ftp://[user@]example.com[:port]/disk.img>
@@ -1454,7 +1454,7 @@ using a supermin appliance. The appliance is cached and
shared
between all handles which have the same effective user ID.
If C<LIBGUESTFS_CACHEDIR> is not set, then C<TMPDIR> is used. If
-C<TMPDIR> is not set, then C</var/tmp> is used.
+C<TMPDIR> is not set, then F</var/tmp> is used.
See also L</LIBGUESTFS_TMPDIR>, L</set-cachedir>.
@@ -1491,7 +1491,7 @@ The location where libguestfs will store temporary files
used
by each handle.
If C<LIBGUESTFS_TMPDIR> is not set, then C<TMPDIR> is used. If
-C<TMPDIR> is not set, then C</tmp> is used.
+C<TMPDIR> is not set, then F</tmp> is used.
See also L</LIBGUESTFS_CACHEDIR>, L</set-tmpdir>.
@@ -1585,8 +1585,8 @@ to make guestfish case sensitive.
=item test2.img (etc)
When using the I<-N> or I<--new> option, the prepared disk or
-filesystem will be created in the file C<test1.img> in the current
-directory. The second use of I<-N> will use C<test2.img> and so
on.
+filesystem will be created in the file F<test1.img> in the current
+directory. The second use of I<-N> will use F<test2.img> and so
on.
Any existing file with the same name will be overwritten. You can use
a different filename by using the C<filename=> prefix.
diff --git a/fish/libguestfs-tools.conf.pod b/fish/libguestfs-tools.conf.pod
index d3555ec..bae3f30 100644
--- a/fish/libguestfs-tools.conf.pod
+++ b/fish/libguestfs-tools.conf.pod
@@ -14,7 +14,7 @@ libguestfs-tools.conf - configuration file for guestfish,
guestmount, virt-rescu
=head1 DESCRIPTION
-C<libguestfs-tools.conf> (or C<$HOME/.libguestfs-tools.rc>) changes
the
+F<libguestfs-tools.conf> (or F<$HOME/.libguestfs-tools.rc>) changes
the
defaults for the following programs only:
=over 4
@@ -60,7 +60,7 @@ The order of the configuration files being read is, by
importance:
=item *
$XDG_CONFIG_HOME/libguestfs/libguestfs-tools.conf (C<$XDG_CONFIG_HOME> is
-C<$HOME/.config> if not set).
+F<$HOME/.config> if not set).
=item *
@@ -69,7 +69,7 @@ $HOME/.libguestfs-tools.rc
=item *
$XDG_CONFIG_DIRS/libguestfs/libguestfs-tools.conf (where
C<$XDG_CONFIG_DIRS>
-means any of the directories in that environment variable, or just
C</etc/xdg>
+means any of the directories in that environment variable, or just
F</etc/xdg>
if not set)
=item *
@@ -80,9 +80,9 @@ if not set)
This means local users can override the system configuration by copying
the configuration file (or creating it anew) into
-C<$XDG_CONFIG_HOME/libguestfs/libguestfs-tools.conf>.
+F<$XDG_CONFIG_HOME/libguestfs/libguestfs-tools.conf>.
-C</etc/libguestfs-tools.conf> and C<$HOME/.libguestfs-tools.rc> are
the old
+F</etc/libguestfs-tools.conf> and F<$HOME/.libguestfs-tools.rc> are
the old
non-XDG paths which are read for compatibility.
=head1 SEE ALSO
diff --git a/fish/virt-copy-in.pod b/fish/virt-copy-in.pod
index 3891ce5..37d96df 100644
--- a/fish/virt-copy-in.pod
+++ b/fish/virt-copy-in.pod
@@ -22,11 +22,11 @@ a virtual machine disk image or named libvirt domain.
You can give one of more filenames and directories on the command
line. Directories are copied in recursively. The final parameter
must be the destination directory in the disk image which must be an
-absolute path starting with a C</> character.
+absolute path starting with a F</> character.
=head1 EXAMPLES
-Update C</etc/resolv.conf> in a guest:
+Update F</etc/resolv.conf> in a guest:
virt-copy-in -d MyGuest resolv.conf /etc
diff --git a/format/virt-format.pod b/format/virt-format.pod
index caec411..2f83203 100644
--- a/format/virt-format.pod
+++ b/format/virt-format.pod
@@ -25,7 +25,7 @@ or this:
virt-format -a /dev/VG/LV
-C<disk.qcow> or C</dev/VG/LV> must exist already. B<Any data on
these
+F<disk.qcow> or F</dev/VG/LV> must exist already. B<Any data on
these
disks will be erased by these commands>. These commands will create a
single empty partition covering the whole disk, with no filesystem
inside it.
@@ -101,12 +101,12 @@ For example:
virt-format --format=raw -a disk.img
-forces raw format (no auto-detection) for C<disk.img>.
+forces raw format (no auto-detection) for F<disk.img>.
virt-format --format=raw -a disk.img --format -a another.img
-forces raw format (no auto-detection) for C<disk.img> and reverts to
-auto-detection for C<another.img>.
+forces raw format (no auto-detection) for F<disk.img> and reverts to
+auto-detection for F<another.img>.
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
@@ -118,13 +118,13 @@ Set the filesystem label.
=item B<--lvm=/dev/I<VG>/I<LV>>
-Create a Linux LVM2 logical volume called
C</dev/I<VG>/I<LV>>. You
+Create a Linux LVM2 logical volume called
F</dev/I<VG>/I<LV>>. You
can change the name of the volume group and logical volume.
=item B<--lvm>
Create a Linux LVM2 logical volume with the default name
-(C</dev/VG/LV>).
+(F</dev/VG/LV>).
=item B<--lvm=none>
diff --git a/fuse/guestmount.pod b/fuse/guestmount.pod
index 0db5c6c..6dedf70 100644
--- a/fuse/guestmount.pod
+++ b/fuse/guestmount.pod
@@ -31,7 +31,7 @@ manual page, or by looking at the examples below.
FUSE lets you mount filesystems as non-root. The mountpoint must be
owned by you, and the filesystem will not be visible to any other
users unless you make certain global configuration changes to
-C</etc/fuse.conf>. To unmount the filesystem, use the
+F</etc/fuse.conf>. To unmount the filesystem, use the
L<guestunmount(1)> command.
=head1 EXAMPLES
@@ -252,7 +252,7 @@ mounted on the real virtual machine.
=item B<--keys-from-stdin>
Read key or passphrase parameters from stdin. The default is
-to try to read passphrases from the user by opening C</dev/tty>.
+to try to read passphrases from the user by opening F</dev/tty>.
=item B<--live>
@@ -266,8 +266,8 @@ Connect to a live virtual machine.
Mount the named partition or logical volume on the given mountpoint
B<in the guest> (this has nothing to do with mountpoints in the host).
-If the mountpoint is omitted, it defaults to C</>. You have to mount
-something on C</>.
+If the mountpoint is omitted, it defaults to F</>. You have to mount
+something on F</>.
The third (and rarely used) part of the mount parameter is the list of
mount options used to mount the underlying filesystem. If this is not
diff --git a/generator/actions.ml b/generator/actions.ml
index 7252295..d5e5ccf 100644
--- a/generator/actions.ml
+++ b/generator/actions.ml
@@ -615,7 +615,7 @@ against.
Note that because of dynamic linking this is not necessarily
the version of libguestfs that you compiled against. You can
compile the program, and then at runtime dynamically link
-against a completely different C<libguestfs.so> library.
+against a completely different F<libguestfs.so> library.
This call was added in version C<1.0.58>. In previous
versions of libguestfs there was no way to get the version
@@ -830,7 +830,7 @@ to specify the QEMU interface emulation to use at run
time." };
];
shortdesc = "detect the architecture of a binary file";
longdesc = "\
-This detects the architecture of the binary C<filename>,
+This detects the architecture of the binary F<filename>,
and returns it if known.
Currently defined architectures are:
@@ -1234,23 +1234,23 @@ Please read L<guestfs(3)/INSPECTION> for more
details." };
This returns a hash of where we think the filesystems
associated with this operating system should be mounted.
Callers should note that this is at best an educated guess
-made by reading configuration files such as C</etc/fstab>.
+made by reading configuration files such as F</etc/fstab>.
I<In particular note> that this may return filesystems
which are non-existent or not mountable and callers should
be prepared to handle or ignore failures if they try to
mount them.
Each element in the returned hashtable has a key which
-is the path of the mountpoint (eg. C</boot>) and a value
+is the path of the mountpoint (eg. F</boot>) and a value
which is the filesystem that would be mounted there
-(eg. C</dev/sda1>).
+(eg. F</dev/sda1>).
Non-mounted devices such as swap devices are I<not>
returned in this list.
For operating systems like Windows which still use drive
letters, this call will only return an entry for the first
-drive \"mounted on\" C</>. For information about the
+drive \"mounted on\" F</>. For information about the
mapping of drive letters to partitions, see
C<guestfs_inspect_get_drive_mappings>.
@@ -1342,13 +1342,13 @@ not all belong to a single logical operating system
fish_alias = ["add"];
shortdesc = "add an image to examine or modify";
longdesc = "\
-This function adds a disk image called C<filename> to the handle.
-C<filename> may be a regular host file or a host device.
+This function adds a disk image called F<filename> to the handle.
+F<filename> may be a regular host file or a host device.
When this function is called before C<guestfs_launch> (the
usual case) then the first time you call this function,
-the disk appears in the API as C</dev/sda>, the second time
-as C</dev/sdb>, and so on.
+the disk appears in the API as F</dev/sda>, the second time
+as F</dev/sdb>, and so on.
In libguestfs E<ge> 1.20 you can also call this function
after launch (with some restrictions). This is called
@@ -1362,9 +1362,9 @@ for whatever operations you want to perform (ie. read
access if you
just want to read the image or write access if you want to modify the
image).
-This call checks that C<filename> exists.
+This call checks that F<filename> exists.
-C<filename> may be the special string C<\"/dev/null\">.
+F<filename> may be the special string C<\"/dev/null\">.
See L<guestfs(3)/NULL DISKS>.
The optional arguments are:
@@ -1395,7 +1395,7 @@ deprecated C<guestfs_add_drive_with_if> call (q.v.)
=item C<name>
-The name the drive had in the original guest, e.g. C</dev/sdb>.
+The name the drive had in the original guest, e.g. F</dev/sdb>.
This is used as a hint to the guest inspection process if
it is available.
@@ -1403,8 +1403,8 @@ it is available.
Give the disk a label. The label should be a unique, short
string using I<only> ASCII characters C<[a-zA-Z]>.
-As well as its usual name in the API (such as C</dev/sda>),
-the drive will also be named C</dev/disk/guestfs/I<label>>.
+As well as its usual name in the API (such as F</dev/sda>),
+the drive will also be named F</dev/disk/guestfs/I<label>>.
See L<guestfs(3)/DISK LABELS>.
@@ -1419,7 +1419,7 @@ See also: L<guestfs(3)/REMOTE STORAGE>.
=item C<protocol = \"file\">
-C<filename> is interpreted as a local file or device.
+F<filename> is interpreted as a local file or device.
This is the default if the optional protocol parameter
is omitted.
@@ -1504,7 +1504,7 @@ in one of the following formats:
unix:/path/to/socket
If the port number is omitted, then the standard port number
-for the protocol is used (see C</etc/services>).
+for the protocol is used (see F</etc/services>).
=item C<username>
@@ -1601,7 +1601,7 @@ The default is false.
shortdesc = "get Windows systemroot of inspected operating
system";
longdesc = "\
This returns the Windows systemroot of the inspected guest.
-The systemroot is a directory path such as C</WINDOWS>.
+The systemroot is a directory path such as F</WINDOWS>.
This call assumes that the guest is Windows and that the
systemroot could be determined by inspection. If this is not
@@ -2192,7 +2192,7 @@ Please read L<guestfs(3)/INSPECTION> for more
details." };
shortdesc = "get drive letter mappings";
longdesc = "\
This call is useful for Windows which uses a primitive system
-of assigning drive letters (like \"C:\") to partitions.
+of assigning drive letters (like F<C:\\>) to partitions.
This inspection API examines the Windows Registry to find out
how disks/partitions are mapped to drive letters, and returns
a hash table as in the example below:
@@ -2233,7 +2233,7 @@ If it was not possible to get an icon this function
returns a
zero-length (non-NULL) buffer. I<Callers must check for this case>.
Libguestfs will start by looking for a file called
-C</etc/favicon.png> or C<C:\\etc\\favicon.png>
+F</etc/favicon.png> or F<C:\\etc\\favicon.png>
and if it has the correct format, the contents of this file will
be returned. You can disable favicons by passing the
optional C<favicon> boolean as false (default is true).
@@ -2421,19 +2421,19 @@ returns them in a consistent format:
=over 4
-=item C</dev/hdX>
+=item F</dev/hdX>
-=item C</dev/vdX>
+=item F</dev/vdX>
-These are returned as C</dev/sdX>. Note this works for device
+These are returned as F</dev/sdX>. Note this works for device
names and partition names. This is approximately the reverse of
the algorithm described in L<guestfs(3)/BLOCK DEVICE NAMING>.
-=item C</dev/mapper/VG-LV>
+=item F</dev/mapper/VG-LV>
-=item C</dev/dm-N>
+=item F</dev/dm-N>
-Converted to C</dev/VG/LV> form using
C<guestfs_lvm_canonical_lv_name>.
+Converted to F</dev/VG/LV> form using
C<guestfs_lvm_canonical_lv_name>.
=back
@@ -2498,7 +2498,7 @@ or C<guestfs_download> functions." };
shortdesc = "find all files and directories";
longdesc = "\
This command lists out all files and directories, recursively,
-starting at C<directory>. It is essentially equivalent to
+starting at F<directory>. It is essentially equivalent to
running the shell command C<find directory -print> but some
post-processing happens on the output, described below.
@@ -2509,7 +2509,7 @@ if the directory structure was:
/tmp/b
/tmp/c/d
-then the returned list from C<guestfs_find> C</tmp> would be
+then the returned list from C<guestfs_find> F</tmp> would be
4 elements:
a
@@ -2517,7 +2517,7 @@ then the returned list from C<guestfs_find>
C</tmp> would be
c
c/d
-If C<directory> is not a directory, then this command returns
+If F<directory> is not a directory, then this command returns
an error.
The returned list is sorted." };
@@ -2742,7 +2742,7 @@ list a directory contents without making many
round-trips." };
];
shortdesc = "list the files in a directory";
longdesc = "\
-List the files in C<directory> (relative to the root directory,
+List the files in F<directory> (relative to the root directory,
there is no cwd). The '.' and '..' entries are not returned,
but
hidden files are shown." };
@@ -2783,8 +2783,8 @@ data." };
];
shortdesc = "detect the disk format of a disk image";
longdesc = "\
-Detect and return the format of the disk image called C<filename>.
