LARTC - Sep 2003 - Ip traffic accounting and HTB

Hi, I''m using HTB for bandwidth control, but i''m still not
sure how to
account the traffic. My config is the following: eth0 goes to internet and
eth1 to the clients(I''m shaping both ifaces). I want to log ip traffic
from and to the clients. Since htb shapes outgoing traffic I''m not sure
how to make the iptables script.

This is the script:

${IPTABLES} -N ZORBCOUNTIN
  ${IPTABLES} -A ZORBCOUNTIN    
  ${IPTABLES} -N ZORBCOUNTOUT
  ${IPTABLES} -A ZORBCOUNTOUT
  ${IPTABLES} -I INPUT  -i $IFACE -j ZORBCOUNTIN  
  ${IPTABLES} -I OUTPUT -o $IFACE -j ZORBCOUNTOUT    
  ${IPTABLES} -N ZORBCOUNT
  ${IPTABLES} -I FORWARD -s $NET -o $IFACE -j ZORBCOUNT
  ${IPTABLES} -I FORWARD -d $NET -i $IFACE -j ZORBCOUNT  		    
  
grep "^" $IPS | while read IP;
	do
     ${IPTABLES} -A ZORBCOUNT -s $IP
     ${IPTABLES} -A ZORBCOUNT -d $IP
    done;
  ${IPTABLES} -A ZORBCOUNT -s $NET
  ${IPTABLES} -A ZORBCOUNT -d $NET







Does iptables count the shaped traffic or the whole traffic without shaping?
which interface should i use in the iptables script, eth0 or eth1 ? 

Thank you.

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi, I''m using HTB for bandwidth control, but i''m still not
sure how to
account the traffic. My config is the following: eth0 goes to internet and
eth1 to the clients(I''m shaping both ifaces). I want to log ip traffic
from and to the clients. Since htb shapes outgoing traffic I''m not sure
how to make the iptables script.

This is the script:

${IPTABLES} -N ZORBCOUNTIN
  ${IPTABLES} -A ZORBCOUNTIN    
  ${IPTABLES} -N ZORBCOUNTOUT
  ${IPTABLES} -A ZORBCOUNTOUT
  ${IPTABLES} -I INPUT  -i $IFACE -j ZORBCOUNTIN  
  ${IPTABLES} -I OUTPUT -o $IFACE -j ZORBCOUNTOUT    
  ${IPTABLES} -N ZORBCOUNT
  ${IPTABLES} -I FORWARD -s $NET -o $IFACE -j ZORBCOUNT
  ${IPTABLES} -I FORWARD -d $NET -i $IFACE -j ZORBCOUNT  		    
  
grep "^" $IPS | while read IP;
	do
     ${IPTABLES} -A ZORBCOUNT -s $IP
     ${IPTABLES} -A ZORBCOUNT -d $IP
    done;
  ${IPTABLES} -A ZORBCOUNT -s $NET
  ${IPTABLES} -A ZORBCOUNT -d $NET







Does iptables count the shaped traffic or the whole traffic without shaping?
which interface should i use in the iptables script, eth0 or eth1 ? 

Thank you.

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/