Hi I am busy configuring a bandwidth manager that acts as a bridge, the problem that I am currently experiencing is that it works perfectly for smaller classes like 32kbit, 42kbit etc. As soon as I create a class of 3072kbit or bigger it''s constant download is at 6.2mbps. These are my commands that I used [root@irulan scripts]# tc class show dev eth0 [root@irulan scripts]# tc qdisc add dev eth0 root handle 1: htb [root@irulan scripts]# tc class add dev eth0 parent 1: classid 1:1 htb rate 18mbit ceil 18mbit [root@irulan scripts]# tc class add dev eth0 parent 1:1 classid 1:10 htb rate 3072kbit ceil 3072kbit [root@irulan scripts]# tc qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10 [root@irulan scripts]# tc filter add dev eth0 protocol ip parent 1: prio 0 u32 match ip dst 192.168.10.8/29 flowid 1:10 I even changed it to this and I am still experiencing the same problem. [root@irulan scripts]# tc filter add dev eth0 protocol ip parent 1: prio 0 u32 match ip dst 192.168.10.10 flowid 1:10 I do ftp transfers and I use Iptraf to monitor the details I also used iperf and I am getting the same results Thank you. -- Warm Regards tis _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/