I have 1 100MB NIC with two 2MB-subnets trough a router behind it. I''d
like to create multiple default classes:
1: +
|\_ 1:10 default, ceiling 100000kbit, rate 96000kbit
|
|\_ 1:11 ceiling 2048kbit, rate 2048kbit
| |
| |\_1:110 ceiling 2048kbit, rate 1536kbit
| \_1:111 ceiling 2048kbit, rate 512kbit (default subnet1)
|
\_ 1:12 ceiling 2048kbit, rate 2048kbit
|
|\_1:120 ceiling 2048kbit, rate 1536kbit
\_1:121 ceiling 2048kbit, rate 512kbit (default subnet2)
I want to use 1:110 for subnet1 sport 3389
I want to use 1:111 for subnet1 (the rest)
I want to use 1:120 for subnet2 sport 3389
I want to use 1:121 for subnet2 (the rest)
When selecting
u32 match ip dst 10.106.18.0/24 \
match ip protocol 6 0xff \
match ip sport 3389 0xffff \
flowid 1:120
u32 match ip dst 10.106.18.0/24 \
flowid 1:121
All traffic goes to 1:121. The first filter for port 3389 is ok and
works. What am I doing wrong? I''d rather do not use fw selectors. Or
should I solve this problem another way?
Richard.
--
___________________________________________________________________
Recursion: see recursion
+------------------------------------------------------------------+
| Richard Lucassen, Utrecht |
| Public key and email address: |
| http://www.lucassen.org/mail-pubkey.html |
+------------------------------------------------------------------+
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
richard lucassen wrote:> I have 1 100MB NIC with two 2MB-subnets trough a router behind it. I''d > like to create multiple default classes: > > 1: + > |\_ 1:10 default, ceiling 100000kbit, rate 96000kbit > | > |\_ 1:11 ceiling 2048kbit, rate 2048kbit > | | > | |\_1:110 ceiling 2048kbit, rate 1536kbit > | \_1:111 ceiling 2048kbit, rate 512kbit (default subnet1) > | > \_ 1:12 ceiling 2048kbit, rate 2048kbit > | > |\_1:120 ceiling 2048kbit, rate 1536kbit > \_1:121 ceiling 2048kbit, rate 512kbit (default subnet2) > > I want to use 1:110 for subnet1 sport 3389 > I want to use 1:111 for subnet1 (the rest) > I want to use 1:120 for subnet2 sport 3389 > I want to use 1:121 for subnet2 (the rest) > > When selecting > > u32 match ip dst 10.106.18.0/24 \ > match ip protocol 6 0xff \ > match ip sport 3389 0xffff \ > flowid 1:120 > > u32 match ip dst 10.106.18.0/24 \ > flowid 1:121 > > All traffic goes to 1:121. The first filter for port 3389 is ok and > works. What am I doing wrong? I''d rather do not use fw selectors. Or > should I solve this problem another way? > > Richard. >Does it work if you use the prio parameter on the tc filters with 1 for 1:120 rule and 2 for 1.121? Andy. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/