-C<filename> can also be a host device, etc. If the format of the
+Detect and return the format of the disk image called F<filename>.
+F<filename> can also be a host device, etc. If the format of the
image could not be detected, then C<\"unknown\"> is returned.
Note that detecting the disk format can be insecure under some
@@ -2814,7 +2814,7 @@ See also: L<guestfs(3)/DISK IMAGE FORMATS>" };
shortdesc = "return virtual size of a disk";
longdesc = "\
Detect and return the virtual size in bytes of the disk image
-called C<filename>.
+called F<filename>.
Note that detecting disk features can be insecure under some
circumstances. See L<guestfs(3)/CVE-2010-3851>." };
@@ -2840,7 +2840,7 @@ circumstances. See
L<guestfs(3)/CVE-2010-3851>." };
];
shortdesc = "return whether disk has a backing file";
longdesc = "\
-Detect and return whether the disk image C<filename> has a
+Detect and return whether the disk image F<filename> has a
backing file.
Note that detecting disk features can be insecure under some
@@ -3011,7 +3011,7 @@ Set the directory used by the handle to store temporary
files.
The environment variables C<LIBGUESTFS_TMPDIR> and C<TMPDIR>
control the default value: If C<LIBGUESTFS_TMPDIR> is set, then
that is the default. Else if C<TMPDIR> is set, then that is
-the default. Else C</tmp> is the default." };
+the default. Else F</tmp> is the default." };
{ defaults with
name = "get_tmpdir"; added = (1, 19, 58);
@@ -3036,7 +3036,7 @@ effective user ID.
The environment variables C<LIBGUESTFS_CACHEDIR> and C<TMPDIR>
control the default value: If C<LIBGUESTFS_CACHEDIR> is set, then
that is the default. Else if C<TMPDIR> is set, then that is
-the default. Else C</var/tmp> is the default." };
+the default. Else F</var/tmp> is the default." };
{ defaults with
name = "get_cachedir"; added = (1, 19, 58);
@@ -3149,7 +3149,7 @@ the libguestfs protocol." };
test_excuse = "tests in tests/create subdirectory";
shortdesc = "create a blank disk image";
longdesc = "\
-Create a blank disk image called C<filename> (a host file)
+Create a blank disk image called F<filename> (a host file)
with format C<format> (usually C<raw> or C<qcow2>).
The size is C<size> bytes.
@@ -3160,7 +3160,7 @@ size of the backing file, which is discovered
automatically. You
are encouraged to also pass C<backingformat> to describe the format
of C<backingfile>.
-If C<filename> refers to a block device, then the device is
+If F<filename> refers to a block device, then the device is
formatted. The C<size> is ignored since block devices have an
intrinsic size.
@@ -3378,14 +3378,14 @@ let daemon_functions = [
shortdesc = "mount a guest disk at a position in the filesystem";
longdesc = "\
Mount a guest disk at a position in the filesystem. Block devices
-are named C</dev/sda>, C</dev/sdb> and so on, as they were added to
+are named F</dev/sda>, F</dev/sdb> and so on, as they were added to
the guest. If those block devices contain partitions, they will have
-the usual names (eg. C</dev/sda1>). Also LVM C</dev/VG/LV>-style
+the usual names (eg. F</dev/sda1>). Also LVM F</dev/VG/LV>-style
names can be used, or 'mountable' strings returned by
C<guestfs_list_filesystems> or C<guestfs_inspect_get_mountpoints>.
The rules are the same as for L<mount(2)>: A filesystem must
-first be mounted on C</> before others can be mounted. Other
+first be mounted on F</> before others can be mounted. Other
filesystems can only be mounted on directories which already
exist.
@@ -3439,7 +3439,7 @@ file types such as directories, symbolic links, block
special etc." };
test_excuse = "tricky to test because it depends on the exact format
of the 'ls -l' command, which changed between Fedora 10 and Fedora
11";
shortdesc = "list the files in a directory (long format)";
longdesc = "\
-List the files in C<directory> (relative to the root directory,
+List the files in F<directory> (relative to the root directory,
there is no cwd) in the format of 'ls -la'.
This command is mostly useful for interactive sessions. It
@@ -3458,7 +3458,7 @@ is I<not> intended that you try to parse the output
string." };
longdesc = "\
List all the block devices.
-The full block device names are returned, eg. C</dev/sda>.
+The full block device names are returned, eg. F</dev/sda>.
See also C<guestfs_list_filesystems>." };
@@ -3482,7 +3482,7 @@ See also C<guestfs_list_filesystems>." };
longdesc = "\
List all the partitions detected on all block devices.
-The full partition device names are returned, eg. C</dev/sda1>
+The full partition device names are returned, eg. F</dev/sda1>
This does not return logical volumes. For that you will need to
call C<guestfs_lvs>.
@@ -3514,7 +3514,7 @@ List all the physical volumes detected. This is the
equivalent
of the L<pvs(8)> command.
This returns a list of just the device names that contain
-PVs (eg. C</dev/sda2>).
+PVs (eg. F</dev/sda2>).
See also C<guestfs_pvs_full>." };
@@ -3580,7 +3580,7 @@ List all the logical volumes detected. This is the
equivalent
of the L<lvs(8)> command.
This returns a list of the logical volume device names
-(eg. C</dev/VolGroup00/LogVol00>).
+(eg. F</dev/VolGroup00/LogVol00>).
See also C<guestfs_lvs_full>, C<guestfs_list_filesystems>." };
@@ -3635,7 +3635,7 @@ You must call this before using any other
C<guestfs_aug_*>
commands.
C<root> is the filesystem root. C<root> must not be NULL,
-use C</> instead.
+use F</> instead.
The flags are the same as the flags defined in
E<lt>augeas.hE<gt>, the logical I<or> of the following
@@ -3774,7 +3774,7 @@ the tree before or after C<path> (depending on the
boolean
flag C<before>).
C<path> must match exactly one existing node in the tree, and
-C<label> must be a label, ie. not contain C</>, C<*> or end
+C<label> must be a label, ie. not contain F</>, C<*> or end
with a bracketed index C<[N]>." };
{ defaults with
@@ -4056,7 +4056,7 @@ See also C<guestfs_stat>." };
longdesc = "\
This creates an LVM physical volume on the named C<device>,
where C<device> should usually be a partition name such
-as C</dev/sda1>." };
+as F</dev/sda1>." };
{ defaults with
name = "vgcreate"; added = (0, 0, 8);
@@ -4132,7 +4132,7 @@ on the volume group C<volgroup>, with C<size>
megabytes." };
This is a direct interface to the L<sfdisk(8)> program for creating
partitions on block devices.
-C<device> should be a block device, for example C</dev/sda>.
+C<device> should be a block device, for example F</dev/sda>.
C<cyls>, C<heads> and C<sectors> are the number of cylinders,
heads
and sectors on the device, which are passed directly to sfdisk as
@@ -4211,7 +4211,7 @@ contains the filesystem." };
shortdesc = "show mounted filesystems";
longdesc = "\
This returns the list of currently mounted filesystems. It returns
-the list of devices (eg. C</dev/sda1>, C</dev/VG/LV>).
+the list of devices (eg. F</dev/sda1>, F</dev/VG/LV>).
Some internal mounts are not shown.
@@ -4389,7 +4389,7 @@ this function returns an error message. The error message
string is the content of I<stderr> from the command.
The C<$PATH> environment variable will contain at least
-C</usr/bin> and C</bin>. If you require a program from
+F</usr/bin> and F</bin>. If you require a program from
another location, you should provide the full path in the
first parameter.
@@ -4688,10 +4688,10 @@ This uses the L<blockdev(8)> command." };
];
shortdesc = "upload a file from the local machine";
longdesc = "\
-Upload local file C<filename> to C<remotefilename> on the
+Upload local file F<filename> to F<remotefilename> on the
filesystem.
-C<filename> can also be a named pipe.
+F<filename> can also be a named pipe.
See also C<guestfs_download>." };
@@ -4712,10 +4712,10 @@ See also C<guestfs_download>." };
];
shortdesc = "download a file to the local machine";
longdesc = "\
-Download file C<remotefilename> and save it as C<filename>
+Download file F<remotefilename> and save it as F<filename>
on the local machine.
-C<filename> can also be a named pipe.
+F<filename> can also be a named pipe.
See also C<guestfs_upload>, C<guestfs_cat>." };
@@ -4813,7 +4813,7 @@ To get the checksums for many files, use
C<guestfs_checksums_out>." };
];
shortdesc = "unpack tarfile to directory";
longdesc = "\
-This command uploads and unpacks local file C<tarfile> into
C<directory>.
+This command uploads and unpacks local file C<tarfile> into
F<directory>.
The optional C<compress> flag controls compression. If not given,
then the input should be an uncompressed tar file. Otherwise one
@@ -4830,7 +4830,7 @@ compression types)." };
cancellable = true;
shortdesc = "pack directory into tarfile";
longdesc = "\
-This command packs the contents of C<directory> and downloads
+This command packs the contents of F<directory> and downloads
it to local file C<tarfile>.
The optional C<compress> flag controls compression. If not given,
@@ -4871,7 +4871,7 @@ instead of user/group names.
shortdesc = "unpack compressed tarball to directory";
longdesc = "\
This command uploads and unpacks local file C<tarball> (a
-I<gzip compressed> tar file) into C<directory>." };
+I<gzip compressed> tar file) into F<directory>." };
{ defaults with
name = "tgz_out"; added = (1, 0, 3);
@@ -4881,7 +4881,7 @@ I<gzip compressed> tar file) into
C<directory>." };
cancellable = true;
shortdesc = "pack directory into compressed tarball";
longdesc = "\
-This command packs the contents of C<directory> and downloads
+This command packs the contents of F<directory> and downloads
it to local file C<tarball>." };
{ defaults with
@@ -4940,7 +4940,7 @@ C<guestfsd> (the guestfs daemon) that runs inside
the
hypervisor.
There is no comprehensive help for this command. You have
-to look at the file C<daemon/debug.c> in the libguestfs source
+to look at the file F<daemon/debug.c> in the libguestfs source
to find out what you can do." };
{ defaults with
@@ -4980,10 +4980,10 @@ to find out what you can do." };
shortdesc = "remove an LVM logical volume";
longdesc = "\
Remove an LVM logical volume C<device>, where C<device> is
-the path to the LV, such as C</dev/VG/LV>.
+the path to the LV, such as F</dev/VG/LV>.
You can also remove all LVs in a volume group by specifying
-the VG name, C</dev/VG>." };
+the VG name, F</dev/VG>." };
{ defaults with
name = "vgremove"; added = (1, 0, 13);
@@ -5252,14 +5252,14 @@ is advisable.
If grub-install reports the error
\"No suitable drive was found in the generated device map.\"
-it may be that you need to create a C</boot/grub/device.map>
+it may be that you need to create a F</boot/grub/device.map>
file first that contains the mapping between grub device names
and Linux device names. It is usually sufficient to create
a file containing:
(hd0) /dev/vda
-replacing C</dev/vda> with the name of the installation device.
+replacing F</dev/vda> with the name of the installation device.
=back" };
@@ -5405,7 +5405,7 @@ or attached block device(s) in any other way." };
];
shortdesc = "test if two files have equal contents";
longdesc = "\
-This compares the two files C<file1> and C<file2> and returns
+This compares the two files F<file1> and F<file2> and returns
true if their content is exactly equal, or false otherwise.
The external L<cmp(1)> program is used for the comparison." };
@@ -5743,7 +5743,7 @@ L<ntfs-3g.probe(8)> manual page." };
shortdesc = "run a command via the shell";
longdesc = "\
This call runs a command from the guest filesystem via the
-guest's C</bin/sh>.
+guest's F</bin/sh>.
This is like C<guestfs_command>, but passes the command to:
@@ -5809,7 +5809,7 @@ with flags C<GLOB_MARK|GLOB_BRACE>.
See that manual page for more details.
Notice that there is no equivalent command for expanding a device
-name (eg. C</dev/sd*>). Use C<guestfs_list_devices>,
+name (eg. F</dev/sd*>). Use C<guestfs_list_devices>,
C<guestfs_list_partitions> etc functions instead." };
{ defaults with
@@ -6096,7 +6096,7 @@ The result is the estimated size in I<kilobytes>
longdesc = "\
This command lists out files contained in an initrd.
-The files are listed without any initial C</> character. The
+The files are listed without any initial F</> character. The
files are listed in the order they appear (not necessarily
alphabetical). Directory names are listed as separate items.
@@ -6110,7 +6110,7 @@ format (compressed cpio files)." };
proc_nr = Some 129;
shortdesc = "mount a file using the loop device";
longdesc = "\
-This command lets you mount C<file> (a filesystem image
+This command lets you mount F<file> (a filesystem image
in a file) on a mount point. It is entirely equivalent to
the command C<mount -o loop file mountpoint>." };
@@ -6155,7 +6155,7 @@ label and/or UUID of the new swap partition." };
Create a swap partition on C<device> with label C<label>.
Note that you cannot attach a swap label to a block device
-(eg. C</dev/sda>), just to a partition. This appears to be
+(eg. F</dev/sda>), just to a partition. This appears to be
a limitation of the kernel or swap tools." };
{ defaults with
@@ -6394,7 +6394,7 @@ and C<guestfs_part_disk>" };
deprecated_by = Some "file";
shortdesc = "determine file type inside a compressed file";
longdesc = "\
-This command runs C<file> after first decompressing C<path>
+This command runs F<file> after first decompressing C<path>
using C<method>.
C<method> must be one of C<gzip>, C<compress> or
C<bzip2>.
@@ -7110,7 +7110,7 @@ directory are watched, but this does I<not> happen
recursively
Note for non-C or non-Linux callers: the inotify events are
defined by the Linux kernel ABI and are listed in
-C</usr/include/sys/inotify.h>." };
+F</usr/include/sys/inotify.h>." };
{ defaults with
name = "inotify_rm_watch"; added = (1, 0, 66);
@@ -7366,8 +7366,8 @@ See also C<guestfs_ping_daemon>." };
shortdesc = "find all files and directories, returning NUL-separated
list";
longdesc = "\
This command lists out all files and directories, recursively,
-starting at C<directory>, placing the resulting list in the
-external file called C<files>.
+starting at F<directory>, placing the resulting list in the
+external file called F<files>.
This command works the same way as C<guestfs_find> with the
following exceptions:
@@ -7434,7 +7434,7 @@ the underlying filesystem is case-insensitive, the driver
exports the filesystem to Linux as case-sensitive.
