LARTC - Feb 2004 - HTB - got mesage "invalid parent ID" is wrong: 1:1

Hi,
I have more ethernet cards. Egress shaping with HTB over eth0 works 
fine, ingress shaping with HTB over IMQ works also fine, but in both of 
cases I use only one class of traffic.

Now I want to divide traffic to 3 classes on other interface (egress to 
ineternal network). I try this command sequense

tc qdisc add dev eth1 root handle 1: htb default 12
tc class add dev eth1 parent 1: classid 1:1 htb rate 2200kbit ceil 2200kbit
tc class add dev eth1 parent 1:1: classid 1:10 htb rate 1816kbit ceil 
2200kbit

but here I got message
Error: argument "invalid parent ID" is wrong: 1:1:

Whats wrong?

Kernel 2.4.23, tc patched (from HTB tarball).

Thanx in advance
regards

Patrick Spousta

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

On Sunday 08 February 2004 10:44, Patrick Spousta wrote:
> Hi,
> I have more ethernet cards. Egress shaping with HTB over eth0 works
> fine, ingress shaping with HTB over IMQ works also fine, but in both of
> cases I use only one class of traffic.
>
> Now I want to divide traffic to 3 classes on other interface (egress to
> ineternal network). I try this command sequense
>
> tc qdisc add dev eth1 root handle 1: htb default 12
> tc class add dev eth1 parent 1: classid 1:1 htb rate 2200kbit ceil 2200kbit
> tc class add dev eth1 parent 1:1: classid 1:10 htb rate 1816kbit ceil
> 2200kbit
You have a 1:1: as parent, it should be 1:1.

Stef

-- 
stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/