Witaj PSC,
W Twoim liście datowanym 14 stycznia 2004 (06:37:53) można przeczytać:
P> Just wondering if someone could answer this question for me.
P> I would like to route public addresses only. Their will be no firewall
P> but maybe a few rules to deny certain types of traffic. Here is the
P> configuration of the router.
P> My provider gave a me a /30 link to their router
P> also they gave me a /25 network for my customers public ip''s
P> Their cisco router has static route entrys for my public subnet
P> The router has been configured as follows
P> eth0 has been configured with :
P> 205.95.67.102/30
P> eth1 is configured as
P> 209.95.45.1/25 and is the gateway for my customers.
just set properly your router default route :)
(guessing the gateway ip :)
ip ro add default via 205.95.67.103 dev eth0
and should work :) (works for me :)
P> Beside ip_forwarding being enabled is their anything that I need to do
P> so my customers can access the ouside and the public to access their
P> ip''s.
P> Thanks in advance for the help
P> _______________________________________________
P> LARTC mailing list / LARTC@mailman.ds9a.nl
P> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
--
Pozdrowienia,
Robert mailto:rkurjata@ire.pw.edu.pl
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/