One consequence of this is that special directories such
-as C<c:\\windows> may appear as C</WINDOWS> or C</windows>
+as F<C:\\windows> may appear as F</WINDOWS> or F</windows>
(or other things) depending on the precise details of how
they were created. In Windows itself this would not be
a problem.
@@ -8052,7 +8052,7 @@ This command cannot do partial copies
];
shortdesc = "return the size of the file in bytes";
longdesc = "\
-This command returns the size of C<file> in bytes.
+This command returns the size of F<file> in bytes.
To get other stats about a file, use C<guestfs_stat>,
C<guestfs_lstat>,
C<guestfs_is_dir>, C<guestfs_is_file> etc.
@@ -8102,12 +8102,12 @@ Rename a volume group C<volgroup> with the new
name C<newvolgroup>." };
];
shortdesc = "list the contents of a single file in an initrd";
longdesc = "\
-This command unpacks the file C<filename> from the initrd file
-called C<initrdpath>. The filename must be given I<without> the
-initial C</> character.
+This command unpacks the file F<filename> from the initrd file
+called F<initrdpath>. The filename must be given I<without> the
+initial F</> character.
For example, in guestfish you could use the following command
-to examine the boot script (usually called C</init>)
+to examine the boot script (usually called F</init>)
contained in a Linux initrd or initramfs image:
initrd-cat /boot/initrd-<version>.img init
@@ -8221,7 +8221,7 @@ or growing unnecessarily." };
shortdesc = "unpack compressed tarball to directory";
longdesc = "\
This command uploads and unpacks local file C<tarball> (an
-I<xz compressed> tar file) into C<directory>." };
+I<xz compressed> tar file) into F<directory>." };
{ defaults with
name = "txz_out"; added = (1, 3, 2);
@@ -8231,7 +8231,7 @@ I<xz compressed> tar file) into
C<directory>." };
optional = Some "xz"; cancellable = true;
shortdesc = "pack directory into compressed tarball";
longdesc = "\
-This command packs the contents of C<directory> and downloads
+This command packs the contents of F<directory> and downloads
it to local file C<tarball> (as an xz compressed tar archive)." };
{ defaults with
@@ -8391,7 +8391,7 @@ The C<guestfs_debug_upload> command uploads a file
to
the libguestfs appliance.
There is no comprehensive help for this command. You have
-to look at the file C<daemon/debug.c> in the libguestfs source
+to look at the file F<daemon/debug.c> in the libguestfs source
to find out what it is for." };
{ defaults with
@@ -8407,7 +8407,7 @@ to find out what it is for." };
shortdesc = "upload base64-encoded data to file";
longdesc = "\
This command uploads base64-encoded data from C<base64file>
-to C<filename>." };
+to F<filename>." };
{ defaults with
name = "base64_out"; added = (1, 3, 5);
@@ -8416,7 +8416,7 @@ to C<filename>." };
cancellable = true;
shortdesc = "download file and encode as base64";
longdesc = "\
-This command downloads the contents of C<filename>, writing
+This command downloads the contents of F<filename>, writing
it out to local file C<base64file> encoded as base64." };
{ defaults with
@@ -8427,7 +8427,7 @@ it out to local file C<base64file> encoded as
base64." };
shortdesc = "compute MD5, SHAx or CRC checksum of files in a
directory";
longdesc = "\
This command computes the checksums of all regular files in
-C<directory> and then emits a list of those checksums to
+F<directory> and then emits a list of those checksums to
the local output file C<sumsfile>.
This can be used for verifying the integrity of a virtual
@@ -8701,7 +8701,7 @@ C<device> is the encrypted block device or
partition.
The caller must supply one of the keys associated with the
LUKS block device, in the C<key> parameter.
-This creates a new block device called C</dev/mapper/mapname>.
+This creates a new block device called F</dev/mapper/mapname>.
Reads and writes to this block device are decrypted from and
encrypted to the underlying C<device> respectively.
@@ -8732,7 +8732,7 @@ mapping is created." };
This closes a LUKS device that was created earlier by
C<guestfs_luks_open> or C<guestfs_luks_open_ro>. The
C<device> parameter must be the name of the LUKS mapping
-device (ie. C</dev/mapper/mapname>) and I<not> the name
+device (ie. F</dev/mapper/mapname>) and I<not> the name
of the underlying block device." };
{ defaults with
@@ -8868,7 +8868,7 @@ If the optional flag C<followsymlinks> is true, then
a symlink
function to return true.
This call only looks at files within the guest filesystem. Libguestfs
-partitions and block devices (eg. C</dev/sda>) cannot be used as the
+partitions and block devices (eg. F</dev/sda>) cannot be used as the
C<path> parameter of this call.
See also C<guestfs_stat>." };
@@ -8968,15 +8968,15 @@ See also C<guestfs_part_to_partnum>,
C<guestfs_device_index>." };
]);
shortdesc = "upload a file from the local machine with offset";
longdesc = "\
-Upload local file C<filename> to C<remotefilename> on the
+Upload local file F<filename> to F<remotefilename> on the
filesystem.
-C<remotefilename> is overwritten starting at the byte C<offset>
+F<remotefilename> is overwritten starting at the byte C<offset>
specified. The intention is to overwrite parts of existing
files or devices, although if a non-existent file is specified
then it is created with a \"hole\" before C<offset>. The
size of the data written is implicit in the size of the
-source C<filename>.
+source F<filename>.
Note that there is no limit on the amount of data that
can be uploaded with this call, unlike with C<guestfs_pwrite>,
@@ -9005,10 +9005,10 @@ See also C<guestfs_upload>,
C<guestfs_pwrite>." };
]);
shortdesc = "download a file to the local machine with offset and
size";
longdesc = "\
-Download file C<remotefilename> and save it as C<filename>
+Download file F<remotefilename> and save it as F<filename>
on the local machine.
-C<remotefilename> is read for C<size> bytes starting at
C<offset>
+F<remotefilename> is read for C<size> bytes starting at
C<offset>
(this region must be within the file or device).
Note that there is no limit on the amount of data that
@@ -9075,8 +9075,8 @@ See also C<guestfs_pread>." };
shortdesc = "get canonical name of an LV";
longdesc = "\
This converts alternative naming schemes for LVs that you
-might find to the canonical name. For example, C</dev/mapper/VG-LV>
-is converted to C</dev/VG/LV>.
+might find to the canonical name. For example, F</dev/mapper/VG-LV>
+is converted to F</dev/VG/LV>.
This command returns an error if the C<lvname> parameter does
not refer to a logical volume.
@@ -9279,7 +9279,7 @@ parameter." };
longdesc = "\
List all device mapper devices.
-The returned list contains C</dev/mapper/*> devices, eg. ones created
+The returned list contains F</dev/mapper/*> devices, eg. ones created
by a previous call to C<guestfs_luks_open>.
Device mapper devices which correspond to logical volumes are I<not>
@@ -9376,8 +9376,8 @@ See also C<guestfs_write>." };
cancellable = true;
shortdesc = "output compressed file";
longdesc = "\
-This command compresses C<file> and writes it out to the local
-file C<zfile>.
+This command compresses F<file> and writes it out to the local
+file F<zfile>.
The compression program used is controlled by the C<ctype> parameter.
Currently this includes: C<compress>, C<gzip>, C<bzip2>,
C<xz> or C<lzop>.
@@ -9798,7 +9798,7 @@ This option may not be specified at the same time as the
C<correct> option.
proc_nr = Some 305;
shortdesc = "list the files in a directory (long format with SELinux
contexts)";
longdesc = "\
-List the files in C<directory> in the format of 'ls -laZ'.
+List the files in F<directory> in the format of 'ls -laZ'.
This command is mostly useful for interactive sessions. It
is I<not> intended that you try to parse the output string." };
@@ -9941,7 +9941,7 @@ To read the label on a filesystem, call
C<guestfs_vfs_label>." };
];
shortdesc = "zero free space in a filesystem";
longdesc = "\
-Zero the free space in the filesystem mounted on C<directory>.
+Zero the free space in the filesystem mounted on F<directory>.
The filesystem must be mounted read-write.
The filesystem contents are not affected, but any free space
@@ -9970,7 +9970,7 @@ or after calling this, depending on your
requirements." };
];
shortdesc = "create an LVM logical volume in % remaining free
space";
longdesc = "\
-Create an LVM logical volume called C</dev/volgroup/logvol>,
+Create an LVM logical volume called F</dev/volgroup/logvol>,
using approximately C<percent> % of the free space remaining
in the volume group. Most usefully, when C<percent> is C<100>
this will create the largest possible LV." };
@@ -10140,7 +10140,7 @@ To create general filesystems, use
C<guestfs_mkfs>." };
];
shortdesc = "get ext2 file attributes of a file";
longdesc = "\
-This returns the file attributes associated with C<file>.
+This returns the file attributes associated with F<file>.
The attributes are a set of bits associated with each
inode which affect the behaviour of the file. The attributes
@@ -10255,7 +10255,7 @@ Don't confuse these attributes with extended
attributes
shortdesc = "set ext2 file attributes of a file";
longdesc = "\
This sets or clears the file attributes C<attrs>
-associated with the inode C<file>.
+associated with the inode F<file>.
C<attrs> is a string of characters representing
file attributes. See C<guestfs_get_e2attrs> for a list of
@@ -10327,7 +10327,7 @@ See C<guestfs_get_e2generation>." };
longdesc = "\
Create a snapshot of the btrfs subvolume C<source>.
The C<dest> argument is the destination directory and the name
-of the snapshot, in the form C</path/to/dest/name>. By default
+of the snapshot, in the form F</path/to/dest/name>. By default
the newly created snapshot is writable, if the value of optional
parameter C<ro> is true, then a readonly snapshot is created. The
optional parameter C<qgroupid> represents the qgroup which the
@@ -10358,7 +10358,7 @@ Delete the named btrfs subvolume or snapshot." };
shortdesc = "create a btrfs subvolume";
longdesc = "\
Create a btrfs subvolume. The C<dest> argument is the destination
-directory and the name of the subvolume, in the form
C</path/to/dest/name>.
+directory and the name of the subvolume, in the form
F</path/to/dest/name>.
The optional parameter C<qgroupid> represents the qgroup which the newly
created subvolume will be added to." };
@@ -10768,7 +10768,7 @@ command (see L<guestfish(1)/glob>), for example:
longdesc = "\
This specialized command is used to get a listing of
the filenames in the directory C<dir>. The list of filenames
-is written to the local file C<filenames> (on the host).
+is written to the local file F<filenames> (on the host).
In the output file, the filenames are separated by C<\\0> characters.
@@ -10826,7 +10826,7 @@ C<guestfs_xfs_growfs> calls." };
];
shortdesc = "open a Windows Registry hive file";
longdesc = "\
-Open the Windows Registry hive file named C<filename>.
+Open the Windows Registry hive file named F<filename>.
If there was any previous hivex handle associated with this
guestfs session, then it is closed.
@@ -10978,7 +10978,7 @@ See also: C<guestfs_hivex_value_utf8>." };
longdesc = "\
Commit (write) changes to the hive.
-If the optional C<filename> parameter is null, then the changes
+If the optional F<filename> parameter is null, then the changes
are written back to the same hive that was opened. If this is
not null then they are written to the alternate filename given
and the original hive is left untouched.
@@ -11171,12 +11171,12 @@ silently create an ext2 filesystem instead." };
If you add drives using the optional C<label> parameter
of C<guestfs_add_drive_opts>, you can use this call to
map between disk labels, and raw block device and partition
-names (like C</dev/sda> and C</dev/sda1>).
+names (like F</dev/sda> and F</dev/sda1>).
This returns a hashtable, where keys are the disk labels
-(I<without> the C</dev/disk/guestfs> prefix), and the values
+(I<without> the F</dev/disk/guestfs> prefix), and the values
are the full raw block device and partition names
-(eg. C</dev/sda> and C</dev/sda1>)." };
+(eg. F</dev/sda> and F</dev/sda1>)." };
{ defaults with
name = "internal_hot_add_drive"; added = (1, 19, 49);
@@ -11678,7 +11678,7 @@ The optional arguments are:
=over 4
-=item C<directory>
+=item F<directory>
Install SYSLINUX in the named subdirectory, instead of in the
root directory of the FAT filesystem.
@@ -11686,8 +11686,8 @@ root directory of the FAT filesystem.
=back
Additional configuration can be supplied to SYSLINUX by
-placing a file called C<syslinux.cfg> on the FAT filesystem,
-either in the root directory, or under C<directory> if that
+placing a file called F<syslinux.cfg> on the FAT filesystem,
+either in the root directory, or under F<directory> if that
optional argument is being used. For further information
about the contents of this file, see L<syslinux(1)>.
@@ -11700,11 +11700,11 @@ See also C<guestfs_extlinux>." };
optional = Some "extlinux";
shortdesc = "install the SYSLINUX bootloader on an ext2/3/4 or btrfs
filesystem";
longdesc = "\
-Install the SYSLINUX bootloader on the device mounted at C<directory>.
+Install the SYSLINUX bootloader on the device mounted at F<directory>.
Unlike C<guestfs_syslinux> which requires a FAT filesystem, this can
be used on an ext2/3/4 or btrfs filesystem.
-The C<directory> parameter can be either a mountpoint, or a
+The F<directory> parameter can be either a mountpoint, or a
directory within the mountpoint.
You also have to mark the partition as \"active\"
@@ -11715,8 +11715,8 @@ The SYSLINUX package comes with some suitable Master
Boot Records.
See the L<extlinux(1)> man page for further information.
Additional configuration can be supplied to SYSLINUX by
-placing a file called C<extlinux.conf> on the filesystem
-under C<directory>. For further information
+placing a file called F<extlinux.conf> on the filesystem
+under F<directory>. For further information
about the contents of this file, see L<extlinux(1)>.
See also C<guestfs_syslinux>." };
@@ -11791,7 +11791,7 @@ To read the UUID on a filesystem, call
C<guestfs_vfs_uuid>." };
test_excuse = "tests in tests/journal subdirectory";
shortdesc = "open the systemd journal";
longdesc = "\
-Open the systemd journal located in C<directory>. Any previously
+Open the systemd journal located in F<directory>. Any previously
opened journal handle is closed.
The contents of the journal can be read using C<guestfs_journal_next>
@@ -12032,7 +12032,7 @@ read as stale or random data." };
cancellable = true;
shortdesc = "pack directory into cpio file";
longdesc = "\
-This command packs the contents of C<directory> and downloads
+This command packs the contents of F<directory> and downloads
it to local file C<cpiofile>.
The optional C<format> parameter can be used to select the format.
@@ -12627,7 +12627,7 @@ prepared disk image, see L</PREPARED DISK
IMAGES>." };
longdesc = " copy-in local [local ...] /remotedir
C<copy-in> copies local files or directories recursively into the disk
-image, placing them in the directory called C</remotedir> (which must
+image, placing them in the directory called F</remotedir> (which must
exist). This guestfish meta-command turns into a sequence of
L</tar-in> and other commands as necessary.
