Hi All
Is the filter rule bellow supposed to classify icmp request/reply packets?
$TC filter add dev eth2 protocol ip \
parent 1:0 prio 1 u32 \
match ip dst 192.168.0.1 \
match icmp type 8 0xff flowid 100
$TC filter add dev eth2 protocol ip \
parent 1:0 prio 1 u32 \
match ip dst 192.168.0.1 \
match icmp type 0 0xff flowid 100
it is accepted by tc but I think it is not filtering anything. icmp
packets are going thru default htb class.
How do I "see" if these rules are catching anything? Is there
something
like the -s class option?
Any clues?
--
Ethy H. Brito /"\
InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML
+55 (12) 3941-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
S.J.Campos - Brasil / \
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
