LARTC - Jul 2003 - Filter problem

I again.
I have the following statements:

#Initializing traffic control...
tc qdisc add dev br0 root handle 1:0 htb

#Loading queue disciplines for plis230 network...
tc class add dev br0 parent 1:0 classid 1:1 htb rate 512kbit ceil 512kbit

#Loading queue disciplines for pmad048 network...
tc class add dev br0 parent 1:1 classid 1:20 htb rate 30kbit ceil 30kbit
#server queue
tc class add dev br0 parent 1:20 classid 1:21 htb rate 6kbit ceil 30kbit
tc filter add dev br0 protocol ip parent 1:0 prio 1 u32 match ip dst 
57.227.233.3 flowid 1:21
tc qdisc add dev br0 parent 1:21 handle 200:0 sfq perturb 10


--After pinging host 57.227.233.3 a while why I get the result of 0 
packets sent through that filter?

bridge:/etc/rc.d # tc -s -d qdisc show dev br0;tc -s -d class show dev br0
qdisc htb 1: r2q 10 default 0 direct_packets_stat 128 ver 3.10
Sent 20832 bytes 128 pkts (dropped 0, overlimits 0)

class htb 1:1 root rate 512Kbit ceil 512Kbit burst 2254b/8 mpu 0b cburst 
2254b/8 mpu 0b level 7
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0
tokens: 28187 ctokens: 28187

class htb 1:20 parent 1:1 rate 30Kbit ceil 30Kbit burst 1637b/8 mpu 0b 
cburst 1637b/8 mpu 0b level 6
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0
tokens: 349439 ctokens: 349439

class htb 1:21 parent 1:20 prio 0 quantum 1000 rate 6Kbit ceil 30Kbit 
burst 1606b/8 mpu 0b cburst 1637b/8 mpu 0b level 0
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0
tokens: 1714132 ctokens: 349439


Thankx a lot,
-vcf

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

On Thursday 17 July 2003 10:49, Vitor Carlos Flausino
wrote:
> I again.
> I have the following statements:
Maybe this can help :

http://www.docum.org/stef.coene/qos/faq/cache/41.html

Stef
-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

I found what the problem was.

Insted of br0 in configurations, if I use eth0 it works (hum... queer).

Thkx any way,
-vcf


Stef Coene wrote:
>On Thursday 17 July 2003 10:49, Vitor Carlos Flausino wrote:
>  
>
>>I again.
>>I have the following statements:
>>    
>>
>Maybe this can help :
>
>http://www.docum.org/stef.coene/qos/faq/cache/41.html
>
>Stef
>  
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/