@@ -12724,7 +12724,7 @@ special value C<*> means all events.
The third and final parameter is the shell script fragment
(or any external command) that is executed when any of the
events in the eventset occurs. It is executed using
-C<$SHELL -c>, or if C<$SHELL> is not set then C</bin/sh -c>.
+C<$SHELL -c>, or if C<$SHELL> is not set then F</bin/sh -c>.
The shell script fragment receives callback parameters as
arguments C<$1>, C<$2> etc. The actual event that was
@@ -12772,7 +12772,7 @@ might do:
which would allow you to edit anywhere within the first megabyte
of the disk.
-To edit the superblock of an ext2 filesystem on C</dev/sda1>, do:
+To edit the superblock of an ext2 filesystem on F</dev/sda1>, do:
hexedit /dev/sda1 0x400 0x400
diff --git a/guestfs-release-notes.pod b/guestfs-release-notes.pod
index 60f5271..3bfdb92 100644
--- a/guestfs-release-notes.pod
+++ b/guestfs-release-notes.pod
@@ -84,7 +84,7 @@ The Java bindings are now compatible with OpenJDK 8 (Pino
Toscano).
Oracle Linux is returned as C<oraclelinux> (Nikos Skalkotos).
-Linux guests which do not have C</etc/fstab> can now be handled
+Linux guests which do not have F</etc/fstab> can now be handled
(Pino Toscano).
Minix is returned as C<minix> (Pino Toscano).
@@ -187,11 +187,11 @@ Several places that used large arrays and structures on
the stack have
been fixed.
There is now a test for booting the appliance repeatedly. Useful for
-finding kernel leaks. See: C<tests/qemu/qemu-boot.c>
+finding kernel leaks. See: F<tests/qemu/qemu-boot.c>
There is a test for testing the speed of various qemu features such as
virtio-serial uploads and block device writes. See:
-C<tests/qemu/qemu-speed-test.c>
+F<tests/qemu/qemu-speed-test.c>
GCC warnings are now enabled for OCaml-C bindings in the OCaml virt
tools.
@@ -203,7 +203,7 @@ shared between all these utilities (thanks Pino Toscano).
The FUSE tests were rewritten in C to ensure finer control over how
system calls are tested.
-The C<update-bugs.sh> script has been fixed so it should no longer
+The F<update-bugs.sh> script has been fixed so it should no longer
create an empty C<BUGS> file if the Bugzilla server is unavailable.
The L<virt-resize(1)> tests now use a stochastic method to ensure much
@@ -612,7 +612,7 @@ Earlier versions of libguestfs are not vulnerable.
When generating random root passwords and random seeds, two bugs were
fixed which are possibly security related. Firstly we no longer read
-excessive bytes from C</dev/urandom> (most of which were just thrown
+excessive bytes from F</dev/urandom> (most of which were just thrown
away). Secondly we changed the code to avoid modulo bias. These
issues were not thought to be exploitable.
(Both changes suggested by Edwin Török)
@@ -742,7 +742,7 @@ done on physical machines.
=item *
The libguestfs appliance does not write an empty string to
-C</proc/sys/kernel/hotplug> when starting up.
+F</proc/sys/kernel/hotplug> when starting up.
Note that you B<must> configure your kernel to have
C<CONFIG_UEVENT_HELPER_PATH=""> otherwise you will get strange
LVM
@@ -906,7 +906,7 @@ L<virt-builder(1)> is a new tool for building virtual
machine images.
It lets you rapidly and securely create guests and customize them.
New L<virt-sysprep(1)> operations:
-Remove files in C</tmp> and C</var/tmp>.
+Remove files in F</tmp> and F</var/tmp>.
Remove RPM database files.
Change root and user passwords.
More log files are removed.
@@ -919,7 +919,7 @@ L<virt-resize(1)> and virt-sysprep can now use URIs to
specify a
remote disk.
Use C<guestfish -N filename=type> to create a named disk image
-(instead of the default C<test1.img> etc).
+(instead of the default F<test1.img> etc).
L<virt-sparsify(1)> now tests if there is enough disk space to
complete the operation, instead of possibly running out of space half
@@ -1383,7 +1383,7 @@ Library code internally uses GCC
C<__attribute__((cleanup))> (if
available) to simplify memory allocation.
Internal header files have been reorganized. See the comments in
-C<src/guestfs-internal*.h>
+F<src/guestfs-internal*.h>
Internal code shared between the library and certain tools is now
located in a static C<libutils> library.
@@ -1399,7 +1399,7 @@ Force use of C<serial-tests> with automake
E<ge> 1.12.
Use of sockets in the library protocol layer is abstracted, allowing
other non-POSIX layers to be added in future (see
-C<src/conn-socket.c>).
+F<src/conn-socket.c>).
C<qemu-img info --output json> is used if available, for more secure
parsing of the output of this command.
@@ -1408,7 +1408,7 @@ Distros can now use C<make INSTALLDIRS=vendor
install> to place Ruby
bindings in vendordir. This eliminates a non-upstream patch carried
by both Fedora and Debian.
-Valgrind log files are now written to
C<tmp/valgrind-I<DATE>-I<PID>.log>
+Valgrind log files are now written to
F<tmp/valgrind-I<DATE>-I<PID>.log>
C<make clean> cleans the local C<tmp/> directory.
@@ -1596,8 +1596,8 @@ You can now hotplug drives (add and remove drives after
launch).
Libguestfs can now handle E<gt> 25 disks, in all APIs, tools and tests.
You can label drives when adding them, then refer to them by label
-(C</dev/disk/guestfs/LABEL>) instead of having to use device names
-(C</dev/sda>).
+(F</dev/disk/guestfs/LABEL>) instead of having to use device names
+(F</dev/sda>).
=head3 new library features
@@ -1744,7 +1744,7 @@ A man page for the daemon (L<guestfsd(8)>) is
included.
=head3 guestfish history file
-The C<$HOME/.guestfish> history file is now created with 0600
+The F<$HOME/.guestfish> history file is now created with 0600
permissions (instead of 0644 before) so it is no longer world
readable.
@@ -1754,7 +1754,7 @@ Old versions of both C<virt-edit> and the
C<guestfish> C<edit> command
created a new file containing the changes but did not set the
permissions, etc of the new file to match the old one. The result
of this was that if you edited a security sensitive file such as
-C</etc/shadow> then it would be left world-readable after the edit.
+F</etc/shadow> then it would be left world-readable after the edit.
This issue was assigned CVE-2012-2690, and is fixed in libguestfs E<ge>
1.16.
@@ -1874,16 +1874,16 @@ Separation of the library code into more files:
=item *
Launch backends are now located in separate files
-eg. C<src/launch-appliance.c>, C<src/launch-libvirt.c>.
+eg. F<src/launch-appliance.c>, C<src/launch-libvirt.c>.
=item *
-Generated action code is now split over several C<src/action*.c>
+Generated action code is now split over several F<src/action*.c>
files, for faster compilation.
=item *
-The huge C<src/guestfs.c> file is now split into smaller logical
+The huge F<src/guestfs.c> file is now split into smaller logical
units.
=back
@@ -1944,7 +1944,7 @@ in the main code that were found by syntax-check have been
fixed
Emacs mode (-*- foo -*-) has been added to generated files.
-Progress bar output is now sent to C</dev/tty> so it doesn't end up
in
+Progress bar output is now sent to F</dev/tty> so it doesn't end up
in
the regular output of the program. virt-resize and virt-sparsify now
suppress progress bars if stdout is not a tty.
diff --git a/inspector/virt-inspector.pod b/inspector/virt-inspector.pod
index 1282608..fa909e9 100644
--- a/inspector/virt-inspector.pod
+++ b/inspector/virt-inspector.pod
@@ -29,7 +29,7 @@ You can also run virt-inspector directly on disk images from a
single
virtual machine. Use C<virt-inspector -a disk.img>. In rare cases a
domain has several block devices, in which case you should list
several I<-a> options one after another, with the first corresponding
-to the guest's C</dev/sda>, the second to the guest's
C</dev/sdb> and
+to the guest's F</dev/sda>, the second to the guest's
F</dev/sdb> and
so on.
You can also run virt-inspector on install disks, live CDs, bootable
@@ -117,7 +117,7 @@ ensure the format is always specified.
=item B<--keys-from-stdin>
Read key or passphrase parameters from stdin. The default is
-to try to read passphrases from the user by opening C</dev/tty>.
+to try to read passphrases from the user by opening F</dev/tty>.
=item B<-v>
@@ -163,7 +163,7 @@ For compatibility the old style is still supported.
=head1 XML FORMAT
The virt-inspector XML is described precisely in a RELAX NG schema
-file C<virt-inspector.rng> which is supplied with libguestfs. This
+file F<virt-inspector.rng> which is supplied with libguestfs. This
section is just an overview.
The top-level element is E<lt>operatingsystemsE<gt>, and it
contains
@@ -384,11 +384,11 @@ that libguestfs supports, and from guestfish.
For a description of the C inspection API, read
L<guestfs(3)/INSPECTION>.
-For example code using the C inspection API, look for C<inspect-vm.c>
+For example code using the C inspection API, look for F<inspect-vm.c>
which ships with libguestfs.
-C<inspect-vm.c> has also been translated into other languages. For
-example, C<inspect_vm.pl> is the Perl translation, and there are other
+F<inspect-vm.c> has also been translated into other languages. For
+example, F<inspect_vm.pl> is the Perl translation, and there are other
translations for OCaml, Python, etc. See
L<guestfs(3)/USING LIBGUESTFS WITH OTHER PROGRAMMING LANGUAGES> for a
list of man pages which contain this example code.
diff --git a/java/examples/guestfs-java.pod b/java/examples/guestfs-java.pod
index 5ea2e84..53276e8 100644
--- a/java/examples/guestfs-java.pod
+++ b/java/examples/guestfs-java.pod
@@ -112,22 +112,22 @@ supplied in three parts:
=over 4
-=item C<libguestfs.jar>
+=item F<libguestfs.jar>
-=item C<libguestfs-I<VERSION>.jar>
+=item F<libguestfs-I<VERSION>.jar>
The pure Java JAR file which contains several classes, the primary one
being C<com.redhat.et.libguestfs.GuestFS>. Upstream, the JAR file
contains a version number in the filename, but some Linux distros may
rename it without the version number.
-=item C<libguestfs_jni.so>
+=item F<libguestfs_jni.so>
The JNI code (written in C). This contains private native functions
that interface between Java code and the regular libguestfs C library.
You should B<not> call these directly.
-=item C<libguestfs.so>
+=item F<libguestfs.so>
The regular libguestfs C library.
diff --git a/make-fs/virt-make-fs.pod b/make-fs/virt-make-fs.pod
index 83425a1..917550d 100644
--- a/make-fs/virt-make-fs.pod
+++ b/make-fs/virt-make-fs.pod
@@ -29,7 +29,7 @@ Basic usage is:
where C<input> is either a directory containing files that you want to
add, or a tar archive (either uncompressed tar or gzip-compressed
-tar); and C<output.img> is a disk image. The input type is detected
+tar); and F<output.img> is a disk image. The input type is detected
automatically. The output disk image defaults to a raw ext2 sparse
image unless you specify extra flags (see L</OPTIONS> below).
diff --git a/p2v/virt-p2v-make-disk.pod b/p2v/virt-p2v-make-disk.pod
index 35bba1a..ac7b812 100644
--- a/p2v/virt-p2v-make-disk.pod
+++ b/p2v/virt-p2v-make-disk.pod
@@ -31,7 +31,7 @@ combinations, do:
=head2 EXAMPLES
-Write a virt-p2v bootable USB key on C</dev/sdX> (and existing content
+Write a virt-p2v bootable USB key on F</dev/sdX> (and existing content
is erased), using Fedora 20 as the base distribution:
virt-p2v-make-disk -o /dev/sdX fedora-20
@@ -43,7 +43,7 @@ Write a virt-p2v bootable virtual disk image, and boot it
under qemu:
-drive file=/var/tmp/p2v.img,if=virtio,index=0 \
-drive file=/var/tmp/guest.img,if=virtio,index=1
-where C</var/tmp/guest.img> would be the disk image of some guest that
+where F</var/tmp/guest.img> would be the disk image of some guest that
you want to convert (for testing only).
=head1 OPTIONS
@@ -81,9 +81,9 @@ C<VIRT_P2V_DATA_DIR> environment variable.
=item C<$datadir/issue>
-=item C<$datadir/launch-virt-p2v.in>
+=item F<$datadir/launch-virt-p2v.in>
-=item C<$datadir/p2v.service>
+=item F<$datadir/p2v.service>
Various data files that are copied into the bootable disk image.
diff --git a/p2v/virt-p2v-make-kickstart.pod b/p2v/virt-p2v-make-kickstart.pod
index 78c60fe..4f1ce1f 100644
--- a/p2v/virt-p2v-make-kickstart.pod
+++ b/p2v/virt-p2v-make-kickstart.pod
@@ -30,7 +30,7 @@ Using virt-p2v-make-kickstart is very simple:
virt-p2v-make-kickstart fedora
will build a kickstart file for Fedora. The kickstart file will be
-called C<p2v.ks> and located in the current directory.
+called F<p2v.ks> and located in the current directory.
The parameters are a list of one or more repositories. Some built-in
repositories are available: C<fedora>, C<rawhide> or C<koji>.
You can
@@ -140,17 +140,17 @@ L<virt-v2v(1)>, including Windows or Red Hat
Enterprise Linux.
=item *
-Unpack the tftpboot directory into C</tmp> (so it appears as
-C</tmp/tftpboot>).
+Unpack the tftpboot directory into F</tmp> (so it appears as
+F</tmp/tftpboot>).
=item *
-Copy C<pxelinux.0> and C<ldlinux.c32> from syslinux (usually from
-C</usr/share/syslinux>) into C</tmp/tftpboot>.
+Copy F<pxelinux.0> and F<ldlinux.c32> from syslinux (usually from
+F</usr/share/syslinux>) into F</tmp/tftpboot>.
=item *
-Adjust the C<APPEND> line in C</tmp/tftpboot/pxelinux.cfg/default>
if
+Adjust the C<APPEND> line in F</tmp/tftpboot/pxelinux.cfg/default>
if
required. See L<virt-p2v(1)/KERNEL COMMAND LINE CONFIGURATION>.
=item *
@@ -185,7 +185,7 @@ Display help.
=item B<--output> OUTPUT
Write kickstart to C<OUTPUT>. If not specified, the default is
-C<p2v.ks> in the current directory.
+F<p2v.ks> in the current directory.
