Hi all, I have to use traffic control sending packets with libpcap. I''m using the following queues: tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 1 tc class add dev eth0 parent 1: classid 1:1 htb rate 75kbps tc class add dev eth0 parent 1: classid 1:2 htb rate 50kbps tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip tos 0xA2 0xff classid 1:2 tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip tos 0xA8 0xff classid 1:1 If I test such system using udp traffic generator it works but when I send the packets using libpcap the filters don''t work and all the traffic is queued via the default class (1:1). How can I fix such problem? Thanks Maurizio Paone _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/