LARTC - Dec 2003 - How to config ip in 2nd lan card in Linux pc and config ip masq?

Hi,
--- "Md.Ahsanul Haque Chowdhury" <ahaque@neksus.com>
wrote:
> (192.168.1.1). But after install the Linux 7.2 in 
how did you get a copy of Linux 7.2? ;)
i''ll safely assume thats RHL 7.2 ...
> /etc/sysconfig/network-
> scripts/  only showing   ifcfg-eth0  no interface is
> showing like ifcfg-eth1.
''netconfig'' would be your best bet. Also, check dmesg,
to see that you card has been detected. If the card is
detected, you can copy ifcfg-eth0 to ifcfg-eth1 and
make the appropriate changes.
> & how to config ip masq to route to get Internet in
> local workstations.?
...just use iptables to masq. your internal subnet;
man iptables.

suraj.

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Dear  Sir,

I have install 2 lan card (Micronet Lan Card) in Linux pc, in 1st lan card I 
will use public ip ( 203.x.x.x) and 2nd lan card I will use private ip 
(192.168.1.1). But after install the Linux 7.2 in  /etc/sysconfig/network-
scripts/  only showing   ifcfg-eth0  no interface is showing like ifcfg-eth1.

My questions are  how to enable or config 2nd lan card and config ip in 2nd lan 
card.?
& how to config ip masq to route to get Internet in local workstations.?

Pls help me to solve these problem.


Thanks & Best regards. 
__________________________
Md. Ahsanul Haque Chowdhury.
E-mail:ahaque@neksus.com , ahaque@link3.net
Web:http://www.neksus.com
Web:http://www.link3.net
Date:2003-12-06.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/