=item B<--proxy> URL
@@ -209,11 +209,11 @@ The L<virt-p2v(1)> binary which is copied into the
kickstart file.
=item C<$datadir/issue>
-=item C<$datadir/launch-virt-p2v.in>
+=item F<$datadir/launch-virt-p2v.in>
-=item C<$datadir/p2v.ks.in>
+=item F<$datadir/p2v.ks.in>
-=item C<$datadir/p2v.service>
+=item F<$datadir/p2v.service>
Various data files that are used to make the kickstart.
diff --git a/p2v/virt-p2v.pod b/p2v/virt-p2v.pod
index 5978078..e37e654 100644
--- a/p2v/virt-p2v.pod
+++ b/p2v/virt-p2v.pod
@@ -152,7 +152,7 @@ The second panel on the left controls the virt-v2v output
options. To
understand these options it is a really good idea to read the
L<virt-v2v(1)> manual page. You can leave the options at the default
to create a guest as a disk image plus libvirt XML file located in
-C</var/tmp> on the conversion host. This is a good idea if you are a
+F</var/tmp> on the conversion host. This is a good idea if you are a
first-time virt-p2v user.
│
@@ -282,7 +282,7 @@ which are booted using PXE.
Where exactly you set command line arguments depends on your PXE
implementation, but for pxelinux you put them in the C<APPEND> field
-in the C<pxelinux.cfg> file. For example:
+in the F<pxelinux.cfg> file. For example:
DEFAULT p2v
TIMEOUT 20
@@ -355,7 +355,7 @@ Use this to enable full debugging of virt-v2v.
If asked to diagnose a problem with virt-p2v, you should add
C<p2v.debug> to the kernel command line, and examine the log file
-which is left in C</tmp> on the conversion server.
+which is left in F</tmp> on the conversion server.
=item B<p2v.disks=sdX,sdY,..>
@@ -400,7 +400,7 @@ Set the output mode. This is the same as the virt-v2v
I<-o> option.
See L<virt-v2v(1)/OPTIONS>.
If not specified, the default is C<local>, and the converted guest is
-written to C</var/tmp>.
+written to F</var/tmp>.
=item B<p2v.oa=sparse|preallocated>
@@ -423,7 +423,7 @@ option. See L<virt-v2v(1)/OPTIONS>.
Set the output storage. This is the same as the virt-v2v I<-os>
option. See L<virt-v2v(1)/OPTIONS>.
-If not specified, the default is C</var/tmp> (on the conversion server).
+If not specified, the default is F</var/tmp> (on the conversion server).
=item B<p2v.pre=COMMAND>
@@ -447,7 +447,7 @@ This can be any command or script. If the command contains
spaces,
you must quote the whole command with double quotes.
I<If> virt-p2v is running as root, I<and> the command line was set
-from C</proc/cmdline> (not I<--cmdline>), then the default is to
run
+from F</proc/cmdline> (not I<--cmdline>), then the default is to
run
the L<poweroff(8)> command. Otherwise the default is not to run any
command.
@@ -485,7 +485,7 @@ Display help.
=item B<--cmdline=CMDLINE>
This is used for debugging. Instead of parsing the kernel command line
-from C</proc/cmdline>, parse the string parameter C<CMDLINE>.
+from F</proc/cmdline>, parse the string parameter C<CMDLINE>.
=item B<-v>
@@ -538,13 +538,13 @@ Into this directory are written various files which
include:
=over 4
-=item C<name>
+=item F<name>
I<before conversion>
The name (usually the hostname) of the physical machine.
-=item C<physical.xml>
+=item F<physical.xml>
I<before conversion>
@@ -556,20 +556,20 @@ Note this is not "real" libvirt XML (and must
B<never> be loaded into
libvirt, which would reject it anyhow). Also it is not the same as
the libvirt XML which virt-v2v generates in certain output modes.
-=item C<status>
+=item F<status>
I<after conversion>
The final status of the conversion. C<0> if the conversion was
successful. Non-zero if the conversion failed.
-=item C<time>
+=item F<time>
I<before conversion>
The start date/time of conversion.
-=item C<virt-v2v-conversion-log.txt>
+=item F<virt-v2v-conversion-log.txt>
I<during/after conversion>
@@ -616,7 +616,7 @@ file.
The final step is to send the S<C<virt-v2v -i libvirtxml physical.xml
...>>
command to the conversion server over the control connection. This
-references the C<physical.xml> file (see above), which in turn
+references the F<physical.xml> file (see above), which in turn
references the NBD listening port(s) of the data connection(s).
Output from the virt-v2v command (messages, debugging etc) is saved
diff --git a/rescue/virt-rescue.pod b/rescue/virt-rescue.pod
index d5c729f..a8bbbd7 100644
--- a/rescue/virt-rescue.pod
+++ b/rescue/virt-rescue.pod
@@ -46,9 +46,9 @@ For live VMs you I<must> use the --ro option.
When you run virt-rescue on a virtual machine or disk image, you are
placed in an interactive bash shell where you can use many ordinary
-Linux commands. What you see in C</> (C</bin>, C</lib> etc)
is the
+Linux commands. What you see in F</> (F</bin>, F</lib> etc)
is the
rescue appliance. You must mount the virtual machine's filesystems by
-hand. There is an empty directory called C</sysroot> where you can
+hand. There is an empty directory called F</sysroot> where you can
mount filesystems.
You can get virt-rescue to suggest mount commands for you by using the
@@ -169,12 +169,12 @@ For example:
virt-rescue --format=raw -a disk.img
-forces raw format (no auto-detection) for C<disk.img>.
+forces raw format (no auto-detection) for F<disk.img>.
virt-rescue --format=raw -a disk.img --format -a another.img
-forces raw format (no auto-detection) for C<disk.img> and reverts to
-auto-detection for C<another.img>.
+forces raw format (no auto-detection) for F<disk.img> and reverts to
+auto-detection for F<another.img>.
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
@@ -304,7 +304,7 @@ QEMU user networking cannot receive incoming connections.
The virt-rescue appliance needs to be small and so does not include
many network tools. In particular there is no L<telnet(1)> command.
You can make TCP connections from the shell using the magical
-C</dev/tcp/E<lt>hostnameE<gt>/E<lt>portE<gt>>
syntax:
+F</dev/tcp/E<lt>hostnameE<gt>/E<lt>portE<gt>>
syntax:
exec 3<>/dev/tcp/redhat.com/80
echo "GET /" >&3
@@ -338,13 +338,13 @@ When starting virt-rescue, attach the core files disk
last:
virt-rescue --rw [-a ...] -a /tmp/corefiles
B<NB.> If you use the I<--ro> option, then virt-rescue will
silently
-not write any core files to C</tmp/corefiles>.
+not write any core files to F</tmp/corefiles>.
=item 3.
Inside virt-rescue, mount the core files disk. Note replace
-C</dev/sdb1> with the last disk index. For example if the core files
-disk is the last of four disks, you would use C</dev/sdd1>.
+F</dev/sdb1> with the last disk index. For example if the core files
+disk is the last of four disks, you would use F</dev/sdd1>.
><rescue> mkdir /tmp/mnt
><rescue> mount /dev/sdb1 /tmp/mnt
@@ -360,7 +360,7 @@ Enable core dumps in the rescue kernel:
=item 5.
Run the tool that caused the core dump. The core dump will be written
-to C</tmp/mnt/core.I<PID>>.
+to F</tmp/mnt/core.I<PID>>.
><rescue> ls -l /tmp/mnt
total 1628
diff --git a/resize/virt-resize.pod b/resize/virt-resize.pod
index d8da02f..a7620e0 100644
--- a/resize/virt-resize.pod
+++ b/resize/virt-resize.pod
@@ -244,11 +244,11 @@ C<dd if=/dev/zero of=outdisk bs=1M count=..>)
=head2 LOGICAL PARTITIONS
-Logical partitions (a.k.a. C</dev/sda5+> on disks using DOS partition
+Logical partitions (a.k.a. F</dev/sda5+> on disks using DOS partition
tables) cannot be resized.
To understand what is going on, firstly one of the four partitions
-C</dev/sda1-4> will have MBR partition type C<05> or C<0f>.
This is
+F</dev/sda1-4> will have MBR partition type C<05> or C<0f>.
This is
called the B<extended partition>. Use L<virt-filesystems(1)> to
see
the MBR partition type.
@@ -260,7 +260,7 @@ copied across, all the logical partitions contained inside
are copied
over implicitly. Virt-resize does not look inside the extended
partition, so it copies the logical partitions blindly.
-You cannot specify a logical partition (C</dev/sda5+>) at all on the
+You cannot specify a logical partition (F</dev/sda5+>) at all on the
command line. Doing so will give an error.
=head1 OPTIONS
@@ -423,8 +423,8 @@ You can give this option multiple times.
This takes the logical volume and, as a final step, expands it to fill
all the space available in its volume group. A typical usage,
-assuming a Linux guest with a single PV C</dev/sda2> and a root device
-called C</dev/vg_guest/lv_root> would be:
+assuming a Linux guest with a single PV F</dev/sda2> and a root device
+called F</dev/vg_guest/lv_root> would be:
virt-resize indisk outdisk \
--expand /dev/sda2 --LV-expand /dev/vg_guest/lv_root
@@ -677,8 +677,8 @@ specify other parameters to grub-install, use
L<virt-rescue(1)>.
=head2 RESIZING WINDOWS BOOT PARTITIONS
In Windows Vista and later versions, Microsoft switched to using a
-separate boot partition. In these VMs, typically C</dev/sda1> is the
-boot partition and C</dev/sda2> is the main (C:) drive. Resizing the
+separate boot partition. In these VMs, typically F</dev/sda1> is the
+boot partition and F</dev/sda2> is the main (C:) drive. Resizing the
first (boot) partition causes the bootloader to fail with
C<0xC0000225> error. Resizing the second partition (ie. C: drive)
should work.
diff --git a/sparsify/virt-sparsify.pod b/sparsify/virt-sparsify.pod
index 9ddedc6..36063ca 100644
--- a/sparsify/virt-sparsify.pod
+++ b/sparsify/virt-sparsify.pod
@@ -211,7 +211,7 @@ zeroed, but existing blocks of zeroes will still be
sparsified.
When using I<--in-place>, the filesystem is ignored completely.
In the second form, this ignores the named volume group. Use the
-volume group name without the C</dev/> prefix, eg. I<--ignore
vg_foo>
+volume group name without the F</dev/> prefix, eg. I<--ignore
vg_foo>
You can give this option multiple times.
@@ -408,9 +408,9 @@ You should ensure there is enough free space in the worst
case for a
full copy of the source disk (I<virtual> size), or else set
C<$TMPDIR>
to point to another directory that has enough space.
-This defaults to C</tmp>.
+This defaults to F</tmp>.
-Note that if C<$TMPDIR> is a tmpfs (eg. if C</tmp> is on tmpfs, or
if
+Note that if C<$TMPDIR> is a tmpfs (eg. if F</tmp> is on tmpfs, or
if
you use C<TMPDIR=/dev/shm>), tmpfs defaults to a maximum size of
I<half> of physical RAM. If virt-sparsify exceeds this, it will hang.
The solution is either to use a real disk, or to increase the maximum
diff --git a/src/guestfs.pod b/src/guestfs.pod
index e2ee1b5..0068183 100644
--- a/src/guestfs.pod
+++ b/src/guestfs.pod
@@ -140,8 +140,8 @@ cause disk corruption, but adding it read-only is safe.
You should usually add at least one disk image, and you may add
multiple disk images. If adding multiple disk images, they usually
have to be "related", ie. from the same guest. In the API, the disk
-images are usually referred to as C</dev/sda> (for the first one you
-added), C</dev/sdb> (for the second one you added), etc.
+images are usually referred to as F</dev/sda> (for the first one you
+added), F</dev/sdb> (for the second one you added), etc.
Once L</guestfs_launch> has been called you cannot add any more images.
You can call L</guestfs_list_devices> to get a list of the device
@@ -162,10 +162,10 @@ directly:
guestfs_mount (g, "/dev/sda1", "/");
-where C</dev/sda1> means literally the first partition (C<1>) of
the
-first disk image that we added (C</dev/sda>). If the disk contains
+where F</dev/sda1> means literally the first partition (C<1>) of
the
+first disk image that we added (F</dev/sda>). If the disk contains
Linux LVM2 logical volumes you could refer to those instead
-(eg. C</dev/VG/LV>). Note that these are libguestfs virtual devices,
+(eg. F</dev/VG/LV>). Note that these are libguestfs virtual devices,
and are nothing to do with host devices.
If you are given a disk image and you don't know what it contains then
@@ -328,8 +328,8 @@ Example: duplicate the contents of an LV:
/* -1 marks the end of the list of optional parameters */
-1);
-The destination (C</dev/VG/Copy>) must be at least as large as the
-source (C</dev/VG/Original>). To copy less than the whole source
+The destination (F</dev/VG/Copy>) must be at least as large as the
+source (F</dev/VG/Original>). To copy less than the whole source
device, use the optional C<size> parameter:
guestfs_copy_device_to_device (g,
@@ -353,7 +353,7 @@ Calls like L</guestfs_upload>,
L</guestfs_download>,
L</guestfs_tar_in>, L</guestfs_tar_out> etc appear to only take
filenames as arguments, so it appears you can only upload and download
to files. However many Un*x-like hosts let you use the special device
-files C</dev/stdin>, C</dev/stdout>, C</dev/stderr> and
C</dev/fd/N>
+files F</dev/stdin>, F</dev/stdout>, F</dev/stderr> and
F</dev/fd/N>
to read and write from stdin, stdout, stderr, and arbitrary file
descriptor N.
@@ -575,7 +575,7 @@ Then open these devices by calling
L</guestfs_luks_open>.
Obviously you will require the passphrase!
Opening a LUKS device creates a new device mapper device
-called C</dev/mapper/mapname> (where C<mapname> is the
+called F</dev/mapper/mapname> (where C<mapname> is the
string you supply to L</guestfs_luks_open>).
Reads and writes to this mapper device are decrypted from and
encrypted to the underlying block device respectively.
@@ -588,7 +588,7 @@ Use the reverse process to close a LUKS device. Unmount
any logical volumes on it, deactivate the volume groups
by caling C<guestfs_vg_activate (g, 0, ["/dev/VG"])>.
Then close the mapper device by calling
-L</guestfs_luks_close> on the C</dev/mapper/mapname>
+L</guestfs_luks_close> on the F</dev/mapper/mapname>
device (I<not> the underlying encrypted block device).
=head2 MOUNT LOCAL
@@ -882,7 +882,7 @@ respectively.
