Hello! Currently I am marking packets with IPMARK, and then using following rules: 1: class add dev eth0 parent 1:4 classid 1:100a htb rate $rate ceil $ceil quantum 1600 2: qdisc add dev eth0 parent 1:100a handle 100a:0 sfq perturb 10 3: filter add dev eth0 protocol ip parent 1:0 pref 30 handle 4106 fw classid 1:100a 4: class add dev eth1 parent 1:2 classid 1:100a htb rate $rate ceil $ceil quantum 1600 5: qdisc add dev eth1 parent 1:100a handle 100a:0 sfq perturb 10 6: filter add dev eth1 protocol ip parent 1:0 pref 30 u32 match ip dst 10.100.0.10 flowid 1:100a Tried to remove line 3 and just putting one line instead: filter add dev eth0 parent 1:0 protocol ip pref 30 fw But it does not work. Any ideas? -- Michał Margula, alchemyx@uznam.net.pl, http://alchemyx.uznam.net.pl/ "W życiu piękne są tylko chwile" [Ryszard Riedel]
Michał Margula wrote:> Hello! > > Currently I am marking packets with IPMARK, and then using following rules: > > 1: class add dev eth0 parent 1:4 classid 1:100a htb rate $rate ceil > $ceil quantum 1600 > 2: qdisc add dev eth0 parent 1:100a handle 100a:0 sfq perturb 10 > 3: filter add dev eth0 protocol ip parent 1:0 pref 30 handle 4106 fw > classid 1:100a > 4: class add dev eth1 parent 1:2 classid 1:100a htb rate $rate ceil > $ceil quantum 1600 > 5: qdisc add dev eth1 parent 1:100a handle 100a:0 sfq perturb 10 > 6: filter add dev eth1 protocol ip parent 1:0 pref 30 u32 match ip dst > 10.100.0.10 flowid 1:100a > > Tried to remove line 3 and just putting one line instead: > > filter add dev eth0 parent 1:0 protocol ip pref 30 fw > > But it does not work. Any ideas? >You need to mark with the major number aswell so mark with 0x1100a Andy.