On Monday 16 February 2004 13:42, Rhaoni - Sistêmica
wrote:> Hi List,
>
> Considering this QoS scenario:
>
> tc qdisc add dev eth0 root handle 1: htb default 12
> tc class add dev eth0 parent 1: classid 1:1 htb rate 100kbit ceil
> 100kbps tc class add dev eth0 parent 1:1 classid 1:10 htb rate 30kbit ceil
> 100kbps tc class add dev eth0 parent 1:1 classid 1:11 htb rate 10kbit ceil
> 100kbps tc class add dev eth0 parent 1:1 classid 1:12 htb rate 60kbit ceil
> 100kbps tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 \
> match ip src 1.2.3.4 match ip dport 80 0xffff flowid 1:10
> tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 \
> match ip src 1.2.3.4 flowid 1:11
> tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 \
> match ip dport 80 0xffff flowid 1:10
>
> Here follows my doubts:
>
> Where will be classified a packet coming from 1.2.3.4 port 80 ?
1:10.
> ( just to be sure ''cuz I''m making a very simple QoS
tutorial in portuguese
> brazilian )
>
> Where ca I find a full tc syntax ( I already have the manpage ) and u32
> filter documentation ?
Most of the options depends on what you do with the tc command: adding
filters, qdiscs, classes, ...
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/