Un*x-like and Linux-based operating systems usually consist of several
filesystems which are mounted at boot time (for example, a separate
-boot partition mounted on C</boot>). The inspection rules are able to
+boot partition mounted on F</boot>). The inspection rules are able to
detect how filesystems correspond to mount points. Call
C<guestfs_inspect_get_mountpoints> to get this mapping. It might
return a hash table like this example:
@@ -894,8 +894,8 @@ return a hash table like this example:
The caller can then make calls to L</guestfs_mount> to
mount the filesystems as suggested.
-Be careful to mount filesystems in the right order (eg. C</> before
-C</usr>). Sorting the keys of the hash by length, shortest first,
+Be careful to mount filesystems in the right order (eg. F</> before
+F</usr>). Sorting the keys of the hash by length, shortest first,
should work.
Inspection currently only works for some common operating systems.
@@ -945,7 +945,7 @@ DOS and Windows still use drive letters, and the filesystems
are
always treated as case insensitive by Windows itself, and therefore
you might find a Windows configuration file referring to a path like
C<c:\windows\system32>. When the filesystem is mounted in libguestfs,
-that directory might be referred to as C</WINDOWS/System32>.
+that directory might be referred to as F</WINDOWS/System32>.
Drive letter mappings can be found using inspection
(see L</INSPECTION> and L</guestfs_inspect_get_drive_mappings>)
@@ -1113,7 +1113,7 @@ used.
=item B<C#>
The C# bindings are highly experimental. Please read the warnings
-at the top of C<csharp/Libguestfs.cs>.
+at the top of F<csharp/Libguestfs.cs>.
=item B<Erlang>
@@ -1238,8 +1238,8 @@ L</guestfs_add_drive_ro> to guarantee that the disk
is not changed.
=item guestfish command line is hard to use.
-C<guestfish disk.img> doesn't do what people expect (open
C<disk.img>
-for examination). It tries to run a guestfish command C<disk.img>
+F<guestfish disk.img> doesn't do what people expect (open
F<disk.img>
+for examination). It tries to run a guestfish command F<disk.img>
which doesn't exist, so it fails. In earlier versions of guestfish
the error message was also unintuitive, but we have corrected this
since. Like the Bourne shell, we should have used C<guestfish -c
@@ -1269,15 +1269,15 @@ and return values which take bytes or other units.
=item Ambiguity between devices and paths
There is a subtle ambiguity in the API between a device name
-(eg. C</dev/sdb2>) and a similar pathname. A file might just happen
-to be called C<sdb2> in the directory C</dev> (consider some
non-Unix
+(eg. F</dev/sdb2>) and a similar pathname. A file might just happen
+to be called C<sdb2> in the directory F</dev> (consider some
non-Unix
VM image).
In the current API we usually resolve this ambiguity by having two
separate calls, for example L</guestfs_checksum> and
L</guestfs_checksum_device>. Some API calls are ambiguous and
(incorrectly) resolve the problem by detecting if the path supplied
-begins with C</dev/>.
+begins with F</dev/>.
To avoid both the ambiguity and the need to duplicate some calls, we
could make paths/devices into structured names. One way to do this
@@ -1334,14 +1334,14 @@ Libguestfs needs a supermin appliance, which it finds by
looking along
an internal path.
By default it looks for these in the directory C<$libdir/guestfs>
-(eg. C</usr/local/lib/guestfs> or C</usr/lib64/guestfs>).
+(eg. F</usr/local/lib/guestfs> or F</usr/lib64/guestfs>).
Use L</guestfs_set_path> or set the environment variable
L</LIBGUESTFS_PATH> to change the directories that libguestfs will
search in. The value is a colon-separated list of paths. The current
directory is I<not> searched unless the path contains an empty element
or C<.>. For example C<LIBGUESTFS_PATH=:/usr/lib/guestfs> would
-search the current directory and then C</usr/lib/guestfs>.
+search the current directory and then F</usr/lib/guestfs>.
=head2 QEMU WRAPPERS
@@ -1361,7 +1361,7 @@ qemu from source:
qemudir=/home/rjones/d/qemu
exec $qemudir/x86_64-softmmu/qemu-system-x86_64 -L $qemudir/pc-bios
"$@"
-Save this script as C</tmp/qemu.wrapper> (or wherever), C<chmod
+x>,
+Save this script as F</tmp/qemu.wrapper> (or wherever), C<chmod
+x>,
and then use it by setting the LIBGUESTFS_HV environment variable.
For example:
@@ -1576,7 +1576,7 @@ looking for a virtio-serial channel to connect to:
</devices>
</domain>
-L</guestfs_add_domain> extracts C</path/to/socket> and sets the
+L</guestfs_add_domain> extracts F</path/to/socket> and sets the
backend to C<unix:/path/to/socket>.
Some of the libguestfs tools (including guestfish) support a I<--live>
@@ -1678,13 +1678,13 @@ developer to program in confidence against the
libguestfs API.
In the kernel there is now quite a profusion of schemata for naming
block devices (in this context, by I<block device> I mean a physical
or virtual hard drive). The original Linux IDE driver used names
-starting with C</dev/hd*>. SCSI devices have historically used a
-different naming scheme, C</dev/sd*>. When the Linux kernel
I<libata>
+starting with F</dev/hd*>. SCSI devices have historically used a
+different naming scheme, F</dev/sd*>. When the Linux kernel
I<libata>
driver became a popular replacement for the old IDE driver
(particularly for SATA devices) those devices also used the
-C</dev/sd*> scheme. Additionally we now have virtual machines with
+F</dev/sd*> scheme. Additionally we now have virtual machines with
paravirtualized drivers. This has created several different naming
-systems, such as C</dev/vd*> for virtio disks and C</dev/xvd*> for
Xen
+systems, such as F</dev/vd*> for virtio disks and F</dev/xvd*> for
Xen
PV disks.
As discussed above, libguestfs uses a qemu appliance running an
@@ -1696,11 +1696,11 @@ or partition names. Working scripts and the recipe
(example) scripts
that we make available over the internet could fail if the naming
scheme changes.
-Therefore libguestfs defines C</dev/sd*> as the I<standard naming
-scheme>. Internally C</dev/sd*> names are translated, if necessary,
+Therefore libguestfs defines F</dev/sd*> as the I<standard naming
+scheme>. Internally F</dev/sd*> names are translated, if necessary,
to other names as required. For example, under RHEL 5 which uses the
-C</dev/hd*> scheme, any device parameter C</dev/sda2> is translated
to
-C</dev/hda2> transparently.
+F</dev/hd*> scheme, any device parameter F</dev/sda2> is translated
to
+F</dev/hda2> transparently.
Note that this I<only> applies to parameters. The
L</guestfs_list_devices>, L</guestfs_list_partitions> and similar
calls
@@ -1718,9 +1718,9 @@ Not all versions of libguestfs support setting a disk
label, and when
it is supported, it is limited to 20 ASCII characters C<[a-zA-Z]>.
When you add a disk with a label, it can either be addressed
-using C</dev/sd*>, or using C</dev/disk/guestfs/I<label>>.
+using F</dev/sd*>, or using F</dev/disk/guestfs/I<label>>.
Partitions on the disk can be addressed using
-C</dev/disk/guestfs/I<label>I<partnum>>.
+F</dev/disk/guestfs/I<label>I<partnum>>.
Listing devices (L</guestfs_list_devices>) and partitions
(L</guestfs_list_partitions>) returns the raw block device name.
@@ -1732,8 +1732,8 @@ to raw block device and partition names.
Usually this translation is transparent. However in some (very rare)
cases you may need to know the exact algorithm. Such cases include
where you use L</guestfs_config> to add a mixture of virtio and IDE
-devices to the qemu-based appliance, so have a mixture of C</dev/sd*>
-and C</dev/vd*> devices.
+devices to the qemu-based appliance, so have a mixture of F</dev/sd*>
+and F</dev/vd*> devices.
The algorithm is applied only to I<parameters> which are known to be
either device or partition names. Return values from functions such
@@ -1747,7 +1747,7 @@ Is the string a parameter which is a device or partition
name?
=item *
-Does the string begin with C</dev/sd>?
+Does the string begin with F</dev/sd>?
=item *
@@ -1756,15 +1756,15 @@ However if I<not> then we continue with this
algorithm.
=item *
-Replace initial C</dev/sd> string with C</dev/hd>.
+Replace initial F</dev/sd> string with F</dev/hd>.
-For example, change C</dev/sda2> to C</dev/hda2>.
+For example, change F</dev/sda2> to F</dev/hda2>.
If that named device exists, use it. If not, continue.
=item *
-Replace initial C</dev/sd> string with C</dev/vd>.
+Replace initial F</dev/sd> string with F</dev/vd>.
If that named device exists, use it. If not, return an error.
@@ -1905,7 +1905,7 @@ Modern qemu (hence libguestfs) supports most variations,
but you
should be aware that older versions of qemu had some very bad
data-corrupting bugs in this area.
-Note that VMware ESX exposes files with the name C<guest-flat.vmdk>.
+Note that VMware ESX exposes files with the name F<guest-flat.vmdk>.
These are not VMDK. They are raw format files which happen to have a
C<.vmdk> extension.
@@ -2050,7 +2050,7 @@ Guest configuration may be altered in unusual ways by the
administrator of the virtual machine, and may not reflect reality
(particularly for untrusted or actively malicious guests). For
example we parse the hostname from configuration files like
-C</etc/sysconfig/network> that we find in the guest, but the guest
+F</etc/sysconfig/network> that we find in the guest, but the guest
administrator can easily manipulate these files to provide the wrong
hostname.
@@ -2140,7 +2140,7 @@ Old versions of both virt-edit and the guestfish
C<edit> command
created a new file containing the changes but did not set the
permissions, etc of the new file to match the old one. The result of
this was that if you edited a security sensitive file such as
-C</etc/shadow> then it would be left world-readable after the edit.
+F</etc/shadow> then it would be left world-readable after the edit.
It is sufficient to update libguestfs to any version E<ge> 1.16.
@@ -2161,11 +2161,11 @@ L<https://bugzilla.redhat.com/1016960>
When using the L<guestfish(1)> I<--remote> or guestfish
I<--listen>
options, guestfish would create a socket in a known location
-(C</tmp/.guestfish-$UID/socket-$PID>).
+(F</tmp/.guestfish-$UID/socket-$PID>).
The location has to be a known one in order for both ends to
communicate. However no checking was done that the containing
-directory (C</tmp/.guestfish-$UID>) is owned by the user. Thus
+directory (F</tmp/.guestfish-$UID>) is owned by the user. Thus
another user could create this directory and potentially hijack
sockets owned by another user's guestfish client or server.
@@ -3056,7 +3056,7 @@ the moment this is only used for progress messages.
=head2 EXAMPLE: CAPTURING LOG MESSAGES
A working program demonstrating this can be found in
-C<examples/debug-logging.c> in the source of libguestfs.
+F<examples/debug-logging.c> in the source of libguestfs.
One motivation for the generic event API was to allow GUI programs to
capture debug and other messages. In libguestfs E<le> 1.8 these were
@@ -3137,7 +3137,7 @@
L</guestfs_get_libvirt_requested_credential_defresult>.
The example program below should make this clearer.
There is also a more substantial working example program supplied with
-the libguestfs sources, called C<libvirt-auth.c>.
+the libguestfs sources, called F<libvirt-auth.c>.
main ()
{
@@ -3415,7 +3415,7 @@ and some ordinary C entry points:
printf ("\t%s %s\n", probefunc(), $$parms);
}
-The script above can be saved to C<test.stap> and run using the
+The script above can be saved to F<test.stap> and run using the
L<stap(1)> program. Note that you either have to be root, or you have
to add yourself to several special stap groups. Consult the systemtap
documentation for more information.
@@ -3558,7 +3558,7 @@ debugging (set the environment variable
C<LIBGUESTFS_DEBUG=1>).
C<supermin --build> is invoked to create the kernel, a small initrd
and the appliance.
-The appliance is cached in C</var/tmp/.guestfs-E<lt>UIDE<gt>>
(or in
+The appliance is cached in F</var/tmp/.guestfs-E<lt>UIDE<gt>>
(or in
another directory if C<LIBGUESTFS_CACHEDIR> or C<TMPDIR> are set).
For a complete description of how the appliance is created and cached,
@@ -3575,7 +3575,7 @@ appliance. The purpose of the initrd is to load enough
kernel modules
in order that the appliance itself can be mounted and started.
The initrd is a cpio archive called
-C</var/tmp/.guestfs-E<lt>UIDE<gt>/appliance.d/initrd>.
+F</var/tmp/.guestfs-E<lt>UIDE<gt>/appliance.d/initrd>.
When the initrd has started you will see messages showing that kernel
modules are being loaded, similar to this:
@@ -3590,16 +3590,16 @@ modules are being loaded, similar to this:
The appliance is a sparse file containing an ext2 filesystem which
contains a familiar (although reduced in size) Linux operating system.
It would normally be called
-C</var/tmp/.guestfs-E<lt>UIDE<gt>/appliance.d/root>.
+F</var/tmp/.guestfs-E<lt>UIDE<gt>/appliance.d/root>.
The regular disks being inspected by libguestfs are the first
-devices exposed by qemu (eg. as C</dev/vda>).
+devices exposed by qemu (eg. as F</dev/vda>).
-The last disk added to qemu is the appliance itself (eg. C</dev/vdb>
+The last disk added to qemu is the appliance itself (eg. F</dev/vdb>
if there was only one regular disk).
Thus the final job of the initrd is to locate the appliance disk,
-mount it, and switch root into the appliance, and run C</init> from
+mount it, and switch root into the appliance, and run F</init> from
the appliance.
If this works successfully you will see messages such as:
@@ -3644,7 +3644,7 @@ The protocol used to talk between the library and the
daemon running
inside the qemu virtual machine is a simple RPC mechanism built on top
of XDR (RFC 1014, RFC 1832, RFC 4506).
-The detailed format of structures is in C<src/guestfs_protocol.x>
+The detailed format of structures is in F<src/guestfs_protocol.x>
(note: this file is automatically generated).
There are two broad cases, ordinary functions that don't have any
@@ -3874,10 +3874,10 @@ run the generator (C<./autogen.sh && make -C
generator>) in order to
create those files.
Libguestfs uses an autotools-based build system, with the main files
-being C<configure.ac> and C<Makefile.am>. The C<generator>
+being F<configure.ac> and F<Makefile.am>. The F<generator>
subdirectory contains the generator, plus files describing the API.
-The C<src> subdirectory contains source for the library. The
-C<appliance> and C<daemon> subdirectories contain the source for
the
+The F<src> subdirectory contains source for the library. The
+F<appliance> and F<daemon> subdirectories contain the source for
the
code that builds the appliance, and the code that runs in the
appliance respectively. Other directories are covered in the section
L<SOURCE CODE SUBDIRECTORIES> below.
@@ -3886,20 +3886,20 @@ Apart from the fact that all API entry points go via
some generated
code, the library is straightforward. (In fact, even the generated
code is designed to be readable, and should be read as ordinary code).
Some actions run entirely in the library, and are written as C
-functions in files under C<src>. Others are forwarded to the daemon
+functions in files under F<src>. Others are forwarded to the daemon
where (after some generated RPC marshalling) they appear as C
-functions in files under C<daemon>.
+functions in files under F<daemon>.
To build from source, first read the C<README> file.
-=head2 C<local*> FILES
+=head2 F<local*> FILES
-Files in the top source directory that begin with the prefix C<local*>
+Files in the top source directory that begin with the prefix F<local*>
are ignored by git. These files can contain local configuration or
scripts that you need to build libguestfs.
-By convention, I have a file called C<localconfigure> which is a
-simple wrapper around C<autogen.sh> containing local configure
+By convention, I have a file called F<localconfigure> which is a
+simple wrapper around F<autogen.sh> containing local configure
customizations that I need:
. localenv
@@ -3914,7 +3914,7 @@ So I can use this to build libguestfs:
./localconfigure && make
-If there is a file in the top build directory called C<localenv>, then
+If there is a file in the top build directory called F<localenv>, then
it will be sourced by C<make>. This file can contain any local
environment variables needed, eg. for skipping tests:
@@ -3923,9 +3923,9 @@ environment variables needed, eg. for skipping tests:
# Skip this test, it is broken.
export SKIP_TEST_BTRFS_FSCK=1
-Note that C<localenv> is included by the top Makefile (so it's a
+Note that F<localenv> is included by the top Makefile (so it's a
Makefile fragment). But if it is also sourced by your
-C<localconfigure> script then it is used as a shell script.
+F<localconfigure> script then it is used as a shell script.
=head2 ADDING A NEW API ACTION
@@ -3939,7 +3939,7 @@ To add a new API action there are two changes:
=item 1.
You need to add a description of the call (name, parameters, return
-type, tests, documentation) to C<generator/actions.ml>.
+type, tests, documentation) to F<generator/actions.ml>.
There are two sorts of API action, depending on whether the call goes
through to the daemon in the appliance, or is serviced entirely by the
@@ -3985,33 +3985,33 @@ the OCaml description.
You can supply zero or as many tests as you want per API call. The
tests can either be added as part of the API description
-(C<generator/actions.ml>), or in some rarer cases you may want to drop
+(F<generator/actions.ml>), or in some rarer cases you may want to drop
a script into C<tests/*/>. Note that adding a script to
C<tests/*/>
is slower, so if possible use the first method.
The following describes the test environment used when you add an API
-test in C<actions.ml>.
+test in F<actions.ml>.
The test environment has 4 block devices:
=over 4
-=item C</dev/sda> 500MB
+=item F</dev/sda> 500MB
General block device for testing.
-=item C</dev/sdb> 500MB
+=item F</dev/sdb> 500MB
-C</dev/sdb1> is an ext2 filesystem used for testing
+F</dev/sdb1> is an ext2 filesystem used for testing
filesystem write operations.
-=item C</dev/sdc> 10MB
+=item F</dev/sdc> 10MB
Used in a few tests where two block devices are needed.
-=item C</dev/sdd>
+=item F</dev/sdd>
-ISO with fixed content (see C<images/test.iso>).
+ISO with fixed content (see F<images/test.iso>).
=back
@@ -4020,9 +4020,9 @@ libguestfs appliance and block devices are reused between
tests. So
don't try testing L</guestfs_kill_subprocess> :-x
Each test starts with an initial scenario, selected using one of the
-C<Init*> expressions, described in C<generator/types.ml>. These
+C<Init*> expressions, described in F<generator/types.ml>. These
initialize the disks mentioned above in a particular way as documented
-in C<types.ml>. You should not assume anything about the previous
+in F<types.ml>. You should not assume anything about the previous
contents of other disks that are not initialized.
You can add a prerequisite clause to any individual test. This is a
@@ -4048,7 +4048,7 @@ Packagers can run only certain tests by setting for
example:
TEST_ONLY="vfs_type zerofree"
-See C<tests/c-api/tests.c> for more details of how these environment
+See F<tests/c-api/tests.c> for more details of how these environment
variables work.
=head2 DEBUGGING NEW API ACTIONS
@@ -4064,11 +4064,11 @@ stderr, and they will show up if you use C<guestfish
-v>.
=head2 ADDING A NEW LANGUAGE BINDING
All language bindings must be generated by the generator
-(see the C<generator> subdirectory).
+(see the F<generator> subdirectory).
There is no documentation for this yet. We suggest you look
-at an existing binding, eg. C<generator/ocaml.ml> or
-C<generator/perl.ml>.
+at an existing binding, eg. F<generator/ocaml.ml> or
+F<generator/perl.ml>.
=head2 ADDING TESTS FOR LANGUAGE BINDINGS
@@ -4162,7 +4162,7 @@ the automake documentation for details.
Runs a subset of the test suite under valgrind.
-Any C<Makefile.am> in the tree that has a C<check-valgrind:> target
+Any F<Makefile.am> in the tree that has a C<check-valgrind:> target
will be run by this rule.
=item C<make check-valgrind-local-guests>
@@ -4199,7 +4199,7 @@ As above, you have to set C<LIBGUESTFS_HV> to point
to the kernel.
=item C<make check-with-upstream-qemu>
Runs all tests using a local qemu binary. It looks for the qemu
-binary in QEMUDIR (defaults to C<$HOME/d/qemu>), but you can set this
+binary in QEMUDIR (defaults to F<$HOME/d/qemu>), but you can set this
to another directory on the command line, eg:
make check-with-upstream-qemu QEMUDIR=/usr/src/qemu
@@ -4210,7 +4210,7 @@ Runs all tests using a local libvirt. This only has any
effect if the
libvirt backend was selected using
C<./configure --with-default-backend=libvirt>
-It looks for libvirt in LIBVIRTDIR (defaults to C<$HOME/d/libvirt>),
+It looks for libvirt in LIBVIRTDIR (defaults to F<$HOME/d/libvirt>),
but you can set this to another directory on the command line, eg:
make check-with-upstream-libvirt LIBVIRTDIR=/usr/src/libvirt
@@ -4219,7 +4219,7 @@ but you can set this to another directory on the command
line, eg:
Runs some slow/long-running tests which are not run by default.
-Any C<Makefile.am> in the tree that has a C<check-slow:> target
will
+Any F<Makefile.am> in the tree that has a C<check-slow:> target
will
be run by this rule.
=item C<make check-all>
@@ -4311,191 +4311,191 @@ the programmers.
=over 4
-=item C<align>
+=item F<align>
L<virt-alignment-scan(1)> command and documentation.
-=item C<appliance>
+=item F<appliance>
The libguestfs appliance, build scripts and so on.
-=item C<bash>
+=item F<bash>
Bash tab-completion scripts.
-=item C<build-aux>
+=item F<build-aux>
Various build scripts used by autotools.
-=item C<builder>
+=item F<builder>
L<virt-builder(1)> command and documentation.
-=item C<cat>
+=item F<cat>
The L<virt-cat(1)>, L<virt-filesystems(1)>, L<virt-log(1)>
and L<virt-ls(1)> commands and documentation.
-=item C<contrib>
+=item F<contrib>
Outside contributions, experimental parts.
-=item C<customize>
+=item F<customize>
L<virt-customize(1)> command and documentation.
-=item C<daemon>
+=item F<daemon>
The daemon that runs inside the libguestfs appliance and carries out
actions.
-=item C<df>
+=item F<df>
L<virt-df(1)> command and documentation.
-=item C<diff>
+=item F<diff>
L<virt-diff(1)> command and documentation.
-=item C<edit>
+=item F<edit>
L<virt-edit(1)> command and documentation.
-=item C<examples>
+=item F<examples>
C API example code.
-=item C<fish>
+=item F<fish>
L<guestfish(1)>, the command-line shell, and various shell scripts
built on top such as L<virt-copy-in(1)>, L<virt-copy-out(1)>,
L<virt-tar-in(1)>, L<virt-tar-out(1)>.
-=item C<format>
+=item F<format>
L<virt-format(1)> command and documentation.
-=item C<fuse>
+=item F<fuse>
L<guestmount(1)>, FUSE (userspace filesystem) built on top of libguestfs.
-=item C<generator>
+=item F<generator>
The crucially important generator, used to automatically generate
large amounts of boilerplate C code for things like RPC and bindings.
-=item C<gnulib>
+=item F<gnulib>
Gnulib is used as a portability library. A copy of gnulib is included
under here.
-=item C<html>
+=item F<html>
Generated HTML manual pages.
-=item C<inspector>
+=item F<inspector>
L<virt-inspector(1)>, the virtual machine image inspector.
-=item C<logo>
+=item F<logo>
Logo used on the website. The fish is called Arthur by the way.
-=item C<m4>
+=item F<m4>
M4 macros used by autoconf.
-=item C<make-fs>
+=item F<make-fs>
L<virt-make-fs(1)> command and documentation.
-=item C<mllib>
+=item F<mllib>
Various libraries and common code used by L<virt-resize(1)> and
the other tools which are written in OCaml.
-=item C<p2v>
+=item F<p2v>
L<virt-p2v(1)> command, documentation and scripts for building the
virt-p2v ISO or disk image.
-=item C<po>
+=item F<po>
Translations of simple gettext strings.
-=item C<po-docs>
+=item F<po-docs>
The build infrastructure and PO files for translations of manpages and
-POD files. Eventually this will be combined with the C<po> directory,
+POD files. Eventually this will be combined with the F<po> directory,
but that is rather complicated.
-=item C<rescue>
+=item F<rescue>
L<virt-rescue(1)> command and documentation.
-=item C<resize>
+=item F<resize>
L<virt-resize(1)> command and documentation.
-=item C<sparsify>
+=item F<sparsify>
L<virt-sparsify(1)> command and documentation.
-=item C<src>
+=item F<src>
Source code to the C library.
-=item C<sysprep>
+=item F<sysprep>
L<virt-sysprep(1)> command and documentation.
-=item C<tests>
+=item F<tests>
Tests.
-=item C<test-tool>
+=item F<test-tool>
Test tool for end users to test if their qemu/kernel combination
will work with libguestfs.
-=item C<tmp>
+=item F<tmp>
-Used for temporary files when running the tests (instead of C</tmp>
+Used for temporary files when running the tests (instead of F</tmp>
etc). The reason is so that you can run multiple parallel tests of
libguestfs without having one set of tests overwriting the appliance
created by another.
-=item C<tools>
+=item F<tools>
Command line tools written in Perl (L<virt-win-reg(1)> and many others).
-=item C<v2v>
+=item F<v2v>
L<virt-v2v(1)> command and documentation.
-=item C<csharp>
+=item F<csharp>
-=item C<erlang>
+=item F<erlang>
-=item C<gobject>
+=item F<gobject>
-=item C<golang>
+=item F<golang>
-=item C<haskell>
+=item F<haskell>
-=item C<java>
+=item F<java>
-=item C<lua>
+=item F<lua>
-=item C<ocaml>
+=item F<ocaml>
-=item C<php>
+=item F<php>
-=item C<perl>
+=item F<perl>
-=item C<python>
+=item F<python>
-=item C<ruby>
+=item F<ruby>
Language bindings.
@@ -4516,7 +4516,7 @@ Ubuntu.
=item *
-Finalize C<guestfs-release-notes.pod>
+Finalize F<guestfs-release-notes.pod>
=item *
@@ -4530,7 +4530,7 @@ to push the latest POT files to Zanata. Then run:
./zanata-pull.sh
-which is a wrapper to pull the latest translated C<*.po> files.
+which is a wrapper to pull the latest translated F<*.po> files.
=item *
@@ -4543,7 +4543,7 @@ L<http://libguestfs.org/download>.
=item *
-Edit C<index.html.in> on website.
+Edit F<index.html.in> on website.
=item *
@@ -4613,7 +4613,7 @@ to 31 slots, but some of these are used for other
purposes.
One virtual disk is used by libguestfs internally.
Before libguestfs 1.19.7, disk names had to be a single character
-(eg. C</dev/sda> through C</dev/sdz>), and since one disk is
reserved,
+(eg. F</dev/sda> through F</dev/sdz>), and since one disk is
reserved,
that meant the limit was 25. This has been fixed in more recent
versions.
@@ -4625,7 +4625,7 @@ L</HOTPLUGGING>.
Virtio limits the maximum number of partitions per disk to B<15>.
This is because it reserves 4 bits for the minor device number (thus
-C</dev/vda>, and C</dev/vda1> through C</dev/vda15>).
+F</dev/vda>, and F</dev/vda1> through F</dev/vda15>).
If you attach a disk with more than 15 partitions, the extra
partitions are ignored by libguestfs.
@@ -4707,7 +4707,7 @@ using a supermin appliance. The appliance is cached and
shared
between all handles which have the same effective user ID.
If C<LIBGUESTFS_CACHEDIR> is not set, then C<TMPDIR> is used. If
-C<TMPDIR> is not set, then C</var/tmp> is used.
+C<TMPDIR> is not set, then F</var/tmp> is used.
See also L</LIBGUESTFS_TMPDIR>, L</guestfs_set_cachedir>.
@@ -4746,7 +4746,7 @@ The location where libguestfs will store temporary files
used
by each handle.
If C<LIBGUESTFS_TMPDIR> is not set, then C<TMPDIR> is used. If
-C<TMPDIR> is not set, then C</tmp> is used.
+C<TMPDIR> is not set, then F</tmp> is used.
See also L</LIBGUESTFS_CACHEDIR>, L</guestfs_set_tmpdir>.
diff --git a/sysprep/virt-sysprep.pod b/sysprep/virt-sysprep.pod
index 2de46f2..ad24550 100644
--- a/sysprep/virt-sysprep.pod
+++ b/sysprep/virt-sysprep.pod
@@ -29,7 +29,7 @@ even in this case it would be better to change the permissions
on the
disk image to be writable as the non-root user running virt-sysprep.
"Sysprep" stands for "system preparation" tool. The name
comes from
-the Microsoft program C<sysprep.exe> which is used to unconfigure
+the Microsoft program F<sysprep.exe> which is used to unconfigure
Windows machines in preparation for cloning them. Having said that,
virt-sysprep does I<not> currently work on Microsoft Windows guests.
We plan to support Windows sysprepping in a future version, and we
@@ -159,12 +159,12 @@ For example:
virt-sysprep --format raw -a disk.img
-forces raw format (no auto-detection) for C<disk.img>.
+forces raw format (no auto-detection) for F<disk.img>.
virt-sysprep --format raw -a disk.img --format auto -a another.img
-forces raw format (no auto-detection) for C<disk.img> and reverts to
-auto-detection for C<another.img>.
+forces raw format (no auto-detection) for F<disk.img> and reverts to
+auto-detection for F<another.img>.
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
@@ -209,7 +209,7 @@ will mount the root directory with C<notime>. This
example:
--mount-options "/:noatime;/var:rw,nodiratime"
-will do the same, plus mount C</var> with C<rw,nodiratime>.
+will do the same, plus mount F</var> with C<rw,nodiratime>.
=item B<-q>
@@ -536,13 +536,13 @@ This can point to the directory containing data files used
for Windows
firstboot installation.
Normally you do not need to set this. If not set, a compiled-in
-default will be used (something like C</usr/share/virt-tools>).
+default will be used (something like F</usr/share/virt-tools>).
This directory may contain the following files:
=over 4
-=item C<rhsrvany.exe>
+=item F<rhsrvany.exe>
This is the RHSrvAny Windows binary, used to install a "firstboot"
script in Windows guests. It is required if you intend to use the
diff --git a/v2v/test-harness/virt-v2v-test-harness.pod
b/v2v/test-harness/virt-v2v-test-harness.pod
index 965c4e9..77d459d 100644
--- a/v2v/test-harness/virt-v2v-test-harness.pod
+++ b/v2v/test-harness/virt-v2v-test-harness.pod
@@ -156,7 +156,7 @@ The test itself - see below.
=head2 WRITING THE TEST
-The test file (C<*.ml>) is used to control the test harness, and
+The test file (F<*.ml>) is used to control the test harness, and
minimally it would look something like this:
open V2v_test_harness
@@ -171,7 +171,7 @@ That would instruct the test harness to:
=item *
-Uncompress C<I<short_name>.img.xz>
+Uncompress F<I<short_name>.img.xz>
=item *
@@ -201,7 +201,7 @@ page. To do that you have to supply a C<~test_plan>
parameter:
For an even better test, you can supply post-conversion and post-boot
test cases which examine the disk image (using libguestfs) to verify
that files have been created, modified or deleted as expected within
-the disk image. See C<V2v_test_harness.mli> for more information on
+the disk image. See F<V2v_test_harness.mli> for more information on
how to do that.
=head2 FILES GENERATED BY RUNNING THE TEST
@@ -243,7 +243,7 @@ disk space.
=over 4
-=item C<$ocamllibdir/v2v_test_harness/v2v_test_harness.mli>
+=item F<$ocamllibdir/v2v_test_harness/v2v_test_harness.mli>
The test library interface. Read this for detailed programming
documentation.
diff --git a/v2v/virt-v2v.pod b/v2v/virt-v2v.pod
index b49de61..f5dfe24 100644
--- a/v2v/virt-v2v.pod
+++ b/v2v/virt-v2v.pod
@@ -88,7 +88,7 @@ locally under libvirt.
In this case you will most likely have to run virt-v2v as C<root>,
since it needs to talk to the system libvirt daemon and copy the guest
-disks to C</var/lib/libvirt/images>.
+disks to F</var/lib/libvirt/images>.
For more information see L</INPUT FROM VMWARE VCENTER SERVER> below.
@@ -126,8 +126,8 @@ run on KVM, you have two options. The simplest way is to
try:
virt-v2v -i disk disk.img -o local -os /var/tmp
-where virt-v2v guesses everything about the input C<disk.img> and (in
-this case) writes the converted result to C</var/tmp>.
+where virt-v2v guesses everything about the input F<disk.img> and (in
+this case) writes the converted result to F</var/tmp>.
A more complex method is to write some
L<libvirt XML|http://libvirt.org/formatdomain.html> describing the
@@ -136,7 +136,7 @@ libvirt XML, then so much the better). You can then do:
virt-v2v -i libvirtxml guest-domain.xml -o local -os /var/tmp
-Since C<guest-domain.xml> contains the path(s) to the guest disk
+Since F<guest-domain.xml> contains the path(s) to the guest disk
image(s) you do not need to specify the name of the disk image on the
command line.
@@ -463,7 +463,7 @@ Set the output method to I<vdsm>.
This mode is similar to I<-o rhev>, but the full path to the
data domain must be given:
-C</rhev/data-center/E<lt>data-center-uuidE<gt>/E<lt>data-domain-uuidE<gt>>.
+F</rhev/data-center/E<lt>data-center-uuidE<gt>/E<lt>data-domain-uuidE<gt>>.
This mode is only used when virt-v2v runs under VDSM control.
=item B<-oa sparse>
@@ -557,7 +557,7 @@ Choose the root filesystem to be converted.
In the case where the virtual machine is dual-boot or multi-boot, or
where the VM has other filesystems that look like operating systems,
this option can be used to select the root filesystem (a.k.a. C<C:>
-drive or C</>) of the operating system that is to be converted. The
+drive or F</>) of the operating system that is to be converted. The
Windows Recovery Console, certain attached DVD drives, and bugs in
libguestfs inspection heuristics, can make a guest look like a
multi-boot operating system.
@@ -582,7 +582,7 @@ device, then virt-v2v will fail.
Note that there is a bug in grub which prevents it from successfully
booting a multiboot system if VirtIO is enabled. Grub is only able to
boot an operating system from the first VirtIO disk. Specifically,
-C</boot> must be on the first VirtIO disk, and it cannot chainload an
+F</boot> must be on the first VirtIO disk, and it cannot chainload an
OS which is not in the first VirtIO disk.
=item B<--vdsm-image-uuid> UUID
@@ -753,7 +753,7 @@ L<https://bugzilla.redhat.com/show_bug.cgi?id=244636>
=head2 Boot failure: 0x0000007B
This boot failure is caused by Windows being unable to find or load
-the right disk driver (eg. C<viostor.sys>). If you experience this
+the right disk driver (eg. F<viostor.sys>). If you experience this
error, here are some things to check:
=over 4
@@ -766,7 +766,7 @@ conversion.
=item *
Check you have the Windows virtio drivers available in
-C</usr/share/virtio-win>, and that virt-v2v did not print any warning
+F</usr/share/virtio-win>, and that virt-v2v did not print any warning
about not being able to install virtio drivers.
On S<Red Hat Enterprise Linux 7>, you will need to install the signed
@@ -799,7 +799,7 @@ Policy-like prohibitions on installing or using new drivers.
=item *
-Enable boot debugging and check the C<viostor.sys> driver is being
+Enable boot debugging and check the F<viostor.sys> driver is being
loaded.
=back
@@ -1078,7 +1078,7 @@ contents.
=head2 OVA: IMPORTING A GUEST
-To import an OVA file called C<VM.ova>, do;
+To import an OVA file called F<VM.ova>, do;
$ virt-v2v -i ova VM.ova -o local -os /var/tmp
@@ -1102,7 +1102,7 @@ Currently you must enable passwordless SSH access to the
remote Xen host
from the virt-v2v conversion server.
You must also use ssh-agent, and add your ssh public key to
-C</root/.ssh/authorized_keys> (on the Xen host).
+F</root/.ssh/authorized_keys> (on the Xen host).
After doing this, you should check that passwordless access works
from the virt-v2v server to the Xen host. For example:
@@ -1187,7 +1187,7 @@ metadata into a local temporary directory:
virt-v2v [...] -o local -os /var/tmp
-This creates two (or more) files in C</var/tmp> called:
+This creates two (or more) files in F</var/tmp> called:
/var/tmp/NAME.xml # the libvirt XML (metadata)
/var/tmp/NAME-sda # the guest's first disk
@@ -1204,7 +1204,7 @@ Upload the converted disk(s) into the storage pool called
C<POOL>:
=item 3.
-Edit C</var/tmp/NAME.xml> to change C</var/tmp/NAME-sda> to the
pool
+Edit F</var/tmp/NAME.xml> to change F</var/tmp/NAME-sda> to the
pool
name. In other words, locate the following bit of XML:
<disk type='file' device='disk'>
@@ -1274,7 +1274,7 @@ possible.
=head2 Disk space
Virt-v2v places potentially large temporary files in C<$TMPDIR> (which
-is C</var/tmp> if you don't set it). Using tmpfs is a bad idea.
+is F</var/tmp> if you don't set it). Using tmpfs is a bad idea.
For each guest disk, an overlay is stored temporarily. This stores
the changes made during conversion, and is used as a cache. The
@@ -1366,7 +1366,7 @@ to perform the conversion. Currently it checks:
Minimum free space: 20 MB
-=item Linux C</boot>
+=item Linux F</boot>
Minimum free space: 50 MB
@@ -1412,7 +1412,7 @@ manually change ownership after virt-v2v has finished.
When using I<-o libvirt>, you may need to run virt-v2v as root so that
it can write to the libvirt system instance (ie. C<qemu:///system>)
and to the default location for disk images (usually
-C</var/lib/libvirt/images>).
+F</var/lib/libvirt/images>).
You can avoid this by setting up libvirt connection authentication,
see L<http://libvirt.org/auth.html>. Alternatively, use
@@ -1437,7 +1437,7 @@ generally hides the true reason for the failure.
There are two log files of interest. The first is stored on the
RHEV-M server itself, and is called
-C</var/log/ovirt-engine/engine.log>
+F</var/log/ovirt-engine/engine.log>
The second file, which is the most useful, is found on the SPM host
(SPM stands for "Storage Pool Manager"). This is a RHEV node that is
@@ -1445,7 +1445,7 @@ elected to do all metadata modifications in the data
center, such as
image or snapshot creation. You can find out which host is the
current SPM from the "Hosts" tab "Spm Status" column. Once
you have
located the SPM, log into it and grab the file
-C</var/log/vdsm/vdsm.log> which will contain detailed error messages
+F</var/log/vdsm/vdsm.log> which will contain detailed error messages
from low-level commands.
=head1 MINIMAL XML FOR -i libvirtxml OPTION
@@ -1548,7 +1548,7 @@ option at all. The option was added when virt-v2v was
rewritten in 2014.
=over 4
-=item C</usr/share/virtio-win>
+=item F</usr/share/virtio-win>
(Optional)
@@ -1575,13 +1575,13 @@ This can point to the directory containing data files
used for Windows
conversion.
Normally you do not need to set this. If not set, a compiled-in
-default will be used (something like C</usr/share/virt-tools>).
+default will be used (something like F</usr/share/virt-tools>).
This directory may contain the following files:
=over 4
-=item C<rhsrvany.exe>
+=item F<rhsrvany.exe>
(Required when doing conversions of Windows guests)
@@ -1590,7 +1590,7 @@ script in the guest during conversion of Windows guests.
See also: C<https://github.com/rwmjones/rhsrvany>
-=item C<rhev-apt.exe>
+=item F<rhev-apt.exe>
(Optional)
--
2.3.1
Pino Toscano
2015-Jun-15 14:06 UTC
Re: [Libguestfs] [PATCH] pod: Use F<> for filenames instead of C<>.
On Sunday 14 June 2015 14:37:26 Richard W.M. Jones wrote:> --- a/generator/actions.ml > +++ b/generator/actions.ml > @@ -615,7 +615,7 @@ against. > Note that because of dynamic linking this is not necessarily > the version of libguestfs that you compiled against. You can > compile the program, and then at runtime dynamically link > -against a completely different C<libguestfs.so> library. > +against a completely different F<libguestfs.so> library. > > This call was added in version C<1.0.58>. In previous > versions of libguestfs there was no way to get the version > @@ -830,7 +830,7 @@ to specify the QEMU interface emulation to use at run time." }; > ]; > shortdesc = "detect the architecture of a binary file"; > longdesc = "\ > -This detects the architecture of the binary C<filename>, > +This detects the architecture of the binary F<filename>, > and returns it if known.(and other similar cases here in actions.ml) Considering that "filename" is the name of parameter, shouldn't it be better left with C<>?> @@ -81,9 +81,9 @@ C<VIRT_P2V_DATA_DIR> environment variable. > > =item C<$datadir/issue> > > -=item C<$datadir/launch-virt-p2v.in> > +=item F<$datadir/launch-virt-p2v.in> > > -=item C<$datadir/p2v.service> > +=item F<$datadir/p2v.service>I guess C<$datadir/issue> too? The rest seems fine to me. Thanks, -- Pino Toscano
Richard W.M. Jones
2015-Jun-15 14:43 UTC
Re: [Libguestfs] [PATCH] pod: Use F<> for filenames instead of C<>.
On Mon, Jun 15, 2015 at 04:06:09PM +0200, Pino Toscano wrote:> On Sunday 14 June 2015 14:37:26 Richard W.M. Jones wrote: > > --- a/generator/actions.ml > > +++ b/generator/actions.ml > > @@ -615,7 +615,7 @@ against. > > Note that because of dynamic linking this is not necessarily > > the version of libguestfs that you compiled against. You can > > compile the program, and then at runtime dynamically link > > -against a completely different C<libguestfs.so> library. > > +against a completely different F<libguestfs.so> library. > > > > This call was added in version C<1.0.58>. In previous > > versions of libguestfs there was no way to get the version > > @@ -830,7 +830,7 @@ to specify the QEMU interface emulation to use at run time." }; > > ]; > > shortdesc = "detect the architecture of a binary file"; > > longdesc = "\ > > -This detects the architecture of the binary C<filename>, > > +This detects the architecture of the binary F<filename>, > > and returns it if known. > > (and other similar cases here in actions.ml) > > Considering that "filename" is the name of parameter, shouldn't it be > better left with C<>?It's a bit of a tricky corner case, but at least I changed all filename parameters to F<...> (fairly) consistently :-)> > @@ -81,9 +81,9 @@ C<VIRT_P2V_DATA_DIR> environment variable. > > > > =item C<$datadir/issue> > > > > -=item C<$datadir/launch-virt-p2v.in> > > +=item F<$datadir/launch-virt-p2v.in> > > > > -=item C<$datadir/p2v.service> > > +=item F<$datadir/p2v.service> > > I guess C<$datadir/issue> too?Yup - fixed, thanks. There was another one in virt-p2v-make-kickstart which I also fixed. Rich.> The rest seems fine to me. > > Thanks, > -- > Pino Toscano > > _______________________________________________ > Libguestfs mailing list > Libguestfs@redhat.com > https://www.redhat.com/mailman/listinfo/libguestfs-- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-builder quickly builds VMs from scratch http://libguestfs.org/virt-builder.1.html
Maybe Matching Threads
- [PATCH 5/5] lib: Deprecate old SELinux APIs, rewrite SELinux documentation.
- [PATCH v2 6/7] lib: Deprecate old SELinux APIs, rewrite SELinux documentation.
- [PATCH] build: Add common CLEANFILES and DISTCLEANFILES to common-rules.mk.
- [PATCH] Use Unicode single quotes ‘’ in place of short single quoted strings throughout.
- [PATCH] generator: Add visibility to action struct